| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
Cross-subsystem Changes:
string:
- add mem_is_zero()
Core Changes:
edid:
- use mem_is_zero()
Driver Changes:
ast:
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
bridge:
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
panel:
- ili9341: fix comments
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple: support Innolux G070ACE-LH3 plus DT bindings; support
On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings
- st7701: decouple DSI and DRM code; add SPI support; support Anbernic
RG28XX plus DT bindings
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822150710.GA243952@localhost.localdomain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix KASLR base offset to account for symbol offsets in the vmlinux
ELF file, preventing tool breakages like the drgn debugger
- Fix potential memory corruption of physmem_info during kernel
physical address randomization
- Fix potential memory corruption due to overlap between the relocated
lowcore and identity mapping by correctly reserving lowcore memory
- Fix performance regression and avoid randomizing identity mapping
base by default
- Fix unnecessary delay of AP bus binding complete uevent to prevent
startup lag in KVM guests using AP
* tag 's390-6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Fix KASLR base offset off by __START_KERNEL bytes
s390/boot: Avoid possible physmem_info segment corruption
s390/ap: Refine AP bus bindings complete processing
s390/mm: Pin identity mapping base to zero
s390/mm: Prevent lowcore vs identity mapping overlap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The important core fix is another tweak to our discard discovery
issues. The off by 512 in logical block count seems bad, but in fact
the inline was only ever used in debug prints, which is why no-one
noticed"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Do not attempt to configure discard unless LBPME is set
scsi: MAINTAINERS: Add header files to SCSI SUBSYSTEM
scsi: ufs: qcom: Add UFSHCD_QUIRK_BROKEN_LSDBS_CAP for SM8550 SoC
scsi: ufs: core: Add a quirk for handling broken LSDBS field in controller capabilities register
scsi: core: Fix the return value of scsi_logical_block_count()
scsi: MAINTAINERS: Update HiSilicon SAS controller driver maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes
* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: himax_hx83112b - fix incorrect size when reading product ID
Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
Input: uinput - reject requests with unreasonable number of slots
Input: edt-ft5x06 - add support for FocalTech FT8201
dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
Input: adc-joystick - fix optional value handling
Input: synaptics - enable SMBus for HP Elitebook 840 G2
Input: ads7846 - ratelimit the spi_sync error message
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes. xe and msm are the major groups, with
amdgpu/i915/nouveau having smaller bits. xe has a bunch of hw
workaround fixes that were found to be missing, so that is why there
are a bunch of scattered fixes, and one larger one. But overall size
doesn't look too out of the ordinary.
msm:
- virtual plane fixes:
- drop yuv on hw where not supported
- csc vs yuv format fix
- rotation fix
- fix fb cleanup on close
- reset phy before link training
- fix visual corruption at 4K
- fix NULL ptr crash on hotplug
- simplify debug macros
- sc7180 fix
- adreno firmware name error path fix
amdgpu:
- GFX10 firmware loading fix
- SDMA 5.2 fix
- Debugfs parameter validation fix
- eGPU hotplug fix
i915:
- fix HDCP timeouts
nouveau:
- fix SG_DEBUG crash
xe:
- Fix OA format masks which were breaking build with gcc-5
- Fix opregion leak (Lucas)
- Fix OA sysfs entry (Ashutosh)
- Fix VM dma-resv lock (Brost)
- Fix tile fini sequence (Brost)
- Prevent UAF around preempt fence (Auld)
- Fix DGFX display suspend/resume (Maarten)
- Many Xe/Xe2 critical workarounds (Auld, Ngai-Mint, Bommu, Tejas, Daniele)
- Fix devm/drmm issues (Daniele)
- Fix missing workqueue destroy in xe_gt_pagefault (Stuart)
- Drop HW fence pointer to HW fence ctx (Brost)
- Free job before xe_exec_queue_put (Brost)"
* tag 'drm-fixes-2024-08-24' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
drm/xe: Free job before xe_exec_queue_put
drm/xe: Drop HW fence pointer to HW fence ctx
drm/xe: Fix missing workqueue destroy in xe_gt_pagefault
drm/amdgpu: fix eGPU hotplug regression
drm/amdgpu: Validate TA binary size
drm/amdgpu/sdma5.2: limit wptr workaround to sdma 5.2.1
drm/amdgpu: fixing rlc firmware loading failure issue
drm/xe/uc: Use devm to register cleanup that includes exec_queues
drm/xe: use devm instead of drmm for managed bo
drm/xe/xe2hpg: Add Wa_14021821874
drm/xe: fix WA 14018094691
drm/xe/xe2: Add Wa_15015404425
drm/xe/xe2: Make subsequent L2 flush sequential
drm/xe/xe2lpg: Extend workaround 14021402888
drm/xe/xe2lpm: Extend Wa_16021639441
drm/xe/bmg: implement Wa_16023588340
drm/xe/oa/uapi: Make bit masks unsigned
drm/xe/display: Make display suspend/resume work on discrete
drm/xe: prevent UAF around preempt fence
drm/xe: Fix tile fini sequence
...
