summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-06-23PCI: epf-test: Simplify DMA support checksDamien Le Moal
There is no need to have each read, write and copy test functions check for the FLAG_USE_DMA flag against the DMA support status indicated by epf_test->dma_supported. Move this test to the command handler function pci_epf_test_cmd_handler() to check once for all cases. Link: https://lore.kernel.org/r/20230415023542.77601-13-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Cleanup request result handlingDamien Le Moal
Each of the test functions pci_epf_test_write(), pci_epf_test_read() and pci_epf_test_copy() return an int result which is used by pci_epf_test_cmd_handler() to set a success or error bit in the request status. In the spirit of keeping the processing of each test case self-contained within its own test function, move the request status field update from pci_epf_test_cmd_handler() to each of these test functions and change these functions declaration to returning void. Link: https://lore.kernel.org/r/20230415023542.77601-12-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Cleanup pci_epf_test_cmd_handler()Damien Le Moal
Command codes are never combined together as flags into a single value. Thus we can replace the series of "if" tests in pci_epf_test_cmd_handler() with a cleaner switch-case statement. This also allows checking that we got a valid command and print an error message if we did not. Link: https://lore.kernel.org/r/20230415023542.77601-11-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Improve handling of command and status registersDamien Le Moal
The pci-epf-test driver uses the test register BAR memory directly to get and execute a test registers set by the RC side and defined using a struct pci_epf_test_reg. This direct use relies on using the register BAR address as a pointer to a struct pci_epf_test_reg to execute the test case and to send back the test result through the status field of struct pci_epf_test_reg. In practice, the status field is always updated before an interrupt is raised in pci_epf_test_raise_irq(), to ensure that the RC side sees the updated status when receiving an interrupt. However, such assignment direct access does not ensure that changes to the status register make it to memory, and so visible to the host, before an interrupt is raised, thus potentially resulting in the RC host not seeing the correct status result for a test. Avoid this potential problem by using READ_ONCE()/WRITE_ONCE() when accessing the command and status fields of a pci_epf_test_reg structure. This ensure that a test start (pci_epf_test_cmd_handler() function) and completion (with the function pci_epf_test_raise_irq()) achieve a correct synchronization with the MMIO register accesses on the RC host. Link: https://lore.kernel.org/r/20230415023542.77601-10-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Simplify IRQ test commands executionDamien Le Moal
For the commands COMMAND_RAISE_LEGACY_IRQ, COMMAND_RAISE_MSI_IRQ and COMMAND_RAISE_MSIX_IRQ, the function pci_epf_test_cmd_handler() sets the STATUS_IRQ_RAISED status flag and calls the epc function pci_epc_raise_irq() directly. However, this is also exactly what the pci_epf_test_raise_irq() function does. Avoid duplicating these operations by directly using pci_epf_test_raise_irq() for the IRQ test commands. It is OK to do so as the host side endpoint test driver always set the correct IRQ type for the IRQ test commands. At the same time, move the IRQ number check done for the COMMAND_RAISE_MSI_IRQ and COMMAND_RAISE_MSIX_IRQ commands to pci_epf_test_raise_irq(), to also check the IRQ number requested by the host for other test commands. This significantly simplifies pci_epf_test_cmd_handler(). Link: https://lore.kernel.org/r/20230415023542.77601-9-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Simplify pci_epf_test_raise_irq()Damien Le Moal
Change the interface of the function pci_epf_test_raise_irq() to directly pass a pointer to the struct pci_epf_test_reg defining the test being executed. This avoids the need for grabbing this pointer using the register BAR address and simplifies the call sites as the IRQ type and IRQ numbers do not have to be passed as arguments. Link: https://lore.kernel.org/r/20230415023542.77601-8-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Simplify read/write/copy test functionsDamien Le Moal
The function pci_epf_test_cmd_handler() uses the register BAR address as a pointer to a struct pci_epf_test_reg to determine the command sent by the host and to execute the test function accordingly. There is no need for doing this assignment again in each of the read, write and copy test functions. We can simply pass the reg pointer as an argument to the functions pci_epf_test_write(), pci_epf_test_read() and pci_epf_test_copy(). Link: https://lore.kernel.org/r/20230415023542.77601-7-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Use dmaengine_submit() to initiate DMA transferDamien Le Moal
