summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-05-28habanalabs: fix bug in checking huge page optimizationOded Gabbay
This patch fix a bug in the mmu code that checks whether we can use huge page mappings for host pages. The code is supposed to enable huge page mappings only if ALL DMA addresses are aligned to 2MB AND the number of pages in each DMA chunk is a modulo of the number of pages in 2MB. However, the code ignored the first requirement for the first DMA chunk. This patch fix that issue by making sure the requirement of address alignment is validated against all DMA chunks. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-05-31Merge tag 'misc-habanalabs-fixes-2019-05-24' of ↵Greg Kroah-Hartman
git://people.freedesktop.org/~gabbayo/linux into char-misc-linus Oded writes: This tag contains the following fixes: - Halt debug engines when user process closes the FD. We can't allow the device to issue transactions for a user which doesn't exists anymore. - Fix various security holes in debugfs API. - Add a new opcode to the DEBUG IOCTL API. The opcode is designed for setting the device into and out of debug mode. Although not a fix per-se, because this is a new IOCTL which is upstreamed in kernel 5.2, I think this is justified at this point because we won't be able to change the API later. - Fix a bug where the code used an uninitialized mutex * tag 'misc-habanalabs-fixes-2019-05-24' of git://people.freedesktop.org/~gabbayo/linux: habanalabs: Avoid using a non-initialized MMU cache mutex habanalabs: fix debugfs code uapi/habanalabs: add opcode for enable/disable device debug mode habanalabs: halt debug engines on user process close
2019-05-30fpga: zynqmp-fpga: Correctly handle error pointerMoritz Fischer
Fixes the following static checker errors: drivers/fpga/zynqmp-fpga.c:50 zynqmp_fpga_ops_write() error: 'eemi_ops' dereferencing possible ERR_PTR() drivers/fpga/zynqmp-fpga.c:84 zynqmp_fpga_ops_state() error: 'eemi_ops' dereferencing possible ERR_PTR() Note: This does not handle the EPROBE_DEFER value in a special manner. Fixes commit c09f7471127e ("fpga manager: Adding FPGA Manager support for Xilinx zynqmp") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-28mmc: sdhci: Fix SDIO IRQ thread deadlockAdrian Hunter
Since commit c07a48c26519 ("mmc: sdhci: Remove finish_tasklet"), the IRQ thread might be used to complete requests, but the IRQ thread is also used to process SDIO card interrupts. This can cause a deadlock when the SDIO processing tries to access the card since that would also require the IRQ thread. Change SDHCI to use sdio_signal_irq() to schedule a work item instead. That also requires implementing the ->ack_sdio_irq() mmc host op. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: c07a48c26519 ("mmc: sdhci: Remove finish_tasklet") Reported-by: Brian Masney <masneyb@onstation.org> Tested-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-28dpaa_eth: use only online CPU portalsMadalin Bucur
Make sure only the portals for the online CPUs are used. Without this change, there are issues when someone boots with maxcpus=n, with n < actual number of cores available as frames either received or corresponding to the transmit confirmation path would be offered for dequeue to the offline CPU portals, getting lost. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28net: mvneta: Fix err code path of probeJisheng Zhang
Fix below issues in err code path of probe: 1. we don't need to unregister_netdev() because the netdev isn't registered. 2. when register_netdev() fails, we also need to destroy bm pool for HWBM case. Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28net: stmmac: Do not output error on deferred probeThierry Reding
If the subdriver defers probe, do not show an error message. It's perfectly fine for this error to occur since the driver will get another chance to probe after some time and will usually succeed after all of the resources that it requires have been registered. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28Merge tag 'pinctrl-v5.2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "The commits that stand out are the Intel fixes that arrived during the merge window and I got relayed by pull request from Andy. Apart from that a minor Kconfig noise. - Interrupt clearing fix for the Intel pin controllers affecting touchpads on some laptops. - Compile Kconfig fix for the STMFX expander pin controller" * tag 'pinctrl-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: stmfx: Fix compile issue when CONFIG_OF_GPIO is not defined pinctrl: intel: Clear interrupt status in mask/unmask callback pinctrl: intel: Use GENMASK() consistently
