summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-03-14rtc: palmas: Drop IRQF_EARLY_RESUME flagGrygorii Strashko
Palams RTC IRQ is nested threaded and wired to the Palmas inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c6aa9 ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: Group Kconfig entries by vendorSoren Brinkmann
The RTC entries are mostly grouped by vendor. Move the few outliers in place. Also, change the one occurrence of 'nxp' to 'NXP' to make all NXP entries consistent. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pic32: Add PIC32 real time clock driverJoshua Henderson
This driver adds support for the PIC32 real time clock and calendar peripheral: - reading and setting time - alarms provided by dedicated IRQ Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rx8025: unsupport UIE modeAkinobu Mita
The alarm for rx8025 only has a minute accuracy, so unsupport UIE mode. pcf8563 and hym8563 also have a minute accuracy and unsupport it. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rx8025: round up to nearest minute for a minute accuracy alarmAkinobu Mita
The alarm for rx8025 only has a minute accuracy, so round up to nearest minute when setting alarm. Without doing this, rtctest blocks one day after setting alarm to 5 seconds later. pcf8563 and hym8563 also have similar handling. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rx8025: protect ctrl1 register update by rtc->ops_lockAkinobu Mita
The ctrl1 register is accessed by alarm operations. But it is updated in threaded interrupt handler without acquiring rtc->ops_lock. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rx8025: fix irq handler registrationAkinobu Mita
When IRQ line for this chips is connected, devm_request_threaded_irq() refuses to register irq handler with the following message. genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: s5m: De-inline large functions to save spaceKrzysztof Kozlowski
Few functions were marked inline even though they were relatively large and sometimes used in multiple places. De-inline them to let the compiler decide whether optimization makes sense. This fixes inline_hunt report: drivers/rtc/rtc-s5m.c: Deinline s5m8767_rtc_set_alarm_reg, save 704 bytes drivers/rtc/rtc-s5m.c: Deinline s5m8767_wait_for_udr_update, save 192 bytes Reported-by: Denys Vlasenko <vda.linux@googlemail.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: make class.c explicitly non-modularPaul Gortmaker
The Makefile/Kconfig currently controlling compilation of this code is: obj-$(CONFIG_RTC_CLASS) += rtc-core.o rtc-core-y := class.o interface.o drivers/rtc/Kconfig:menuconfig RTC_CLASS drivers/rtc/Kconfig: bool "Real Time Clock" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the code there is no doubt it is builtin-only. We don't replace module.h with init.h since the file does need to know what a struct module is. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf85063: fix time/date settingJuergen Borleis
When setting a new time/date the RTC's clock must be stopped first, in order to write the time/date registers in an atomic manner. So, this change stops the clock first and then writes the time/date registers and the clock control register (to re-enable the clock) in one turn. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf85063: fix time/date readingJuergen Borleis
Check if the RTC signals an invalid time/date (due to a battery power loss for example). In this case ignore the time/date until it is really set again. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf85063: simplify code to read the current timeJuergen Borleis
By using i2c_smbus_read_i2c_block_data() the code is now much simpler. While at it: when reading the RTC's seconds register, all time/date registers are frozen until the RTC's year register is read. So it is important to read all time/date registers in one turn to not lose a second event. Make it more clear why the read must happen in this way. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf2123: implement read_offset and set_offsetJoshua Clayton
pcf2123 has an offset register, which can be used to make minor adjustments to the clock rate to compensate for temperature or a crystal that is not exactly right. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: implement a sysfs interface for clock offsetJoshua Clayton
clock offset may be set and read in decimal parts per billion attribute is /sys/class/rtc/rtcN/offset The attribute is only visible for rtcs that have set_offset implemented. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: Add functions to set and read rtc offsetJoshua Clayton
A number of rtc devices, such as the NXP pcf2123 include a facility to adjust the clock in order to compensate for temperature or a crystal, capacitor, etc, that results in the rtc clock not running at exactly 32.768 kHz. Data sheets I have seen refer to this as a clock offset, and measure it in parts per million, however they often reference ppm to 2 digits of precision, which makes integer ppm less than ideal. We use parts per billion, which more than covers the precision needed and works nicely within 32 bits Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rv8803: convert spin_lock to mutex_lockOleksij Rempel
Fix a scheduling while atomic issue caused by rv8803_set_time() holding a spinlock during the call to i2c_smbus_read_byte_data(). Signed-off-by: Oleksij Rempel <fixed-term.Oleksij.Rempel@de.bosch.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: add Alphascale asm9260 driverOleksij Rempel
Add support for RTC controller found on Alphascale asm9260 SoC. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: ds1307: add clock provider support for DS3231Akinobu Mita
DS3231 has programmable square-wave output signal. This enables to use this feature as a clock provider of common clock framework. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: max77686: move initialisation of rtc regmap, irq chip locallyLaxman Dewangan
