summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-01-31PCI/ASPM: Fix deadlock when enabling ASPMJohan Hovold
A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7
2024-01-31dma-buf: heaps: Don't track CMA dma-buf pages under RssFileT.J. Mercier
DMA buffers allocated from the CMA dma-buf heap get counted under RssFile for processes that map them and trigger page faults. In addition to the incorrect accounting reported to userspace, reclaim behavior was influenced by the MM_FILEPAGES counter until linux 6.8, but this memory is not reclaimable. [1] Change the CMA dma-buf heap to set VM_PFNMAP on the VMA so MM does not poke at the memory managed by this dma-buf heap, and use vmf_insert_pfn to correct the RSS accounting. The system dma-buf heap does not suffer from this issue since remap_pfn_range is used during the mmap of the buffer, which also sets VM_PFNMAP on the VMA. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/mm/vmscan.c?id=fb46e22a9e3863e08aef8815df9f17d0f4b9aede Fixes: b61614ec318a ("dma-buf: heaps: Add CMA heap to dmabuf heaps") Signed-off-by: T.J. Mercier <tjmercier@google.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240117181141.286383-1-tjmercier@google.com
2024-01-31of: property: fix typo in io-channelsNuno Sa
The property is io-channels and not io-channel. This was effectively preventing the devlink creation. Fixes: 8e12257dead7 ("of: property: Add device link support for iommus, mboxes and io-channels") Cc: stable@vger.kernel.org Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Saravana Kannan <saravanak@google.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240123-iio-backend-v7-1-1bff236b8693@analog.com Signed-off-by: Rob Herring <robh@kernel.org>
2024-01-31qca_7k: Replace old mail addressStefan Wahren
The company I2SE has been acquired a long time ago. Switch to my private mail address before the I2SE account is deactivated. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_7k: Replace BSD boilerplate with SPDXStefan Wahren
According to MODULE_LICENSE the driver is under a dual license. So replace the BSD license text with the proper SPDX tag. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_spi: Adjust log of SPI_REG_RDBUF_BYTE_AVAStefan Wahren
All known SPI registers of the QCA700x are 16 bit long. So adjust the formater width accordingly. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_spi: Log expected signature in error caseStefan Wahren
Most of the users doesn't know the expected signature of the QCA700x. So provide it within the error message. Btw use lowercase for hex as in the rest of the driver. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_spi: Improve calculation of RX buffer sizeStefan Wahren
There are two points with the calculation of RX buffer size which are not optimal: 1. dev->mtu is a mutual parameter and it's currently initialized with QCAFRM_MAX_MTU. But for RX buffer size calculation we always need the maximum possible MTU. So better use the define directly. 2. This magic number 4 represent the hardware generated frame length which is specific to SPI. We better replace this with the suitable define. There is no functional change. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_spi: Introduce QCASPI_RX_MAX_FRAMESStefan Wahren
Currently qca_spi reserves enough space for 4 complete Ethernet over SPI frames in the receive buffer. Unfortunately this is hidden under a magic number. So replace it with a more self explaining define. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_spi: Add QCASPI prefix to ring definesStefan Wahren
All defines in qca_spi.h except of the two ring limit defines have a QCASPI prefix. Since the name is quite generic add the QCASPI prefix to avoid possible name conflicts. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_7k_common: Drop unused len from qcafrm_handleStefan Wahren
This member is never used. So drop it. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_7k_common: Drop unnecessary function descriptionStefan Wahren
qcafrm_fsm_decode has the almost the same function description in qca_7k_common.c. So drop the comment here. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_spi: Avoid skb_copy_expand in TX pathStefan Wahren
The skb spare room needs to be expanded for SPI header, footer and possible padding within the TX path. So announce the necessary space in order to avoid expensive skb_copy_expand calls. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_spi: Improve SPI IRQ handlingStefan Wahren
The functions qcaspi_netdev_open/close are responsible of request & free of the SPI interrupt, which wasn't the best choice because allocation problems are discovered not during probe. So let us split IRQ allocation & enabling, so we can take advantage of a device managed IRQ. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_spi: Improve SPI thread creationStefan Wahren