2019-05-28Merge tag 'gpio-v5.2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "Fix a build error in gpio-adp5588" * tag 'gpio-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: fix gpio-adp5588 build errors
2019-05-28s390/zcrypt: Fix wrong dispatching for control domain CPRBsHarald Freudenberger
The zcrypt device driver does not handle CPRBs which address a control domain correctly. This fix introduces a workaround: The domain field of the request CPRB is checked if there is a valid domain value in there. If this is true and the value is a control only domain (a domain which is enabled in the crypto config ADM mask but disabled in the AQM mask) the CPRB is forwarded to the default usage domain. If there is no default domain, the request is rejected with an ENODEV. This fix is important for maintaining crypto adapters. For example one LPAR can use a crypto adapter domain ('Control and Usage') but another LPAR needs to be able to maintain this adapter domain ('Control'). Scenarios like this did not work properly and the patch enables this. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-05-28rtw88: Make some symbols staticYueHaibing
Fix sparse warnings: drivers/net/wireless/realtek/rtw88/phy.c:851:4: warning: symbol 'rtw_cck_size' was not declared. Should it be static? drivers/net/wireless/realtek/rtw88/phy.c:852:4: warning: symbol 'rtw_ofdm_size' was not declared. Should it be static? drivers/net/wireless/realtek/rtw88/phy.c:853:4: warning: symbol 'rtw_ht_1s_size' was not declared. Should it be static? drivers/net/wireless/realtek/rtw88/phy.c:854:4: warning: symbol 'rtw_ht_2s_size' was not declared. Should it be static? drivers/net/wireless/realtek/rtw88/phy.c:855:4: warning: symbol 'rtw_vht_1s_size' was not declared. Should it be static? drivers/net/wireless/realtek/rtw88/phy.c:856:4: warning: symbol 'rtw_vht_2s_size' was not declared. Should it be static? drivers/net/wireless/realtek/rtw88/fw.c:11:6: warning: symbol 'rtw_fw_c2h_cmd_handle_ext' was not declared. Should it be static? drivers/net/wireless/realtek/rtw88/fw.c:50:6: warning: symbol 'rtw_fw_send_h2c_command' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-28rtw88: avoid circular locking between local->iflist_mtx and rtwdev->mutexStanislaw Gruszka
Remove circular lock dependency by using atomic version of interfaces iterate in watch_dog_work(), hence avoid taking local->iflist_mtx (rtw_vif_watch_dog_iter() only update some data, it can be called from atomic context). Fixes below LOCKDEP warning: [ 1157.219415] ====================================================== [ 1157.225772] [ INFO: possible circular locking dependency detected ] [ 1157.232150] 3.10.0-1043.el7.sgruszka1.x86_64.debug #1 Not tainted [ 1157.238346] ------------------------------------------------------- [ 1157.244635] kworker/u4:2/14490 is trying to acquire lock: [ 1157.250194] (&rtwdev->mutex){+.+.+.}, at: [<ffffffffc098322b>] rtw_ops_config+0x2b/0x90 [rtw88] [ 1157.259151] but task is already holding lock: [ 1157.265085] (&local->iflist_mtx){+.+...}, at: [<ffffffffc0b8ab7a>] ieee80211_mgd_probe_ap.part.28+0xca/0x160 [mac80211] [ 1157.276169] which lock already depends on the new lock. [ 1157.284488] the existing dependency chain (in reverse order) is: [ 1157.292101] -> #2 (&local->iflist_mtx){+.+...}: [ 1157.296919] [<ffffffffbc741a29>] lock_acquire+0x99/0x1e0 [ 1157.302955] [<ffffffffbce72793>] mutex_lock_nested+0x93/0x410 [ 1157.309416] [<ffffffffc0b6038f>] ieee80211_iterate_interfaces+0x2f/0x60 [mac80211] [ 1157.317730] [<ffffffffc09811ab>] rtw_watch_dog_work+0xcb/0x130 [rtw88] [ 1157.325003] [<ffffffffbc6d77bc>] process_one_work+0x22c/0x720 [ 1157.331481] [<ffffffffbc6d7dd6>] worker_thread+0x126/0x3b0 [ 1157.337589] [<ffffffffbc6e107f>] kthread+0xef/0x100 [ 1157.343260] [<ffffffffbce848b7>] ret_from_fork_nospec_end+0x0/0x39 [ 1157.350091] -> #1 ((&(&rtwdev->watch_dog_work)->work)){+.+...