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith
- Remove unused struct field (Nilay)
- Fix fabrics keep-alive teardown order (Ming)
- Write zeroes fixes (John)
* tag 'block-6.11-20240823' of git://git.kernel.dk/linux:
nvme: Remove unused field
nvme: move stopping keep-alive into nvme_uninit_ctrl()
block: Drop NULL check in bdev_write_zeroes_sectors()
block: Read max write zeroes once for __blkdev_issue_write_zeroes()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix backlight control on a Dell All In One system where a backlight
controller board is attached to a UART port and the dell-uart
backlight driver binds to it, but the backlight is actually controlled
by other means (Hans de Goede)"
* tag 'acpi-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add backlight=native quirk for Dell OptiPlex 7760 AIO
platform/x86: dell-uart-backlight: Use acpi_video_get_backlight_type()
ACPI: video: Add Dell UART backlight controller detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix error handling in the thermal debug code and OF node
reference leaks in the thermal OF driver.
Specifics:
- Use IS_ERR() in checks of debugfs_create_dir() return value instead
of checking it against NULL in the thermal debug code (Yang Ruibin)
- Fix three OF node reference leaks in thermal_of (Krzysztof
Kozlowski)"
* tag 'thermal-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: of: Fix OF node leak in of_thermal_zone_find() error paths
thermal: of: Fix OF node leak in thermal_of_zone_register()
thermal: of: Fix OF node leak in thermal_of_trips_init() error path
thermal/debugfs: Fix the NULL vs IS_ERR() confusion in debugfs_create_dir()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull mmc fixes from Ulf Hansson:
"MMC core:
- Fix NULL dereference for mmc_test on allocation failure
MMC host:
- dw_mmc: Fix support for deferred probe for biu/ciu clocks
- mtk-sd: Fix CMD8 support when fragile tuning settings"
* tag 'mmc-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mmc_test: Fix NULL dereference on allocation failure
mmc: dw_mmc: allow biu and ciu clocks to defer
mmc: mtk-sd: receive cmd8 data when hs400 tuning fail
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes here, all driver specific and none of them
too serious. For whatever reason runtime PM seems to have been causing
a bunch of issues recently"
* tag 'spi-fix-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: pxa2xx: Move PM runtime handling to the glue drivers
spi: pxa2xx: Do not override dev->platform_data on probe
spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register
spi: spi-cadence-quadspi: Fix OSPI NOR failures during system resume
spi: zynqmp-gqspi: Scale timeout by data size
|
|
Drop unsupported features on smu v14_0_2.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When app unmap vm ranges(munmap) kfd/svm starts drain pending page fault and
not handle any incoming pages fault of this process until a deferred work item
got executed by default system wq. The time period of "not handle page fault"
can be long and is unpredicable. That is advese to kfd performance on page
faults recovery.
This patch uses time stamp of incoming page fault to decide to drop or recover
page fault. When app unmap vm ranges kfd records each gpu device's ih ring
current time stamp. These time stamps are used at kfd page fault recovery
routine.
Any page fault happened on unmapped ranges after unmap events is application
bug that accesses vm range after unmap. It is not driver work to cover that.
