summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-03-29vfio/nvlink: Add missing SPAPR_TCE_IOMMU dependsJason Gunthorpe
Compiling the nvlink stuff relies on the SPAPR_TCE_IOMMU otherwise there are compile errors: drivers/vfio/pci/vfio_pci_nvlink2.c:101:10: error: implicit declaration of function 'mm_iommu_put' [-Werror,-Wimplicit-function-declaration] ret = mm_iommu_put(data->mm, data->mem); As PPC only defines these functions when the config is set. Previously this wasn't a problem by chance as SPAPR_TCE_IOMMU was the only IOMMU that could have satisfied IOMMU_API on POWERNV. Fixes: 179209fa1270 ("vfio: IOMMU_API should be selected") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Message-Id: <0-v1-83dba9768fc3+419-vfio_nvlink2_kconfig_jgg@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-29gianfar: Handle error code at MAC address changeClaudiu Manoil
Handle return error code of eth_mac_addr(); Fixes: 3d23a05c75c7 ("gianfar: Enable changing mac addr when if up") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29ethernet: myri10ge: Fix a use after free in myri10ge_sw_tsoLv Yunlong
In myri10ge_sw_tso, the skb_list_walk_safe macro will set (curr) = (segs) and (next) = (curr)->next. If status!=0 is true, the memory pointed by curr and segs will be free by dev_kfree_skb_any(curr). But later, the segs is used by segs = segs->next and causes a uaf. As (next) = (curr)->next, my patch replaces seg->next to next. Fixes: 536577f36ff7a ("net: myri10ge: use skb_list_walk_safe helper for gso segments") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29mlxsw: spectrum: Fix ECN marking in tunnel decapsulationIdo Schimmel
Cited commit changed the behavior of the software data path with regards to the ECN marking of decapsulated packets. However, the commit did not change other callers of __INET_ECN_decapsulate(), namely mlxsw. The driver is using the function in order to ensure that the hardware and software data paths act the same with regards to the ECN marking of decapsulated packets. The discrepancy was uncovered by commit 5aa3c334a449 ("selftests: forwarding: vxlan_bridge_1d: Fix vxlan ecn decapsulate value") that aligned the selftest to the new behavior. Without this patch the selftest passes when used with veth pairs, but fails when used with mlxsw netdevs. Fix this by instructing the device to propagate the ECT(1) mark from the outer header to the inner header when the inner header is ECT(0), for both NVE and IP-in-IP tunnels. A helper is added in order not to duplicate the code between both tunnel types. Fixes: b723748750ec ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29clk: socfpga: fix iomem pointer cast on 64-bitKrzysztof Kozlowski
Pointers should be cast with uintptr_t instead of integer. This fixes warning when compile testing on ARM64: drivers/clk/socfpga/clk-gate.c: In function ‘socfpga_clk_recalc_rate’: drivers/clk/socfpga/clk-gate.c:102:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Fixes: b7cec13f082f ("clk: socfpga: Look for the GPIO_DB_CLK by its offset") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20210314110709.32599-1-krzysztof.kozlowski@canonical.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-29drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings()Nirmoy Das
Offset calculation wasn't correct as start addresses are in pfn not in bytes. CC: stable@vger.kernel.org Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-29drm/amd/pm: no need to force MCLK to highest when no display connectedEvan Quan
Correct the check for vblank short. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-29ice: Cleanup fltr list in case of allocation issuesRobert Malz
When ice_remove_vsi_lkup_fltr is called, by calling ice_add_to_vsi_fltr_list local copy of vsi filter list is created. If any issues during creation of vsi filter list occurs it up for the caller to free already allocated memory. This patch ensures proper memory deallocation in these cases. Fixes: 80d144c9ac82 ("ice: Refactor switch rule management structures and functions") Signed-off-by: Robert Malz <robertx.malz@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Use port number instead of PF ID for WoLAnirudh Venkataramanan
