summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-09-20Merge tag 'tty-5.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial/fbcon fixes from Greg KH: "Here are some small tty/serial and one more fbcon fix. They include: - serial core locking regression fixes - new device ids for 8250_pci driver - fbcon fix for syzbot found issue All have been in linux-next with no reported issues" * tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fbcon: Fix user font detection test at fbcon_resize(). serial: 8250_pci: Add Realtek 816a and 816b serial: core: fix console port-lock regression serial: core: fix port-lock initialisation
2020-09-20Merge tag 'edac_urgent_for_v5.9_rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: "Two fixes for resulting from CONFIG_DEBUG_TEST_DRIVER_REMOVE=y experiments: - complete a previous fix to reset a local structure containing scanned system data properly so that the driver rescans, as it should, on a second load. - address a refcount underflow due to not paying attention to the driver whitelest on unregister" * tag 'edac_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ghes: Check whether the driver is on the safe list correctly EDAC/ghes: Clear scanned data on unload
2020-09-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a couple of driver quirks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: trackpoint - add new trackpoint variant IDs Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists
2020-09-20dax: Fix stack overflow when mounting fsdax pmem deviceAdrian Huang
When mounting fsdax pmem device, commit 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices") introduces the stack overflow [1][2]. Here is the call path for mounting ext4 file system: ext4_fill_super bdev_dax_supported __bdev_dax_supported dax_supported generic_fsdax_supported __generic_fsdax_supported bdev_dax_supported The call path leads to the infinite calling loop, so we cannot call bdev_dax_supported() in __generic_fsdax_supported(). The sanity checking of the variable 'dax_dev' is moved prior to the two bdev_dax_pgoff() checks [3][4]. [1] https://lore.kernel.org/linux-nvdimm/1420999447.1004543.1600055488770.JavaMail.zimbra@redhat.com/ [2] https://lore.kernel.org/linux-nvdimm/alpine.LRH.2.02.2009141131220.30651@file01.intranet.prod.int.rdu2.redhat.com/ [3] https://lore.kernel.org/linux-nvdimm/CA+RJvhxBHriCuJhm-D8NvJRe3h2MLM+ZMFgjeJjrRPerMRLvdg@mail.gmail.com/ [4] https://lore.kernel.org/linux-nvdimm/20200903160608.GU878166@iweiny-DESK2.sc.intel.com/ Fixes: 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices") Reported-by: Yi Zhang <yi.zhang@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> Cc: Coly Li <colyli@suse.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: John Pittman <jpittman@redhat.com> Link: https://lore.kernel.org/r/20200917111549.6367-1-adrianhuang0701@gmail.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-09-20dm: Call proper helper to determine dax supportJan Kara
DM was calling generic_fsdax_supported() to determine whether a device referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that they don't have to duplicate common generic checks. High level code should call dax_supported() helper which that calls into appropriate helper for the particular device. This problem manifested itself as kernel messages: dm-3: error: dax access failed (-95) when lvm2-testsuite run in cases where a DM device was stacked on top of another DM device. Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices") Cc: <stable@vger.kernel.org> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mike Snitzer <snitzer@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-09-20dm/dax: Fix table reference countsDan Williams
