summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-11-29drm/amd/display: update pixel clock params after stream slice count change ↵Wenjing Liu
in context [why] When ODM slice count is changed, otg master pipe's pixel clock params is no longer valid as the value is dependent on ODM slice count. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: optimize RLC powerdown notification on VangoghPerry Yuan
The smu needs to get the rlc power down message to sync the rlc state with smu, the rlc state updating message need to be sent at while smu begin suspend sequence , otherwise SMU will crash while RLC state is not notified by driver, and rlc state probally changed after that notification, so it needs to notify rlc state to smu at the end of the suspend sequence in amdgpu_device_suspend() that can make sure the rlc state is correctly set to SMU. [ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff! [ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features. [ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features! [ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62 [ 110.884394] PM: suspend of devices aborted after 21213.620 msecs [ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs [ 110.884405] PM: Some devices failed to suspend, or early wake event detected Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: Retire query/reset_ras_err_status from gfx_v9_4_3Hawking Zhang
Not needed anymore. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: fix a pipe mapping error in dcn32_fpuWenjing Liu
[why] In dcn32 DML pipes are ordered the same as dc pipes but only for used pipes. For example, if dc pipe 1 and 2 are used, their dml pipe indices would be 0 and 1 respectively. However update_pipe_slice_table_with_split_flags doesn't skip indices for free pipes. This causes us to not reference correct dml pipe output when building pipe topology. [how] Use two variables to iterate dc and dml pipes respectively and only increment dml pipe index when current dc pipe is not free. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: add skip_implict_edp_power_control flag for dce110Ian Chen
If the link requests to skip implicit eDP power control, we should honor that request. Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Update DCN35 watermarksNicholas Kazlauskas
[Why & How] Update to the new values per HW team request. Affects both stutter and z8. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: update xgmi num links info post gc9.4.2Jonathan Kim
GC IP 9.4.2 and up support TA reporting of the number of xGMI links between peers. Tested-by: Vignesh Chander <vignesh.chander@amd.com> Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdkfd: Copy HW exception data to user eventDavid Yat Sin
Fixes issue where user events of type KFD_EVENT_TYPE_HW_EXCEPTION do not have valid data Signed-off-by: David Yat Sin <David.YatSin@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Add z-state support policy for dcn35Nicholas Kazlauskas
[Why] DML2 means that the dcn3x policy for calculating z-state support no longer runs from validate_bandwidth. This means we are unconditionally allowing Z8, the hardware default. [How] Port the policy over to DCN35, but with a few modifications: - Don't use min_dst_y_next_start as a check for Z8/Z10 allow - Add support for overriding the Z10 stutter period per ASIC - Cleanup the code to make the policy assignment more clear Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Include udelay when waiting for INBOX0 ACKAlvin Lee
When waiting for the ACK for INBOX0 message, we have to ensure to include the udelay for proper wait time Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Add new Replay command and Disabled Replay Timing ResyncDennis Chan
[why] To support dynamic switching for Replay timing sync mechanism. Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/pm: Add sysfs attribute to get pm metricsLijo Lazar
Add sysfs attribute to read power management metrics. A snapshot is captured to the buffer when the attribute is read. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/pm: Add pm metrics support to SMU v13.0.6Lijo Lazar
Add support to fetch PM metrics sample from SMU v13.0.6 Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/pm: Add support to fetch pm metrics sampleLijo Lazar
Add API support to fetch a snapshot of power management metrics from PMFW. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Remove redundant DRM device struct in amdgpu_dm_, mst_types.cSrinivasan Shanmugam