As per the spec, the WoL control word read from the NVM should be interpreted as port numbers, and not PF numbers. So when checking if WoL supported, use the port number instead of the PF ID. Also, ice_is_wol_supported doesn't really need a pointer to the pf struct, but just needs a pointer to the hw instance. Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Fix for dereference of NULL pointerJacek Bułatek
Add handling of allocation fault for ice_vsi_list_map_info. Also *fi should not be NULL pointer, it is a reference to raw data field, so remove this variable and use the reference directly. Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Signed-off-by: Jacek Bułatek <jacekx.bulatek@intel.com> Co-developed-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: remove DCBNL_DEVRESET bit from PF stateDave Ertman
The original purpose of the ICE_DCBNL_DEVRESET was to protect the driver during DCBNL device resets. But, the flow for DCBNL device resets now consists of only calls up the stack such as dev_close() and dev_open() that will result in NDO calls to the driver. These will be handled with state changes from the stack. Also, there is a problem of the dev_close and dev_open being blocked by checks for reset in progress also using the ICE_DCBNL_DEVRESET bit. Since the ICE_DCBNL_DEVRESET bit is not necessary for protecting the driver from DCBNL device resets and it is actually blocking changes coming from the DCBNL interface, remove the bit from the PF state and don't block driver function based on DCBNL reset in progress. Fixes: b94b013eb626 ("ice: Implement DCBNL support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29PM: runtime: Fix race getting/putting suppliers at probeAdrian Hunter
pm_runtime_put_suppliers() must not decrement rpm_active unless the consumer is suspended. That is because, otherwise, it could suspend suppliers for an active consumer. That can happen as follows: static int driver_probe_device(struct device_driver *drv, struct device *dev) { int ret = 0; if (!device_is_registered(dev)) return -ENODEV; dev->can_match = true; pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); pm_runtime_get_suppliers(dev); if (dev->parent) pm_runtime_get_sync(dev->parent); At this point, dev can runtime suspend so rpm_put_suppliers() can run, rpm_active becomes 1 (the lowest value). pm_runtime_barrier(dev); if (initcall_debug) ret = really_probe_debug(dev, drv); else ret = really_probe(dev, drv); Probe callback can have runtime resumed dev, and then runtime put so dev is awaiting autosuspend, but rpm_active is 2. pm_request_idle(dev); if (dev->parent) pm_runtime_put(dev->parent); pm_runtime_put_suppliers(dev); Now pm_runtime_put_suppliers() will put the supplier i.e. rpm_active 2 -> 1, but consumer can still be active. return ret; } Fix by checking the runtime status. For any status other than RPM_SUSPENDED, rpm_active can be considered to be "owned" by rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing. Reported-by: Asutosh Das <asutoshd@codeaurora.org> Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-29PM: runtime: Fix ordering in pm_runtime_get_suppliers()Adrian Hunter
rpm_active indicates how many times the supplier usage_count has been incremented. Consequently it must be updated after pm_runtime_get_sync() of the supplier, not before. Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-29ACPI: tables: x86: Reserve memory occupied by ACPI tablesRafael J. Wysocki
The following problem has been reported by George Kennedy: Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") the following use after free occurs intermittently when ACPI tables are accessed. BUG: KASAN: use-after-free in ibft_init+0x134/0xc49 Read of size 4 at addr ffff8880be453004 by task swapper/0/1 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1 Call Trace: dump_stack+0xf6/0x158 print_address_description.constprop.9+0x41/0x60 kasan_report.cold.14+0x7b/0xd4 __asan_report_load_n_noabort+0xf/0x20 ibft_init+0x134/0xc49 do_one_initcall+0xc4/0x3e0 kernel_init_freeable+0x5af/0x66b kernel_init+0x16/0x1d0 ret_from_fork+0x22/0x30 ACPI tables mapped via kmap() do not have their mapped pages reserved and the pages can be "stolen" by the buddy allocator. Apparently, on the affected system, the ACPI table in question is not located in "reserved" memory, like ACPI NVS or ACPI Data, that will not be used by the buddy allocator, so the memory occupied by that table has to be explicitly reserved to prevent the buddy allocator from using it. In order to address this problem, rearrange the initialization of the ACPI tables on x86 to locate the initial tables earlier and reserve the memory occupied by them. The other architectures using ACPI should not be affected by this change. Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/ Reported-by: George Kennedy <george.kennedy@oracle.com> Tested-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