A recent fix to the dm_dax_supported() flow uncovered a latent bug. When dm_get_live_table() fails it is still required to drop the srcu_read_lock(). Without this change the lvm2 test-suite triggers this warning: # lvm2-testsuite --only pvmove-abort-all.sh WARNING: lock held when returning to user space! 5.9.0-rc5+ #251 Tainted: G OE ------------------------------------------------ lvm/1318 is leaving the kernel with locks still held! 1 lock held by lvm/1318: #0: ffff9372abb5a340 (&md->io_barrier){....}-{0:0}, at: dm_get_live_table+0x5/0xb0 [dm_mod] ...and later on this hang signature: INFO: task lvm:1344 blocked for more than 122 seconds. Tainted: G OE 5.9.0-rc5+ #251 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:lvm state:D stack: 0 pid: 1344 ppid: 1 flags:0x00004000 Call Trace: __schedule+0x45f/0xa80 ? finish_task_switch+0x249/0x2c0 ? wait_for_completion+0x86/0x110 schedule+0x5f/0xd0 schedule_timeout+0x212/0x2a0 ? __schedule+0x467/0xa80 ? wait_for_completion+0x86/0x110 wait_for_completion+0xb0/0x110 __synchronize_srcu+0xd1/0x160 ? __bpf_trace_rcu_utilization+0x10/0x10 __dm_suspend+0x6d/0x210 [dm_mod] dm_suspend+0xf6/0x140 [dm_mod] Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices") Cc: <stable@vger.kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Reported-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Link: https://lore.kernel.org/r/160045867590.25663.7548541079217827340.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-09-19Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Another bunch of fixes for I2C. Jean's i801 patch is a cleanup on top of Volker's i801 patch, but it will make dependency handling much easier if those two go together" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK i2c: mediatek: Send i2c master code at more than 1MHz i2c: mediatek: Fix generic definitions for bus frequency i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices() i2c: i801: Simplify the suspend callback i2c: i801: Fix resume bug i2c: aspeed: Mask IRQ status to relevant bits
2020-09-19RISC-V: Resurrect the MMIO timer implementation for M-mode systemsPalmer Dabbelt
The K210 doesn't implement rdtime in M-mode, and since that's where Linux runs in the NOMMU systems that means we can't use rdtime. The K210 is the only system that anyone is currently running NOMMU or M-mode on, so here we're just inlining the timer read directly. This also adds the CLINT driver as an !MMU dependency, as it's currently the only timer driver availiable for these systems and without it we get a build failure for some configurations. Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-09-18Merge tag 's390-5.9-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix order in trace_hardirqs_off_caller() to make locking state consistent even if the IRQ tracer calls into lockdep again. Touches common code. Acked-by Peter Zijlstra. - Correctly handle secure storage violation exception to avoid kernel panic triggered by user space misbehaviour. - Switch the idle->seqcount over to using raw_write_*() to avoid "suspicious RCU usage". - Fix memory leaks on hard unplug in pci code. - Use kvmalloc instead of kmalloc for larger allocations in zcrypt. - Add few missing __init annotations to static functions to avoid section mismatch complains when functions are not inlined. * tag 's390-5.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: add 3f program exception handler lockdep: fix order in trace_hardirqs_off_caller() s390/pci: fix leak of DMA tables on hard unplug s390/init: add missing __init annotations s390/zcrypt: fix kmalloc 256k failure s390/idle: fix suspicious RCU usage
2020-09-18dpaa2-eth: fix a build warning in dpmac.cYangbo Lu
Fix below sparse warning in dpmac.c. warning: cast to restricted __le64 Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: hns: kerneldoc fixesLu Wei
Fix some parameter description mistakes. Signed-off-by: Lu Wei <luwei32@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACKMatthias Schiffer
The driver-specific usage of the DMA_CTRL_ACK flag was replaced with a custom flag in commit ceeeb99cd821 ("dmaengine: mxs: rename custom flag"), but i2c-mxs was not updated to use the new flag, completely breaking I2C transactions using DMA. Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18hinic: fix sending pkts from core while self testingLuo bin
Call netif_tx_disable firstly before starting doing self-test to avoid sending packet from networking core and self-test packet simultaneously which may cause self-test failure or hw abnormal. Fixes: 4aa218a4fe77 ("hinic: add self test support") Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: deinitialize only initialized portsVladimir Oltean
