summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-07-12platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOMGeert Uytterhoeven
The Acer Aspire 1 Embedded Controller is only present on the Qualcomm Snapdragon-based Acer Aspire 1 laptop. Hence add a dependency on ARCH_QCOM, to prevent asking the user about this driver when configuring a kernel without Qualcomm SoC support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/f5f38709c01d369ed9e375ceb2a9a12986457a1a.1720707932.git.geert+renesas@glider.be Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-07-12misc: Kconfig: add a new dependency for MARVELL_CN10K_DPIVamsi Attunuru
DPI hardware is an on-chip PCIe device on Marvell's arm64 SoC platforms. As Arnd suggested, CN10K belongs to ARCH_THUNDER lineage. Patch makes mrvl_cn10k_dpi driver dependent on CONFIG_ARCH_THUNDER. Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Link: https://lore.kernel.org/r/20240711120115.4069401-1-vattunuru@marvell.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-12virtio: add missing MODULE_DESCRIPTION() macroJeff Johnson
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio_dma_buf.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240602-md-virtio_dma_buf-v1-1-ce602d47e257@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-12agp: uninorth: add missing MODULE_DESCRIPTION() macroJeff Johnson
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/uninorth-agp.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/20240615-md-powerpc-drivers-char-agp-v1-1-b79bfd07da42@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-12spmi: add missing MODULE_DESCRIPTION() macrosJeff Johnson
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/hisi-spmi-controller.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/spmi-pmic-arb.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240609-md-drivers-spmi-v1-1-f1d5b24e7a66@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-12media: raspberrypi: Switch to remove_newStephen Rothwell
The remove callback's return value is about to change from int to void, this is done by commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void"). Prepare for merging the patch by switching the PiSP driver from remove to remove_new callback. Fixes: 12187bd5d4f8 ("media: raspberrypi: Add support for PiSP BE") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-07-12efi: Replace efi_memory_attributes_table_t 0-sized array with flexible arrayKees Cook
While efi_memory_attributes_table_t::entry isn't used directly as an array, it is used as a base for pointer arithmetic. The type is wrong as it's not technically an array of efi_memory_desc_t's; they could be larger. Regardless, leave the type unchanged and remove the old style "0" array size. Additionally replace the open-coded entry offset code with the existing efi_memdesc_ptr() helper. Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-07-12efi: Rename efi_early_memdesc_ptr() to efi_memdesc_ptr()Kees Cook
The "early" part of the helper's name isn't accurate[1]. Drop it in preparation for adding a new (not early) usage. Suggested-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/lkml/CAMj1kXEyDjH0uu3Z4eBesV3PEnKGi5ArXXMp7R-hn8HdRytiPg@mail.gmail.com [1] Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-07-12leds: leds-lp5569: Enable chip after chip configurationChristian Marangi
Documentation say that clock internal config needs to be set BEFORE chip is enabled. Align code to this and move the CHIP enable after the CHIP is configured. While at it also make use of STATUS reg and check when STARTUP is completed instead of sleep for 1-2 ms. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20240712004556.15601-3-ansuelsmth@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-07-12leds: leds-lp5569: Better handle enabling clock internal settingChristian Marangi
Better handle enabling clock internal setting. In further testing it was notice that internal clock config MUST be set before clock output config or the LED CHIP might stop working. This wasn't documented and was actually found on devices that have 2 chip chained where one chip provide clock for the other. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20240712004556.15601-2-ansuelsmth@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-07-12leds: leds-lp5569: Fix typo in driver nameChristian Marangi
Remove extra x from driver name as this was a typo from copy-paste error. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20240712004556.15601-1-ansuelsmth@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-07-12i2c: testunit: avoid re-issued work after read messageWolfram Sang
The to-be-fixed commit rightfully prevented that the registers will be cleared. However, the index must be cleared. Otherwise a read message will re-issue the last work. Fix it and add a comment describing the situation. Fixes: c422b6a63024 ("i2c: testunit: don't erase registers after STOP") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2024-07-12firewire: core: move copy_port_status() helper function to TP_fast_assign() ↵Takashi Sakamoto
