| Age | Commit message (Collapse) | Author |
|---|
|
Have phylib keep track of the EEE configuration. This simplifies the
MAC drivers, in that they don't need to store it.
Future patches to phylib will also make use of this information to
further simplify the MAC drivers.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240302195306.3207716-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MAC drivers which support EEE need to know the results of the EEE
auto-neg in order to program the hardware to perform EEE or not. The
oddly named phy_init_eee() can be used to determine this, it returns 0
if EEE should be used, or a negative error code,
e.g. -EOPPROTONOTSUPPORT if the PHY does not support EEE or negotiate
resulted in it not being used.
However, many MAC drivers get this wrong. Add phydev->enable_tx_lpi
which indicates the result of the autoneg for EEE, including if EEE is
administratively disabled with ethtool. The MAC driver can then access
this in the same way as link speed and duplex in the adjust link
callback. If enable_tx_lpi is true, the MAC should send low power
indications and does not need to consider anything else with respect
to EEE.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240302195306.3207716-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This bug was noticed while re-implementing parts of the kernel
driver in userspace using spidev. The goal was to enable some
of the errata workarounds that Microchip describes in their
errata sheet [1].
Both the errata sheet and the regular datasheet of e.g. the KSZ8795
imply that you need to do this for indirect register accesses:
- write a 16-bit value to a control register pair (this value
consists of the indirect register table, and the offset inside
the table)
- either read or write an 8-bit value from the data storage
register (indicated by REG_IND_BYTE in the kernel)
The current implementation has the order swapped. It can be
proven, by reading back some indirect register with known content
(the EEE register modified in ksz8_handle_global_errata() is one of
these), that this implementation does not work.
Private discussion with Oleksij Rempel of Pengutronix has revealed
that the workaround was apparantly never tested on actual hardware.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/Errata/KSZ87xx-Errata-DS80000687C.pdf
Signed-off-by: Tobias Jakobi (Compleo) <tobias.jakobi.compleo@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 7b6e6235b664 ("net: dsa: microchip: ksz8795: handle eee specif erratum")
Link: https://lore.kernel.org/r/20240304154135.161332-1-tobias.jakobi.compleo@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Older versions of GCC really want to know the full definition
of the type involved in rcu_assign_pointer().
struct dpll_pin is defined in a local header, net/core can't
reach it. Move all the netdev <> dpll code into dpll, where
the type is known. Otherwise we'd need multiple function calls
to jump between the compilation units.
This is the same problem the commit under fixes was trying to address,
but with rcu_assign_pointer() not rcu_dereference().
Some of the exports are not needed, networking core can't
be a module, we only need exports for the helpers used by
drivers.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/35a869c8-52e8-177-1d4d-e57578b99b6@linux-m68k.org/
Fixes: 640f41ed33b5 ("dpll: fix build failure due to rcu_dereference_check() on unknown type")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240305013532.694866-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240304183810.1474883-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the tun/tap driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240304183810.1474883-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 9b0ed890ac2a ("bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPY")
changed the driver from reporting everything as supported before a device
was bonded into having the driver report that no XDP feature is supported
until a real device is bonded as it seems to be more truthful given
eventually real underlying devices decide what XDP features are supported.
The change however did not take into account when all slave devices get
removed from the bond device. In this case after 9b0ed890ac2a, the driver
keeps reporting a feature mask of 0x77, that is, NETDEV_XDP_ACT_MASK &
~NETDEV_XDP_ACT_XSK_ZEROCOPY whereas it should have reported a feature
mask of 0.
Fix it by resetting XDP feature flags in the same way as if no XDP program
is attached to the bond device. This was uncovered by the XDP bond selftest
which let BPF CI fail. After adjusting the starting masks on the latter
to 0 instead of NETDEV_XDP_ACT_MASK the test passes again together with
this fix.
Fixes: 9b0ed890ac2a ("bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPY")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Prashant Batra <prbatra.mail@gmail.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240305090829.17131-1-daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This property is documented to have a special format which exposes all
available behaviours and the currently active one at the same time. For
this special format some helpers are provided.
