| Age | Commit message (Collapse) | Author |
|---|
|
K2G doesn't have softreset feature. Instead of having every caller of
dispc_softreset() check for K2G, move the check into dispc_softreset(),
and make dispc_softreset() return 0 in case of K2G.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-6-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Return an error value from dispc_softreset() so that the caller can
handle the errors.
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-5-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
We do a DSS reset in the middle of the dispc_init(). While that happens
to work now, we should really make sure that e..g the fclk, which is
acquired only later in the function, is enabled when doing a reset. This
will be handled in a later patch, but for now, let's move the
dispc_softreset() call to the end of dispc_init(), which is a sensible
place for it anyway.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-4-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
No need to initialize the ret to 0 in dispc_softreset().
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-3-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Use runtime PM autosuspend feature, with 1s timeout, to avoid
unnecessary suspend-resume cycles when, e.g. the userspace temporarily
turns off the crtcs when configuring the outputs.
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-2-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync(), which
will handle error situations better. Also fix the return, as there
should be no reason for the current complex return.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-1-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Add support for the DSS controller on TI's AM62A7 SoC in the tidss
driver.
This controller has 2 video pipelines that can render 2 video planes on
over a screen, using the overlay managers. The output of the DSS comes
from video port 2 (VP2) in the form of RGB88 DPI signals, while the VP1
is tied off inside the SoC.
Also add and use a new type of VP, DISPC_VP_TIED_OFF, for the tied-off
VP1 of AM62A DSS.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20231108171619.978438-3-a-bhatia1@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
While a scatter-gather table having only 1 entry does imply it is
contiguous, it is a logic error to assume the inverse. Tables can have
more than 1 entry and still be contiguous. Use a proper check here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113205501.616927-1-afd@ti.com
|
|
If gpio_set_transitory() fails, we should free the GPIO again. Most
notably, the flag FLAG_REQUESTED has previously been set in
gpiod_request_commit(), and should be reset on failure.
To my knowledge, this does not affect any current users, since the
gpio_set_transitory() mainly returns 0 and -ENOTSUPP, which is converted
to 0. However the gpio_set_transitory() function calles the .set_config()
function of the corresponding GPIO chip and there are some GPIO drivers in
which some (unlikely) branches return other values like -EPROBE_DEFER,
and -EINVAL. In these cases, the above mentioned FLAG_REQUESTED would not
be reset, which results in the pin being blocked until the next reboot.
Fixes: e10f72bf4b3e ("gpio: gpiolib: Generalise state persistence beyond sleep")
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The variable phys is defined as (struct resource *) which aligns with
the printk format specifier %pr. Taking the address of it results in a
value of type (struct resource **) which is incompatible with the format
specifier %pr. Therefore, remove the address of operator (&).
Fixes: a5bf3cfce8cb ("iommu: Implement of_iommu_get_resv_regions()")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20231108062226.928985-1-danielmentz@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Avoid bool/int mismatches in state checker macros.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231129173317.1192269-2-jani.nikula@intel.com
|
|
Don't treat bools as integers.
v2: Rebase
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231129173317.1192269-1-jani.nikula@intel.com
|
|
{planes,vrr}_{enabling,disabling}() are supposed to indicate
whether the specific hardware feature is supposed to be enabling
or disabling. That can only makes sense if the pipe is active
overall. So check for that before we go poking at the hardware.
I think we're semi-safe currently on due to:
- intel_pre_plane_update() doesn't get called when the pipe
was not-active prior to the commit, but this is actually a bug.
This saves vrr_disabling(), and vrr_enabling() is called from
deeper down where we have already checked hw.active.
- active_planes mirrors the crtc's hw.active
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-2-ville.syrjala@linux.intel.com
(cherry picked from commit bc53c4d56eb24dbe56cd2c66ef4e9fc9393b1533)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The ACPI specification says:
"If an error occurs while obtaining the meter reading or if the value
is not available then an Integer with all bits set is returned"
Since the "integer" is 32 bits in case of the ACPI power meter,
userspace will get a power reading of 2^32 * 1000 miliwatts (~4.29 MW)
in case of such an error. This was discovered due to a lm_sensors
bugreport (https://github.com/lm-sensors/lm-sensors/issues/460).