block It would be possible to put any statement in TP_fast_assign(). This commit obsoletes the helper function and put its statements to TP_fast_assign() for the code simplicity. Link: https://lore.kernel.org/r/20240712003010.87341-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
2024-07-12Merge tag 'amd-drm-fixes-6.10-2024-07-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.10-2024-07-11: amdgpu: - PSR-SU fix - Reseved VMID fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240712005534.803064-1-alexander.deucher@amd.com
2024-07-12Merge tag 'drm-xe-fixes-2024-07-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes UAPI Changes: - Use write-back caching mode for system memory on DGFX (Thomas) Driver Changes: - Do not leak object when finalizing hdcp gsc (Nirmoy) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/vgqz35btnxdddko3byrgww5ii36wig2tvondg2p3j3b3ourj4i@rqgolll3wwkh
2024-07-12drm/omap: Restrict compile testing to PAGE_SIZE less than 64KBNathan Chancellor
Prior to commit dc6fcaaba5a5 ("drm/omap: Allow build with COMPILE_TEST=y"), it was only possible to build the omapdrm driver with a 4KB page size. After that change, when the PAGE_SIZE is 64KB or larger, clang points out that the driver has some assumptions around the page size implicitly by passing PAGE_SIZE to a parameter with a type of u16: drivers/gpu/drm/omapdrm/omap_gem.c:758:7: error: implicit conversion from 'unsigned long' to 'u16' (aka 'unsigned short') changes value from 65536 to 0 [-Werror,-Wconstant-conversion] 757 | block = tiler_reserve_2d(fmt, omap_obj->width, omap_obj->height, | ~~~~~~~~~~~~~~~~ 758 | PAGE_SIZE); | ^~~~~~~~~ arch/powerpc/include/asm/page.h:25:34: note: expanded from macro 'PAGE_SIZE' 25 | #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) | ~~~~~~~~~~~~~^~~~~~~~~~~~~ drivers/gpu/drm/omapdrm/omap_gem.c:1504:44: error: implicit conversion from 'unsigned long' to 'u16' (aka 'unsigned short') changes value from 65536 to 0 [-Werror,-Wconstant-conversion] 1504 | block = tiler_reserve_2d(fmts[i], w, h, PAGE_SIZE); | ~~~~~~~~~~~~~~~~ ^~~~~~~~~ arch/powerpc/include/asm/page.h:25:34: note: expanded from macro 'PAGE_SIZE' 25 | #define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) | ~~~~~~~~~~~~~^~~~~~~~~~~~~ 2 errors generated. As there is a lot of use of a u16 type throughout this driver and it will only ever be run on hardware that has a 4KB page size, just restrict compile testing to when the page size is less than 64KB (as no other issues have been discussed and it keeps compile testing relatively more available). Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240620-omapdrm-restrict-compile-test-to-sub-64kb-page-size-v1-1-5e56de71ffca@kernel.org
2024-07-12Merge tag 'drm-xe-next-fixes-2024-07-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - Rename xe perf layer as xe observation layer (Ashutosh) Driver Changes: - Drop trace_xe_hw_fence_free (Brost) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zo_3ustogPDVKZwu@intel.com
2024-07-12Merge tag 'drm-misc-next-fixes-2024-07-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next A fix for fbdev on big endian systems, a condition fix for a sharp panel at removal, and a fix for qxl to prevent unpinned buffer access under certain conditions. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240711-benign-rich-mouflon-2eeafe@houat
2024-07-11net: netconsole: Eliminate redundant setting of enabled fieldBreno Leitao
When disabling a netconsole target, enabled_store() is called with enabled=false. Currently, this results in updating the nt->enabled field twice: 1. Inside the if/else block, with the target_list_lock spinlock held 2. Later, without the target_list_lock This patch eliminates the redundancy by setting the field only once, improving efficiency and reducing potential race conditions. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240709144403.544099-3-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-11net: netconsole: Remove unnecessary cast from boolBreno Leitao
The 'enabled' variable is already a bool, so casting it to its value is redundant. Remove the superfluous cast, improving code clarity without changing functionality. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240709144403.544099-2-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-12md/raid1: set max_sectors during early return from choose_slow_rdev()Mateusz Jończyk