Directly storing the result of kthread_run within the private driver data makes it harder to identify if the pointer has a running thread or not. So better use a local variable for the result check and we don't have to care about error pointer in the rest of the code. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31qca_spi: Add check for kthread_stopStefan Wahren
We better not rely on that spi_thread points to a running thread. So add an check for this. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31net: lan966x: debugfs: Fix showing the port keysetHoratiu Vultur
On lan966x, it is possible to use debugfs to print different information about the VCAPs. Information like, if it is enabled, how the ports are configured, print the actual rules. The issue is that when printing how the ports are configured for IS1 lookups, it was parsing the wrong register to get this information. The fix consists in reading the correct register that contains this information. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31net: phy: c45: change genphy_c45_ethtool_[get|set]_eee to use EEE linkmode ↵Heiner Kallweit
bitmaps Change genphy_c45_ethtool_[get|set]_eee to use EEE linkmode bitmaps. This is a prerequisite for adding support for EEE modes beyond bit 31. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keeeHeiner Kallweit
This is in preparation of using the existing names for linkmode bitmaps. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31net: stmmac: Report taprio offload statusRohan G Thomas
Report taprio offload status. This includes per txq and global counters of window_drops and tx_overruns. Window_drops count include count of frames dropped because of queueMaxSDU setting and HLBF error. Transmission overrun counter inform the user application whether any packets are currently being transmitted on a particular queue during a gate-close event.DWMAC IPs takes care Transmission overrun won't happen hence this is always 0. Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31net: stmmac: est: Per Tx-queue error count for HLBFRohan G Thomas
Keep per Tx-queue error count on Head-Of-Line Blocking due to frame size(HLBF) error. The MAC raises HLBF error on one or more queues when none of the time Intervals of open-gates in the GCL is greater than or equal to the duration needed for frame transmission and by default drops those packets that causes HLBF error. EST_FRM_SZ_ERR register provides the One Hot encoded Queue numbers that have the Frame Size related error. Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31net: stmmac: Offload queueMaxSDU from tc-taprioRohan G Thomas
Add support for configuring queueMaxSDU. As DWMAC IPs doesn't support queueMaxSDU table handle this in the SW. The maximum 802.3 frame size that is allowed to be transmitted by any queue is queueMaxSDU + 16 bytes (i.e. 6 bytes SA + 6 bytes DA + 4 bytes FCS). Inspired from intel i225 driver. Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x partsLennert Buytenhek
ASMedia have confirmed that all ASM106x parts currently listed in ahci_pci_tbl[] suffer from the 43-bit DMA address limitation that we ran into on the ASM1061, and therefore, we need to apply the quirk added by commit 20730e9b2778 ("ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers") to the other supported ASM106x parts as well. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-ide/ZbopwKZJAKQRA4Xv@x1-carbon/ Signed-off-by: Lennert Buytenhek <kernel@wantstofly.org> [cassel: add link to ASMedia confirmation email] Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-01-31net: stmmac: dwmac-starfive: Add support for JH7100 SoCCristian Ciocaltea
Add a missing quirk to enable support for the StarFive JH7100 SoC. Additionally, for greater flexibility in operation, allow using the rgmii-rxid and rgmii-txid phy modes. Co-developed-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31HID: bpf: use __bpf_kfunc instead of noinlineBenjamin Tissoires
Follow the docs at Documentation/bpf/kfuncs.rst: - declare the function with `__bpf_kfunc` - disables missing prototype warnings, which allows to remove them from include/linux/hid-bpf.h Removing the prototypes is not an issue because we currently have to redeclare them when writing the BPF program. They will eventually be generated by bpftool directly AFAIU. Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-3-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31HID: bpf: actually free hdev memory after attaching a HID-BPF programBenjamin Tissoires
