| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few fixes:
- iwlegacy: work around large stack with clang/kasan
- mac80211: fix integer overflow
- mac80211: fix link struct init vs. RCU publish
- iwlwifi: fix warning on IFF_UP
* tag 'wireless-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
wifi: mac80211: fix beacon interval calculation overflow
wifi: iwlegacy: work around excessive stack usage on clang/kasan
====================
Link: https://patch.msgid.link/20250625115433.41381-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default, HPD was disabled on SN65DSI86 bridge. When the driver was
added (commit "a095f15c00e27"), the HPD_DISABLE bit was set in pre-enable
call which was moved to other function calls subsequently.
Later on, commit "c312b0df3b13" added detect utility for DP mode. But with
HPD_DISABLE bit set, all the HPD events are disabled[0] and the debounced
state always return 1 (always connected state).
Set HPD_DISABLE bit conditionally based on display sink's connector type.
Since the HPD_STATE is reflected correctly only after waiting for debounce
time (~100-400ms) and adding this delay in detect() is not feasible
owing to the performace impact (glitches and frame drop), remove runtime
calls in detect() and add hpd_enable()/disable() bridge hooks with runtime
calls, to detect hpd properly without any delay.
[0]: <https://www.ti.com/lit/gpn/SN65DSI86> (Pg. 32)
Fixes: c312b0df3b13 ("drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP")
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250624044835.165708-1-j-choudhary@ti.com
|
|
Each Chip-Select (CS) of a Unified Memory Controller (UMC) on AMD Zen-based
SOCs has an Address Mask and a Secondary Address Mask register associated with
it. The amd64_edac module logs DIMM sizes on a per-UMC per-CS granularity
during init using these two registers.
Currently, the module primarily considers only the Address Mask register for
computing DIMM sizes. The Secondary Address Mask register is only considered
for odd CS. Additionally, if it has been considered, the Address Mask register
is ignored altogether for that CS. For power-of-two DIMMs i.e. DIMMs whose
total capacity is a power of two (32GB, 64GB, etc), this is not an issue
since only the Address Mask register is used.
For non-power-of-two DIMMs i.e., DIMMs whose total capacity is not a power of
two (48GB, 96GB, etc), however, the Secondary Address Mask register is used
in conjunction with the Address Mask register. However, since the module only
considers either of the two registers for a CS, the size computed by the
module is incorrect. The Secondary Address Mask register is not considered for
even CS, and the Address Mask register is not considered for odd CS.
Introduce a new helper function so that both Address Mask and Secondary
Address Mask registers are considered, when valid, for computing DIMM sizes.
Furthermore, also rename some variables for greater clarity.
Fixes: 81f5090db843 ("EDAC/amd64: Support asymmetric dual-rank DIMMs")
Closes: https://lore.kernel.org/dbec22b6-00f2-498b-b70d-ab6f8a5ec87e@natrix.lt
Reported-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Žilvinas Žaltiena <zilvinas@natrix.lt>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250529205013.403450-1-avadhut.naik@amd.com
|
|
ASUS store the board name in DMI_PRODUCT_NAME rather than
DMI_PRODUCT_VERSION. (Apparently it is only Lenovo that stores the
model-name in DMI_PRODUCT_VERSION.)
Use the correct DMI identifier, DMI_PRODUCT_NAME, to match the
ASUSPRO-D840SA board, such that the quirk actually gets applied.
Cc: stable@vger.kernel.org
Reported-by: Andy Yang <andyybtc79@gmail.com>
Tested-by: Andy Yang <andyybtc79@gmail.com>
Closes: https://lore.kernel.org/linux-ide/aFb3wXAwJSSJUB7o@ryzen/
Fixes: b5acc3628898 ("ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard")
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250624074029.963028-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi-fixes: fix failure in interface up
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An earlier patch fixed a build failure with clang, but I still see the
same problem with some configurations using gcc:
drivers/gpu/drm/i915/i915_pmu.c: In function 'config_mask':
include/linux/compiler_types.h:568:38: error: call to '__compiletime_assert_462' declared with attribute error: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
drivers/gpu/drm/i915/i915_pmu.c:116:3: note: in expansion of macro 'BUILD_BUG_ON'
116 | BUILD_BUG_ON(bit >
As I understand it, the problem is that the function is not always fully
inlined, but the __builtin_constant_p() can still evaluate the argument
as being constant.