Linux 6.9+ is unable to start a degraded RAID1 array with one drive, when that drive has a write-mostly flag set. During such an attempt, the following assertion in bio_split() is hit: BUG_ON(sectors <= 0); Call Trace: ? bio_split+0x96/0xb0 ? exc_invalid_op+0x53/0x70 ? bio_split+0x96/0xb0 ? asm_exc_invalid_op+0x1b/0x20 ? bio_split+0x96/0xb0 ? raid1_read_request+0x890/0xd20 ? __call_rcu_common.constprop.0+0x97/0x260 raid1_make_request+0x81/0xce0 ? __get_random_u32_below+0x17/0x70 ? new_slab+0x2b3/0x580 md_handle_request+0x77/0x210 md_submit_bio+0x62/0xa0 __submit_bio+0x17b/0x230 submit_bio_noacct_nocheck+0x18e/0x3c0 submit_bio_noacct+0x244/0x670 After investigation, it turned out that choose_slow_rdev() does not set the value of max_sectors in some cases and because of it, raid1_read_request calls bio_split with sectors == 0. Fix it by filling in this variable. This bug was introduced in commit dfa8ecd167c1 ("md/raid1: factor out choose_slow_rdev() from read_balance()") but apparently hidden until commit 0091c5a269ec ("md/raid1: factor out helpers to choose the best rdev from read_balance()") shortly thereafter. Cc: stable@vger.kernel.org # 6.9.x+ Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Fixes: dfa8ecd167c1 ("md/raid1: factor out choose_slow_rdev() from read_balance()") Cc: Song Liu <song@kernel.org> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Paul Luse <paul.e.luse@linux.intel.com> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Link: https://lore.kernel.org/linux-raid/20240706143038.7253-1-mat.jonczyk@o2.pl/ -- Tested on both Linux 6.10 and 6.9.8. Inside a VM, mdadm testsuite for RAID1 on 6.10 did not find any problems: ./test --dev=loop --no-error --raidtype=raid1 (on 6.9.8 there was one failure, caused by external bitmap support not compiled in). Notes: - I was reliably getting deadlocks when adding / removing devices on such an array - while the array was loaded with fsstress with 20 concurrent processes. When the array was idle or loaded with fsstress with 8 processes, no such deadlocks happened in my tests. This occurred also on unpatched Linux 6.8.0 though, but not on 6.1.97-rc1, so this is likely an independent regression (to be investigated). - I was also getting deadlocks when adding / removing the bitmap on the array in similar conditions - this happened on Linux 6.1.97-rc1 also though. fsstress with 8 concurrent processes did cause it only once during many tests. - in my testing, there was once a problem with hot adding an internal bitmap to the array: mdadm: Cannot add bitmap while array is resyncing or reshaping etc. mdadm: failed to set internal bitmap. even though no such reshaping was happening according to /proc/mdstat. This seems unrelated, though. Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240711202316.10775-1-mat.jonczyk@o2.pl
2024-07-12md-cluster: fix no recovery job when adding/re-adding a diskHeming Zhao
The commit db5e653d7c9f ("md: delay choosing sync action to md_start_sync()") delays the start of the sync action. In a clustered environment, this will cause another node to first activate the spare disk and skip recovery. As a result, no nodes will perform recovery when a disk is added or re-added. Before db5e653d7c9f: ``` node1 node2 ---------------------------------------------------------------- md_check_recovery + md_update_sb | sendmsg: METADATA_UPDATED + md_choose_sync_action process_metadata_update | remove_and_add_spares //node1 has not finished adding + call mddev->sync_work //the spare disk:do nothing md_start_sync starts md_do_sync md_do_sync + grabbed resync_lockres:DLM_LOCK_EX + do syncing job md_check_recovery sendmsg: METADATA_UPDATED process_metadata_update //activate spare disk ... ... md_do_sync waiting to grab resync_lockres:EX ``` After db5e653d7c9f: (note: if 'cmd:idle' sets MD_RECOVERY_INTR after md_check_recovery starts md_start_sync, setting the INTR action will exacerbate the delay in node1 calling the md_do_sync function.) ``` node1 node2 ---------------------------------------------------------------- md_check_recovery + md_update_sb | sendmsg: METADATA_UPDATED + calls mddev->sync_work process_metadata_update //node1 has not finished adding //the spare disk:do nothing md_start_sync + md_choose_sync_action | remove_and_add_spares + calls md_do_sync md_check_recovery md_update_sb sendmsg: METADATA_UPDATED process_metadata_update //activate spare disk ... ... ... ... md_do_sync + grabbed resync_lockres:EX + raid1_sync_request skip sync under conf->fullsync:0 md_do_sync 1. waiting to grab resync_lockres:EX 2. when node1 could grab EX lock, node1 will skip resync under recovery_offset:MaxSector ``` How to trigger: ```(commands @node1) # to easily watch the recovery status echo 2000 > /proc/sys/dev/raid/speed_limit_max ssh root@node2 "echo 2000 > /proc/sys/dev/raid/speed_limit_max" mdadm -CR /dev/md0 -l1 -b clustered -n 2 /dev/sda /dev/sdb --assume-clean ssh root@node2 mdadm -A /dev/md0 /dev/sda /dev/sdb mdadm --manage /dev/md0 --fail /dev/sda --remove /dev/sda mdadm --manage /dev/md0 --add /dev/sdc === "cat /proc/mdstat" on both node, there are no recovery action. === ``` How to fix: because md layer code logic is hard to restore for speeding up sync job on local node, we add new cluster msg to pending the another node to active disk. Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Su Yue <glass.su@suse.com> Acked-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240709104120.22243-2-heming.zhao@suse.com
