Age | Commit message (Collapse) | Author |
|
This bit is necessary to receive packets from the internal PHY.
Without this bit set, no activity occurs on the interface.
Normally u-boot sets this bit, but if u-boot is compiled without
net support, the interface will be up but without any activity.
If bit is set once, it will work until the IP is powered down or reset.
The vendor SDK sets this bit along with the PHY_ID bits.
Signed-off-by: Da Xue <da@libre.computer>
Fixes: 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support")
Link: https://patch.msgid.link/20250425192009.1439508-1-da@libre.computer
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As it's name suggests, parse_eeprom() parses EEPROM data.
This is done by reading data, 16 bits at a time as follows:
for (i = 0; i < 128; i++)
((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));
sromdata is at the same memory location as psrom.
And the type of psrom is a pointer to struct t_SROM.
As can be seen in the loop above, data is stored in sromdata, and thus psrom,
as 16-bit little-endian values.
However, the integer fields of t_SROM are host byte order integers.
And in the case of led_mode this leads to a little endian value
being incorrectly treated as host byte order.
Looking at rio_set_led_mode, this does appear to be a bug as that code
masks led_mode with 0x1, 0x2 and 0x8. Logic that would be effected by a
reversed byte order.
This problem would only manifest on big endian hosts.
Found by inspection while investigating a sparse warning
regarding the crc field of t_SROM.
I believe that warning is a false positive. And although I plan
to send a follow-up to use little-endian types for other the integer
fields of PSROM_t I do not believe that will involve any bug fixes.
Compile tested only.
Fixes: c3f45d322cbd ("dl2k: Add support for IP1000A-based cards")
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250425-dlink-led-mode-v1-1-6bae3c36e736@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Fixes and new HW support
- amd/pmc: Require at least 2.5 seconds between HW sleep cycles
- alienware-wmi-wmax:
- Add support for Alienware m15 R7
- Fix error handling to avoid uninitialized variable
- asus-wmi: Disable OOBE state also on resume
- ideapad-laptop: Support a few new buttons
- intel/hid: Add Panther Lake support
- intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug"
* tag 'platform-drivers-x86-v6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ideapad-laptop: add support for some new buttons
platform/x86: asus-wmi: Disable OOBE state after resume from hibernation
platform/x86: alienware-wmi-wmax: Add support for Alienware m15 R7
platform/x86/intel: hid: Add Pantherlake support
platform/x86: alienware-wmi-wmax: Fix uninitialized variable due to bad error handling
platform/x86/intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug
platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles
|
|
On r6x2b6x2g6x2 displays not enough blank data is sent to blank the
entire screen. When support for these displays was added, the dirty
function was updated to handle the different amount of data, but
blanking was not, and remained hardcoded as 2 bytes per pixel.
This change applies almost the same algorithm used in the dirty function
to the blank function, but there is no fb available at that point, and
no concern about having to transform any data, so the dbidev pixel
format is always used for calculating the length.
Fixes: 4aebb79021f3 ("drm/mipi-dbi: Add support for DRM_FORMAT_RGB888")
Signed-off-by: Russell Cloran <rcloran@gmail.com>
Link: https://lore.kernel.org/r/20250415053259.79572-1-rcloran@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The drm_gem_shmem_test_get_pages_sgt() gets a scatter-gather table using
the drm_gem_shmem_get_sg_table() function and rightfully calls
sg_free_table() on it. However, it's also supposed to kfree() the
returned sg_table, but doesn't.
This leads to a memory leak, reported by kmemleak. Fix it by adding a
kunit action to kfree the sgt when the test ends.
Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 93032ae634d4 ("drm/test: add a test suite for GEM objects backed by shmem")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250408140758.1831333-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add two quirks for the WDC Blue SN550 (PCI ID 15b7:5009) based on user
reports and hardware analysis:
- NVME_QUIRK_NO_DEEPEST_PS:
liaozw talked to me the problem and solved with
nvme_core.default_ps_max_latency_us=0, so add the quirk.
I also found some reports in the following link.
- NVME_QUIRK_BROKEN_MSI:
after get the lspci from Jack Rio.