2021-03-29ice: fix memory allocation callBruce Allan
Fix the order of number of array members and member size parameters in a *calloc() call. Fixes: b3c3890489f6 ("ice: avoid unnecessary single-member variable-length structs") Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: prevent ice_open and ice_stop during resetKrzysztof Goreczny
There is a possibility of race between ice_open or ice_stop calls performed by OS and reset handling routine both trying to modify VSI resources. Observed scenarios: - reset handler deallocates memory in ice_vsi_free_arrays and ice_open tries to access it in ice_vsi_cfg_txq leading to driver crash - reset handler deallocates memory in ice_vsi_free_arrays and ice_close tries to access it in ice_down leading to driver crash - reset handler clears port scheduler topology and sets port state to ICE_SCHED_PORT_STATE_INIT leading to ice_ena_vsi_txq fail in ice_open To prevent this additional checks in ice_open and ice_stop are introduced to make sure that OS is not allowed to alter VSI config while reset is in progress. Fixes: cdedef59deb0 ("ice: Configure VSIs for Tx/Rx") Signed-off-by: Krzysztof Goreczny <krzysztof.goreczny@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Recognize 860 as iSCSI port in CEE modeChinh T Cao
iSCSI can use both TCP ports 860 and 3260. However, in our current implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command doesn't provide a way to communicate the protocol port number to the AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the AQ's caller layer. Rely on the dcbx-willing mode, desired QoS and remote QoS configuration to determine which port number that iSCSI will use. Fixes: 0ebd3ff13cca ("ice: Add code for DCB initialization part 2/4") Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Increase control queue timeoutFabio Pricoco
250 msec timeout is insufficient for some AQ commands. Advice from FW team was to increase the timeout. Increase to 1 second. Fixes: 7ec59eeac804 ("ice: Add support for control queues") Signed-off-by: Fabio Pricoco <fabio.pricoco@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Continue probe on link/PHY errorsAnirudh Venkataramanan
An incorrect NVM update procedure can result in the driver failing probe. In this case, the recommended resolution method is to update the NVM using the right procedure. However, if the driver fails probe, the user will not be able to update the NVM. So do not fail probe on link/PHY errors. Fixes: 1a3571b5938c ("ice: restore PHY settings on media insertion") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29drm/exynos/decon5433: Remove the unused include statementsTian Tao
This driver doesn't reference of_gpio.h, so drop it. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2021-03-28Input: elants_i2c - drop zero-checking of ABS_MT_TOUCH_MAJOR resolutionDmitry Osipenko
Drop unnecessary zero-checking of ABS_MT_TOUCH_MAJOR resolution since there is no difference between setting resolution to 0 vs not setting it at all. This change makes code cleaner a tad. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210328235507.19240-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-28drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmitLv Yunlong
In pvc_xmit, if __skb_pad(skb, pad, false) failed, it will free the skb in the first time and goto drop. But the same skb is freed by kfree_skb(skb) in the second time in drop. Maintaining the original function unchanged, my patch adds a new label out to avoid the double free if __skb_pad() failed. Fixes: f5083d0cee08a ("drivers/net/wan/hdlc_fr: Improvements to the code of pvc_xmit") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-28Merge tag 'auxdisplay-for-linus-v5.12-rc6' of git://github.com/ojeda/linuxLinus Torvalds
Pull auxdisplay fix from Miguel Ojeda: "Remove in_interrupt() usage (Sebastian Andrzej Siewior)" * tag 'auxdisplay-for-linus-v5.12-rc6' of git://github.com/ojeda/linux: auxdisplay: Remove in_interrupt() usage.