By using time stamp of page fault do not need drain page faults at deferred
work. So, the time period that kfd does not handle page faults is reduced
and can be controlled.
Signed-off-by: Xiaogang.Chen <Xiaogang.Chen@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add p2s table support for a new revision of SMUv13.0.6.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gc_info table v1.3 for IP discovery.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of using state->fb->obj[0] directly, get object from framebuffer
by calling drm_gem_fb_get_obj() and return error code when object is
null to avoid using null object of framebuffer.
Fixes: 5d945cbcd4b1 ("drm/amd/display: Create a file dedicated to planes")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add list empty check to avoid null pointer issues in some corner cases.
- list_for_each_entry_safe()
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dcn401/dcn401_dsc.c:30:24: warning:
symbol 'dcn401_dsc_funcs' was not declared. Should it be static?
This symbol is not used outside of dcn401_dsc.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/hubp/dcn35/dcn35_hubp.c:191:19: warning:
symbol 'dcn35_hubp_funcs' was not declared. Should it be static?
This symbol is not used outside of dcn35_hubp.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4.c:12:28: warning:
symbol 'core_dcn4_ip_caps_base' was not declared. Should it be static?
This symbol is not used outside of dcn35_hubp.c, so marks it static.
And do not want to change it, so mark it const.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:6853:56: warning:
symbol 'core_dcn4_g6_temp_read_blackout_table' was not declared. Should it be static?
This symbol is not used outside of dml2_core_dcn4_calcs.c, so marks it static.
And not want to change it, so mark it const.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3575
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Driver switches to interrupt source id to identify
utcl2 poison event. polling interface is not needed.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
when trying to enable p2p the amdgpu_device_is_peer_accessible()
checks the condition where address_mask overlaps the aper_base
and hence returns 0, due to which the p2p disables for this platform
IOMMU should remap the BAR addresses so the device can access
them. Hence check if peer_adev is remapping DMA
v5: (Felix, Alex)
- fixing comment as per Alex feedback
- refactor code as per Felix
v4: (Alex)
- fix the comment and description
v3:
- remove iommu_remap variable
v2: (Alex)
- Fix as per review comments
- add new function amdgpu_device_check_iommu_remap to check if iommu
remap
Signed-off-by: Rahul Jain <Rahul.Jain@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update message interface for smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Not supported.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Traditional utcl2 fault_status polling does not
work in SRIOV environment. The polling of fault
status register from guest side will be dropped
by hardware.
Driver should switch to check utcl2 interrupt
source id to identify utcl2 poison event. It is
set to 1 when poisoned data interrupts are
signaled.
v2: drop the unused local variable (Tao)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fix from Bartosz Golaszewski:
- request the wlan-enable GPIO "as-is" to fix an issue with the wifi
module being already powered up before linux boots
* tag 'pwrseq-fixes-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: request the WLAN enable GPIO as-is
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Remove duplicated clocks for scu power domain
- imx: Wait for SSAR to complete power-on for i.MX93 power domain
* tag 'pmdomain-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: wait SSAR when i.MX93 power domain on
pmdomain: imx: scu-pd: Remove duplicated clocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix the max segment size and max number of segments supported by the
pata_macio driver to fix issues with BIO splitting leading to an
overflow of the adapter DMA table (from Michael)
- Related to the previous fix, change BUG_ON() calls for incorrect
command buffer segmentation into WARN_ON() and an error return (from
Michael)
* tag 'ata-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_macio: Use WARN instead of BUG
ata: pata_macio: Fix DMA table overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution of
tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers"
* tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
s390/iucv: Fix vargs handling in iucv_alloc_device()
net: ovs: fix ovs_drop_reasons error
net: xilinx: axienet: Fix dangling multicast addresses
net: xilinx: axienet: Always disable promiscuous mode
MAINTAINERS: Mark JME Network Driver as Odd Fixes
MAINTAINERS: Add header files to NETWORKING sections