To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14mfd: max77686: do not set i2c client data for rtc i2c clientLaxman Dewangan
There is different RTC I2C address for RTC block in MAX77686. Driver is creating dummy i2c client for this address to access the register of this IP block. As there is no call to i2c_get_clientdata() for rtc_i2c client, there is no need to store pointer and hence removing the call to set client data for rtc i2c client. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: max77686: avoid reference of parent device info multiple placesLaxman Dewangan
Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: max77686: use rtc regmap to access RTC registersLaxman Dewangan
rtc_regmap should be used to access all RTC registers instead of parent regmap regardless of what chip or property have it. This makes the register access uniform and extendible for other chips. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: max77686: fix checkpatch errorLaxman Dewangan
Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: allow compilation of sun6i RTC for all sunxi SoCsAndre Przywara
At the moment the "sun6i" RTC drivers depends on having two specific SoC families selected. The Allwinner A64 SoC has the same RTC, so extend the Kconfig option to allow inclusion of the driver for all Allwinner SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: add driver for RX6110SA real time clockSteffen Trumtrar
The RX6110 comes in two different variants: SPI and I2C. This driver only supports the SPI variant. If the need ever arises to also support the I2C variant, this driver could easily be refactored to support both cases. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf2123: avoid resetting the clock if possibleJoshua Clayton
pcf2123 data sheet recommends a software reset when the chip is first powered on. This change avoids resetting the chip every time the driver is loaded, which has some negative effects. There are several registers including a clock rate adjustment that really should survive a reload of the driver (or reboot). In addition, stopping and restarting the clock to verify the chip is there is not a good thing once the time is set. According to the data sheet, the seconds register has a 1 in the high bit when the voltage has gotten low. We check for this condition, as well as whether the time retrieved from the chip is valid. We reset the rtc only if the time is not reliable and valid. This is sufficient for checking for the presence of the chip, as either all zeros or all 0xff will result in an invalid time/date Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf2123: refactor chip reset into a functionJoshua Clayton
Refactor chip reset items into its own function, isolating it from the rest of the device probe. Subsequent commits will avoid calling this code. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf2123: clean up writes to the rtc chipJoshua Clayton
Add new functions pcf2123_write(), and pcf2123_write_reg(). Use named defines for the values being written. This improves modularity and readability, and reduces lines of code. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf2123: clean up reads from the chipJoshua Clayton
Put read operations into a function. This improves modularity and readability. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf2123: define registers and bit macrosJoshua Clayton
Add defines for all 16 registers in the pcf2123. Add defines for useful bits from several registers I've tried to document all the registers, and as best as possible, all the special bits they employ Use BIT() wherever possible in the bit definitions Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14cpqarray: remove it from the kernelJens Axboe
We disabled the ability to enable this driver back in October of 2013, we should be able to safely remove it at this point. The initial goal was to remove it in 3.15, so now is the time. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-14iscsi_ibft: Add prefix-len attr and display netmaskHannes Reinecke
The iBFT table only specifies a prefix length, not a netmask. And the netmask is pretty much pointless for IPv6. So introduce a new attribute 'prefix-len'. Some older user-space code might rely on the netmask attribute being present, so we should always display it. Changes from v1: - Combined two patches into one Changes from v2: - Cleaned up/corrected wording for patch description v3: [Put Hannes back as author] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
2016-03-14drm/vmwgfx: Allow the UPDATE_LAYOUT ioctl from control nodesThomas Hellstrom
On vmware there is a daemon telling the KMS system about the GUI layout. Typically it talks to the X server but in the absence of an X server or if there are multiple, it wants to talk directly to the vmwgfx kernel module. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2016-03-14drm/vmwgfx: Send a hotplug event at master_setThomas Hellstrom
Make sure drm clients (mostly the X server) are communicated the current layout when switched in. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Default to explicit crtc placement for screen targets and screen ↵Thomas Hellstrom
objects Enables using multiple framebuffers. For legacy display units, explicit crtc placement is not supported due to hardware limitations. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Calculate the cursor position based on the crtc gui originThomas Hellstrom
Base the cursor position on the coordinate of the crtc origin in the gui coordinate system rather than in the framebuffer coordinate system. With explicit placement, these may differ (for example when two crtcs scan out of the same framebuffer location). Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Add connector properties to switch between explicit and implicit ↵Thomas Hellstrom