When the charge_behaviour property was added in
1b0b6cc8030d ("power: supply: add charge_behaviour attributes"), it did
not update the default logic in in power_supply_sysfs.c to use the
format helpers. Thus by default only the currently active behaviour
is printed. This fixes the default logic to follow the documented
format.
There is currently only one in-tree drivers exposing charge behaviours -
thinkpad_acpi, which is not affected by the change, as it directly uses
the helpers and does not use the power_supply_sysfs.c logic.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240303-power_supply-charge_behaviour_prop-v2-3-8ebb0a7c2409@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
By moving the conditional into the default-branch of the switch new
additions to the switch won't have to bypass the conditional.
This makes it easier to implement those special cases like the upcoming
change to the formatting of "charge_behaviour".
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/lkml/53082075-852f-4698-b354-ed30e7fd2683@redhat.com/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240303-power_supply-charge_behaviour_prop-v2-2-8ebb0a7c2409@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The charge_behaviours property is meant as a control-knob that can be
changed by the user.
Page 23 of [0] which documents the flag CHG_INH as follows:
CHG_INH : Charge Inhibit When the current is more than or equal to charge
threshold current,
charge inhibit temperature (upper/lower limit) ：1
charge permission temperature or the current is
less than charge threshold current ：0
So this is pure read-only information which is better represented as
POWER_SUPPLY_STATUS_NOT_CHARGING.
[0] https://product.minebeamitsumi.com/en/product/category/ics/battery/fuel_gauge/parts/download/__icsFiles/afieldfile/2023/07/12/1_download_01_12.pdf
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240303-power_supply-charge_behaviour_prop-v2-1-8ebb0a7c2409@weissschuh.net
Fixes: e39257cde7e8 ("power: supply: mm8013: Add more properties")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
As reported by the kernel test robot, 'power_supply_attr_group' is defined
but not used when CONFIG_SYSFS is not set. Sebastian suggested that the
correct fix implemented by this patch, instead of my attempt in commit
ea4367c40c79 ("power: supply: core: move power_supply_attr_group into #ifdef
block"), is to define power_supply_attr_groups in power_supply_sysfs.c and
expose it in the power_supply.h header. For the case where CONFIG_SYSFS=n,
define it as NULL.
Suggested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: ea4367c40c79 ("power: supply: core: move power_supply_attr_group into #ifdef block")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403021518.SUQzk3oA-lkp@intel.com/
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240303-class_cleanup-power-v2-1-e248b7128519@marliere.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Technically the sysfs attributes should be initialized
before the class is registered, since that will use them.
As a nice side effect this nicely simplifies the code,
since it allows dropping the helper variable.
Reviewed-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240301-psy-class-cleanup-v1-2-aebe8c4b6b08@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Introduce power_supply_for_each_device(), which is a wrapper
for class_for_each_device() using the power_supply_class and
going through all devices.
This allows making the power_supply_class itself a local
variable, so that drivers cannot mess with it and simplifies
the code slightly.
Reviewed-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240301-psy-class-cleanup-v1-1-aebe8c4b6b08@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The pinctrl_add_gpio_range() function is deprecated add a comment so
people don't accidentally use it in new code.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/533a7a10-c6eb-4ebe-adf1-f8dc95ae8d33@moroto.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
EPROBE_DEFER error returns are not really critical, since they cancel
the probe process, but the kernel will return later and retry.
However, depending on the probe order, this might issue quite some
verbatim and scary, though pointless messages:
[ 2.388731] 300b000.pinctrl: pin-224 (5000000.serial) status -517
[ 2.397321] 300b000.pinctrl: could not request pin 224 (PH0) from group PH0 on device 300b000.pinctrl
Replace dev_err() with dev_err_probe(), which not only drops the
priority of the message from error to debug, but also puts some text
into debugfs' devices_deferred file, for later reference.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240305143859.2449147-1-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The Awinic AW9523(B) is a multi-function I2C gpio expander in a
TQFN-24L package, featuring PWM (max 37mA per pin, or total max
power 3.2Watts) for LED driving capability.
