summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-03-10net/mlx5: Parse module mapping using mlx5_ifcGal Pressman
The assumption that the first byte in the module mapping dword is the module number shouldn't be hard-coded in the driver, but come from mlx5_ifc structs. While at it, fix the incorrect width for the 'rx_lane' and 'tx_lane' fields. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: Query the maximum MCIA register read size from firmwareGal Pressman
The MCIA register supports either 12 or 32 dwords, use the correct value by querying the capability from the MCAM register. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: CT: Create smfs dr matchers dynamicallyPaul Blakey
SMFS dr matchers are processed sequentially in hardware according to their priorities, and not skipped if empty. Currently, smfs ct fs creates four predefined dr matchers per ct table (ct/ct nat) with hardcoded priority. Compared to dmfs ct fs using autogroups, this might cause additional hops in fastpath for traffic patterns that match later priorties, even if previous priorites are empty, e.g user only using ipv6 UDP traffic will have additional 3 hops. Create the matchers dynamically, using the highest priority available, on first rule usage, and remove them on last usage. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: CT: Add software steering ct flow steering providerPaul Blakey
fs_core layer adds extra book keeping that is either unneeded for CT, or unused by the underlying software steering, such as allocating FTEs and FTE ids, saving the match key and mask, and autogroups management. On top of that, direct steering has a translation layer (fs_dr) from PRM commands to direct steering objects, for example, creating temporary dr_action objects. This has a performance impact when dealing with CT high insertion rate. To use direct steering (smfs) directly for ct, add a tc ct fs smfs implementation. Instead of dmfs autogroups, smfs ct fs uses one of 4 predefined dr matchers in CT and CT-NAT tables, for each combination of tuple ethertype (ipv4/ipv6), and tuple ip_proto (udp/tcp) that is currently used by nf flow table flow offload. At rule insertions, validate the flow rule fits one of the predfined matcher, and insert to it. To fill the dr_actions of the rule efficiently, create the fwd to post_ct tbl dr_action at fs init, the count dr_action at counter creation, and re-use the already pre-allocated modify header dr_action. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: Add smfs lib to export direct steering API to CTPaul Blakey
Add a thin layer that exports selected direct steering (dr) API which will be used by a ct fs implementation in a following patch. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: DR, Add helper to get backing dr table from a mlx5 flow tablePaul Blakey
If sw steering was used to create the table, dr steeering fs creates a backing dr table for the mlx5 flow table. Add helper to return this table so it can be used to create matchers and add rules on it directly instead of passing via eswitch_offloads/fs_core insertion. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: CT: Introduce a platform for multiple flow steering providersPaul Blakey
Currently, fs_core layer provides flow steering services to the driver including: autogroups, allocating FTEs (flow table entries) and FTE ids, and support of fte action modification. If then software steering is configured, rule insertion will go through a translation layer from firmware buffers to software steering objects (see fs_dr.c). The connection tracking table is a system table that is not directly controlled by the user and is a very high scale table. These fs_core services introduces an overhead that may be optimized by using software steering API directly. Introduce ct flow steering interface to allow multiple flow steering providers. Use the new interface to implement the current dmfs (device managed flow steering) provider which uses fs_core insertion. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: Node-aware allocation for the doorbell pgdirTariq Toukan
The function is node-aware and gets the node as an argument. Use a node-aware allocation for the doorbell pgdir structure. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: Node-aware allocation for UARTariq Toukan
Prefer the aware allocation, use the device NUMA node. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: Node-aware allocation for the EQsTariq Toukan
Prefer the aware allocation, use the device NUMA node. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: Node-aware allocation for the EQ tableTariq Toukan
Prefer the aware allocation, use the device NUMA node. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: Node-aware allocation for the IRQ tableTariq Toukan
Prefer the aware allocation, use the device NUMA node. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: Delete useless module.h includeLeon Romanovsky
There is no need in include of module.h in the following files. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx4: Delete useless moduleparam includeLeon Romanovsky
Remove inclusion of not used moduleparam.h. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-11video: fbdev: kyro: make read-only array ODValues static constColin Ian King
