| Age | Commit message (Collapse) | Author |
|---|
|
ssh://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A sched fence reference leak fix, two fence fixes for v3d, two overflow
fixes for quaic, and a iommu handling fix for host1x.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250320-valiant-outstanding-nightingale-e9acae@houat
|
|
This patch introduces basic I2C support for the SpacemiT K1 SoC,
utilizing interrupts for transfers.
The driver has been tested using i2c-tools on a Bananapi-F3 board,
and basic I2C read/write operations have been confirmed to work.
Signed-off-by: Troy Mitchell <troymitchell988@gmail.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250319-k1-i2c-master-v8-2-013e2df2b78d@gmail.com
|
|
Some SoCs require muxes in the routing for SDA and SCL lines.
Therefore, add support for setting the mux by reading the mux-states
property from the dt-node.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20250318103622.29979-3-j-choudhary@ti.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The driver gives the illusion of 10-bit address support, but the upper
3 bits of the given address are always thrown away. Remove unnecessary
considerations for 10 bit addressing and always complete 7 bit ops when
using the hlc methods.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250318021632.2710792-3-aryan.srivastava@alliedtelesis.co.nz
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Kernel-docs require a ':' to signify the return behaviour of a function
with within the comment. Many functions in this file were missing ':'
after the "Returns" line, resulting in kernel-doc warnings.
Add the ':' to satisfy kernel-doc requirements.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250318021632.2710792-2-aryan.srivastava@alliedtelesis.co.nz
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This patch replaces max(a, min(b, c)) by clamp(val, lo, hi) in the nvme
driver. The clamp() macro explicitly expresses the intent of constraining
a value within bounds, improving code readability.
Signed-off-by: Li Haoran <li.haoran7@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In a SELinux enabled kernel, socket_create() initializes the security
label of the socket using the security label of the calling process,
this typically works well.
However, in a containerized environment like Kubernetes, problem arises
when a privileged container(domain spc_t) connects to an NVMe target and
mounts the NVMe as persistent storage for unprivileged containers(domain
container_t).
This is because the container_t domain cannot access resources labeled
with spc_t, resulting in socket_sendmsg returning -EACCES.
The solution is to use socket_create_kern() instead of socket_create(),
which labels the socket context to kernel_t. Access control will then
be handled by the VFS layer rather than the socket itself.
Signed-off-by: Peijie Shao <shaopeijie@cestc.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
NVMe PCIe Transport Specification 1.1, section 2.1.10, claims that the
BAR0 type is Implementation Specific.
However, in NVMe 1.1, the type is required to be 64-bit.
Thus, to make our PCI EPF work on as many host systems as possible,
always configure the BAR0 type to be 64-bit.
In the rare case that the underlying PCI EPC does not support configuring
BAR0 as 64-bit, the call to pci_epc_set_bar() will fail, and we will
return a failure back to the user.
This should not be a problem, as most PCI EPCs support configuring a BAR
as 64-bit (and those EPCs with .only_64bit set to true in epc_features
only support configuring the BAR as 64-bit).
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We do uuid_copy twice in nvmet_alloc_ctrl so this patch deletes one
of the calls.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Instead of passing a pointer to a struct nvme_ctrl and a pointer to a
struct nvme_ns_head as the first two arguments of
nvme_zone_parse_entry(), pass only a pointer to a struct nvme_ns as both
the controller structure and ns head structure can be infered from the
namespace structure.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The functions nvmet_fc_iodnum() and nvmet_fc_fodnum() are currently
unutilized.
Following commit c53432030d86 ("nvme-fabrics: Add target support for FC
transport"), which introduced these two functions, they have not been
used at all in practice.
Remove them to resolve the compiler warnings.
Fix follow errors with clang-19 when W=1e:
drivers/nvme/target/fc.c:177:1: error: unused function 'nvmet_fc_iodnum' [-Werror,-Wunused-function]
177 | nvmet_fc_iodnum(struct nvmet_fc_ls_iod *iodptr)
| ^~~~~~~~~~~~~~~
drivers/nvme/target/fc.c:183:1: error: unused function 'nvmet_fc_fodnum' [-Werror,-Wunused-function]
183 | nvmet_fc_fodnum(struct nvmet_fc_fcp_iod *fodptr)
| ^~~~~~~~~~~~~~~
2 errors generated.
make[8]: *** [scripts/Makefile.build:207: drivers/nvme/target/fc.o] Error 1
make[7]: *** [scripts/Makefile.build:465: drivers/nvme/target] Error 2
make[6]: *** [scripts/Makefile.build:465: drivers/nvme] Error 2
make[6]: *** Waiting for unfinished jobs....