}: [ 1157.356314] [<ffffffffbc741a29>] lock_acquire+0x99/0x1e0 [ 1157.362427] [<ffffffffbc6d570b>] flush_work+0x5b/0x310 [ 1157.368287] [<ffffffffbc6d740e>] __cancel_work_timer+0xae/0x170 [ 1157.374940] [<ffffffffbc6d7583>] cancel_delayed_work_sync+0x13/0x20 [ 1157.381930] [<ffffffffc0982b49>] rtw_core_stop+0x29/0x50 [rtw88] [ 1157.388679] [<ffffffffc098bee6>] rtw_enter_ips+0x16/0x20 [rtw88] [ 1157.395428] [<ffffffffc0983242>] rtw_ops_config+0x42/0x90 [rtw88] [ 1157.402173] [<ffffffffc0b13343>] ieee80211_hw_config+0xc3/0x680 [mac80211] [ 1157.409854] [<ffffffffc0b3925b>] ieee80211_do_open+0x69b/0x9c0 [mac80211] [ 1157.417418] [<ffffffffc0b395e9>] ieee80211_open+0x69/0x70 [mac80211] [ 1157.424496] [<ffffffffbcd03442>] __dev_open+0xe2/0x160 [ 1157.430356] [<ffffffffbcd03773>] __dev_change_flags+0xa3/0x180 [ 1157.436922] [<ffffffffbcd03879>] dev_change_flags+0x29/0x60 [ 1157.443224] [<ffffffffbcda14c4>] devinet_ioctl+0x794/0x890 [ 1157.449331] [<ffffffffbcda27b5>] inet_ioctl+0x75/0xa0 [ 1157.455087] [<ffffffffbccd54eb>] sock_do_ioctl+0x2b/0x60 [ 1157.461178] [<ffffffffbccd5753>] sock_ioctl+0x233/0x310 [ 1157.467109] [<ffffffffbc8bd820>] do_vfs_ioctl+0x410/0x6c0 [ 1157.473233] [<ffffffffbc8bdb71>] SyS_ioctl+0xa1/0xc0 [ 1157.478914] [<ffffffffbce84a5e>] system_call_fastpath+0x25/0x2a [ 1157.485569] -> #0 (&rtwdev->mutex){+.+.+.}: [ 1157.490022] [<ffffffffbc7409d1>] __lock_acquire+0xec1/0x1630 [ 1157.496305] [<ffffffffbc741a29>] lock_acquire+0x99/0x1e0 [ 1157.502413] [<ffffffffbce72793>] mutex_lock_nested+0x93/0x410 [ 1157.508890] [<ffffffffc098322b>] rtw_ops_config+0x2b/0x90 [rtw88] [ 1157.515724] [<ffffffffc0b13343>] ieee80211_hw_config+0xc3/0x680 [mac80211] [ 1157.523370] [<ffffffffc0b8a4ca>] ieee80211_recalc_ps.part.27+0x9a/0x180 [mac80211] [ 1157.531685] [<ffffffffc0b8abc5>] ieee80211_mgd_probe_ap.part.28+0x115/0x160 [mac80211] [ 1157.540353] [<ffffffffc0b8b40d>] ieee80211_beacon_connection_loss_work+0x4d/0x80 [mac80211] [ 1157.549513] [<ffffffffbc6d77bc>] process_one_work+0x22c/0x720 [ 1157.555886] [<ffffffffbc6d7dd6>] worker_thread+0x126/0x3b0 [ 1157.562170] [<ffffffffbc6e107f>] kthread+0xef/0x100 [ 1157.567765] [<ffffffffbce848b7>] ret_from_fork_nospec_end+0x0/0x39 [ 1157.574579] other info that might help us debug this: [ 1157.582788] Chain exists of: &rtwdev->mutex --> (&(&rtwdev->watch_dog_work)->work) --> &local->iflist_mtx [ 1157.593024] Possible unsafe locking scenario: [ 1157.599046] CPU0 CPU1 [ 1157.603653] ---- ---- [ 1157.608258] lock(&local->iflist_mtx); [ 1157.612180] lock((&(&rtwdev->watch_dog_work)->work)); [ 1157.620074] lock(&local->iflist_mtx); [ 1157.626555] lock(&rtwdev->mutex); [ 1157.630124] *** DEADLOCK *** [ 1157.636148] 4 locks held by kworker/u4:2/14490: [ 1157.640755] #0: (%s#6){.+.+.+}, at: [<ffffffffbc6d774a>] process_one_work+0x1ba/0x720 [ 1157.648965] #1: ((&ifmgd->beacon_connection_loss_work)){+.+.+.}, at: [<ffffffffbc6d774a>] process_one_work+0x1ba/0x720 [ 1157.659950] #2: (&wdev->mtx){+.+.+.}, at: [<ffffffffc0b8aad5>] ieee80211_mgd_probe_ap.part.28+0x25/0x160 [mac80211] [ 1157.670901] #3: (&local->iflist_mtx){+.+...}, at: [<ffffffffc0b8ab7a>] ieee80211_mgd_probe_ap.part.28+0xca/0x160 [mac80211] [ 1157.682466] Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-28rsi: Properly initialize data in rsi_sdio_ta_resetNathan Chancellor
When building with -Wuninitialized, Clang warns: drivers/net/wireless/rsi/rsi_91x_sdio.c:940:43: warning: variable 'data' is uninitialized when used here [-Wuninitialized] put_unaligned_le32(TA_HOLD_THREAD_VALUE, data); ^~~~ drivers/net/wireless/rsi/rsi_91x_sdio.c:930:10: note: initialize the variable 'data' to silence this warning u8 *data; ^ = NULL 1 warning generated. Using Clang's suggestion of initializing data to NULL wouldn't work out because data will be dereferenced by put_unaligned_le32. Use kzalloc to properly initialize data, which matches a couple of other places in this driver. Fixes: e5a1ecc97e5f ("rsi: add firmware loading for 9116 device") Link: https://github.com/ClangBuiltLinux/linux/issues/464 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-28rtw88: fix unassigned rssi_level in rtw_sta_infoYan-Hsuan Chuang
The new rssi_level should be stored in si, otherwise the rssi_level will never be updated and get a wrong RA mask, which is calculated by the rssi level If a wrong RA mask is chosen, the firmware will pick some *bad rates*. The most hurtful scene will be in *noisy environment*, such as office or public area with many APs and users. The latency would be high and the overall throughput would be only half or less. Tested in 2.4G in office area, with this patch the throughput increased from such as "1x Mbps -> 4x Mbps". Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-28rtw88: fix subscript above array bounds compiler warningStanislaw Gruszka