Turns out that I got my reference counts wrong and each successful bus_find_device() actually calls get_device(), and we need to manually call put_device(). Ensure each bus_find_device() gets a matching put_device() when releasing the bpf programs and fix all the error paths. Cc: <stable@vger.kernel.org> Fixes: f5c27da4e3c8 ("HID: initial BPF implementation") Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-2-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31HID: bpf: remove double fdget()Benjamin Tissoires
When the kfunc hid_bpf_attach_prog() is called, we called twice fdget(): one for fetching the type of the bpf program, and one for actually attaching the program to the device. The problem is that between those two calls, we have no guarantees that the prog_fd is still the same file descriptor for the given program. Solve this by calling bpf_prog_get() earlier, and use this to fetch the program type. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/bpf/CAO-hwJJ8vh8JD3-P43L-_CLNmPx0hWj44aom0O838vfP4=_1CA@mail.gmail.com/T/#t Cc: <stable@vger.kernel.org> Fixes: f5c27da4e3c8 ("HID: initial BPF implementation") Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-1-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31USB: serial: option: add Fibocom FM101-GL variantPuliang Lu
Update the USB serial option driver support for the Fibocom FM101-GL LTE modules as there are actually several different variants. - VID:PID 2cb7:01a3, FM101-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS) 0x01a3:mbim,gnss Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a3 Rev=05.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=5ccd5cd4 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Puliang Lu <puliang.lu@fibocom.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-01-31pinctrl: amd: Add IRQF_ONESHOT to the interrupt requestMario Limonciello
On some systems the interrupt is shared between GPIO controller and ACPI SCI. When the interrupt is shared with the ACPI SCI the flags need to be identical. This should fix the GPIO controller failing to work after commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI"). ``` [ 0.417335] genirq: Flags mismatch irq 9. 00000088 (pinctrl_amd) vs. 00002080 (acpi) [ 0.420073] amd_gpio: probe of AMDI0030:00 failed with error -16 ``` Cc: Rafael J. Wysocki <rafael@kernel.org> Reported-by: Christian Heusel <christian@heusel.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218407 Fixes: 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI") Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iRqUXeuKmC_+dAJtDBLWQ3x15n4gRH48y7MEaLoXF+UA@mail.gmail.com/T/#mc5506014141b61e472b24e095889535a04458083 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Tested-by: Christian Heusel <christian@heusel.eu> Link: https://lore.kernel.org/r/20240123180818.3994-1-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-01-30Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-01-29 (e1000e, ixgbe) This series contains updates to e1000e and ixgbe drivers. Jake corrects values used for maximum frequency adjustment for e1000e. Christophe Jaillet adjusts error handling path so that semaphore is released on ixgbe. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550() e1000e: correct maximum frequency adjustment values ==================== Link: https://lore.kernel.org/r/20240129185240.787397-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30mlxsw: remove I2C_CLASS_HWMON from drivers w/o detect and address_listHeiner Kallweit
Class-based I2C probing requires detect() and address_list to be set in the I2C client driver, see checks in i2c_detect(). It's misleading to declare I2C_CLASS_HWMON support if this precondition isn't met. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/77b5ab8e-20f2-4310-bd89-57db99e2f53b@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30misc: open-dice: Fix spurious lockdep warningWill Deacon
When probing the open-dice driver with PROVE_LOCKING=y, lockdep complains that the mutex in 'drvdata->lock' has a non-static key: | INFO: trying to register non-static key. | The code is fine but needs lockdep annotation, or maybe | you didn't initialize this object before use? | turning off the locking correctness validator. Fix the problem by initialising the mutex memory with mutex_init() instead of __MUTEX_INITIALIZER(). Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Brazdil <dbrazdil@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240126152410.10148-1-will@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-30misc: fastrpc: Mark all sessions as invalid in cb_removeEkansh Gupta
In remoteproc shutdown sequence, rpmsg_remove will get called which would depopulate all the child nodes that have been created during rpmsg_probe. This would result in cb_remove call for all the context banks for the remoteproc. In cb_remove function, session 0 is getting skipped which is not correct as session 0 will never become available again. Add changes to mark session 0 also as invalid. Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Link: https://lore.kernel.org/r/20240108114833.20480-1-quic_ekangupt@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-30Input: xpad - add Lenovo Legion Go controllersBrenton Simpson
