summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-09-02nfp: flower: fix ABI mismatch between driver and firmwareLouis Peens
Fix an issue where the driver wrongly detected ipv6 neighbour updates from the NFP as corrupt. Add a reserved field on the kernel side so it is similar to the ipv4 version of the struct and has space for the extra bytes from the card. Fixes: 9ea9bfa12240 ("nfp: flower: support ipv6 tunnel keep-alive messages from fw") Signed-off-by: Louis Peens <louis.peens@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02drivers/net/wan/hdlc: Change the default of hard_header_len to 0Xie He
Change the default value of hard_header_len in hdlc.c from 16 to 0. Currently there are 6 HDLC protocol drivers, among them: hdlc_raw_eth, hdlc_cisco, hdlc_ppp, hdlc_x25 set hard_header_len when attaching the protocol, overriding the default. So this patch does not affect them. hdlc_raw and hdlc_fr don't set hard_header_len when attaching the protocol. So this patch will change the hard_header_len of the HDLC device for them from 16 to 0. This is the correct change because both hdlc_raw and hdlc_fr don't have header_ops, and the code in net/packet/af_packet.c expects the value of hard_header_len to be consistent with header_ops. In net/packet/af_packet.c, in the packet_snd function, for AF_PACKET/DGRAM sockets it would reserve a headroom of hard_header_len and call dev_hard_header to fill in that headroom, and for AF_PACKET/RAW sockets, it does not reserve the headroom and does not call dev_hard_header, but checks if the user has provided a header of length hard_header_len (in function dev_validate_header). Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02net: gemini: Fix another missing clk_disable_unprepare() in probeDan Carpenter
We recently added some calls to clk_disable_unprepare() but we missed the last error path if register_netdev() fails. I made a couple cleanups so we avoid mistakes like this in the future. First I reversed the "if (!ret)" condition and pulled the code in one indent level. Also, the "port->netdev = NULL;" is not required because "port" isn't used again outside this function so I deleted that line. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02RDMA/core: Fix reported speed and widthKamal Heib
When the returned speed from __ethtool_get_link_ksettings() is SPEED_UNKNOWN this will lead to reporting a wrong speed and width for providers that uses ib_get_eth_speed(), fix that by defaulting the netdev_speed to SPEED_1000 in case the returned value from __ethtool_get_link_ksettings() is SPEED_UNKNOWN. Fixes: d41861942fc5 ("IB/core: Add generic function to extract IB speed from netdev") Link: https://lore.kernel.org/r/20200902124304.170912-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - data sanitization and validtion fixes for report descriptor parser from Marc Zyngier - memory leak fix for hid-elan driver from Dinghao Liu - two device-specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: core: Sanitize event code and type when mapping input HID: core: Correctly handle ReportSize being zero HID: elan: Fix memleak in elan_input_configured HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices
2020-09-02net: bcmgenet: fix mask check in bcmgenet_validate_flow()Denis Efremov
VALIDATE_MASK(eth_mask->h_source) is checked twice in a row in bcmgenet_validate_flow(). Add VALIDATE_MASK(eth_mask->h_dest) instead. Fixes: 3e370952287c ("net: bcmgenet: add support for ethtool rxnfc flows") Signed-off-by: Denis Efremov <efremov@linux.com> Acked-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02amd-xgbe: Add support for new port modeShyam Sundar S K
Add support for a new port mode that is a backplane connection without support for auto negotiation. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02Merge tag 'for-5.9/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - writecache fix to allow dax_direct_access() to partitioned pmem devices. - multipath fix to avoid any Path Group initialization if 'pg_init_in_progress' isn't set. - crypt fix to use DECLARE_CRYPTO_WAIT() for onstack wait structures. - integrity fix to properly check integrity after device creation when in bitmap mode. - thinp and cache target __create_persistent_data_objects() fixes to reset the metadata's dm_block_manager pointer from PTR_ERR to NULL before returning from error path. - persistent-data block manager fix to guard against dm_block_manager NULL pointer dereference in dm_bm_is_read_only() and update various opencoded bm->read_only checks to use dm_bm_is_read_only() instead. * tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin metadata: Fix use-after-free in dm_bm_set_read_only dm thin metadata: Avoid returning cmd->bm wild pointer on error dm cache metadata: Avoid returning cmd->bm wild pointer on error dm integrity: fix error reporting in bitmap mode after creation dm crypt: Initialize crypto wait structures dm mpath: fix racey management of PG initialization dm writecache: handle DAX to partitions on persistent memory correctly
2020-09-02RDMA/core: Fix unsafe linked list traversal after failing to allocate CQXi Wang