I think that the disk also have NVME_QUIRK_BROKEN_MSI.
described in commit d5887dc6b6c0 ("nvme-pci: Add quirk for broken MSIs")
as sean said in link which match the MSI 1/32 and MSI-X 17.
Log:
lspci -nn | grep -i memory
03:00.0 Non-Volatile memory controller [0108]: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) [15b7:5009] (rev 01)
lspci -v -d 15b7:5009
03:00.0 Non-Volatile memory controller: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) (rev 01) (prog-if 02 [NVM Express])
Subsystem: Sandisk Corp WD Blue SN550 NVMe SSD
Flags: bus master, fast devsel, latency 0, IRQ 35, IOMMU group 10
Memory at fe800000 (64-bit, non-prefetchable) [size=16K]
Memory at fe804000 (64-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [b0] MSI-X: Enable+ Count=17 Masked-
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [1b8] Latency Tolerance Reporting
Capabilities: [300] Secondary PCI Express
Capabilities: [900] L1 PM Substates
Kernel driver in use: nvme
dmesg | grep nvme
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE=
[ 0.059301] Kernel command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE=
[ 0.542430] nvme nvme0: pci function 0000:03:00.0
[ 0.560426] nvme nvme0: allocated 32 MiB host memory buffer.
[ 0.562491] nvme nvme0: 16/0/0 default/read/poll queues
[ 0.567764] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 6.388726] EXT4-fs (nvme0n1p7): mounted filesystem ro with ordered data mode. Quota mode: none.
[ 6.893421] EXT4-fs (nvme0n1p7): re-mounted r/w. Quota mode: none.
[ 7.125419] Adding 16777212k swap on /dev/nvme0n1p8. Priority:-2 extents:1 across:16777212k SS
[ 7.157588] EXT4-fs (nvme0n1p6): mounted filesystem r/w with ordered data mode. Quota mode: none.
[ 7.165021] EXT4-fs (nvme0n1p9): mounted filesystem r/w with ordered data mode. Quota mode: none.
[ 8.036932] nvme nvme0: using unchecked data buffer
[ 8.096023] block nvme0n1: No UUID available providing old NGUID
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d5887dc6b6c054d0da3cd053afc15b7be1f45ff6
Link: https://lore.kernel.org/all/20240422162822.3539156-1-sean.anderson@linux.dev/
Reported-by: liaozw <hedgehog-002@163.com>
Closes: https://bbs.deepin.org.cn/post/286300
Reported-by: rugk <rugk+github@posteo.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=208123
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for
device [126f:1001].
It is similar to commit e89086c43f05 ("drivers/nvme: Add quirks for
device 126f:2262")
Diff is according the dmesg, use NVME_QUIRK_IGNORE_DEV_SUBNQN.
dmesg | grep -i nvme0:
nvme nvme0: pci function 0000:01:00.0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: 12/0/0 default/read/poll queues
Link:https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e89086c43f0500bc7c4ce225495b73b8ce234c1f
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A zero return means the reset was successfully scheduled. We don't want
to unquiesce the queues while the reset_work is pending, as that will
just flush out requeued requests to a failed completion.
Fixes: 71a5bb153be104 ("nvme: ensure disabling pairs with unquiesce")
Reported-by: Dhankaran Singh Ajravat <dhankaran@meta.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
__ublk_check_and_get_req() is only called from ublk_check_and_get_req()
and ublk_register_io_buf(), the same check has been covered in the two
calling sites.
So remove the check from __ublk_check_and_get_req().
Suggested-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The simple check of UBLK_IO_FLAG_OWNED_BY_SRV can avoid incorrect
register/unregister io buffer easily, so check it before calling
starting to register/un-register io buffer.
Also only allow io buffer register/unregister uring_cmd in case of
UBLK_F_SUPPORT_ZERO_COPY.
Also mark argument 'ublk_queue *' of ublk_register_io_buf as const.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 1f6540e2aabb ("ublk: zc register/unregister bvec")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_USER_COPY and UBLK_F_SUPPORT_ZERO_COPY are two different
features, and shouldn't be coupled together.
