summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-09-29dmaengine: ti: k3-udma: Respond TX done if DMA_PREP_INTERRUPT is not requestedVaishnav Achath
If the DMA consumer driver does not expect the callback for TX done, then we need not perform the channel RT byte counter calculations and estimate the completion but return complete on first attempt itself.This assumes that the consumer who did not request DMA_PREP_INTERRUPT has its own mechanism for understanding TX completion, example: MCSPI EOW interrupt can be used as TX completion signal for a SPI transaction. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220914110049.5842-1-vaishnav.a@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: zynqmp_dma: Add device_synchronize supportSwati Agarwal
dmaengine_synchronize implementation is required to synchronize proper termination of current transfers so that any memory resources are not freed while still in use. Implement this callback in the driver so that framework can use the same (in dmaengine_terminate_sync/ dmaengine_synchronize). Signed-off-by: Swati Agarwal <swati.agarwal@amd.com> Link: https://lore.kernel.org/r/20220915090516.5812-1-swati.agarwal@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: dw-edma: Remove runtime PM supportManivannan Sadhasivam
Currently, the dw-edma driver enables the runtime_pm for parent device (chip->dev) and increments/decrements the refcount during alloc/free chan resources callbacks. This leads to a problem when the eDMA driver has been probed, but the channels were not used. This scenario can happen when the DW PCIe driver probes eDMA driver successfully, but the PCI EPF driver decides not to use eDMA channels and use iATU instead for PCI transfers. In this case, the underlying device would be runtime suspended due to pm_runtime_enable() in dw_edma_probe() and the PCI EPF driver would have no knowledge of it. Ideally, the eDMA driver should not be the one doing the runtime PM of the parent device. The responsibility should instead belong to the client drivers like PCI EPF. So let's remove the runtime PM support from eDMA driver. Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Frank Li <Frank.Li@nxp.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20220910054700.12205-1-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: add configuration for concurrent batch descriptor processingDave Jiang
Add sysfs knob to allow control of the number of batch descriptors that can be concurrently processed by an engine in the group as a fraction of the Maximum Work Descriptors in Progress value specfied in ENGCAP register. This control knob is part of toggle for QoS control. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-6-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: add configuration for concurrent work descriptor processingDave Jiang
Add sysfs knob to allow control of the number of work descriptors that can be concurrently processed by an engine in the group as a fraction of the Maximum Work Descriptors in Progress value specified in ENGCAP register. This control knob is part of toggle for QoS control. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-5-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: add WQ operation cap restriction supportDave Jiang
DSA 2.0 add the capability of configuring DMA ops on a per workqueue basis. This means that certain ops can be disabled by the system administrator for certain wq. By default, all ops are available. A bitmap is used to store the ops due to total op size of 256 bits and it is more convenient to use a range list to specify which bits are enabled. One of the usage to support this is for VM migration between different iteration of devices. The newer ops are disabled in order to allow guest to migrate to a host that only support older ops. Another usage is to restrict the WQ to certain operations for QoS of performance. A sysfs of ops_config attribute is added per wq. It is only usable when the ops_config bit is set under WQ_CAP register. This means that this attribute will return -EOPNOTSUPP on DSA 1.x devices. The expected input is a range list for the bits per operation the WQ supports. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-4-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmanegine: idxd: reformat opcap output to match bitmap_parse() inputDave Jiang
To make input and output consistent and prepping for the per WQ operation configuration support, change the output of opcap display to match the input that is expected by bitmap_parse() helper function. The output will be a bitmap with field width as the number of bits using the %*pb format specifier for printk() family. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-3-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: convert ats_dis to a wq flagDave Jiang
Make wq attributes access consistent. Convert ats_dis to wq flag WQ_FLAG_ATS_DISABLE. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-2-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()Dave Jiang
