summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-06-13octeontx2-af: cn10k: Set NIX DWRR MTU for CN10KB siliconSunil Goutham
The DWRR MTU config added for SDP and RPM/LBK links on CN10K silicon is further extended on CK10KB silicon variant and made it configurable. Now there are 4 DWRR MTU config to choose while setting transmit scheduler's RR_WEIGHT. Here we are reserving one config for each of RPM, SDP and LBK. NIXX_AF_DWRR_MTUX(0) ---> RPM NIXX_AF_DWRR_MTUX(1) ---> SDP NIXX_AF_DWRR_MTUX(2) ---> LBK PF/VF drivers can choose the DWRR_MTU to be used by setting SMQX_CFG[pkt_link_type] to one of above. TLx_SCHEDULE[RR_WEIGHT] is to be as configured 'quantum / 2^DWRR_MTUX[MTU]'. DWRR_MTU of each link is exposed to PF/VF drivers via mailbox for RR_WEIGHT calculation. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-13octeontx2-af: extend RSS supported offload typesKiran Kumar K
Add support to select L3 SRC or DST only, L4 SRC or DST only for RSS calculation. AF consumer may have requirement as we can select only SRC or DST data for RSS calculation in L3, L4 layers. With this requirement there will be following combinations, IPV[4,6]_SRC_ONLY, IPV[4,6]_DST_ONLY, [TCP,UDP,SCTP]_SRC_ONLY, [TCP,UDP,SCTP]_DST_ONLY. So, instead of creating a bit for each combination, we are using upper 4 bits (31:28) in the flow_key_cfg to represent the SRC, DST selection. 31 => L3_SRC, 30 => L3_DST, 29 => L4_SRC, 28 => L4_DST. These won't be part of flow_cfg, so that we don't need to change the existing ABI. Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-13octeontx2-af: Add devlink option to adjust mcam high prio zone entriesNaveen Mamindlapalli
The NPC MCAM entries are currently divided into three priority zones in AF driver: high, mid, and low. The high priority zone and low priority zone take up 1/8th (each) of the available MCAM entries, and remaining going to the mid priority zone. The current allocation scheme may not meet certain requirements, such as when a requester needs more high priority zone entries than are reserved. This patch adds a devlink configurable option to increase the number of high priority zone entries that can be allocated by requester. The max number of entries that can be reserved for high priority usage is 100% of available MCAM entries. Usage: 1) Change high priority zone percentage to 75%: devlink -p dev param set pci/0002:01:00.0 name npc_mcam_high_zone_percent \ value 75 cmode runtime 2) Read high priority zone percentage: devlink -p dev param show pci/0002:01:00.0 name npc_mcam_high_zone_percent The devlink set configuration is only permitted when no MCAM entries are assigned, i.e., all MCAM entries are free, indicating that no PF/VF driver is loaded. So user must unload/unbind PF/VF driver/devices before modifying the high priority zone percentage. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-13mmc: Merge branch fixes into nextUlf Hansson
Merge the mmc fixes for v6.4-rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.5. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-13wifi: rtw88: add missing unwind goto for __rtw_download_firmware()Ping-Ke Shih
This flaw is detected by smatch: drivers/net/wireless/realtek/rtw88/mac.c:748 __rtw_download_firmware() warn: missing unwind goto? Though most things of dlfw_fail have been done by download_firmware_end_flow() and wlan_cpu_enable(), an exception is that download_firmware_end_flow() clear BIT_MCUFWDL_EN bit conditionally. So, make this change to clear the bit. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202306052310.OVhcUjZ3-lkp@intel.com/ Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230607012741.10353-1-pkshih@realtek.com
2023-06-13ata: Use of_property_read_reg() to parse "reg"Rob Herring
Use the recently added of_property_read_reg() helper to get the untranslated "reg" address value. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-06-13platform/chrome: cros_ec_spi: Use %*ph for printing hexdump of a small bufferAndy Shevchenko
The kernel already has a helper to print a hexdump of a small buffer via pointer extension. Use that instead of open coded variant. In long term it helps to kill pr_cont() or at least narrow down its use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230612212336.4961-1-andriy.shevchenko@linux.intel.com Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
2023-06-12clk: clk-loongson2: Zero init clk_init_dataBinbin Zhou
