| Age | Commit message (Collapse) | Author |
|---|
|
This is what most of the code already does and gives much more useful
prefixes than the device embedded in the pci_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
|
|
into drm-fixes
A bunch of bug fixes:
- Fix display flickering on some chips at high refresh rates
- suspend/resume fix
- hotplug fix
- a couple of segfault fixes for certain cases
* 'drm-fixes-4.12' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: fix null point error when rmmod amdgpu.
drm/amd/powerplay: fix a signedness bugs
drm/amdgpu: fix NULL pointer panic of emit_gds_switch
drm/radeon: Unbreak HPD handling for r600+
drm/amd/powerplay/smu7: disable mclk switching for high refresh rates
drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)
drm/radeon/ci: disable mclk switching for high refresh rates (v2)
drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
drm/amdgpu: fix fundamental suspend/resume issue
|
|
In the loadbalance arp monitoring scheme, when a slave link change is
detected, the slave->link is immediately updated and slave_state_changed
is set. Later down the function, the rtnl_lock is acquired and the
changes are committed, updating the bond link state.
However, the acquisition of the rtnl_lock can fail. The next time the
monitor runs, since slave->link is already updated, it determines that
link is unchanged. This results in the bond link state permanently out
of sync with the slave link.
This patch modifies bond_loadbalance_arp_mon() to handle link changes
identical to bond_ab_arp_{inspect/commit}(). The new link state is
maintained in slave->new_link until we're ready to commit at which point
it's copied into slave->link.
NOTE: miimon_{inspect/commit}() has a more complex state machine
requiring the use of the bond_{propose,commit}_link_state() functions
which maintains the intermediate state in slave->link_new_state. The arp
monitors don't require that.
Testing: This bug is very easy to reproduce with the following steps.
1. In a loop, toggle a slave link of a bond slave interface.
2. In a separate loop, do ifconfig up/down of an unrelated interface to
create contention for rtnl_lock.
Within a few iterations, the bond link goes out of sync with the slave
link.
Signed-off-by: Nithin Nayak Sujir <nsujir@tintri.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use wait_for_completion_timeout() instead of
wait_for_completion_interruptible_timeout() to avoid stray signals ruining
firmware update. Our timeout is only 300 msec so we are fine simply letting
it expire in case device misbehaves.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Some old touchpad FWs need to have interrupt cleared before issuing reset
command after updating firmware. We clear interrupt by attempting to read
full report from the controller, and discarding any data read.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add null check to avoid a potential null pointer dereference.
Addresses-Coverity-ID: 1408831
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
this bug happened when amdgpu load failed.
[ 75.740951] BUG: unable to handle kernel paging request at 00000000000031c0
[ 75.748167] IP: [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu]
[ 75.755774] PGD 0
[ 75.759185] Oops: 0000 [#1] SMP
[ 75.762408] Modules linked in: amdgpu(OE-) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit(E) fb_sys_fops(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) rpcsec_gss_krb5(E) nfsv4(E) nfs(E) fscache(E) eeepc_wmi(E) asus_wmi(E) sparse_keymap(E) intel_rapl(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_intel(E) snd_hda_codec(E) snd_hda_core(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) snd_hwdep(E) snd_pcm(E) snd_seq_midi(E) coretemp(E) kvm_intel(E) snd_seq_midi_event(E) snd_rawmidi(E) kvm(E) snd_seq(E) joydev(E) snd_seq_device(E) snd_timer(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) mei_me(E) ghash_clmulni_intel(E) snd(E) aesni_intel(E) mei(E) soundcore(E) aes_x86_64(E) shpchp(E) serio_raw(E) lrw(E) acpi_pad(E) gf128mul(E) glue_helper(E) ablk_helper(E) mac_hid(E)