User reports observing timer event report channel halted but no error observed in CHANERR register. The driver finished self-test and released channel resources. Debug shows that __cleanup() can call mod_timer() after the timer has been deleted and thus resurrect the timer. While harmless, it causes suprious error message to be emitted. Use mod_timer_pending() call to prevent deleted timer from being resurrected. Fixes: 3372de5813e4 ("dmaengine: ioatdma: removal of dma_v3.c and relevant ioat3 references") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166360672197.3851724.17040290563764838369.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sgChristian Marangi
The calling convention for pre_slave_sg is to return NULL on error and provide an error log to the system. Qcom-adm instead provide error pointer when an error occur. This indirectly cause kernel panic for example for the nandc driver that checks only if the pointer returned by device_prep_slave_sg is not NULL. Returning an error pointer makes nandc think the device_prep_slave_sg function correctly completed and makes the kernel panics later in the code. While nandc is the one that makes the kernel crash, it was pointed out that the real problem is qcom-adm not following calling convention for that function. To fix this, drop returning error pointer and return NULL with an error log. Fixes: 03de6b273805 ("dmaengine: qcom-adm: stop abusing slave_id config") Fixes: 5c9f8c2dbdbe ("dmaengine: qcom: Add ADM driver") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org # v5.11+ Link: https://lore.kernel.org/r/20220916041256.7104-1-ansuelsmth@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: qcom-adm: fix wrong sizeof config in slave_configChristian Marangi
Fix broken slave_config function that uncorrectly compare the peripheral_size with the size of the config pointer instead of the size of the config struct. This cause the crci value to be ignored and cause a kernel panic on any slave that use adm driver. To fix this, compare to the size of the struct and NOT the size of the pointer. Fixes: 03de6b273805 ("dmaengine: qcom-adm: stop abusing slave_id config") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org # v5.17+ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220915204844.3838-1-ansuelsmth@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220928145609.375860-4-dmitry.baryshkov@linaro.org
2022-09-29clk: qcom: gcc-msm8939: use parent_hws where possibleDmitry Baryshkov
Use parent_hws instead of hanving parent_data with just a single .hw entry to speed up and simplify parent lookups. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220928145609.375860-3-dmitry.baryshkov@linaro.org
2022-09-29clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscsLuca Weiss
The USB controllers on sm6350 do not retain the state when the system goes into low power state and the GDSCs are turned off. This can be observed by the USB connection not coming back alive after putting the device into suspend, essentially breaking USB. Fix this by updating the .pwrsts for the USB GDSCs so they only transition to retention state in low power. Cc: Rajendra Nayak <quic_rjendra@quicinc.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220928132853.179425-1-luca.weiss@fairphone.com
2022-09-29clk: qcom: gcc-sc8280xp: use retention for USB power domainsJohan Hovold
Since commit d399723950c4 ("clk: qcom: gdsc: Fix the handling of PWRSTS_RET support) retention mode can be used on sc8280xp to maintain state during suspend instead of leaving the domain always on. This is needed to eventually allow the parent CX domain to be powered down during suspend. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220929161124.18138-1-johan+linaro@kernel.org
2022-09-29clk: qcom: gdsc: add missing error handlingJohan Hovold
Since commit 7eb231c337e0 ("PM / Domains: Convert pm_genpd_init() to return an error code") pm_genpd_init() can return an error which the caller must handle. The current error handling was also incomplete as the runtime PM and regulator use counts were not balanced in all error paths. Add the missing error handling to the GDSC initialisation to avoid continuing as if nothing happened on errors. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220929155816.17425-1-johan+linaro@kernel.org
2022-09-29drm/hyperv: Add ratelimit on error messageSaurabh Sengar
Due to a full ring buffer, the driver may be unable to send updates to the Hyper-V host. But outputing the error message can make the problem worse because console output is also typically written to the frame buffer. Rate limiting the error message, also output the error code for additional diagnosability. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1662736193-31379-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-09-29Merge branch irq/misc-6.1 into irq/irqchip-nextMarc Zyngier
* irq/misc-6.1: : . : Misc irqchip updates for 6.1: : : - Allow generic irqchip support without selecting CONFIG_OF_IRQ : : - Fix a couple of bindings for TI interrupts controllers : : - Yet another binding update for a Renesas SoC : : - The obligatory fixes from the spelling police : . dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support irqchip/gic-v3: Fix typo in comment dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells irqchip: Make irqchip_init() usable on pure ACPI systems Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-09-29Merge branch irq/rtl-imap-deprecation into irq/irqchip-nextMarc Zyngier