Marking it as __always_inline so far works for me in all configurations.
Fixes: a7137b1825b5 ("drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled")
Fixes: a644fde77ff7 ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620111824.3395007-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ef69f9dd1cd7301cdf04ba326ed28152a3affcf6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
If ublk_get_data() fails, -EIOCBQUEUED is returned and the current command
becomes ASYNC. And the only reason is that mapping data can't move on,
because of no enough pages or pending signal, then the current ublk request
has to be requeued.
Once the request need to be requeued, we have to setup `ublk_io` correctly,
including io->cmd and flags, otherwise the request may not be forwarded to
ublk server successfully.
Fixes: 9810362a57cb ("ublk: don't call ublk_dispatch_req() for NEED_GET_DATA")
Reported-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAGVVp+VN9QcpHUz_0nasFf5q9i1gi8H8j-G-6mkBoqa3TyjRHA@mail.gmail.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Link: https://lore.kernel.org/r/20250624104121.859519-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_queue_cmd_list() dispatches the whole batch list by scheduling task
work via the tail request's io_uring_cmd, this way is fine even though
more than one io_ring_ctx are involved for this batch since it is just
one running context.
However, the task work handler ublk_cmd_list_tw_cb() takes `issue_flags`
of tail uring_cmd's io_ring_ctx for completing all commands. This way is
wrong if any uring_cmd is issued from different io_ring_ctx.
Fixes it by always building batch IOs from same io_ring_ctx and io task
because ublk_dispatch_req() does validate task context, and IO needs to
be aborted in case of running from fallback task work context.
For typical per-queue or per-io daemon implementation, this way shouldn't
make difference from performance viewpoint, because single io_ring_ctx is
taken in each daemon for normal use case.
Fixes: d796cea7b9f3 ("ublk: implement ->queue_rqs()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250625022554.883571-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We encountered following crash when testing a XDP_REDIRECT feature
in production:
[56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd
40f30).
[56251.601413] ------------[ cut here ]------------
[56251.611357] kernel BUG at lib/list_debug.c:29!
[56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6.
3 #1
[56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE
[56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025
[56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0
[56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48
89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89
[56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246
[56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000
[56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80
[56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18
[56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000
[56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40
[56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000
[56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0
[56251.831365] PKRU: 55555554
[56251.838653] Call Trace:
[56251.845560] <IRQ>
[56251.851943] cpu_map_enqueue.cold+0x5/0xa
[56251.860243] xdp_do_redirect+0x2d9/0x480
[56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en]
[56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en]
[56251.885665] ? cpu_max_write+0x1e/0x100
[56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en]
[56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en]
[56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.944250] __napi_poll+0x2b/0x160
[56251.951155] bpf_trampoline_6442548651+0x79/0x123
[56251.959262] __napi_poll+0x5/0x160
[56251.966037] net_rx_action+0x3d2/0x880
[56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.989262] ? __hrtimer_run_queues+0x162/0x2a0
[56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en]
[56252.019903] handle_softirqs+0xcf/0x270
[56252.026650] irq_exit_rcu+0x67/0x90
[56252.032933] common_interrupt+0x85/0xa0
[56252.039498] </IRQ>
[56252.044246] <TASK>
[56252.048935] asm_common_interrupt+0x26/0x40
[56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420
[56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae
01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29
[56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202
[56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000
[56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000
[56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e
[56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860
[56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000
[56252.146667] ? cpuidle_enter_state+0xab/0x420
[56252.153909] cpuidle_enter+0x2d/0x40
[56252.160360] do_idle+0x176/0x1c0
[56252.166456] cpu_startup_entry+0x29/0x30
[56252.173248] start_secondary+0xf7/0x100
[56252.179941] common_startup_64+0x13e/0x141
[56252.186886] </TASK>
From the crash dump, we found that the cpu_map_flush_list inside
redirect info is partially corrupted: its list_head->next points to
itself, but list_head->prev points to a valid list of unflushed bq
entries.