Fix this by returning -ENODATA instead.
Tested-by: <urbinek@gmail.com>
Fixes: de584afa5e18 ("hwmon driver for ACPI 4.0 power meters")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231124182747.13956-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.7-2023-11-30:
amdgpu:
- DMUB fix
- DCN 3.5 fixes
- XGMI fix
- DCN 3.2 fixes
- Vangogh suspend fix
- NBIO 7.9 fix
- GFX11 golden register fix
- Backlight fix
- NBIO 7.11 fix
- IB test overflow fix
- DCN 3.1.4 fixes
- fix a runtime pm ref count
- Retimer fix
- ABM fix
- DCN 3.1.5 fix
- Fix AGP addressing
- Fix possible memory leak in SMU error path
- Make sure PME is enabled in D3
- Fix possible NULL pointer dereference in debugfs
- EEPROM fix
- GC 9.4.3 fix
amdkfd:
- IP version check fix
- Fix memory leak in pqm_uninit()
drm:
- Revert unexport of prime helpers for fd/handle conversion
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130213135.5083-1-alexander.deucher@amd.com
|
|
During hibernate sequence the source context might not have a clk_mgr.
So don't use it to look for DML2 support.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2980
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the unlikely event of radeon_ring_lock() failing, its errno return
value should be processed. This patch checks said return value and
prints a debug message in case of an error.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 48c0c902e2e6 ("drm/radeon/kms: add support for CP setup on SI")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It may be possible, albeit unlikely, to encounter integer overflow
during the multiplication of several unsigned int variables, the
result being assigned to a variable 'size' of wider type.
Prevent this potential behaviour by converting one of the multiples
to unsigned long.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 0242f74d29df ("drm/radeon: clean up CS functions in r100.c")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
While improbable, there may be a chance of hitting integer
overflow when the result of radeon_get_ib_value() gets shifted
left.
Avoid it by casting one of the operands to larger data type (u64).
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 1729dd33d20b ("drm/radeon/kms: r600 CS parser fixes")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
enable MCA debug mode on APU device by default.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For some SKU, rlc firmware should use different one
compared with the normal rlc firmware.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use amdgpu_ip_version() helper function to check ip version.
The ip version contains other information,
use the helper function to avoid reading wrong value.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and wifi.
Current release - regressions:
- neighbour: fix __randomize_layout crash in struct neighbour
- r8169: fix deadlock on RTL8125 in jumbo mtu mode
Previous releases - regressions:
- wifi:
- mac80211: fix warning at station removal time
- cfg80211: fix CQM for non-range use
- tools: ynl-gen: fix unexpected response handling
- octeontx2-af: fix possible buffer overflow
- dpaa2: recycle the RX buffer only after all processing done
- rswitch: fix missing dev_kfree_skb_any() in error path
Previous releases - always broken:
- ipv4: fix uaf issue when receiving igmp query packet
- wifi: mac80211: fix debugfs deadlock at device removal time
- bpf:
- sockmap: af_unix stream sockets need to hold ref for pair sock
- netdevsim: don't accept device bound programs
- selftests: fix a char signedness issue
- dsa: mv88e6xxx: fix marvell 6350 probe crash
- octeontx2-pf: restore TC ingress police rules when interface is up
- wangxun: fix memory leak on msix entry
- ravb: keep reverse order of operations in ravb_remove()"
* tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
net: ravb: Keep reverse order of operations in ravb_remove()
net: ravb: Stop DMA in case of failures on ravb_open()
net: ravb: Start TX queues after HW initialization succeeded
net: ravb: Make write access to CXR35 first before accessing other EMAC registers
net: ravb: Use pm_runtime_resume_and_get()
net: ravb: Check return value of reset_control_deassert()
net: libwx: fix memory leak on msix entry
ice: Fix VF Reset paths when interface in a failed over aggregate
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
tools: ynl-gen: always construct struct ynl_req_state
ethtool: don't propagate EOPNOTSUPP from dumps
ravb: Fix races between ravb_tx_timeout_work() and net related ops
r8169: prevent potential deadlock in rtl8169_close
r8169: fix deadlock on RTL8125 in jumbo mtu mode
neighbour: Fix __randomize_layout crash in struct neighbour
octeontx2-pf: Restore TC ingress police rules when interface is up
octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64
net: stmmac: xgmac: Disable FPE MMC interrupts
octeontx2-af: Fix possible buffer overflow
...