My compiler complains about: drivers/net/wireless/realtek/rtw88/phy.c: In function ‘rtw_phy_rf_power_2_rssi’: drivers/net/wireless/realtek/rtw88/phy.c:430:26: warning: array subscript is above array bounds [-Warray-bounds] linear = db_invert_table[i][j]; According to comment power_db should be in range 1 ~ 96 . To fix add check for boundaries before access the array. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-28mmc: meson-gx: fix irq ackJerome Brunet
While cleaning the ISR of the meson-gx and acking only raised irqs, the ack of the irq was moved at the very last stage of the function. This was stable during the initial tests but it triggered issues with hs200, under specific loads (like booting android). Acking the irqs after calling the mmc_request_done() causes the problem. Moving the ack back to the original place solves the issue. Since the irq is edge triggered, it does not hurt to ack irq even earlier, so let's do it early in the ISR. Fixes: 9c5fdb07a28d ("mmc: meson-gx: ack only raised irq") Tested-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Brad Harper <bjharper@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-28mmc: tmio: fix SCC error handling to avoid false positive CRC errorTakeshi Saito
If an SCC error occurs during a read/write command execution, a false positive CRC error message is output. mmcblk0: response CRC error sending r/w cmd command, card status 0x900 check_scc_error() checks SCC_RVSREQ.RVSERR bit. RVSERR detects a correction error in the next (up or down) delay tap position. However, since the command is successful, only retuning needs to be executed. This has been confirmed by HW engineers. Thus, on SCC error, set retuning flag instead of setting an error code. Fixes: b85fb0a1c8ae ("mmc: tmio: Fix SCC error detection") Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: updated comment and commit message, removed some braces] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-28mmc: tegra: Fix a warning messageDan Carpenter
The WARN_ON() macro takes a condition, not a warning message. I've changed this to use WARN(1, "msg... Fixes: ea8fc5953e8b ("mmc: tegra: update hw tuning process") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-28memstick: mspro_block: Fix an error code in mspro_block_issue_req()Dan Carpenter
We accidentally changed the error code from -EAGAIN to 1 when we did the blk-mq conversion. Maybe a contributing factor to this mistake is that it wasn't obvious that the "while (chunk) {" condition is always true. I have cleaned that up as well. Fixes: d0be12274dad ("mspro_block: convert to blk-mq") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-27i2c: synquacer: fix synquacer_i2c_doxfer() return valueMasahisa Kojima
master_xfer should return the number of messages successfully processed. Fixes: 0d676a6c4390 ("i2c: add support for Socionext SynQuacer I2C controller") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Okamoto Satoru <okamoto.satoru@socionext.com> Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-05-27i2c: mlxcpld: Fix wrong initialization order in probeVadim Pasternak
Fix wrong order in probing routine initialization - field `base_addr' is used before it's initialized. Move assignment of 'priv->base_addr` to the beginning, prior the call to mlxcpld_i2c_read_comm(). Wrong order caused the first read of capability register to be executed at wrong offset 0x0 instead of 0x2000. By chance it was a "good garbage" at 0x0 offset. Fixes: 313ce648b5a4 ("i2c: mlxcpld: Add support for extended transaction length for i2c-mlxcpld") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2019-05-27i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwrYingjoe Chen
If I2C_M_RECV_LEN check failed, msgs[i].buf allocated by memdup_user will not be freed. Pump index up so it will be freed. Fixes: 838bfa6049fb ("i2c-dev: Add support for I2C_M_RECV_LEN") Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-05-27RDMA/core: Fix panic when port_data isn't initializedKamal Heib