Instead of an open coded call to the tx_submit() operation of struct dma_async_tx_descriptor, use the helper function dmaengine_submit(). No functional change is introduced with this. Link: https://lore.kernel.org/r/20230415023542.77601-6-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Fix DMA transfer completion detectionDamien Le Moal
pci_epf_test_data_transfer() and pci_epf_test_dma_callback() are not handling DMA transfer completion correctly, leading to completion notifications to the RC side that are too early. This problem can be detected when the RC side is running an IOMMU with messages such as: pci-endpoint-test 0000:0b:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x001c address=0xfff00000 flags=0x0000] When running the pcitest.sh tests: the address used for a previous test transfer generates the above error while the next test transfer is running. Fix this by testing the DMA transfer status in pci_epf_test_dma_callback() and notifying the completion only when the transfer status is DMA_COMPLETE or DMA_ERROR. Furthermore, in pci_epf_test_data_transfer(), be paranoid and check again the transfer status and always call dmaengine_terminate_sync() before returning. Link: https://lore.kernel.org/r/20230415023542.77601-5-dlemoal@kernel.org Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org
2023-06-23PCI: epf-test: Fix DMA transfer completion initializationDamien Le Moal
Reinitialize the transfer_complete DMA transfer completion before calling tx_submit(), to avoid seeing the DMA transfer complete before the completion is initialized, thus potentially losing the completion notification. Link: https://lore.kernel.org/r/20230415023542.77601-4-dlemoal@kernel.org Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org
2023-06-23PCI: endpoint: Move pci_epf_type_add_cfs() codeDamien Le Moal
pci_epf_type_add_cfs() is called only from pci_ep_cfs_add_type_group() in drivers/pci/endpoint/pci-ep-cfs.c, so there is no need to export this function. Move its code from pci-epf-core.c to pci-ep-cfs.c as a static function. Link: https://lore.kernel.org/r/20230415023542.77601-3-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: endpoint: Automatically create a function specific attributes groupDamien Le Moal
A PCI endpoint function driver can define function specific attributes under its function configfs directory using the add_cfs() endpoint driver operation. This is done by tying up the mkdir operation for the function configfs directory to a call to the add_cfs() operation. However, there are no checks preventing the user from repeatedly creating function specific attribute directories with different names, resulting in the same endpoint specific attributes group being added multiple times, which also result in an invalid reference counting for the attribute groups. E.g., using the pci-epf-ntb function driver as an example, the user creates the function as follows: $ modprobe pci-epf-ntb $ cd /sys/kernel/config/pci_ep/functions/pci_epf_ntb $ mkdir func0 $ tree func0 func0/ |-- baseclass_code |-- cache_line_size |-- ... `-- vendorid $ mkdir func0/attrs $ tree func0 func0/ |-- attrs | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- baseclass_code |-- cache_line_size |-- ... `-- vendorid At this point, the function can be started by linking the EP controller. However, if the user mistakenly creates again a directory: $ mkdir func0/attrs2 $ tree func0 func0/ |-- attrs | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- attrs2 | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- baseclass_code |-- cache_line_size |-- ... `-- vendorid The endpoint function specific attributes are duplicated and cause a crash when the endpoint function device is torn down: refcount_t: addition on 0; use-after-free. WARNING: CPU: 2 PID: 834 at lib/refcount.c:25 refcount_warn_saturate+0xc8/0x144 CPU: 2 PID: 834 Comm: rmdir Not tainted 6.3.0-rc1 #1 Hardware name: Pine64 RockPro64 v2.1 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) ... Call trace: refcount_warn_saturate+0xc8/0x144 config_item_get+0x7c/0x80 configfs_rmdir+0x17c/0x30c vfs_rmdir+0x8c/0x204 do_rmdir+0x158/0x184 __arm64_sys_unlinkat+0x64/0x80 invoke_syscall+0x48/0x114 ... Fix this by modifying pci_epf_cfs_work() to execute the new function pci_ep_cfs_add_type_group() which itself calls pci_epf_type_add_cfs() to obtain the function specific attribute group and the group name (directory name) from the endpoint function driver. If the function driver defines an attribute group, pci_ep_cfs_add_type_group() then proceeds to register this group using configfs_register_group(), thus automatically exposing the function type specific configfs attributes to the user. E.g.: $ modprobe pci-epf-ntb $ cd /sys/kernel/config/pci_ep/functions/pci_epf_ntb $ mkdir func0 $ tree func0 func0/ |-- baseclass_code |-- cache_line_size |-- ... |-- pci_epf_ntb.0 | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- primary |-- ... `-- vendorid With this change, there is no need for the user to create or delete directories in the endpoint function attributes directory. The pci_epf_type_group_ops group operations are thus removed. Also update the documentation for the pci-epf-ntb and pci-epf-vntb function drivers to reflect this change, removing the explanations showing the need to manually create the sub-directory for the function specific attributes. Link: https://lore.kernel.org/r/20230415023542.77601-2-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: endpoint: Fix a Kconfig prompt of vNTB driverShunsuke Mie
vNTB driver and NTB driver have same Kconfig prompt. Changed to make it distinguishable. Link: https://lore.kernel.org/r/20230202103832.2038286-1-mie@igel.co.jp Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Signed-off-by: Shunsuke Mie <mie@igel.co.jp> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23net/mlx5: Remove pointless vport lookup from mlx5_esw_check_port_type()Jiri Pirko
As xa_get_mark() returns false in case the entry is not present, no need to redundantly check if vport is present. Remove the lookup. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5: Remove redundant check from mlx5_esw_query_vport_vhca_id()Jiri Pirko
Since mlx5_esw_query_vport_vhca_id() could be called either from mlx5_esw_vport_enable() or mlx5_esw_vport_disable() where the the check is done, this is always false here. Remove the redundant check. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5: Remove redundant is_mdev_switchdev_mode() check from ↵Jiri Pirko
is_ib_rep_supported() is_mdev_switchdev_mode() check is done in is_eth_rep_supported(). Function is_ib_rep_supported() calls is_eth_rep_supported(). Remove the redundant check from it. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5: Remove redundant MLX5_ESWITCH_MANAGER() check from ↵Jiri Pirko
is_ib_rep_supported() MLX5_ESWITCH_MANAGER() check is done in is_eth_rep_supported(). Function is_ib_rep_supported() calls is_eth_rep_supported(). Remove the redundant check from it. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5e: E-Switch, Fix shared fdb error flowRoi Dayan
On error flow resources being freed in esw_master_egress_destroy_resources() but pointers not being set to null if error flow is from creating a bounce rule. Then in esw_acl_egress_ofld_cleanup() we try to access already freed pointers. Fix it by resetting the pointers to null. Also if error is from creating a second or later bounce rule then the flow group and table being used and cannot and should not be freed. Add a check to destroy the flow group and table if there are no bounce rules. mlx5_core.sf mlx5_core.sf.2: mlx5_destroy_flow_group:2306:(pid 2235): Flow group 4 wasn't destroyed, refcount > 1 mlx5_core.sf mlx5_core.sf.2: mlx5_destroy_flow_table:2295:(pid 2235): Flow table 3 wasn't destroyed, refcount > 1 Fixes: 5e0202eb49ed ("net/mlx5: E-switch, Handle multiple master egress rules") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5e: Remove redundant commentRoi Dayan
The function comment says what it is and the comment is redundant. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5e: E-Switch, Pass other_vport flag if vport is not 0Roi Dayan
When creating flow table for shared fdb resources, there is only need to pass other_vport flag if vport is not 0 or if the port is ECPF in BlueField. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5e: E-Switch, Use xarray for devcom paired device indexRoi Dayan
To allow devcom events on E-Switch that is not a vport group manager, use vhca id as an index instead of device index which might be shared between several E-Switches. for example SF and its PF. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5e: E-Switch, Add peer fdb miss rules for vport manager or ecpfRoi Dayan
Add peer fdb rules for E-Switch that are vport managers or ecpf device. It is not needed for other devices. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5e: Use vhca_id for device index in vport rx rulesRoi Dayan
Device index is like PF index and limited to max physical ports. For example, SFs created under PF the device index is the PF device index. Use vhca_id which gets the FW index per vport, for vport rx rules and vport pair events. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5: Lag, Remove duplicate code checking lag is supportedRoi Dayan
Remove duplicate function for checking if device has lag support. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5: Fix error code in mlx5_is_reset_now_capable()Dan Carpenter
