| Age | Commit message (Collapse) | Author |
|---|
|
Backmerging to get v6.3-rc1 and sync with the other DRM trees.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
On s390 PCI functions may be hotplugged individually even when they
belong to a multi-function device. In particular on an SR-IOV device VFs
may be removed and later re-added.
In commit a50297cf8235 ("s390/pci: separate zbus creation from
scanning") it was missed however that struct pci_bus and struct
zpci_bus's resource list retained a reference to the PCI functions MMIO
resources even though those resources are released and freed on
hot-unplug. These stale resources may subsequently be claimed when the
PCI function re-appears resulting in use-after-free.
One idea of fixing this use-after-free in s390 specific code that was
investigated was to simply keep resources around from the moment a PCI
function first appeared until the whole virtual PCI bus created for
a multi-function device disappears. The problem with this however is
that due to the requirement of artificial MMIO addreesses (address
cookies) extra logic is then needed to keep the address cookies
compatible on re-plug. At the same time the MMIO resources semantically
belong to the PCI function so tying their lifecycle to the function
seems more logical.
Instead a simpler approach is to remove the resources of an individually
hot-unplugged PCI function from the PCI bus's resource list while
keeping the resources of other PCI functions on the PCI bus untouched.
This is done by introducing pci_bus_remove_resource() to remove an
individual resource. Similarly the resource also needs to be removed
from the struct zpci_bus's resource list. It turns out however, that
there is really no need to add the MMIO resources to the struct
zpci_bus's resource list at all and instead we can simply use the
zpci_bar_struct's resource pointer directly.
Fixes: a50297cf8235 ("s390/pci: separate zbus creation from scanning")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230306151014.60913-2-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Starting from an used_idx different than 0 is needed in use cases like
virtual machine migration. Not doing so and letting the caller set an
avail idx different than 0 causes destination device to try to use old
buffers that source driver already recover and are not available
anymore.
Since vdpa_sim does not support receive inflight descriptors as a
destination of a migration, let's set both avail_idx and used_idx the
same at vq start. This is how vhost-user works in a
VHOST_SET_VRING_BASE call.
Although the simple fix is to set last_used_idx at vdpasim_set_vq_state,
it would be reset at vdpasim_queue_ready. The last_avail_idx case is
fixed with commit 0e84f918fac8 ("vdpa_sim: not reset state in
vdpasim_queue_ready"). Since the only option is to make it equal to
last_avail_idx, adding the only change needed here.
This was discovered and tested live migrating the vdpa_sim_net device.
Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230302181857.925374-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently vhost_vdpa_cleanup() unmaps the DMA mappings by calling
`iommu_unmap(v->domain, map->start, map->size);`
from vhost_vdpa_general_unmap() when the parent vDPA driver doesn't
provide DMA config operations.
However, the IOMMU domain referred to by `v->domain` is freed in
vhost_vdpa_free_domain() before vhost_vdpa_cleanup() in
vhost_vdpa_release() which results in NULL pointer de-reference.
Accordingly, moving the call to vhost_vdpa_free_domain() in
vhost_vdpa_cleanup() would makes sense. This will also help
detaching the dma device in error handling of vhost_vdpa_alloc_domain().
This issue was observed on terminating QEMU with SIGQUIT.
Fixes: 037d4305569a ("vhost-vdpa: call vhost_vdpa_cleanup during the release")
Signed-off-by: Gautam Dawar <gautam.dawar@amd.com>
Message-Id: <20230301163203.29883-1-gautam.dawar@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
to race condition
In da9150_charger_probe, &charger->otg_work is bound with
da9150_charger_otg_work. da9150_charger_otg_ncb may be
called to start the work.
If we remove the module which will call da9150_charger_remove
to make cleanup, there may be a unfinished work. The possible
sequence is as follows:
Fix it by canceling the work before cleanup in the da9150_charger_remove
CPU0 CPUc1
|da9150_charger_otg_work
da9150_charger_remove |
power_supply_unregister |
device_unregister |
power_supply_dev_release|
kfree(psy) |
|
| power_supply_changed(charger->usb);
| //use
Fixes: c1a281e34dae ("power: Add support for DA9150 Charger")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.
Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.