It has two ports with 8 pins per port (for a total of 16 pins),
configurable as either PWM with 1/256 stepping or GPIO input/output,
1.8V logic input; each GPIO can be configured as input or output
independently from each other.
This IC also has an internal interrupt controller, which is capable
of generating an interrupt for each GPIO, depending on the
configuration, and will raise an interrupt on the INTN pin to
advertise this to an external interrupt controller.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20210624214458.68716-2-mail@david-bauer.net
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240301-awinic-aw9523-v8-1-7ec572f5dfb4@linaro.org
|
|
The deferred_reset logic was added to vfio migration drivers to prevent
a circular locking dependency with respect to mm_lock and state mutex.
This is mainly because of the copy_to/from_user() functions(which takes
mm_lock) invoked under state mutex. But for HiSilicon driver, the only
place where we now hold the state mutex for copy_to_user is during the
PRE_COPY IOCTL. So for pre_copy, release the lock as soon as we have
updated the data and perform copy_to_user without state mutex. By this,
we can get rid of the deferred_reset logic.
Link: https://lore.kernel.org/kvm/20240220132459.GM13330@nvidia.com/
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240229091152.56664-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
pci_dev_resource_resize_attr(n) macro is invoked for six resources,
creating a large footprint function for each resource.
Rework the macro to only create a function that calls a helper function so
the compiler can decide if it warrants to inline the function or not.
With x86_64 defconfig, this saves roughly 2.5kB:
$ scripts/bloat-o-meter drivers/pci/pci-sysfs.o{.old,.new}
add/remove: 1/0 grow/shrink: 0/6 up/down: 512/-2934 (-2422)
Function old new delta
__resource_resize_store - 512 +512
resource5_resize_store 503 14 -489
resource4_resize_store 503 14 -489
resource3_resize_store 503 14 -489
resource2_resize_store 503 14 -489
resource1_resize_store 503 14 -489
resource0_resize_store 500 11 -489
Total: Before=13399, After=10977, chg -18.08%
(The compiler seemingly chose to still inline __resource_resize_show()
which is fine, those functions are not very complex/large.)
Link: https://lore.kernel.org/r/20240222114607.1837-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Commit d9c8bea179a6 ("PCI: Remove unused IORESOURCE_ROM_COPY and
IORESOURCE_ROM_BIOS_COPY") removed pci_cleanup_rom(), but retained
its declaration in pci.h.
Remove it.
Link: https://lore.kernel.org/r/fc30de5276e21d5a3ebcb7e58a8b43e399f7e6e6.1698668982.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
|
|
It is possible to enable CONFIG_PCI but disable CONFIG_SYSFS and for
space-constrained devices such as routers, such a configuration may
actually make sense.
However pci-sysfs.c is compiled even if CONFIG_SYSFS is disabled,
unnecessarily increasing the kernel's size.
To rectify that:
* Move pci_mmap_fits() to mmap.c. It is not only needed by
pci-sysfs.c, but also proc.c.
* Move pci_dev_type to probe.c and make it private. It references
pci_dev_attr_groups in pci-sysfs.c. Make that public instead for
consistency with pci_dev_groups, pcibus_groups and pci_bus_groups,
which are likewise public and referenced by struct definitions in
pci-driver.c and probe.c.
* Define pci_dev_groups, pci_dev_attr_groups, pcibus_groups and
pci_bus_groups to NULL if CONFIG_SYSFS is disabled. Provide empty
static inlines for pci_{create,remove}_legacy_files() and
pci_{create,remove}_sysfs_dev_files().
Result:
vmlinux size is reduced by 122996 bytes in my arm 32-bit test build.
Link: https://lore.kernel.org/r/85ca95ae8e4d57ccf082c5c069b8b21eb141846e.1698668982.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
|
|
This is the second half of fixes for dmraid. The first half is available
at [1].