As clk_core_populate_parent_map() checks clk_init_data.num_parents first, and checks clk_init_data.parent_names[] before clk_init_data.parent_data[] and clk_init_data.parent_hws[]. Therefore the clk_init_data structure needs to be explicitly initialised to prevent an unexpected crash if clk_init_data.parent_names[] is a random value. CPU 0 Unable to handle kernel paging request at virtual address 0000000000000dc0, era == 9000000002986290, ra == 900000000298624c Oops[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-rc2+ #4582 pc 9000000002986290 ra 900000000298624c tp 9000000100094000 sp 9000000100097a60 a0 9000000104541e00 a1 0000000000000000 a2 0000000000000dc0 a3 0000000000000001 a4 90000001000979f0 a5 90000001800977d7 a6 0000000000000000 a7 900000000362a000 t0 90000000034f3548 t1 6f8c2a9cb5ab5f64 t2 0000000000011340 t3 90000000031cf5b0 t4 0000000000000dc0 t5 0000000000000004 t6 0000000000011300 t7 9000000104541e40 t8 000000000005a4f8 u0 9000000104541e00 s9 9000000104541e00 s0 9000000104bc4700 s1 9000000104541da8 s2 0000000000000001 s3 900000000356f9d8 s4 ffffffffffffffff s5 0000000000000000 s6 0000000000000dc0 s7 90000000030d0a88 s8 0000000000000000 ra: 900000000298624c __clk_register+0x228/0x84c ERA: 9000000002986290 __clk_register+0x26c/0x84c CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1c (LIE=2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000dc0 PRID: 0014a000 (Loongson-64bit, ) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____)) Stack : 90000000031c1810 90000000030d0a88 900000000325bac0 90000000034f3548 90000001002ab410 9000000104541e00 0000000000000dc0 9000000003150098 90000000031c1810 90000000031a0460 900000000362a000 90000001002ab410 900000000362a000 9000000104541da8 9000000104541de8 90000001002ab410 900000000362a000 9000000002986a68 90000000034f3ed8 90000000030d0aa8 9000000104541da8 900000000298d3b8 90000000031c1810 0000000000000000 90000000034f3ed8 90000000030d0aa8 0000000000000dc0 90000000030d0a88 90000001002ab410 900000000298d401 0000000000000000 6f8c2a9cb5ab5f64 90000000034f4000 90000000030d0a88 9000000003a48a58 90000001002ab410 9000000104bd81a8 900000000298d484 9000000100020260 0000000000000000 ... Call Trace: [<9000000002986290>] __clk_register+0x26c/0x84c [<9000000002986a68>] devm_clk_hw_register+0x5c/0xe0 [<900000000298d3b8>] loongson2_clk_register.constprop.0+0xdc/0x10c [<900000000298d484>] loongson2_clk_probe+0x9c/0x4ac [<9000000002a4eba4>] platform_probe+0x68/0xc8 [<9000000002a4bf80>] really_probe+0xbc/0x2f0 [<9000000002a4c23c>] __driver_probe_device+0x88/0x128 [<9000000002a4c318>] driver_probe_device+0x3c/0x11c [<9000000002a4c5dc>] __driver_attach+0x98/0x18c [<9000000002a49ca0>] bus_for_each_dev+0x80/0xe0 [<9000000002a4b0dc>] bus_add_driver+0xfc/0x1ec [<9000000002a4d4a8>] driver_register+0x68/0x134 [<90000000020f0110>] do_one_initcall+0x50/0x188 [<9000000003150f00>] kernel_init_freeable+0x224/0x294 [<90000000030240fc>] kernel_init+0x20/0x110 [<90000000020f1568>] ret_from_kernel_thread+0xc/0xa4 Fixes: acc0ccffec50 ("clk: clk-loongson2: add clock controller driver support") Cc: stable@vger.kernel.org Cc: Yinbo Zhu <zhuyinbo@loongson.cn> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Link: https://lore.kernel.org/r/20230524014924.2869051-1-zhoubinbin@loongson.cn Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-12clk: mediatek: fix of_iomap memory leakBosi Zhang
Smatch reports: drivers/clk/mediatek/clk-mtk.c:583 mtk_clk_simple_probe() warn: 'base' from of_iomap() not released on lines: 496. This problem was also found in linux-next. In mtk_clk_simple_probe(), base is not released when handling errors if clk_data is not existed, which may cause a leak. So free_base should be added here to release base. Fixes: c58cd0e40ffa ("clk: mediatek: Add mtk_clk_simple_probe() to simplify clock providers") Signed-off-by: Bosi Zhang <u201911157@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230422084331.47198-1-u201911157@hust.edu.cn Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-12clk: mediatek: reset: add infra_ao reset support for MT8188Runyang Chen
The infra_ao reset is needed for MT8188. - Add mtk_clk_rst_desc for MT8188. - Add register reset controller function for MT8188 infra_ao. - Add infra_ao_idx_map for MT8188. Signed-off-by: Runyang Chen <runyang.chen@mediatek.com> Link: https://lore.kernel.org/r/20230525075011.7032-3-runyang.chen@mediatek.com Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-12nvme: skip optional id ctrl csi if it failedKeith Busch