* irq/rtl-imap-deprecation: : . : Deprecate interrupt-map property for realtek-rtl irqchip : : Patches from Sander Vanheule. : . irqchip/realtek-rtl: use parent interrupts dt-bindings: interrupt-controller: realtek,rtl-intc: require parents irqchip/realtek-rtl: use irq_domain_add_linear() Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-09-29dmaengine: ti: k3-psil: add additional TX threads for j721eMatt Ranostay
Add matching PSI-L threads mapping for transmission DMA channels on the J721E platform. Signed-off-by: Matt Ranostay <mranostay@ti.com> Link: https://lore.kernel.org/r/20220919205931.8397-2-mranostay@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ti: k3-psil: add additional TX threads for j7200Matt Ranostay
Add matching PSI-L threads mapping for transmission DMA channels on the J7200 platform. Signed-off-by: Matt Ranostay <mranostay@ti.com> Link: https://lore.kernel.org/r/20220919205931.8397-3-mranostay@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: apple-admac: Trigger shared resetMartin Povišer
If a reset domain is attached to the device, obtain a shared reference to it and trigger it. Typically on a chip the ADMAC controller will share a reset domain with the MCA peripheral. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220918095845.68860-5-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: apple-admac: Do not use devres for IRQsMartin Povišer
This is in advance of adding support for triggering the reset signal to the peripheral, since registering the IRQ handler will have to be sequenced with it. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220918095845.68860-4-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29irqchip: Add IMX MU MSI controller driverFrank Li
The MU block found in a number of Freescale/NXP SoCs supports generating IRQs by writing data to a register. This enables the MU block to be used as a MSI controller, by leveraging the platform-MSI API. Signed-off-by: Frank Li <Frank.Li@nxp.com> [maz: dropped pointless dma-iommu.h and of_pci.h includes] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220922161246.20586-4-Frank.Li@nxp.com
2022-09-29dmaengine: ti: edma: Remove some unused functionsJiapeng Chong
These functions are defined in the edma.c file, but not called elsewhere, so delete these unused functions. drivers/dma/ti/edma.c:746:31: warning: unused function 'to_edma_cc'. drivers/dma/ti/edma.c:420:20: warning: unused function 'edma_param_or'. drivers/dma/ti/edma.c:414:20: warning: unused function 'edma_param_and'. drivers/dma/ti/edma.c:402:20: warning: unused function 'edma_param_write'. drivers/dma/ti/edma.c:373:28: warning: unused function 'edma_shadow0_read'. drivers/dma/ti/edma.c:396:28: warning: unused function 'edma_param_read'. drivers/dma/ti/edma.c:355:20: warning: unused function 'edma_or_array'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2152 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220914101943.83929-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: sh: rcar-dmac: Replace zero-length arrays with ↵Gustavo A. R. Silva
DECLARE_FLEX_ARRAY() helper Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/217 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/YzIdsJqsR3LH2qEK@work Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29Merge tag 'net-6.0-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from wifi and can. Current release - regressions: - phy: don't WARN for PHY_UP state in mdio_bus_phy_resume() - wifi: fix locking in mac80211 mlme - eth: - revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()" - mlxbf_gige: fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe Previous releases - regressions: - wifi: fix regression with non-QoS drivers Previous releases - always broken: - mptcp: fix unreleased socket in accept queue - wifi: - don't start TX with fq->lock to fix deadlock - fix memory corruption in minstrel_ht_update_rates() - eth: - macb: fix ZynqMP SGMII non-wakeup source resume failure - mt7531: only do PLL once after the reset - usbnet: fix memory leak in usbnet_disconnect() Misc: - usb: qmi_wwan: add new usb-id for Dell branded EM7455" * tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits) mptcp: fix unreleased socket in accept queue mptcp: factor out __mptcp_close() without socket lock net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2} net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge can: c_can: don't cache TX messages for C_CAN cores ice: xsk: drop power of 2 ring size restriction for AF_XDP ice: xsk: change batched Tx descriptor cleaning net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455 selftests: Fix the if conditions of in test_extra_filter() net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume() net: stmmac: power up/down serdes in stmmac_open/release wifi: mac80211: mlme: Fix double unlock on assoc success handling wifi: mac80211: mlme: Fix missing unlock on beacon RX wifi: mac80211: fix memory corruption in minstrel_ht_update_rates() wifi: mac80211: fix regression with non-QoS drivers wifi: mac80211: ensure vif queues are operational after start wifi: mac80211: don't start TX with fq->lock to fix deadlock wifi: cfg80211: fix MCS divisor value net: hippi: Add missing pci_disable_device() in rr_init_one() net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe ...