This set contains fixes:
- reshape can start unexpected, cause data corruption, patch 1,5,6;
- deadlocks that reshape concurrent with IO, patch 8;
- a lockdep warning, patch 9;
For all the dmraid related tests in lvm2 suite, there is no new
regressions compared against 6.6 kernels (which is good baseline before
recent regressions).
[1] https://lore.kernel.org/all/CAPhsuW7u1UKHCDOBDhD7DzOVtkGemDz_QnJ4DUq_kSN-Q3G66Q@mail.gmail.com/
* dmraid-fix-6.9:
dm-raid: fix lockdep waring in "pers->hot_add_disk"
dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape
dm-raid: add a new helper prepare_suspend() in md_personality
md/dm-raid: don't call md_reap_sync_thread() directly
dm-raid: really frozen sync_thread during suspend
md: add a new helper reshape_interrupted()
md: export helper md_is_rdwr()
md: export helpers to stop sync_thread
md: don't clear MD_RECOVERY_FROZEN for new dm-raid until resume
|
|
The lockdep assert is added by commit a448af25becf ("md/raid10: remove
rcu protection to access rdev from conf") in print_conf(). And I didn't
notice that dm-raid is calling "pers->hot_add_disk" without holding
'reconfig_mutex'.
"pers->hot_add_disk" read and write many fields that is protected by
'reconfig_mutex', and raid_resume() already grab the lock in other
contex. Hence fix this problem by protecting "pers->host_add_disk"
with the lock.
Fixes: 9092c02d9435 ("DM RAID: Add ability to restore transiently failed devices on resume")
Fixes: a448af25becf ("md/raid10: remove rcu protection to access rdev from conf")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-10-yukuai1@huaweicloud.com
|
|
with reshape
For raid456, if reshape is still in progress, then IO across reshape
position will wait for reshape to make progress. However, for dm-raid,
in following cases reshape will never make progress hence IO will hang:
1) the array is read-only;
2) MD_RECOVERY_WAIT is set;
3) MD_RECOVERY_FROZEN is set;
After commit c467e97f079f ("md/raid6: use valid sector values to determine
if an I/O should wait on the reshape") fix the problem that IO across
reshape position doesn't wait for reshape, the dm-raid test
shell/lvconvert-raid-reshape.sh start to hang:
[root@fedora ~]# cat /proc/979/stack
[<0>] wait_woken+0x7d/0x90
[<0>] raid5_make_request+0x929/0x1d70 [raid456]
[<0>] md_handle_request+0xc2/0x3b0 [md_mod]
[<0>] raid_map+0x2c/0x50 [dm_raid]
[<0>] __map_bio+0x251/0x380 [dm_mod]
[<0>] dm_submit_bio+0x1f0/0x760 [dm_mod]
[<0>] __submit_bio+0xc2/0x1c0
[<0>] submit_bio_noacct_nocheck+0x17f/0x450
[<0>] submit_bio_noacct+0x2bc/0x780
[<0>] submit_bio+0x70/0xc0
[<0>] mpage_readahead+0x169/0x1f0
[<0>] blkdev_readahead+0x18/0x30
[<0>] read_pages+0x7c/0x3b0
[<0>] page_cache_ra_unbounded+0x1ab/0x280
[<0>] force_page_cache_ra+0x9e/0x130
[<0>] page_cache_sync_ra+0x3b/0x110
[<0>] filemap_get_pages+0x143/0xa30
[<0>] filemap_read+0xdc/0x4b0
[<0>] blkdev_read_iter+0x75/0x200
[<0>] vfs_read+0x272/0x460
[<0>] ksys_read+0x7a/0x170
[<0>] __x64_sys_read+0x1c/0x30
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
This is because reshape can't make progress.
For md/raid, the problem doesn't exist because register new sync_thread
doesn't rely on the IO to be done any more:
1) If array is read-only, it can switch to read-write by ioctl/sysfs;
2) md/raid never set MD_RECOVERY_WAIT;
3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold
'reconfig_mutex', hence it can be cleared and reshape can continue by
sysfs api 'sync_action'.