[ 75.835574] cryptd(E) parport_pc(E) ppdev(E) lp(E) nfsd(E) parport(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) autofs4(E) hid_generic(E) usbhid(E) mxm_wmi(E) psmouse(E) e1000e(E) ptp(E) pps_core(E) ahci(E) libahci(E) wmi(E) video(E) i2c_hid(E) hid(E)
[ 75.858489] CPU: 5 PID: 1603 Comm: rmmod Tainted: G OE 4.9.0-custom #2
[ 75.866183] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 0901 08/31/2015
[ 75.875050] task: ffff88045d1bbb80 task.stack: ffffc90002de4000
[ 75.881094] RIP: 0010:[<ffffffffa064a0e0>] [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu]
[ 75.891238] RSP: 0018:ffffc90002de7d48 EFLAGS: 00010286
[ 75.896648] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001
[ 75.903933] RDX: 0000000000000000 RSI: ffff88045d1bbb80 RDI: 0000000000000286
[ 75.911183] RBP: ffffc90002de7d50 R08: 0000000000000502 R09: 0000000000000004
[ 75.918449] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880464bf0000
[ 75.925675] R13: ffffffffa0853000 R14: 0000000000000000 R15: 0000564e44f88210
[ 75.932980] FS: 00007f13d5400700(0000) GS:ffff880476540000(0000) knlGS:0000000000000000
[ 75.941238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 75.947088] CR2: 00000000000031c0 CR3: 000000045fd0b000 CR4: 00000000003406e0
[ 75.954332] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 75.961566] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 75.968834] Stack:
[ 75.970881] ffff880464bf0000 ffffc90002de7d60 ffffffffa0636592 ffffc90002de7d80
[ 75.978454] ffffffffa059015f ffff880464bf0000 ffff880464bf0000 ffffc90002de7da8
[ 75.986076] ffffffffa0595216 ffff880464bf0000 ffff880460f4d000 ffffffffa0853000
[ 75.993692] Call Trace:
[ 75.996177] [<ffffffffa0636592>] amdgpu_driver_lastclose_kms+0x12/0x20 [amdgpu]
[ 76.003700] [<ffffffffa059015f>] drm_lastclose+0x2f/0xd0 [drm]
[ 76.009777] [<ffffffffa0595216>] drm_dev_unregister+0x16/0xd0 [drm]
[ 76.016255] [<ffffffffa0595944>] drm_put_dev+0x34/0x70 [drm]
[ 76.022139] [<ffffffffa062f365>] amdgpu_pci_remove+0x15/0x20 [amdgpu]
[ 76.028800] [<ffffffff81416499>] pci_device_remove+0x39/0xc0
[ 76.034661] [<ffffffff81531caa>] __device_release_driver+0x9a/0x140
[ 76.041121] [<ffffffff81531e58>] driver_detach+0xb8/0xc0
[ 76.046575] [<ffffffff81530c95>] bus_remove_driver+0x55/0xd0
[ 76.052401] [<ffffffff815325fc>] driver_unregister+0x2c/0x50
[ 76.058244] [<ffffffff81416289>] pci_unregister_driver+0x29/0x90
[ 76.064466] [<ffffffffa0596c5e>] drm_pci_exit+0x9e/0xb0 [drm]
[ 76.070507] [<ffffffffa0796d71>] amdgpu_exit+0x1c/0x32 [amdgpu]
[ 76.076609] [<ffffffff81104810>] SyS_delete_module+0x1a0/0x200
[ 76.082627] [<ffffffff810e2b1a>] ? rcu_eqs_enter.isra.36+0x4a/0x50
[ 76.089001] [<ffffffff8100392e>] do_syscall_64+0x6e/0x180
[ 76.094583] [<ffffffff817e1d2f>] entry_SYSCALL64_slow_path+0x25/0x25
[ 76.101114] Code: 94 c0 c3 31 c0 5d c3 0f 1f 40 00 0f 1f 44 00 00 55 31 c0 48 89 e5 53 48 89 fb 48 c7 c7 1d 21 84 a0 e8 ab 77 b3 e0 e8 fc 8b d7 e0 <48> 8b bb c0 31 00 00 48 85 ff 74 09 e8 ff eb fc ff 85 c0 75 03
[ 76.121432] RIP [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu]
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") fill_info
does not return UDP_ZERO_CSUM6_RX when using COLLECT_METADATA. This is
because it uses ip_tunnel_info_af() with the device level info, which is
not valid for COLLECT_METADATA.