2024-07-12md-cluster: fix hanging issue while a new disk addingHeming Zhao
The commit 1bbe254e4336 ("md-cluster: check for timeout while a new disk adding") is correct in terms of code syntax but not suite real clustered code logic. When a timeout occurs while adding a new disk, if recv_daemon() bypasses the unlock for ack_lockres:CR, another node will be waiting to grab EX lock. This will cause the cluster to hang indefinitely. How to fix: 1. In dlm_lock_sync(), change the wait behaviour from forever to a timeout, This could avoid the hanging issue when another node fails to handle cluster msg. Another result of this change is that if another node receives an unknown msg (e.g. a new msg_type), the old code will hang, whereas the new code will timeout and fail. This could help cluster_md handle new msg_type from different nodes with different kernel/module versions (e.g. The user only updates one leg's kernel and monitors the stability of the new kernel). 2. The old code for __sendmsg() always returns 0 (success) under the design (must successfully unlock ->message_lockres). This commit makes this function return an error number when an error occurs. Fixes: 1bbe254e4336 ("md-cluster: check for timeout while a new disk adding") Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Su Yue <glass.su@suse.com> Acked-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240709104120.22243-1-heming.zhao@suse.com
2024-07-12bna: adjust 'name' buf size of bna_tcb and bna_ccb structuresAlexey Kodanev
To have enough space to write all possible sprintf() args. Currently 'name' size is 16, but the first '%s' specifier may already need at least 16 characters, since 'bnad->netdev->name' is used there. For '%d' specifiers, assume that they require: * 1 char for 'tx_id + tx_info->tcb[i]->id' sum, BNAD_MAX_TXQ_PER_TX is 8 * 2 chars for 'rx_id + rx_info->rx_ctrl[i].ccb->id', BNAD_MAX_RXP_PER_RX is 16 And replace sprintf with snprintf. Detected using the static analysis tool - Svace. Fixes: 8b230ed8ec96 ("bna: Brocade 10Gb Ethernet device driver") Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-11Revert "drm/amd/display: Reset freesync config before update new state"Leo Li
This change caused PSR SU panels to not read from their remote fb, preventing us from entering self-refresh. It is a regression. This reverts commit 6b8487cdf9fc7bae707519ac5b5daeca18d1e85b. Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-11i40e: fix: remove needless retries of NVM updateAleksandr Loktionov
Remove wrong EIO to EGAIN conversion and pass all errors as is. After commit 230f3d53a547 ("i40e: remove i40e_status"), which should only replace F/W specific error codes with Linux kernel generic, all EIO errors suddenly started to be converted into EAGAIN which leads nvmupdate to retry until it timeouts and sometimes fails after more than 20 minutes in the middle of NVM update, so NVM becomes corrupted. The bug affects users only at the time when they try to update NVM, and only F/W versions that generate errors while nvmupdate. For example, X710DA2 with 0x8000ECB7 F/W is affected, but there are probably more... Command for reproduction is just NVM update: ./nvmupdate64 In the log instead of: i40e_nvmupd_exec_aq err I40E_ERR_ADMIN_QUEUE_ERROR aq_err I40E_AQ_RC_ENOMEM) appears: i40e_nvmupd_exec_aq err -EIO aq_err I40E_AQ_RC_ENOMEM i40e: eeprom check failed (-5), Tx/Rx traffic disabled The problematic code did silently convert EIO into EAGAIN which forced nvmupdate to ignore EAGAIN error and retry the same operation until timeout. That's why NVM update takes 20+ minutes to finish with the fail in the end. Fixes: 230f3d53a547 ("i40e: remove i40e_status") Co-developed-by: Kelvin Kang <kelvin.kang@intel.com> Signed-off-by: Kelvin Kang <kelvin.kang@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240710224455.188502-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-11Merge tag 'wireless-next-2024-07-11' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 Most likely the last "new features" pull request for v6.11 with changes both in stack and in drivers. The big thing is the multiple radios for wiphy feature which makes it possible to better advertise radio capabilities to user space. mt76 enabled MLO and iwlwifi re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support. Major changes: cfg80211/mac80211 * remove DEAUTH_NEED_MGD_TX_PREP flag * multiple radios per wiphy support mac80211_hwsim * multi-radio wiphy support ath12k * DebugFS support for datapath statistics * WCN7850: support for WoW (Wake on WLAN) * WCN7850: device-tree bindings ath11k * QCA6390: device-tree bindings iwlwifi * mvm: re-enable Multi-Link Operation (MLO) * aggregation (A-MSDU) optimisations rtw89 * preparation for RTL8852BE-VT support * WoWLAN support for WiFi 6 chips * 36-bit PCI DMA support mt76 * mt7925 Multi-Link Operation (MLO) support * tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (204 commits) wifi: mac80211: fix AP chandef capturing in CSA wifi: iwlwifi: correctly reference TSO page information wifi: mt76: mt792x: fix scheduler interference in drv own process wifi: mt76: mt7925: enabling MLO when the firmware supports it wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_info wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLO wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLO wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLO wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLO wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctx wifi: mt76: add def_wcid to struct mt76_wcid wifi: mt76: mt7925: report link information in rx status wifi: mt76: mt7925: update rate index according to link id wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change ... ==================== Link: https://patch.msgid.link/20240711102353.0C849C116B1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-11Merge branch 'for-6.11/xor_fixes' into cxl-for-nextDave Jiang
Series to fix XOR math for DPA to SPA translation - Refactor and fold cxl_trace_hpa() into cxl_dpa_to_hpa() - Complete DPA->HPA->SPA translation and correct XOR translation issue - Add new method to verify a CXL target position - Remove old method of CXL target position verifiation
2024-07-12i2c: rcar: ensure Gen3+ reset does not disturb local targetsWolfram Sang
R-Car Gen3+ needs a reset before every controller transfer. That erases configuration of a potentially in parallel running local target instance. To avoid this disruption, avoid controller transfers if a local target is running. Also, disable SMBusHostNotify because it requires being a controller and local target at the same time. Fixes: 3b770017b03a ("i2c: rcar: handle RXDMA HW behaviour on Gen3") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-11cxl: Remove defunct code calculating host bridge target positionsAlison Schofield
The CXL Spec 3.1 Table 9-22 requires that the BIOS populate the CFMWS target list in interleave target order. This means the calculations the CXL driver added to determine positions when XOR math is in use, along with the entire XOR vs Modulo call back setup is not needed. A prior patch added a common method to verify positions. Remove the now unused code related to the cxl_calc_hb_fn. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/2e2c32a2d0f1007e920b58712d15edad2e48d857.1719980933.git.alison.schofield@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2024-07-11cxl/region: Verify target positions using the ordered target listAlison Schofield
When a root decoder is configured the interleave target list is read from the BIOS populated CFMWS structure. Per the CXL spec 3.1 Table 9-22 the target list is in interleave order. The CXL driver populates its decoder target list in the same order and stores it in 'struct cxl_switch_decoder' field "@target: active ordered target list in current decoder configuration" Given the promise of an ordered list, the driver can stop duplicating the work of BIOS and simply check target positions against the ordered list during region configuration. The simplified check against the ordered list is presented here. A follow-on patch will remove the unused code. For Modulo arithmetic this is not a fix, only a simplification. For XOR arithmetic this is a fix for HB IW of 3,6,12. Fixes: f9db85bfec0d ("cxl/acpi: Support CXL XOR Interleave Math (CXIMS)") Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/35d08d3aba08fee0f9b86ab1cef0c25116ca8a55.1719980933.git.alison.schofield@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2024-07-11cxl: Restore XOR'd position bits during address translationAlison Schofield
When a device reports a DPA in events like poison, general_media, and dram, the driver translates that DPA back to an HPA. Presently, the CXL driver translation only considers the Modulo position and will report the wrong HPA for XOR configured root decoders. Add a helper function that restores the XOR'd bits during DPA->HPA address translation. Plumb a root decoder callback to the new helper when XOR interleave arithmetic is in use. For Modulo arithmetic, just let the callback be NULL - as in no extra work required. Upon completion of a DPA->HPA translation a couple of checks are performed on the result. One simply confirms that the calculated HPA is within the address range of the region. That test is useful for both Modulo and XOR interleave arithmetic decodes. A second check confirms that the HPA is within an expected chunk based on the endpoints position in the region and the region granularity. An XOR decode disrupts the Modulo pattern making the chunk check useless. To align the checks with the proper decode, pull the region range check inline and use the helper to do the chunk check for Modulo decodes only. A cxl-test unit test is posted for upstream review here: https://lore.kernel.org/20240624210644.495563-1-alison.schofield@intel.com/ Fixes: 28a3ae4ff66c ("cxl/trace: Add an HPA to cxl_poison trace events") Signed-off-by: Alison Schofield <alison.schofield@intel.com> Tested-by: Diego Garcia Rodriguez <diego.garcia.rodriguez@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://patch.msgid.link/1a1ac880d9f889bd6384e657e810431b9a0a72e5.1719980933.git.alison.schofield@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2024-07-11cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()Alison Schofield