A frequently recieved report is the driver requests the optional Command Set Specific Identify Controller structure. Some controllers report this in their error log, which tiggers other warnings to user space monitoring the devices. These error entries are harmless and of questionable value to save in the log, but let's reduce their occurance by not resending the command if it previously failed. This will not prevent the errors on the initial module load, but will greatly reduce their occurance on any rescans and resumes from suspend. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217445 Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12clk: mediatek: Remove CLK_SET_PARENT from all MSDC core clocksAngeloGioacchino Del Regno
Various MSDC core clocks, used for multiple MSDC controller instances, share the same parent(s): in order to add parents selection in the mtk-sd driver to achieve an accurate clock rate for all modes, remove the CLK_SET_RATE_PARENT flag from all MSDC clocks for all SoCs: this will make sure that a clk_set_rate() call performed for a clock on a secondary controller will not change the rate of a common parent, which would result in an overclock or underclock of one of the controllers. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/r/20230516135205.372951-3-angelogioacchino.delregno@collabora.com Tested-by: Alexandre Mergnat <amergnat@baylibre.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-12clk: mediatek: mux: Stop forcing CLK_SET_RATE_PARENT flagAngeloGioacchino Del Regno
The clk-mux driver was forcing the CLK_SET_RATE_PARENT flag even for the GATE_CLK_SET_UPD_FLAGS() macro, as in mtk_clk_register_mux() the flag was unconditionally added. In preparation for a change on MSDC clock muxes, stop forcing this flag and, where necessary, update clock drivers to add it so that with this commit we introduce no functional changes for the currently supported SoCs. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/r/20230516135205.372951-2-angelogioacchino.delregno@collabora.com Tested-by: Alexandre Mergnat <amergnat@baylibre.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-12clk: si521xx: Switch i2c driver back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230526060955.1130253-1-u.kleine-koenig@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-12clk: mediatek: mt8365: Fix inverted topclk operationsMarkus Schneider-Pargmann
The given operations are inverted for the wrong registers which makes multiple of the mt8365 hardware units unusable. In my setup at least usb did not work. Fixed by swapping the operations with the inverted ones. Reported-by: Alexandre Mergnat <amergnat@baylibre.com> Fixes: 905b7430d3cc ("clk: mediatek: mt8365: Convert simple_gate to mtk_gate clocks") Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/r/20230511133226.913600-1-msp@baylibre.com Tested-by: Alexandre Mergnat <amergnat@baylibre.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-12clk: composite: Fix handling of high clock ratesSebastian Reichel
ULONG_MAX is used by a few drivers to figure out the highest available clock rate via clk_round_rate(clk, ULONG_MAX). Since abs() takes a signed value as input, the current logic effectively calculates with ULONG_MAX = -1, which results in the worst parent clock being chosen instead of the best one. For example on Rockchip RK3588 the eMMC driver tries to figure out the highest available clock rate. There are three parent clocks available resulting in the following rate diffs with the existing logic: GPLL: abs(18446744073709551615 - 1188000000) = 1188000001 CPLL: abs(18446744073709551615 - 1500000000) = 1500000001 XIN24M: abs(18446744073709551615 - 24000000) = 24000001 As a result the clock framework will promote a maximum supported clock rate of 24 MHz, even though 1.5GHz are possible. With the updated logic any casting between signed and unsigned is avoided and the numbers look like this instead: GPLL: 18446744073709551615 - 1188000000 = 18446744072521551615 CPLL: 18446744073709551615 - 1500000000 = 18446744072209551615 XIN24M: 18446744073709551615 - 24000000 = 18446744073685551615 As a result the parent with the highest acceptable rate is chosen instead of the parent clock with the lowest one. Cc: stable@vger.kernel.org Fixes: 49502408007b ("mmc: sdhci-of-dwcmshc: properly determine max clock on Rockchip") Tested-by: Christopher Obbard <chris.obbard@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230526171057.66876-2-sebastian.reichel@collabora.com Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-12net: phylink: use a dedicated helper to parse usgmii control wordMaxime Chevallier