This turned out to be a result of missed XDP flush on redirect lists. By
digging in the actual source code, we found that
commit 7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX
ring structures") incorrectly overwrites the event mask for XDP_REDIRECT
in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX
and XDP_REDIRECT randomly for incoming packets in a naive XDP program.
Properly propagate the XDP_REDIRECT events back fixes the crash.
Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers")
Tested-by: Andrew Rzeznik <arzeznik@cloudflare.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Link: https://patch.msgid.link/aFl7jpCNzscumuN2@debian.debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prevent other bits of mailbox power limit from being overwritten with 0.
This issue was due to a missing read and modify of current power limit,
before setting a requested mailbox power limit, which is added in this
patch.
v2:
- Improve commit message. (Anshuman)
v3:
- Rebase.
- Rephrase commit message. (Riana)
- Add read-modify-write variant of xe_hwmon_pcode_write_power_limit()
i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal)
- Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits.
- Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits
writes use xe_hwmon_pcode_rmw_power_limit() only.
v4:
- Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever
applicable. (Riana)
Fixes: 25a2aa779fc3 ("drm/xe/hwmon: Add support to manage power limits though mailbox")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8aa7306631f088881759398972d503757cf0c901)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add check for the return value of alloc_ordered_workqueue()
in xe_display_create() to catch potential exception.
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/4ee1b0e5d1626ce1dde2e82af05c2edaed50c3aa.1747397638.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5b62d63395d5b7d4094e7cd380bccae4b25415cb)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The `st,spi-midi-ns` property, which was used to set a nanosecond delay
between transferred words, is now deprecated.
This functionality is now supported by the SPI framework through the
`spi_transfer` struct's `word_delay` variable.
Therefore, the private `st,spi-midi-ns` property is no longer needed and
has been deprecated in favor of the generic solution.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-5-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The STM32 DMA doesn't have the ability to generate convenient burst
transfer on the DDR, ensuring the best load of the AXI & DDR.
To avoid this bad load of the AXI & DDR, STM32 MDMA can be used to transfer
data to the DDR, being triggered by STM32 DMA channel transfer
completion.
An SRAM buffer is used between DMA and MDMA. So the MDMA always does
MEM_TO_MEM transfers (from/to SRAM to/from DDR), and the DMA uses SRAM
instead of DDR with DEV_TO_MEM transfers.
SPI RX DMA (DEV_TO_MEM) becomes:
SPI RX FIFO ==DMA==> SRAM ==MDMA==> DDR
In RX (DEV_TO_MEM), EOT interrupt is used to pause the DMA channel (which
will raise a transfer complete) to trigger the MDMA to flush the SRAM (when
transfer length is not aligned on SRAM period).
TX remains on the former implementation.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-4-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The stm32_spi_probe function now includes a check to ensure that the
pointer returned by of_device_get_match_data is not NULL before
accessing its members. This resolves a warning where a potential NULL
pointer dereference could occur when accessing cfg->has_device_mode.
Before accessing the 'has_device_mode' member, we verify that 'cfg' is
not NULL. If 'cfg' is NULL, an error message is logged.
This change ensures that the driver does not attempt to access
configuration data if it is not available, thus preventing a potential
system crash due to a NULL pointer dereference.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310191831.MLwx1c6x-lkp@intel.com/
Fixes: fee681646fc8 ("spi: stm32: disable device mode with st,stm32f4-spi compatible")
Link: https://patch.msgid.link/20250616-spi-upstream-v1-2-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The spi ready functionality is supported by our peripheral in host and
target modes on STM32MP2x SoCs.
Update our spi controller driver to allow devices to use this
functionality.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://patch.msgid.link/20250616-spi-upstream-v1-1-7e8593f3f75d@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Having PM put sync in remove function is causing PM underflow during
remove operation. This is caused by the function, runtime_pm_get_sync,
not being called anywhere during the op. Ensure that calls to
pm_runtime_enable()/pm_runtime_disable() and
pm_runtime_get_sync()/pm_runtime_put_sync() match.
echo 108d2000.spi > /sys/bus/platform/drivers/cadence-qspi/unbind
[ 49.644256] Deleting MTD partitions on "108d2000.spi.0":
[ 49.649575] Deleting u-boot MTD partition
[ 49.684087] Deleting root MTD partition
[ 49.724188] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
Continuous bind/unbind will result in an "Unbalanced pm_runtime_enable" error.