Declaration of 'struct drm_device *dev' is redundant, as 'connector->dev' & 'dev_get_drvdata(kdev)' can be directly passed to 'drm_to_adev', without any intermediate DRM device 'dev' variable Cc: Roman Li <roman.li@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd: Document device reset methodsAndré Almeida
Document what each amdgpu driver reset method does. Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29cpufreq/amd-pstate: Only print supported EPP values for performance governorAyush Jain
show_energy_performance_available_preferences() to show only supported values which is performance in performance governor policy. -------Before-------- $ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver amd-pstate-epp $ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_preference performance $ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_available_preferences default performance balance_performance balance_power power -------After-------- $ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver amd-pstate-epp $ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_preference performance $ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_available_preferences performance Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors") Suggested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Ayush Jain <ayush.jain3@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-11-29dm-flakey: start allocating with MAX_ORDERMikulas Patocka
Commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") changed the meaning of MAX_ORDER from exclusive to inclusive. So, we can allocate compound pages with up to 1 << MAX_ORDER pages. Reflect this change in dm-flakey and start trying to allocate compound pages with MAX_ORDER. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-11-29drm/i915/display: Fix IP version of the WAsBalasubramani Vivekanandan
WAs 14011508470, 14011503030 were applied on IP versions beyond which they are applicable. Fixed the IP version checks for these workarounds. Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231128102451.825242-1-balasubramani.vivekanandan@intel.com
2023-11-29dm-verity: align struct dm_verity_fec_io properlyMikulas Patocka
dm_verity_fec_io is placed after the end of two hash digests. If the hash digest has unaligned length, struct dm_verity_fec_io could be unaligned. This commit fixes the placement of struct dm_verity_fec_io, so that it's aligned. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: a739ff3f543a ("dm verity: add support for forward error correction") Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-11-29dm verity: don't perform FEC for failed readahead IOWu Bo
We found an issue under Android OTA scenario that many BIOs have to do FEC where the data under dm-verity is 100% complete and no corruption. Android OTA has many dm-block layers, from upper to lower: dm-verity dm-snapshot dm-origin & dm-cow dm-linear ufs DM tables have to change 2 times during Android OTA merging process. When doing table change, the dm-snapshot will be suspended for a while. During this interval, many readahead IOs are submitted to dm_verity from filesystem. Then the kverity works are busy doing FEC process which cost too much time to finish dm-verity IO. This causes needless delay which feels like system is hung. After adding debugging it was found that each readahead IO needed around 10s to finish when this situation occurred. This is due to IO amplification: dm-snapshot suspend erofs_readahead // 300+ io is submitted dm_submit_bio (dm_verity) dm_submit_bio (dm_snapshot) bio return EIO bio got nothing, it's empty verity_end_io verity_verify_io forloop range(0, io->n_blocks) // each io->nblocks ~= 20 verity_fec_decode fec_decode_rsb fec_read_bufs forloop range(0, v->fec->rsn) // v->fec->rsn = 253 new_read submit_bio (dm_snapshot) end loop end loop dm-snapshot resume Readahead BIOs get nothing while dm-snapshot is suspended, so all of them will cause verity's FEC. Each readahead BIO needs to verify ~20 (io->nblocks) blocks. Each block needs to do FEC, and every block needs to do 253 (v->fec->rsn) reads. So during the suspend interval(~200ms), 300 readahead BIOs trigger ~1518000 (300*20*253) IOs to dm-snapshot. As readahead IO is not required by userspace, and to fix this issue, it is best to pass readahead errors to upper layer to handle it. Cc: stable@vger.kernel.org Fixes: a739ff3f543a ("dm verity: add support for forward error correction") Signed-off-by: Wu Bo <bo.wu@vivo.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-11-29drm/i915: correct the input parameter on _intel_dsb_commit()heminhong