Q-USGMII is a derivative of USGMII, that uses a specific formatting for the control word. The layout is close to the USXGMII control word, but doesn't support speeds over 1Gbps. Use a dedicated decoding logic for the USGMII control word, re-using USXGMII definitions but only considering 10/100/1000Mbps speeds Fixes: 5e61fe157a27 ("net: phy: Introduce QUSGMII PHY mode") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12net: phylink: report correct max speed for QUSGMIIMaxime Chevallier
Q-USGMII is the quad port version of USGMII, and supports a max speed of 1Gbps on each line. Make so that phylink_interface_max_speed() reports this information correctly. Fixes: ae0e4bb2a0e0 ("net: phylink: Adjust link settings based on rate matching") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12clk: meson: a1: Staticize rtc clkStephen Boyd
Sparse rightly complains that this symbol is supposed to be static. Cc: Jian Hu <jian.hu@amlogic.com> Cc: Dmitry Rokosov <ddrokosov@sberdevices.ru> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Fixes: 84af914404db ("clk: meson: a1: add Amlogic A1 Peripherals clock controller driver") Link: https://lore.kernel.org/r/20230612182332.371003-1-sboyd@kernel.org Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-13Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into ↵Dmitry Baryshkov
msm-next-lumag-base Merge the drm-next tree to pick up the DRM DSC helpers (merged via drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-12igb: fix nvm.ops.read() error handlingAleksandr Loktionov
Add error handling into igb_set_eeprom() function, in case nvm.ops.read() fails just quit with error code asap. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-12igc: Fix possible system crash when loading moduleVinicius Costa Gomes
Guarantee that when probe() is run again, PTM and PCI busmaster will be in the same state as it was if the driver was never loaded. Avoid an i225/i226 hardware issue that PTM requests can be made even though PCI bus mastering is not enabled. These unexpected PTM requests can crash some systems. So, "force" disable PTM and busmastering before removing the driver, so they can be re-enabled in the right order during probe(). This is more like a workaround and should be applicable for i225 and i226, in any platform. Fixes: 1b5d73fb8624 ("igc: Enable PCIe PTM") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-12igc: Clean the TX buffer and TX descriptor ringMuhammad Husaini Zulkifli
There could be a race condition during link down where interrupt being generated and igc_clean_tx_irq() been called to perform the TX completion. Properly clear the TX buffer/descriptor ring and disable the TX Queue ring in igc_free_tx_resources() to avoid that. Kernel trace: [ 108.237177] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLIFUI1.R00.4204.A00.2105270302 05/27/2021 [ 108.237178] RIP: 0010:refcount_warn_saturate+0x55/0x110 [ 108.242143] RSP: 0018:ffff9e7980003db0 EFLAGS: 00010286 [ 108.245555] Code: 84 bc 00 00 00 c3 cc cc cc cc 85 f6 74 46 80 3d 20 8c 4d 01 00 75 ee 48 c7 c7 88 f4 03 ab c6 05 10 8c 4d 01 01 e8 0b 10 96 ff <0f> 0b c3 cc cc cc cc 80 3d fc 8b 4d 01 00 75 cb 48 c7 c7 b0 f4 03 [ 108.250434] [ 108.250434] RSP: 0018:ffff9e798125f910 EFLAGS: 00010286 [ 108.254358] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 108.259325] [ 108.259325] RAX: 0000000000000000 RBX: ffff8ddb935b8000 RCX: 0000000000000027 [ 108.261868] RDX: ffff8de250a28800 RSI: ffff8de250a1c580 RDI: ffff8de250a1c580 [ 108.265538] RDX: 0000000000000027 RSI: 0000000000000002 RDI: ffff8de250a9c588 [ 108.265539] RBP: ffff8ddb935b8000 R08: ffffffffab2655a0 R09: ffff9e798125f898 [ 108.267914] RBP: ffff8ddb8a5b8d80 R08: 0000005648eba354 R09: 0000000000000000 [ 108.270196] R10: 0000000000000001 R11: 000000002d2d2d2d R12: ffff9e798125f948 [ 108.270197] R13: ffff9e798125fa1c R14: ffff8ddb8a5b8d80 R15: 7fffffffffffffff [ 108.273001] R10: 000000002d2d2d2d R11: 000000002d2d2d2d R12: ffff8ddb8a5b8ed4 [ 108.276410] FS: 00007f605851b740(0000) GS:ffff8de250a80000(0000) knlGS:0000000000000000 [ 108.280597] R13: 