Fixes: c53432030d86 ("nvme-fabrics: Add target support for FC transport")
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The ns variable has been removed in commit 62451a2b2e7e ("nvme: separate
command prep and issue"). Drop reference to ns in comment.
Fixes: 62451a2b2e7e ("nvme: separate command prep and issue")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Refactor nvme_fc_create_io_queues() and nvme_fc_recreate_io_queues() to
use the min3() macro to find the minimum between 3 values instead of
multiple min()'s. This shortens the code and makes it easier to read.
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch helps add nvme native multipath visibility for queue-depth
io-policy. It adds a new attribute file named "queue_depth" under
namespace device path node which would print the number of active/
in-flight I/O requests currently queued for the given path.
For instance, if we have a shared namespace accessible from two different
controllers/paths then accessing head block node of the shared namespace
would show the following output:
$ ls -l /sys/block/nvme1n1/multipath/
nvme1c1n1 -> ../../../../../pci052e:78/052e:78:00.0/nvme/nvme1/nvme1c1n1
nvme1c3n1 -> ../../../../../pci058e:78/058e:78:00.0/nvme/nvme3/nvme1c3n1
In the above example, nvme1n1 is head gendisk node created for a shared
namespace and the namespace is accessible from nvme1c1n1 and nvme1c3n1
paths. For queue-depth io-policy we can then refer the "queue_depth"
attribute file created under each namespace path:
$ cat /sys/block/nvme1n1/multipath/nvme1c1n1/queue_depth
518
$cat /sys/block/nvme1n1/multipath/nvme1c3n1/queue_depth
504
>From the above output, we can infer that I/O workload targeted at nvme1n1
uses two paths nvme1c1n1 and nvme1c3n1 and the current queue depth of each
path is 518 and 504 respectively. Reading "queue_depth" file when
configured io-policy is anything but queue-depth would show no output.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch helps add nvme native multipath visibility for numa io-policy.
It adds a new attribute file named "numa_nodes" under namespace gendisk
device path node which prints the list of numa nodes preferred by the
given namespace path. The numa nodes value is comma delimited list of
nodes or A-B range of nodes.
For instance, if we have a shared namespace accessible from two different
controllers/paths then accessing head node of the shared namespace would
show the following output:
$ ls -l /sys/block/nvme1n1/multipath/
nvme1c1n1 -> ../../../../../pci052e:78/052e:78:00.0/nvme/nvme1/nvme1c1n1
nvme1c3n1 -> ../../../../../pci058e:78/058e:78:00.0/nvme/nvme3/nvme1c3n1
In the above example, nvme1n1 is head gendisk node created for a shared
namespace and this namespace is accessible from nvme1c1n1 and nvme1c3n1
paths. For numa io-policy we can then refer the "numa_nodes" attribute
file created under each namespace path:
$ cat /sys/block/nvme1n1/multipath/nvme1c1n1/numa_nodes
0-1
$ cat /sys/block/nvme1n1/multipath/nvme1c3n1/numa_nodes
2-3
>From the above output, we infer that I/O workload targeted at nvme1n1
and running on numa nodes 0 and 1 would prefer using path nvme1c1n1.
Similarly, I/O workload running on numa nodes 2 and 3 would prefer
using path nvme1c3n1. Reading "numa_nodes" file when configured
io-policy is anything but numa would show no output.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch helps add nvme native multipath visibility for round-robin
io-policy. It creates a "multipath" sysfs directory under head gendisk
device node directory and then from "multipath" directory it adds a link
to each namespace path device the head node refers.