Current, the dewake_scanline variable is defined as unsigned int, an unsigned int variable that is always greater than or equal to 0. when _intel_dsb_commit function is called by intel_dsb_commit function, the dewake_scanline variable may have an int value. So the dewake_scanline variable is necessary to defined as an int. Fixes: f83b94d23770 ("drm/i915/dsb: Use DEwake to combat PkgC latency") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310052201.AnVbpgPr-lkp@intel.com/ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: heminhong <heminhong@kylinos.cn> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114024341.14524-1-heminhong@kylinos.cn
2023-11-29dm verity: initialize fec io before freeing itWu Bo
If BIO error, verity_end_io() can call verity_finish_io() before verity_fec_init_io(). Therefore, fec_io->rs is not initialized and may crash when doing memory freeing in verity_fec_finish_io(). Crash call stack: die+0x90/0x2b8 __do_kernel_fault+0x260/0x298 do_bad_area+0x2c/0xdc do_translation_fault+0x3c/0x54 do_mem_abort+0x54/0x118 el1_abort+0x38/0x5c el1h_64_sync_handler+0x50/0x90 el1h_64_sync+0x64/0x6c free_rs+0x18/0xac fec_rs_free+0x10/0x24 mempool_free+0x58/0x148 verity_fec_finish_io+0x4c/0xb0 verity_end_io+0xb8/0x150 Cc: stable@vger.kernel.org # v6.0+ Fixes: 5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature") Signed-off-by: Wu Bo <bo.wu@vivo.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-11-29drm/i915/irq: Improve error logging for unexpected DE Misc interruptsRahul Rameshbabu
Dump the iir value in hex when the interrupt is unexpected. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9652#note_2178501 Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231126214142.102106-1-sergeantsagara@protonmail.com
2023-11-29cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq updateWyes Karny
When amd_pstate is running, writing to scaling_min_freq and scaling_max_freq has no effect. These values are only passed to the policy level, but not to the platform level. This means that the platform does not know about the frequency limits set by the user. To fix this, update the min_perf and max_perf values at the platform level whenever the user changes the scaling_min_freq and scaling_max_freq values. Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors") Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-11-29drm/panel: nt36523: fix return value check in nt36523_probe()Yang Yingliang
mipi_dsi_device_register_full() never returns NULL pointer, it will return ERR_PTR() when it fails, so replace the check with IS_ERR(). Fixes: 0993234a0045 ("drm/panel: Add driver for Novatek NT36523") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231129090715.856263-1-yangyingliang@huaweicloud.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231129090715.856263-1-yangyingliang@huaweicloud.com
2023-11-29drm/panel: starry-2081101qfh032011-53g: Fine tune the panel power sequencexiazhengqiao
For the "starry, 2081101qfh032011-53g" panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 6069b66cd962 ("drm/panel: support for STARRY 2081101QFH032011-53G MIPI-DSI panel") Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.com
2023-11-29drm/i915: Clean up some DISPLAY_VER checksVille Syrjälä
Use the >= and < operators for the DISPLAY_VER checks everywhere. This is what most of the code does, but especially recently random pieces of code have started doing this differently for no good reason. Conversion done with the following cocci: @find@ expression i915; constant ver; @@ ( DISPLAY_VER(i915) <= ver | DISPLAY_VER(i915) > ver ) @script:python inc@ old_ver << find.ver; new_ver; @@ coccinelle.new_ver = str(int(old_ver) + 1) @@ expression find.i915; constant find.ver; identifier inc.new_ver; @@ ( - DISPLAY_VER(i915) <= ver + DISPLAY_VER(i915) < new_ver | - DISPLAY_VER(i915) > ver + DISPLAY_VER(i915) >= new_ver ) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-11-29drm/i915/mst: Reject modes that require the bigjoinerVille Syrjälä
We have no bigjoiner support in the MST code, so .mode_valid() pretending otherwise is just going to result black screens for users. Reject any mode that needs the joiner. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-11-29drm/i915/mst: Fix .mode_valid_ctx() return valuesVille Syrjälä
.mode_valid_ctx() returns an errno, not the mode status. Fix the code to do the right thing. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-11-29drm/i915: Skip some timing checks on BXT/GLK DSI transcodersVille Syrjälä