It's not safe to access the next CQ in list_for_each_entry() after invoking ib_free_cq(), because the CQ has already been freed in current iteration. It should be replaced by list_for_each_entry_safe(). Fixes: c7ff819aefea ("RDMA/core: Introduce shared CQ pool API") Link: https://lore.kernel.org/r/1598963935-32335-1-git-send-email-liweihang@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-02spi: spi-loopback-test: Fix out-of-bounds readVincent Whitchurch
The "tx/rx-transfer - crossing PAGE_SIZE" test always fails when len=131071 and rx_offset >= 5: spi-loopback-test spi0.0: Running test tx/rx-transfer - crossing PAGE_SIZE ... with iteration values: len = 131071, tx_off = 0, rx_off = 3 with iteration values: len = 131071, tx_off = 0, rx_off = 4 with iteration values: len = 131071, tx_off = 0, rx_off = 5 loopback strangeness - rx changed outside of allowed range at: ...a4321000 spi_msg@ffffffd5a4157690 frame_length: 131071 actual_length: 131071 spi_transfer@ffffffd5a41576f8 len: 131071 tx_buf: ffffffd5a4340ffc Note that rx_offset > 3 can only occur if the SPI controller driver sets ->dma_alignment to a higher value than 4, so most SPI controller drivers are not affect. The allocated Rx buffer is of size SPI_TEST_MAX_SIZE_PLUS, which is 132 KiB (assuming 4 KiB pages). This test uses an initial offset into the rx_buf of PAGE_SIZE - 4, and a len of 131071, so the range expected to be written in this transfer ends at (4096 - 4) + 5 + 131071 == 132 KiB, which is also the end of the allocated buffer. But the code which verifies the content of the buffer reads a byte beyond the allocated buffer and spuriously fails because this out-of-bounds read doesn't return the expected value. Fix this by using ITERATE_LEN instead of ITERATE_MAX_LEN to avoid testing sizes which cause out-of-bounds reads. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20200902132341.7079-1-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-02regulator: pwm: Fix machine constraints applicationVincent Whitchurch
If the zero duty cycle doesn't correspond to any voltage in the voltage table, the PWM regulator returns an -EINVAL from get_voltage_sel() which results in the core erroring out with a "failed to get the current voltage" and ending up not applying the machine constraints. Instead, return -ENOTRECOVERABLE which makes the core set the voltage since it's at an unknown value. For example, with this device tree: fooregulator { compatible = "pwm-regulator"; pwms = <&foopwm 0 100000>; regulator-min-microvolt = <2250000>; regulator-max-microvolt = <2250000>; regulator-name = "fooregulator"; regulator-always-on; regulator-boot-on; voltage-table = <2250000 30>; }; Before this patch: fooregulator: failed to get the current voltage(-22) After this patch: fooregulator: Setting 2250000-2250000uV fooregulator: 2250 mV Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20200902130952.24880-1-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-02dm thin metadata: Fix use-after-free in dm_bm_set_read_onlyYe Bin
The following error ocurred when testing disk online/offline: [ 301.798344] device-mapper: thin: 253:5: aborting current metadata transaction [ 301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction [ 301.849206] Aborting journal on device dm-26-8. [ 301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted [ 301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30 [ 301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data] Reason is: metadata_operation_failed abort_transaction dm_pool_abort_metadata __create_persistent_data_objects r = __open_or_format_metadata if (r) --> If failed will free pmd->bm but pmd->bm not set NULL dm_block_manager_destroy(pmd->bm); set_pool_mode dm_pool_metadata_read_only(pool->pmd); dm_bm_set_read_only(pmd->bm); --> use-after-free Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and dm_bm_set_read_write functions. If bm is NULL it means creating the bm failed and so dm_bm_is_read_only must return true. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-02dm thin metadata: Avoid returning cmd->bm wild pointer on errorYe Bin
Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-02dm cache metadata: Avoid returning cmd->bm wild pointer on errorYe Bin
Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-02libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to SandisksTejun Heo
All three generations of Sandisk SSDs lock up hard intermittently. Experiments showed that disabling NCQ lowered the failure rate significantly and the kernel has been disabling NCQ for some models of SD7's and 8's, which is obviously undesirable. Karthik worked with Sandisk to root cause the hard lockups to trim commands larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which limits max trim size to 128M and applies it to all three generations of Sandisk SSDs. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Karthik Shivaram <karthikgs@fb.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-02drm/i915: Clear the repeater bit on HDCP disableSean Paul