For instance, if we have a shared namespace accessible from two different
controllers/paths then we create a soft link to each path device from head
disk node as shown below:
$ ls -l /sys/block/nvme1n1/multipath/
nvme1c1n1 -> ../../../../../pci052e:78/052e:78:00.0/nvme/nvme1/nvme1c1n1
nvme1c3n1 -> ../../../../../pci058e:78/058e:78:00.0/nvme/nvme3/nvme1c3n1
In the above example, nvme1n1 is head gendisk node created for a shared
namespace and the namespace is accessible from nvme1c1n1 and nvme1c3n1
paths.
For round-robin I/O policy, we could easily infer from the above output
that I/O workload targeted to nvme1n1 would toggle across paths nvme1c1n1
and nvme1c3n1.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add debugfs entries to display the 'concat' and 'tls_key' controller
attributes.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Evaluate the SC_C flag during DH-CHAP-HMAC negotiation to check if secure
concatenation as specified in the NVMe Base Specification v2.1, section
8.3.4.3: "Secure Channel Concatenationand" is requested. If requested the
generated PSK is inserted into the keyring once negotiation has finished
allowing for an encrypted connection once the admin queue is restarted.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
For secure concatenation the result of the TLS handshake will be
stored in the 'sq' struct, so add it to the alloc_ctrl_args struct.
Cc: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When secure concatenation is requested the connection needs to be
reset to enable TLS encryption on the new cnnection.
That implies that the original connection used for the DH-CHAP
negotiation really shouldn't be used, and we should reset as soon
as the DH-CHAP negotiation has succeeded on the admin queue.
Based on an idea from Sagi.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a fabrics option 'concat' to request secure channel concatenation as
specified the NVME Base Specification v2.1, section 8.3.4.3: Secure Channel
Concatenation.
When secure channel concatenation is enabled a 'generated PSK' is inserted
into the keyring such that it's available after reset.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a function to refresh a generated PSK in the specified keyring.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a function to derive the TLS PSK as specified TP8018.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a function to calculate the PSK digest as specified in TP8018.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a function to generate a NVMe PSK from the shared credentials
negotiated by DH-HMAC-CHAP.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add support for a new fwctl-based auxiliary_device for creating a
channel for fwctl support into the AMD/Pensando DSC.
Link: https://patch.msgid.link/r/20250320194412.67983-4-shannon.nelson@amd.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In preparation for adding a new auxiliary_device for the PF,
make the vif type an argument to pdsc_auxbus_dev_add(). Pass in
the address of the padev pointer so that the caller can specify
where to save it and keep the mutex usage within the function.
Link: https://patch.msgid.link/r/20250320194412.67983-3-shannon.nelson@amd.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since there really is no useful return, advertising a return value
is rather misleading. Make pdsc_auxbus_dev_del() a void function.
Link: https://patch.msgid.link/r/20250320194412.67983-2-shannon.nelson@amd.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Clang warns (or errors with CONFIG_WERROR=y):
drivers/i3c/master/svc-i3c-master.c:596:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
596 | default:
| ^
drivers/i3c/master/svc-i3c-master.c:596:2: note: insert 'break;' to avoid fall-through
596 | default:
| ^
| break;
1 error generated.
Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.
Fixes: 0430bf9bc1ac ("i3c: master: svc: Fix missing STOP for master request")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250319-i3c-fix-clang-fallthrough-v1-1-d8e02be1ef5c@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
If a faulty CXL memory device returns a broken zero LSA size in its
memory device information (Identify Memory Device (Opcode 4000h), CXL
spec. 3.1, 8.2.9.9.1.1), a divide error occurs in the libnvdimm
driver:
Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:nd_label_data_init+0x10e/0x800 [libnvdimm]
Code and flow:
1) CXL Command 4000h returns LSA size = 0
2) config_size is assigned to zero LSA size (CXL pmem driver):
drivers/cxl/pmem.c: .config_size = mds->lsa_size,
3) max_xfer is set to zero (nvdimm driver):
drivers/nvdimm/label.c: max_xfer = min_t(size_t, ndd->nsarea.max_xfer, config_size);
4) A subsequent DIV_ROUND_UP() causes a division by zero:
drivers/nvdimm/label.c: /* Make our initial read size a multiple of max_xfer size */
drivers/nvdimm/label.c: read_size = min(DIV_ROUND_UP(read_size, max_xfer) * max_xfer,
drivers/nvdimm/label.c- config_size);
Fix this by checking the config size parameter by extending an
existing check.