Although cxl_trace_hpa() is used to populate TRACE EVENTs with HPA addresses the work it performs is a DPA to HPA translation not a trace. Tidy up this naming by moving the minimal work done in cxl_trace_hpa() into cxl_dpa_to_hpa() and use cxl_dpa_to_hpa() for trace event callbacks. Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Robert Richter <rrichter@amd.com> Link: https://patch.msgid.link/452a9b0c525b774c72d9d5851515ffa928750132.1719980933.git.alison.schofield@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2024-07-11Merge tag 'for-6.10/dm-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mikulas Patocka: - Fix broken discard for device mapper VDO target * tag 'for-6.10/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm vdo: replace max_discard_sectors with max_hw_discard_sectors
2024-07-11drm/vboxvideo: fix mapping leaksPhilipp Stanner
When the PCI devres API was introduced to this driver, it was wrongly assumed that initializing the device with pcim_enable_device() instead of pci_enable_device() will make all PCI functions managed. This is wrong and was caused by the quite confusing PCI devres API in which some, but not all, functions become managed that way. The function pci_iomap_range() is never managed. Replace pci_iomap_range() with the managed function pcim_iomap_range(). Fixes: 8558de401b5f ("drm/vboxvideo: use managed pci functions") Link: https://lore.kernel.org/r/20240613115032.29098-14-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2024-07-11PCI: Add managed pcim_iomap_range()Philipp Stanner
The only managed mapping function currently is pcim_iomap() which doesn't allow for mapping an area starting at a certain offset, which many drivers want. Add pcim_iomap_range() as an exported function. Link: https://lore.kernel.org/r/20240613115032.29098-13-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-07-11PCI: Remove legacy pcim_release()Philipp Stanner
Thanks to preceding cleanup steps, pcim_release() is now not needed anymore and can be replaced by pcim_disable_device(), which is the exact counterpart to pcim_enable_device(). This permits removing further parts of the old PCI devres implementation. Replace pcim_release() with pcim_disable_device(). Remove the now unused function get_pci_dr(). Remove the struct pci_devres from pci.h. Link: https://lore.kernel.org/r/20240613115032.29098-12-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-07-11PCI: Add managed pcim_intx()Philipp Stanner
pci_intx() is a "hybrid" function, i.e., it is managed if pcim_enable_device() has been called, but unmanaged otherwise. Add pcim_intx(), which is always managed, and implement pci_intx() using it. Remove the now-unused struct pci_devres.orig_intx and .restore_intx and find_pci_dr(). Link: https://lore.kernel.org/r/20240613115032.29098-11-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> [kwilczynski: squashed in https://lore.kernel.org/r/426645d40776198e0fcc942f4a6cac4433c7a9aa.camel@redhat.com to fix problem reported and tested by Ashish Kalra <Ashish.Kalra@amd.com>: https://lore.kernel.org/r/20240708214656.4721-1-Ashish.Kalra@amd.com https://lore.kernel.org/r/8c4634e9-4f02-4c54-9c89-d75e2f4bf026@amd.com/] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-07-11net/mlx5: Expose SFs IRQsShay Drory
Expose the sysfs files for the IRQs that the mlx5 PCI SFs are using. These entries are similar to PCI PFs and VFs in 'msi_irqs' directory. Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> --- v8-v9: - add Przemek RB v6->v7: - remove not needed changes to mlx5 sfnum SF sysfs v5->v6: - fail IRQ creation in case auxiliary_device_sysfs_irq_add() failed (Parav and Przemek) v2->v3: - fix mlx5 sfnum SF sysfs
2024-07-11driver core: auxiliary bus: show auxiliary device IRQsShay Drory