2022-09-29phy: phy-mtk-dp: make array driving_params static constColin Ian King
Don't populate the read-only array driving_params on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220929130147.97375-1-colin.i.king@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29Merge tag 'input-for-v6.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - small fixes for iqs62x-keys and melfas_mip4 drivers - corrected register address in snvs_pwrkey driver - Synaptic driver will stop trying to use intertouch (native) mode on some Lenovo AMD devices * tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address Input: synaptics - disable Intertouch for Lenovo T14 and P14s AMD G1 Input: iqs62x-keys - drop unused device node references Input: melfas_mip4 - fix return value check in mip4_probe()
2022-09-29spi: spi-gxp: Use devm_platform_ioremap_resource()Yang Yingliang
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220928145256.1879256-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-29regulator: gpio: Add input_supply support in gpio_regulator_configJerome Neanne
This is simillar as fixed-regulator. Used to extract regulator parent from the device tree. Without that property used, the parent regulator can be shut down (if not an always on). Thus leading to inappropriate behavior: On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion. Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Link: https://lore.kernel.org/r/20220929132526.29427-2-jneanne@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-29drm/amd/display: Prevent OTG shutdown during PSR SULeo Li
[Why] Enabling Z10 optimizations allows DMUB to disable the OTG during PSR link-off. This theoretically saves power by putting more of the display hardware to sleep. However, we observe that with PSR SU, it causes visual artifacts, higher power usage, and potential system hang. This is partly due to an odd behavior with the VStartup interrupt used to signal DRM vblank events. If the OTG is toggled on/off during a PSR link on/off cycle, the vstartup interrupt fires twice in quick succession. This generates incorrectly timed vblank events. Additionally, it can cause cursor updates to generate visual artifacts. Note that this is not observed with PSR1 since PSR is fully disabled when there are vblank event requestors. Cursor updates are also artifact-free, likely because there are no selectively-updated (SU) frames that can generate artifacts. [How] A potential solution is to disable z10 idle optimizations only when fast updates (flips & cursor updates) are committed. A mechanism to do so would require some thoughtful design. Let's just disable idle optimizations for PSR2 for now. Fixes: 7cc191ee7621 ("drm/amd/display: Implement MPO PSR SU") Reported-by: August Wikerfors <git@augustwikerfors.se> Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/ Tested-by: August Wikerfors <git@augustwikerfors.se> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/panel: simple: Add Multi-Inno Technology MI0800FT-9Christoph Niedermaier
Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel support. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220812114832.4946-1-cniedermaier@dh-electronics.com
2022-09-29drm/amdgpu: correct the memcpy size for ip discovery firmwareLe Ma
Use fw->size instead of discovery_tmr_size for fallback path. Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Skip put_reset_domain if it doesn't existVignesh Chander
For xgmi sriov, the reset is handled by host driver and hive->reset_domain is not initialized so need to check if it exists before doing a put. Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: remove switch from amdgpu_gmc_noretry_setGraham Sider
Simplify the logic in amdgpu_gmc_noretry_set by getting rid of the switch. Also set noretry=1 as default for GFX 10.3.0 and greater since retry faults are not supported. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Fix mc_umc_status used uninitialized warningLeo Li
On ChromeOS clang build, the following warning is seen: /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:6: error: variable 'mc_umc_status' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (mca_addr == UMC_INVALID_ADDR) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:485:21: note: uninitialized use occurs here if ((REG_GET_FIELD(mc_umc_status, MCA_UMC_UMC0_MCUMC_STATUST0, Val) == 1 && ^~~~~~~~~~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu.h:1208:5: note: expanded from macro 'REG_GET_FIELD' (((value) & REG_FIELD_MASK(reg, field)) >> REG_FIELD_SHIFT(reg, field)) ^~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:2: note: remove the 'if' if its condition is always true if (mca_addr == UMC_INVALID_ADDR) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:460:24: note: initialize the variable 'mc_umc_status' to silence this warning uint64_t mc_umc_status, mc_umc_addrt0; ^ = 0 1 error generated. make[5]: *** [/mnt/host/source/src/third_party/kernel/v5.15/scripts/Makefile.build:289: drivers/gpu/drm/amd/amdgpu/umc_v6_7.o] Error 1 Fix by initializing mc_umc_status = 0. Fixes: 1014bd1cb32552 ("drm/amdgpu: support to convert dedicated umc mca address") Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Prevent OTG shutdown during PSR SULeo Li
