summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-09-29clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220928145609.375860-4-dmitry.baryshkov@linaro.org
2022-09-29clk: qcom: gcc-msm8939: use parent_hws where possibleDmitry Baryshkov
Use parent_hws instead of hanving parent_data with just a single .hw entry to speed up and simplify parent lookups. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220928145609.375860-3-dmitry.baryshkov@linaro.org
2022-09-29clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscsLuca Weiss
The USB controllers on sm6350 do not retain the state when the system goes into low power state and the GDSCs are turned off. This can be observed by the USB connection not coming back alive after putting the device into suspend, essentially breaking USB. Fix this by updating the .pwrsts for the USB GDSCs so they only transition to retention state in low power. Cc: Rajendra Nayak <quic_rjendra@quicinc.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220928132853.179425-1-luca.weiss@fairphone.com
2022-09-29clk: qcom: gcc-sc8280xp: use retention for USB power domainsJohan Hovold
Since commit d399723950c4 ("clk: qcom: gdsc: Fix the handling of PWRSTS_RET support) retention mode can be used on sc8280xp to maintain state during suspend instead of leaving the domain always on. This is needed to eventually allow the parent CX domain to be powered down during suspend. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220929161124.18138-1-johan+linaro@kernel.org
2022-09-29clk: qcom: gdsc: add missing error handlingJohan Hovold
Since commit 7eb231c337e0 ("PM / Domains: Convert pm_genpd_init() to return an error code") pm_genpd_init() can return an error which the caller must handle. The current error handling was also incomplete as the runtime PM and regulator use counts were not balanced in all error paths. Add the missing error handling to the GDSC initialisation to avoid continuing as if nothing happened on errors. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220929155816.17425-1-johan+linaro@kernel.org
2022-09-29dmaengine: ti: k3-psil: add additional TX threads for j721eMatt Ranostay
Add matching PSI-L threads mapping for transmission DMA channels on the J721E platform. Signed-off-by: Matt Ranostay <mranostay@ti.com> Link: https://lore.kernel.org/r/20220919205931.8397-2-mranostay@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ti: k3-psil: add additional TX threads for j7200Matt Ranostay
Add matching PSI-L threads mapping for transmission DMA channels on the J7200 platform. Signed-off-by: Matt Ranostay <mranostay@ti.com> Link: https://lore.kernel.org/r/20220919205931.8397-3-mranostay@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: apple-admac: Trigger shared resetMartin Povišer
If a reset domain is attached to the device, obtain a shared reference to it and trigger it. Typically on a chip the ADMAC controller will share a reset domain with the MCA peripheral. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220918095845.68860-5-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: apple-admac: Do not use devres for IRQsMartin Povišer
This is in advance of adding support for triggering the reset signal to the peripheral, since registering the IRQ handler will have to be sequenced with it. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220918095845.68860-4-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ti: edma: Remove some unused functionsJiapeng Chong
These functions are defined in the edma.c file, but not called elsewhere, so delete these unused functions. drivers/dma/ti/edma.c:746:31: warning: unused function 'to_edma_cc'. drivers/dma/ti/edma.c:420:20: warning: unused function 'edma_param_or'. drivers/dma/ti/edma.c:414:20: warning: unused function 'edma_param_and'. drivers/dma/ti/edma.c:402:20: warning: unused function 'edma_param_write'. drivers/dma/ti/edma.c:373:28: warning: unused function 'edma_shadow0_read'. drivers/dma/ti/edma.c:396:28: warning: unused function 'edma_param_read'. drivers/dma/ti/edma.c:355:20: warning: unused function 'edma_or_array'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2152 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220914101943.83929-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: sh: rcar-dmac: Replace zero-length arrays with ↵Gustavo A. R. Silva
DECLARE_FLEX_ARRAY() helper Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/217 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/YzIdsJqsR3LH2qEK@work Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29Merge tag 'net-6.0-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from wifi and can. Current release - regressions: - phy: don't WARN for PHY_UP state in mdio_bus_phy_resume() - wifi: fix locking in mac80211 mlme - eth: - revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()" - mlxbf_gige: fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe Previous releases - regressions: - wifi: fix regression with non-QoS drivers Previous releases - always broken: - mptcp: fix unreleased socket in accept queue - wifi: - don't start TX with fq->lock to fix deadlock - fix memory corruption in minstrel_ht_update_rates() - eth: - macb: fix ZynqMP SGMII non-wakeup source resume failure - mt7531: only do PLL once after the reset - usbnet: fix memory leak in usbnet_disconnect() Misc: - usb: qmi_wwan: add new usb-id for Dell branded EM7455" * tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits) mptcp: fix unreleased socket in accept queue mptcp: factor out __mptcp_close() without socket lock net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2} net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge can: c_can: don't cache TX messages for C_CAN cores ice: xsk: drop power of 2 ring size restriction for AF_XDP ice: xsk: change batched Tx descriptor cleaning net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455 selftests: Fix the if conditions of in test_extra_filter() net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume() net: stmmac: power up/down serdes in stmmac_open/release wifi: mac80211: mlme: Fix double unlock on assoc success handling wifi: mac80211: mlme: Fix missing unlock on beacon RX wifi: mac80211: fix memory corruption in minstrel_ht_update_rates() wifi: mac80211: fix regression with non-QoS drivers wifi: mac80211: ensure vif queues are operational after start wifi: mac80211: don't start TX with fq->lock to fix deadlock wifi: cfg80211: fix MCS divisor value net: hippi: Add missing pci_disable_device() in rr_init_one() net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe ...