On HDCP disable, clear the repeater bit. This ensures if we connect a non-repeater sink after a repeater, the bit is in the state we expect. Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.17+ Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-3-sean@poorly.run (cherry picked from commit 2cc0c7b520bf8ea20ec42285d4e3d37b467eb7f9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-09-02drm/i915: Fix sha_text population codeSean Paul
This patch fixes a few bugs: 1- We weren't taking into account sha_leftovers when adding multiple ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with the beginning of ksv[j] 2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was being placed on the wrong half of sha_text, overlapping the leftover ksv value 3- In the sha_leftovers == 2 case, we need to manually terminate the byte stream with 0x80 since the hardware doesn't have enough room to add it after writing M0 The upside is that all of the HDCP supported HDMI repeaters I could find on Amazon just strip HDCP anyways, so it turns out to be _really_ hard to hit any of these cases without an MST hub, which is not (yet) supported. Oh, and the sha_leftovers == 1 case works perfectly! Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.17+ Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-2-sean@poorly.run (cherry picked from commit 1f0882214fd0037b74f245d9be75c31516fed040) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-09-02drm/i915/display: Ensure that ret is always initialized in ↵Nathan Chancellor
icl_combo_phy_verify_state Clang warns: drivers/gpu/drm/i915/display/intel_combo_phy.c:268:3: warning: variable 'ret' is uninitialized when used here [-Wuninitialized] ret &= check_phy_reg(dev_priv, phy, ICL_PORT_TX_DW8_LN0(phy), ^~~ drivers/gpu/drm/i915/display/intel_combo_phy.c:261:10: note: initialize the variable 'ret' to silence this warning bool ret; ^ = 0 1 warning generated. In practice, the bug this warning appears to be concerned with would not actually matter because ret gets initialized to the return value of cnl_verify_procmon_ref_values. However, that does appear to be a bug since it means the first hunk of the patch this fixes won't actually do anything (since the values of check_phy_reg won't factor into the final ret value). Initialize ret to true then make all of the assignments a bitwise AND with itself so that the function always does what it should do. Fixes: 239bef676d8e ("drm/i915/display: Implement new combo phy initialization step") Link: https://github.com/ClangBuiltLinux/linux/issues/1094 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200828202830.7165-1-jose.souza@intel.com Signed-off-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 2034c2129bc4a91d471815d4dc7a2a69eaa5338d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-09-02drm/virtio: fix unblankGerd Hoffmann
When going through a disable/enable cycle without changing the framebuffer the optimization added by commit 3954ff10e06e ("drm/virtio: skip set_scanout if framebuffer didn't change") causes the screen stay blank. Add a bool to force an update to fix that. v2: use drm_atomic_crtc_needs_modeset() (Daniel). Cc: 1882851@bugs.launchpad.net Fixes: 3954ff10e06e ("drm/virtio: skip set_scanout if framebuffer didn't change") Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Jiri Slaby <jirislaby@kernel.org> Tested-by: Diego Viola <diego.viola@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20200818072511.6745-2-kraxel@redhat.com (cherry picked from commit 1bc371cd0ec907bab870cacb6e898105f9c41dc8)
2020-09-01scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATALuo Jiaxing
It was discovered that sdparm will fail when attempting to disable write cache on a SATA disk connected via libsas. In the ATA command set the write cache state is controlled through the SET FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and the latter command is what is used in the SCSI-ATA translation layer. A subtle difference is that a MODE SELECT carries data whereas SET FEATURES is defined as a non-data command in ATA. Set the DMA data direction to DMA_NONE if the requested ATA command is identified as non-data. [mkp: commit desc] Fixes: fa1c1e8f1ece ("[SCSI] Add SATA support to libsas") Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-01scsi: target: iscsi: Fix data digest calculationVarun Prakash
Current code does not consider 'page_off' in data digest calculation. To fix this, add a local variable 'first_sg' and set first_sg.offset to sg->offset + page_off. Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Christie <michael.christie@oralce.com> Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-01net: usb: dm9601: Add USB ID of Keenetic Plus DSLKamil Lorenc
Keenetic Plus DSL is a xDSL modem that uses dm9620 as its USB interface. Signed-off-by: Kamil Lorenc <kamil@re-ws.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01vhost: fix typo in error messageYunsheng Lin
"enable" should be "disable" when the function name is vhost_disable_notify(), which does the disabling work. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three minor fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_debug: Remove superfluous close zone in resp_open_zone() scsi: libcxgbi: Fix a use after free in cxgbi_conn_xmit_pdu() scsi: qedf: Fix null ptr reference in qedf_stag_change_work