The mlx5_is_reset_now_capable() function returns bool, not negative error codes. So if fast teardown is not supported it should return false instead of -EOPNOTSUPP. Fixes: 92501fa6e421 ("net/mlx5: Ack on sync_reset_request only if PF can do reset_now") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23net/mlx5: Fix UAF in mlx5_eswitch_cleanup()Shay Drory
mlx5_eswitch_cleanup() is using esw right after freeing it for releasing devlink_param. Fix it by releasing the devlink_param before freeing the esw, and adjust the create function accordingly. Fixes: 3f90840305e2 ("net/mlx5: Move esw multiport devlink param to eswitch code") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Automatic Verification <verifier@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-23Merge branches 'for-next/kpti', 'for-next/missing-proto-warn', ↵Catalin Marinas
'for-next/iss2-decode', 'for-next/kselftest', 'for-next/misc', 'for-next/feat_mops', 'for-next/module-alloc', 'for-next/sysreg', 'for-next/cpucap', 'for-next/acpi', 'for-next/kdump', 'for-next/acpi-doc', 'for-next/doc' and 'for-next/tpidr2-fix', remote-tracking branch 'arm64/for-next/perf' into for-next/core * arm64/for-next/perf: docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst docs: perf: Add new description for HiSilicon UC PMU drivers/perf: hisi: Add support for HiSilicon UC PMU driver drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE perf/arm-cmn: Add sysfs identifier perf/arm-cmn: Revamp model detection perf/arm_dmc620: Add cpumask dt-bindings: perf: fsl-imx-ddr: Add i.MX93 compatible drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver perf/arm_cspmu: Decouple APMT dependency perf/arm_cspmu: Clean up ACPI dependency ACPI/APMT: Don't register invalid resource perf/arm_cspmu: Fix event attribute type perf: arm_cspmu: Set irq affinitiy only if overflow interrupt is used drivers/perf: hisi: Don't migrate perf to the CPU going to teardown drivers/perf: apple_m1: Force 63bit counters for M2 CPUs perf/arm-cmn: Fix DTC reset perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robust perf/arm-cci: Slightly optimize cci_pmu_sync_counters() * for-next/kpti: : Simplify KPTI trampoline exit code arm64: entry: Simplify tramp_alias macro and tramp_exit routine arm64: entry: Preserve/restore X29 even for compat tasks * for-next/missing-proto-warn: : Address -Wmissing-prototype warnings arm64: add alt_cb_patch_nops prototype arm64: move early_brk64 prototype to header arm64: signal: include asm/exception.h arm64: kaslr: add kaslr_early_init() declaration arm64: flush: include linux/libnvdimm.h arm64: module-plts: inline linux/moduleloader.h arm64: hide unused is_valid_bugaddr() arm64: efi: add efi_handle_corrupted_x18 prototype arm64: cpuidle: fix #ifdef for acpi functions arm64: kvm: add prototypes for functions called in asm arm64: spectre: provide prototypes for internal functions arm64: move cpu_suspend_set_dbg_restorer() prototype to header arm64: avoid prototype warnings for syscalls arm64: add scs_patch_vmlinux prototype arm64: xor-neon: mark xor_arm64_neon_*() static * for-next/iss2-decode: : Add decode of ISS2 to data abort reports arm64/esr: Add decode of ISS2 to data abort reporting arm64/esr: Use GENMASK() for the ISS mask * for-next/kselftest: : Various arm64 kselftest improvements kselftest/arm64: Log signal code and address for unexpected signals kselftest/arm64: Add a smoke test for ptracing hardware break/watch points * for-next/misc: : Miscellaneous patches arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe arm64: hibernate: remove WARN_ON in save_processor_state arm64/fpsimd: Exit streaming mode when flushing tasks arm64: mm: fix VA-range sanity check arm64/mm: remove now-superfluous ISBs from TTBR writes arm64: consolidate rox page protection logic arm64: set __exception_irq_entry with __irq_entry as a default arm64: syscall: unmask DAIF for tracing status arm64: lockdep: enable checks for held locks when returning to userspace arm64/cpucaps: increase string width to properly format cpucaps.h arm64/cpufeature: Use helper for ECV CNTPOFF cpufeature * for-next/feat_mops: : Support for ARMv8.8 memcpy instructions in userspace kselftest/arm64: add MOPS to hwcap test arm64: mops: allow disabling MOPS from the kernel command line arm64: mops: detect and enable FEAT_MOPS arm64: mops: handle single stepping after MOPS exception arm64: mops: handle MOPS exceptions KVM: arm64: hide MOPS from guests arm64: mops: don't disable host MOPS instructions from EL2 arm64: mops: document boot requirements for MOPS KVM: arm64: switch HCRX_EL2 between host and guest arm64: cpufeature: detect FEAT_HCX KVM: arm64: initialize HCRX_EL2 * for-next/module-alloc: : Make the arm64 module allocation code more robust (clean-up, VA range expansion) arm64: module: rework module VA range selection arm64: module: mandate MODULE_PLTS arm64: module: move module randomization to module.c arm64: kaslr: split kaslr/module initialization