Currently mscc_ocelot_init_ports() will skip initializing a port when it doesn't have a phy-handle, so the ocelot->ports[port] pointer will be NULL. Take this into consideration when tearing down the driver, and add a new function ocelot_deinit_port() to the switch library, mirror of ocelot_init_port(), which needs to be called by the driver for all ports it has initialized. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: unregister net devices on unbindVladimir Oltean
This driver was not unregistering its network interfaces on unbind. Now it is. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: refactor ports parsing code into a dedicated functionVladimir Oltean
mscc_ocelot_probe() is already pretty large and hard to follow. So move the code for parsing ports in a separate function. This makes it easier for the next patch to just call mscc_ocelot_release_ports from the error path of mscc_ocelot_init_ports. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: error checking when calling ocelot_init()Vladimir Oltean
ocelot_init() allocates memory, resets the switch and polls for a status register, things which can fail. Stop probing the driver in that case, and propagate the error result. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: check for errors on memory allocation of portsVladimir Oltean
Do not proceed probing if we couldn't allocate memory for the ports array, just error out. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: dsa: seville: fix buffer size of the queue systemVladimir Oltean
The VSC9953 Seville switch has 2 megabits of buffer split into 4360 words of 60 bytes each. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: add locking for the port TX timestamp IDVladimir Oltean
The ocelot_port->ts_id is used to: (a) populate skb->cb[0] for matching the TX timestamp in the PTP IRQ with an skb. (b) populate the REW_OP from the injection header of the ongoing skb. Only then is ocelot_port->ts_id incremented. This is a problem because, at least theoretically, another timestampable skb might use the same ocelot_port->ts_id before that is incremented. Normally all transmit calls are serialized by the netdev transmit spinlock, but in this case, ocelot_port_add_txtstamp_skb() is also called by DSA, which has started declaring the NETIF_F_LLTX feature since commit 2b86cb829976 ("net: dsa: declare lockless TX feature for slave ports"). So the logic of using and incrementing the timestamp id should be atomic per port. The solution is to use the global ocelot_port->ts_id only while protected by the associated ocelot_port->ts_id_lock. That's where we populate skb->cb[0]. Note that for ocelot, ocelot_port_add_txtstamp_skb is called for the actual skb, but for felix, it is called for the skb's clone. That is something which will also be changed in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: fix race condition with TX timestampingVladimir Oltean
The TX-timestampable skb is added late to the ocelot_port->tx_skbs. It is in a race with the TX timestamp IRQ, which checks that queue trying to match the timestamp with the skb by the ts_id. The skb should be added to the queue before the IRQ can fire. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18i2c: mediatek: Send i2c master code at more than 1MHzQii Wang
The master code needs to being sent when the speed is more than I2C_MAX_FAST_MODE_PLUS_FREQ, not I2C_MAX_FAST_MODE_FREQ in the latest I2C-bus specification and user manual. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: mediatek: Fix generic definitions for bus frequencyQii Wang
The max frequency of mediatek i2c controller driver is I2C_MAX_HIGH_SPEED_MODE_FREQ, not I2C_MAX_FAST_MODE_PLUS_FREQ. Fix it. Fixes: 90224e6468e1 ("i2c: drivers: Use generic definitions for bus frequencies") Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18Merge tag 'powerpc-5.9-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.9: - Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing crashes. - Fix a long standing bug in our DMA mask handling that was hidden until recently, and which caused problems with some drivers. - Fix a boot failure on systems with large amounts of RAM, and no hugepage support and using Radix MMU, only seen in the lab. - A few other minor fixes. Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy, Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav Jain, and Vaidyanathan Srinivasan" * tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute cpuidle: pseries: Fix CEDE latency conversion from tb to us powerpc/dma: Fix dma_map_ops::get_required_mask Revert "powerpc/build: vdso linker warning for orphan sections" powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc selftests/powerpc: Skip PROT_SAO test in guests/LPARS powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