The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck. It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad, volume buttons, a power button, and 2 LED ring lights. The Legion Go firmware presents these controls as a USB hub with various devices attached. In its default state, the gamepad is presented as an Xbox controller connected to this hub. (By holding a combination of buttons, it can be changed to use the older DirectInput API.) This patch teaches the existing Xbox controller module `xpad` to bind to the controller in the Legion Go, which enables support for the: - directional pad, - analog sticks (including clicks), - X, Y, A, B, - start and select (or menu and capture), - shoulder buttons, and - rumble. The trackpad, touchscreen, volume controls, and power button are already supported via existing kernel modules. Two of the face buttons, the gyroscopes, rear paddles, and LEDs are not. After this patch lands, the Legion Go will be mostly functional in Linux, out-of-the-box. The various components of the USB hub can be synthesized into a single logical controller (including the additional buttons) in userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which makes the Go fully functional. Signed-off-by: Brenton Simpson <appsforartists@google.com> Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-30efi/libstub: Add one kernel-doc commentYang Li
Add the description of @memory_type to silence the warning: drivers/firmware/efi/libstub/alignedmem.c:27: warning: Function parameter or struct member 'memory_type' not described in 'efi_allocate_pages_aligned' Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> [ardb: tweak comment] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-01-30x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDRArd Biesheuvel
The EFI stub's kernel placement logic randomizes the physical placement of the kernel by taking all available memory into account, and picking a region at random, based on a random seed. When KASLR is disabled, this seed is set to 0x0, and this results in the lowest available region of memory to be selected for loading the kernel, even if this is below LOAD_PHYSICAL_ADDR. Some of this memory is typically reserved for the GFP_DMA region, to accommodate masters that can only access the first 16 MiB of system memory. Even if such devices are rare these days, we may still end up with a warning in the kernel log, as reported by Tom: swapper/0: page allocation failure: order:10, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0 Fix this by tweaking the random allocation logic to accept a low bound on the placement, and set it to LOAD_PHYSICAL_ADDR. Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot") Reported-by: Tom Englund <tomenglund26@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218404 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-01-30soc: apple: mailbox: error pointers are negative integersLinus Torvalds
In an entirely unrelated discussion where I pointed out a stupid thinko of mine, Rasmus piped up and noted that that obvious mistake already existed elsewhere in the kernel tree. An "error pointer" is the negative error value encoded as a pointer, making the whole "return error or valid pointer" use-case simple and straightforward. We use it all over the kernel. But the key here is that errors are _negative_ error numbers, not the horrid UNIX user-level model of "-1 and the value of 'errno'". The Apple mailbox driver used the positive error values, and thus just returned invalid normal pointers instead of actual errors. Of course, the reason nobody ever noticed is that the errors presumably never actually happen, so this is fixing a conceptual bug rather than an actual one. Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/all/5c30afe0-f9fb-45d5-9333-dd914a1ea93a@prevas.dk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-01-30dm writecache: allow allocations larger than 2GiBMikulas Patocka
The function kvmalloc_node limits the allocation size to INT_MAX. This limit will be overflowed if dm-writecache attempts to map a device with 1TiB or larger length. This commit changes kvmalloc_array to vmalloc_array to avoid the limit. The commit also changes vmalloc(array_size()) to vmalloc_array(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-30dm stats: limit the number of entriesMikulas Patocka