The following hardware was used to test this issue:
Framework Laptop (Pre-production)
BIOS: INSYDE Corp, Revision: 3.2
TPM Device: NTC, Firmware Revision: 7.2
Dump of the faulty ACPI TPM2 table:
[000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table]
[004h 0004 4] Table Length : 0000004C
[008h 0008 1] Revision : 04
[009h 0009 1] Checksum : 2B
[00Ah 0010 6] Oem ID : "INSYDE"
[010h 0016 8] Oem Table ID : "TGL-ULT"
[018h 0024 4] Oem Revision : 00000002
[01Ch 0028 4] Asl Compiler ID : "ACPI"
[020h 0032 4] Asl Compiler Revision : 00040000
[024h 0036 2] Platform Class : 0000
[026h 0038 2] Reserved : 0000
[028h 0040 8] Control Address : 0000000000000000
[030h 0048 4] Start Method : 06 [Memory Mapped I/O]
[034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
[040h 0064 4] Minimum Log Length : 00010000
[044h 0068 8] Log Address : 000000004053D000
Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/hwmon/tmp513.c:610:34: error: ‘tmp51x_of_match’ defined but not used [-Werror=unused-const-variable=]
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312193723.478032-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When probing the ucd90320 access to some of the registers randomly fails.
Sometimes it NACKs a transfer, sometimes it returns just random data and
the PEC check fails.
Experimentation shows that this seems to be triggered by a register access
directly back to back with a previous register write. Experimentation also
shows that inserting a small delay after register writes makes the issue go
away.
Use a similar solution to what the max15301 driver does to solve the same
problem. Create a custom set of bus read and write functions that make sure
that the delay is added.
Fixes: a470f11c5ba2 ("hwmon: (pmbus/ucd9000) Add support for UCD90320 Power Sequencer")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230312160312.2227405-1-lars@metafoo.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
ret is set to 0 which do not indicate an error.
Return -EINVAL instead.
Fixes: a9e9dd9c6de5 ("hwmon: (ina3221) Read channel input source info from DT")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20230310075035.246083-1-marcus.folkesson@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
condition
In xgene_hwmon_probe, &ctx->workq is bound with xgene_hwmon_evt_work.
Then it will be started.
If we remove the driver which will call xgene_hwmon_remove to clean up,
there may be unfinished work.
The possible sequence is as follows:
Fix it by finishing the work before cleanup in xgene_hwmon_remove.
CPU0 CPU1
|xgene_hwmon_evt_work
xgene_hwmon_remove |
kfifo_free(&ctx->async_msg_fifo);|
|
|kfifo_out_spinlocked
|//use &ctx->async_msg_fifo
Fixes: 2ca492e22cb7 ("hwmon: (xgene) Fix crash when alarm occurs before driver probe")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230310084007.1403388-1-zyytlz.wz@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
|
|
Use gt_tuning_settings() for the recommended tunings rather than the one
for workarounds.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306204954.753739-2-lucas.demarchi@intel.com
|
|
dg1_gt_workarounds_init() is only ever called for DG1, so there is no
point checking it again.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306204954.753739-1-lucas.demarchi@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
|
|
Switching to BLK_MQ_F_BLOCKING wrongly removed the call to
blk_mq_end_request(). Add it back to have our IOs finished
Fixes: 91cc8fbcc8c7 ("ubi: block: set BLK_MQ_F_BLOCKING")
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
XDP is supported only if enough queues are present, so when reconfiguring
the queues set xdp_features accordingly.
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Suggested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Matteo Croce <teknoraver@meta.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Take into account LRO and GRO configuration setting device xdp_features
flag. Consider channel rq_wq_type enabling rx scatter-gatter support in
xdp_features flag and disable NETDEV_XDP_ACT_NDO_XMIT_SG since it is not
supported yet by the driver.
Moreover always enable NETDEV_XDP_ACT_NDO_XMIT as the ndo_xdp_xmit
callback does not require to load a dummy xdp program on the NIC.
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Co-developed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Take into account tx/rx queues reconfiguration setting device
xdp_features flag. Moreover consider NETIF_F_GRO flag in order to enable
ndo_xdp_xmit callback.
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ena nic allows xdp just if enough hw queues are available for XDP.
Take into account queues configuration setting xdp_features.
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
thunderx nic allows xdp just if enough hw queues are available for XDP.