Fix by checking for the presence of the actual sockets.
Fixes: 9b4437a5b870 ("geneve: Unify LWT and netdev handling.")
Signed-off-by: Eric Garver <e@erig.me>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function get_free_pipe_id_locked() is called from
goldfish_pipe_open() with a lock is held, so we should
use GFP_ATOMIC instead of GFP_KERNEL.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kobject_del() only unlinks kobject, we need to use kobject_put() to
make sure kobject will go away completely.
Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We should not free info->key before we remove sysfs attribute that uses
this data as its name.
Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We should only add section attribute to the list of section attributes
if we successfully created corresponding sysfs attribute.
Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A rare randconfig build error shows up when we have CONFIG_CRYPTO=m
in combination with a built-in CCREE driver:
crypto/hmac.o: In function `hmac_update':
hmac.c:(.text.hmac_update+0x28): undefined reference to `crypto_shash_update'
crypto/hmac.o: In function `hmac_setkey':
hmac.c:(.text.hmac_setkey+0x90): undefined reference to `crypto_shash_digest'
hmac.c:(.text.hmac_setkey+0x154): undefined reference to `crypto_shash_update'
drivers/staging/ccree/ssi_cipher.o: In function `ssi_blkcipher_setkey':
ssi_cipher.c:(.text.ssi_blkcipher_setkey+0x350): undefined reference to `crypto_shash_digest'
drivers/staging/ccree/ssi_cipher.o: In function `ssi_blkcipher_exit':
ssi_cipher.c:(.text.ssi_blkcipher_exit+0xd4): undefined reference to `crypto_destroy_tfm'
drivers/staging/ccree/ssi_cipher.o: In function `ssi_blkcipher_init':
ssi_cipher.c:(.text.ssi_blkcipher_init+0x1b0): undefined reference to `crypto_alloc_shash'
drivers/staging/ccree/ssi_cipher.o: In function `ssi_ablkcipher_free':
ssi_cipher.c:(.text.ssi_ablkcipher_free+0x48): undefined reference to `crypto_unregister_alg'
drivers/staging/ccree/ssi_cipher.o: In function `ssi_ablkcipher_alloc':
ssi_cipher.c:(.text.ssi_ablkcipher_alloc+0x138): undefined reference to `crypto_register_alg'
ssi_cipher.c:(.text.ssi_ablkcipher_alloc+0x274): undefined reference to `crypto_blkcipher_type'
We actually need to depend on both CRYPTO and CRYPTO_HW here to avoid the
problem, since CRYPTO_HW is a bool symbol and by itself that does not
force CCREE to be a loadable module when the core cryto support is modular.
Fixes: 50cfbbb7e627 ("staging: ccree: add ahash support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-By: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver calls ioremap() in the probe function but doesn't call
iounmap() in the remove function correspondingly. Do so now.
Follow commit 5c9d6abed9e0 ("serial: altera_jtaguart: adding iounmap()")
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit e61c38d85b73 ("serial: imx: setup DCEDTE early and ensure DCD and
RI irqs to be off") has a flaw: While UCR3 and UFCR were modified using
read-modify-write before it switched to write register values
independent of the previous state. That's a good idea in principle (and
that's why I did it) but needs more care.
This patch reinstates read-modify-write for UFCR and for UCR3 ensures
that RXDMUXSEL and ADNIMP are set for post imx1.
Fixes: e61c38d85b73 ("serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Mika Penttilä <mika.penttila@nextfour.com>
Tested-by: Mika Penttilä <mika.penttila@nextfour.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is quite a big update because it includes a rework of the lpfc
driver to separate the NVMe part from the FC part.
The reason for doing this is because two separate trees (the nvme and
scsi trees respectively) want to update the individual components and
this separation will prevent a really nasty cross tree entanglement by
the time we reach the next merge window.