However, I'm not sure yet how to avoid the problem in dm-raid yet. This
patch on the one hand make sure raid_message() can't change
sync_thread() through raid_message() after presuspend(), on the other
hand detect the above 3 cases before wait for IO do be done in
dm_suspend(), and let dm-raid requeue those IO.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-9-yukuai1@huaweicloud.com
|
|
There are no functional changes for now, prepare to fix a deadlock for
dm-raid456.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-8-yukuai1@huaweicloud.com
|
|
Currently md_reap_sync_thread() is called from raid_message() directly
without holding 'reconfig_mutex', this is definitely unsafe because
md_reap_sync_thread() can change many fields that is protected by
'reconfig_mutex'.
However, hold 'reconfig_mutex' here is still problematic because this
will cause deadlock, for example, commit 130443d60b1b ("md: refactor
idle/frozen_sync_thread() to fix deadlock").
Fix this problem by using stop_sync_thread() to unregister sync_thread,
like md/raid did.
Fixes: be83651f0050 ("DM RAID: Add message/status support for changing sync action")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-7-yukuai1@huaweicloud.com
|
|
1) commit f52f5c71f3d4 ("md: fix stopping sync thread") remove
MD_RECOVERY_FROZEN from __md_stop_writes() and doesn't realize that
dm-raid relies on __md_stop_writes() to frozen sync_thread
indirectly. Fix this problem by adding MD_RECOVERY_FROZEN in
md_stop_writes(), and since stop_sync_thread() is only used for
dm-raid in this case, also move stop_sync_thread() to
md_stop_writes().
2) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen,
it only prevent new sync_thread to start, and it can't stop the
running sync thread; In order to frozen sync_thread, after seting the
flag, stop_sync_thread() should be used.
3) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use
it as condition for md_stop_writes() in raid_postsuspend() doesn't
look correct. Consider that reentrant stop_sync_thread() do nothing,
always call md_stop_writes() in raid_postsuspend().
4) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime,
and if MD_RECOVERY_FROZEN is cleared while the array is suspended,
new sync_thread can start unexpected. Fix this by disallow
raid_message() to change sync_thread status during suspend.
Note that after commit f52f5c71f3d4 ("md: fix stopping sync thread"), the
test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(),
and with previous fixes, the test won't hang there anymore, however, the
test will still fail and complain that ext4 is corrupted. And with this
patch, the test won't hang due to stop_sync_thread() or fail due to ext4
is corrupted anymore. However, there is still a deadlock related to
dm-raid456 that will be fixed in following patches.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/e5e8afe2-e9a8-49a2-5ab0-958d4065c55e@redhat.com/
Fixes: 1af2048a3e87 ("dm raid: fix deadlock caused by premature md_stop_writes()")
Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Fixes: f52f5c71f3d4 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-6-yukuai1@huaweicloud.com
|
|
The helper will be used for dm-raid456 later to detect the case that
reshape can't make progress.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-5-yukuai1@huaweicloud.com
|
|
There are no functional changes for now, prepare to fix a deadlock for
dm-raid456.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-4-yukuai1@huaweicloud.com
|
|
Add new helpers:
void md_idle_sync_thread(struct mddev *mddev);
void md_frozen_sync_thread(struct mddev *mddev);
void md_unfrozen_sync_thread(struct mddev *mddev);
The helpers will be used in dm-raid in later patches to fix regressions
and prevent calling md_reap_sync_thread() directly.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-3-yukuai1@huaweicloud.com
|
|
After commit 9dbd1aa3a81c ("dm raid: add reshaping support to the
target") raid_ctr() will set MD_RECOVERY_FROZEN before md_run() and
expect to keep array frozen until resume. However, md_run() will clear
the flag by setting mddev->recovery to 0.
Before commit 1baae052cccd ("md: Don't ignore suspended array in
md_check_recovery()"), dm-raid actually relied on suspending to prevent
starting new sync_thread.
Fix this problem by keeping 'MD_RECOVERY_FROZEN' for dm-raid in
md_run().