This happens if assign_name() returns failure when called from ib_register_device(), that will lead to the following panic in every time that someone touches the port_data's data members. BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 19 PID: 1994 Comm: systemd-udevd Not tainted 5.1.0-rc5+ #1 Hardware name: HP ProLiant DL360p Gen8, BIOS P71 12/20/2013 RIP: 0010:_raw_spin_lock_irqsave+0x1e/0x40 Code: 85 ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 9c 58 66 66 90 66 90 48 89 c3 fa 66 66 90 66 66 90 31 c0 ba 01 00 00 00 <f0> 0f b1 17 0f 94 c2 84 d2 74 05 48 89 d8 5b c3 89 c6 e8 b4 85 8a RSP: 0018:ffffa8d7079a7c08 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000202 RCX: ffffa8d7079a7bf8 RDX: 0000000000000001 RSI: ffff93607c990000 RDI: 00000000000000c0 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffc08c4dd8 R10: 0000000000000000 R11: 0000000000000001 R12: 00000000000000c0 R13: ffff93607c990000 R14: ffffffffc05a9740 R15: ffffa8d7079a7e98 FS: 00007f1c6ee438c0(0000) GS:ffff93609f6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 0000000819fca002 CR4: 00000000000606e0 Call Trace: free_netdevs+0x4d/0xe0 [ib_core] ib_dealloc_device+0x51/0xb0 [ib_core] __mlx5_ib_add+0x5e/0x70 [mlx5_ib] mlx5_add_device+0x57/0xe0 [mlx5_core] mlx5_register_interface+0x85/0xc0 [mlx5_core] ? 0xffffffffc0474000 do_one_initcall+0x4e/0x1d4 ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x15f/0x1c0 do_init_module+0x5a/0x218 load_module+0x186b/0x1e40 ? m_show+0x1c0/0x1c0 __do_sys_finit_module+0x94/0xe0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 8ceb1357b337 ("RDMA/device: Consolidate ib_device per_port data into one place") Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-27RDMA/uverbs: Pass udata on uverbs error unwindGal Pressman
When destroy_* is called as a result of uverbs create cleanup flow a cleared udata should be passed instead of NULL to indicate that it is called under user flow. Fixes: c4367a26357b ("IB: Pass uverbs_attr_bundle down ib_x destroy path") Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-27RDMA/core: Clear out the udata before error unwindJason Gunthorpe
The core code should not pass a udata to the driver destroy function that contains the input from the create command. Otherwise the driver will attempt to interpret the create udata as destroy udata, and at least in the case of EFA, will leak resources. Zero this stuff out before invoking destroy. Reported-by: Leon Romanovsky <leonro@mellanox.com> Fixes: c4367a26357b ("IB: Pass uverbs_attr_bundle down ib_x destroy path") Reviewed-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-27net: aquantia: tcp checksum 0xffff being handled incorrectlyNikita Danilov
Thats a known quirk in windows tcp stack it can produce 0xffff checksum. Thats incorrect but it is. Atlantic HW with LRO enabled handles that incorrectly and changes csum to 0xfffe - but indicates that csum is invalid. This causes driver to pass packet to linux networking stack with CSUM_NONE, stack eventually drops the packet. There is a quirk in atlantic HW to enable correct processing of 0xffff incorrect csum. Enable it. The visible bug is that windows link partner with software generated csums caused TCP connection to be unstable since all packets that csum value are dropped. Reported-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-27net: aquantia: fix LRO with FCS errorDmitry Bogdanov
Driver stops producing skbs on ring if a packet with FCS error was coalesced into LRO session. Ring gets hang forever. Thats a logical error in driver processing descriptors: When rx_stat indicates MAC Error, next pointer and eop flags are not filled. This confuses driver so it waits for descriptor 0 to be filled by HW. Solution is fill next pointer and eop flag even for packets with FCS error. Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-27net: aquantia: check rx csum for all packets in LRO sessionDmitry Bogdanov
Atlantic hardware does not aggregate nor breaks LRO sessions with bad csum packets. This means driver should take care of that. If in LRO session there is a non-first descriptor with invalid checksum (L2/L3/L4), the driver must account this information in csum application logic. Fixes: 018423e90bee8 ("net: ethernet: aquantia: Add ring support code") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-27net: aquantia: tx clean budget logic errorIgor Russkikh
In case no other traffic happening on the ring, full tx cleanup may not be completed. That may cause socket buffer to overflow and tx traffic to stuck until next activity on the ring happens. This is due to logic error in budget variable decrementor. Variable is compared with zero, and then post decremented, causing it to become MAX_INT. Solution is remove decrementor from the `for` statement and rewrite it in a clear way. Fixes: b647d3980948e ("net: aquantia: Add tx clean budget and valid budget handling logic") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-27vhost: scsi: add weight supportJason Wang