2022-09-29phy: phy-mtk-dp: make array driving_params static constColin Ian King
Don't populate the read-only array driving_params on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220929130147.97375-1-colin.i.king@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29Merge tag 'input-for-v6.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - small fixes for iqs62x-keys and melfas_mip4 drivers - corrected register address in snvs_pwrkey driver - Synaptic driver will stop trying to use intertouch (native) mode on some Lenovo AMD devices * tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address Input: synaptics - disable Intertouch for Lenovo T14 and P14s AMD G1 Input: iqs62x-keys - drop unused device node references Input: melfas_mip4 - fix return value check in mip4_probe()
2022-09-29spi: spi-gxp: Use devm_platform_ioremap_resource()Yang Yingliang
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220928145256.1879256-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-29regulator: gpio: Add input_supply support in gpio_regulator_configJerome Neanne
This is simillar as fixed-regulator. Used to extract regulator parent from the device tree. Without that property used, the parent regulator can be shut down (if not an always on). Thus leading to inappropriate behavior: On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion. Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Link: https://lore.kernel.org/r/20220929132526.29427-2-jneanne@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-29drm/amd/display: Prevent OTG shutdown during PSR SULeo Li
[Why] Enabling Z10 optimizations allows DMUB to disable the OTG during PSR link-off. This theoretically saves power by putting more of the display hardware to sleep. However, we observe that with PSR SU, it causes visual artifacts, higher power usage, and potential system hang. This is partly due to an odd behavior with the VStartup interrupt used to signal DRM vblank events. If the OTG is toggled on/off during a PSR link on/off cycle, the vstartup interrupt fires twice in quick succession. This generates incorrectly timed vblank events. Additionally, it can cause cursor updates to generate visual artifacts. Note that this is not observed with PSR1 since PSR is fully disabled when there are vblank event requestors. Cursor updates are also artifact-free, likely because there are no selectively-updated (SU) frames that can generate artifacts. [How] A potential solution is to disable z10 idle optimizations only when fast updates (flips & cursor updates) are committed. A mechanism to do so would require some thoughtful design. Let's just disable idle optimizations for PSR2 for now. Fixes: 7cc191ee7621 ("drm/amd/display: Implement MPO PSR SU") Reported-by: August Wikerfors <git@augustwikerfors.se> Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/ Tested-by: August Wikerfors <git@augustwikerfors.se> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/panel: simple: Add Multi-Inno Technology MI0800FT-9Christoph Niedermaier
Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel support. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220812114832.4946-1-cniedermaier@dh-electronics.com
2022-09-29drm/amdgpu: correct the memcpy size for ip discovery firmwareLe Ma
Use fw->size instead of discovery_tmr_size for fallback path. Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Skip put_reset_domain if it doesn't existVignesh Chander
For xgmi sriov, the reset is handled by host driver and hive->reset_domain is not initialized so need to check if it exists before doing a put. Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: remove switch from amdgpu_gmc_noretry_setGraham Sider
Simplify the logic in amdgpu_gmc_noretry_set by getting rid of the switch. Also set noretry=1 as default for GFX 10.3.0 and greater since retry faults are not supported. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Fix mc_umc_status used uninitialized warningLeo Li
On ChromeOS clang build, the following warning is seen: /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:6: error: variable 'mc_umc_status' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (mca_addr == UMC_INVALID_ADDR) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:485:21: note: uninitialized use occurs here if ((REG_GET_FIELD(mc_umc_status, MCA_UMC_UMC0_MCUMC_STATUST0, Val) == 1 && ^~~~~~~~~~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu.h:1208:5: note: expanded from macro 'REG_GET_FIELD' (((value) & REG_FIELD_MASK(reg, field)) >> REG_FIELD_SHIFT(reg, field)) ^~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:2: note: remove the 'if' if its condition is always true if (mca_addr == UMC_INVALID_ADDR) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:460:24: note: initialize the variable 'mc_umc_status' to silence this warning uint64_t mc_umc_status, mc_umc_addrt0; ^ = 0 1 error generated. make[5]: *** [/mnt/host/source/src/third_party/kernel/v5.15/scripts/Makefile.build:289: drivers/gpu/drm/amd/amdgpu/umc_v6_7.o] Error 1 Fix by initializing mc_umc_status = 0. Fixes: 1014bd1cb32552 ("drm/amdgpu: support to convert dedicated umc mca address") Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Prevent OTG shutdown during PSR SULeo Li