Fixes: 1baae052cccd ("md: Don't ignore suspended array in md_check_recovery()")
Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-2-yukuai1@huaweicloud.com
|
|
This reverts commit bed9e27baf52a09b7ba2a3714f1e24e17ced386d.
The original set [1][2] was expected to undo a suboptimal fix in [2], and
replace it with a better fix [1]. However, as reported by Dan Moulding [2]
causes an issue with raid5 with journal device.
Revert [2] for now to close the issue. We will follow up on another issue
reported by Juxiao Bi, as [2] is expected to fix it. We believe this is a
good trade-off, because the latter issue happens less freqently.
In the meanwhile, we will NOT revert [1], as it contains the right logic.
[1] commit d6e035aad6c0 ("md: bypass block throttle for superblock update")
[2] commit bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
Reported-by: Dan Moulding <dan@danm.net>
Closes: https://lore.kernel.org/linux-raid/20240123005700.9302-1-dan@danm.net/
Fixes: bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
Cc: stable@vger.kernel.org # v5.19+
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240125082131.788600-1-song@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Fix P2SB regression causing ACPI errors and high CPU load
- Fix error return path in amd_pmf_init_smart_pc()
* tag 'platform-drivers-x86-v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Fix missing error code in amd_pmf_init_smart_pc()
platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR
|
|
Exynos850 has the same version of USI SPI (v2.1) as GS101.
Drop the fifo_lvl_mask and rx_lvl_offset and switch to the new port
config data.
Backward compatibility with DT is not broken because when alises are
set:
- the SPI core will set the bus number according to the alias ID
- the FIFO depth is always the same size for exynos850 (64 bytes) no
matter the alias ID number.
Advantages of the change:
- drop dependency on the OF alias ID.
- FIFO depth is inferred from the compatible. Exynos850 integrates 3 SPI
IPs, all with 64 bytes FIFO depths.
- use full mask for SPI_STATUS.{RX, TX}_FIFO_LVL fields. Using partial
masks is misleading and can hide problems of the driver logic.
Just compiled tested.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-13-tudor.ambarus@linaro.org
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop the fifo_lvl_mask and rx_lvl_offset and switch to the new port
config data.
Advantages of the change:
- drop dependency on the OF alias ID.
- FIFO depth is inferred from the compatible. GS101 integrates 16 SPI
IPs, all with 64 bytes FIFO depths.
- use full mask for SPI_STATUS.{RX, TX}_FIFO_LVL fields. Using partial
masks is misleading and can hide problems of the driver logic.
S3C64XX_SPI_ST_TX_FIFO_RDY_V2 was defined based on the USI's
SPI_VERSION.USI_IP_VERSION register field, which has value 2 at reset.
MAX_SPI_PORTS is updated to reflect the maximum number of ports for the
rest of the compatibles.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-12-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Deprecate fifo_lvl_mask, rx_lvl_offset and port_id. One shall use
{rx, tx}_fifomask instead. Add messages to each port configuration.
Suggested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-11-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Compatibles that set ``port_conf->{rx, tx}_fifomask`` are now safe to
get rid of the OF alias ID dependency. Let the driver probe even without
the alias for these.
With this we also protect the FIFO_LVL_MASK calls from
s3c64xx_spi_set_fifomask().
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-10-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Prepare driver to get rid of the of alias ID dependency. Split the
port_id logic into a dedicated method.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-9-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Let the core determine the bus number, either by getting the alias ID
(as the driver forces now), or by allocating a dynamic bus number when
the alias is absent. Prepare the driver to allow dt aliases to be
absent.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-8-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are SoCs that use the same FIFO depth for all the instances of the
SPI IP. See the fifo_lvl_mask defined for gs101 for example:
.fifo_lvl_mask = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f,
0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f},
Instead of specifying the FIFO depth with the same value for all 16
nodes in this case, allow such SoCs to infer the FIFO depth from the
compatible. There are other SoCs than can benefit of this, see:
{gs101, fsd, exynos850, s3c641, s3c2443}_spi_port_config.