2021-03-28Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Seven fixes, all in drivers (qla2xxx, mkt3sas, qedi, target, ibmvscsi). The most serious are the target pscsi oom and the qla2xxx revert which can otherwise cause a use after free" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: pscsi: Clean up after failure in pscsi_map_sg() scsi: target: pscsi: Avoid OOM in pscsi_map_sg() scsi: mpt3sas: Fix error return code of mpt3sas_base_attach() scsi: qedi: Fix error return code of qedi_alloc_global_queues() scsi: Revert "qla2xxx: Make sure that aborted commands are freed" scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ aware scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops()
2021-03-27Input: elants_i2c - fix division by zero if firmware reports zero phys sizeDmitry Osipenko
Touchscreen firmware of ASUS Transformer TF700T reports zeros for the phys size. Hence check whether the size is zero and don't set the resolution in this case. Reported-by: Jasper Korten <jja2000@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210302100824.3423-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-27Merge tag 'icc-5.12-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Georgi writes: interconnect fixes for v5.12 This contains a few tiny drivers and core fixes that have been reported during this cycle. - msm8939: Remove rpm-ids from non-RPM nodes - core: Fix error return code of icc_link_destroy() - core: Fix kerneldoc warning Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: Fix kerneldoc warning interconnect: core: fix error return code of icc_link_destroy() interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
2021-03-27usb: cdnsp: Fixes issue with dequeuing requests after disabling endpointPawel Laszczak
Patch fixes the bug: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 4137 Comm: uvc-gadget Tainted: G OE 5.10.0-next-20201214+ #3 Hardware name: ASUS All Series/Q87T, BIOS 0908 07/22/2014 RIP: 0010:cdnsp_remove_request+0xe9/0x530 [cdnsp_udc_pci] Code: 01 00 00 31 f6 48 89 df e8 64 d4 ff ff 48 8b 43 08 48 8b 13 45 31 f6 48 89 42 08 48 89 10 b8 98 ff ff ff 48 89 1b 48 89 5b 08 <41> 83 6d 50 01 41 83 af d0 00 00 00 01 41 f6 84 24 78 20 00 00 08 RSP: 0018:ffffb68d00d07b60 EFLAGS: 00010046 RAX: 00000000ffffff98 RBX: ffff9d29c57fbf00 RCX: 0000000000001400 RDX: ffff9d29c57fbf00 RSI: 0000000000000000 RDI: ffff9d29c57fbf00 RBP: ffffb68d00d07bb0 R08: ffff9d2ad9510a00 R09: ffff9d2ac011c000 R10: ffff9d2a12b6e760 R11: 0000000000000000 R12: ffff9d29d3fb8000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d29d3fb88c0 FS: 0000000000000000(0000) GS:ffff9d2adba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 0000000102164005 CR4: 00000000001706f0 Call Trace: cdnsp_ep_dequeue+0x3c/0x90 [cdnsp_udc_pci] cdnsp_gadget_ep_dequeue+0x3f/0x80 [cdnsp_udc_pci] usb_ep_dequeue+0x21/0x70 [udc_core] uvcg_video_enable+0x19d/0x220 [usb_f_uvc] uvc_v4l2_release+0x49/0x90 [usb_f_uvc] v4l2_release+0xa5/0x100 [videodev] __fput+0x99/0x250 ____fput+0xe/0x10 task_work_run+0x75/0xb0 do_exit+0x370/0xb80 do_group_exit+0x43/0xa0 get_signal+0x12d/0x820 arch_do_signal_or_restart+0xb2/0x870 ? __switch_to_asm+0x36/0x70 ? kern_select+0xc6/0x100 exit_to_user_mode_prepare+0xfc/0x170 syscall_exit_to_user_mode+0x2a/0x40 do_syscall_64+0x43/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe969cf5dd7 Code: Unable to access opcode bytes at RIP 0x7fe969cf5dad. Problem occurs for UVC class. During disconnecting the UVC class disable endpoints and then start dequeuing all requests. This leads to situation where requests are removed twice. The first one in cdnsp_gadget_ep_disable and the second in cdnsp_gadget_ep_dequeue function. Patch adds condition in cdnsp_gadget_ep_dequeue function which allows dequeue requests only from enabled endpoint. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-03-26Merge tag 'for-5.12/dm-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM verity target's optional argument processing. - Fix DM core's zoned model and zone sectors checks. - Fix spurious "detected capacity change" pr_info() when creating new DM device. - Fix DM ioctl out of bounds array access in handling of DM_LIST_DEVICES_CMD when no devices exist. * tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm ioctl: fix out of bounds array access when no devices dm: don't report "detected capacity change" on device creation dm table: Fix zoned model check and zone sectors check dm verity: fix DM_VERITY_OPTS_MAX value
2021-03-26dm ioctl: fix out of bounds array access when no devicesMikulas Patocka
