| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A handful of fixes to address a string of mistakes in the mechanism
for device-mapper to determine if its component devices are dax
capable.
- Fix an original bug in device-mapper table reference counting when
interrogating dax capability in the component device. This bug was
hidden by the following bug.
- Fix device-mapper to use the proper helper (dax_supported() instead
of the leaf helper generic_fsdax_supported()) to determine dax
operation of a stacked block device configuration. The original
implementation is only valid for one level of dax-capable block
device stacking. This bug was discovered while fixing the below
regression.
- Fix an infinite recursion regression introduced by broken attempts
to quiet the generic_fsdax_supported() path and make it bail out
before logging "dax capability not found" errors"
* tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix stack overflow when mounting fsdax pmem device
dm: Call proper helper to determine dax support
dm/dax: Fix table reference counts
|
|
Recycle the received page into the page_pool cache if the dma descriptors
arrived in a wrong order
Fixes: ca0e014609f05 ("net: mvneta: move skb build after descriptors processing")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a lockdep issue to avoid an asserting triggering during
early boot. There shouldn't be any incorrect behavior as the system
isn't concurrent at the time.
- The addition of a missing fence when installing early fixmap
mappings.
- A corretion to the K210 device tree's interrupt map.
- A fix for M-mode timer handling on the K210.
* tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Resurrect the MMIO timer implementation for M-mode systems
riscv: Fix Kendryte K210 device tree
riscv: Add sfence.vma after early page table changes
RISC-V: Take text_mutex in ftrace_init_nop()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some small USB and one Thunderbolt driver fixes.
Nothing major at all, just some fixes for reported issues, and a quirk
addition:
- typec fixes
- UAS disconnect fix
- usblp race fix
- ehci-hcd modversions build fix
- ignore wakeup quirk table addition
- thunderbolt DROM read fix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usblp: fix race between disconnect() and read()
ehci-hcd: Move include to keep CRC stable
usb: typec: intel_pmc_mux: Handle SCU IPC error conditions
USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook
USB: UAS: fix disconnect by unplugging a hub
usb: typec: ucsi: Prevent mode overrun
usb: typec: ucsi: acpi: Increase command completion timeout value
thunderbolt: Retry DROM read once if parsing fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial/fbcon fixes from Greg KH:
"Here are some small tty/serial and one more fbcon fix.
They include:
- serial core locking regression fixes
- new device ids for 8250_pci driver
- fbcon fix for syzbot found issue
All have been in linux-next with no reported issues"
* tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fbcon: Fix user font detection test at fbcon_resize().
serial: 8250_pci: Add Realtek 816a and 816b
serial: core: fix console port-lock regression
serial: core: fix port-lock initialisation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Two fixes for resulting from CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
experiments:
- complete a previous fix to reset a local structure containing
scanned system data properly so that the driver rescans, as it
should, on a second load.
- address a refcount underflow due to not paying attention to the
driver whitelest on unregister"
* tag 'edac_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/ghes: Check whether the driver is on the safe list correctly
EDAC/ghes: Clear scanned data on unload
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Just a couple of driver quirks"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: trackpoint - add new trackpoint variant IDs
Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists
|
|
This patch fixes the device name typo.
Fixes: 951ad4700313 ("iio: adc: ad7124: move chip ID & name on the chip_info table")
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200902134222.28357-1-mircea.caprioru@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When mounting fsdax pmem device, commit 6180bb446ab6 ("dax: fix
detection of dax support for non-persistent memory block devices")
introduces the stack overflow [1][2]. Here is the call path for
mounting ext4 file system:
ext4_fill_super
bdev_dax_supported
__bdev_dax_supported
dax_supported
generic_fsdax_supported
__generic_fsdax_supported
bdev_dax_supported
The call path leads to the infinite calling loop, so we cannot
call bdev_dax_supported() in __generic_fsdax_supported(). The sanity
checking of the variable 'dax_dev' is moved prior to the two
bdev_dax_pgoff() checks [3][4].
[1] https://lore.kernel.org/linux-nvdimm/1420999447.1004543.1600055488770.JavaMail.zimbra@redhat.com/
[2] https://lore.kernel.org/linux-nvdimm/alpine.LRH.2.02.2009141131220.30651@file01.intranet.prod.int.rdu2.redhat.com/
[3] https://lore.kernel.org/linux-nvdimm/CA+RJvhxBHriCuJhm-D8NvJRe3h2MLM+ZMFgjeJjrRPerMRLvdg@mail.gmail.com/
[4] https://lore.kernel.org/linux-nvdimm/20200903160608.GU878166@iweiny-DESK2.sc.intel.com/
Fixes: 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Cc: Coly Li <colyli@suse.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: John Pittman <jpittman@redhat.com>
Link: https://lore.kernel.org/r/20200917111549.6367-1-adrianhuang0701@gmail.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
DM was calling generic_fsdax_supported() to determine whether a device
referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that
they don't have to duplicate common generic checks. High level code
should call dax_supported() helper which that calls into appropriate
helper for the particular device. This problem manifested itself as
kernel messages:
dm-3: error: dax access failed (-95)
when lvm2-testsuite run in cases where a DM device was stacked on top of
another DM device.
Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices")
Cc: <stable@vger.kernel.org>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
A recent fix to the dm_dax_supported() flow uncovered a latent bug. When
dm_get_live_table() fails it is still required to drop the
srcu_read_lock(). Without this change the lvm2 test-suite triggers this
warning:
# lvm2-testsuite --only pvmove-abort-all.sh
WARNING: lock held when returning to user space!
5.9.0-rc5+ #251 Tainted: G OE
------------------------------------------------
lvm/1318 is leaving the kernel with locks still held!
1 lock held by lvm/1318:
#0: ffff9372abb5a340 (&md->io_barrier){....}-{0:0}, at: dm_get_live_table+0x5/0xb0 [dm_mod]
...and later on this hang signature:
INFO: task lvm:1344 blocked for more than 122 seconds.
Tainted: G OE 5.9.0-rc5+ #251
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:lvm state:D stack: 0 pid: 1344 ppid: 1 flags:0x00004000
Call Trace:
__schedule+0x45f/0xa80
? finish_task_switch+0x249/0x2c0
? wait_for_completion+0x86/0x110
schedule+0x5f/0xd0
schedule_timeout+0x212/0x2a0
? __schedule+0x467/0xa80
? wait_for_completion+0x86/0x110
wait_for_completion+0xb0/0x110
__synchronize_srcu+0xd1/0x160
? __bpf_trace_rcu_utilization+0x10/0x10
__dm_suspend+0x6d/0x210 [dm_mod]
dm_suspend+0xf6/0x140 [dm_mod]
Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices")
Cc: <stable@vger.kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Reported-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Link: https://lore.kernel.org/r/160045867590.25663.7548541079217827340.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
To show the trb ring of streams, use the exsiting ring files of bulk ep
to show trb ring of one specific stream ID, which stream ID's trb ring
will be shown, is controlled by a new debugfs file stream_id, this is to
avoid to create a large number of dir for every allocate stream IDs,
another debugfs file stream_context_array is created to show all the
allocated stream context array entries.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure xHC completes the configure endpoint command and xhci driver
sets the ring pointers correctly before we create the user readable
debugfs file.
In theory there was a small gap where a user could have read the
debugfs file and cause a NULL pointer dereference error as ring
pointer was not yet set, in practise we want this change to simplify
the upcoming streams debugfs support.
Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
controllers with XHCI_AVOID_BEI quirk cause too frequent interrupts
and affect power management.
To avoid interrupting on every isochronous interval the BEI (Block
Event Interrupt) flag is set for all except the last Isoch TRB in a URB.
This lead to event ring filling up in case several isoc URB were
queued and cancelled rapidly, which some controllers didn't
handle well, and thus the XHCI_AVOID_BEI quirk was introduced.
see commit 227a4fd801c8 ("usb: xhci: apply XHCI_AVOID_BEI quirk to all
Intel xHCI controllers")
With the XHCI_AVOID_BEI quirk each Isoch TRB will trigger an interrupt.
This can cause up to 8000 interrupts per second for isochronous transfers
with HD USB3 cameras, affecting power saving.
The event ring fits 256 events, instead of interrupting on every
isochronous TRB if XHCI_AVOID_BEI is set we make sure at least every
8th Isochronous TRB asserts an interrupt, clearing the event ring.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the xhci-plat.c is the platform driver, after the runtime pm is
enabled, the xhci_suspend is called if nothing is connected on
the port. When the system goes to suspend, it will call xhci_suspend again
if USB wakeup is enabled.
Since the runtime suspend wakeup setting is not always the same as
system suspend wakeup setting, eg, at runtime suspend we always need
wakeup if the controller is in low power mode; but at system suspend,
we may not need wakeup. So, we move the judgement after changing
wakeup setting.
[commit message rewording -Mathias]
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To reflect the current code status.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With this change, there will be a wakeup entry at /sys/../power/wakeup,
and the user could use this entry to choose whether enable xhci wakeup
features (wake up system from suspend) or not.
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some DRD controllers (eg, dwc3 & cdns3) have PHY management at
their own driver to cover both device and host mode, so add one
priv quirk for such users to skip PHY management from HCD core.