PCI subfunctions (SF) are anchored on the auxiliary bus. PCI physical and virtual functions are anchored on the PCI bus. The irq information of each such function is visible to users via sysfs directory "msi_irqs" containing files for each irq entry. However, for PCI SFs such information is unavailable. Due to this users have no visibility on IRQs used by the SFs. Secondly, an SF can be multi function device supporting rdma, netdevice and more. Without irq information at the bus level, the user is unable to view or use the affinity of the SF IRQs. Hence to match to the equivalent PCI PFs and VFs, add "irqs" directory, for supporting auxiliary devices, containing file for each irq entry. For example: $ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/ 50 51 52 53 54 55 56 57 58 Cc: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> --- v9-v10: - remove Przemek RB - add name field to auxiliary_irq_info (Greg and Przemek) - handle bogus IRQ in auxiliary_device_sysfs_irq_remove (Greg) v8-v9: - add Przemek RB - use guard() in auxiliary_irq_dir_prepare (Paolo) v7-v8: - use cleanup.h for info and name fields (Greg) - correct error flow in auxiliary_irq_dir_prepare (Przemek) - add documentation for new fields of auxiliary_device (Simon) v6-v7: - dynamically creating irqs directory when first irq file created (Greg) - removed irqs flag and simplified the dev_add() API (Greg) - move sysfs related new code to a new auxiliary_sysfs.c file (Greg) v5-v6: - removed concept of shared and exclusive and hence global xarray (Greg) v4-v5: - restore global mutex and replace refcount_t with simple integer (Greg) v3->4: - remove global mutex (Przemek) v2->v3: - fix function declaration in case SYSFS isn't defined v1->v2: - move #ifdefs from drivers/base/auxiliary.c to include/linux/auxiliary_bus.h (Greg) - use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL (Greg) - Fix kzalloc(ref) to kzalloc(*ref) (Simon) - Add return description in auxiliary_device_sysfs_irq_add() kdoc (Simon) - Fix auxiliary_irq_mode_show doc (kernel test boot)
2024-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/act_ct.c 26488172b029 ("net/sched: Fix UAF when resolving a clash") 3abbd7ed8b76 ("act_ct: prepare for stolen verdict coming from conntrack and nat engine") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-11dm vdo: replace max_discard_sectors with max_hw_discard_sectorsBruce Johnston
Commit 4f563a64732d ("block: add a max_user_discard_sectors queue limit") changed block core to set max_discard_sectors to: min(lim->max_hw_discard_sectors, lim->max_user_discard_sectors) Commit 825d8bbd2f32 ("dm: always manage discard support in terms of max_hw_discard_sectors") fixed most dm targetss to deal with this, by replacing max_discard_sectors with max_hw_discard_sectors. Unfortunately, dm-vdo did not get fixed at that time. Fixes: 825d8bbd2f32 ("dm: always manage discard support in terms of max_hw_discard_sectors") Signed-off-by: Bruce Johnston <bjohnsto@redhat.com> Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-07-11Merge tag 'spi-fix-v6.10-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "This fixes two regressions that have been bubbling along for a large part of this release. One is a revert of the multi mode support for the OMAP SPI controller, this introduced regressions on a number of systems and while there has been progress on fixing those we've not got something that works for everyone yet so let's just drop the change for now. The other is a series of fixes from David Lechner for his recent message optimisation work, this interacted badly with spi-mux which is altogether too clever with recursive use of the bus and creates situations that hadn't been considered. There are also a couple of small driver specific fixes, including one more patch from David for sleep duration calculations in the AXI driver" * tag 'spi-fix-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: mux: set ctlr->bits_per_word_mask spi: add defer_optimize_message controller flag spi: don't unoptimize message in spi_async() spi: omap2-mcspi: Revert multi mode support spi: davinci: Unset POWERDOWN bit when releasing resources spi: axi-spi-engine: fix sleep calculation spi: imx: Don't expect DMA for i.MX{25,35,50,51,53} cspi devices
2024-07-11Merge branch 'for-next/vcpu-hotplug' into for-next/coreCatalin Marinas
* for-next/vcpu-hotplug: (21 commits) : arm64 support for virtual CPU hotplug (ACPI) irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU cpumask: Add enabled cpumask for present CPUs that can be brought online arm64: document virtual CPU hotplug's expectations arm64: Kconfig: Enable hotplug CPU on arm64 if ACPI_PROCESSOR is enabled. arm64: arch_register_cpu() variant to check if an ACPI handle is now available. arm64: psci: Ignore DENIED CPUs irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc() arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry arm64: acpi: Move get_cpu_for_acpi_id() to a header ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug ACPI: scan: switch to flags for acpi_scan_check_and_detach() ACPI: processor: Register deferred CPUs from acpi_processor_get_info() ACPI: processor: Add acpi_get_processor_handle() helper ACPI: processor: Move checks and availability of acpi_processor earlier ACPI: processor: Fix memory leaks in error paths of processor_add() ACPI: processor: Return an error if acpi_processor_get_info() fails in processor_add() ACPI: processor: Drop duplicated check on _STA (enabled + present) cpu: Do not warn on arch_register_cpu() returning -EPROBE_DEFER ...