Take into account queues configuration setting xdp_features.
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the driver detects during probe that firmware is in recovery
mode then i40e_init_recovery_mode() is called and the rest of
probe function is skipped including pci_set_drvdata(). Subsequent
i40e_shutdown() called during shutdown/reboot dereferences NULL
pointer as pci_get_drvdata() returns NULL.
To fix call pci_set_drvdata() also during entering to recovery mode.
Reproducer:
1) Lets have i40e NIC with firmware in recovery mode
2) Run reboot
Result:
[ 139.084698] i40e: Intel(R) Ethernet Connection XL710 Network Driver
[ 139.090959] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
[ 139.108438] i40e 0000:02:00.0: Firmware recovery mode detected. Limiting functionality.
[ 139.116439] i40e 0000:02:00.0: Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode.
[ 139.129499] i40e 0000:02:00.0: fw 8.3.64775 api 1.13 nvm 8.30 0x8000b78d 1.3106.0 [8086:1583] [15d9:084a]
[ 139.215932] i40e 0000:02:00.0 enp2s0f0: renamed from eth0
[ 139.223292] i40e 0000:02:00.1: Firmware recovery mode detected. Limiting functionality.
[ 139.231292] i40e 0000:02:00.1: Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode.
[ 139.244406] i40e 0000:02:00.1: fw 8.3.64775 api 1.13 nvm 8.30 0x8000b78d 1.3106.0 [8086:1583] [15d9:084a]
[ 139.329209] i40e 0000:02:00.1 enp2s0f1: renamed from eth0
...
[ 156.311376] BUG: kernel NULL pointer dereference, address: 00000000000006c2
[ 156.318330] #PF: supervisor write access in kernel mode
[ 156.323546] #PF: error_code(0x0002) - not-present page
[ 156.328679] PGD 0 P4D 0
[ 156.331210] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 156.335567] CPU: 26 PID: 15119 Comm: reboot Tainted: G E 6.2.0+ #1
[ 156.343126] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022
[ 156.353369] RIP: 0010:i40e_shutdown+0x15/0x130 [i40e]
[ 156.358430] Code: c1 fc ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 55 48 89 fd 53 48 8b 9f 48 01 00 00 <f0> 80 8b c2 06 00 00 04 f0 80 8b c0 06 00 00 08 48 8d bb 08 08 00
[ 156.377168] RSP: 0018:ffffb223c8447d90 EFLAGS: 00010282
[ 156.382384] RAX: ffffffffc073ee70 RBX: 0000000000000000 RCX: 0000000000000001
[ 156.389510] RDX: 0000000080000001 RSI: 0000000000000246 RDI: ffff95db49988000
[ 156.396634] RBP: ffff95db49988000 R08: ffffffffffffffff R09: ffffffff8bd17d40
[ 156.403759] R10: 0000000000000001 R11: ffffffff8a5e3d28 R12: ffff95db49988000
[ 156.410882] R13: ffffffff89a6fe17 R14: ffff95db49988150 R15: 0000000000000000
[ 156.418007] FS: 00007fe7c0cc3980(0000) GS:ffff95ea8ee80000(0000) knlGS:0000000000000000
[ 156.426083] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 156.431819] CR2: 00000000000006c2 CR3: 00000003092fc005 CR4: 0000000000770ee0
[ 156.438944] PKRU: 55555554
[ 156.441647] Call Trace:
[ 156.444096] <TASK>
[ 156.446199] pci_device_shutdown+0x38/0x60
[ 156.450297] device_shutdown+0x163/0x210
[ 156.454215] kernel_restart+0x12/0x70
[ 156.457872] __do_sys_reboot+0x1ab/0x230
[ 156.461789] ? vfs_writev+0xa6/0x1a0
[ 156.465362] ? __pfx_file_free_rcu+0x10/0x10
[ 156.469635] ? __call_rcu_common.constprop.85+0x109/0x5a0
[ 156.475034] do_syscall_64+0x3e/0x90
[ 156.478611] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 156.483658] RIP: 0033:0x7fe7bff37ab7
Fixes: 4ff0ee1af016 ("i40e: Introduce recovery mode support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230309184509.984639-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For l3s mode, skb->dev is set to ipvlan interface in ipvlan_nf_input():
skb->dev = addr->master->dev
but, skb->skb_iif remain unchanged, this will cause socket lookup failed
if a target socket is bound to a interface, like the following example:
ip link add ipvlan0 link eth0 type ipvlan mode l3s
ip addr add dev ipvlan0 192.168.124.111/24
ip link set ipvlan0 up
ping -c 1 -I ipvlan0 8.8.8.8
100% packet loss
This is because there is no match sk in __raw_v4_lookup() as sk->sk_bound_dev_if != dif(skb->skb_iif).