If there are not any dm devices, we need to zero the "dev" argument in the first structure dm_name_list. However, this can cause out of bounds write, because the "needed" variable is zero and len may be less than eight. Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is too small to hold the "nl->dev" value. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-03-26Merge tag 'acpi-5.12-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a memory management regression in ACPICA, repair an ACPI blacklist entry damaged inadvertently during the 5.11 cycle and fix the bookkeeping of devices with the same primary device ID in the ACPI core. Specifics: - Make ACPICA use the same object cache consistently when allocating and freeing objects (Vegard Nossum) - Add a callback pointer removed inadvertently during the 5.11 cycle to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris Chiu) - Make the ACPI device enumeration core use IDA for creating names of ACPI device objects with the same primary device ID to avoid using duplicate device object names in some cases (Andy Shevchenko)" * tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Always create namespace nodes using acpi_ns_create_node() ACPI: scan: Use unique number for instance_no ACPI: video: Add missing callback back for Sony VPCEH3U1E
2021-03-26Merge tag 'pm-5.12-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix an issue related to device links in the runtime PM framework and debugfs usage in the Energy Model code. Specifics: - Modify the runtime PM device suspend to avoid suspending supplier devices before the consumer device's status changes to RPM_SUSPENDED (Rafael Wysocki) - Change the Energy Model code to prevent it from attempting to create its main debugfs directory too early (Lukasz Luba)" * tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: EM: postpone creating the debugfs dir till fs_initcall PM: runtime: Defer suspending suppliers
2021-03-26Merge tag 'soc-fixes-5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Too many fixes have accumulated in the soc tree, so this is a fairly large set. As usual, most of the fixes are for devicetree files, but there are also notable code changes for imx and omap regressions as well as some maintainer file updates. imx: - Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by independent PHY reset. - Add missing `dma-coherent` property for LayerScape device trees to fix a kernel BUG report. - Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with fw_devlink=on. - Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to fix the broken I2C GPIO recovery support. - Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval device tree to fix UBI filesystem mount failure. at91: - wrong phy address that blocks Ethernet use on boards with sama5d27 SoM1 - restrictive pin possibilities for sam9x60 omap: - Fix ocp interconnect bus access error reporting for omap_l3_noc by setting IRQF_NO_THREAD - Fix changed mmc slot order regression by adding mmc aliases for am335x - Fix dra7 reboot regression caused by invalid pcie reset map - Fix smartreflex init regression caused by dropped legacy data - Fix ti-sysc driver warning on unbind if reset is not deasserted - Fix flakey reset deassert for dra7 iva stm32: - MAINTAINER file updates broadcom: - brcmstb SoC ID build fix - MAINTAINER file updates" * tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Add Alain Volmat as STM32 I2C/SMBUS maintainer MAINTAINERS: Remove Vincent Abriou for STM/STI DRM drivers. MAINTAINERS: Update some st.com email addresses to foss.st.com ARM: dts: imx6ull: fix ubi filesystem mount failed ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry arm64: dts: ls1012a: mark crypto engine dma coherent arm64: dts: ls1043a: mark crypto engine dma coherent arm64: dts: ls1046a: mark crypto engine dma coherent ARM: imx: avic: Convert to using IRQCHIP_DECLARE ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C ARM: dts: at91-sama5d27_som1: fix phy address to 7 soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva bus: ti-sysc: Fix warning on unbind if reset is not deasserted ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7 MAINTAINERS: rectify BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER ARM: dts: am33xx: add aliases for mmc interfaces bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
2021-03-26Merge tag 'for-linus-5.12b-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains a small series with a more elegant fix of a problem which was originally fixed in rc2" * tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Revert "xen: fix p2m size in dom0 for disabled memory hotplug case" xen/x86: make XEN_BALLOON_MEMORY_HOTPLUG_LIMIT depend on MEMORY_HOTPLUG