Subsequent unbind attempts will return a "No such device" error, while bind
attempts will return a "Resource temporarily unavailable" error.
[ 47.592434] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 49.592233] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 53.232309] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 55.828550] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 57.940627] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 59.912490] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 61.876243] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 61.883000] platform 108d2000.spi: Unbalanced pm_runtime_enable!
[ 532.012270] cadence-qspi 108d2000.spi: probe with driver cadence-qspi failed1
Also, change clk_disable_unprepare() to clk_disable() since continuous
bind and unbind operations will trigger a warning indicating that the clock is
already unprepared.
Fixes: 4892b374c9b7 ("mtd: spi-nor: cadence-quadspi: Add runtime PM support")
cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/4e7a4b8aba300e629b45a04f90bddf665fbdb335.1749601877.git.khairul.anuar.romli@altera.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When EDID is retrieved via drm_edid_raw(), it doesn't guarantee to
return proper EDID bytes the caller wants: it may be either NULL (that
leads to an Oops) or with too long bytes over the fixed size raw_edid
array (that may lead to memory corruption). The latter was reported
actually when connected with a bad adapter.
Add sanity checks for drm_edid_raw() to address the above corner
cases, and return EDID_BAD_INPUT accordingly.
Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1236415
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 648d3f4d209725d51900d6a3ed46b7b600140cdf)
Cc: stable@vger.kernel.org
|
|
[Why]
commit 16dc8bc27c2a ("drm/amd/display: Export full brightness range to
userspace") adjusted the brightness range to scale to larger values, but
missed updating AMDGPU_MAX_BL_LEVEL which is needed to make sure that
scaling works properly with custom brightness curves.
[How]
As the change for max brightness of 0xFFFF only applies to devices
supporting DC, use existing DC define MAX_BACKLIGHT_LEVEL.
Fixes: 16dc8bc27c2a ("drm/amd/display: Export full brightness range to userspace")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250623171114.1156451-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5b852044eb0d3e1f1c946d32e05fcb068e0a20a0)
Cc: stable@vger.kernel.org
|
|
SDMA 7.0.0/1: 7836028
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8c011408ed842dfccdd50a90a9cf6bccdb85cc0e)
|
|
SDMA 6.0.0 version 24
SDMA 6.0.2 version 21
SDMA 6.0.3 version 25
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e8cca30d8b34f1c4101c237914c53068d4a55e73)
|
|
commit 017fbb6690c2 ("drm/amdgpu/discovery: check ip_discovery fw file
available") added support for reading an amdgpu IP discovery bin file
for some specific products. If it's not found then it will fallback to
hardcoded values. However if it's not found there is also a lot of noise
about missing files and errors.
Adjust the error handling to decrease most messages to DEBUG and to show
users less about missing files.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4312
Tested-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Fixes: 017fbb6690c2 ("drm/amdgpu/discovery: check ip_discovery fw file available")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250617183052.1692059-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 49f1f9f6c3c9febf8ba93f94a8d9c8d03e1ea0a1)
|
|
Seems some older MES firmware versions do not properly support
this packet. Add back some the compatibility checks.
v2: switch to fw version check (Shaoyun)
Fixes: f81cd793119e ("drm/amd/amdgpu: Fix MES init sequence")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4295
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: shaoyun.liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0180e0a5dd5c6ff118043ee42dbbbddaf881f283)
Cc: stable@vger.kernel.org
|
|
Enable the cleaner shader for other GFX9.x series of GPUs to provide
data isolation between GPU workloads. The cleaner shader is responsible
for clearing the Local Data Store (LDS), Vector General Purpose
Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which
helps prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX9.x GPUs, previously
available for GFX9.4.2. It enhances security by clearing GPU memory
between processes and maintains a consistent GPU state across KGD and
KFD workloads.
Cc: Manu Rastogi <manu.rastogi@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99808926d0ea6234a89e35240a7cb088368de9e1)
|
|
Commit 7a637784d517 ("serial: imx: reduce RX interrupt frequency")
introduced a regression on the i.MX6UL EVK board. The issue can be
reproduced with the following steps:
- Open vi on the board.
- Paste a text file (~150 characters).
- Save the file, then repeat the process.