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The if {} condition is duplicated with outer if {} condition.
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some platforms (eg cdns3) may have special sequences between
xhci_bus_suspend and xhci_suspend, add .suspend_quick for it.
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some xhci hosts (eg dwc3 and cdns3) do not use OF to create
platform device, they create xhci-plat platform device runtime.
And these platforms may also have quirks, and the quirks could
be supplied by their parent device through platform data.
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Another bunch of fixes for I2C.
Jean's i801 patch is a cleanup on top of Volker's i801 patch, but it
will make dependency handling much easier if those two go together"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK
i2c: mediatek: Send i2c master code at more than 1MHz
i2c: mediatek: Fix generic definitions for bus frequency
i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
i2c: i801: Simplify the suspend callback
i2c: i801: Fix resume bug
i2c: aspeed: Mask IRQ status to relevant bits
|
|
The K210 doesn't implement rdtime in M-mode, and since that's where Linux runs
in the NOMMU systems that means we can't use rdtime. The K210 is the only
system that anyone is currently running NOMMU or M-mode on, so here we're just
inlining the timer read directly.
This also adds the CLINT driver as an !MMU dependency, as it's currently the
only timer driver availiable for these systems and without it we get a build
failure for some configurations.
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix order in trace_hardirqs_off_caller() to make locking state
consistent even if the IRQ tracer calls into lockdep again. Touches
common code. Acked-by Peter Zijlstra.
- Correctly handle secure storage violation exception to avoid kernel
panic triggered by user space misbehaviour.
- Switch the idle->seqcount over to using raw_write_*() to avoid
"suspicious RCU usage".
- Fix memory leaks on hard unplug in pci code.
- Use kvmalloc instead of kmalloc for larger allocations in zcrypt.
- Add few missing __init annotations to static functions to avoid
section mismatch complains when functions are not inlined.
* tag 's390-5.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: add 3f program exception handler
lockdep: fix order in trace_hardirqs_off_caller()
s390/pci: fix leak of DMA tables on hard unplug
s390/init: add missing __init annotations
s390/zcrypt: fix kmalloc 256k failure
s390/idle: fix suspicious RCU usage
|
|
Fix below sparse warning in dpmac.c.
warning: cast to restricted __le64
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix some parameter description mistakes.
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver-specific usage of the DMA_CTRL_ACK flag was replaced with a
custom flag in commit ceeeb99cd821 ("dmaengine: mxs: rename custom flag"),
but i2c-mxs was not updated to use the new flag, completely breaking I2C
transactions using DMA.
Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Call netif_tx_disable firstly before starting doing self-test to
avoid sending packet from networking core and self-test packet
simultaneously which may cause self-test failure or hw abnormal.
Fixes: 4aa218a4fe77 ("hinic: add self test support")
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently mscc_ocelot_init_ports() will skip initializing a port when it
doesn't have a phy-handle, so the ocelot->ports[port] pointer will be
NULL. Take this into consideration when tearing down the driver, and add
a new function ocelot_deinit_port() to the switch library, mirror of
ocelot_init_port(), which needs to be called by the driver for all ports
it has initialized.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver was not unregistering its network interfaces on unbind.
Now it is.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mscc_ocelot_probe() is already pretty large and hard to follow. So move
the code for parsing ports in a separate function.
This makes it easier for the next patch to just call
mscc_ocelot_release_ports from the error path of mscc_ocelot_init_ports.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ocelot_init() allocates memory, resets the switch and polls for a status
register, things which can fail. Stop probing the driver in that case,
and propagate the error result.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do not proceed probing if we couldn't allocate memory for the ports
array, just error out.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The VSC9953 Seville switch has 2 megabits of buffer split into 4360
words of 60 bytes each.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ocelot_port->ts_id is used to:
(a) populate skb->cb[0] for matching the TX timestamp in the PTP IRQ
with an skb.
(b) populate the REW_OP from the injection header of the ongoing skb.
Only then is ocelot_port->ts_id incremented.
This is a problem because, at least theoretically, another timestampable
skb might use the same ocelot_port->ts_id before that is incremented.
Normally all transmit calls are serialized by the netdev transmit
spinlock, but in this case, ocelot_port_add_txtstamp_skb() is also
called by DSA, which has started declaring the NETIF_F_LLTX feature
since commit 2b86cb829976 ("net: dsa: declare lockless TX feature for
slave ports"). So the logic of using and incrementing the timestamp id
should be atomic per port.