Don't populate the read-only array ODValues on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-11video: fbdev: offb: fix warning comparing pointer to 0Haowen Bai
Fix the following coccicheck warning: drivers/video/fbdev/offb.c:415:13-14: WARNING comparing pointer to 0 Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-10net: ipa: use IPA power device pointerAlex Elder
The ipa_power structure contains a copy of the IPA device pointer, so there's no need to pass it to ipa_interconnect_init(). We can also use that pointer for an error message in ipa_power_enable(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: ipa: embed interconnect array in the power structureAlex Elder
Rather than allocating the interconnect array dynamically, represent the interconnects with a variable-length array at the end of the ipa_power structure. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: ipa: use bulk interconnect initializationAlex Elder
The previous patch used bulk interconnect operations to initialize IPA interconnects one at a time. This rearranges things to use the bulk interfaces as intended--on all interconnects together. As a result ipa_interconnect_init_one() and ipa_interconnect_exit_one() are no longer needed. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: ipa: use bulk operations to set up interconnectsAlex Elder
Use of_icc_bulk_get() and icc_bulk_put(), icc_bulk_set_bw(), and icc_bulk_enable() and icc_bulk_disable() to initialize individual IPA interconnects. Those functions already log messages in the event of error so we don't need to. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: ipa: use interconnect bulk enable/disable operationsAlex Elder
The power interconnect array is now an array of icc_bulk_data structures, which is what the interconnect bulk enable and disable functions require. Get rid of ipa_interconnect_enable() and ipa_interconnect_disable(), and just call icc_bulk_enable() and icc_bulk_disable() instead. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: ipa: use icc_enable() and icc_disable()Alex Elder
The interconnect framework now provides the ability to enable and disable interconnects without having to change their recorded "enabled" bandwidth value. Use this mechanism, rather than setting the bandwidth values to zero and non-zero respectively to disable and enable the IPA interconnects. Disable each interconnect before setting its "enabled" average and peak bandwidth values. Thereafter, enable and disable interconnects when required rather than setting their bandwidths. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: ipa: kill struct ipa_interconnectAlex Elder
The ipa_interconnect structure contains an icc_path pointer, plus an average and peak bandwidth value. Other than the interconnect name, this matches the icc_bulk_data structure exactly. Use the icc_bulk_data structure in place of the ipa_interconnect structure, and add an initialization of its name field. Then get rid of the now unnecessary ipa_interconnect structure definition. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge tag 'drm-fixes-2022-03-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "As expected at this stage its pretty quiet, one sun4i mixer fix and one i915 display flicker fix: i915: - fix psr screen flicker sun4i: - mixer format fix" * tag 'drm-fixes-2022-03-11' of git://anongit.freedesktop.org/drm/drm: drm/sun4i: mixer: Fix P010 and P210 format numbers drm/i915/psr: Set "SF Partial Frame Enable" also on full update
2022-03-10ptp: ocp: add UPF_NO_THRE_TEST flag for serial portsJonathan Lemon
The serial port driver attempts to test for correct THRE behavior on startup. However, it does this by disabling interrupts, and then intentionally trying to trigger an interrupt in order to see if the IIR bit is set in the UART. However, in this FPGA design, the UART interrupt is generated through the MSI vector, so when interrupts are re-enabled after the test, the DMAR-IR reports an unhandled IRTE entry, since no irq handler is installed at this point - it is installed after the test. This only happens on the /second/ open of the UART, since on the first open, the x86_vector has installed and activated by the driver probe, and is correctly handled. When the serial port is closed for the first time, this vector is deactivated and removed, leading to this error. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220309223427.34745-1-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10nfp: xsk: fix a warning when allocating rx ringsYinjun Zhang