Commit 1f6540e2aabb ("ublk: zc register/unregister bvec") enables
user copy automatically in case of UBLK_F_SUPPORT_ZERO_COPY, this way
isn't correct.
So decouple zero copy from user copy, and use independent helper to
check each one.
Fixes: 1f6540e2aabb ("ublk: zc register/unregister bvec")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On newer SoCs intr_target_bit position is at 8 instead of 5. Fix it.
Also add missing intr_wakeup_present_bit and intr_wakeup_enable_bit which
enables forwarding of GPIO interrupts to parent PDC interrupt controller.
Fixes: afe9803e3b82 ("pinctrl: qcom: Add sm8750 pinctrl driver")
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/20250429-pinctrl_sm8750-v2-1-87d45dd3bd82@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Deferred probe with pm_runtime_put() may delay clock disable, causing
incorrect clock usage count. Use pm_runtime_put_sync() to ensure the
clock is disabled immediately.
Fixes: 13d6eb20fc79 ("i2c: imx-lpi2c: add runtime pm support")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: <stable@vger.kernel.org> # v4.16+
Link: https://lore.kernel.org/r/20250421062341.2471922-1-carlos.song@nxp.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The list of registers to capture on a GPU hang includes some that
require steering. Unfortunately, the flag to say this was being wiped
to due a missing OR on the assignment of the next flag field.
Fix that.
Fixes: b170d696c1e2 ("drm/xe/guc: Add XE_LP steered register lists")
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Link: https://lore.kernel.org/r/20250417195215.3002210-2-John.C.Harrison@Intel.com
(cherry picked from commit 532da44b54a10d50ebad14a8a02bd0b78ec23e8b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
xe_svm_range_alloc() returns ERR_PTR(-ENOMEM) on failure and there is a
dereference of "range" after that:
--> range->gpusvm = gpusvm;
In xe_svm_range_alloc(), when memory allocation fails return NULL
instead to handle this situation.
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/adaef4dd-5866-48ca-bc22-4a1ddef20381@stanley.mountain/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250323124907.3946370-1-harshit.m.mogalapalli@oracle.com
(cherry picked from commit 7a0322122cfdd9a6f10fc7701023d75c98eb3d22)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The query_complete trace was not removed after ufshcd_issue_dev_cmd() was
called from the bsg path, resulting in duplicate output.
Below is an example of the trace:
ufs-utils-773 [000] ..... 218.176933: ufshcd_upiu: query_send: 0000:00:04.0: HDR:16 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ufs-utils-773 [000] ..... 218.177145: ufshcd_upiu: query_complete: 0000:00:04.0: HDR:36 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 08 00 00 00 00
ufs-utils-773 [000] ..... 218.177146: ufshcd_upiu: query_complete: 0000:00:04.0: HDR:36 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 08 00 00 00 00
Remove the redundant trace call in the bsg path, preventing duplication.
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20250425010605epcms2p67e89b351398832fe0fd547404d3afc65@epcms2p6
Fixes: 71aabb747d5f ("scsi: ufs: core: Reuse exec_dev_cmd")
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a spelling mistake in a dev_err() message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250422170347.66792-1-colin.i.king@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Split offloads into csum, tso and other offloads so that tunneled
packets do not by default have all the offloads enabled.
Stateless offloads for encapsulated packets are not yet supported in
firmware/software but in the driver we were setting the features same as
non encapsulated features.
Fixed naming to clarify CSUM bits are being checked for Tx.
Inherit netdev features to VLAN interfaces as well.
Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Zachary Goldstein <zachmgoldstein@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250425222636.3188441-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As mentioned in the commit baeb705fd6a7 ("ice: always check VF VSI
pointer values"), we need to perform a null pointer check on the return
value of ice_get_vf_vsi() before using it.
Fixes: 6ebbe97a4881 ("ice: Add a per-VF limit on number of FDIR filters")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250425222636.3188441-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Get Tx Topology AQ command (opcode 0x0418) has different read flag
requirements depending on the hardware/firmware. For E810, E822, and E823
firmware the read flag must be set, and for newer hardware (E825 and E830)
it must not be set.