This patch will check the weight and exit the loop if we exceeds the weight. This is useful for preventing scsi kthread from hogging cpu which is guest triggerable. This addresses CVE-2019-3900. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Fixes: 057cbf49a1f0 ("tcm_vhost: Initial merge for vhost level target fabric driver") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-05-27vhost: vsock: add weight supportJason Wang
This patch will check the weight and exit the loop if we exceeds the weight. This is useful for preventing vsock kthread from hogging cpu which is guest triggerable. The weight can help to avoid starving the request from on direction while another direction is being processed. The value of weight is picked from vhost-net. This addresses CVE-2019-3900. Cc: Stefan Hajnoczi <stefanha@redhat.com> Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-27vhost_net: fix possible infinite loopJason Wang
When the rx buffer is too small for a packet, we will discard the vq descriptor and retry it for the next packet: while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk, &busyloop_intr))) { ... /* On overrun, truncate and discard */ if (unlikely(headcount > UIO_MAXIOV)) { iov_iter_init(&msg.msg_iter, READ, vq->iov, 1, 1); err = sock->ops->recvmsg(sock, &msg, 1, MSG_DONTWAIT | MSG_TRUNC); pr_debug("Discarded rx packet: len %zd\n", sock_len); continue; } ... } This makes it possible to trigger a infinite while..continue loop through the co-opreation of two VMs like: 1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the vhost process as much as possible e.g using indirect descriptors or other. 2) Malicious VM2 generate packets to VM1 as fast as possible Fixing this by checking against weight at the end of RX and TX loop. This also eliminate other similar cases when: - userspace is consuming the packets in the meanwhile - theoretical TOCTOU attack if guest moving avail index back and forth to hit the continue after vhost find guest just add new buffers This addresses CVE-2019-3900. Fixes: d8316f3991d20 ("vhost: fix total length when packets are too short") Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-27vhost: introduce vhost_exceeds_weight()Jason Wang
We used to have vhost_exceeds_weight() for vhost-net to: - prevent vhost kthread from hogging the cpu - balance the time spent between TX and RX This function could be useful for vsock and scsi as well. So move it to vhost.c. Device must specify a weight which counts the number of requests, or it can also specific a byte_weight which counts the number of bytes that has been processed. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-27virtio: Fix indentation of VIRTIO_MMIOFabrizio Castro
VIRTIO_MMIO config option block starts with a space, fix that. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-27iommu/vt-d: Set the right field for Page Walk SnoopLu Baolu
Set the page walk snoop to the right bit, otherwise the domain id field will be overlapped. Reported-by: Dave Jiang <dave.jiang@intel.com> Fixes: 6f7db75e1c469 ("iommu/vt-d: Add second level page table interface") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-27iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lockDave Jiang
Lockdep debug reported lock inversion related with the iommu code caused by dmar_insert_one_dev_info() grabbing the iommu->lock and the device_domain_lock out of order versus the code path in iommu_flush_dev_iotlb(). Expanding the scope of the iommu->lock and reversing the order of lock acquisition fixes the issue. [ 76.238180] dsa_bus wq0.0: dsa wq wq0.0 disabled [ 76.248706] [ 76.250486] ======================================================== [ 76.257113] WARNING: possible irq lock inversion dependency detected [ 76.263736] 5.1.0-rc5+ #162 Not tainted [ 76.267854] -------------------------------------------------------- [ 76.274485] systemd-journal/521 just changed the state of lock: [ 76.280685] 0000000055b330f5 (device_domain_lock){..-.}, at: iommu_flush_dev_iotlb.part.63+0x29/0x90 [ 76.290099] but this lock took another, SOFTIRQ-unsafe lock in the past: [ 76.297093] (&(&iommu->lock)->rlock){+.+.} [ 76.297094] [ 76.297094] [ 76.297094] and interrupts could create inverse lock ordering between them. [ 76.297094] [ 76.314257] [ 76.314257] other info that might help us debug this: [ 76.321448] Possible interrupt unsafe locking scenario: [ 76.321448] [ 76.328907] CPU0 CPU1 [ 76.333777] ---- ---- [ 76.338642] lock(&(&iommu->lock)->rlock); [ 76.343165] local_irq_disable(); [ 76.349422] lock(device_domain_lock); [ 76.356116] lock(&(&iommu->lock)->rlock); [ 76.363154] <Interrupt> [ 76.366134] lock(device_domain_lock); [ 76.370548] [ 76.370548] *** DEADLOCK *** Fixes: 745f2586e78e ("iommu/vt-d: Simplify function get_domain_for_dev()") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-27iommu: Add missing new line for dma typeLu Baolu