The FIFO depth inferred from the compatible has a higher precedence than
the one that might be specified via device tree, the driver shall know
better.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-7-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are SoCs that configure different FIFO depths for their instances
of the SPI IP. See the fifo_lvl_mask defined for exynos4_spi_port_config
for example:
.fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F },
The first instance of the IP is configured with 256 bytes FIFOs, whereas
the last two are configured with 64 bytes FIFOs.
Instead of mangling with the .fifo_lvl_mask and its dependency of the DT
alias ID, allow such SoCs to determine the FIFO depth via the
``fifo-depth`` DT property.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-6-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Determine the FIFO depth only once, at probe time.
``sdd->fifo_depth`` can be set later on with the FIFO depth
specified in the device tree.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-5-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is wrong because is using partial register field masks for the
SPI_STATUS.{RX, TX}_FIFO_LVL register fields.
We see s3c64xx_spi_port_config.fifo_lvl_mask with different values for
different instances of the same IP. Take s5pv210_spi_port_config for
example, it defines:
.fifo_lvl_mask = { 0x1ff, 0x7F },
fifo_lvl_mask is used to determine the FIFO depth of the instance of the
IP. In this case, the integrator uses a 256 bytes FIFO for the first SPI
instance of the IP, and a 64 bytes FIFO for the second instance. While
the first mask reflects the SPI_STATUS.{RX, TX}_FIFO_LVL register
fields, the second one is two bits short. Using partial field masks is
misleading and can hide problems of the driver's logic.
Allow platforms to specify the full FIFO mask, regardless of the FIFO
depth.
Introduce {rx, tx}_fifomask to represent the SPI_STATUS.{RX, TX}_FIFO_LVL
register fields. It's a shifted mask defining the field's length and
position. We'll be able to deprecate the use of @rx_lvl_offset, as the
shift value can be determined from the mask. The existing compatibles
shall start using {rx, tx}_fifomask so that they use the full field mask
and to avoid shifting the mask to position, and then shifting it back to
zero in the {TX, RX}_FIFO_LVL macros.
@rx_lvl_offset will be deprecated in a further patch, after we have the
infrastructure to deprecate @fifo_lvl_mask as well.
No functional change intended.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-4-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define a magic value, it will be used in the next patch as well.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-3-tudor.ambarus@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Multiple fixes, cleanups and documentations for Hyper-V core code and
drivers
* tag 'hyperv-fixes-signed-20240303' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: make hv_bus const
x86/hyperv: Allow 15-bit APIC IDs for VTL platforms
x86/hyperv: Make encrypted/decrypted changes safe for load_unaligned_zeropad()
x86/mm: Regularize set_memory_p() parameters and make non-static
x86/hyperv: Use slow_virt_to_phys() in page transition hypervisor callback
Documentation: hyperv: Add overview of PCI pass-thru device support
Drivers: hv: vmbus: Update indentation in create_gpadl_header()
Drivers: hv: vmbus: Remove duplication and cleanup code in create_gpadl_header()
fbdev/hyperv_fb: Fix logic error for Gen2 VMs in hvfb_getmem()
Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memory
hv_utils: Allow implicit ICTIMESYNCFLAG_SYNC
|
|
Make int340x_thermal use the dedicated accessor functions for the
thermal zone device object address and the thermal zone type string.
This is requisite for future thermal core improvements.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
|
|
Use ACPI IRQ override on Maibenben X565 laptop to make the internal
keyboard work.
Add a new entry to the irq1_edge_low_force_override structure, similar
to the existing ones.
Signed-off-by: Sergey Kalinichev <kalinichev.so.0@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To align with ACPI 6.3+, since bit_width can be any 8-bit value, it
cannot be depended on to be always on a clean 8b boundary. This was
uncovered on the Cobalt 100 platform.