This results in failure to configure Tx topology and the following warning
message during probe:
DDP package does not support Tx scheduling layers switching feature -
please update to the latest DDP package and try again
The current implementation only handles E825-C but not E830. It is
confusing as we first check ice_is_e825c() and then set the flag in the set
case. Finally, we check ice_is_e825c() again and set the flag for all other
hardware in both the set and get case.
Instead, notice that we always need the read flag for set, but only need
the read flag for get on E810, E822, and E823 firmware. Fix the logic to
check the MAC type and set the read flag in get only on the older devices
which require it.
Fixes: ba1124f58afd ("ice: Add E830 device IDs, MAC type and registers")
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250425222636.3188441-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A use-after-free error popped up in stress testing:
[Mon Apr 21 21:21:33 2025] BUG: KFENCE: use-after-free write in pdsc_auxbus_dev_del+0xef/0x160 [pds_core]
[Mon Apr 21 21:21:33 2025] Use-after-free write at 0x000000007013ecd1 (in kfence-#47):
[Mon Apr 21 21:21:33 2025] pdsc_auxbus_dev_del+0xef/0x160 [pds_core]
[Mon Apr 21 21:21:33 2025] pdsc_remove+0xc0/0x1b0 [pds_core]
[Mon Apr 21 21:21:33 2025] pci_device_remove+0x24/0x70
[Mon Apr 21 21:21:33 2025] device_release_driver_internal+0x11f/0x180
[Mon Apr 21 21:21:33 2025] driver_detach+0x45/0x80
[Mon Apr 21 21:21:33 2025] bus_remove_driver+0x83/0xe0
[Mon Apr 21 21:21:33 2025] pci_unregister_driver+0x1a/0x80
The actual device uninit usually happens on a separate thread
scheduled after this code runs, but there is no guarantee of order
of thread execution, so this could be a problem. There's no
actual need to clear the client_id at this point, so simply
remove the offending code.
Fixes: 10659034c622 ("pds_core: add the aux client API")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250425203857.71547-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btmtksdio: Check function enabled before doing close
- btmtksdio: Do close if SDIO card removed without close
- btusb: avoid NULL pointer dereference in skb_dequeue()
- btintel_pcie: Avoid redundant buffer allocation
- btintel_pcie: Add additional to checks to clear TX/RX paths
- hci_conn: Fix not setting conn_timeout for Broadcast Receiver
- hci_conn: Fix not setting timeout for BIG Create Sync
* tag 'for-net-2025-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: copy RX timestamp to new fragments
Bluetooth: btintel_pcie: Add additional to checks to clear TX/RX paths
Bluetooth: btmtksdio: Do close if SDIO card removed without close
Bluetooth: btmtksdio: Check function enabled before doing close
Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue()
Bluetooth: btintel_pcie: Avoid redundant buffer allocation
Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync
Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver
====================
Link: https://patch.msgid.link/20250425192412.1578759-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When removing the clock bits for clocks which aren't used by the
Ethernet driver their names should also have been removed from the
mtk_clks_source_name array.
Remove them now as enum mtk_clks_map needs to match the
mtk_clks_source_name array so the driver can make sure that all required
clocks are present and correctly name missing clocks.
Fixes: 887b1d1adb2e ("net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d075e706ff1cebc07f9ec666736d0b32782fd487.1745555321.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the XGMAC specification, enabling features such as Layer 3
and Layer 4 Packet Filtering, Split Header and Virtualized Network support
automatically selects the IPC Full Checksum Offload Engine on the receive
side.
When RX checksum offload is disabled, these dependent features must also
be disabled to prevent abnormal behavior caused by mismatched feature
dependencies.
Ensure that toggling RX checksum offload (disabling or enabling) properly
disables or enables all dependent features, maintaining consistent and
expected behavior in the network device.