2021-03-26Merge tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "As expected last week things were overly quiet so this week things seem to have caught up. It still isn't too major. msm and amdgpu lead the size here, the msm fixes are pretty varied across the driver, the amdgpu one is mostly the S0ix fixes with some other minor ones. Otherwise there are a few i915 fixes and one each for nouveau, etnaviv and rcar-du. msm: - pll fixes - shutdown hook fix - runtime resume fix - clear_oob fix - kms locking fix - display aux retry fix rcar-du: - warn_on in encoder init fix etnaviv: - Use FOLL_FORCE and FOLL_LONGTERM i915: - DisplayPort LTTPR fixes around link training and limiting it according to supported spec version. - Fix enabled_planes bitmask to really represent only logically enabled planes. - Fix DSS CTL registers for ICL DSI transcoders - Fix the GT fence revocation runtime PM logic. nouveau: - cursor size regression fix amdgpu: - S0ix fixes - Add PCI ID - Polaris PCIe DPM fix - Display fix for high refresh rate monitors" * tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm: (37 commits) drm/nouveau/kms/nve4-nv108: Limit cursors to 128x128 drm/i915: Fix the GT fence revocation runtime PM logic drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.x drm/amdgpu: Add additional Sienna Cichlid PCI ID drm/amd/pm: workaround for audio noise issue drm/i915/dsc: fix DSS CTL register usage for ICL DSI transcoders drm/i915: Fix enabled_planes bitmask drm/i915: Disable LTTPR support when the LTTPR rev < 1.4 drm/i915: Disable LTTPR support when the DPCD rev < 1.4 drm/i915/ilk-glk: Fix link training on links with LTTPRs drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume drm/amdgpu: skip kfd suspend/resume for S0ix drm/amdgpu: drop S0ix checks around CG/PG in suspend drm/amdgpu: skip CG/PG for gfx during S0ix drm/amdgpu: update comments about s0ix suspend/resume drm/amdgpu/swsmu: skip gfx cgpg on s0ix suspend drm/amdgpu: re-enable suspend phase 2 for S0ix drm/amdgpu: move s0ix check into amdgpu_device_ip_suspend_phase2 (v3) drm/amdgpu: clean up non-DC suspend/resume handling drm/amdgpu: don't evict vram on APUs for suspend to ram (v4) ...
2021-03-26cpufreq: Fix scaling_{available,boost}_frequencies_show() commentsGeert Uytterhoeven
The function names in the comment blocks for the functions scaling_available_frequencies_show() and scaling_boost_frequencies_show() do not match the actual names. Fixes: 6f19efc0a1ca08bc ("cpufreq: Add boost frequency support in core") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-26Merge branches 'acpi-video' and 'acpi-scan'Rafael J. Wysocki
* acpi-video: ACPI: video: Add missing callback back for Sony VPCEH3U1E * acpi-scan: ACPI: scan: Use unique number for instance_no
2021-03-26xen-blkback: don't leak persistent grants from xen_blkbk_map()Jan Beulich
The fix for XSA-365 zapped too many of the ->persistent_gnt[] entries. Ones successfully obtained should not be overwritten, but instead left for xen_blkbk_unmap_prepare() to pick up and put. This is XSA-371. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Wei Liu <wl@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-03-26soc: qcom-geni-se: Cleanup the code to remove proxy votesRoja Rani Yarubandi
This reverts commit 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") ICC core and platforms drivers supports sync_state feature, which ensures that the default ICC BW votes from the bootloader is not removed until all it's consumers are probes. The proxy votes were needed in case other QUP child drivers I2C, SPI probes before UART, they can turn off the QUP-CORE clock which is shared resources for all QUP driver, this causes unclocked access to HW from earlycon. Given above support from ICC there is no longer need to maintain proxy votes on QUP-CORE ICC node from QUP wrapper driver for early console usecase, the default votes won't be removed until real console is probed. Cc: stable@vger.kernel.org Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced") Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210324101836.25272-2-rojay@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26usb: dwc2: Prevent core suspend when port connection flag is 0Artur Petrosyan
In host mode port connection status flag is "0" when loading the driver. After loading the driver system asserts suspend which is handled by "_dwc2_hcd_suspend()" function. Before the system suspend the port connection status is "0". As result need to check the "port_connect_status" if it is "0", then skipping entering to suspend. Cc: <stable@vger.kernel.org> # 5.2 Fixes: 6f6d70597c15 ("usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE") Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210326102510.BDEDEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board.Artur Petrosyan
Increased the waiting timeout for HPRT0.PrtSusp register field to be set, because on HiKey 960 board HPRT0.PrtSusp wasn't generated with the existing timeout. Cc: <stable@vger.kernel.org> # 4.18 Fixes: 22bb5cfdf13a ("usb: dwc2: Fix host exit from hibernation flow.") Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/20210326102447.8F7FEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26usb: musb: Fix suspend with devices connected for a64Tony Lindgren
Pinephone running on Allwinner A64 fails to suspend with USB devices connected as reported by Bhushan Shah <bshah@kde.org>. Reverting commit 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") fixes the issue. Let's add suspend checks also for suspend after disconnect interrupt quirk handling like we already do elsewhere. Fixes: 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") Reported-by: Bhushan Shah <bshah@kde.org> Tested-by: Bhushan Shah <bshah@kde.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210324071142.42264-1-tony@atomide.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26usb: xhci-mtk: fix broken streams issue on 0.96 xHCIChunfeng Yun