Previous commits introduced AF_XDP zero-copy support, in which we need register different mem model for xdp_rxq when AF_XDP zero-copy is enabled or not. And this should be done after xdp_rxq info is registered, which is not needed for ctrl port, otherwise there complaints warnings: "Missing register, driver bug". Fix this by not registering mem model for ctrl port, just like we don't register xdp_rxq info for ctrl port. Fixes: 6402528b7a0b ("nfp: xsk: add AF_XDP zero-copy Rx and Tx support") Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220309135533.10162-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-03-09 This series contains updates to ice driver only. Martyna implements switchdev filtering on inner EtherType field for tunnels. Marcin adds reporting of slowpath statistics for port representors. Jonathan Toppins changes a non-fatal link error message from warning to debug. Maciej removes unnecessary checks in ice_clean_tx_irq(). Amritha adds support for ADQ to match outer destination MAC for tunnels. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Add support for outer dest MAC for ADQ tunnels ice: avoid XDP checks in ice_clean_tx_irq() ice: change "can't set link" message to dbg level ice: Add slow path offload stats on port representor in switchdev ice: Add support for inner etype in switchdev ==================== Link: https://lore.kernel.org/r/20220309190315.1380414-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: dsa: lantiq_gswip: enable jumbo frames on GSWIPAleksander Jan Bajkowski
This enables non-standard MTUs on a per-port basis, with the overall frame size set based on the CPU port. When the MTU is not changed, this should have no effect. Long packets crash the switch with MTUs of greater than 2526, so the maximum is limited for now. Medium packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP over 2526), Hence an MTU value of 2400 seems safe. Signed-off-by: Thomas Nixon <tom@tomn.co.uk> Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Link: https://lore.kernel.org/r/20220308230457.1599237-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge tag 'linux-can-next-for-5.18-20220310' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2022-03-10 The first 3 patches are by Oliver Hartkopp, target the CAN ISOTP protocol and update the CAN frame sending behavior, and increases the max PDU size to 64 kByte. The next 2 patches are also by Oliver Hartkopp and update the virtual VXCAN driver so that CAN frames send into the peer name space show up as RX'ed CAN frames. Vincent Mailhol contributes a patch for the etas_es58x driver to fix a false positive dereference uninitialized variable warning. 2 patches by Ulrich Hecht add r8a779a0 SoC support to the rcar_canfd driver. The remaining 21 patches target the gs_usb driver and are by Peter Fink, Ben Evans, Eric Evenchick and me. This series cleans up the gs-usb driver, documents some bits of the USB ABI used by the widely used open source firmware candleLight, adds support for up to 3 CAN interfaces per USB device, adds CAN-FD support, adds quirks for some hardware and software workarounds and finally adds support for 2 new devices. * tag 'linux-can-next-for-5.18-20220310' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (29 commits) can: gs_usb: add VID/PID for ABE CAN Debugger devices can: gs_usb: add VID/PID for CES CANext FD devices can: gs_usb: add extended bt_const feature can: gs_usb: activate quirks for CANtact Pro unconditionally can: gs_usb: add quirk for CANtact Pro overlapping GS_USB_BREQ value can: gs_usb: add usb quirk for NXP LPC546xx controllers can: gs_usb: add CAN-FD support can: gs_usb: use union and FLEX_ARRAY for data in struct gs_host_frame can: gs_usb: support up to 3 channels per device can: gs_usb: gs_usb_probe(): introduce udev and make use of it can: gs_usb: document the PAD_PKTS_TO_MAX_PKT_SIZE feature can: gs_usb: document the USER_ID feature can: gs_usb: update GS_CAN_FEATURE_IDENTIFY documentation can: gs_usb: add HW timestamp mode bit can: gs_usb: gs_make_candev(): call SET_NETDEV_DEV() after handling all bt_const->feature can: gs_usb: rewrap usb_control_msg() and usb_fill_bulk_urb() can: gs_usb: rewrap error messages can: gs_usb: GS_CAN_FLAG_OVERFLOW: make use of BIT() can: gs_usb: sort include files alphabetically can: gs_usb: fix checkpatch warning ... ==================== Link: https://lore.kernel.org/r/20220310142903.341658-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11Merge tag 'drm-intel-next-fixes-2022-03-10' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Reduce overzealous alignment constraints for GGTT - Add missing mdev attribute "name" for GVT - Async flip fixes (Ville) - Static checker fix (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YimvoLOZ8RPKrITv@jlahtine-mobl.ger.corp.intel.com
2022-03-11Merge tag 'drm-intel-fixes-2022-03-10' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix PSR2 when selective fetch is enabled and cursor at (-1, -1) (Jouni Högander) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YinTFSFg++HvuFpZ@tursulin-mobl2
2022-03-11Merge tag 'drm-misc-fixes-2022-03-10' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * drm/sun4i: Fix P010 and P210 format numbers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YipS65Iuu7RMMlAa@linux-uq9g