arm64: kasan: remove !KASAN_VMALLOC remnants arm64: module: remove old !KASAN_VMALLOC logic * for-next/sysreg: (21 commits) : More sysreg conversions to automatic generation arm64/sysreg: Convert TRBIDR_EL1 register to automatic generation arm64/sysreg: Convert TRBTRG_EL1 register to automatic generation arm64/sysreg: Convert TRBMAR_EL1 register to automatic generation arm64/sysreg: Convert TRBSR_EL1 register to automatic generation arm64/sysreg: Convert TRBBASER_EL1 register to automatic generation arm64/sysreg: Convert TRBPTR_EL1 register to automatic generation arm64/sysreg: Convert TRBLIMITR_EL1 register to automatic generation arm64/sysreg: Rename TRBIDR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBTRG_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBMAR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBSR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBBASER_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBPTR_EL1 fields per auto-gen tools format arm64/sysreg: Rename TRBLIMITR_EL1 fields per auto-gen tools format arm64/sysreg: Convert OSECCR_EL1 to automatic generation arm64/sysreg: Convert OSDTRTX_EL1 to automatic generation arm64/sysreg: Convert OSDTRRX_EL1 to automatic generation arm64/sysreg: Convert OSLAR_EL1 to automatic generation arm64/sysreg: Standardise naming of bitfield constants in OSL[AS]R_EL1 arm64/sysreg: Convert MDSCR_EL1 to automatic register generation ... * for-next/cpucap: : arm64 cpucap clean-up arm64: cpufeature: fold cpus_set_cap() into update_cpu_capabilities() arm64: cpufeature: use cpucap naming arm64: alternatives: use cpucap naming arm64: standardise cpucap bitmap names * for-next/acpi: : Various arm64-related ACPI patches ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init() * for-next/kdump: : Simplify the crashkernel reservation behaviour of crashkernel=X,high on arm64 arm64: add kdump.rst into index.rst Documentation: add kdump.rst to present crashkernel reservation on arm64 arm64: kdump: simplify the reservation behaviour of crashkernel=,high * for-next/acpi-doc: : Update ACPI documentation for Arm systems Documentation/arm64: Update ACPI tables from BBR Documentation/arm64: Update references in arm-acpi Documentation/arm64: Update ARM and arch reference * for-next/doc: : arm64 documentation updates Documentation/arm64: Add ptdump documentation * for-next/tpidr2-fix: : Fix the TPIDR2_EL0 register restoring on sigreturn kselftest/arm64: Add a test case for TPIDR2 restore arm64/signal: Restore TPIDR2 register rather than memory state
2023-06-23PCI/ACPI: Call _REG when transitioning D-statesMario Limonciello
ACPI r6.5, sec 6.5.4, describes how AML is unable to access an OperationRegion unless _REG has been called to connect a handler: The OS runs _REG control methods to inform AML code of a change in the availability of an operation region. When an operation region handler is unavailable, AML cannot access data fields in that region. (Operation region writes will be ignored and reads will return indeterminate data.) The PCI core does not call _REG at any time, leading to the undefined behavior mentioned in the spec. The spec explains that _REG should be executed to indicate whether a given region can be accessed: Once _REG has been executed for a particular operation region, indicating that the operation region handler is ready, a control method can access fields in the operation region. Conversely, control methods must not access fields in operation regions when _REG method execution has not indicated that the operation region handler is ready. An example included in the spec demonstrates calling _REG when devices are turned off: "when the host controller or bridge controller is turned off or disabled, PCI Config Space Operation Regions for child devices are no longer available. As such, ETH0’s _REG method will be run when it is turned off and will again be run when PCI1 is turned off." It is reported that ASMedia PCIe GPIO controllers fail functional tests after the system has returning from suspend (S3 or s2idle). This is because the BIOS checks whether the OSPM has called the _REG method to determine whether it can interact with the OperationRegion assigned to the device as part of the other AML called for the device. To fix this issue, call acpi_evaluate_reg() when devices are transitioning to D3cold or D0. [bhelgaas: split pci_power_t checking to preliminary patch] Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#reg-region Link: https://lore.kernel.org/r/20230620140451.21007-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
2023-06-23PCI/ACPI: Validate acpi_pci_set_power_state() parameterBjorn Helgaas
Previously acpi_pci_set_power_state() assumed the requested power state was valid (PCI_D0 ... PCI_D3cold). If a caller supplied something else, we could index outside the state_conv[] array and pass junk to acpi_device_set_power(). Validate the pci_power_t parameter and return -EINVAL if it's invalid. Link: https://lore.kernel.org/r/20230621222857.GA122930@bhelgaas Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