The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disableWesley Cheng
Ensure that dep->flags are cleared until after stop active transfers is completed. Otherwise, the ENDXFER command will not be executed during ep disable. Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers") Cc: stable <stable@vger.kernel.org> Reported-and-tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1616610664-16495-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control()Shuah Khan
Fix shift out-of-bounds in vhci_hub_control() SetPortFeature handling. UBSAN: shift-out-of-bounds in drivers/usb/usbip/vhci_hcd.c:605:42 shift exponent 768 is too large for 32-bit type 'int' Reported-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20210324230654.34798-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26drivers: gpu: drm: xen_drm_front_drm_info is declared twiceWan Jiabing
struct xen_drm_front_drm_info has been declared. Remove the duplicate. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325061901.851273-1-wanjiabing@vivo.com
2021-03-26gpu/xen: Fix a use after free in xen_drm_drv_initLv Yunlong
In function displback_changed, has the call chain displback_connect(front_info)->xen_drm_drv_init(front_info). We can see that drm_info is assigned to front_info->drm_info and drm_info is freed in fail branch in xen_drm_drv_init(). Later displback_disconnect(front_info) is called and it calls xen_drm_drv_fini(front_info) cause a use after free by drm_info = front_info->drm_info statement. My patch has done two things. First fixes the fail label which drm_info = kzalloc() failed and still free the drm_info. Second sets front_info->drm_info to NULL to avoid uaf. Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210323014656.10068-1-lyl2019@mail.ustc.edu.cn
2021-03-26Merge tag 'drm-msm-fixes-2021-02-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes - pll fixes - shutdown hook fix - runtime resume fix - clear_oob fix - kms locking fix - display aux retry fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvmiMKRms_NVavD=NA_jbuexZUcqqL35ke7umqpp-TxMw@mail.gmail.com
2021-03-25Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-03-25 This series contains updates to virtchnl header file and i40e driver. Norbert removes added padding from virtchnl RSS structures as this causes issues when iterating over the arrays. Mateusz adds Asym_Pause as supported to allow these settings to be set as the hardware supports it. Eryk fixes an issue where encountering a VF reset alongside releasing VFs could cause a call trace. Arkadiusz moves TC setup before resource setup as previously it was possible to enter with a null q_vector causing a kernel oops. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25geneve: do not modify the shared tunnel info when PMTU triggers an ICMP replyAntoine Tenart
When the interface is part of a bridge or an Open vSwitch port and a packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When using the external mode (collect metadata) the source and destination addresses are reversed, so that Open vSwitch can match the packet against an existing (reverse) flow. But inverting the source and destination addresses in the shared ip_tunnel_info will make following packets of the flow to use a wrong destination address (packets will be tunnelled to itself), if the flow isn't updated. Which happens with Open vSwitch, until the flow times out. Fixes this by uncloning the skb's ip_tunnel_info before inverting its source and destination addresses, so that the modification will only be made for the PTMU packet, not the following ones. Fixes: c1a800e88dbf ("geneve: Support for PMTU discovery on directly bridged links") Tested-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25vxlan: do not modify the shared tunnel info when PMTU triggers an ICMP replyAntoine Tenart
When the interface is part of a bridge or an Open vSwitch port and a packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When using the external mode (collect metadata) the source and destination addresses are reversed, so that Open vSwitch can match the packet against an existing (reverse) flow. But inverting the source and destination addresses in the shared ip_tunnel_info will make following packets of the flow to use a wrong destination address (packets will be tunnelled to itself), if the flow isn't updated. Which happens with Open vSwitch, until the flow times out. Fixes this by uncloning the skb's ip_tunnel_info before inverting its source and destination addresses, so that the modification will only be made for the PTMU packet, not the following ones. Fixes: fc68c99577cc ("vxlan: Support for PMTU discovery on directly bridged links") Tested-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 11:27:17 +0000