Cc: stable@vger.kernel.org
Fixes: 1a510ccf5869 ("amd-xgbe: Add support for VXLAN offload capabilities")
Signed-off-by: Vishal Badole <Vishal.Badole@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250424130248.428865-1-Vishal.Badole@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- always update the array size in realloc_argv on success
- dm-integrity: fix a warning on invalid table line
- dm-bufio: don't schedule in atomic context
- Fix W=1 build with clang
* tag 'for-6.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: always update the array size in realloc_argv on success
dm-integrity: fix a warning on invalid table line
dm-bufio: don't schedule in atomic context
dm table: Fix W=1 build warning when mempool_needs_integrity is unused
|
|
Using "depends on" and "select" for the same Kconfig symbol is known to
cause circular dependencies (cmp. "Kconfig recursive dependency
limitations" in Documentation/kbuild/kconfig-language.rst.
DRM drivers are selecting drm helpers so do the same for
DRM_DEBUG_DP_MST_TOPOLOGY_REFS.
Fixes following circular dependency reported on x86 for the downstream
Asahi Linux tree:
error: recursive dependency detected!
symbol DRM_KMS_HELPER is selected by DRM_GEM_SHMEM_HELPER
symbol DRM_GEM_SHMEM_HELPER is selected by RUST_DRM_GEM_SHMEM_HELPER
symbol RUST_DRM_GEM_SHMEM_HELPER is selected by DRM_ASAHI
symbol DRM_ASAHI depends on RUST
symbol RUST depends on CALL_PADDING
symbol CALL_PADDING depends on OBJTOOL
symbol OBJTOOL is selected by STACK_VALIDATION
symbol STACK_VALIDATION depends on UNWINDER_FRAME_POINTER
symbol UNWINDER_FRAME_POINTER is part of choice block at arch/x86/Kconfig.debug:224
symbol <choice> unknown is visible depending on UNWINDER_GUESS
symbol UNWINDER_GUESS prompt is visible depending on STACKDEPOT
symbol STACKDEPOT is selected by DRM_DEBUG_DP_MST_TOPOLOGY_REFS
symbol DRM_DEBUG_DP_MST_TOPOLOGY_REFS depends on DRM_KMS_HELPER
Fixes: 12a280c72868 ("drm/dp_mst: Add topology ref history tracking for debugging")
Cc: stable@vger.kernel.org
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250304-drm_debug_dp_mst_topo_kconfig-v1-1-e16fd152f258@jannau.net
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
Interrupt handlers run with interrupts disabled so it is not necessary
to protect them against reentrancy.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250428-drm_adp_fixes-v2-4-912e081e55d8@jannau.net
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
Calling drm_crtc_vblank_on() drm_crtc_helper_funcs' atomic_enable is
expected to enable vblank interrupts. It may have been avoided here to
due to drm_crtc_vblank_get()'s error behavior after
drm_crtc_vblank_reset(). With that fixed in the preceding change the
driver can call drm_crtc_vblank_on() from adp_crtc_atomic_enable().
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250428-drm_adp_fixes-v2-3-912e081e55d8@jannau.net
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
drm_crtc_vblank_get() may fail when it's called before
drm_crtc_vblank_on() on a resetted CRTC. This occurs in
drm_crtc_helper_funcs' atomic_flush() calls after
drm_atomic_helper_crtc_reset() for example directly after probe. Send
the vblank event directly in such cases. Avoids following warning in
the subsequent drm_crtc_vblank_put() call from the vblank irq handler as
below:
adp 228200000.display-pipe: [drm] drm_WARN_ON(atomic_read(&vblank->refcount) == 0)
WARNING: CPU: 5 PID: 1206 at drivers/gpu/drm/drm_vblank.c:1247 drm_vblank_put+0x158/0x170
...
Call trace:
drm_vblank_put+0x158/0x170 (P)
drm_crtc_vblank_put+0x24/0x38
adp_fe_irq+0xd8/0xe8 [adpdrm]
__handle_irq_event_percpu+0x94/0x318
handle_irq_event+0x54/0xd0
handle_fasteoi_irq+0xa8/0x240
handle_irq_desc+0x3c/0x68
generic_handle_domain_irq+0x24/0x40
Modifying `crtc->state->event` here is fine as crtc->mutex is locked by
the non-async atomic commit. In retrospect this looks so obvious that it
doesn't warrant a comment in the file.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250428-drm_adp_fixes-v2-2-912e081e55d8@jannau.net
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
The lock is used in the interrupt handler so use spin_lock_irqsave to
disable interrupts and avoid deadlocks with the irq handler.