00000000000002ac R14: 00000000ffffff99 R15: ffff8ddb92561b80 [ 108.282966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 108.282967] CR2: 00007f053c039248 CR3: 0000000185850003 CR4: 0000000000f70ee0 [ 108.286206] FS: 0000000000000000(0000) GS:ffff8de250a00000(0000) knlGS:0000000000000000 [ 108.289701] PKRU: 55555554 [ 108.289702] Call Trace: [ 108.289704] <TASK> [ 108.293977] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 108.297562] sock_alloc_send_pskb+0x20c/0x240 [ 108.301494] CR2: 00007f053c03a168 CR3: 0000000184394002 CR4: 0000000000f70ef0 [ 108.301495] PKRU: 55555554 [ 108.306464] __ip_append_data.isra.0+0x96f/0x1040 [ 108.309441] Call Trace: [ 108.309443] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 108.314927] <IRQ> [ 108.314928] sock_wfree+0x1c7/0x1d0 [ 108.318078] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 108.320276] skb_release_head_state+0x32/0x90 [ 108.324812] ip_make_skb+0xf6/0x130 [ 108.327188] skb_release_all+0x16/0x40 [ 108.330775] ? udp_sendmsg+0x9f3/0xcb0 [ 108.332626] napi_consume_skb+0x48/0xf0 [ 108.334134] ? xfrm_lookup_route+0x23/0xb0 [ 108.344285] igc_poll+0x787/0x1620 [igc] [ 108.346659] udp_sendmsg+0x9f3/0xcb0 [ 108.360010] ? ttwu_do_activate+0x40/0x220 [ 108.365237] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 108.366744] ? try_to_wake_up+0x289/0x5e0 [ 108.376987] ? sock_sendmsg+0x81/0x90 [ 108.395698] ? __pfx_process_timeout+0x10/0x10 [ 108.395701] sock_sendmsg+0x81/0x90 [ 108.409052] __napi_poll+0x29/0x1c0 [ 108.414279] ____sys_sendmsg+0x284/0x310 [ 108.419507] net_rx_action+0x257/0x2d0 [ 108.438216] ___sys_sendmsg+0x7c/0xc0 [ 108.439723] __do_softirq+0xc1/0x2a8 [ 108.444950] ? finish_task_switch+0xb4/0x2f0 [ 108.452077] irq_exit_rcu+0xa9/0xd0 [ 108.453584] ? __schedule+0x372/0xd00 [ 108.460713] common_interrupt+0x84/0xa0 [ 108.467840] ? clockevents_program_event+0x95/0x100 [ 108.474968] </IRQ> [ 108.482096] ? do_nanosleep+0x88/0x130 [ 108.489224] <TASK> [ 108.489225] asm_common_interrupt+0x26/0x40 [ 108.496353] ? __rseq_handle_notify_resume+0xa9/0x4f0 [ 108.503478] RIP: 0010:cpu_idle_poll+0x2c/0x100 [ 108.510607] __sys_sendmsg+0x5d/0xb0 [ 108.518687] Code: 05 e1 d9 c8 00 65 8b 15 de 64 85 55 85 c0 7f 57 e8 b9 ef ff ff fb 65 48 8b 1c 25 00 cc 02 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 77 63 cd 00 85 c0 75 ed e8 ce ec ff ff [ 108.525817] do_syscall_64+0x44/0xa0 [ 108.531563] RSP: 0018:ffffffffab203e70 EFLAGS: 00000202 [ 108.538693] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 108.546775] [ 108.546777] RIP: 0033:0x7f605862b7f7 [ 108.549495] RAX: 0000000000000001 RBX: ffffffffab20c940 RCX: 000000000000003b [ 108.551955] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 108.554068] RDX: 4000000000000000 RSI: 000000002da97f6a RDI: 00000000002b8ff4 [ 108.559816] RSP: 002b:00007ffc99264058 EFLAGS: 00000246 [ 108.564178] RBP: 0000000000000000 R08: 00000000002b8ff4 R09: ffff8ddb01554c80 [ 108.571302] ORIG_RAX: 000000000000002e [ 108.571303] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f605862b7f7 [ 108.574023] R10: 000000000000015b R11: 000000000000000f R12: ffffffffab20c940 [ 108.574024] R13: 0000000000000000 R14: ffff8de26fbeef40 R15: ffffffffab20c940 [ 108.578727] RDX: 0000000000000000 RSI: 00007ffc992640a0 RDI: 0000000000000003 [ 108.578728] RBP: 00007ffc99264110 R08: 0000000000000000 R09: 175f48ad1c3a9c00 [ 108.581187] do_idle+0x62/0x230 [ 108.585890] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc992642d8 [ 108.585891] R13: 00005577814ab2ba R14: 00005577814addf0 R15: 00007f605876d000 [ 108.587920] cpu_startup_entry+0x1d/0x20 [ 108.591422] </TASK> [ 108.596127] rest_init+0xc5/0xd0 [ 108.600490] ---[ end trace 0000000000000000 ]--- Test Setup: DUT: - Change mac address on DUT Side. Ensure NIC not having same MAC Address - Running udp_tai on DUT side. Let udp_tai running throughout the test Example: ./udp_tai -i enp170s0 -P 100000 -p 90 -c 1 -t 0 -u 30004 Host: - Perform link up/down every 5 second. Result: Kernel panic will happen on DUT Side. Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-12of: unittest: Switch i2c driver back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230525204812.733642-1-u.kleine-koenig@pengutronix.de Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-12clk: mediatek: mt8365: Fix index issueAlexandre Mergnat