[Why] Enabling Z10 optimizations allows DMUB to disable the OTG during PSR link-off. This theoretically saves power by putting more of the display hardware to sleep. However, we observe that with PSR SU, it causes visual artifacts, higher power usage, and potential system hang. This is partly due to an odd behavior with the VStartup interrupt used to signal DRM vblank events. If the OTG is toggled on/off during a PSR link on/off cycle, the vstartup interrupt fires twice in quick succession. This generates incorrectly timed vblank events. Additionally, it can cause cursor updates to generate visual artifacts. Note that this is not observed with PSR1 since PSR is fully disabled when there are vblank event requestors. Cursor updates are also artifact-free, likely because there are no selectively-updated (SU) frames that can generate artifacts. [How] A potential solution is to disable z10 idle optimizations only when fast updates (flips & cursor updates) are committed. A mechanism to do so would require some thoughtful design. Let's just disable idle optimizations for PSR2 for now. Fixes: 7cc191ee7621 ("drm/amd/display: Implement MPO PSR SU") Reported-by: August Wikerfors <git@augustwikerfors.se> Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/ Tested-by: August Wikerfors <git@augustwikerfors.se> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add page retirement handling for CPU RASTao Zhou
Do RAS page retirement in poison consumption handler unconditionally. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: use RAS error address convert api in mca notifierTao Zhou
Use the convert interface to simplify code. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: support to convert dedicated umc mca addressTao Zhou
Update umc error address query interface, the mca address can be read from register or input from parameter. TODO: define a common address conversion function to simplify the code. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: export umc error address convert interfaceTao Zhou
Make it global so we can convert specific mca address. v2: rename query_error_address_per_channel to convert_ras_error_address Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: fix sdma v4 init microcode errorLikun Gao
Fix init SDMA microcode error for sdma v4, which caused by mistake when rearch sdma init microcode function (coding 4.2.2 to 4.2.0). Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()Hamza Mahfooz
Address the following error: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c: In function ‘dc_stream_remove_writeback’: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:527:55: error: array subscript [0, 0] is outside array bounds of ‘struct dc_writeback_info[1]’ [-Werror=array-bounds] 527 | stream->writeback_info[j] = stream->writeback_info[i]; | ~~~~~~~~~~~~~~~~~~~~~~^~~ In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc.h:1269, from ./drivers/gpu/drm/amd/amdgpu/../display/dc/inc/core_types.h:29, from ./drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dc_common.h:29, from drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:27: ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_stream.h:241:34: note: while referencing ‘writeback_info’ 241 | struct dc_writeback_info writeback_info[MAX_DWB_PIPES]; | Currently, we aren't checking to see if j remains within writeback_info[]'s bounds. So, add a check to make sure that we aren't overflowing the buffer. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Add amdgpu suspend-resume code path under SRIOVBokun Zhang
- Under SRIOV, we need to send REQ_GPU_FINI to the hypervisor during the suspend time. Furthermore, we cannot request a mode 1 reset under SRIOV as VF. Therefore, we will skip it as it is called in suspend_noirq() function. - In the resume code path, we need to send REQ_GPU_INIT to the hypervisor and also resume PSP IP block under SRIOV. Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: fix compiler warning for amdgpu_gfx_cp_init_microcodeLikun Gao
Change the type of parameter on amdgpu_gfx_cp_init_microcode to fix compiler warning. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: fix a compiling error in old kernelsAsher Song
This patch is used to fix following compiling error that occurs in some old kernels. error: ‘for’ loop initial declarations are only allowed in C99 mode for (int i = 0; i < dc->res_pool->res_cap->num_dsc; i++) { Signed-off-by: Asher Song <Asher.Song@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add rlc_sr_cntl_list to firmware arrayHawking Zhang
To allow upload the list via psp Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Remove fence_process in count_emittedJiadong.Zhu
The function amdgpu_fence_count_emitted used in work_hander should not call amdgpu_fence_process which must be used in irq handler. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Correct the position in patch_cond_execJiadong.Zhu
The current position calulated in gfx_v9_0_ring_emit_patch_cond_exec underflows when the wptr is divisible by ring->buf_mask + 1. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Refactor LTTPR mode selectionMichael Strauss