2022-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge tag 'net-5.17-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, and ipsec. Current release - regressions: - Bluetooth: fix unbalanced unlock in set_device_flags() - Bluetooth: fix not processing all entries on cmd_sync_work, make connect with qualcomm and intel adapters reliable - Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0" - xdp: xdp_mem_allocator can be NULL in trace_mem_connect() - eth: ice: fix race condition and deadlock during interface enslave Current release - new code bugs: - tipc: fix incorrect order of state message data sanity check Previous releases - regressions: - esp: fix possible buffer overflow in ESP transformation - dsa: unlock the rtnl_mutex when dsa_master_setup() fails - phy: meson-gxl: fix interrupt handling in forced mode - smsc95xx: ignore -ENODEV errors when device is unplugged Previous releases - always broken: - xfrm: fix tunnel mode fragmentation behavior - esp: fix inter address family tunneling on GSO - tipc: fix null-deref due to race when enabling bearer - sctp: fix kernel-infoleak for SCTP sockets - eth: macb: fix lost RX packet wakeup race in NAPI receive - eth: intel stop disabling VFs due to PF error responses - eth: bcmgenet: don't claim WOL when its not available" * tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) xdp: xdp_mem_allocator can be NULL in trace_mem_connect(). ice: Fix race condition during interface enslave net: phy: meson-gxl: improve link-up behavior net: bcmgenet: Don't claim WOL when its not available net: arc_emac: Fix use after free in arc_mdio_probe() sctp: fix kernel-infoleak for SCTP sockets net: phy: correct spelling error of media in documentation net: phy: DP83822: clear MISR2 register to disable interrupts gianfar: ethtool: Fix refcount leak in gfar_get_ts_info selftests: pmtu.sh: Kill nettest processes launched in subshell. selftests: pmtu.sh: Kill tcpdump processes launched by subshell. NFC: port100: fix use-after-free in port100_send_complete net/mlx5e: SHAMPO, reduce TIR indication net/mlx5e: Lag, Only handle events from highest priority multipath entry net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE net/mlx5: Fix a race on command flush flow net/mlx5: Fix size field in bufferx_reg struct ax25: Fix NULL pointer dereference in ax25_kill_by_device net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr net: ethernet: lpc_eth: Handle error for clk_enable ...
2022-03-10ice: Fix race condition during interface enslaveIvan Vecera
Commit 5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating auxiliary device") changes a process of re-creation of aux device so ice_plug_aux_dev() is called from ice_service_task() context. This unfortunately opens a race window that can result in dead-lock when interface has left LAG and immediately enters LAG again. Reproducer: ``` #!/bin/sh ip link add lag0 type bond mode 1 miimon 100 ip link set lag0 for n in {1..10}; do echo Cycle: $n ip link set ens7f0 master lag0 sleep 1 ip link set ens7f0 nomaster done ``` This results in: [20976.208697] Workqueue: ice ice_service_task [ice] [20976.213422] Call Trace: [20976.215871] __schedule+0x2d1/0x830 [20976.219364] schedule+0x35/0xa0 [20976.222510] schedule_preempt_disabled+0xa/0x10 [20976.227043] __mutex_lock.isra.7+0x310/0x420 [20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core] [20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core] [20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core] [20976.261079] ib_register_device+0x40d/0x580 [ib_core] [20976.266139] irdma_ib_register_device+0x129/0x250 [irdma] [20976.281409] irdma_probe+0x2c1/0x360 [irdma] [20976.285691] auxiliary_bus_probe+0x45/0x70 [20976.289790] really_probe+0x1f2/0x480 [20976.298509] driver_probe_device+0x49/0xc0 [20976.302609] bus_for_each_drv+0x79/0xc0 [20976.306448] __device_attach+0xdc/0x160 [20976.310286] bus_probe_device+0x9d/0xb0 [20976.314128] device_add+0x43c/0x890 [20976.321287] __auxiliary_device_add+0x43/0x60 [20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice] [20976.330109] ice_service_task+0xd0c/0xed0 [ice] [20976.342591] process_one_work+0x1a7/0x360 [20976.350536] worker_thread+0x30/0x390 [20976.358128] kthread+0x10a/0x120 [20976.365547] ret_from_fork+0x1f/0x40 ... [20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084 [20976.446469] Call Trace: [20976.448921] __schedule+0x2d1/0x830 [20976.452414] schedule+0x35/0xa0 [20976.455559] schedule_preempt_disabled+0xa/0x10 [20976.460090] __mutex_lock.isra.7+0x310/0x420 [20976.464364] device_del+0x36/0x3c0 [20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice] [20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice] [20976.477288] notifier_call_chain+0x47/0x70 [20976.481386] __netdev_upper_dev_link+0x18b/0x280 [20976.489845] bond_enslave+0xe05/0x1790 [bonding] [20976.494475] do_setlink+0x336/0xf50 [20976.502517] __rtnl_newlink+0x529/0x8b0 [20976.543441] rtnl_newlink+0x43/0x60 [20976.546934] rtnetlink_rcv_msg+0x2b1/0x360 [20976.559238] netlink_rcv_skb+0x4c/0x120 [20976.563079] netlink_unicast+0x196/0x230 [20976.567005] netlink_sendmsg+0x204/0x3d0 [20976.570930] sock_sendmsg+0x4c/0x50 [20976.574423] ____sys_sendmsg+0x1eb/0x250 [20976.586807] ___sys_sendmsg+0x7c/0xc0 [20976.606353] __sys_sendmsg+0x57/0xa0 [20976.609930] do_syscall_64+0x5b/0x1a0 [20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca 1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev() is called from ice_service_task() context, aux device is created and associated device->lock is taken. 