placement Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Add suggested screen x and y connector propertiesThomas Hellstrom
Introduced by qxl, add these properties as a generic way to tell a display manager about the GUI layout. Also add the hotplug_mode_update_property which advises display managers to reread the mode list on a hotplug event. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2016-03-14drm/vmwgfx: Add implicit framebuffer checks to the screen target codeThomas Hellstrom
Just like for screen objects, make sure we use only a single framebuffer for implicit placement. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Break out implicit fb codeThomas Hellstrom
Preparation for supporting explicit fbs for screen objects and screen targets. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Rework screen target page flips v2Thomas Hellstrom
Gnome-Shell / Wayland assumes that page-flips can be done on a crtc regardless of framebuffer size and the crtc position within the framebuffer. Therefore rework the screen target code to correctly handle changes in framebuffer size and content_fb_type. Also make sure that we update the screen target correctly when the content_fb_type is not SAME_AS_DISPLAY. This commit breaks out the framebuffer binding code from crtc_set so it can be used both from page_flip() and crtc_set() and reworks those functions a bit to be more robust. v2: Address review comments by Sinclair Yeh. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Fix screen object page flips for large framebuffersThomas Hellstrom
For page flips the framebuffer may be much larger than the crtc scanout area and may be attached to multiple crtcs. When flipping a crtc, make sure we dirty only that crtc's area of the framebuffer. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Fix a screen object framebuffer dirty corner caseThomas Hellstrom
If there are no cliprects for a particular crtc, an invalid command would have been generated. If that's the case, instead ditch the generated command sequence. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Add DXGenMips supportCharmaine Lee
Add support for DXGenMips command. Signed-off-by: Charmaine Lee <charmainel@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2016-03-14Merge branches 'pm-cpuidle', 'pm-sleep' and 'pm-domains'Rafael J. Wysocki
* pm-cpuidle: cpuidle: menu: help gcc generate slightly better code cpuidle: menu: avoid expensive square root computation * pm-sleep: PM / suspend: replacing printk PM/freezer: y2038, use boottime to compare tstamps PM / sleep: declare __tracedata symbols as char[] rather than char * pm-domains: PM / Domains: Fix potential NULL pointer dereference PM / Domains: Fix removal of a subdomain PM / Domains: Propagate start and restore errors during runtime resume PM / Domains: Join state name and index in debugfs output PM / Domains: Restore alignment of slaves in debugfs output PM / Domains: remove old power on/off latencies ARM: imx6: pm: declare pm domain latency on power_state struct PM / Domains: Support for multiple states
2016-03-14Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (94 commits) intel_pstate: Do not skip samples partially intel_pstate: Remove freq calculation from intel_pstate_calc_busy() intel_pstate: Move intel_pstate_calc_busy() into get_target_pstate_use_performance() intel_pstate: Optimize calculation for max/min_perf_adj intel_pstate: Remove extra conversions in pid calculation cpufreq: Move scheduler-related code to the sched directory Revert "cpufreq: postfix policy directory with the first CPU in related_cpus" cpufreq: Reduce cpufreq_update_util() overhead a bit cpufreq: Select IRQ_WORK if CPU_FREQ_GOV_COMMON is set cpufreq: Remove 'policy->governor_enabled' cpufreq: Rename __cpufreq_governor() to cpufreq_governor() cpufreq: Relocate handle_update() to kill its declaration cpufreq: governor: Drop unnecessary checks from show() and store() cpufreq: governor: Fix race in dbs_update_util_handler() cpufreq: governor: Make gov_set_update_util() static cpufreq: governor: Narrow down the dbs_data_mutex coverage cpufreq: governor: Make dbs_data_mutex static cpufreq: governor: Relocate definitions of tuners structures cpufreq: governor: Move per-CPU data to the common code cpufreq: governor: Make governor private data per-policy ...
2016-03-14Merge branch 'pm-opp'Rafael J. Wysocki
* pm-opp: PM / OPP: Rename structures for clarity PM / OPP: Fix incorrect comments PM / OPP: Initialize regulator pointer to an error value PM / OPP: Initialize u_volt_min/max to a valid value PM / OPP: Fix NULL pointer dereference crash when disabling OPPs PM / OPP: Add dev_pm_opp_set_rate() PM / OPP: Manage device clk PM / OPP: Parse clock-latency and voltage-tolerance for v1 bindings PM / OPP: Introduce dev_pm_opp_get_max_transition_latency() PM / OPP: Introduce dev_pm_opp_get_max_volt_latency() PM / OPP: Disable OPPs that aren't supported by the regulator PM / OPP: get/put regulators from OPP core
2016-03-14Merge branch 'powercap'Rafael J. Wysocki
* powercap: powercap/rapl: track lead cpu per package powercap/rapl: add package reference per domain powercap/rapl: reduce ipi calls cpumask: export cpumask_any_but
2016-03-14Merge branch 'device-properties'Rafael J. Wysocki
* device-properties: device property: fix for a case of use-after-free
2016-03-14Merge branches 'acpi-ec', 'acpi-fan', 'acpi-video' and 'acpi-misc'Rafael J. Wysocki
* acpi-ec: ACPI / EC: Deny write access unless requested by module param * acpi-fan: ACPI / fan: Make struct dev_pm_ops const * acpi-video: ACPI / video: remove unused device_decode array * acpi-misc: ACPI / util: remove redundant check if element is NULL ACPI: Add acpi_force_32bit_fadt_addr option to force 32 bit FADT addresses drivers/acpi: make pmic/intel_pmic_crc.c explicitly non-modular drivers/acpi: make apei/ghes.c more explicitly non-modular drivers/acpi: make bgrt driver explicitly non-modular
generated by cgit (git 2.34.1) at 2025-09-15 22:32:01 +0000