The kvmalloc function fails with a warning if the size is larger than INT_MAX. Linus said that there should be limits that prevent this warning from being hit. This commit adds the limits to the dm-stats subsystem in DM core. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-30dm: limit the number of targets and parameter size areaMikulas Patocka
The kvmalloc function fails with a warning if the size is larger than INT_MAX. The warning was triggered by a syscall testing robot. In order to avoid the warning, this commit limits the number of targets to 1048576 and the size of the parameter area to 1073741824. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-30phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRPTony Lindgren
If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. Fixes: 657b306a7bdf ("usb: phy: add a new driver for omap usb2 phy") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-30spi: sh-msiof: avoid integer overflow in constantsWolfram Sang
cppcheck rightfully warned: drivers/spi/spi-sh-msiof.c:792:28: warning: Signed integer overflow for expression '7<<29'. [integerOverflow] sh_msiof_write(p, SIFCTR, SIFCTR_TFWM_1 | SIFCTR_RFWM_1); Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://msgid.link/r/20240130094053.10672-1-wsa+renesas@sang-engineering.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-30regulator (max5970): Fix IRQ handlerPatrick Rudolph
The max5970 datasheet gives the impression that IRQ status bits must be cleared by writing a one to set bits, as those are marked with 'R/C', however tests showed that a zero must be written. Fixes an IRQ storm as the interrupt handler actually clears the IRQ status bits. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> Link: https://msgid.link/r/20240130150257.3643657-1-naresh.solanki@9elements.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-30USB: serial: qcserial: add new usb-id for Dell Wireless DW5826eJackBB Wu
Add support for Dell DW5826e with USB-id 0x413c:0x8217 & 0x413c:0x8218. It is 0x413c:0x8217 T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8217 Rev= 5.04 S: Manufacturer=DELL S: Product=COMPAL Electronics EXM-G1A S: SerialNumber=359302940050401 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=qcserial E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms It is 0x413c:0x8218 T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8218 Rev= 0.00 S: Manufacturer=DELL S: Product=COMPAL Electronics EXM-G1A S: SerialNumber=359302940050401 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: JackBB Wu <wojackbb@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-01-30USB: serial: cp210x: add ID for IMST iM871A-USBLeonard Dallmayr
The device IMST USB-Stick for Smart Meter is a rebranded IMST iM871A-USB Wireless M-Bus USB-adapter. It is used to read wireless water, gas and electricity meters. Signed-off-by: Leonard Dallmayr <leonard.dallmayr@mailbox.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-01-30mlxsw: Use refcount_t for reference countingAmit Cohen
mlxsw driver uses 'unsigned int' for reference counters in several structures. Instead, use refcount_t type which allows us to catch overflow and underflow issues. Change the type of the counters and use the appropriate API. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30mlxsw: spectrum: Refactor LAG create and destroy codeAmit Cohen
mlxsw_sp stores an array of LAGs. When a port joins a LAG, in case that this LAG is already in use, we only have to increase the reference counter. Otherwise, we have to search for an unused LAG ID and configure it in hardware. When a port leaves a LAG, we have to destroy it only for the last user. This code can be simplified, for such requirements we usually add get() and put() functions which create and destroy the object. Add mlxsw_sp_lag_{get,put}() and use them. These functions take care of the reference counter and hardware configuration if needed. Change the reference counter to refcount_t type which catches overflow and underflow issues. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30mlxsw: spectrum: Search for free LAD ID onceAmit Cohen
Currently, the function mlxsw_sp_lag_index_get() is called twice - first as part of NETDEV_PRECHANGEUPPER event and later as part of NETDEV_CHANGEUPPER. This function will be changed in the next patch. To simplify the code, call it only once as part of NETDEV_CHANGEUPPER event and set an error message using 'extack' in case of failure. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30mlxsw: spectrum: Query max_lag onceAmit Cohen
The maximum number of LAGs is queried from core several times. It is used to allocate LAG array, and then to iterate over it. In addition, it is used for PGT initialization. To simplify the code, instead of querying it several times, store the value as part of 'mlxsw_sp' and use it. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 01:28:36 +0000