The rest of the fixes are the usual minor sort with no significant
security implications"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (25 commits)
scsi: zero per-cmd private driver data for each MQ I/O
scsi: csiostor: fix use after free in csio_hw_use_fwconfig()
scsi: ufs: Clean up some rpm/spm level SysFS nodes upon remove
scsi: lpfc: fix build issue if NVME_FC_TARGET is not defined
scsi: lpfc: Fix NULL pointer dereference during PCI error recovery
scsi: lpfc: update version to 11.2.0.14
scsi: lpfc: Add MDS Diagnostic support.
scsi: lpfc: Fix NVMEI's handling of NVMET's PRLI response attributes
scsi: lpfc: Cleanup entry_repost settings on SLI4 queues
scsi: lpfc: Fix debugfs root inode "lpfc" not getting deleted on driver unload.
scsi: lpfc: Fix NVME I+T not registering NVME as a supported FC4 type
scsi: lpfc: Added recovery logic for running out of NVMET IO context resources
scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context
scsi: lpfc: Separate NVMET data buffer pool fir ELS/CT.
scsi: lpfc: Fix NMI watchdog assertions when running nvmet IOPS tests
scsi: lpfc: Fix NVMEI driver not decrementing counter causing bad rport state.
scsi: lpfc: Fix nvmet RQ resource needs for large block writes.
scsi: lpfc: Adding additional stats counters for nvme.
scsi: lpfc: Fix system crash when port is reset.
scsi: lpfc: Fix used-RPI accounting problem.
...
|
|
Fixes following signature in the stack trace:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000374
IP: [<ffffffffa06ec8eb>] qla2x00_sp_free_dma+0xeb/0x2a0 [qla2xxx]
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Set bit (BIT_15) to send right ECHO payload information for Diagnostic
Echo Test command.
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
debug customer issues
Firmware dump allows for debugging customer issues. This patch fixes
start/end pointer calculation to capture T262 template entry for dump
tool.
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
queue
when driver is loaded with Multi Queue enabled, it was noticed that
there was one less queue pair created.
Following message would indicate this:
"No resources to create additional q pair."
The result of one less queue pair means that system can crash, if the
block mq layer thinks there is an extra hardware queue available, and
the driver will use a NULL ptr qpair in that instance.
Following stack trace is seen in one of the crash:
irq_create_affinity_masks+0x98/0x530
irq_create_affinity_masks+0x98/0x530
__pci_enable_msix+0x321/0x4e0
mutex_lock+0x12/0x40
pci_alloc_irq_vectors_affinity+0xb5/0x140
qla24xx_enable_msix+0x79/0x530 [qla2xxx]
qla2x00_request_irqs+0x61/0x2d0 [qla2xxx]
qla2x00_probe_one+0xc73/0x2390 [qla2xxx]
ida_simple_get+0x98/0x100
kernfs_next_descendant_post+0x40/0x50
local_pci_probe+0x45/0xa0
pci_device_probe+0xfc/0x140
driver_probe_device+0x2c5/0x470
__driver_attach+0xdd/0xe0
driver_probe_device+0x470/0x470
bus_for_each_dev+0x6c/0xc0
driver_attach+0x1e/0x20
bus_add_driver+0x45/0x270
driver_register+0x60/0xe0
__pci_register_driver+0x4c/0x50
qla2x00_module_init+0x1ce/0x21e [qla2xxx]
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove redundant fc_host_port_name calls to prevent early access of
scsi_host->shost_data buffer. This prevent null pointer access.
Following stack trace is seen:
BUG: unable to handle kernel NULL pointer dereference at 00000000000008
IP: qla24xx_report_id_acquisition+0x22d/0x3a0 [qla2xxx]
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ISP25XX leaving system unresponsive
Following messages are seen into system logs
qla2xxx [0000:09:00.0]-00af:9: Performing ISP error recovery - ha=ffff98315ee30000.
qla2xxx [0000:09:00.0]-504b:9: RISC paused -- HCCR=40, Dumping firmware.
qla2xxx [0000:09:00.0]-d009:9: Firmware has been previously dumped (ffffba488c001000) -- ignoring request.
qla2xxx [0000:09:00.0]-504b:9: RISC paused -- HCCR=40, Dumping firmware.