The solution is to use the global ocelot_port->ts_id only while
protected by the associated ocelot_port->ts_id_lock. That's where we
populate skb->cb[0]. Note that for ocelot, ocelot_port_add_txtstamp_skb
is called for the actual skb, but for felix, it is called for the skb's
clone. That is something which will also be changed in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TX-timestampable skb is added late to the ocelot_port->tx_skbs. It
is in a race with the TX timestamp IRQ, which checks that queue trying
to match the timestamp with the skb by the ts_id. The skb should be
added to the queue before the IRQ can fire.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The master code needs to being sent when the speed is more than
I2C_MAX_FAST_MODE_PLUS_FREQ, not I2C_MAX_FAST_MODE_FREQ in the
latest I2C-bus specification and user manual.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The max frequency of mediatek i2c controller driver is
I2C_MAX_HIGH_SPEED_MODE_FREQ, not I2C_MAX_FAST_MODE_PLUS_FREQ.
Fix it.
Fixes: 90224e6468e1 ("i2c: drivers: Use generic definitions for bus frequencies")
Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.9:
- Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing
crashes.
- Fix a long standing bug in our DMA mask handling that was hidden
until recently, and which caused problems with some drivers.
- Fix a boot failure on systems with large amounts of RAM, and no
hugepage support and using Radix MMU, only seen in the lab.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy,
Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav
Jain, and Vaidyanathan Srinivasan"
* tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute
cpuidle: pseries: Fix CEDE latency conversion from tb to us
powerpc/dma: Fix dma_map_ops::get_required_mask
Revert "powerpc/build: vdso linker warning for orphan sections"
powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc
selftests/powerpc: Skip PROT_SAO test in guests/LPARS
powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new CPU ID to the RAPL power capping driver and prevent
the ACPI processor idle driver from triggering RCU-lockdep complaints.
Specifics:
- Add support for the Lakefield chip to the RAPL power capping driver
(Ricardo Neri).
- Modify the ACPI processor idle driver to prevent it from triggering
RCU-lockdep complaints which has started to happen after recent
changes in that area (Peter Zijlstra)"
* tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Take over RCU-idle for C3-BM idle
cpuidle: Allow cpuidle drivers to take over RCU-idle
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
powercap: RAPL: Add support for Lakefield
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Two fixes for the AMD IOMMU driver:
- Fix a potential NULL-ptr dereference found by smatch
- Fix interrupt remapping when a device is assigned to a guest and
AVIC is enabled"
* tag 'iommu-fixes-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_mode
iommu/amd: Fix potential @entry null deref
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD/SPI NOR fixes from Vignesh Raghavendra:
"Revert patches that caused non volatile Quad Enable bit to be cleared
for certain SPI NOR flashes during module remove or during shutdown,
thus breaking backward compatibility"
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
* tag 'mtd/fixes-for-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: spi-nor: Add capability to disable flash quad mode"
Revert "mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()"
|
|
* pm-cpuidle:
ACPI: processor: Take over RCU-idle for C3-BM idle
cpuidle: Allow cpuidle drivers to take over RCU-idle
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
|
|
Fixes: 94cc89eb8fa5 ("regmap: debugfs: Fix handling of name string for debugfs init delays")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200918112002.15216-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit e52d58d54a32 ("iommu/amd: Use cmpxchg_double() when updating
128-bit IRTE") removed an assumption that modify_irte_ga always set
the valid bit, which requires the callers to set the appropriate value
for the struct irte_ga.valid bit before calling the function.
Similar to the commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn
bit after programming IRTE"), which is for the function
amd_iommu_deactivate_guest_mode().
The same change is also needed for the amd_iommu_activate_guest_mode().
Otherwise, this could trigger IO_PAGE_FAULT for the VFIO based VMs with
AVIC enabled.
Fixes: e52d58d54a321 ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200916111720.43913-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
After commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after
programming IRTE"), smatch warns:
drivers/iommu/amd/iommu.c:3870 amd_iommu_deactivate_guest_mode()
warn: variable dereferenced before check 'entry' (see line 3867)
Fix this by moving the @valid assignment to after @entry has been checked
for NULL.
Fixes: 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200910171621.12879-1-joao.m.martins@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add USB + SGMII/QSGMII multilink configuration sequences.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Link: https://lore.kernel.org/r/1600327846-9733-14-git-send-email-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add PCIe + USB Unique SSC multilink configuration sequences.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Link: https://lore.kernel.org/r/1600327846-9733-13-git-send-email-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for single link USB configuration.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Link: https://lore.kernel.org/r/1600327846-9733-12-git-send-email-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for single link SGMII/QSGMII configuration.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Link: https://lore.kernel.org/r/1600327846-9733-11-git-send-email-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