2020-09-01dm integrity: fix error reporting in bitmap mode after creationMikulas Patocka
The dm-integrity target did not report errors in bitmap mode just after creation. The reason is that the function integrity_recalc didn't clean up ic->recalc_bitmap as it proceeded with recalculation. Fix this by updating the bitmap accordingly -- the double shift serves to rounddown. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-01dm crypt: Initialize crypto wait structuresDamien Le Moal
Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto wait structures declared on stack before their use with crypto_wait_req(). Fixes: 39d13a1ac41d ("dm crypt: reuse eboiv skcipher for IV generation") Fixes: bbb1658461ac ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-01dm mpath: fix racey management of PG initializationMike Snitzer
Commit 935fcc56abc3 ("dm mpath: only flush workqueue when needed") changed flush_multipath_work() to avoid needless workqueue flushing (of a multipath global workqueue). But that change didn't realize the surrounding flush_multipath_work() code should also only run if 'pg_init_in_progress' is set. Fix this by only doing all of flush_multipath_work()'s PG init related work if 'pg_init_in_progress' is set. Otherwise multipath_wait_for_pg_init_completion() will run unconditionally but the preceeding flush_workqueue(kmpath_handlerd) may not. This could lead to deadlock (though only if kmpath_handlerd never runs a corresponding work to decrement 'pg_init_in_progress'). It could also be, though highly unlikely, that the kmpath_handlerd work that does PG init completes before 'pg_init_in_progress' is set, and then an intervening DM table reload's multipath_postsuspend() triggers flush_multipath_work(). Fixes: 935fcc56abc3 ("dm mpath: only flush workqueue when needed") Cc: stable@vger.kernel.org Reported-by: Ben Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-01dm writecache: handle DAX to partitions on persistent memory correctlyMikulas Patocka
The function dax_direct_access doesn't take partitions into account, it always maps pages from the beginning of the device. Therefore, persistent_memory_claim() must get the partition offset using get_start_sect() and add it to the page offsets passed to dax_direct_access(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 48debafe4f2f ("dm: add writecache target") Cc: stable@vger.kernel.org # 4.18+ Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-01net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()Shung-Hsi Yu
On machines with much memory (> 2 TByte) and log_mtts_per_seg == 0, a max_order of 31 will be passed to mlx_buddy_init(), which results in s = BITS_TO_LONGS(1 << 31) becoming a negative value, leading to kvmalloc_array() failure when it is converted to size_t. mlx4_core 0000:b1:00.0: Failed to initialize memory region table, aborting mlx4_core: probe of 0000:b1:00.0 failed with error -12 Fix this issue by changing the left shifting operand from a signed literal to an unsigned one. Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabledFrancisco Jerez
This fixes the behavior of the scaling_max_freq and scaling_min_freq sysfs files in systems which had turbo disabled by the BIOS. Caleb noticed that the HWP is programmed to operate in the wrong P-state range on his system when the CPUFREQ policy min/max frequency is set via sysfs. This seems to be because in his system intel_pstate_get_hwp_max() is returning the maximum turbo P-state even though turbo was disabled by the BIOS, which causes intel_pstate to scale kHz frequencies incorrectly e.g. setting the maximum turbo frequency whenever the maximum guaranteed frequency is requested via sysfs. Tested-by: Caleb Callaway <caleb.callaway@intel.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Minor subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-01cpufreq: intel_pstate: Free memory only when turning offRafael J. Wysocki
When intel_pstate switches the operation mode from "active" to "passive" or the other way around, freeing its data structures representing CPUs and allocating them again from scratch is not necessary and wasteful. Moreover, if these data structures are preserved, the cached HWP Request MSR value from there may be written to the MSR to start with to reinitialize it and help to restore the EPP value set previously (it is set to 0xFF when CPUs go offline to allow their SMT siblings to use the full range of EPP values and that also happens when the driver gets unregistered). Accordingly, modify the driver to only do a full cleanup on driver object registration errors and when its status is changed to "off" via sysfs and to write the cached HWP Request MSR value back to the MSR on CPU init if the data structure representing the given CPU is still there. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-09-01cpufreq: intel_pstate: Add ->offline and ->online callbacksRafael J. Wysocki