- Compare the sha256sum of the saved files.
The checksums do not match due to missing characters or entire lines.
Fix this by restoring the RXTL value to 1 when the UART is used as a
console.
This ensures timely RX interrupts and reliable data reception in console
mode.
With this change, pasted content is saved correctly, and checksums are
always consistent.
Cc: stable <stable@kernel.org>
Fixes: 7a637784d517 ("serial: imx: reduce RX interrupt frequency")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250619114617.2791939-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for dedicated DMA interrupt vectors for each SPI hardware
instance in the pci1xxxx driver. This improves scalability and interrupt
handling for systems using multiple SPI instances with DMA.
Introduce a constant `NUM_VEC_PER_INST` to define the number of IRQ
vectors per instance (main, DMA write, DMA read). Update the
`pci1xxxx_spi_internal` structure to use an IRQ array.
Refactor IRQ allocation and DMA initialization logic:
- Assign separate IRQ vectors for DMA read and write interrupts.
- Split the original DMA ISR into two handlers:
`pci1xxxx_spi_isr_dma_rd` and `pci1xxxx_spi_isr_dma_wr`.
- Configure IMWR registers per instance using cached MSI data.
- Move DMA register configuration into a new helper function,
`pci1xxxx_spi_dma_config()`.
Invoke the DMA initialization after all instances are configured to
ensure correct IRQ vector mapping.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250624033028.74389-1-thangaraj.s@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- L2CAP: Fix L2CAP MTU negotiation
- hci_core: Fix use-after-free in vhci_flush()
- btintel_pcie: Fix potential race condition in firmware download
- hci_qca: fix unable to load the BT driver
* tag 'for-net-2025-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
driver: bluetooth: hci_qca:fix unable to load the BT driver
Bluetooth: L2CAP: Fix L2CAP MTU negotiation
Bluetooth: btintel_pcie: Fix potential race condition in firmware download
====================
Link: https://patch.msgid.link/20250623165405.227619-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Unfortunately, FWs of some devices don't have the version of the
iwl_mac_config_cmd defined in the TLVs. We send 0 as the 'def argument
to iwl_fw_lookup_cmd_ver, so for such FWs, the return value will be 0,
leading to a warning, and to not sending the command.
Fix this by assuming that the default version is 1.
Fixes: 83f3ac2848b4 ("wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250624071427.2662621-1-miriam.rachel.korenblit@intel.com
|
|
In some rare randconfig builds, I seem to trigger a bug in clang where
it unrolls a loop but then runs out of registers, which then get
spilled to the stack:
net/wireless/intel/iwlegacy/4965-rs.c:2262:1: error: stack frame size (1696) exceeds limit (1280) in 'il4965_rs_rate_init' [-Werror,-Wframe-larger-than]
This seems to be the same one I saw in the omapdrm driver, and there is
an easy workaround by not inlining the il4965_rs_rate_scale_clear_win
function.
Link: https://github.com/llvm/llvm-project/issues/143908
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20250620113946.3987160-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Change error values of `ionic_tx_map_single()` and `ionic_tx_map_frag()`
from 0 to `DMA_MAPPING_ERROR` to prevent collision with 0 as a valid
address.
This also fixes the use of `dma_mapping_error()` to test against 0 in
`ionic_xdp_post_frame()`
Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Fixes: 56e41ee12d2d ("ionic: better dma-map error handling")
Fixes: ac8813c0ab7d ("ionic: convert Rx queue buffers to use page_pool")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20250619094538.283723-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Conor Dooley <conor@kernel.org>:
This is a v2 of a patchset I sent about this time last year, adding the
regular transfer_one_message op to the microchip-core-qspi driver. In that
v1 Mark expressed his dislike for that op, so v2 is using
prepare/unprepare/transfer_one instead. The unprepare implementation still
contains the 750 us delay that the driver had back in v1. I've heard a
suggestion internally as to why this is needed, but it was unsubstantiated,
so I still have no justification for it. I held off on sending a v2 because
of a lack of explanation for the delay, but I don't wanna hold off forever
for something I might never understand.
|
|
The bridge used in drm_connector_hdmi_audio_init() does not correctly
point to the required audio bridge, which lead to incorrect audio
configuration input.