See Bugzilla for details
https://bugzilla.kernel.org/show_bug.cgi?id=195285
Fixes: d74595278f4ab ("scsi: qla2xxx: Add multiple queue pair functionality.")
Cc: <stable@vger.kernel.org> # v4.10+
Reported-by: Laurence Oberman <loberman@redhat.com>
Reported-by: Anthony Bloodoff <anthony.bloodoff@gmail.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Anthony Bloodoff <anthony.bloodoff@gmail.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This makes it possible, with appropriate filesystem support, for a
sysadmin to tell what is affected by the mismatch, and whether
it should be ignored (if it's inside a swap partition, for
instance).
We ratelimit to prevent log flooding: if there are so many
mismatches that ratelimiting is necessary, the individual messages
are relatively unlikely to be important (either the machine is
swapping like crazy or something is very wrong with the disk).
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
Previously, the uuid debug statements were printed in little-endian
format, which wasn't consistent in machines that might not be in
little-endian byte order. With this change, the output will be
consistent for all machines with different byte-ordering.
Signed-off-by: Kyungchan Koh <kkc6196@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
get_reg() can be reentered on architectures with prioritized interrupts
(m68k in this case), causing f->reg_index to be incremented after the
range check. Out of bounds memory access past the pt_regs struct results.
This will go mostly undetected unless access is beyond end of memory.
Prevent the race by disabling interrupts in get_reg().
Tested on m68k (Atari Falcon, and ARAnyM emulator).
Kudos to Geert Uytterhoeven for helping to trace this race.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Smatch complains about a signedness bug here:
vega10_hwmgr.c:4202 vega10_force_clock_level()
warn: always true condition '(i >= 0) => (0-u32max >= 0)'
Fixes: 7b52db39a4c2 ("drm/amd/powerplay: fix bug sclk/mclk
level can't be set on vega10.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[ 338.384770] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 338.384817] IP: [< (null)>] (null)
[ 338.385505] RIP: 0010:[<0000000000000000>] [< (null)>] (null)
[ 338.385950] Call Trace:
[ 338.385993] [<ffffffffa05d2313>] ? amdgpu_vm_flush+0x283/0x400 [amdgpu]
[ 338.386025] [<ffffffff811818d3>] ? printk+0x4d/0x4f
[ 338.386074] [<ffffffffa05d4906>] amdgpu_ib_schedule+0x4a6/0x4d0 [amdgpu]
[ 338.386140] [<ffffffffa0673e54>] amdgpu_job_run+0x64/0x180 [amdgpu]
[ 338.386203] [<ffffffffa0672e09>] amd_sched_main+0x2e9/0x4a0 [amdgpu]
[ 338.386232] [<ffffffff810bfce0>] ? prepare_to_wait_event+0x110/0x110
[ 338.386295] [<ffffffffa0672b20>] ? amd_sched_select_entity+0xe0/0xe0 [amdgpu]
[ 338.386327] [<ffffffff8109b423>] kthread+0xd3/0xf0
[ 338.386349] [<ffffffff8109b350>] ? kthread_park+0x60/0x60
[ 338.386376] [<ffffffff817e1ee5>] ret_from_fork+0x25/0x30
[ 338.386401] Code: Bad RIP value.
[ 338.386420] RIP [< (null)>] (null)
[ 338.386443] RSP <ffffc90001bd7d40>
[ 338.386458] CR2: 0000000000000000
[ 338.398508] ---[ end trace 4c66fcdc74b9a0a2 ]---
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We end up reading the interrupt register for HPD5, and then writing it
to HPD6 which on systems without anything using HPD5 results in
permanently disabling hotplug on one of the display outputs after the
first time we acknowledge a hotplug interrupt from the GPU.