2023-06-23PCI/PM: Avoid putting EloPOS E2/S2/H2 PCIe Ports in D3coldOndrej Zary
The quirk for Elo i2 introduced in commit 92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") is also needed by EloPOS E2/S2/H2 which uses the same Continental Z2 board. Change the quirk to match the board instead of system. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215715 Link: https://lore.kernel.org/r/20230614074253.22318-1-linux@zary.sk Signed-off-by: Ondrej Zary <linux@zary.sk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2023-06-23Merge branch 'nand/next' into mtd/nextMiquel Raynal
2023-06-23regulator: Add Renesas PMIC RAA215300 driverBiju Das
The RAA215300 is a 9-channel PMIC that consists of * Internally compensated regulators * built-in Real Time Clock (RTC) * 32kHz crystal oscillator * coin cell battery charger The RTC on RAA215300 is similar to the IP found in the ISL1208. The existing driver for the ISL1208 works for this PMIC too, however the RAA215300 exposes two devices via I2C, one for the RTC IP, and one for everything else. The RTC IP has to be enabled by the other I2C device, therefore this driver is necessary to get the RTC to work. The external oscillator bit is inverted on PMIC version 0x11. Add PMIC RAA215300 driver for enabling RTC block and instantiating RTC device based on PMIC version. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/Message-Id: <20230623140948.384762-3-biju.das.jz@bp.renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23hwmon: (corsair-psu) various cleanupsWilken Gottwalt
Fix some typos, adjust documentation and comments to current state of knowledge and update coding style to be more uniform. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZJWf3H972hGgLK-8@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-23dm ioctl: Refuse to create device named "." or ".."Demi Marie Obenour
Using either of these is going to greatly confuse userspace, as they are not valid symlink names and so creating the usual /dev/mapper/NAME symlink will not be possible. As creating a device with either of these names is almost certainly a userspace bug, just error out. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Refuse to create device named "control"Demi Marie Obenour
Typical userspace setups create a symlink under /dev/mapper with the name of the device, but /dev/mapper/control is reserved for DM's control device. Therefore, trying to create such a device is almost certain to be a userspace bug. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Avoid double-fetch of versionDemi Marie Obenour
The version is fetched once in check_version(), which then does some validation and then overwrites the version in userspace with the API version supported by the kernel. copy_params() then fetches the version from userspace *again*, and this time no validation is done. The result is that the kernel's version number is completely controllable by userspace, provided that userspace can win a race condition. Fix this flaw by not copying the version back to the kernel the second time. This is not exploitable as the version is not further used in the kernel. However, it could become a problem if future patches start relying on the version field. Cc: stable@vger.kernel.org Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: structs and parameter strings must not overlapDemi Marie Obenour
The NUL terminator for each target parameter string must precede the following 'struct dm_target_spec'. Otherwise, dm_split_args() might corrupt this struct. Furthermore, the first 'struct dm_target_spec' must come after the 'struct dm_ioctl', as if it overlaps too much dm_split_args() could corrupt the 'struct dm_ioctl'. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Avoid pointer arithmetic overflowDemi Marie Obenour
Especially on 32-bit systems, it is possible for the pointer arithmetic to overflow and cause a userspace pointer to be dereferenced in the kernel. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Check dm_target_spec is sufficiently alignedDemi Marie Obenour
Otherwise subsequent code, if given malformed input, could dereference a misaligned 'struct dm_target_spec *'. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> # use %zu Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23scsi/sg: don't grab scsi host module referenceYu Kuai