[Why] Enabling Z10 optimizations allows DMUB to disable the OTG during PSR link-off. This theoretically saves power by putting more of the display hardware to sleep. However, we observe that with PSR SU, it causes visual artifacts, higher power usage, and potential system hang. This is partly due to an odd behavior with the VStartup interrupt used to signal DRM vblank events. If the OTG is toggled on/off during a PSR link on/off cycle, the vstartup interrupt fires twice in quick succession. This generates incorrectly timed vblank events. Additionally, it can cause cursor updates to generate visual artifacts. Note that this is not observed with PSR1 since PSR is fully disabled when there are vblank event requestors. Cursor updates are also artifact-free, likely because there are no selectively-updated (SU) frames that can generate artifacts. [How] A potential solution is to disable z10 idle optimizations only when fast updates (flips & cursor updates) are committed. A mechanism to do so would require some thoughtful design. Let's just disable idle optimizations for PSR2 for now. Fixes: 7cc191ee7621 ("drm/amd/display: Implement MPO PSR SU") Reported-by: August Wikerfors <git@augustwikerfors.se> Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/ Tested-by: August Wikerfors <git@augustwikerfors.se> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add page retirement handling for CPU RASTao Zhou
Do RAS page retirement in poison consumption handler unconditionally. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: use RAS error address convert api in mca notifierTao Zhou
Use the convert interface to simplify code. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: support to convert dedicated umc mca addressTao Zhou
Update umc error address query interface, the mca address can be read from register or input from parameter. TODO: define a common address conversion function to simplify the code. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: export umc error address convert interfaceTao Zhou
Make it global so we can convert specific mca address. v2: rename query_error_address_per_channel to convert_ras_error_address Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: fix sdma v4 init microcode errorLikun Gao
Fix init SDMA microcode error for sdma v4, which caused by mistake when rearch sdma init microcode function (coding 4.2.2 to 4.2.0). Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()Hamza Mahfooz
Address the following error: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c: In function ‘dc_stream_remove_writeback’: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:527:55: error: array subscript [0, 0] is outside array bounds of ‘struct dc_writeback_info[1]’ [-Werror=array-bounds] 527 | stream->writeback_info[j] = stream->writeback_info[i]; | ~~~~~~~~~~~~~~~~~~~~~~^~~ In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc.h:1269, from ./drivers/gpu/drm/amd/amdgpu/../display/dc/inc/core_types.h:29, from ./drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dc_common.h:29, from drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:27: ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_stream.h:241:34: note: while referencing ‘writeback_info’ 241 | struct dc_writeback_info writeback_info[MAX_DWB_PIPES]; | Currently, we aren't checking to see if j remains within writeback_info[]'s bounds. So, add a check to make sure that we aren't overflowing the buffer. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Add amdgpu suspend-resume code path under SRIOVBokun Zhang
- Under SRIOV, we need to send REQ_GPU_FINI to the hypervisor during the suspend time. Furthermore, we cannot request a mode 1 reset under SRIOV as VF. Therefore, we will skip it as it is called in suspend_noirq() function. - In the resume code path, we need to send REQ_GPU_INIT to the hypervisor and also resume PSP IP block under SRIOV. Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: fix compiler warning for amdgpu_gfx_cp_init_microcodeLikun Gao
Change the type of parameter on amdgpu_gfx_cp_init_microcode to fix compiler warning. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: fix a compiling error in old kernelsAsher Song
This patch is used to fix following compiling error that occurs in some old kernels. error: ‘for’ loop initial declarations are only allowed in C99 mode for (int i = 0; i < dc->res_pool->res_cap->num_dsc; i++) { Signed-off-by: Asher Song <Asher.Song@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add rlc_sr_cntl_list to firmware arrayHawking Zhang
To allow upload the list via psp Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Remove fence_process in count_emittedJiadong.Zhu
The function amdgpu_fence_count_emitted used in work_hander should not call amdgpu_fence_process which must be used in irq handler. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Correct the position in patch_cond_execJiadong.Zhu
The current position calulated in gfx_v9_0_ring_emit_patch_cond_exec underflows when the wptr is divisible by ring->buf_mask + 1. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-16 15:51:06 +0000