So that all types are printed in the same format. Fixes: c52c72d3dee81 ("iommu: Add sysfs attribyte for domain type") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-27drm/etnaviv: lock MMU while dumping coreLucas Stach
The devcoredump needs to operate on a stable state of the MMU while it is writing the MMU state to the coredump. The missing lock allowed both the userspace submit, as well as the GPU job finish paths to mutate the MMU state while a coredump is under way. Fixes: a8c21a5451d8 (drm/etnaviv: add initial etnaviv DRM driver) Reported-by: David Jander <david@protonic.nl> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: David Jander <david@protonic.nl> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-05-27loop: Don't change loop device under exclusive openerJan Kara
Loop module allows calling LOOP_SET_FD while there are other openers of the loop device. Even exclusive ones. This can lead to weird consequences such as kernel deadlocks like: mount_bdev() lo_ioctl() udf_fill_super() udf_load_vrs() sb_set_blocksize() - sets desired block size B udf_tread() sb_bread() __bread_gfp(bdev, block, B) loop_set_fd() set_blocksize() - now __getblk_slow() indefinitely loops because B != bdev block size Fix the problem by disallowing LOOP_SET_FD ioctl when there are exclusive openers of a loop device. [Deliberately chosen not to CC stable as a user with priviledges to trigger this race has other means of taking the system down and this has a potential of breaking some weird userspace setup] Reported-and-tested-by: syzbot+10007d66ca02b08f0e60@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-27drm/imx: ipuv3-plane: fix atomic update status query for non-plus i.MX6QPhilipp Zabel
The current buffer check halves the frame rate on non-plus i.MX6Q, as the IDMAC current buffer pointer is not yet updated when ipu_plane_atomic_update_pending is called from the EOF irq handler. Fixes: 70e8a0c71e9 ("drm/imx: ipuv3-plane: add function to query atomic update status") Tested-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Cc: stable@vger.kernel.org
2019-05-27drm/qxl: drop WARN_ONCE()Gerd Hoffmann
There is no good reason to flood the kernel log with a WARN stacktrace just because someone tried to mmap a prime buffer. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20190524104251.22761-1-kraxel@redhat.com
2019-05-27iio: temperature: mlx90632 Relax the compatibility checkCrt Mori
Register EE_VERSION contains mixture of calibration information and DSP version. So far, because calibrations were definite, the driver compatibility depended on whole contents, but in the newer production process the calibration part changes. Because of that, value in EE_VERSION will be changed and to avoid that calibration value is same as DSP version the MSB in calibration part was fixed to 1. That means existing calibrations (medical and consumer) will now have hex values (bits 8 to 15) of 83 and 84 respectively. Driver compatibility should be based only on DSP version part of the EE_VERSION (bits 0 to 7) register. Signed-off-by: Crt Mori <cmo@melexis.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-27iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controllerLorenzo Bianconi
Properly suspend/resume i2c slaves connected to st_lsm6dsx master controller if the CPU goes in suspended state Fixes: c91c1c844ebd ("imu: st_lsm6dsx: add i2c embedded controller support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-27staging:iio:ad7150: fix threshold mode config bitMelissa Wen
According to the AD7150 configuration register description, bit 7 assumes value 1 when the threshold mode is fixed and 0 when it is adaptive, however, the operation that identifies this mode was considering the opposite values. This patch renames the boolean variable to describe it correctly and properly replaces it in the places where it is used. Fixes: 531efd6aa0991 ("staging:iio:adc:ad7150: chan_spec conv + i2c_smbus commands + drop unused poweroff timeout control.") Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-27Merge tag 'intel-pinctrl-v5.2-2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.2-2 Fix a laggish ELAN touchpad responsiveness due to an odd interrupt masking. The following is an automated git shortlog grouped by driver: intel: - Clear interrupt status in mask/unmask callback - Use GENMASK() consistently
