summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-10-07watchdog: twl4030_wdt: add missing mod_devicetable.h includeDmitry Torokhov
The driver is using of_device_id and therefore needs to include mod_devicetable.h header. We used to get this definition indirectly via inclusion of matrix_keypad.h from twl.h, but we are cleaning up matrix_keypad.h from unnecessary includes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220927154611.3330871-1-dmitry.torokhov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: sp5100_tco: Add "action" module parameterVladimir Panteleev
Allow configuring the "action" bit, as documented in [1]. Previously, the only action supported by this module was to reset the system (0). It can now be configured to power off (1) instead. [1]: https://www.amd.com/system/files/TechDocs/44413.pdf Signed-off-by: Vladimir Panteleev <git@vladimir.panteleev.md> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220920092721.7686-1-git@vladimir.panteleev.md Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx93: add watchdog timer on imx93Alice Guo
The WDOG clocks are sourced from lpo_clk, and lpo_clk is the fixed 32KHz. TOVAL contains the 16-bit value used to set the timeout period of the watchdog. When the timeout period exceeds 2 seconds, the value written to the TOVAL register is larger than 16-bit can represent. Enabling watchdog prescaler can solve this problem. Two points need to be aware of: 1. watchdog prescaler enables a fixed 256 pre-scaling of watchdog counter reference clock 2. reconfiguration takes about 55ms on imx93 Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-8-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp_wdt: init wdog when it was activeJason Liu
Paired with suspend, we can only init wdog again when it was active and ping it once to avoid the watchdog timeout after it resumed. Signed-off-by: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Tested-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-7-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp_wdt: Handle wdog reconfigure failureYe Li
Current driver may meet reconfigure failure caused by below reasons: 1. The wdog on iMX7ULP has different behavior after RCS valid. It needs to wait more than 2.5 wdog clock for clock sync before next reconfiguration, while imx8ulp wdog does not need such delay. 2. After unlock, there is 128 bus clock window opened for reconfiguration, but on iMX8ULP, the HW can't guarantee the latency. So it is possible the window is closed before the writing arrives to wdog. 3. If the PRES is enabled, the RCS valid time becomes x256 to the time of PRES disabled. It is about 1715ms on iMX8ULP. So We have to increase the RCS timeout and can't wait it in IRQ disabled. The patch updates the driver to handle failures 1. Using different wait for unlock and RCS. Unlock valid time is very short and only related to bus clock. It must be in IRQ disabled to avoid being interrupted in 128 clock window. But for RCS time, it is longer and ok for IRQ enabled. 2. Add retry for any reconfigure failure with default 5 times. 3. Add "fsl,imx8ulp-wdt" compatile string for iMX8ULP and afterwards platform which don't need more 2.5 wdog clock after RCS valid. For imx7ulp, add post delay of 2.5 clock after RCS valid. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-6-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp_wdt: Fix RCS timeout issueYe Li
According to measure on i.MX7ULP and i.MX8ULP, the RCS done needs about 3400us and 6700us respectively. So current 20us timeout is not enough. When reconfiguring is on-going, unlock and configure CS will lead to unknown result. Increase the wait timeout value to 10ms and check the return value of RCS wait to fix the issue Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Acked-by: Jason Liu <jason.hui.liu@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-5-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp_wdt: Check CMD32EN in wdog initYe Li
When bootloader has enabled the CMD32EN bit, switch to use 32bits unlock command to unlock the CS register. Using 32bits command will help on avoiding 16 bus cycle window violation for two 16 bits commands. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Acked-by: Jason Liu <jason.hui.liu@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-4-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp: Add explict memory barrier for unlock sequenceJacky Bai