Fixes: 332122eba628 ("drm: adp: Add Apple Display Pipe driver")
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250428-drm_adp_fixes-v2-1-912e081e55d8@jannau.net
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
If we unbind a driver from the PCI device with an active DRM client,
subsequent read of the fdinfo data associated with the file descriptor in
question will not end well.
Protect the path with a drm_dev_enter/exit() pair.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 3f09a0cd4ea3 ("drm: Add common fdinfo helper")
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250418162512.72324-1-tvrtko.ursulin@igalia.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Bug fixes for the Hyper-V driver and kvp_daemon
* tag 'hyperv-fixes-signed-20250427' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Fix bad ref to hv_synic_eventring_tail when CPU goes offline
tools/hv: update route parsing in kvp daemon
Drivers: hv: Fix bad pointer dereference in hv_get_partition_id
|
|
Commit 7491cdf46b5c ("cpufreq: Avoid using inconsistent policy->min and
policy->max") overlooked the fact that policy->min and policy->max were
accessed directly in cpufreq_frequency_table_target() and in the
functions called by it. Consequently, the changes made by that commit
led to problems with setting policy limits.
Address this by passing the target frequency limits to __resolve_freq()
and cpufreq_frequency_table_target() and propagating them to the
functions called by the latter.
Fixes: 7491cdf46b5c ("cpufreq: Avoid using inconsistent policy->min and policy->max")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Closes: https://lore.kernel.org/linux-pm/aAplED3IA_J0eZN0@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/5896780.DvuYhMxLoT@rjwysocki.net
|
|
When testing sun8i-ss with multi_v7_defconfig, all CBC algorithm fail crypto
selftests.
This is strange since on sunxi_defconfig, everything was ok.
The problem was in the IV setup loop which never run because sg_dma_len
was 0.
Fixes: 359e893e8af4 ("crypto: sun8i-ss - rework handling of IV")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Include crypto/utils.h to get crypto_memneq rather than relying
on random inclusions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Simplify multiple return statements by directly returning the boolean
expressions.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct idxd_wq **", but the returned type will be
"struct wq **". These are the same size allocation (pointer sized), but
the types don't match. Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace pm_runtime_get_sync() usage with pm_runtime_resume_and_get() to
simplify error handling.
This is recommended in the documentation of pm_runtime_get_sync():
/**
* pm_runtime_get_sync - Bump up usage counter of a device and resume it.
...
* Consider using pm_runtime_resume_and_get() instead of it, especially
* if its return value is checked by the caller, as this is likely to result
* in cleaner code.
...
*/
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add IS_ENABLED(CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG) checks before the
fallback counter updates to make sure the code is not included when
debugfs statistics support is not enabled.
Also, drop the existing ifdef guards, since 'struct sun8i_ce_alg_template'
is always defined, even with CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG disabled.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use crypto_skcipher_driver_name() helper from <crypto/skcipher.h>, instead
of accessing struct crypto_alg directly.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare():
1] If dma_map_sg() fails for areq->dst, the device driver would try to free
DMA memory it has not allocated in the first place. To fix this, on the
"theend_sgs" error path, call dma unmap only if the corresponding dma
map was successful.
2] If the dma_map_single() call for the IV fails, the device driver would
try to free an invalid DMA memory address on the "theend_iv" path:
------------[ cut here ]------------
DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address
WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90
Modules linked in: skcipher_example(O+)
CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT
Tainted: [O]=OOT_MODULE
Hardware name: OrangePi Zero2 (DT)
pc : check_unmap+0x123c/0x1b90
lr : check_unmap+0x123c/0x1b90
...