2020-09-18Merge tag 'pm-5.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new CPU ID to the RAPL power capping driver and prevent the ACPI processor idle driver from triggering RCU-lockdep complaints. Specifics: - Add support for the Lakefield chip to the RAPL power capping driver (Ricardo Neri). - Modify the ACPI processor idle driver to prevent it from triggering RCU-lockdep complaints which has started to happen after recent changes in that area (Peter Zijlstra)" * tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: processor: Take over RCU-idle for C3-BM idle cpuidle: Allow cpuidle drivers to take over RCU-idle ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP powercap: RAPL: Add support for Lakefield
2020-09-18Merge tag 'iommu-fixes-v5.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Two fixes for the AMD IOMMU driver: - Fix a potential NULL-ptr dereference found by smatch - Fix interrupt remapping when a device is assigned to a guest and AVIC is enabled" * tag 'iommu-fixes-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_mode iommu/amd: Fix potential @entry null deref
2020-09-18Merge tag 'mtd/fixes-for-5.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD/SPI NOR fixes from Vignesh Raghavendra: "Revert patches that caused non volatile Quad Enable bit to be cleared for certain SPI NOR flashes during module remove or during shutdown, thus breaking backward compatibility" Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> * tag 'mtd/fixes-for-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: Revert "mtd: spi-nor: Add capability to disable flash quad mode" Revert "mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()"
2020-09-18Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: ACPI: processor: Take over RCU-idle for C3-BM idle cpuidle: Allow cpuidle drivers to take over RCU-idle ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
2020-09-18regmap: debugfs: Add back in erroneously removed initialisation of retCharles Keepax
Fixes: 94cc89eb8fa5 ("regmap: debugfs: Fix handling of name string for debugfs init delays") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200918112002.15216-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-18iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_modeSuravee Suthikulpanit
Commit e52d58d54a32 ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE") removed an assumption that modify_irte_ga always set the valid bit, which requires the callers to set the appropriate value for the struct irte_ga.valid bit before calling the function. Similar to the commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE"), which is for the function amd_iommu_deactivate_guest_mode(). The same change is also needed for the amd_iommu_activate_guest_mode(). Otherwise, this could trigger IO_PAGE_FAULT for the VFIO based VMs with AVIC enabled. Fixes: e52d58d54a321 ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Cc: Joao Martins <joao.m.martins@oracle.com> Link: https://lore.kernel.org/r/20200916111720.43913-1-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-18iommu/amd: Fix potential @entry null derefJoao Martins
After commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE"), smatch warns: drivers/iommu/amd/iommu.c:3870 amd_iommu_deactivate_guest_mode() warn: variable dereferenced before check 'entry' (see line 3867) Fix this by moving the @valid assignment to after @entry has been checked for NULL. Fixes: 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20200910171621.12879-1-joao.m.martins@oracle.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-09-17drm/amdgpu: remove experimental flag from navi12Alex Deucher
Navi12 has worked fine for a while now. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: add device ID for sienna_cichlid (v2)Likun Gao
Add device ID for sienna_cichlid. v2: squash in additional device ids. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: use the AV1 defines for VCN 3.0Alex Deucher
Switch from magic numbers to defines for AV1 clockgating. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: add VCN 3.0 AV1 registersAlex Deucher