Add ->offline and ->online driver callbacks to prepare for taking a CPU offline and to restore its working configuration when it goes back online, respectively, to avoid invoking the ->init callback on every CPU online which is quite a bit of unnecessary overhead. Define ->offline and ->online so that they can be used in the passive mode as well as in the active mode and because ->offline will do the majority of ->stop_cpu work, the passive mode does not need that callback any more, so drop it from there. Also modify the active mode ->suspend and ->resume callbacks to prevent them from interfering with the new ->offline and ->online ones in case the latter are invoked withing the system-wide suspend and resume code flow and make the passive mode use them too. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-09-01cpufreq: intel_pstate: Tweak the EPP sysfs interfaceRafael J. Wysocki
Modify the EPP sysfs interface to reject attempts to change the EPP to values different from 0 ("performance") in the active mode with the "performance" policy (ie. scaling_governor set to "performance"), to avoid situations in which the kernel appears to discard data passed to it via the EPP sysfs attribute. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-09-01cpufreq: intel_pstate: Update cached EPP in the active modeRafael J. Wysocki
Make intel_pstate update the cached EPP value when setting the EPP via sysfs in the active mode just like it is the case in the passive mode, for consistency, but also for the benefit of subsequent changes. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-09-01cpufreq: intel_pstate: Refuse to turn off with HWP enabledRafael J. Wysocki
After commit f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive mode with HWP enabled") it is possible to change the driver status to "off" via sysfs with HWP enabled, which effectively causes the driver to unregister itself, but HWP remains active and it forces the minimum performance, so even if another cpufreq driver is loaded, it will not be able to control the CPU frequency. For this reason, make the driver refuse to change the status to "off" with HWP enabled. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-09-01Merge branch 'opp/fixes' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework fixes for 5.9-rc4 from Viresh Kumar: "This fixes reference counting for OPP tables. Few patches are getting queued (for various subsystems) for 5.10 which depend on this to be fixed first." * 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Don't drop reference for an OPP table that was never parsed
2020-09-01iio: adc: mcp3422: fix locking on error pathAngelo Compagnucci
Reading from the chip should be unlocked on error path else the lock could never being released. Fixes: 07914c84ba30 ("iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADC") Fixes: 3f1093d83d71 ("iio: adc: mcp3422: fix locking scope") Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com> Link: https://lore.kernel.org/r/20200901093218.1500845-1-angelo.compagnucci@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-01regulator: core: Fix slab-out-of-bounds in regulator_unlock_recursive()Dmitry Osipenko
The recent commit 7d8196641ee1 ("regulator: Remove pointer table overallocation") changed the size of coupled_rdevs and now KASAN is able to detect slab-out-of-bounds problem in regulator_unlock_recursive(), which is a legit problem caused by a typo in the code. The recursive unlock function uses n_coupled value of a parent regulator for unlocking supply regulator, while supply's n_coupled should be used. In practice problem may only affect platforms that use coupled regulators. Cc: stable@vger.kernel.org # 5.0+ Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200831204335.19489-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-01HID: core: Sanitize event code and type when mapping inputMarc Zyngier
When calling into hid_map_usage(), the passed event code is blindly stored as is, even if it doesn't fit in the associated bitmap. This event code can come from a variety of sources, including devices masquerading as input devices, only a bit more "programmable". Instead of taking the event code at face value, check that it actually fits the corresponding bitmap, and if it doesn't: - spit out a warning so that we know which device is acting up - NULLify the bitmap pointer so that we catch unexpected uses Code paths that can make use of untrusted inputs can now check that the mapping was indeed correct and bail out if not. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
2020-09-01HID: core: Correctly handle ReportSize being zeroMarc Zyngier
It appears that a ReportSize value of zero is legal, even if a bit non-sensical. Most of the HID code seems to handle that gracefully, except when computing the total size in bytes. When fed as input to memset, this leads to some funky outcomes. Detect the corner case and correctly compute the size. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
2020-09-01misc: eeprom: at24: register nvmem only after eeprom is ready to useVadym Kochan