In order to prevent request_queue to be freed before cleaning up blktrace debugfs entries, commit db59133e9279 ("scsi: sg: fix blktrace debugfs entries leakage") use scsi_device_get(), however, scsi_device_get() will also grab scsi module reference and scsi module can't be removed. It's reported that blktests can't unload scsi_debug after block/001: blktests (master) # ./check block block/001 (stress device hotplugging) [failed] +++ /root/blktests/results/nodev/block/001.out.bad 2023-06-19 Running block/001 Stressing sd +modprobe: FATAL: Module scsi_debug is in use. Fix this problem by grabbing request_queue reference directly, so that scsi host module can still be unloaded while request_queue will be pinged by sg device. Reported-by: Chaitanya Kulkarni <chaitanyak@nvidia.com> Link: https://lore.kernel.org/all/1760da91-876d-fc9c-ab51-999a6f66ad50@nvidia.com/ Fixes: db59133e9279 ("scsi: sg: fix blktrace debugfs entries leakage") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230621160111.1433521-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23clk: ralink: mtmips: Fix uninitialized use of ret in ↵Nathan Chancellor
mtmips_register_{fixed,factor}_clocks() Clang warns: drivers/clk/ralink/clk-mtmips.c:309:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized] 309 | return ret; | ^~~ drivers/clk/ralink/clk-mtmips.c:285:9: note: initialize the variable 'ret' to silence this warning 285 | int ret, i; | ^ | = 0 drivers/clk/ralink/clk-mtmips.c:359:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized] 359 | return ret; | ^~~ drivers/clk/ralink/clk-mtmips.c:335:9: note: initialize the variable 'ret' to silence this warning 335 | int ret, i; | ^ | = 0 2 errors generated. Set ret to the return value of clk_hw_register_fixed_rate() using the PTR_ERR() macro, which ensures ret is not used uninitialized, clearing up the warning. Fixes: 6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs") Closes: https://github.com/ClangBuiltLinux/linux/issues/1879 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycleClark Wang
Claim clkhi and clklo as integer type to avoid possible calculation errors caused by data overflow. Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: qup: Add missing unwind goto in qup_i2c_probe()Shuai Jiang
Smatch Warns: drivers/i2c/busses/i2c-qup.c:1784 qup_i2c_probe() warn: missing unwind goto? The goto label "fail_runtime" and "fail" will disable qup->pclk, but here qup->pclk failed to obtain, in order to be consistent, change the direct return to goto label "fail_dma". Fixes: 9cedf3b2f099 ("i2c: qup: Add bam dma capabilities") Signed-off-by: Shuai Jiang <d202180596@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Cc: <stable@vger.kernel.org> # v4.6+
2023-06-23of: unittest: drop assertions for GPIO hog messagesBartosz Golaszewski
These have now been demoted to debug and are normally hidden. Drop the assertions entirely. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org>
2023-06-23spi: Add support for Renesas CSIFabrizio Castro
The RZ/V2M SoC comes with the Clocked Serial Interface (CSI) IP, which is a master/slave SPI controller. This commit adds a driver to support CSI master mode. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Link: https://lore.kernel.org/r/Message-Id: <20230622113341.657842-4-fabrizio.castro.jz@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23s390/ctcm: Convert sprintf/snprintf to scnprintfThorsten Winkler
This LWN article explains the why scnprintf is preferred over snprintf in general https://lwn.net/Articles/69419/ Ie. snprintf() returns what *would* be the resulting length, while scnprintf() returns the actual length. Note that ctcm_print_statistics() writes the data into the kernel log and is therefore not suitable for sysfs_emit(). Observable behavior is not changed, as there may be dependencies. Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23s390/ctcm: Convert sysfs sprintf to sysfs_emitThorsten Winkler
Following the advice of the Documentation/filesystems/sysfs.rst. All sysfs related show()-functions should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23s390/lcs: Convert sprintf to scnprintfThorsten Winkler
This LWN article explains the why scnprintf is preferred over snprintf in general https://lwn.net/Articles/69419/ Ie. snprintf() returns what *would* be the resulting length, while scnprintf() returns the actual length. Reported-by: Jules Irenge <jbi.octave@gmail.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23s390/lcs: Convert sysfs sprintf to sysfs_emitThorsten Winkler
Following the advice of the Documentation/filesystems/sysfs.rst. All sysfs related show()-functions should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. While at it, follow Linux kernel coding style and unify indentation Reported-by: Jules Irenge <jbi.octave@gmail.com> Reported-by: Joe Perches <joe@perches.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23net: hns3: clear hns unused parameter alarmPeiyang Wang
Several functions in the hns3 driver have unused parameters. The compiler will warn about them when building with -Wunused-parameter option of hns3. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-29 13:43:07 +0000