This adds the AV1 registers. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: add the GC 10.3 VRS registersAlex Deucher
Add the VRS registers. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17drm/amdgpu: prevent double kfree ttm->sgPhilip Yang
Set ttm->sg to NULL after kfree, to avoid memory corruption backtrace: [ 420.932812] kernel BUG at /build/linux-do9eLF/linux-4.15.0/mm/slub.c:295! [ 420.934182] invalid opcode: 0000 [#1] SMP NOPTI [ 420.935445] Modules linked in: xt_conntrack ipt_MASQUERADE [ 420.951332] Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 1.5.4 07/09/2020 [ 420.952887] RIP: 0010:__slab_free+0x180/0x2d0 [ 420.954419] RSP: 0018:ffffbe426291fa60 EFLAGS: 00010246 [ 420.955963] RAX: ffff9e29263e9c30 RBX: ffff9e29263e9c30 RCX: 000000018100004b [ 420.957512] RDX: ffff9e29263e9c30 RSI: fffff3d33e98fa40 RDI: ffff9e297e407a80 [ 420.959055] RBP: ffffbe426291fb00 R08: 0000000000000001 R09: ffffffffc0d39ade [ 420.960587] R10: ffffbe426291fb20 R11: ffff9e49ffdd4000 R12: ffff9e297e407a80 [ 420.962105] R13: fffff3d33e98fa40 R14: ffff9e29263e9c30 R15: ffff9e2954464fd8 [ 420.963611] FS: 00007fa2ea097780(0000) GS:ffff9e297e840000(0000) knlGS:0000000000000000 [ 420.965144] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 420.966663] CR2: 00007f16bfffefb8 CR3: 0000001ff0c62000 CR4: 0000000000340ee0 [ 420.968193] Call Trace: [ 420.969703] ? __page_cache_release+0x3c/0x220 [ 420.971294] ? amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.972789] kfree+0x168/0x180 [ 420.974353] ? amdgpu_ttm_tt_set_user_pages+0x64/0xc0 [amdgpu] [ 420.975850] ? kfree+0x168/0x180 [ 420.977403] amdgpu_ttm_tt_unpopulate+0x5e/0x80 [amdgpu] [ 420.978888] ttm_tt_unpopulate.part.10+0x53/0x60 [amdttm] [ 420.980357] ttm_tt_destroy.part.11+0x4f/0x60 [amdttm] [ 420.981814] ttm_tt_destroy+0x13/0x20 [amdttm] [ 420.983273] ttm_bo_cleanup_memtype_use+0x36/0x80 [amdttm] [ 420.984725] ttm_bo_release+0x1c9/0x360 [amdttm] [ 420.986167] amdttm_bo_put+0x24/0x30 [amdttm] [ 420.987663] amdgpu_bo_unref+0x1e/0x30 [amdgpu] [ 420.989165] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x9ca/0xb10 [amdgpu] [ 420.990666] kfd_ioctl_alloc_memory_of_gpu+0xef/0x2c0 [amdgpu] Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-17nfp: use correct define to return NONE fecJakub Kicinski
struct ethtool_fecparam carries bitmasks not bit numbers. We want to return 1 (NONE), not 0. Fixes: 0d0870938337 ("nfp: implement ethtool FEC mode settings") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17Merge tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "A bunch of small fixes, some of the i915 ones have been out for a while and got better commit msg explaining some better reasoning behind them (hopefully this trend continues). Otherwise there a few AMD related ones mostly small, one radeon PLL regression fix and a bunch of small mediatek fixes. amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards i915: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function mediatek: - Fix scrolling of panel - Remove duplicated include - Use CPU when fail to get cmdq event - Add missing put_device() call" * tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amd/display: Don't log hdcp module warnings in dmesg drm/amdgpu: declare ta firmware for navy_flounder drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata() drm/mediatek: Add missing put_device() call in mtk_drm_kms_init() drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init() drm/mediatek: Use CPU when fail to get cmdq event drm/mediatek: Remove duplicated include drm/i915: Filter wake_flags passed to default_wake_function drm/i915: Be wary of data races when reading the active execlists drm/i915/gem: Reduce context termination list iteration guard to RCU drm/i915/gem: Delay tracking the GEM context until it is registered drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is drm/radeon: revert "Prefer lower feedback dividers" drm/amdgpu: Include sienna_cichlid in USBC PD FW support. drm/amd/display: update nv1x stutter latencies drm/amd/display: Don't use DRM_ERROR() for DTM add topology drm/amd/pm: support runtime pptable update for sienna_cichlid etc. drm/amdkfd: fix a memory leak issue drm/kfd: fix a system crash issue during GPU recovery ...