Fix this by make skb->skb_iif track skb->dev in ipvlan_nf_input().
Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/29865b1f-6db7-c07a-de89-949d3721ea30@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the TJA1103 user manual, the bit for the reversed role in MII
or RMII modes is bit 4.
Cc: <stable@vger.kernel.org> # 5.15+
Fixes: b050f2f15e04 ("phy: nxp-c45: add driver for tja1103")
Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com>
Link: https://lore.kernel.org/r/20230309100111.1246214-1-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twenty fixes all in drivers except the one zone storage revalidation
fix to sd.
The megaraid_sas fixes are more on the level of a driver update
(enabling crash dump and increasing lun number) but I thought you
could let this slide on -rc1 and the next most extensive update is a
load of fixes to mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix wrong zone_write_granularity value during revalidate
scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1
scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities
scsi: megaraid_sas: Update max supported LD IDs to 240
scsi: mpi3mr: Bad drive in topology results kernel crash
scsi: mpi3mr: NVMe command size greater than 8K fails
scsi: mpi3mr: Return proper values for failures in firmware init path
scsi: mpi3mr: Wait for diagnostic save during controller init
scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled
scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt
scsi: lpfc: Avoid usage of list iterator variable after loop
scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()
scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource()
scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERR
scsi: ufs: ufs-qcom: Remove impossible check
scsi: ufs: core: Add soft dependency on governor_simpleondemand
scsi: hisi_sas: Check devm_add_action() return value
scsi: qla2xxx: Add option to disable FC2 Target support
scsi: target: iscsi: Fix an error message in iscsi_check_key()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a recently introduced deadlock in the int340x thermal control
driver (Srinivas Pandruvada)"
* tag 'thermal-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: processor_thermal: Fix deadlock
|
|
The CI results for the 'fast request' patch set (enables error return
codes for fire-and-forget H2G messages) hit an issue with the KMD
sending context submission requests on an invalid context. That was
caused by a fault injection probe failing the context creation of a
kernel context. However, there was no return code checking on any of
the kernel context registration paths. So the driver kept going and
tried to use the kernel context for the record defaults process.
This would not cause any actual problems. The invalid requests would
be rejected by GuC and ultimately the start up sequence would
correctly wedge due to the context creation failure. But fixing the
issue correctly rather ignoring it means we won't get CI complaining
when the fast request patch lands and enables the extra error checking.
So fix it by checking for errors and aborting as appropriate when
creating kernel contexts. While at it, clean up some other submission
init related failure cleanup paths. Also, rename guc_init_lrc_mapping
to guc_init_submission as the former name hasn't been valid in a long
time.
v2: Add another wrapper to keep the flow balanced (Daniele)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217223308.3449737-3-John.C.Harrison@Intel.com
|
|
The stats worker thread management was mis-matched between
enable/disable call sites. Fix those up. Also, abstract the
cancel/enable code into a helper function rather than replicating in
multiple places.
v2: Rename the helpers and wrap the enable as well as the cancel
(review feedback from Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217223308.3449737-2-John.C.Harrison@Intel.com
|
|
If the queue of xdp xmit is not an independent queue, then when the xdp
xmit used all the desc, the xmit from the __dev_queue_xmit() may encounter
the following error.
net ens4: Unexpected TXQ (0) queue failure: -28
This patch adds a check whether sq is full in xdp xmit.