Apparently some BXT/GLK systems have DSI panels whose timings don't agree with the normal cpu transcoder hblank>=32 limitation. This is perhaps fine as there are no specific hblank/etc. limits listed for the BXT/GLK DSI transcoders. Move those checks out from the global intel_mode_valid() into into connector specific .mode_valid() hooks, skipping BXT/GLK DSI connectors. We'll leave the basic [hv]display/[hv]total checks in intel_mode_valid() as those seem like sensible upper limits regardless of the transcoder used. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720 Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-11-29drm/i915/psr: Include some basic PSR information in the state dumpVille Syrjälä
Currently no one can figure out what the PSR code is doing since we're including any of it in the basic state dump. Add at least the bare minimum there. v2: Also dump has_panel_replay (Jouni) Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231124082735.25470-1-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2023-11-29Merge tag 'pinctrl-v6.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Fix a really interesting potential core bug in the list iterator requireing the use of READ_ONCE() discovered when testing kernel compiles with clang. - Check devm_kcalloc() return value and an array bounds in the STM32 driver. - Fix an exotic string truncation issue in the s32cc driver, found by the kernel test robot (impressive!) - Fix an undocumented struct member in the cy8c95x0 driver. - Fix a symbol overlap with MIPS in the Lochnagar driver, MIPS defines a global symbol "RST" which is a bit too generic and collide with stuff. OK this one should be renamed too, we will fix that as well. - Fix erroneous branch taking in the Realtek driver. - Fix the mail address in MAINTAINERS for the s32g2 driver. * tag 'pinctrl-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: dt-bindings: pinctrl: s32g2: change a maintainer email address pinctrl: realtek: Fix logical error when finding descriptor pinctrl: lochnagar: Don't build on MIPS pinctrl: avoid reload of p state in list iteration pinctrl: cy8c95x0: Fix doc warning pinctrl: s32cc: Avoid possible string truncation pinctrl: stm32: fix array read out of bound pinctrl: stm32: Add check for devm_kcalloc
2023-11-29fbdev: Remove default file-I/O implementationsThomas Zimmermann
Drop the default implementations for file read, write and mmap operations. Each fbdev driver must now provide an implementation and select any necessary helpers. If no implementation has been set, fbdev returns an errno code to user space. The code is the same as if the operation had not been set in the file_operations struct. This change makes the fbdev helpers for I/O memory optional. Most systems only use system-memory framebuffers via DRM's fbdev emulation. v2: * warn once if I/O callbacks are missing (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-33-tzimmermann@suse.de
2023-11-29fbdev: Warn on incorrect framebuffer accessThomas Zimmermann
Test in framebuffer read, write and drawing helpers if FBINFO_VIRTFB has been set correctly. Framebuffers in I/O memory should only be accessed with the architecture's respective helpers. Framebuffers in system memory should be accessed with the regular load and store operations. Presumably not all drivers get this right, so we now warn about it. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-32-tzimmermann@suse.de
2023-11-29fbdev: Move default fb_mmap code into helper functionThomas Zimmermann
Move the default fb_mmap code for I/O address spaces into the helper function fb_io_mmap(). The helper can either be called via struct fb_ops.fb_mmap or as the default if no fb_mmap has been set. Also set the new helper in __FB_DEFAULT_IOMEM_OPS_MMAP. In the mid-term, fb_io_mmap() is supposed to become optional. Fbdev drivers will initialize their struct fb_ops.fb_mmap to the helper and select a corresponding Kconfig token. The helper can then be made optional at compile time. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-31-tzimmermann@suse.de
2023-11-29fbdev: Push pgprot_decrypted() into mmap implementationsThomas Zimmermann
If a driver sets struct fb_ops.fb_mmap, the fbdev core automatically calls pgprot_decrypted(). But the default fb_mmap code doesn't handle pgprot_decrypted(). Move the call to pgprot_decrypted() into each drivers' fb_mmap function. This only concerns fb_mmap functions for system and DMA memory. For I/O memory, which is the default case, nothing changes. The fb_mmap for I/O-memory can later be moved into a helper as well. DRM's fbdev emulation handles pgprot_decrypted() internally via the Prime helpers. Fbdev doesn't have to do anything in this case. In cases where DRM uses deferred I/O, this patch updates fb_mmap correctly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-30-tzimmermann@suse.de