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250320112223.608320-1-rrichter@amd.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
For some reason, cardbus related io/mem size declarations are in
linux/pci.h, whereas non-cardbus sizes are already in pci/pci.h.
Move all them into one place in pci/pci.h.
Link: https://lore.kernel.org/r/20250311174701.3586-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_setup_bridge() is only used within setup-bus.c. Therefore, make it a
static function.
Link: https://lore.kernel.org/r/20250311174701.3586-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Neither pci_reassign_bridge_resources() nor pci_reassign_resource() is used
outside of the PCI subsystem. They seem to be naturally static functions
but since resource fitting/assignment is split between setup-bus.c and
setup-res.c, they fall into different sides of the divide and need to be
declared.
Move the declarations of pci_reassign_bridge_resources() and
pci_reassign_resource() into pci/pci.h to keep them internal to PCI
subsystem.
Link: https://lore.kernel.org/r/20250311174701.3586-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_rescan_bus_bridge_resize() is only used by code inside PCI subsystem.
The comment also falsely advertises it to be for hotplug drivers, yet the
only caller is from sysfs store function. Move the function declaration
into pci/pci.h.
Link: https://lore.kernel.org/r/20250311174701.3586-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
__resource_resize_store() attempts to release all resources of the device
before attempting the resize. The loop, however, only covers standard BARs
(< PCI_STD_NUM_BARS). If a device has VF BARs that are assigned,
pci_reassign_bridge_resources() finds the bridge window still has some
assigned child resources and returns -NOENT which makes
pci_resize_resource() to detect an error and abort the resize.
Change the release loop to cover all resources up to VF BARs which allows
the resize operation to release the bridge windows and attempt to assigned
them again with the different size.
If SR-IOV is enabled, disallow resize as it requires releasing also IOV
resources.
Link: https://lore.kernel.org/r/20250320142837.8027-1-ilpo.jarvinen@linux.intel.com
Fixes: 91fa127794ac ("PCI: Expose PCIe Resizable BAR support via sysfs")
Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Currently, pci_bridge_d3_possible() encodes a variety of decision factors
when deciding whether a given bridge can be put into D3. A particular one
of note is for "recent enough PCIe ports." Per Rafael [0]:
"There were hardware issues related to PM on x86 platforms predating
the introduction of Connected Standby in Windows. For instance,
programming a port into D3hot by writing to its PMCSR might cause the
PCIe link behind it to go down and the only way to revive it was to
power cycle the Root Complex. And similar."
Thus, this function contains a DMI-based check for post-2015 BIOS.
The above factors (Windows, x86) don't really apply to non-x86 systems, and
also, many such systems don't have BIOS or DMI. However, we'd like to be
able to suspend bridges on non-x86 systems too.
Restrict the "recent enough" check to x86. If we find further
incompatibilities, it probably makes sense to expand on the deny-list
approach (i.e., bridge_d3_blacklist or similar).
Link: https://lore.kernel.org/r/20250320110604.v6.1.Id0a0e78ab0421b6bce51c4b0b87e6aebdfc69ec7@changeid
Link: https://lore.kernel.org/linux-pci/CAJZ5v0j_6jeMAQ7eFkZBe5Yi+USGzysxAgfemYh=-zq4h5W+Qg@mail.gmail.com/ [0]
Link: https://lore.kernel.org/linux-pci/20240227225442.GA249898@bhelgaas/ [1]
Link: https://lore.kernel.org/linux-pci/20240828210705.GA37859@bhelgaas/ [2]
[Brian: rewrite to !X86 based on Rafael's suggestions]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Newer versions of supported chips support MMIO in addition to legacy
PMIO register access. Probe the MMIO PCI BAR and use faster MMIO
register access if available.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/b4748b7a-aac5-445c-b813-20c4d2c23ec3@gmail.com
|
|
Switch to iomapped register access as a prerequisite for adding
support for MMIO register access.
This changes replaces the delayed inb_p()/outb_p() calls with calls to
ioread8()/iowrite8() which don't have this extra delay. According to
Documentation/driver-api/device-io.rst the _p versions are needed
for ISA device access only, therefore switching to the non-delayed
versions should not cause problems. However a certain risk remains,
which on the other hand is significantly reduced by the fact that
recent systems will use MMIO instead of PIO. ICH7 datasheet from 2012
mentions already that SMBus register space is also memory-mapped.