Fixes: 56434a01b12e ("virtio_net: add XDP_TX support")
Reported-by: Yichun Zhang <yichun@openresty.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Separate the logic of checking whether sq is full. The subsequent patch
will reuse this func.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The purpose of this is to facilitate the subsequent addition of new
functions without introducing a separate declaration.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct pn533_out_arg used as a temporary context for out_urb is not
initialized properly. Its uninitialized 'phy' field can be dereferenced in
error cases inside pn533_out_complete() callback function. It causes the
following failure:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc3-next-20230110-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:pn533_out_complete.cold+0x15/0x44 drivers/nfc/pn533/usb.c:441
Call Trace:
<IRQ>
__usb_hcd_giveback_urb+0x2b6/0x5c0 drivers/usb/core/hcd.c:1671
usb_hcd_giveback_urb+0x384/0x430 drivers/usb/core/hcd.c:1754
dummy_timer+0x1203/0x32d0 drivers/usb/gadget/udc/dummy_hcd.c:1988
call_timer_fn+0x1da/0x800 kernel/time/timer.c:1700
expire_timers+0x234/0x330 kernel/time/timer.c:1751
__run_timers kernel/time/timer.c:2022 [inline]
__run_timers kernel/time/timer.c:1995 [inline]
run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035
__do_softirq+0x1fb/0xaf6 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x123/0x180 kernel/softirq.c:650
irq_exit_rcu+0x9/0x20 kernel/softirq.c:662
sysvec_apic_timer_interrupt+0x97/0xc0 arch/x86/kernel/apic/apic.c:1107
Initialize the field with the pn533_usb_phy currently used.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9dab880d675b ("nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()")
Reported-by: syzbot+1e608ba4217c96d1952f@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309165050.207390-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pipe needs a certain amount of time during vblank to prefill
sufficiently. If the vblank is too short the relevant watermark
level must be disabled.
Start implementing the necessary calculations to check this.
Scaler and DSC prefill are left out for now as handling those
is not entirely trivial.
Also the PSR latency reporting override chicken bits would
need to be correctly configured based on the results of these
calculations. Just add some FIXMEs for now.
TODO: bspec isn't exactly crystal clear in its explanations
so quite a few open questions remain...
v2: Skip inacive pipes
Handle SAGV latency
v3: Rebase
v4: Fix handling of disabled wm levels (latency == 0)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306164854.25928-1-ville.syrjala@linux.intel.com
|
|
Extract the skl+ wm latency determination into a small helper
so that everyone has the same idea what the latency should be.
This introduces a slight functional change in that
skl_cursor_allocation() will now start to account for the
extra 4 usec that the kbk/cfl/cml IPC w/a adds.
v2: Rebase
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301162449.26672-2-ville.syrjala@linux.intel.com
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes.
msm and amdgpu are the vast majority of these, otherwise some
straggler misc from last week for nouveau and cirrus and a mailmap
update for a drm developer.
mailmap:
- add an entry
nouveau:
- fix system shutdown regression
- build warning fix
cirrus:
- NULL ptr deref fix
msm:
- fix invalid ptr free in syncobj cleanup
- sync GMU removal in teardown
- a5xx preemption fixes
- fix runpm imbalance
- DPU hw fixes
- stack corruption fix
- clear DSPP reservation
amdgpu:
- Misc display fixes
- UMC 8.10 fixes
- Driver unload fixes
- NBIO 7.3.0 fix
- Error checking fixes for soc15, nv, soc21 read register interface
- Fix video cap query for VCN 4.0.4
amdkfd:
- Fix return check in doorbell handling"
* tag 'drm-fixes-2023-03-10' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for nv
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15
drm/amdgpu: Fix the warning info when removing amdgpu device
drm/amdgpu: fix return value check in kfd
drm/amd: Fix initialization mistake for NBIO 7.3.0
drm/amdgpu: Fix call trace warning and hang when removing amdgpu device
mailmap: add mailmap entries for Faith.
drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer needed
drm/amd/display: Update clock table to include highest clock setting
drm/amd/pm: Enable ecc_info table support for smu v13_0_10
drm/amdgpu: Support umc node harvest config on umc v8_10
drm/connector: print max_requested_bpc in state debugfs
drm/display: Don't block HDR_OUTPUT_METADATA on unknown EOTF
drm/msm/dpu: clear DSPP reservations in rm release
drm/msm/disp/dpu: fix sc7280_pp base offset
drm/msm/dpu: fix stack smashing in dpu_hw_ctl_setup_blendstage
drm/msm/dpu: don't use DPU_CLK_CTRL_CURSORn for DMA SSPP clocks
drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
...