|
|
[Why]
Golden registers are PF-only registers on gfx11.
RLCG interface will return "out-of-range" under SRIOV VF.
[How]
Skip access gfx11 golden registers under SRIOV.
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- Avoid polling for the scmi_perf_domain on arm
* tag 'pmdomain-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: arm: Avoid polling for scmi_perf_domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix CQE error recovery path
MMC host:
- cqhci: Fix CQE error recovery path
- sdhci-pci-gli: Fix initialization of LPM
- sdhci-sprd: Fix enabling/disabling of the vqmmc regulator"
* tag 'mmc-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled
mmc: sdhci-pci-gli: Disable LPM during initialization
mmc: cqhci: Fix task clearing in CQE error recovery
mmc: cqhci: Warn of halt or task clear failure
mmc: block: Retry commands in CQE error recovery
mmc: block: Be sure to wait while busy in CQE error recovery
mmc: cqhci: Increase recovery halt timeout
mmc: block: Do not lose cache flush during CQE error recovery
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED fix from Lee Jones:
- Remove duplicate sysfs entry 'color' from LEDs class
* tag 'leds-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
leds: class: Don't expose color sysfs entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
- Fix for EFI unaccepted memory handling
* tag 'efi-urgent-for-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: Fix off-by-one when checking for overlapping ranges
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v6.7-rc4:
- Revert panel fixes as they require exporting device_is_dependent.
- Do not double add fences in dma_resv_add_fence.
- Fix GPUVM license identifier.
- Assorted nouveau fixes.
- Fix error check for nt36523.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/561f807e-f9d3-43c1-80d3-8b41ba83c9ec@linux.intel.com
|
|
There is a mechanism for reporting errors from fire and forget H2G
messages. This is the only way to find out about almost any error in
the GuC backend submission path. So it would be useful to know that it
is working.
v2: Fix some dumb over-complications and a couple of typos - review
feedback from Daniele.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114010016.234570-3-John.C.Harrison@Intel.com
|
|
Noticed that the hangcheck selftest is submitting a non-preemptoble
spinner. That means that even if the GuC does not die, the heartbeat
will still kick in and trigger a reset. Which is rather defeating the
purpose of the test - to verify that the heartbeat will kick in if the
GuC itself has died. The test is deliberately killing the GuC, so it
should never hit the case of a non-dead GuC. But it is not impossible
that the kill might fail at some future point due to other driver
re-work.
So, make the spinner pre-emptible. That way the heartbeat can get
through if the GuC is alive and context switching. Thus a reset only
happens if the GuC dies. Thus, if the kill should stop working the
test will now fail rather than claim to pass.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114010016.234570-2-John.C.Harrison@Intel.com
|
|
This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3.
These helper functions are needed for KFD to export and import DMABufs
the right way without duplicating the tracking of DMABufs associated with
GEM objects while ensuring that move notifier callbacks are working as
intended.
CC: Christian König <christian.koenig@amd.com>
CC: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some machines like the HP Omen 17 ck2000nf contain WMI blocks
with zero instances, so any WMI driver which tries to handle the
associated WMI device will fail.
Skip such WMI blocks to avoid confusing any WMI drivers.