Fixes: 231adeda9f67 ("drm/bridge-connector: hook DisplayPort audio support")
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250620011616.118-1-kernel@airkyi.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-crypt: fix a crash on 32-bit machines
- dm-raid: replace "rdev" with correct loop variable name "r"
* tag 'for-6.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-raid: fix variable in journal device check
dm-crypt: Extend state buffer size in crypt_iv_lmk_one
|
|
The driver for CoreQSPI only supports memory operations at present, so
add support for regular transfers so that the SD card slot and ADC on
the BeagleV Fire can be used.
Signed-off-by: Cyril Jean <cyril.jean@microchip.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250620-splice-shelter-310771564886@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
"word" is unused in mchp_coreqspi_write_op(), so delete it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250620-starry-excusably-25e6be957d9d@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The controller's minimum possible bus clock is 1/30 the rate of the
input clock. Naively set the minimum bus clock speed the controller
is capable of during probe, assuming that the rate will never reduce
further.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250620-drained-widen-ac311bd5f172@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit 631b2af2f357 ("PCI/ACPI: Fix allocated memory release
on error in pci_acpi_scan_root()").
The reverted patch causes the 'ri->cfg' and 'root_ops' resources to be
released multiple times.
When acpi_pci_root_create() fails, these resources have already been
released internally by the __acpi_pci_root_release_info() function.
Releasing them again in pci_acpi_scan_root() leads to incorrect behavior
and potential memory issues.
We plan to resolve the issue using a more appropriate fix.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aEmdnuw715btq7Q5@stanley.mountain/
Signed-off-by: Zhe Qiao <qiaozhe@iscas.ac.cn>
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250619072608.2075475-1-qiaozhe@iscas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Otherwise, the following build error will happen for CONFIG_DEBUG_FS=n &&
CONFIG_PCIE_PTM=y:
drivers/pci/pcie/ptm.c:498:25: error: redefinition of 'pcie_ptm_create_debugfs'
498 | struct pci_ptm_debugfs *pcie_ptm_create_debugfs(struct device *dev, void *pdata,
| ^
./include/linux/pci.h:1915:2: note: previous definition is here
1915 | *pcie_ptm_create_debugfs(struct device *dev, void *pdata,
| ^
drivers/pci/pcie/ptm.c:546:6: error: redefinition of 'pcie_ptm_destroy_debugfs'
546 | void pcie_ptm_destroy_debugfs(struct pci_ptm_debugfs *ptm_debugfs)
| ^
./include/linux/pci.h:1918:1: note: previous definition is here
1918 | pcie_ptm_destroy_debugfs(struct pci_ptm_debugfs *ptm_debugfs) { }
|
Fixes: 132833405e61 ("PCI: Add debugfs support for exposing PTM context")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Closes: https://lore.kernel.org/linux-pci/20250607025506.GA16607@sol
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250608033305.15214-1-manivannan.sadhasivam@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 7 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels. Only 4 are
for MM.
- The series `Revert "bcache: update min_heap_callbacks to use
default builtin swap"' from Kuan-Wei Chiu backs out the author's
recent min_heap changes due to a performance regression.
A fix for this regression has been developed but we felt it best to
go back to the known-good version to give the new code more bake
time.
- A lot of MAINTAINERS maintenance.
I like to get these changes upstreamed promptly because they can't
break things and more accurate/complete MAINTAINERS info hopefully
improves the speed and accuracy of our responses to submitters and
reporters"
* tag 'mm-hotfixes-stable-2025-06-22-18-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add additional mmap-related files to mmap section
MAINTAINERS: add memfd, shmem quota files to shmem section
MAINTAINERS: add stray rmap file to mm rmap section
MAINTAINERS: add hugetlb_cgroup.c to hugetlb section
MAINTAINERS: add further init files to mm init block
MAINTAINERS: update maintainers for HugeTLB
maple_tree: fix MA_STATE_PREALLOC flag in mas_preallocate()
MAINTAINERS: add missing test files to mm gup section
MAINTAINERS: add missing mm/workingset.c file to mm reclaim section
selftests/mm: skip uprobe vma merge test if uprobes are not enabled
bcache: remove unnecessary select MIN_HEAP
Revert "bcache: remove heap-related macros and switch to generic min_heap"
Revert "bcache: update min_heap_callbacks to use default builtin swap"
selftests/mm: add configs to fix testcase failure
kho: initialize tail pages for higher order folios properly
MAINTAINERS: add linux-mm@ list to Kexec Handover
mm: userfaultfd: fix race of userfaultfd_move and swap cache
mm/gup: revert "mm: gup: fix infinite loop within __get_longterm_locked"
selftests/mm: increase timeout from 180 to 900 seconds
mm/shmem, swap: fix softlockup with mTHP swapin
|
|
Replace "rdev" with correct loop variable name "r".