During nvmem_register() the nvmem core sends notifications when: - cell added - nvmem added and during these notifications some callback func may access the nvmem device, which will fail in case of at24 eeprom because regulator and pm are enabled after nvmem_register(). Fixes: cd5676db0574 ("misc: eeprom: at24: support pm_runtime control") Fixes: b20eb4c1f026 ("eeprom: at24: drop unnecessary label") Cc: stable@vger.kernel.org Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-01Merge tag 'thunderbolt-for-v5.9-rc4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fixes for v5.9-rc4 This includes two fixes, one that fixes a regression around reboot and other that uses a correct link rate when USB3 bandwidth is reclaimed when the link is not up. Both have been in linux-next with no reported issues. * tag 'thunderbolt-for-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Use maximum USB3 link rate when reclaiming if link is not up thunderbolt: Disable ports that are not implemented
2020-09-01HID: elan: Fix memleak in elan_input_configuredDinghao Liu
When input_mt_init_slots() fails, input should be freed to prevent memleak. When input_register_device() fails, we should call input_mt_destroy_slots() to free memory allocated by input_mt_init_slots(). Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-08-31scsi: lpfc: Update lpfc version to 12.8.0.4James Smart
Update lpfc version to 12.8.0.4 Link: https://lore.kernel.org/r/20200828175332.130300-5-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional eventsJames Smart
Currently the driver registers for Link Integrity events only. This patch adds registration for the following FPIN types: - Delivery Notifications - Congestion Notification - Peer Congestion Notification Link: https://lore.kernel.org/r/20200828175332.130300-4-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discoveryJames Smart
The driver is unable to successfully login with remote device. During pt2pt login, the driver completes its FLOGI request with the remote device having WWN precedence. The remote device issues its own (delayed) FLOGI after accepting the driver's and, upon transmitting the FLOGI, immediately recognizes it has already processed the driver's FLOGI thus it transitions to sending a PLOGI before waiting for an ACC to its FLOGI. In the driver, the FLOGI is received and an ACC sent, followed by the PLOGI being received and an ACC sent. The issue is that the PLOGI reception occurs before the response from the adapter from the FLOGI ACC is received. Processing of the PLOGI sets state flags to perform the REG_RPI mailbox command and proceed with the rest of discovery on the port. The same completion routine used by both FLOGI and PLOGI is generic in nature. One of the things it does is clear flags, and those flags happen to drive the rest of discovery. So what happened was the PLOGI processing set the flags, the FLOGI ACC completion cleared them, thus when the PLOGI ACC completes it doesn't see the flags and stops. Fix by modifying the generic completion routine to not clear the rest of discovery flag (NLP_ACC_REGLOGIN) unless the completion is also associated with performing a mailbox command as part of its handling. For things such as FLOGI ACC, there isn't a subsequent action to perform with the adapter, thus there is no mailbox cmd ptr. PLOGI ACC though will perform REG_RPI upon completion, thus there is a mailbox cmd ptr. Link: https://lore.kernel.org/r/20200828175332.130300-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: lpfc: Fix setting IRQ affinity with an empty CPU maskJames Smart
Some systems are reporting the following log message during driver unload or system shutdown: ics_rtas_set_affinity: No online cpus in the mask A prior commit introduced the writing of an empty affinity mask in calls to irq_set_affinity_hint() when disabling interrupts or when there are no remaining online CPUs to service an eq interrupt. At least some ppc64 systems are checking whether affinity masks are empty or not. Do not call irq_set_affinity_hint() with an empty CPU mask. Fixes: dcaa21367938 ("scsi: lpfc: Change default IRQ model on AMD architectures") Link: https://lore.kernel.org/r/20200828175332.130300-2-james.smart@broadcom.com Cc: <stable@vger.kernel.org> # v5.5+ Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: qla2xxx: Fix regression on sparc64René Rebe
Commit 98aee70d19a7 ("qla2xxx: Add endianizer to max_payload_size modifier.") in 2014 broke qla2xxx on sparc64, e.g. as in the Sun Blade 1000 / 2000. Unbreak by partial revert to fix endianness in nvram firmware default initialization. Also mark the second frame_payload_size in nvram_t __le16 to avoid new sparse warnings. Link: https://lore.kernel.org/r/20200827.222729.1875148247374704975.rene@exactcode.com Fixes: 98aee70d19a7 ("qla2xxx: Add endianizer to max_payload_size modifier.") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Arun Easi <aeasi@marvell.com> Signed-off-by: René Rebe <rene@exactcode.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: libfc: Fix for double free()Javed Hasan
Fix for '&fp->skb' double free. Link: https://lore.kernel.org/r/20200825093940.19612-1-jhasan@marvell.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abortDinghao Liu
When pm8001_tag_alloc() fails, task should be freed just like it is done in the subsequent error paths. Link: https://lore.kernel.org/r/20200823091453.4782-1-dinghao.liu@zju.edu.cn Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-11 16:38:14 +0000