MAINTAINERS: Add limited globs for Networking headers
MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section
MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS
octeontx2-af: Fix CPT AF register offset calculation
net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F
net: ngbe: Fix phy mode set to external phy
netfilter: flowtable: validate vlan header
bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
ipv6: prevent possible UAF in ip6_xmit()
ipv6: fix possible UAF in ip6_finish_output2()
ipv6: prevent UAF in ip6_send_skb()
netpoll: do not export netpoll_poll_[disable|enable]()
selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path
udp: fix receiving fraglist GSO packets
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Eliminate the fdtoverlay command duplication in scripts/Makefile.lib
- Fix 'make compile_commands.json' for external modules
- Ensure scripts/kconfig/merge_config.sh handles missing newlines
- Fix some build errors on macOS
* tag 'kbuild-fixes-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: fix typos "prequisites" to "prerequisites"
Documentation/llvm: turn make command for ccache into code block
kbuild: avoid scripts/kallsyms parsing /dev/null
treewide: remove unnecessary <linux/version.h> inclusion
scripts: kconfig: merge_config: config files: add a trailing newline
Makefile: add $(srctree) to dependency of compile_commands.json target
kbuild: clean up code duplication in cmd_fdtoverlay
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Fix OA format masks which were breaking build with gcc-5 (Geert)
Driver Changes:
- Fix opregion leak (Lucas)
- Fix OA sysfs entry (Ashutosh)
- Fix VM dma-resv lock (Brost)
- Fix tile fini sequence (Brost)
- Prevent UAF around preempt fence (Auld)
- Fix DGFX display suspend/resume (Maarten)
- Many Xe/Xe2 critical workarounds (Auld, Ngai-Mint, Bommu, Tejas, Daniele)
- Fix devm/drmm issues (Daniele)
- Fix missing workqueue destroy in xe_gt_pagefault (Stuart)
- Drop HW fence pointer to HW fence ctx (Brost)
- Free job before xe_exec_queue_put (Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZsdVe0XI2Pq8C-ON@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
nouveau:
- firmware: use dma non-coherent allocator
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822123907.GA234335@localhost.localdomain
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix for HDCP timeouts
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZsbPMm6XfzimmZW0@jlahtine-mobl.ger.corp.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.11-2024-08-21:
amdgpu:
- GFX10 firmware loading fix
- SDMA 5.2 fix
- Debugfs parameter validation fix
- eGPU hotplug fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821172810.302416-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.11-rc5
1) Fixes from the virtual plane series, namely
- fix the list of formats for QCM2290 since it has no YUV support
- minor fix in dpu_plane_atomic_check_pipe() to check only for csc and
not csc and scaler while allowing yuv formats
- take rotation into account while allocating virtual planes
2) Fix to cleanup FB if dpu_format_populate_layout() fails. This fixes the
warning splat during DRM file closure
3) Fix to reset the phy link params before re-starting link training. This
fixes the 100% link training failure when someone starts modetest while
cable is connected
4) Long pending fix to fix a visual corruption seen for 4k modes. Root-cause
was we cannot support 4k@30 with 30bpp with 2 lanes so this is a critical
fix to use 24bpp for such cases
5) Fix to move dpu encoder's connector assignment to atomic_enable(). This
fixes the NULL ptr crash for cases when there is an atomic_enable()
without atomic_modeset() after atomic_disable() . This happens for
connectors_changed case of crtc. It fixes a NULL ptr crash reported
during hotplug.
6) Fix to simplify DPU's debug macros without which dynamic debug does not
work as expected
7) Fix the highest bank bit setting for sc7180
8) adreno: fix error return if missing firmware-name
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvxF2p3-AsjUydmSYrA0Vb+Ea7nh3VtNX0pT0Ae_Me-Kw@mail.gmail.com
|
|
The "name" field in struct nvme_ctrl is unsued so removing it.
This would help save 12 bytes of space for each nvme_ctrl instance
created.
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit 4733b65d82bd ("nvme: start keep-alive after admin queue setup")
moves starting keep-alive from nvme_start_ctrl() into
nvme_init_ctrl_finish(), but don't move stopping keep-alive into
nvme_uninit_ctrl(), so keep-alive work can be started and keep pending
after failing to start controller, finally use-after-free is triggered if
nvme host driver is unloaded.
This patch fixes kernel panic when running nvme/004 in case that connection
failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl().