When reconfiguring the WDOG Timer of i.MX7ULP, there is a certain probability causes it to reset. The reason is that the CMD32EN of the WDOG Timer of i.MX7ULP is disabled in bootloader. The unlock sequence are two 16-bit writes to the CNT register within 16 bus clocks. Adding mb() is to guarantee that two 16-bit writes are finished within 16 bus clocks. Memory barriers cannot be added between these two 16-bit writes so that writel_relaxed is used. Suggested-by: Ye Li <ye.li@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-3-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp: Move suspend/resume to noirq phaseAnson Huang
The i.MX7ULP's watchdog is enabled by default when out of reset, so the resume callback which is to disable watchdog should be called earlier to avoid unexpected timeout, move suspend/resume callback to noirq phase. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Tested-by: Peter Chen <peter.chen@nxp.com> Tested-by: Li Jun <jun.li@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-2-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: rti-wdt:using the pm_runtime_resume_and_get to simplify the codeye xingchen
Using pm_runtime_resume_and_get() to instade of pm_runtime_get_sync and pm_runtime_put_noidle. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220802074643.1648660-1-ye.xingchen@zte.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: s3c2410_wdt: support exynosautov9 watchdogChanho Park
Like exynos850, exynosautov9 SoC also has two cpu watchdogs. Unfortunately, some configurations are slightly different so we need to add samsung,exynosautov9-wdt and separate drv data for those watchdogs. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220520121750.71473-3-chanho61.park@samsung.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: npcm: Enable clock if providedJonathan Neuschäfer
On the Nuvoton WPCM450 SoC, with its upcoming clock driver, peripheral clocks are individually gated and ungated. Therefore, the watchdog driver must be able to ungate the watchdog clock. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220610072141.347795-3-j.neuschaefer@gmx.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: meson: keep running if already activePhilippe Boos
If the watchdog is already running (e.g.: started by bootloader) then the kernel driver should keep the watchdog active but the amlogic driver turns it off. Let the driver fix the clock rate if already active because we do not know the previous timebase value. To avoid unintentional resetting we temporarily set it to its maximum value. Then keep the enable bit if is was previously active. Signed-off-by: Philippe Boos <pboos@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220801092150.4449-1-pboos@baylibre.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: armada_37xx_wdt: Fix .set_timeout callbackPali Rohár
ioctl(WDIOC_SETTIMEOUT) calls .set_timeout and .ping callbacks and it is expected that it changes current watchdog timeout. armada_37xx_wdt's .ping callback just reping counter 0 and does not touch counter 1 used for timeout. So it is needed to set counter 1 to the new value in .set_timeout callback to ensure ioctl(WDIOC_SETTIMEOUT) functionality. Fix it. Fixes: 54e3d9b518c8 ("watchdog: Add support for Armada 37xx CPU watchdog") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20220726085612.10672-1-pali@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: sa1100: make variable sa1100dog_driver staticsunliming
This symbol is not used outside of sa1100_wdt.c, so marks it static. Fixes the following warning: >> drivers/watchdog/sa1100_wdt.c:241:24: sparse: sparse: symbol 'sa1100dog_driver' was not declared. Should it be static? Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: sunliming <sunliming@kylinos.cn> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220802020819.1226454-1-sunliming@kylinos.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: w83977f_wdt: Fix comment typoJason Wang
The double `we' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220802201109.6843-1-wangborong@cdjrlc.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: eurotechwdt: Remove redundant word in commentsshaomin Deng
There is a rebundant word "we" in comments, so remove it. Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220808153956.8374-1-dengshaomin@cdjrlc.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: Check dev_set_name() return valueBo Liu
It's possible that dev_set_name() returns -ENOMEM, catch and handle this. Signed-off-by: Bo Liu <liubo03@inspur.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220920020312.2383-1-liubo03@inspur.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: rzg2l_wdt: Add rzv2m supportPhil Edworthy