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 63c32ed4afc2 ("dm raid: add raid4/5/6 journaling support")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
clang gets a bit confused by the code in the qed_mfw_process_tlv_req and
ends up spilling registers to the stack hundreds of times. When sanitizers
are enabled, this can end up blowing the stack warning limit:
drivers/net/ethernet/qlogic/qed/qed_mng_tlv.c:1244:5: error: stack frame size (1824) exceeds limit (1280) in 'qed_mfw_process_tlv_req' [-Werror,-Wframe-larger-than]
Apparently the problem is the complexity of qed_mfw_update_tlvs()
after inlining, and marking the four main branches of that function
as noinline_for_stack makes this problem completely go away, the stack
usage goes down to 100 bytes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reading DPCD registers has side-effects in general. In particular
accessing registers outside of the link training register range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly
forbidden by the DP v2.1 Standard, see
3.6.5.1 DPTX AUX Transaction Handling Mandates
3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates
Based on my tests, accessing the DPCD_REV register during the link
training of an UHBR TBT DP tunnel sink leads to link training failures.
Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the
DPCD register access quirk.
Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
(cherry picked from commit a40c5d727b8111b5db424a1e43e14a1dcce1e77f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
DIV_ROUND_CLOSEST_ULL uses do_div(), which expects a 32-bit divisor.
When passing a 64-bit constant like CURVE2_MULTIPLIER, the value is
silently truncated to u32, potentially leading to incorrect results
on large divisors.
Replace DIV_ROUND_CLOSEST_ULL with DIV64_U64_ROUND_CLOSEST which correctly
handles full 64-bit division.
v2: Use DIV64_U64_ROUND_CLOSEST instead of div64_u64 macro. (Jani)
Fixes: 5947642004bf ("drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2")
Reported-by: Vas Novikov <vasya.novikov@gmail.com>
Closes: https://lore.kernel.org/all/8d7c7958-9558-4c8a-a81a-e9310f2d8852@gmail.com/
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Vas Novikov <vasya.novikov@gmail.com>
Cc: stable@vger.kernel.org # v6.15+
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250618130951.1596587-2-ankit.k.nautiyal@intel.com
(cherry picked from commit b300a175a11e6a934d728317dc39787723cc7917)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Add a macro CRYPTO_MD5_STATESIZE for the Crypto API export state
size of md5 and use that in dm-crypt instead of relying on the
size of struct md5_state (the latter is currently undergoing a
transition and may shrink).
This commit fixes a crash on 32-bit machines:
Oops: Oops: 0000 [#1] SMP
CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.16.0-rc2+ #993 PREEMPT(full)
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Workqueue: kcryptd-254:0-1 kcryptd_crypt [dm_crypt]
EIP: __crypto_shash_export+0xf/0x90
Code: 4a c1 c7 40 20 a0 b4 4a c1 81 cf 0e 00 04 08 89 78 50 e9 2b ff ff ff 8d 74 26 00 55 89 e5 57 56 53 89 c3 89 d6 8b 00 8b 40 14 <8b> 50 fc f6 40 13 01 74 04 4a 2b 50 14 85 c9 74 10 89 f2 89 d8 ff
EAX: 303a3435 EBX: c3007c90 ECX: 00000000 EDX: c3007c38
ESI: c3007c38 EDI: c3007c90 EBP: c3007bfc ESP: c3007bf0
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010216
CR0: 80050033 CR2: 303a3431 CR3: 04fbe000 CR4: 00350e90
Call Trace:
crypto_shash_export+0x65/0xc0
crypt_iv_lmk_one+0x106/0x1a0 [dm_crypt]
Fixes: efd62c85525e ("crypto: md5-generic - Use API partial block handling")
Reported-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Milan Broz <gmazyland@gmail.com>
Closes: https://lore.kernel.org/linux-crypto/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com/T/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The drm_writeback_connector_cleanup have the signature:
static void drm_writeback_connector_cleanup(
struct drm_device *dev,
struct drm_writeback_connector *wb_connector)
But it is stored and used as a drmres_release_t
typedef void (*drmres_release_t)(struct drm_device *dev, void *res);
While the current code is valid and does not produce any warning, the
CFI runtime check (CONFIG_CFI_CLANG) can fail because the function
signature is not the same as drmres_release_t.