Before the patch [1], the clock probe was done directly in the clk-mt8365 driver. In this probe function, the array which stores the data clocks is sized using the higher defined numbers (*_NR_CLOCK) in the clock lists [2]. Currently, with the patch [1], the specific clk-mt8365 probe function is replaced by the mtk generic one [3], which size the clock data array by adding all the clock descriptor array size provided by the clk-mt8365 driver. Actually, all clock indexes come from the header file [2], that mean, if there are more clock (then more index) in the header file [2] than the number of clock declared in the clock descriptor arrays (which is the case currently), the clock data array will be undersized and then the generic probe function will overflow when it will try to write in "clk_data[CLK_INDEX]". Actually, instead of crashing at boot, the probe function returns an error in the log which looks like: "of_clk_hw_onecell_get: invalid index 135", then this clock isn't enabled. Solve this issue by adding in the driver the missing clocks declared in the header clock file [2]. [1]: Commit ffe91cb28f6a ("clk: mediatek: mt8365: Convert to mtk_clk_simple_{probe,remove}()") [2]: include/dt-bindings/clock/mediatek,mt8365-clk.h [3]: drivers/clk/mediatek/clk-mtk.c Fixes: ffe91cb28f6a ("clk: mediatek: mt8365: Convert to mtk_clk_simple_{probe,remove}()") Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20230517-fix-clk-index-v3-1-be4df46065c4@baylibre.com Tested-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-12intel_idle: clean up the (new) state_update_enter_method functionArjan van de Ven
Now that the logic for state_update_enter_method() is in its own function, the long if .. else if .. else if .. else if chain can be simplified by just returning from the function at the various places. This does not change functionality, but it makes the logic much simpler to read or modify later. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-12intel_idle: refactor state->enter manipulation into its own functionArjan van de Ven
Since the 6.4 kernel, the logic for updating a state's enter method based on "environmental conditions" (command line options, cpu sidechannel workarounds etc etc) has gotten pretty complex. This patch refactors this into a seperate small, self contained function (no behavior changes) for improved readability and to make future changes to this logic easier to do and understand. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-12platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messagesMario Limonciello
Using pm_pr_dbg() allows users to toggle `/sys/power/pm_debug_messages` as a single knob to turn on messages that amd-pmc can emit to aid in any s2idle debugging. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-12pinctrl: amd: Use pm_pr_dbg to show debugging messagesMario Limonciello
To make the GPIO tracking around suspend easier for end users to use, link it with pm_debug_messages. This will make discovering sources of spurious GPIOs around suspend easier. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-12ACPI: x86: Add pm_debug_messages for LPS0 _DSM state trackingMario Limonciello
Enabling debugging messages for the state requires turning on dynamic debugging for the file. To make it more accessible, use `pm_debug_messages` and clearer strings for what is happening. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-12powercap: RAPL: Fix a NULL vs IS_ERR() bugDan Carpenter
The devm_ioremap_resource() function returns error pointers on error, it never returns NULL. Update the check accordingly. Fixes: 9eef7f9da928 ("powercap: intel_rapl: Introduce RAPL TPMI interface driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-12powercap: RAPL: Fix CONFIG_IOSF_MBI dependencyZhang Rui
After commit 3382388d7148 ("intel_rapl: abstract RAPL common code"), accessing to IOSF_MBI interface is done in the RAPL common code. Thus it is the CONFIG_INTEL_RAPL_CORE that has dependency of CONFIG_IOSF_MBI, while CONFIG_INTEL_RAPL_MSR does not. This problem was not exposed previously because all the previous RAPL common code users, aka, the RAPL MSR and MMIO I/F drivers, have CONFIG_IOSF_MBI selected. Fix the CONFIG_IOSF_MBI dependency in RAPL code. This also fixes a build time failure when the RAPL TPMI I/F driver is introduced without selecting CONFIG_IOSF_MBI. x86_64-linux-ld: vmlinux.o: in function `set_floor_freq_atom': intel_rapl_common.c:(.text+0x2dac9b8): undefined reference to `iosf_mbi_write' x86_64-linux-ld: intel_rapl_common.c:(.text+0x2daca66): undefined reference to `iosf_mbi_read' Reference to iosf_mbi.h is also removed from the RAPL MSR I/F driver. Fixes: 3382388d7148 ("intel_rapl: abstract RAPL common code") Reported-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/all/20230601213246.3271412-1-arnd@kernel.org Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-12nvme-core: use nvme_ns_head_multipath instead of ns->head->diskIrvin Cote