The WDT on RZ/V2M devices is basically the same as RZ/G2L, but without the parity error registers. This means the driver has to reset the hardware plus set the minimum timeout in order to do a restart and has a single interrupt. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220823093233.8577-3-phil.edworthy@renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: ftwdt010_wdt: fix test for platform_get_irq() failureDan Carpenter
This code assumes that platform_get_irq() function returns zero on failure. In fact, platform_get_irq() never returns zero. It returns negative error codes or positive non-zero values on success. Fixes: eca10ae6000d ("watchdog: add driver for Cortina Gemini watchdog") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/YvTgRk/ABp62/hNA@kili Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: Exar/MaxLinear XR28V38x driverDavid Müller
Simple driver for the watchdog present in some Exar/MaxLinear UART chips. Please see https://www.maxlinear.com/product/interface/uarts/lpc-uarts/xr28v384 for more info. Signed-off-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220914094605.93377-1-d.mueller@elsoft.ch Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: ftwdt010_wdt: implement _restart() functionSergei Antonov
Implement ftwdt010_wdt_restart(). It enables watchdog with timeout = 0 and disabled IRQ. Since it needs code similar to ftwdt010_wdt_start(), add a new function ftwdt010_enable() and move common code there. Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220829090436.452742-1-saproj@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: w83627hf_wdt: add bootstatus supportHenning Schild
The status bit in the status and control register can tell us whether the last reboot was caused by the watchdog. Make sure to take that into the bootstatus before clearing it. Signed-off-by: Henning Schild <henning.schild@siemens.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220824152448.7736-1-henning.schild@siemens.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: aspeed_wdt: Reorder output signal register configurationChin-Ting Kuo
If the output driving type is push-pull mode, the output polarity should be selected in advance. Otherwise, an unexpected value will be output at the moment of changing to push-pull mode. Thus, output polarity, WDT18[31], must be configured before changing driving type, WDT18[30]. Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Bonnie Lo <Bonnie_Lo@wiwynn.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220819094905.1962513-1-chin-ting_kuo@aspeedtech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog/hpwdt: Enable HP_WATCHDOG for ARM64 systems.Jerry Hoemann
Enable HP_WATCHDOG for ARM64 systems. HPWDT_NMI_DECODING requires X86 as NMI handlers are X86 specific. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220820202821.1263837-3-jerry.hoemann@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog/hpwdt: Include nmi.h only if CONFIG_HPWDT_NMI_DECODINGJerry Hoemann
Fixes: d48b0e173715 ("x86, nmi, drivers: Fix nmi splitup build bug") Arm64 does not support NMI and has no <asm/nmi.h>. Include <asm/nmi.h> only if CONFIG_HPWDT_NMI_DECODING is defined to avoid build failure on non-existent header file on Arm64. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220820202821.1263837-2-jerry.hoemann@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: wdat_wdt: Set the min and max timeout values properlyJean Delvare
The wdat_wdt driver is misusing the min_hw_heartbeat_ms field. This field should only be used when the hardware watchdog device should not be pinged more frequently than a specific period. The ACPI WDAT "Minimum Count" field, on the other hand, specifies the minimum timeout value that can be set. This corresponds to the min_timeout field in Linux's watchdog infrastructure. Setting min_hw_heartbeat_ms instead can cause pings to the hardware to be delayed when there is no reason for that, eventually leading to unexpected firing of the watchdog timer (and thus unexpected reboot). Since commit 6d72c7ac9fbe ("watchdog: wdat_wdt: Using the existing function to check parameter timeout"), min_timeout is being set too, but to the arbitrary value of 1 second, which doesn't make sense and allows setting timeout values lower that the ACPI WDAT "Minimum Count" field. I'm also changing max_hw_heartbeat_ms to max_timeout for symmetry, although the use of this one isn't fundamentally wrong, but there is also no reason to enable the software-driven ping mechanism for the wdat_wdt driver. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Fixes: 6d72c7ac9fbe ("watchdog: wdat_wdt: Using the existing function to check parameter timeout") Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Liu Xinpeng <liuxp11@chinatelecom.cn> Link: https://lore.kernel.org/r/20220823154713.023ee771@endymion.delvare Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: bd9576_wdt: switch to using devm_fwnode_gpiod_get()Dmitry Torokhov