SError Interrupt on CPU26, code 0xbe000011 -- SError
CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted 5.15.2.1-13 #1
Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION
pstate: 62400009 (nZCv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
pc : cppc_get_perf_caps+0xec/0x410
lr : cppc_get_perf_caps+0xe8/0x410
sp : ffff8000155ab730
x29: ffff8000155ab730 x28: ffff0080139d0038 x27: ffff0080139d0078
x26: 0000000000000000 x25: ffff0080139d0058 x24: 00000000ffffffff
x23: ffff0080139d0298 x22: ffff0080139d0278 x21: 0000000000000000
x20: ffff00802b251910 x19: ffff0080139d0000 x18: ffffffffffffffff
x17: 0000000000000000 x16: ffffdc7e111bad04 x15: ffff00802b251008
x14: ffffffffffffffff x13: ffff013f1fd63300 x12: 0000000000000006
x11: ffffdc7e128f4420 x10: 0000000000000000 x9 : ffffdc7e111badec
x8 : ffff00802b251980 x7 : 0000000000000000 x6 : ffff0080139d0028
x5 : 0000000000000000 x4 : ffff0080139d0018 x3 : 00000000ffffffff
x2 : 0000000000000008 x1 : ffff8000155ab7a0 x0 : 0000000000000000
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted
5.15.2.1-13 #1
Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION
Call trace:
dump_backtrace+0x0/0x1e0
show_stack+0x24/0x30
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
panic+0x16c/0x384
add_taint+0x0/0xc0
arm64_serror_panic+0x7c/0x90
arm64_is_fatal_ras_serror+0x34/0xa4
do_serror+0x50/0x6c
el1h_64_error_handler+0x40/0x74
el1h_64_error+0x7c/0x80
cppc_get_perf_caps+0xec/0x410
cppc_cpufreq_cpu_init+0x74/0x400 [cppc_cpufreq]
cpufreq_online+0x2dc/0xa30
cpufreq_add_dev+0xc0/0xd4
subsys_interface_register+0x134/0x14c
cpufreq_register_driver+0x1b0/0x354
cppc_cpufreq_init+0x1a8/0x1000 [cppc_cpufreq]
do_one_initcall+0x50/0x250
do_init_module+0x60/0x27c
load_module+0x2300/0x2570
__do_sys_finit_module+0xa8/0x114
__arm64_sys_finit_module+0x2c/0x3c
invoke_syscall+0x78/0x100
el0_svc_common.constprop.0+0x180/0x1a0
do_el0_svc+0x84/0xa0
el0_svc+0x2c/0xc0
el0t_64_sync_handler+0xa4/0x12c
el0t_64_sync+0x1a4/0x1a8
Instead, use access_width to determine the size and use the offset and
width to shift and mask the bits to read/write out. Make sure to add a
check for system memory since pcc redefines the access_width to
subspace id.
If access_width is not set, then fall back to using bit_width.
Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
[ rjw: Subject and changelog edits, comment adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
According to x86 spec ([1] and [2]), MWAIT hint_address[7:4] plus 1 is
the corresponding C-state, and 0xF means C0.
ACPI C-state table usually only contains C1+, but nothing prevents ACPI
firmware from presenting a C-state (maybe C1+) but using MWAIT address C0
(i.e., 0xF in ACPI FFH MWAIT hint address). And if this is the case, Linux
erroneously treat this cstate as C16, while actually this should be valid
C0 instead of C16, as per the specifications.
Since ACPI firmware is out of Linux kernel scope, fix the kernel handling
of 0xF ->(to) C0 in this situation. This is found when a tweaked ACPI
C-state table is presented by Qemu to VM.
Also modify the intel_idle case for code consistency.
[1]. Intel SDM Vol 2, Table 4-11. MWAIT Hints
Register (EAX): "Value of 0 means C1; 1 means C2 and so on
Value of 01111B means C0".
[2]. AMD manual Vol 3, MWAIT: "The processor C-state is EAX[7:4]+1, so to
request C0 is to place the value F in EAX[7:4] and to request C1 is to
place the value 0 in EAX[7:4].".
Signed-off-by: He Rongguang <herongguang@linux.alibaba.com>
[ rjw: Subject and changelog edits, whitespace fixups ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240304091325.717546-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