Change the way we check for a multipath nshead so as to consistently use the same check to assert the same condition. Signed-off-by: Irvin Cote <irvincoteg@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12powercap: RAPL: fix invalid initialization for pl4_supported fieldSumeet Pawnikar
The current initialization of the struct x86_cpu_id via pl4_support_ids[] is partial and wrong. It is initializing "stepping" field with "X86_FEATURE_ANY" instead of "feature" field. Use X86_MATCH_INTEL_FAM6_MODEL macro instead of initializing each field of the struct x86_cpu_id for pl4_supported list of CPUs. This X86_MATCH_INTEL_FAM6_MODEL macro internally uses another macro X86_MATCH_VENDOR_FAM_MODEL_FEATURE for X86 based CPU matching with appropriate initialized values. Reported-by: Dave Hansen <dave.hansen@intel.com> Link: https://lore.kernel.org/lkml/28ead36b-2d9e-1a36-6f4e-04684e420260@intel.com Fixes: eb52bc2ae5b8 ("powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC") Fixes: b08b95cf30f5 ("powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P") Fixes: 515755906921 ("powercap: RAPL: Add Power Limit4 support for RaptorLake") Fixes: 1cc5b9a411e4 ("powercap: Add Power Limit4 support for Alder Lake SoC") Fixes: 8365a898fe53 ("powercap: Add Power Limit4 support") Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-12nvmet-fcloop: Do not wait on completion when unregister failsDaniel Wagner
The nvme_fc_unregister_localport() returns an error code in case that the locaport pointer is NULL or has already been unegisterd. localport is is either in the ONLINE state (all resources allocated) or has already been put into DELETED state. In this case we will never receive an wakeup call and thus any caller will hang, e.g. module unload. Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvme-fabrics: open code __nvmf_host_find()Chaitanya Kulkarni
There is no point in maintaining a separate funciton __nvmf_host_find() that has only one caller nvmf_host_add() especially when caller and callee both are small enough to merge. Due to this we are actually repeating the error handling code in both callee and caller for no reason that can be avoided, but instead we have to read both function to establish the correctness along with additional lockdep warning check due to involved locking. Just open code __nvmf_host_find() in nvme_host_alloc() with appropriate comment that removes repeated error checks in the callee/caller and lockdep check that is needed for the nvmf_hosts_mutex involvement, diffstats :- drivers/nvme/host/fabrics.c | 75 +++++++++++++------------------------ 1 file changed, 27 insertions(+), 48 deletions(-) Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvme-fabrics: error out to unlock the mutexChaitanya Kulkarni
Currently, in the nvmf_host_add() function, if the nvmf_host_alloc() call failed to allocate memory for the host, the code would directly return -ENOMEM without unlocking the nvmf_hosts_mutex. This could lead to potential issues with mutex synchronization. Fix that error handling mechanism by jumping to the out_unlock label when nvmf_host_alloc() fails. This ensures that the mutex is unlocked before returning the error code. The updated code enhances avoids possible deadlocks. Fixes: f0cebf82004d ("nvme-fabrics: prevent overriding of existing host") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@inria.fr> Closes: https://lore.kernel.org/r/202306020909.MTUEBeIa-lkp@intel.com/ Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Julia Lawall <julia.lawall@inria.fr> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvme: Increase block size variable size to 32-bitDaniel Gomez
Increase block size variable size to 32-bit unsigned to be able to support block devices larger than 32k (starting from 64 KiB). Physical and logical block size already support unsigned 32-bit. Signed-off-by: Daniel Gomez <da.gomez@samsung.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvme-fcloop: no need to return from void functionChaitanya Kulkarni