This code is really bad. But for now, let's just fix this. I will
hopefully have a large patch series to refactor all of this soon.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lyude <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Even if the vblank period would allow it, it still seems to
be problematic on some cards.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868
Cc: stable@vger.kernel.org
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check to make sure the vblank period is long enough to support
mclk switching.
v2: drop needless initial assignment (Nils)
bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868
Cc: stable@vger.kernel.org
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Even if the vblank period would allow it, it still seems to
be problematic on some cards.
v2: fix logic inversion (Nils)
bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868
Cc: stable@vger.kernel.org
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Even if the vblank period would allow it, it still seems to
be problematic on some cards.
v2: fix logic inversion (Nils)
bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868
Cc: stable@vger.kernel.org
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since virtio does not provide it's own ndo_features_check handler,
TSO, and now checksum offload, are disabled for stacked vlans.
Re-enable the support and let the host take care of it. This
restores/improves Guest-to-Guest performance over Q-in-Q vlans.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At least some of the be2net cards do not seem to be capabled
of performing checksum offload computions on Q-in-Q packets.
In these case, the recevied checksum on the remote is invalid
and TCP syn packets are dropped.
This patch adds a call to check disbled acceleration features
on Q-in-Q tagged traffic.
CC: Sathya Perla <sathya.perla@broadcom.com>
CC: Ajit Khaparde <ajit.khaparde@broadcom.com>
CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
CC: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reinitializing the VM manager during suspend/resume is a very very bad
idea since all the VMs are still active and kicking.
This can lead to random VM faults after resume when new processes
become the same client ID assigned.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The 88m1101 has an errata when configuring autoneg. However, it was
being applied to many other Marvell PHYs as well. Limit its scope to
just the 88m1101.
Fixes: 76884679c644 ("phylib: Add support for Marvell 88e1111S and 88e1145")
Reported-by: Daniel Walker <danielwa@cisco.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Harini Katakam <harinik@xilinx.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix build errors by making this driver depend on OF_MDIO, like
several other similar drivers do.
drivers/built-in.o: In function `octeon_mdiobus_remove':
mdio-octeon.c:(.text+0x196ee0): undefined reference to `mdiobus_unregister'
mdio-octeon.c:(.text+0x196ee8): undefined reference to `mdiobus_free'
drivers/built-in.o: In function `octeon_mdiobus_probe':
mdio-octeon.c:(.text+0x196f1d): undefined reference to `devm_mdiobus_alloc_size'
mdio-octeon.c:(.text+0x196ffe): undefined reference to `of_mdiobus_register'
mdio-octeon.c:(.text+0x197010): undefined reference to `mdiobus_free'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2017-05-23
Some TC offloads fixes from Or Gerlitz.
From Erez, mlx5 IPoIB RX fix to improve GRO.
From Mohamad, Command interface fix to improve mitigation against FW
commands timeouts.
From Tariq, Driver load Tolerance against affinity settings failures.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some PHY require to wait for a bit after the reset GPIO has been
toggled. This adds support for the DT property `phy-reset-post-delay`
which gives the delay in milliseconds to wait after reset.
If the DT property is not given, no delay is observed. Post reset delay
greater than 1000ms are invalid.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If multiple tasks attempt to read the stats, it may happen that the
start_req_done completion is re-initialized while still being used by
another task, causing a list corruption.
This patch fixes the bug by adding a mutex to serialize the calls to
bnx2fc_get_host_stats().