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node() so that gpiolib can be cleaned a bit, so let's switch to the generic fwnode property API. While at it, switch the rest of the calls to read properties in bd9576_wdt_probe() to the generic device property API as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-10-b29adfb27a6c@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-08-28Merge tag 'mm-hotfixes-stable-2022-08-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more hotfixes from Andrew Morton: "Seventeen hotfixes. Mostly memory management things. Ten patches are cc:stable, addressing pre-6.0 issues" * tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: .mailmap: update Luca Ceresoli's e-mail address mm/mprotect: only reference swap pfn page if type match squashfs: don't call kmalloc in decompressors mm/damon/dbgfs: avoid duplicate context directory creation mailmap: update email address for Colin King asm-generic: sections: refactor memory_intersects bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown Revert "memcg: cleanup racy sum avoidance code" mm/zsmalloc: do not attempt to free IS_ERR handle binder_alloc: add missing mmap_lock calls when using the VMA mm: re-allow pinning of zero pfns (again) vmcoreinfo: add kallsyms_num_syms symbol mailmap: update Guilherme G. Piccoli's email addresses writeback: avoid use-after-free after removing device shmem: update folio if shmem_replace_page() updates the page mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
2022-08-28binder_alloc: add missing mmap_lock calls when using the VMALiam Howlett
Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages() and when checking for a VMA in binder_alloc_new_buf_locked(). It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock after it verifies a VMA exists, but may be taken again deeper in the call stack, if necessary. Link: https://lkml.kernel.org/r/20220810160209.1630707-1-Liam.Howlett@oracle.com Fixes: a43cfc87caaf (android: binder: stop saving a pointer to the VMA) Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Ondrej Mosnacek <omosnace@redhat.com> Reported-by: <syzbot+a7b60a176ec13cafb793@syzkaller.appspotmail.com> Acked-by: Carlos Llamas <cmllamas@google.com> Tested-by: Ondrej Mosnacek <omosnace@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Christian Brauner (Microsoft) <brauner@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Martijn Coenen <maco@android.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Todd Kjos <tkjos@android.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: "Arve Hjønnevåg" <arve@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-27Merge tag 'thermal-6.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "Fix two issues introduced recently and one driver problem leading to a NULL pointer dereference in some cases. Specifics: - Add missing EXPORT_SYMBOL_GPL in the thermal core and add back the required 'trips' property to the thermal zone DT bindings (Daniel Lezcano) - Prevent the int340x_thermal driver from crashing when a package with a buffer of 0 length is returned by an ACPI control method evaluated by it (Lee, Chun-Yi)" * tag 'thermal-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR dt-bindings: thermal: Fix missing required property thermal/core: Add missing EXPORT_SYMBOL_GPL
2022-08-27Merge tag 'pm-6.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Make __resolve_freq() check the presence of the frequency table instead of checking whether or not the ->target_index() callback is implemented by the driver, because that need not be the case when __resolve_freq() is used (Lukasz Luba)" * tag 'pm-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: check only freq_table in __resolve_freq()
2022-08-27Merge tag 'acpi-6.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix issues introduced by recent changes related to the handling of ACPI device properties and a coding mistake in the exit path of the ACPI processor driver. Specifics: - Prevent acpi_thermal_cpufreq_exit() from attempting to remove the same frequency QoS request multiple times (Riwen Lu) - Fix type detection for integer ACPI device properties (Stefan Binding) - Avoid emitting false-positive warnings when processing ACPI device properties and drop the useless default case from the acpi_copy_property_array_uint() macro (Sakari Ailus)" * tag 'acpi-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: property: Remove default association from integer maximum values ACPI: property: Ignore already existing data node tags ACPI: property: Fix type detection of unified integer reading functions ACPI: processor: Remove freq Qos request for all CPUs