Remove return at the end of void function. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvmet-auth: remove unnecessary break after gotoChaitanya Kulkarni
Remove dead break after goto. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvmet-auth: remove some dead codeChristophe JAILLET
'status' is known to be 0 at the point. And nvmet_auth_challenge() return a -E<ERROR_CODE> or 0. So these lines of code should just be removed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvme-core: remove redundant check from nvme_init_ns_headIrvin Cote
nvme_find_ns_head already checks that the list of namescpaces in an already existing namespace head is not empty Signed-off-by: Irvin Cote <irvincoteg@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvme: move sysfs code to a dedicated sysfs.c fileMax Gurtovoy
The core.c file became long and hard to maintain. Create a dedicated file to centralize the sysfs functionality. This is a common practice to separate sysfs/configfs related logic from the main driver logic .c file. For example, in the nvmet module the configfs interface has its own dedicated file. This patch does not include any functional changes. Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> [merged dhchap memleak fixes, include nvme-auth.h] Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvme-fabrics: prevent overriding of existing hostMax Gurtovoy
When first connecting a target using the "default" host parameters, setting the hostid from the command line during a subsequent connection establishment would override the "default" hostid parameter. This would cause an existing connection that is already using the host definitions to lose its hostid. To address this issue, the code has been modified to allow only 1:1 mapping between hostnqn and hostid. This will maintain unambiguous host identification. Any non 1:1 mapping will be rejected during connection establishment. Tested-by: Noam Gottlieb <ngottlieb@nvidia.com> Reviewed-by: Israel Rukshin <israelr@nvidia.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvme-fabrics: check hostid using uuid_equalMax Gurtovoy
Use a dedicated function to match uuids instead of duplicating it. Tested-by: Noam Gottlieb <ngottlieb@nvidia.com> Reviewed-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvme-fabrics: unify common code in admin and io queue connectMax Gurtovoy
To simplify code maintenance, it is recommended to avoid duplicating code. Tested-by: Noam Gottlieb <ngottlieb@nvidia.com> Reviewed-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvmet: reorder fields in 'struct nvme_dhchap_queue_context'Christophe JAILLET
Group some variables based on their sizes to reduce holes. On x86_64, this shrinks the size of 'struct nvme_dhchap_queue_context' from 416 to 400 bytes. This structure is kvcalloc()'ed in nvme_auth_init_ctrl(), so it is likely that the allocation can be relatively big. Saving 16 bytes per structure may might a slight difference. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvmet: reorder fields in 'struct nvmf_ctrl_options'Christophe JAILLET
Group some variables based on their sizes to reduce holes. On x86_64, this shrinks the size of 'struct nvmf_ctrl_options' from 136 to 128 bytes. When such a structure is allocated in nvmf_create_ctrl(), because of the way memory allocation works, when 136 bytes were requested, 192 bytes were allocated. So this saves 64 bytes per allocation, 1 cache line to hold the whole structure and a few cycles when zeroing the memory in nvmf_create_ctrl(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvme: reorder fields in 'struct nvme_ctrl'Christophe JAILLET
Group some variables based on their sizes to reduce holes. On x86_64, this shrinks the size of 'struct nvme_ctrl' from 5368 to 5344 bytes when all CONFIG_* are defined. This structure is embedded into some other structures, so it helps reducing their size as well. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-06-12nvmet: reorder fields in 'struct nvmet_sq'Christophe JAILLET
Group some variables based on their sizes to reduce holes. On x86_64, this shrinks the size of 'struct nvmet_sq' from 472 to 464 bytes when CONFIG_NVME_TARGET_AUTH is defined. This structure is embedded into some other structures, so it helps reducing their sizes as well. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-20 01:45:42 +0000