2. Command 'ip link ... set master...' calls ice's notifier under RTNL lock and that notifier calls ice_unplug_aux_dev(). That function tries to take aux device->lock but this is already taken by ice_plug_aux_dev() in step 1 3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already taken in step 2 4. Dead-lock The patch fixes this issue by following changes: - Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev() call in ice_service_task() - The bit is checked in ice_clear_rdma_cap() and only if it is not set then ice_unplug_aux_dev() is called. If it is set (in other words plugging of aux device was requested and ice_plug_aux_dev() is potentially running) then the function only clears the bit - Once ice_plug_aux_dev() call (in ice_service_task) is finished the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked whether it was already cleared by ice_clear_rdma_cap(). If so then aux device is unplugged. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Co-developed-by: Petr Oros <poros@redhat.com> Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Dave Ertman <david.m.ertman@intel.com> Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: phy: meson-gxl: improve link-up behaviorHeiner Kallweit
Sometimes the link comes up but no data flows. This patch fixes this behavior. It's not clear what's the root cause of the issue. According to the tests one other link-up issue remains. In very rare cases the link isn't even reported as up. Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()") Tested-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: bcmgenet: Don't claim WOL when its not availableJeremy Linton
Some of the bcmgenet platforms don't correctly support WOL, yet ethtool returns: "Supports Wake-on: gsf" which is false. Ideally if there isn't a wol_irq, or there is something else that keeps the device from being able to wakeup it should display: "Supports Wake-on: d" This patch checks whether the device can wakup, before using the hard-coded supported flags. This corrects the ethtool reporting, as well as the WOL configuration because ethtool verifies that the mode is supported before attempting it. Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: arc_emac: Fix use after free in arc_mdio_probe()Jianglei Nie
If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free the "bus". But bus->name is still used in the next line, which will lead to a use after free. We can fix it by putting the name in a local variable and make the bus->name point to the rodata section "name",then use the name in the error message without referring to bus to avoid the uaf. Fixes: 95b5fc03c189 ("net: arc_emac: Make use of the helper function dev_err_probe()") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Link: https://lore.kernel.org/r/20220309121824.36529-1-niejianglei2021@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge tag 'mlx5-updates-2022-03-09' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2022-03-09 1) Remove kernel log prints on FW events regarding FW pages management and replace that with debugfs entries to track FW pages management commands failures and general stats, we do that for all FW commands in general since it's the same effort to do so under the already existing debugfs entry for FW commands. 2) Add support for ConnectX-7 Software managed steering, in other words STEv2 which shares a lot in common with STE V1, the difference is in specific offsets in the devices, the logic is almost the same, thus we implement STEv1 and STEv2 in the same file. * tag 'mlx5-updates-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: DR, Add support for ConnectX-7 steering net/mlx5: DR, Refactor ste_ctx handling for STE v0/1 net/mlx5: DR, Rename action modify fields to reflect naming in HW spec net/mlx5: DR, Fix handling of different actions on the same STE in STEv1 net/mlx5: DR, Remove unneeded comments net/mlx5: DR, Add support for matching on Internet Header Length (IHL) net/mlx5: DR, Align mlx5dv_dr API vport action with FW behavior net/mlx5: Add debugfs counters for page commands failures net/mlx5: Add pages debugfs net/mlx5: Move debugfs entries to separate struct net/mlx5: Change release_all_pages cap bit location net/mlx5: Remove redundant error on reclaim pages net/mlx5: Remove redundant error on give pages net/mlx5: Remove redundant notify fail on give pages net/mlx5: Add command failures data to debugfs net/mlx5e: TC, Fix use after free in mlx5e_clone_flow_attr_for_post_act() ==================== Link: https://lore.kernel.org/r/20220309213755.610202-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge tag 'mlx5-fixes-2022-03-09' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-03-09 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: SHAMPO, reduce TIR indication net/mlx5e: Lag, Only handle events from highest priority multipath entry net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE net/mlx5: Fix a race on command flush flow net/mlx5: Fix size field in bufferx_reg struct ==================== Link: https://lore.kernel.org/r/20220309201517.589132-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10dm: return void from __send_empty_flushMike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-03-10dm: factor out dm_io_completeMike Snitzer