WARNING: at lib/list_debug.c:48 list_del+0x6e/0xa0() (Not tainted)
Hardware name: PowerEdge R820
list_del corruption. prev->next should be ffff882035627d90, but was ffff884069541588
Pid: 40267, comm: perl Not tainted 2.6.32-642.3.1.el6.x86_64 #1
Call Trace:
[<ffffffff8107c691>] ? warn_slowpath_common+0x91/0xe0
[<ffffffff8107c796>] ? warn_slowpath_fmt+0x46/0x60
[<ffffffff812ad16e>] ? list_del+0x6e/0xa0
[<ffffffff81547eed>] ? wait_for_common+0x14d/0x180
[<ffffffff8106c4a0>] ? default_wake_function+0x0/0x20
[<ffffffff81547fd3>] ? wait_for_completion_timeout+0x13/0x20
[<ffffffffa05410b1>] ? bnx2fc_get_host_stats+0xa1/0x280 [bnx2fc]
[<ffffffffa04cf630>] ? fc_stat_show+0x90/0xc0 [scsi_transport_fc]
[<ffffffffa04cf8b6>] ? show_fcstat_tx_frames+0x16/0x20 [scsi_transport_fc]
[<ffffffff8137c647>] ? dev_attr_show+0x27/0x50
[<ffffffff8113b9be>] ? __get_free_pages+0xe/0x50
[<ffffffff812170e1>] ? sysfs_read_file+0x111/0x200
[<ffffffff8119a305>] ? vfs_read+0xb5/0x1a0
[<ffffffff8119b0b6>] ? fget_light_pos+0x16/0x50
[<ffffffff8119a651>] ? sys_read+0x51/0xb0
[<ffffffff810ee1fe>] ? __audit_syscall_exit+0x25e/0x290
[<ffffffff8100b0d2>] ? system_call_fastpath+0x16/0x1b
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When pci_enable_device() or pci_enable_device_mem() fail in
qla2x00_probe_one() we bail out but do a call to
pci_disable_device(). This causes the dev_WARN_ON() in
pci_disable_device() to trigger, as the device wasn't enabled
previously.
So instead of taking the 'probe_out' error path we can directly return
*iff* one of the pci_enable_device() calls fails.
Additionally rename the 'probe_out' goto label's name to the more
descriptive 'disable_device'.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring")
Cc: <stable@vger.kernel.org>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC host fixes intended for v4.12 rc3:
- sdhci-xenon: Don't free data for phy allocated by devm*
- sdhci-iproc: Suppress spurious interrupts
- cavium: Fix probing race with regulator
- cavium: Prevent crash with incomplete DT
- cavium-octeon: Use proper GPIO name for power control
- cavium-octeon: Fix interrupt enable code"
* tag 'mmc-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-iproc: suppress spurious interrupt with Multiblock read
mmc: cavium: Fix probing race with regulator
of/platform: Make of_platform_device_destroy globally visible
mmc: cavium: Prevent crash with incomplete DT
mmc: cavium-octeon: Use proper GPIO name for power control
mmc: cavium-octeon: Fix interrupt enable code
mmc: sdhci-xenon: kill xenon_clean_phy()
|
|
This reverts commit 368e5fbdfc60732643f34f538823ed4bc8829827.
devm_ioremap_resource() enforces that there are no overlapping
resources, where as devm_ioremap() does not. The sata phy driver needs
a subset of the sata IO address space, so maps some of the sata
address space. As a result, sata_mv now fails to probe, reporting it
cannot get its resources, and so we don't have any SATA disks.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The compiler doesn't always spot the guard that object is allocated on
the first pass, leading to:
drivers/gpu/drm/i915/selftests/i915_gem_context.c: warning: 'obj' may be used uninitialized in this function [-Wuninitialized]: => 370:8
v2: Make it more obvious by setting obj to NULL on the first pass and
any later pass where we need to reallocate.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 791ff39ae32a ("drm/i915: Live testing for context execution")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
c: <drm-intel-fixes@lists.freedesktop.org> # v4.12-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170523194412.1195-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit ca83d5840cb641b2efb04db0b70fa56955dd1453)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This reverts commit bc5ca47c0af4f949ba889e666b7da65569e36093.