|
|
Move the display debugfs registration later, after initializing steps
for opregion/acpi/audio. These latter ones don't depend on the debugfs
entries, OTOH some debugfs entries may depend on the initialized state.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308162503.3219200-3-imre.deak@intel.com
|
|
Clean up the opregion state if something fails after
intel_opregion_setup() is called.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308162503.3219200-2-imre.deak@intel.com
|
|
without display
Atm, during system resume, the driver updates the display connector
information required by the opregion video extensions during system
resume, on platforms both with and without display being present. On
!HAS_DISPLAY platforms this will result in the crash with the stack
trace below, since the driver's connector state is not initialized on
those.
Bspec doesn't specify when each of the opregion functionality is
supported (depending on the presence of display), however we can presume
that none of the video extensions, nor the ACPI _DSM functions are
supported on !HAS_DISPLAY platforms; accordingly skip the corresponding
opregion/ACPI setup on those (also matching the Windows driver in this).
Keep sending the opregion notification about suspending/resuming the
whole adapter (vs. the display only which is a separate power state
notification) on all platforms, similarly to runtime suspend/resume.
This fixes the following:
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 1443 Comm: kworker/u40:55 Tainted: G U 6.2.0-rc8+ #58
Hardware name: LENOVO 82VB/LNVNB161216, BIOS KMCN09WW 04/26/2022
Workqueue: events_unbound async_run_entry_fn
RIP: 0010:drm_connector_list_iter_next+0x4f/0xb0
Call Trace:
<TASK>
intel_acpi_device_id_update+0x80/0x160 [i915]
intel_opregion_resume+0x2f/0x1e0 [i915]
? dg2_init_clock_gating+0x49/0xf0 [i915]
i915_drm_resume+0x137/0x190 [i915]
? __pfx_pci_pm_resume+0x10/0x10
dpm_run_callback+0x47/0x150
Cc: iczero <iczero@hellomouse.net>
Reported-and-tested-by: iczero <iczero@hellomouse.net>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8015
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308162503.3219200-1-imre.deak@intel.com
|
|
The recent fix for the deferred I/O by the commit
3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices")
caused a regression when the same fb device is opened/closed while
it's being used. It resulted in a frozen screen even if something
is redrawn there after the close. The breakage is because the patch
was made under a wrong assumption of a single open; in the current
code, fb_deferred_io_release() cleans up the page mapping of the
pageref list and it calls cancel_delayed_work_sync() unconditionally,
where both are no correct behavior for multiple opens.
This patch adds a refcount for the opens of the device, and applies
the cleanup only when all files get closed.
As both fb_deferred_io_open() and _close() are called always in the
fb_info lock (mutex), it's safe to use the normal int for the
refcounting.
Also, a useless BUG_ON() is dropped.
Fixes: 3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308105012.1845-1-tiwai@suse.de
|
|
After relocating the executable image, use the EFI memory attributes
protocol to remap the code and data regions with the appropriate
permissions.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Now that the zboot loader will invoke the EFI memory attributes protocol
to remap the decompressed code and rodata as read-only/executable, we
can set the PE/COFF header flag that indicates to the firmware that the
application does not rely on writable memory being executable at the
same time.
Cc: <stable@vger.kernel.org> # v6.2+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
intel_crtc_prepare_cleared_state() is unintentionally losing
the "inherited" flag. This will happen if intel_initial_commit()
is forced to go through the full modeset calculations for
whatever reason.
Afterwards the first real commit from userspace will not get
forced to the full modeset path, and thus eg. audio state may
not get recomputed properly. So if the monitor was already
enabled during boot audio will not work until userspace itself
does an explicit full modeset.
Cc: stable@vger.kernel.org
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223152048.20878-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
There are DRM fourcc formats that have pixels smaller than a byte, but the
conversion_buf_size() function assumes that pixels are a multiple of bytes
and use the struct drm_format_info .cpp field to calculate the dst_pitch.
Instead, calculate it by using the bits per pixel (bpp) and divide it by 8
to account for formats that have sub-byte pixels.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230307215039.346863-1-javierm@redhat.com
|
|
Prior to commit 5d8e6e6c10a3 ("nvmem: core: add an index parameter to
the cell") of_nvmem_cell_get() would return -ENOENT if the cell wasn't
found. Particularly, if of_property_match_string() returned -EINVAL,
that return code was passed as the index to of_parse_phandle(), which
then detected it as invalid and returned NULL. That led to an return
code of -ENOENT.