Reported-by: Alexis Belmonte <alexbelm48@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218188
Fixes: bff431e49ff5 ("ACPI: WMI: Add ACPI-WMI mapping driver")
Tested-by: Alexis Belmonte <alexbelm48@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231129181654.5800-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
It was noticed when setting the Panfrost's DVFS device to the performant
governor, GPU frequency as reported by fdinfo had dropped to 0 permamently.
There are two separate issues causing this behaviour:
- Not initialising the device's current_frequency variable to its original
value during device probe().
- Updating said variable in Panfrost devfreq's get_dev_status() rather
than after the new OPP's frequency had been retrieved in target(), which
meant the old frequency would be assigned instead.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: f11b0417eec2 ("drm/panfrost: Add fdinfo support GPU load metrics")
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231125205438.375407-3-adrian.larumbe@collabora.com
|
|
A GEM object constructed from a dma-buf imported sgtable should be regarded
as being memory resident, because the dma-buf API mandates backing storage
to be allocated when attachment succeeds.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: 9ccdac7aa822 ("drm/panfrost: Add fdinfo support for memory stats")
Reported-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231125205438.375407-2-adrian.larumbe@collabora.com
|
|
On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet
MACs and PHYs it has been discovered that doing unbind/bind for ravb
driver in a loop leads to wrong speed and duplex for Ethernet links and
broken connectivity (the connectivity cannot be restored even with
bringing interface down/up). Before doing unbind/bind the Ethernet
interfaces were configured though systemd. The sh instructions used to
do unbind/bind were:
$ cd /sys/bus/platform/drivers/ravb/
$ while :; do echo 11c30000.ethernet > unbind ; \
echo 11c30000.ethernet > bind; done
It has been discovered that there is a race b/w IOCTLs initialized by
systemd at the response of success binding and the
"ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as
follows:
1/ as a result of bind success the user space open/configures the
interfaces tough an IOCTL; the following stack trace has been
identified on RZ/G3S:
Call trace:
dump_backtrace+0x9c/0x100
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x28
ravb_open+0x70/0xa58
__dev_open+0xf4/0x1e8
__dev_change_flags+0x198/0x218
dev_change_flags+0x2c/0x80
devinet_ioctl+0x640/0x708
inet_ioctl+0x1e4/0x200
sock_do_ioctl+0x50/0x108
sock_ioctl+0x240/0x358
__arm64_sys_ioctl+0xb0/0x100
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0xb8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x190/0x198
2/ this call may execute concurrently with ravb_remove() as the
unbind/bind operation was executed in a loop
3/ if the operation mode is changed to RESET (through
ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove())
while the above ravb_open() is in progress it may lead to MAC
(or PHY, or MAC-PHY connection, the right point hasn't been identified
at the moment) to be broken, thus the Ethernet connectivity fails to
restore.
The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC))
after unregister_netdev() to avoid resetting the controller while the
netdev interface is still registered.
To avoid future issues in ravb_remove(), the patch follows the proper order
of operations in ravb_remove(): reverse order compared with ravb_probe().
This avoids described races as the IOCTLs as well as unregister_netdev()
(called now at the beginning of ravb_remove()) calls rtnl_lock() before
continuing and IOCTLs check (though devinet_ioctl()) if device is still
registered just after taking the lock:
int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr)
{
// ...
rtnl_lock();
ret = -ENODEV;
dev = __dev_get_by_name(net, ifr->ifr_name);
if (!dev)
goto done;
// ...
done:
rtnl_unlock();
out:
return ret;
}
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In case ravb_phy_start() returns with error the settings applied in
ravb_dmac_init() are not reverted (e.g. config mode). For this call
ravb_stop_dma() on failure path of ravb_open().
Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ravb_phy_start() may fail. If that happens, the TX queues will remain
started. Thus, move the netif_tx_start_all_queues() after PHY is
successfully initialized.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
registers
Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the
description of CXR35 register (chapter "PHY interface select register
(CXR35)"): "After release reset, make write-access to this register before
making write-access to other registers (except MDIOMOD). Even if not need
to change the value of this register, make write-access to this register
at least one time. Because RGMII/MII MODE is recognized by accessing this
register".