2019-05-27PCI: PM: Avoid possible suspend-to-idle issueRafael J. Wysocki
If a PCI driver leaves the device handled by it in D0 and calls pci_save_state() on the device in its ->suspend() or ->suspend_late() callback, it can expect the device to stay in D0 over the whole s2idle cycle. However, that may not be the case if there is a spurious wakeup while the system is suspended, because in that case pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq() which calls pci_restore_state(), via pci_pm_default_resume_early(), so state_saved is cleared and the second iteration of pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which may change the power state of the device. To avoid that, add a new internal flag, skip_bus_pm, that will be set by pci_pm_suspend_noirq() when it runs for the first time during the given system suspend-resume cycle if the state of the device has been saved already and the device is still in D0. Setting that flag will cause the next iterations of pci_pm_suspend_noirq() to set state_saved for pci_pm_resume_noirq(), so that it always restores the device state from the originally saved data, and avoid calling pci_prepare_to_sleep() for the device. Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-05-27ACPI: PM: Call pm_set_suspend_via_firmware() during hibernationRafael J. Wysocki
On systems with ACPI platform firmware the last stage of hibernation is analogous to system suspend to S3 (suspend-to-RAM), so it should be handled analogously. In particular, pm_suspend_via_firmware() should return 'true' in that stage to let the callers of it know that control will be passed to the platform firmware going forward, so pm_set_suspend_via_firmware() needs to be called then in analogy with acpi_suspend_begin(). However, the platform hibernation ->begin() callback is invoked during the "freeze" transition (before creating a snapshot image of system memory) as well as during the "hibernate" transition which is the last stage of it and pm_set_suspend_via_firmware() should be invoked by that callback in the latter stage only. In order to implement that redefine the hibernation ->begin() callback to take a pm_message_t argument to indicate which stage of hibernation is taking place and rework acpi_hibernation_begin() and acpi_hibernation_begin_old() to take it into account as needed. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-27ACPI/PCI: PM: Add missing wakeup.flags.valid checksRafael J. Wysocki
Both acpi_pci_need_resume() and acpi_dev_needs_resume() check if the current ACPI wakeup configuration of the device matches what is expected as far as system wakeup from sleep states is concerned, as reflected by the device_may_wakeup() return value for the device. However, they only should do that if wakeup.flags.valid is set for the device's ACPI companion, because otherwise the wakeup.prepare_count value for it is meaningless. Add the missing wakeup.flags.valid checks to these functions. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-05-27soundwire: stream: fix out of boundary access on port propertiesSrinivas Kandagatla
Assigning local iterator to array element and using it again for indexing would cross the array boundary. Fix this by directly referring array element without using the local variable. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-26net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()Kees Cook
Building with Clang reports the redundant use of MODULE_DEVICE_TABLE(): drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table' MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); ^ ./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE' extern typeof(name) __mod_##type##__##name##_device_table \ ^ <scratch space>:90:1: note: expanded from here __mod_eisa__de4x5_eisa_ids_device_table ^ drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); ^ ./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE' extern typeof(name) __mod_##type##__##name##_device_table \ ^ <scratch space>:85:1: note: expanded from here __mod_eisa__de4x5_eisa_ids_device_table ^ This drops the one further from the table definition to match the common use of MODULE_DEVICE_TABLE(). Fixes: 07563c711fbc ("EISA bus MODALIAS attributes support") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-03 05:47:16 +0000