With the new code, the negative index will lead to an -EINVAL of
of_parse_phandle_with_optional_args() which pass straight to the
caller and break those who expect an -ENOENT.
Fix it by always returning -ENOENT.
Fixes: 5d8e6e6c10a3 ("nvmem: core: add an index parameter to the cell")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/2143916.GUh0CODmnK@steina-w/
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230310094845.139400-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Otherwise the virtqueue object to instate could point to invalid address
that was unmapped from the MTT:
mlx5_core 0000:41:04.2: mlx5_cmd_out_err:782:(pid 8321):
CREATE_GENERAL_OBJECT(0xa00) op_mod(0xd) failed, status
bad parameter(0x3), syndrome (0x5fa1c), err(-22)
Fixes: cae15c2ed8e6 ("vdpa/mlx5: Implement susupend virtqueue callback")
Cc: Eli Cohen <elic@nvidia.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Message-Id: <1676424640-11673-1-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
While unplugging the vp_vdpa device, it triggers a kernel panic
The root cause is: vdpa_mgmtdev_unregister() will accesses modern
devices which will cause a use after free.
So need to change the sequence in vp_vdpa_remove
[ 195.003359] BUG: unable to handle page fault for address: ff4e8beb80199014
[ 195.004012] #PF: supervisor read access in kernel mode
[ 195.004486] #PF: error_code(0x0000) - not-present page
[ 195.004960] PGD 100000067 P4D 1001b6067 PUD 1001b7067 PMD 1001b8067 PTE 0
[ 195.005578] Oops: 0000 1 PREEMPT SMP PTI
[ 195.005968] CPU: 13 PID: 164 Comm: kworker/u56:10 Kdump: loaded Not tainted 5.14.0-252.el9.x86_64 #1
[ 195.006792] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20221207gitfff6d81270b5-2.el9 unknown
[ 195.007556] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[ 195.008059] RIP: 0010:ioread8+0x31/0x80
[ 195.008418] Code: 77 28 48 81 ff 00 00 01 00 76 0b 89 fa ec 0f b6 c0 c3 cc cc cc cc 8b 15 ad 72 93 01 b8 ff 00 00 00 85 d2 75 0f c3 cc cc cc cc <8a> 07 0f b6 c0 c3 cc cc cc cc 83 ea 01 48 83 ec 08 48 89 fe 48 c7
[ 195.010104] RSP: 0018:ff4e8beb8067bab8 EFLAGS: 00010292
[ 195.010584] RAX: ffffffffc05834a0 RBX: ffffffffc05843c0 RCX: ff4e8beb8067bae0
[ 195.011233] RDX: ff1bcbd580f88000 RSI: 0000000000000246 RDI: ff4e8beb80199014
[ 195.011881] RBP: ff1bcbd587e39000 R08: ffffffff916fa2d0 R09: ff4e8beb8067ba68
[ 195.012527] R10: 000000000000001c R11: 0000000000000000 R12: ff1bcbd5a3de9120
[ 195.013179] R13: ffffffffc062d000 R14: 0000000000000080 R15: ff1bcbe402bc7805
[ 195.013826] FS: 0000000000000000(0000) GS:ff1bcbe402740000(0000) knlGS:0000000000000000
[ 195.014564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 195.015093] CR2: ff4e8beb80199014 CR3: 0000000107dea002 CR4: 0000000000771ee0
[ 195.015741] PKRU: 55555554
[ 195.016001] Call Trace:
[ 195.016233] <TASK>
[ 195.016434] vp_modern_get_status+0x12/0x20
[ 195.016823] vp_vdpa_reset+0x1b/0x50 [vp_vdpa]
[ 195.017238] virtio_vdpa_reset+0x3c/0x48 [virtio_vdpa]
[ 195.017709] remove_vq_common+0x1f/0x3a0 [virtio_net]
[ 195.018178] virtnet_remove+0x5d/0x70 [virtio_net]
[ 195.018618] virtio_dev_remove+0x3d/0x90
[ 195.018986] device_release_driver_internal+0x1aa/0x230
[ 195.019466] bus_remove_device+0xd8/0x150
[ 195.019841] device_del+0x18b/0x3f0
[ 195.020167] ? kernfs_find_ns+0x35/0xd0
[ 195.020526] device_unregister+0x13/0x60
[ 195.020894] unregister_virtio_device+0x11/0x20