The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S,
RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC
register that is to be configured.
Note [A] from chapter "PHY interface select register (CXR35)" specifies
the following:
[A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII
in APB Clock 100 MHz.
(1) To use RGMII interface, Set ‘H’03E8_0000’ to this register.
(2) To use MII interface, Set ‘H’03E8_0002’ to this register.
Take into account these indication.
Fixes: 1089877ada8d ("ravb: Add RZ/G2L MII interface support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
pm_runtime_get_sync() may return an error. In case it returns with an error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
reset_control_deassert() could return an error. Some devices cannot work
if reset signal de-assert operation fails. To avoid this check the return
code of reset_control_deassert() in ravb_probe() and take proper action.
Along with it, the free_netdev() call from the error path was moved after
reset_control_assert() on its own label (out_free_netdev) to free
netdev in case reset_control_deassert() fails.
Fixes: 0d13a1a464a0 ("ravb: Add reset support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the call to vmap() fails the "page_nr" is one element beyond the end
of the mips_data->pt_dma_addr[] and mips_data->pt_pages[] arrays.
The way that this is traditionally written is that we clean up the
partial loop iteration before the goto and then we can say
while (--i >= 0). At that point we know that all the elements thus
far are initialized so we don't need to have NULL checks.
Fixes: 927f3e0253c1 ("drm/imagination: Implement MIPS firmware processor and MMU support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a2d3210b-290f-4397-9c3e-efdcca94d8ac@moroto.mountain
|
|
The pvr_build_firmware_filename() function returns NULL on error. It
doesn't return error pointers.
Fixes: f99f5f3ea7ef ("drm/imagination: Add GPU ID parsing and firmware loading")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/384288de-a779-46c7-869d-b3c63462e12b@moroto.mountain
|
|
There is a cut and paste error so this code returns the wrong variable.
Fixes: 1f88f017e649 ("drm/imagination: Get GPU resources")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1649c66b-3eea-40d2-9687-592124f968cf@moroto.mountain
|
|
This is a hack around a bug exposed with the GSP code, I'm not sure
what is happening exactly, but it appears some of our flushes don't
result in proper tlb invalidation for out BAR2 and we get a BAR2
fault from GSP and it all dies.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130010852.4034774-1-airlied@gmail.com
|
|
Since pci_free_irq_vectors() set pdev->msix_enabled as 0 in the
calling of pci_msix_shutdown(), wx->msix_entries is never freed.
Reordering the lines to fix the memory leak.
Cc: stable@vger.kernel.org
Fixes: 3f703186113f ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20231128095928.1083292-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an error when an interface has the following conditions:
- PF is in an aggregate (bond)
- PF has VFs created on it
- bond is in a state where it is failed-over to the secondary interface
- A VF reset is issued on one or more of those VFs
The issue is generated by the originating PF trying to rebuild or
reconfigure the VF resources. Since the bond is failed over to the
secondary interface the queue contexts are in a modified state.
To fix this issue, have the originating interface reclaim its resources
prior to the tear-down and rebuild or reconfigure. Then after the process
is complete, move the resources back to the currently active interface.
There are multiple paths that can be used depending on what triggered the
event, so create a helper function to move the queues and use paired calls
to the helper (back to origin, process, then move back to active interface)
under the same lag_mutex lock.
Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless fixes:
- debugfs had a deadlock (removal vs. use of files),
fixes going through wireless ACKed by Greg
- support for HT STAs on 320 MHz channels, even if it's
not clear that should ever happen (that's 6 GHz), best
not to WARN()
- fix for the previous CQM fix that broke most cases
- various wiphy locking fixes
- various small driver fixes
* tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: use wiphy locked debugfs for sdata/link
wifi: mac80211: use wiphy locked debugfs helpers for agg_status
wifi: cfg80211: add locked debugfs wrappers
debugfs: add API to allow debugfs operations cancellation
debugfs: annotate debugfs handlers vs. removal with lockdep
debugfs: fix automount d_fsdata usage
wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap
wifi: avoid offset calculation on NULL pointer
wifi: cfg80211: hold wiphy mutex for send_interface
wifi: cfg80211: lock wiphy mutex for rfkill poll
wifi: cfg80211: fix CQM for non-range use
wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush
wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()
wifi: mt76: mt7925: fix typo in mt7925_init_he_caps
wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
====================
Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-11-30
We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 10 files changed, 66 insertions(+), 15 deletions(-).