Optimizes dm_io_dec_pending() slightly by avoiding local variables. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-03-10Merge tag 'staging-5.17-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are three small fixes for staging drivers for 5.17-rc8 or -final, which ever comes next. They resolve some reported problems: - rtl8723bs wifi driver deadlock fix for reported problem that is a revert of a previous patch. Also a documentation fix is added so that the same problem hopefully can not come back again. - gdm724x driver use-after-free fix for a reported problem. All of these have been in linux-next for a while with no reported problems" * tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8723bs: Improve the comment explaining the locking rules staging: rtl8723bs: Fix access-point mode deadlock staging: gdm724x: fix use after free in gdm_lte_rx()
2022-03-10net: phy: DP83822: clear MISR2 register to disable interruptsClément Léger
MISR1 was cleared twice but the original author intention was probably to clear MISR1 & MISR2 to completely disable interrupts. Fix it to clear MISR2. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10gianfar: ethtool: Fix refcount leak in gfar_get_ts_infoMiaoqian Lin
The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. Fixes: 7349a74ea75c ("net: ethernet: gianfar_ethtool: get phc index through drvdata") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge tag 'soc-fixes-5.17-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here is a third set of fixes for the soc tree, well within the expected set of changes. Maintainer list changes: - Krzysztof Kozlowski and Jisheng Zhang both have new email addresses - Broadcom iProc has a new git tree Regressions: - Robert Foss sends a revert for a Mediatek DPI bridge patch that caused an inadvertent break in the DT binding - mstar timers need to be included in Kconfig Devicetree fixes for: - Aspeed ast2600 spi pinmux - Tegra eDP panels on Nyan FHD - Tegra display IOMMU - Qualcomm sm8350 UFS clocks - minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm sm8450, and Broadcom BCM2711" * tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0 MAINTAINERS: Update Jisheng's email address Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint" dt-bindings: drm/bridge: anx7625: Revert DPI support ARM: dts: aspeed: Fix AST2600 quad spi group MAINTAINERS: update Krzysztof Kozlowski's email MAINTAINERS: Update git tree for Broadcom iProc SoCs ARM: tegra: Move Nyan FHD panels to AUX bus arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias ARM: mstar: Select HAVE_ARM_ARCH_TIMER soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint ARM: boot: dts: bcm2711: Fix HVS register range arm64: dts: qcom: c630: disable crypto due to serror arm64: dts: qcom: sm8450: fix apps_smmu interrupts arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb arm64: dts: qcom: sm8350: Correct UFS symbol clocks arm64: tegra: Disable ISO SMMU for Tegra194 Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
2022-03-10arch_topology: obtain cpu capacity using information from CPPCIonela Voinescu
Define topology_init_cpu_capacity_cppc() to use highest performance values from _CPC objects to obtain and set maximum capacity information for each CPU. acpi_cppc_processor_probe() is a good point at which to trigger the initialization of CPU (u-arch) capacity values, as at this point the highest performance values can be obtained from each CPU's _CPC objects. Architectures can therefore use this functionality through arch_init_invariance_cppc(). The performance scale used by CPPC is a unified scale for all CPUs in the system. Therefore, by obtaining the raw highest performance values from the _CPC objects, and normalizing them on the [0, 1024] capacity scale, used by the task scheduler, we obtain the CPU capacity of each CPU. While an ACPI Notify(0x85) could alert about a change in the highest performance value, which should in turn retrigger the CPU capacity computations, this notification is not currently handled by the ACPI processor driver. When supported, a call to arch_init_invariance_cppc() would perform the update. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-10x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc()Ionela Voinescu
init_freq_invariance_cppc() was called in acpi_cppc_processor_probe(), after CPU performance information and controls were populated from the per-cpu _CPC objects. But these _CPC objects provide information that helps with both CPU (u-arch) and frequency invariance. Therefore, change the function name to a more generic one, while adding the arch_ prefix, as this function is expected to be defined differently by different architectures. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-10ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset deviceIlkka Koskinen
ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to issue diagnostic dump and reset via an SDEI event or an interrupt. This patch implements SDEI path. [0] https://developer.arm.com/documentation/den0093/latest/ Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-10ACPI: tables: Add AGDI to the list of known table signaturesIlkka Koskinen
Add AGDI to the list of known ACPI table signatures to allow the kernel to recognize it when upgrading tables via initrd. Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-10-01 14:47:14 +0000