Call trace:
check_unmap+0x123c/0x1b90 (P)
debug_dma_unmap_page+0xac/0xc0
dma_unmap_page_attrs+0x1f4/0x5fc
sun8i_ce_cipher_do_one+0x1bd4/0x1f40
crypto_pump_work+0x334/0x6e0
kthread_worker_fn+0x21c/0x438
kthread+0x374/0x664
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
To fix this, check for !dma_mapping_error() before calling
dma_unmap_single() on the "theend_iv" path.
Fixes: 06f751b61329 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
realloc_argv() was only updating the array size if it was called with
old_argv already allocated. The first time it was called to create an
argv array, it would allocate the array but return the array size as
zero. dm_split_args() would think that it couldn't store any arguments
in the array and would call realloc_argv() again, causing it to
reallocate the initial slots (this time using GPF_KERNEL) and finally
return a size. Aside from being wasteful, this could cause deadlocks on
targets that need to process messages without starting new IO. Instead,
realloc_argv should always update the allocated array size on success.
Fixes: a0651926553c ("dm table: don't copy from a NULL pointer in realloc_argv()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
On the Lenovo ThinkPad X201, when Intel VT-d is enabled in the BIOS, the
kernel boots with errors related to DMAR, the graphical interface appeared
quite choppy, and the system resets erratically within a minute after it
booted:
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:02.0] fault addr 0xb97ff000
[fault reason 0x05] PTE Write access is not set
Upon comparing boot logs with VT-d on/off, I found that the Intel Calpella
quirk (`quirk_calpella_no_shadow_gtt()') correctly applied the igfx IOMMU
disable/quirk correctly:
pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU
for graphics
Whereas with VT-d on, it went into the "else" branch, which then
triggered the DMAR handling fault above:
... else if (!disable_igfx_iommu) {
/* we have to ensure the gfx device is idle before we flush */
pci_info(dev, "Disabling batched IOTLB flush on Ironlake\n");
iommu_set_dma_strict();
}
Now, this is not exactly scientific, but moving 0x0044 to quirk_iommu_igfx
seems to have fixed the aforementioned issue. Running a few `git blame'
runs on the function, I have found that the quirk was originally
introduced as a fix specific to ThinkPad X201:
commit 9eecabcb9a92 ("intel-iommu: Abort IOMMU setup for igfx if BIOS gave
no shadow GTT space")
Which was later revised twice to the "else" branch we saw above:
- 2011: commit 6fbcfb3e467a ("intel-iommu: Workaround IOTLB hang on
Ironlake GPU")
- 2024: commit ba00196ca41c ("iommu/vt-d: Decouple igfx_off from graphic
identity mapping")
I'm uncertain whether further testings on this particular laptops were
done in 2011 and (honestly I'm not sure) 2024, but I would be happy to do
some distro-specific testing if that's what would be required to verify
this patch.
P.S., I also see IDs 0x0040, 0x0062, and 0x006a listed under the same
`quirk_calpella_no_shadow_gtt()' quirk, but I'm not sure how similar these
chipsets are (if they share the same issue with VT-d or even, indeed, if
this issue is specific to a bug in the Lenovo BIOS). With regards to
0x0062, it seems to be a Centrino wireless card, but not a chipset?
I have also listed a couple (distro and kernel) bug reports below as
references (some of them are from 7-8 years ago!), as they seem to be
similar issue found on different Westmere/Ironlake, Haswell, and Broadwell
hardware setups.
Cc: stable@vger.kernel.org
Fixes: 6fbcfb3e467a ("intel-iommu: Workaround IOTLB hang on Ironlake GPU")
Fixes: ba00196ca41c ("iommu/vt-d: Decouple igfx_off from graphic identity mapping")
Link: https://groups.google.com/g/qubes-users/c/4NP4goUds2c?pli=1
Link: https://bugs.archlinux.org/task/65362
Link: https://bbs.archlinux.org/viewtopic.php?id=230323
Reported-by: Wenhao Sun <weiguangtwk@outlook.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=197029
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://lore.kernel.org/r/20250415133330.12528-1-jeffbai@aosc.io
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Mask DDR and SDMMC in probe function to avoid spurious interrupts before
registration. Removed invalid register write to system manager.