2023-11-29fbdev: Remove trailing whitespacesThomas Zimmermann
Fix coding style. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-29-tzimmermann@suse.de
2023-11-29fbdev: Rename FB_SYS_FOPS token to FB_SYSMEM_FOPSThomas Zimmermann
Rename the token to harmonize naming among various helpers. For example, I/O-memory helpers use FB_IOMEM_FOPS. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-28-tzimmermann@suse.de
2023-11-29staging/sm750fb: Initialize fb_ops with fbdev macrosThomas Zimmermann
Initialize all instances of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default I/O-memory-based implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-27-tzimmermann@suse.de
2023-11-29staging/sm750fb: Declare fb_ops as constantThomas Zimmermann
Split up lynxfb_ops and declare each as constant. The fb_ops instance used to be modified while initializing the driver. It is now constant and the driver picks the correct instance, depending on the settings for acceleration and cursor support. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-staging@lists.linux.dev Acked-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-26-tzimmermann@suse.de
2023-11-29fbdev/cyber2000fb: Initialize fb_ops with fbdev macrosThomas Zimmermann
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default I/O-memory-based implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-25-tzimmermann@suse.de
2023-11-29fbdev/wm8505fb: Initialize fb_ops to fbdev I/O-memory helpersThomas Zimmermann
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in DMA-able address space. This explictily sets the read/write, draw and mmap callbacks to the correct default implementation. Also select the necessary helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requireing the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. Set the callbacks via macros. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-24-tzimmermann@suse.de
2023-11-29fbdev/vt8500lcdfb: Initialize fb_ops with fbdev macrosThomas Zimmermann
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in DMA-able virtual address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default I/O-memory-based implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-23-tzimmermann@suse.de
2023-11-29fbdev/clps711x-fb: Initialize fb_ops with fbdev macrosThomas Zimmermann
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary helpers in Kconfig. The driver previously selected drawing ops for system memory although it operates on I/O memory. Fixed now. Fbdev drivers sometimes rely on the callbacks being NULL for a default I/O-memory-based implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-22-tzimmermann@suse.de
2023-11-29media/ivtvfb: Initialize fb_ops to fbdev I/O-memory helpersThomas Zimmermann
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. This explictily sets the read/write, draw and mmap callbacks to the correct default implementation. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requireing the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. Set the callbacks via macros. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-media@vger.kernel.org Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-21-tzimmermann@suse.de
2023-11-29fbdev/ps3fb: Initialize fb_ops with fbdev macrosThomas Zimmermann
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in virtual address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default I/O-memory-based implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-20-tzimmermann@suse.de
2023-11-29fbdev/ps3fb: Set FBINFO_VIRTFB flagThomas Zimmermann
The ps3fb driver operates on system memory. Mark the framebuffer accordingly. Helpers operating on the framebuffer memory will test for the presence of this flag. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-19-tzimmermann@suse.de
2023-11-29fbdev/au1200fb: Initialize fb_ops with fbdev macrosThomas Zimmermann
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in DMA-able virtual address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default I/O-memory-based implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-18-tzimmermann@suse.de
2023-11-29fbdev/au1200fb: Set FBINFO_VIRTFB flagThomas Zimmermann
The au1200fb driver operates on DMA-able system memory. Mark the framebuffer accordingly. Helpers operating on the framebuffer memory will test for the presence of this flag. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-17-tzimmermann@suse.de
generated by cgit (git 2.34.1) at 2025-09-23 23:22:44 +0000