[ 195.021311] device_release_driver_internal+0x1aa/0x230
[ 195.021790] bus_remove_device+0xd8/0x150
[ 195.022162] device_del+0x18b/0x3f0
[ 195.022487] device_unregister+0x13/0x60
[ 195.022852] ? vdpa_dev_remove+0x30/0x30 [vdpa]
[ 195.023270] vp_vdpa_dev_del+0x12/0x20 [vp_vdpa]
[ 195.023694] vdpa_match_remove+0x2b/0x40 [vdpa]
[ 195.024115] bus_for_each_dev+0x78/0xc0
[ 195.024471] vdpa_mgmtdev_unregister+0x65/0x80 [vdpa]
[ 195.024937] vp_vdpa_remove+0x23/0x40 [vp_vdpa]
[ 195.025353] pci_device_remove+0x36/0xa0
[ 195.025719] device_release_driver_internal+0x1aa/0x230
[ 195.026201] pci_stop_bus_device+0x6c/0x90
[ 195.026580] pci_stop_and_remove_bus_device+0xe/0x20
[ 195.027039] disable_slot+0x49/0x90
[ 195.027366] acpiphp_disable_and_eject_slot+0x15/0x90
[ 195.027832] hotplug_event+0xea/0x210
[ 195.028171] ? hotplug_event+0x210/0x210
[ 195.028535] acpiphp_hotplug_notify+0x22/0x80
[ 195.028942] ? hotplug_event+0x210/0x210
[ 195.029303] acpi_device_hotplug+0x8a/0x1d0
[ 195.029690] acpi_hotplug_work_fn+0x1a/0x30
[ 195.030077] process_one_work+0x1e8/0x3c0
[ 195.030451] worker_thread+0x50/0x3b0
[ 195.030791] ? rescuer_thread+0x3a0/0x3a0
[ 195.031165] kthread+0xd9/0x100
[ 195.031459] ? kthread_complete_and_exit+0x20/0x20
[ 195.031899] ret_from_fork+0x22/0x30
[ 195.032233] </TASK>
Fixes: ffbda8e9df10 ("vdpa/vp_vdpa : add vdpa tool support in vp_vdpa")
Tested-by: Lei Yang <leiyang@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20230214080924.131462-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
We currently have an issue with some BPPs when using DSC.
According to the HW team, the reason is that a single VDSC engine
instance has some BW limitations that must be accounted for.
So, whenever we approach around 90% of the CDCLK, a second VDSC engine
has to be used.
This always means using two slices. However, in our current code,
the amount of slices is calculated independently of whether
we need to enable the second VDSC engine or not.
This leads to some logical issues when, according to the pixel clock needs,
we need to enable the second VDSC engine.
But as we calculated previously that we can only use a single slice,
we can't do that and fail.
So, we need to fix that so that the number of VDSC engines enabled
should depend on the number of slices, and the number of slices
should also depend on BW requirements.
Lastly, we didn't have BPP limitation for ADLP/MTL/DG2 implemented,
which says that DSC output BPPs can only be chosen within the range of 8 to 27
(BSpec 49259).
All of this applied together allows us to fix existing FIFO underruns,
which we have in many DSC tests.
v2: - Replace min with clamp_t(Jani Nikula)
- Fix commit message(Swati Sharma)
- Added "Closes"(Swati Sharma)
BSpec: 49259
HSDES: 18027167222
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8231
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306080401.22552-1-stanislav.lisovskiy@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.3-2023-03-09:
amdgpu:
- Misc display fixes
- UMC 8.10 fixes
- Driver unload fixes
- NBIO 7.3.0 fix
- Error checking fixes for soc15, nv, soc21 read register interface
- Fix video cap query for VCN 4.0.4
amdkfd:
- Fix return check in doorbell handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310031314.1296929-1-alexander.deucher@amd.com
|
|
Added the video capability query support for VCN version 4_0_4
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