So all systems from at least the last 10 yrs should be safe.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/67535b17-c3fb-4507-b083-9c1884b4dd7d@gmail.com
|
|
Add mshv_handler() to process messages related to managing guest
partitions such as intercepts, doorbells, and scheduling messages.
In a (non-nested) root partition, the same interrupt vector is shared
between the vmbus and mshv_root drivers.
Introduce a stub for mshv_handler() and call it in
sysvec_hyperv_callback alongside vmbus_handler().
Even though both handlers will be called for every Hyper-V interrupt,
the messages for each driver are delivered to different offsets
within the SYNIC message page, so they won't step on each other.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Add a pointer hv_synic_eventring_tail to track the tail pointer for the
SynIC event ring buffer for each SINT.
This will be used by the mshv driver, but must be tracked independently
since the driver module could be removed and re-inserted.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-8-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-8-git-send-email-nunodasneves@linux.microsoft.com>
|
|
hv_get_hypervisor_version(), hv_call_deposit_pages(), and
hv_call_create_vp(), are all needed in-module with CONFIG_MSHV_ROOT=m.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@microsoft.linux.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-7-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-7-git-send-email-nunodasneves@linux.microsoft.com>
|
|
node_to_pxm() is used by hv_numa_node_to_pxm_info().
That helper will be used by Hyper-V root partition module code
when CONFIG_MSHV_ROOT=m.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-6-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-6-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Factor out the check for enabling auto eoi, to be reused in root
partition code.
No functional changes.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Introduce hv_status_printk() macros as a convenience to log hypercall
errors, formatting them with the status code (HV_STATUS_*) as a raw hex
value and also as a string, which saves some time while debugging.
Create a table of HV_STATUS_ codes with strings and mapped errnos, and
use it for hv_result_to_string() and hv_result_to_errno().
Use the new hv_status_printk()s in hv_proc.c, hyperv-iommu.c, and
irqdomain.c hypercalls to aid debugging in the root partition.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com>
|
|
CONFIG_MSHV_ROOT allows kernels built to run as a normal Hyper-V guest
to exclude the root partition code, which is expected to grow
significantly over time.
This option is a tristate so future driver code can be built as a
(m)odule, allowing faster development iteration cycles.
If CONFIG_MSHV_ROOT is disabled, don't compile hv_proc.c, and stub
hv_root_partition() to return false unconditionally. This allows the
compiler to optimize away root partition code blocks since they will
be disabled at compile time.
In the case of booting as root partition *without* CONFIG_MSHV_ROOT
enabled, print a critical error (the kernel will likely crash).
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad761 ("selftest: net: add proc_net_pktgen")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711acb8 ("selftests: net: Add test cases for link and peer netns")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429ec2 ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d5a ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If devm_add_action_or_reset() isn't successful, xe_eu_stall_fini()
is invoked. So, unsuccessful return from devm_add_action_or_reset()
shouldn't dereference gt->eu_stall as xe_eu_stall_fini() already
frees it. Fix this issue.
Fixes: 9a0b11d4cf3b ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eae49a414a7314921108e0388810aaee6261ad92.1741800396.git.harish.chegondi@intel.com
(cherry picked from commit 278469ff569e1082d56b4a7af26fbaecef9fbf3b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
In extended linear cache(ELC) case, cxl_port_get_spa_cache_alias() helps
to get the aliased address of a SPA, it considers the first address in
CXL memory range is "region start + region cache size + 1", but it
should be "region start + region cache size".
So if a SPA is equal to "region start + region cache size", its aliased
address should be "SPA - region cache size".
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250317070124.815028-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The `struct ttm_resource->placement` contains TTM_PL_FLAG_* flags, but
it was incorrectly tested for XE_PL_* flags.
This caused xe_dma_buf_pin() to always fail when invoked for
the second time. Fix this by checking the `mem_type` field instead.
Fixes: 7764222d54b7 ("drm/xe: Disallow pinning dma-bufs in VRAM")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100353.2137964-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
(cherry picked from commit b96dabdba9b95f71ded50a1c094ee244408b2a8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