In order to fix this, change the function signature to match what is
expected by drmres_release_t.
Fixes: 1914ba2b91ea ("drm: writeback: Create drmm variants for drm_writeback_connector initialization")
Suggested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250429-drm-fix-writeback-cleanup-v2-1-548ff3a4e284@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- subsystem: convert drivers to use recent callbacks of struct
i2c_algorithm A typical after-rc1 cleanup, which I couldn't send in
time for rc2
- tegra: fix YAML conversion of device tree bindings
- k1: re-add a check which got lost during upstreaming
* tag 'i2c-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: k1: check for transfer error
i2c: use inclusive callbacks in struct i2c_algorithm
dt-bindings: i2c: nvidia,tegra20-i2c: Specify the required properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix missing prototypes warnings
- Properly initialize work context when allocating it
- Remove a method tracking when managed interrupts are suspended during
hotplug, in favor of the code using a IRQ disable depth tracking now,
and have interrupts get properly enabled again on restore
- Make sure multiple CPUs getting hotplugged don't cause wrong tracking
of the managed IRQ disable depth
* tag 'irq_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ath79-misc: Fix missing prototypes warnings
genirq/irq_sim: Initialize work context pointers properly
genirq/cpuhotplug: Restore affinity even for suspended IRQ
genirq/cpuhotplug: Rebalance managed interrupts across multi-CPU hotplug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- amd64: Correct the number of memory controllers on some AMD Zen
clients
- igen6: Handle firmware-disabled memory controllers properly
* tag 'edac_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Fix NULL pointer dereference
EDAC/amd64: Correct number of UMCs for family 19h models 70h-7fh
|
|
If spacemit_i2c_xfer_msg() times out waiting for a message transfer to
complete, or if the hardware reports an error, it returns a negative
error code (-ETIMEDOUT, -EAGAIN, -ENXIO. or -EIO).
The sole caller of spacemit_i2c_xfer_msg() is spacemit_i2c_xfer(),
which is the i2c_algorithm->xfer callback function. It currently
does not save the value returned by spacemit_i2c_xfer_msg().
The result is that transfer errors go unreported, and a caller
has no indication anything is wrong.
When this code was out for review, the return value *was* checked
in early versions. But for some reason, that assignment got dropped
between versions 5 and 6 of the series, perhaps related to reworking
the code to merge spacemit_i2c_xfer_core() into spacemit_i2c_xfer().
Simply assigning the value returned to "ret" fixes the problem.
Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Alex Elder <elder@riscstar.com>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Troy Mitchell <troymitchell988@gmail.com>
Link: https://lore.kernel.org/r/20250616125137.1555453-1-elder@riscstar.com
Signed-off-by: Andi Shyti <andi@smida.it>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a crash in ACPICA while attempting to evaluate a control method
that expects more arguments than are being passed to it, which was
exposed by a defective firmware update from a prominent OEM on
multiple systems (Rafael Wysocki)"
* tag 'acpi-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Refuse to evaluate a method if arguments are missing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Set up runtime PM even for devices that lack a PM Capability as we
did before 4d4c10f763d7 ("PCI: Explicitly put devices into D0 when
initializing"), which broke resume in some VFIO scenarios (Mario
Limonciello)
- Ignore pciehp Presence Detect Changed events caused by DPC, even if
they occur after a Data Link Layer State Changed event, to fix a VFIO
GPU passthrough regression in v6.13 (Lukas Wunner)
* tag 'pci-v6.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: pciehp: Ignore belated Presence Detect Changed caused by DPC
PCI/PM: Set up runtime PM even for devices without PCI PM
|