Gabriel put this back into generic code with
commit 75f6dfe3e652e1adef8cc1b073c89f3e22103a8f
Author: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Date: Wed Dec 28 12:32:11 2016 -0200
drm: Deduplicate driver initialization message
but somehow he missed Chris' patch to add the message meanwhile.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101025
Fixes: 75f6dfe3e652 ("drm: Deduplicate driver initialization message")
Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517131557.7836-1-daniel.vetter@ffwll.ch
(cherry picked from commit 6bdba81979b2c3c8fed0be62ca31c32c3129d85f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The hi6220_reset driver can be built as a standalone module
yet it cannot be loaded because it depends on GPL exported symbols.
Lets set the module license so that the module loads, and things like
the on-board kirin drm starts working.
Signed-off-by: Jeremy Linton <lintonrjeremy@gmail.com>
Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus
Peter writes:
Some small bugs
|
|
Draining the transfers in terminate_all callback happens with IRQs disabled,
therefore induces huge latency:
irqsoff latency trace v1.1.5 on 4.11.0
--------------------------------------------------------------------
latency: 39770 us, #57/57, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0)
-----------------
| task: process-129 (uid:0 nice:0 policy:2 rt_prio:50)
-----------------
=> started at: _snd_pcm_stream_lock_irqsave
=> ended at: snd_pcm_stream_unlock_irqrestore
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| / delay
cmd pid ||||| time | caller
\ / ||||| \ | /
process-129 0d.s. 3us : _snd_pcm_stream_lock_irqsave
process-129 0d.s1 9us : snd_pcm_stream_lock <-_snd_pcm_stream_lock_irqsave
process-129 0d.s1 15us : preempt_count_add <-snd_pcm_stream_lock
process-129 0d.s2 22us : preempt_count_add <-snd_pcm_stream_lock
process-129 0d.s3 32us : snd_pcm_update_hw_ptr0 <-snd_pcm_period_elapsed
process-129 0d.s3 41us : soc_pcm_pointer <-snd_pcm_update_hw_ptr0
process-129 0d.s3 50us : dmaengine_pcm_pointer <-soc_pcm_pointer
process-129 0d.s3 58us+: snd_dmaengine_pcm_pointer_no_residue <-dmaengine_pcm_pointer
process-129 0d.s3 96us : update_audio_tstamp <-snd_pcm_update_hw_ptr0
process-129 0d.s3 103us : snd_pcm_update_state <-snd_pcm_update_hw_ptr0
process-129 0d.s3 112us : xrun <-snd_pcm_update_state
process-129 0d.s3 119us : snd_pcm_stop <-xrun
process-129 0d.s3 126us : snd_pcm_action <-snd_pcm_stop
process-129 0d.s3 134us : snd_pcm_action_single <-snd_pcm_action
process-129 0d.s3 141us : snd_pcm_pre_stop <-snd_pcm_action_single
process-129 0d.s3 150us : snd_pcm_do_stop <-snd_pcm_action_single
process-129 0d.s3 157us : soc_pcm_trigger <-snd_pcm_do_stop
process-129 0d.s3 166us : snd_dmaengine_pcm_trigger <-soc_pcm_trigger
process-129 0d.s3 175us : ep93xx_dma_terminate_all <-snd_dmaengine_pcm_trigger
process-129 0d.s3 182us : preempt_count_add <-ep93xx_dma_terminate_all
process-129 0d.s4 189us*: m2p_hw_shutdown <-ep93xx_dma_terminate_all
process-129 0d.s4 39472us : m2p_hw_setup <-ep93xx_dma_terminate_all
... rest skipped...
process-129 0d.s. 40080us : <stack trace>
=> ep93xx_dma_tasklet
=> tasklet_action
=> __do_softirq
=> irq_exit
=> __handle_domain_irq
=> vic_handle_irq
=> __irq_usr
=> 0xb66c6668
Just abort the transfers and warn if the HW state is not what we expect.
Move draining into device_synchronize callback.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
The current buffer is being reset to zero on device_free_chan_resources()
but not on device_terminate_all(). It could happen that HW is restarted and
expects BASE0 to be used, but the driver is not synchronized and will start
from BASE1. One solution is to reset the buffer explicitly in
m2p_hw_setup().
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