The main changes are:
1) Fix AF_UNIX splat from use after free in BPF sockmap,
from John Fastabend.
2) Fix a syzkaller splat in netdevsim by properly handling offloaded
programs (and not device-bound ones), from Stanislav Fomichev.
3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint,
from Hou Tao.
4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink,
from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link
bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags()
netdevsim: Don't accept device bound programs
====================
Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mixture of kernel and user space lifecycle objects continues to be
complicated inside iommufd. The obj->destroy_rwsem is used to bring order
to the kernel driver destruction sequence but it cannot be sequenced right
with the other refcounts so we end up possibly UAF'ing:
BUG: KASAN: slab-use-after-free in __up_read+0x627/0x750 kernel/locking/rwsem.c:1342
Read of size 8 at addr ffff888073cde868 by task syz-executor934/6535
CPU: 1 PID: 6535 Comm: syz-executor934 Not tainted 6.6.0-rc7-syzkaller-00195-g2af9b20dbb39 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
__up_read+0x627/0x750 kernel/locking/rwsem.c:1342
iommufd_put_object drivers/iommu/iommufd/iommufd_private.h:149 [inline]
iommufd_vfio_ioas+0x46c/0x580 drivers/iommu/iommufd/vfio_compat.c:146
iommufd_fops_ioctl+0x347/0x4d0 drivers/iommu/iommufd/main.c:398
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__x64_sys_ioctl+0x18f/0x210 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
There are two races here, the more obvious one:
CPU 0 CPU 1
iommufd_put_object()
iommufd_destroy()
refcount_dec(&obj->users)
iommufd_object_remove()
kfree()
up_read(&obj->destroy_rwsem) // Boom
And there is also perhaps some possibility that the rwsem could hit an
issue:
CPU 0 CPU 1
iommufd_put_object()
iommufd_object_destroy_user()
refcount_dec(&obj->users);
down_write(&obj->destroy_rwsem)
up_read(&obj->destroy_rwsem);
atomic_long_or(RWSEM_FLAG_WAITERS, &sem->count);
tmp = atomic_long_add_return_release()
rwsem_try_write_lock()
iommufd_object_remove()
up_write(&obj->destroy_rwsem)
kfree()
clear_nonspinnable() // Boom
Fix this by reorganizing this again so that two refcounts are used to keep
track of things with a rule that users == 0 && shortterm_users == 0 means
no other threads have that memory. Put a wait_queue in the iommufd_ctx
object that is triggered when any sub object reaches a 0
shortterm_users. This allows the same wait for userspace ioctls to finish
behavior that the rwsem was providing.
This is weaker still than the prior versions:
- There is no bias on shortterm_users so if some thread is waiting to
destroy other threads can continue to get new read sides
- If destruction fails, eg because of an active in-kernel user, then
shortterm_users will have cycled to zero momentarily blocking new users
- If userspace races destroy with other userspace operations they
continue to get an EBUSY since we still can't intermix looking up an ID
and sleeping for its unref
In all cases these are things that userspace brings on itself, correct
programs will not hit them.
Fixes: 99f98a7c0d69 ("iommufd: IOMMUFD_DESTROY should not increase the refcount")
Link: https://lore.kernel.org/all/2-v2-ca9e00171c5b+123-iommufd_syz4_jgg@nvidia.com/
Reported-by: syzbot+d31adfb277377ef8fcba@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/00000000000055ef9a0609336580@google.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