2024-07-11Merge branches 'for-next/cpufeature', 'for-next/misc', 'for-next/kselftest', ↵Catalin Marinas
'for-next/mte', 'for-next/errata', 'for-next/acpi', 'for-next/gic-v3-pmr' and 'for-next/doc', remote-tracking branch 'arm64/for-next/perf' into for-next/core * arm64/for-next/perf: perf: add missing MODULE_DESCRIPTION() macros perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h perf: arm_v6/7_pmu: Drop non-DT probe support perf/arm: Move 32-bit PMU drivers to drivers/perf/ perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold perf: imx_perf: add support for i.MX95 platform perf: imx_perf: fix counter start and config sequence perf: imx_perf: refactor driver for imx93 perf: imx_perf: let the driver manage the counter usage rather the user perf: imx_perf: add macro definitions for parsing config attr dt-bindings: perf: fsl-imx-ddr: Add i.MX95 compatible perf: pmuv3: Add new Cortex and Neoverse PMUs dt-bindings: arm: pmu: Add new Cortex and Neoverse cores perf/arm-cmn: Enable support for tertiary match group perf/arm-cmn: Decouple wp_config registers from filter group number * for-next/cpufeature: : Various cpufeature infrastructure patches arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1 KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1 arm64/cpufeatures/kvm: Add ARMv8.9 FEAT_ECBHB bits in ID_AA64MMFR1 register * for-next/misc: : Miscellaneous patches arm64: smp: Fix missing IPI statistics arm64: Cleanup __cpu_set_tcr_t0sz() arm64/mm: Stop using ESR_ELx_FSC_TYPE during fault arm64: Kconfig: fix typo in __builtin_return_adddress ARM64: reloc_test: add missing MODULE_DESCRIPTION() macro arm64: implement raw_smp_processor_id() using thread_info arm64/arch_timer: include <linux/percpu.h> * for-next/kselftest: : arm64 kselftest updates selftests: arm64: tags: remove the result script selftests: arm64: tags_test: conform test to TAP output kselftest/arm64: Fix a couple of spelling mistakes kselftest/arm64: Fix redundancy of a testcase kselftest/arm64: Include kernel mode NEON in fp-stress * for-next/mte: : MTE updates arm64: mte: Make mte_check_tfsr_*() conditional on KASAN instead of MTE * for-next/errata: : Arm CPU errata workarounds arm64: errata: Expand speculative SSBS workaround arm64: errata: Unify speculative SSBS errata logic arm64: cputype: Add Cortex-X925 definitions arm64: cputype: Add Cortex-A720 definitions arm64: cputype: Add Cortex-X3 definitions * for-next/acpi: : arm64 ACPI patches ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64 ACPI / amba: Drop unnecessary check for registered amba_dummy_clk arm64: FFH: Move ACPI specific code into drivers/acpi/arm64/ arm64: cpuidle: Move ACPI specific code into drivers/acpi/arm64/ ACPI: arm64: Sort entries alphabetically * for-next/gic-v3-pmr: : arm64: irqchip/gic-v3: Use compiletime constant PMR values arm64: irqchip/gic-v3: Select priorities at boot time irqchip/gic-v3: Detect GICD_CTRL.DS and SCR_EL3.FIQ earlier irqchip/gic-v3: Make distributor priorities variables irqchip/gic-common: Remove sync_access callback wordpart.h: Add REPEAT_BYTE_U32() * for-next/doc: : arm64 documentation updates Documentation: arm64: Update memory.rst for TBI
2024-07-11igc: Remove the internal 'eee_advert' fieldSasha Neftin
Since the kernel's 'ethtool_keee' structure is in use, the internal 'eee_advert' field becomes pointless and can be removed. This patch comes to clean up this redundant code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-11ice: remove eswitch rebuildMichal Swiatkowski
Since the port representors are added one by one there is no need to do eswitch rebuild. Each port representor is detached and attached in VF reset path. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-11ice: Add support for devlink local_forwarding paramPawel Kaminski
Add support for driver-specific devlink local_forwarding param. Supported values are "enabled", "disabled" and "prioritized". Default configuration is set to "enabled". Add documentation in networking/devlink/ice.rst. In previous generations of Intel NICs the transmit scheduler was only limited by PCIe bandwidth when scheduling/assigning hairpin-bandwidth between VFs. Changes to E810 HW design introduced scheduler limitation, so that available hairpin-bandwidth is bound to external port speed. In order to address this limitation and enable NFV services such as "service chaining" a knob to adjust the scheduler config was created. Driver can send a configuration message to the FW over admin queue and internal FW logic will reconfigure HW to prioritize and add more BW to VF to VF traffic. An end result, for example, 10G port will no longer limit hairpin-bandwidth to 10G and much higher speeds can be achieved. Devlink local_forwarding param set to "prioritized" enables higher hairpin-bandwitdh on related PFs. Configuration is applicable only to 8x10G and 4x25G cards. Changing local_forwarding configuration will trigger CORER reset in order to take effect. Example command to change current value: devlink dev param set pci/0000:b2:00.3 name local_forwarding \ value prioritized \ cmode runtime Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-11i40e: correct i40e_addr_to_hkey() name in kdocSimon Horman
Correct name of i40e_addr_to_hkey() in it's kdoc. kernel-doc -none reports: drivers/net/ethernet/intel/i40e/i40e.h:739: warning: expecting prototype for i40e_mac_to_hkey(). Prototype was for i40e_addr_to_hkey() instead Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-11net: intel: Remove MODULE_AUTHORsTony Nguyen
We are moving away from the Sourceforge email address. Rather than removing or updating the email for the affected entries, remove the MODULE_AUTHOR altogether as its usage is incorrect [1]. Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> # libeth, libie Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-09-16 18:19:30 +0000