2022-08-27Merge tag 'for-linus-6.0-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - two minor cleanups - a fix of the xen/privcmd driver avoiding a possible NULL dereference in an error case * tag 'for-linus-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/privcmd: fix error exit of privcmd_ioctl_dm_op() xen: move from strlcpy with unused retval to strscpy xen: x86: remove setting the obsolete config XEN_MAX_DOMAIN_MEMORY
2022-08-27Merge tag 'fbdev-for-6.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes and updates from Helge Deller: "Mostly just small patches, with the exception of the bigger indenting cleanups in the sisfb and radeonfb drivers. Two patches should be mentioned though: A fix-up for fbdev if the screen resize fails (by Shigeru Yoshida), and a potential divide by zero fix in fb_pm2fb (by Letu Ren). Summary: Major fixes: - Revert the changes for fbcon console when vc_resize() fails [Shigeru Yoshida] - Avoid a potential divide by zero error in fb_pm2fb [Letu Ren] Minor fixes: - Add missing pci_disable_device() in chipsfb_pci_init() [Yang Yingliang] - Fix tests for platform_get_irq() failure in omapfb [Yu Zhe] - Destroy mutex on freeing struct fb_info in fbsysfs [Shigeru Yoshida] Cleanups: - Move fbdev drivers from strlcpy to strscpy [Wolfram Sang] - Indenting fixes, comment fixes, ... [Jiapeng Chong & Jilin Yuan]" * tag 'fbdev-for-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: fbcon: Properly revert changes when vc_resize() failed fbdev: Move fbdev drivers from strlcpy to strscpy fbdev: omap: Remove unnecessary print function dev_err() fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init() fbdev: fbcon: Destroy mutex on freeing struct fb_info fbdev: radeon: Clean up some inconsistent indenting fbdev: sisfb: Clean up some inconsistent indenting fbdev: fb_pm2fb: Avoid potential divide by zero error fbdev: ssd1307fb: Fix repeated words in comments fbdev: omapfb: Fix tests for platform_get_irq() failure
2022-08-27Merge branch 'thermal-core'Rafael J. Wysocki
Merge thermal control core fixes for 6.0-rc3: - Fix missing required property for thermal zone description (Daniel Lezcano). - Add missing export symbol for thermal_zone_device_register_with_trips() (Daniel Lezcano). * thermal-core: dt-bindings: thermal: Fix missing required property thermal/core: Add missing EXPORT_SYMBOL_GPL
2022-08-27Merge branch 'acpi-processor' into acpiRafael J. Wysocki
* acpi-processor: ACPI: processor: Remove freq Qos request for all CPUs
2022-08-26Merge tag 'drm-fixes-2022-08-26-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes, lots of amdgpu fixes mostly for IP blocks introduced in 6.0-rc1, otherwise vc4, nouveau fixes. gem: - Fix handle release leak nouveau: - Fix fencing when moving BO vc4: - HDMI fixes amdgpu: - GFX 11.0 fixes - PSP XGMI handling fixes - GFX9 fix for compute-only IPs - Drop duplicated function call - Fix warning due to missing header - NBIO 7.7 fixes - DCN 3.1.4 fixes - SDMA 6.0 fixes - SMU 13.0 fixes - Arcturus GPUVM page table fix - MMHUB 1.0 fix amdkfd: - GC 10.3.7 fix radeon: - Delayed work flush fix" * tag 'drm-fixes-2022-08-26-1' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amdgpu: mmVM_L2_CNTL3 register not initialized correctly drm/amdgpu: add MGCG perfmon setting for gfx11 drm/amdkfd: Fix isa version for the GC 10.3.7 drm/amdgpu: Fix page table setup on Arcturus drm/amd/pm: update SMU 13.0.0 driver_if header drm/amdgpu: add sdma instance check for gfx11 CGCG drm/amd/display: enable PCON support for dcn314 drm/amdgpu: enable NBIO IP v7.7.0 Clock Gating drm/amdgpu: add NBIO IP v7.7.0 Clock Gating support drm/amdgpu: add TX_POWER_CTRL_1 macro definitions for NBIO IP v7.7.0 nouveau: explicitly wait on the fence in nouveau_bo_move_m2mf drm/radeon: add a force flush to delay work when radeon drm/amd/display: Include missing header drm/amdgpu: Remove the additional kfd pre reset call for sriov drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup. drm/amdgpu: fix hive reference leak when adding xgmi device drm/amdgpu: Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini drm/amdgpu: enable GFXOFF allow control for GC IP v11.0.1 drm/gem: Fix GEM handle release errors drm/vc4: hdmi: Rework power up ...