Fixes: 1166fde93d5b ("EDAC, altera: Add Arria10 ECC memory init functions")
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/20250425142640.33125-3-matthew.gerlach@altera.com
|
|
Test correct structure member, ecc_cecnt_offset, before using it.
[ bp: Massage commit message. ]
Fixes: 73bcc942f427 ("EDAC, altera: Add Arria10 EDAC support")
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/20250425142640.33125-2-matthew.gerlach@altera.com
|
|
fix the below warning messages:
ttm/ttm_bo.c:1098: warning: Function parameter or struct member 'hit_low' not described in 'ttm_bo_swapout_walk'
ttm/ttm_bo.c:1098: warning: Function parameter or struct member 'evict_low' not described in 'ttm_bo_swapout_walk'
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250423042442.762108-1-sunil.khatri@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- When releasing a start-aligned resource, e.g., a bridge window, save
start/end/flags for the next assignment attempt; fixes a v6.15-rc1
regression (Ilpo Järvinen)
- Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
selftest v6.15-rc1 regression (Ilpo Järvinen)
- Add Manivannan Sadhasivam as maintainer of native host bridge and
endpoint drivers (Manivannan Sadhasivam)
- In endpoint test driver, defer IRQ allocation from .probe() until
ioctl() to fix a regression on platforms where the Vendor/Device ID
match doesn't include driver_data (Niklas Cassel)
* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
selftests/pcie_bwctrl: Fix test progs list
PCI: Restore assigned resources fully after release
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix crashes in the gic-v2m irqchip driver, caused by an incorrect
__init annotation"
* tag 'irq-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode()
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu, with some exynos cleanups and a
couple of minor fixes, seems a bit quiet, but probably some lag from
Easter holidays.
amdgpu:
- P2P DMA fixes
- Display reset fixes
- DCN 3.5 fixes
- ACPI EDID fix
- LTTPR fix
- mode_valid() fix
exynos:
- fix spelling error
- remove redundant error handling in exynos_drm_vidi.c module
- marks struct decon_data as const in the exynos7_drm_decon driver
since it is only read
- Remove unnecessary checking in exynos_drm_drv.c module
meson:
- Fix VCLK calculation
panel:
- jd9365a: Fix reset polarity"
* tag 'drm-fixes-2025-04-26' of https://gitlab.freedesktop.org/drm/kernel:
drm/exynos: Fix spelling mistake "enqueu" -> "enqueue"
drm/exynos: exynos7_drm_decon: Consstify struct decon_data
drm/exynos: fixed a spelling error
drm/exynos/vidi: Remove redundant error handling in vidi_get_modes()
drm/exynos: Remove unnecessary checking
drm/amd/display: do not copy invalid CRTC timing info
drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF
drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinks
drm/amd/display: Fix ACPI edid parsing on some Lenovo systems
drm/amdgpu: Allow P2P access through XGMI
drm/amd/display: Enable urgent latency adjustment on DCN35
drm/amd/display: Force full update in gpu reset
drm/amd/display: Fix gpu reset in multidisplay config
drm/amdgpu: Don't pin VRAM without DMABUF_MOVE_NOTIFY
drm/amdgpu: Use allowed_domains for pinning dmabufs
drm: panel: jd9365da: fix reset signal polarity in unprepare
drm/meson: use unsigned long long / Hz for frequency types
Revert "drm/meson: vclk: fix calculation of 59.94 fractional rates"
|
|
With ACPI in place, gicv2m_get_fwnode() is registered with the pci
subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime
during a PCI host bridge probe. But, the call back is wrongly marked as
__init, causing it to be freed, while being registered with the PCI
subsystem and could trigger:
Unable to handle kernel paging request at virtual address ffff8000816c0400
gicv2m_get_fwnode+0x0/0x58 (P)
pci_set_bus_msi_domain+0x74/0x88
pci_register_host_bridge+0x194/0x548
This is easily reproducible on a Juno board with ACPI boot.
Retain the function for later use.
Fixes: 0644b3daca28 ("irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
|