2020-09-17hinic: fix potential resource leakWei Li
In rx_request_irq(), it will just return what irq_set_affinity_hint() returns. If it is failed, the napi and irq requested are not freed properly. So add exits for failures to handle these. Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: phy: Do not warn in phy_stop() on PHY_DOWNFlorian Fainelli
When phy_is_started() was added to catch incorrect PHY states, phy_stop() would not be qualified against PHY_DOWN. It is possible to reach that state when the PHY driver has been unbound and the network device is then brought down. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: phy: Avoid NPD upon phy_detach() when driver is unboundFlorian Fainelli
If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are: echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17drivers/net/wan/hdlc: Set skb->protocol before transmittingXie He
This patch sets skb->protocol before transmitting frames on the HDLC device, so that a user listening on the HDLC device with an AF_PACKET socket will see outgoing frames' sll_protocol field correctly set and consistent with that of incoming frames. 1. Control frames in hdlc_cisco and hdlc_ppp When these drivers send control frames, skb->protocol is not set. This value should be set to htons(ETH_P_HDLC), because when receiving control frames, their skb->protocol is set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, which then calls cisco_type_trans or ppp_type_trans. The skb->protocol of control frames is set to htons(ETH_P_HDLC) so that the control frames can be received by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the control frames. 2. hdlc_fr When this driver sends control frames, skb->protocol is set to internal values used in this driver. When this driver sends data frames (from upper stacked PVC devices), skb->protocol is the same as that of the user data packet being sent on the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3) (for Ethernet-emulating PVC devices). However, skb->protocol for both control frames and data frames should be set to htons(ETH_P_HDLC), because when receiving, all frames received on the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, and because this driver doesn't provide a type_trans function in struct hdlc_proto, all frames will have their skb->protocol set to htons(ETH_P_HDLC). The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx to process the frames (control frames are consumed and data frames are re-received on upper PVC devices). Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17drivers/net/wan/lapbether: Make skb->protocol consistent with the headerXie He
This driver is a virtual driver stacked on top of Ethernet interfaces. When this driver transmits data on the Ethernet device, the skb->protocol setting is inconsistent with the Ethernet header prepended to the skb. This causes a user listening on the Ethernet interface with an AF_PACKET socket, to see different sll_protocol values for incoming and outgoing frames, because incoming frames would have this value set by parsing the Ethernet header. This patch changes the skb->protocol value for outgoing Ethernet frames, making it consistent with the Ethernet header prepended. This makes a user listening on the Ethernet device with an AF_PACKET socket, to see the same sll_protocol value for incoming and outgoing frames. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17cxgb4: fix memory leak during module unloadRaju Rangoju
Fix the memory leak in mps during module unload path by freeing mps reference entries if the list adpter->mps_ref is not already empty Fixes: 28b3870578ef ("cxgb4: Re-work the logic for mps refcounting") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17hv_netvsc: Add validation for untrusted Hyper-V valuesAndres Beltran
For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest in the host-to-guest ring buffer. Ensure that invalid values cannot cause indexing off the end of an array, or subvert an existing validation via integer overflow. Ensure that outgoing packets do not have any leftover guest memory that has not been zeroed out. Signed-off-by: Andres Beltran <lkmlabelt@gmail.com> Co-developed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18Merge tag 'mediatek-drm-fixes-5.9' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.9 1. Fix scrolling of panel 2. Remove duplicated include 3. Use CPU when fail to get cmdq event 4. Add missing put_device() call Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200916231724.30571-1-chunkuang.hu@kernel.org
2020-09-18Merge tag 'drm-intel-fixes-2020-09-17' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc6: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y2l8vlj3.fsf@intel.com
2020-09-18Merge tag 'amd-drm-fixes-5.9-2020-09-17' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-09-17: amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043818.3717-1-alexander.deucher@amd.com
2020-09-17i2c: core: Call i2c_acpi_install_space_handler() before ↵Hans de Goede
i2c_acpi_register_devices() Some ACPI i2c-devices _STA method (which is used to detect if the device is present) use autodetection code which probes which device is present over i2c. This requires the I2C ACPI OpRegion handler to be registered before we enumerate i2c-clients under the i2c-adapter. This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and ThinkBook 15 IIL not getting an i2c-client instantiated and thus not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-10 22:51:21 +0000