2022-08-26Merge tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - MD pull request via Song: - Fix for clustered raid (Guoqing Jiang) - req_op fix (Bart Van Assche) - Fix race condition in raid recreate (David Sloan) - loop configuration overflow fix (Siddh) - Fix missing commit_rqs call for certain conditions (Yu) * tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-block: md: call __md_stop_writes in md_stop Revert "md-raid: destroy the bitmap after destroying the thread" md: Flush workqueue md_rdev_misc_wq in md_alloc() md/raid10: Fix the data type of an r10_sync_page_io() argument loop: Check for overflow while configuring loop blk-mq: fix io hung due to missing commit_rqs
2022-08-26fbdev: fbcon: Properly revert changes when vc_resize() failedShigeru Yoshida
fbcon_do_set_font() calls vc_resize() when font size is changed. However, if if vc_resize() failed, current implementation doesn't revert changes for font size, and this causes inconsistent state. syzbot reported unable to handle page fault due to this issue [1]. syzbot's repro uses fault injection which cause failure for memory allocation, so vc_resize() failed. This patch fixes this issue by properly revert changes for font related date when vc_resize() failed. Link: https://syzkaller.appspot.com/bug?id=3443d3a1fa6d964dd7310a0cb1696d165a3e07c4 [1] Reported-by: syzbot+a168dbeaaa7778273c1b@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: Helge Deller <deller@gmx.de> CC: stable@vger.kernel.org # 5.15+
2022-08-26Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Ten fixes. Of the three core changes, the two large ones are a complete reversion of the async rework and an ALUA timing rework (the latter shouldn't affect non-ALUA paths). The remaining patches are all small and all but one in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Revert "Rework asynchronous resume support" scsi: core: Fix passthrough retry counter handling scsi: ufs: core: Reduce the power mode change timeout scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq scsi: ufs: host: ufs-exynos: Make fsd_ufs_drvs static scsi: megaraid_sas: Remove unnecessary kfree() scsi: megaraid_sas: Fix double kfree() scsi: ufs: core: Enable link lost interrupt scsi: core: Allow the ALUA transitioning state enough time scsi: qla2xxx: Disable ATIO interrupt coalesce for quad port ISP27XX
2022-08-26Merge tag 'amd-drm-fixes-6.0-2022-08-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-08-25: amdgpu: - GFX 11.0 fixes - PSP XGMI handling fixes - GFX9 fix for compute-only IPs - Drop duplicated function call - Fix warning due to missing header - NBIO 7.7 fixes - DCN 3.1.4 fixes - SDMA 6.0 fixes - SMU 13.0 fixes - Arcturus GPUVM page table fix - MMHUB 1.0 fix amdkfd: - GC 10.3.7 fix radeon: - Delayed work flush fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220825181243.5853-1-alexander.deucher@amd.com
2022-08-26Merge tag 'drm-misc-fixes-2022-08-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * gem: Fixes handle release leak * nouveau: Fix fencing when moving BO * vc4: HDMI fixes * Backmerging for v6.0-rc1 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YwclSWheC+Ai+u+v@linux-uq9g
2022-08-25Merge tag 'net-6.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec and netfilter (with one broken Fixes tag). Current release - new code bugs: - dsa: don't dereference NULL extack in dsa_slave_changeupper() - dpaa: fix <1G ethernet on LS1046ARDB - neigh: don't call kfree_skb() under spin_lock_irqsave() Previous releases - regressions: - r8152: fix the RX FIFO settings when suspending - dsa: microchip: keep compatibility with device tree blobs with no phy-mode - Revert "net: macsec: update SCI upon MAC address change." - Revert "xfrm: update SA curlft.use_time", comply with RFC 2367 Previous releases - always broken: - netfilter: conntrack: work around exceeded TCP receive window - ipsec: fix a null pointer dereference of dst->dev on a metadata dst in xfrm_lookup_with_ifid - moxa: get rid of asymmetry in DMA mapping/unmapping - dsa: microchip: make learning configurable and keep it off while standalone - ice: xsk: prohibit usage of non-balanced queue id - rxrpc: fix locking in rxrpc's sendmsg Misc: - another chunk of sysctl data race