This way is reasonable because keep-alive is now started in
nvme_init_ctrl_finish().
Fixes: 3af755a46881 ("nvme: move nvme_stop_keep_alive() back to original position")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mark O'Donovan <shiftee@posteo.net>
Reported-by: Changhui Zhong <czhong@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If a multicast address is removed but there are still some multicast
addresses, that address would remain programmed into the frame filter.
Fix this by explicitly setting the enable bit for each filter.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If promiscuous mode is disabled when there are fewer than four multicast
addresses, then it will not be reflected in the hardware. Fix this by
always clearing the promiscuous mode flag even when we program multicast
addresses.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Terminating for_each_available_child_of_node() loop requires dropping OF
node reference, so bailing out on errors misses this. Solve the OF node
reference leak with scoped for_each_available_child_of_node_scoped().
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20240814195823.437597-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
thermal_of_zone_register() calls of_thermal_zone_find() which will
iterate over OF nodes with for_each_available_child_of_node() to find
matching thermal zone node. When it finds such, it exits the loop and
returns the node. Prematurely ending for_each_available_child_of_node()
loops requires dropping OF node reference, thus success of
of_thermal_zone_find() means that caller must drop the reference.
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20240814195823.437597-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Terminating for_each_child_of_node() loop requires dropping OF node
reference, so bailing out after thermal_of_populate_trip() error misses
this. Solve the OF node reference leak with scoped
for_each_child_of_node_scoped().
Fixes: d0c75fa2c17f ("thermal/of: Initialize trip points separately")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20240814195823.437597-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PCI and platform buses have different defaults for runtime PM.
In particular PCI probe is assumed to be called when PM runtime
is enabled by the PCI core. In this case if we try enable it again
the PM runtime complaints with
pxa2xx_spi_pci 0000:00:07.0: Unbalanced pm_runtime_enable!
Fix this by moving PM runtime handling from the SPI PXA2xx core
to the glue drivers.
Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")
Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file")
Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240822113408.750831-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The platform_data field may be supplied by legacy board code.
In other cases we override it, and module remove and probe cycle
will crash the kernel since it will carry a stale pointer.
Fix this by supplying a third argument to the pxa2xx_spi_probe()
and avoid overriding dev->platform_data.
Reported-by: Hao Ma <hao.ma@intel.com>
Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")
Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file")
Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240822113408.750831-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some CPT AF registers are per LF and others are global. Translation
of PF/VF local LF slot number to actual LF slot number is required
only for accessing perf LF registers. CPT AF global registers access
do not require any LF slot number. Also, there is no reason CPT
PF/VF to know actual lf's register offset.
Without this fix microcode loading will fail, VFs cannot be created
and hardware is not usable.
Fixes: bc35e28af789 ("octeontx2-af: replace cpt slot with lf id on reg write")
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821070558.1020101-1-bbhushan2@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current implementation incorrectly sets the mode bit of the PHY chip.
Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the
configuration nibble of a LED- it should be set independently of the
index of the LED being configured.
As a consequence, the RTL8211F LED control is actually operating in Mode A.
Fix the error by or-ing final register value to write with a const-value of
RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly.
Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F")
Signed-off-by: Sava Jakovljev <savaj@meyersound.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/PAWP192MB21287372F30C4E55B6DF6158C38E2@PAWP192MB2128.EURP192.PROD.OUTLOOK.COM
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe() and devm_clk_get_optional(). This results in much
less code.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-6-wahrenst@gmx.net
|
|
DRM_ERROR() has been deprecated in favor of pr_err(). However, we
should prefer to use drm_err() whenever possible so we get device-
specific output with the error message. In error case of kcalloc,
we can simply drop DRM_ERROR(), because kcalloc already logs errors.
Suggested-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-4-wahrenst@gmx.net
|
|
The commit 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is
powered in detect") introduced the necessary power management handling
to avoid register access while controller is powered down.
Unfortunately it just print a warning if pm_runtime_resume_and_get()
fails and proceed anyway.
This could happen during suspend to idle. So we must assume it is unsafe
to access the HDMI register. So bail out properly.
Fixes: 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is powered in detect")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-3-wahrenst@gmx.net
|