[WHY] Previously, LTTPR mode was decided during detection which makes link training inflexible as mode can't be dynamically changed. [HOW] -Remove lttpr_mode from link struct, and move to link training settings -Defer choosing LTTPR mode until link training Other DP changes included: -Only use fixed vs/pe link training sequence for 8b/10b encoding -Restrict fixed vs aux timeout workaround to Yellow Carp family Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: 3.2.205Aric Cyr
This version brings along following fixes: - LTTPR mode can be be dynamically changed - fixes divide by zero error - features able to use same interface to update cursor info - fixes for llvm compilation issues - Fixes DIO FIFO underflow and other FIFO errors - Partially valid EDIDs handled properly - Phatom pipes are skipped when checking pending flip - Fixed audio on audio on display after unplugging Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: fix a divide by zero errorAurabindo Pillai
[Why&How] Incorrect variable was being checked for zero condition. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Only use ODM2:1 policy for high pixel rate displaysAlvin Lee
We only gain a benefit of using the ODM2:1 dynamic policy if it allow us to decrease DISPCLK to use the VMIN freq. If the display config can already achieve VMIN DISPCLK freq without ODM2:1, don't apply the policy. Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Fix various dynamic ODM transitions on DCN32Dillon Varone
[Why&How] Several transitions were fixed that will allow Dynamic ODM and MPO transitions to be supported on DCN32. 1) Due to resource limitations, in certain scenarios that require an MPO plane to be split, the features cannot be combined with the current policy. This is due to unsafe transitions being required (OPP instance per MPCC being switched on active pipe is not supported by DCN), to support the split plane with ODM active as it moves across the viewport. Dynamic ODM will now be disabled when MPO is required. 2) When exiting MPO and re-entering ODM, DC assigns an inactive pipe for the next ODM pipe, which under previous power gating policy would result in programming a gated DSC HW block. New policy dynamically gates/un-gates DSC blocks when Dynamic ODM is active to support transitions on DCN32 only. 3) Entry and exit from 3 plane MPO and Dynamic ODM requires a minimal transition so that all pipes which require their MPCC OPP instance to be changed have a full frame to be disabled before reprogramming. To solve this, the Dynamic ODM policy now utilizes minimal state transitions when entering or exiting 3 plane scenarios. 4) Various fixes to DCN32 pipe merge/split algorithm to support Dynamic ODM and MPO transitions. In summary, this commit fixes various transitions to support ODM->MPO and MPO->ODM. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: polling vid stream status in hpo dp blankWenjing Liu
[why] vid stream control is double bufferred, if we don't wait for video stream enable set to 0, we may get temporary image corruption showing on the stream when setting PIXEL_TO_SYMBOL_FIFO_ENABLE to 0. Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Fix CAB allocation calculationAlvin Lee
[Description] Accidentally added when should have subtracted in calculation Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Update MALL SS NumWays calculationAlvin Lee
[Description] Update MALL SS NumWays calculation according to programming guide. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: skip phantom pipes when checking for pending flipAurabindo Pillai
[Why&How] Phantom pipes are not programmed fully to hardware and hence we should not expect a flip completion. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: fill in clock values when DPM is not enabledSamson Tam
[Why] For individual feature testing, PMFW may not report all clock values back. Driver will default them to 0 but this will cause the BB table to be skipped and default to one state with max clocks. [How] Add helper function to scan through initial clock values and populate them with default clock limits so that BB table can be built. Add dpm_enabled flag to check when DPM is not enabled and to trigger helper function. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Cursor Info Update refactorMax Tseng
Dc: cursor info update: phase 1: [Why] Different feature might need to update cursor info, but With different approaches. To unify this diversity problem, all features should use The same interface to update cursor. Reviewed-by: Reza Amini <reza.amini@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Avoid unnecessary pixel rate divider programmingTaimur Hassan
[Why] Programming pixel rate divider when FIFO is enabled can cause FIFO error. [How] Skip divider programming when divider values are the same to prevent FIFO error. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Remove assert for odm transition caseEric Bernstein
Remove assert that will hit during odm transition case, since this is a valid case. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Add ABM control to panel_config struct.Ian Chen
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Disable MALL when TMZ surfaceAlvin Lee
[Description] - Don't use MALL buffering of any kind when the surface is TMZ - Workaround for a HW bug Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-12 18:39:36 +0000