silencing" * tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) net: lantiq_xrx200: restore buffer if memory allocation failed net: lantiq_xrx200: fix lock under memory pressure net: lantiq_xrx200: confirm skb is allocated before using net: stmmac: work around sporadic tx issue on link-up ionic: VF initial random MAC address if no assigned mac ionic: fix up issues with handling EAGAIN on FW cmds ionic: clear broken state on generation change rxrpc: Fix locking in rxrpc's sendmsg net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2 MAINTAINERS: rectify file entry in BONDING DRIVER i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter net: Fix a data-race around sysctl_somaxconn. net: Fix a data-race around netdev_unregister_timeout_secs. net: Fix a data-race around gro_normal_batch. net: Fix data-races around sysctl_devconf_inherit_init_net. net: Fix data-races around sysctl_fb_tunnels_only_for_init_net. net: Fix a data-race around netdev_budget_usecs. net: Fix data-races around sysctl_max_skb_frags. net: Fix a data-race around netdev_budget. ...
2022-08-25net: lantiq_xrx200: restore buffer if memory allocation failedAleksander Jan Bajkowski
In a situation where memory allocation fails, an invalid buffer address is stored. When this descriptor is used again, the system panics in the build_skb() function when accessing memory. Fixes: 7ea6cd16f159 ("lantiq: net: fix duplicated skb in rx descriptor ring") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25net: lantiq_xrx200: fix lock under memory pressureAleksander Jan Bajkowski
When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll function immediately returns an error. This is incorrect for two reasons: * the function terminates without enabling interrupts or scheduling NAPI, * the error code (-ENOMEM) is returned instead of the number of received packets. After the first memory allocation failure occurs, packet reception is locked due to disabled interrupts from DMA.. Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25net: lantiq_xrx200: confirm skb is allocated before usingAleksander Jan Bajkowski
xrx200_hw_receive() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. Add a check in case build_skb() failed to allocate and return NULL. Fixes: e015593573b3 ("net: lantiq_xrx200: convert to build_skb") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25net: stmmac: work around sporadic tx issue on link-upHeiner Kallweit
This is a follow-up to the discussion in [0]. It seems to me that at least the IP version used on Amlogic SoC's sometimes has a problem if register MAC_CTRL_REG is written whilst the chip is still processing a previous write. But that's just a guess. Adding a delay between two writes to this register helps, but we can also simply omit the offending second write. This patch uses the second approach and is based on a suggestion from Qi Duan. Benefit of this approach is that we can save few register writes, also on not affected chip versions. [0] https://www.spinics.net/lists/netdev/msg831526.html Fixes: bfab27a146ed ("stmmac: add the experimental PCI support") Suggested-by: Qi Duan <qi.duan@amlogic.com> Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e) This series contains updates to ixgbe and i40e drivers. Jake stops incorrect resetting of SYSTIME registers when starting cyclecounter for ixgbe. Sylwester corrects a check on source IP address when validating destination for i40e. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter ==================== Link: https://lore.kernel.org/r/20220824193748.874343-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25ionic: VF initial random MAC address if no assigned macR Mohamed Shah
Assign a random mac address to the VF interface station address if it boots with a zero mac address in order to match similar behavior seen in other VF drivers. Handle the errors where the older firmware does not allow the VF to set its own station address. Newer firmware will allow the VF to set the station mac address if it hasn't already been set administratively through the PF. Setting it will also be allowed if the VF has trust. Fixes: fbb39807e9ae ("ionic: support sr-iov operations") Signed-off-by: R Mohamed Shah <mohamed@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-09 03:36:52 +0000