summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-03-09drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21Alex Deucher
Properly skip non-existent registers as well. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442 Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-03-09drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15Alex Deucher
Properly skip non-existent registers as well. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442 Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-03-09drm/amdgpu: Fix the warning info when removing amdgpu devicelyndonli
Actually, the drm_dev_enter in psp_cmd_submit_buf does not protect anything. If DRM device is unplugged, it will always check the condition in WARN_ON. So drop drm_dev_enter and drm_dev_exit in psp_cmd_submit_buf. When removing amdgpu, the calling order is as follows: amdgpu_pci_remove drm_dev_unplug amdgpu_driver_unload_kms amdgpu_device_fini_hw amdgpu_device_ip_fini_early psp_hw_fini psp_ras_terminate psp_ta_unloadye psp_cmd_submit_buf [ 4507.740388] Call Trace: [ 4507.740389] <TASK> [ 4507.740391] psp_ta_unload+0x44/0x70 [amdgpu] [ 4507.740485] psp_ras_terminate+0x4d/0x70 [amdgpu] [ 4507.740575] psp_hw_fini+0x28/0xa0 [amdgpu] [ 4507.740662] amdgpu_device_fini_hw+0x328/0x442 [amdgpu] [ 4507.740791] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu] [ 4507.740875] amdgpu_pci_remove+0x5a/0x140 [amdgpu] [ 4507.740962] ? _raw_spin_unlock_irqrestore+0x27/0x43 [ 4507.740965] ? __pm_runtime_resume+0x60/0x90 [ 4507.740968] pci_device_remove+0x39/0xb0 [ 4507.740971] device_remove+0x46/0x70 [ 4507.740972] device_release_driver_internal+0xd1/0x160 [ 4507.740974] driver_detach+0x4a/0x90 [ 4507.740975] bus_remove_driver+0x6c/0xf0 [ 4507.740976] driver_unregister+0x31/0x50 [ 4507.740977] pci_unregister_driver+0x40/0x90 [ 4507.740978] amdgpu_exit+0x15/0x120 [amdgpu] v2: fix commit message style issue Signed-off-by: lyndonli <Lyndon.Li@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-09drm/amdgpu: fix return value check in kfdShashank Sharma
This patch fixes a return value check in kfd doorbell handling. This function should return 0(error) only when the ida_simple_get returns < 0(error), return > 0 is a success case. Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: 16f0013157bf ("drm/amdkfd: Allocate doorbells only when needed") Acked-by: Christian Koenig <chriatian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-09drm/amd: Fix initialization mistake for NBIO 7.3.0Mario Limonciello
The same strapping initialization issue that happened on NBIO 7.5.1 appears to be happening on NBIO 7.3.0. Apply the same fix to 7.3.0 as well. Note: This workaround relies upon the integrated GPU being enabled in BIOS. If the integrated GPU is disabled in BIOS a different workaround will be required. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-09drm/amdgpu: Fix call trace warning and hang when removing amdgpu devicelyndonli
On GPUs with RAS enabled, below call trace and hang are observed when shutting down device. v2: use DRM device unplugged flag instead of shutdown flag as the check to prevent memory wipe in shutdown stage. [ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu] [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu] [ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu] [ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu] [ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu] [ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] [ +0.000090] drm_dev_release+0x28/0x50 [drm] [ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm] [ +0.000011] devm_action_release+0x15/0x20 [ +0.000003] release_nodes+0x40/0xc0 [ +0.000001] devres_release_all+0x9e/0xe0 [ +0.000001] device_unbind_cleanup+0x12/0x80 [ +0.000003] device_release_driver_internal+0xff/0x160 [ +0.000001] driver_detach+0x4a/0x90 [ +0.000001] bus_remove_driver+0x6c/0xf0 [ +0.000001] driver_unregister+0x31/0x50 [ +0.000001] pci_unregister_driver+0x40/0x90 [ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu] Signed-off-by: lyndonli <Lyndon.Li@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-09scsi: ufs: mcq: Use active_reqs to check busy in clock scalingAsutosh Das
Multi Circular Queue doesn't use outstanding_reqs. However, the UFS clock scaling functions use outstanding_reqs to determine if there are requests pending. When MCQ is enabled, this check always returns false. Hence use active_reqs to check if there are pending requests. Fixes: eacb139b77ff ("scsi: ufs: core: mcq: Enable multi-circular queue") Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/a24e0d646aac70eae0fc5e05fac0c58bb7e6e680.1678317160.git.quic_asutoshd@quicinc.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-09scsi: core: Fix a procfs host directory removal regressionBart Van Assche
scsi_proc_hostdir_rm() decreases a reference counter and hence must only be called once per host that is removed. This change does not require a scsi_add_host_with_dma() change since scsi_add_host_with_dma() will return 0 (success) if scsi_proc_host_add() is called. Fixes: fc663711b944 ("scsi: core: Remove the /proc/scsi/${proc_name} directory earlier") Cc: John Garry <john.g.garry@oracle.com> Reported-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/all/ed6b8027-a9d9-1b45-be8e-df4e8c6c4605@oracle.com/ Reported-by: syzbot+645a4616b87a2f10e398@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-scsi/000000000000890fab05f65342b6@google.com/ Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230307214428.3703498-1-bvanassche@acm.org Tested-by: John Garry <john.g.garry@oracle.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-09scsi: core: Add BLIST_NO_VPD_SIZE for some VDASDLee Duncan
Some storage, such as AIX VDASD (virtual storage) and IBM 2076 (front end), fail as a result of commit c92a6b5d6335 ("scsi: core: Query VPD size before getting full page"). That commit changed getting SCSI VPD pages so that we now read just enough of the page to get the actual page size, then read the whole page in a second read. The problem is that the above mentioned hardware returns zero for the page size, because of a firmware error. In such cases, until the firmware is fixed, this new blacklist flag says to revert to the original method of reading the VPD pages, i.e. try to read a whole buffer's worth on the first try. [mkp: reworked somewhat] Fixes: c92a6b5d6335 ("scsi: core: Query VPD size before getting full page") Reported-by: Martin Wilck <mwilck@suse.com> Suggested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Duncan <lduncan@suse.com> Link: https://lore.kernel.org/r/20220928181350.9948-1-leeman.duncan@gmail.com Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-10power: supply: bq24190: Fix use after free bug in bq24190_remove due to race ↵Zheng Wang
condition In bq24190_probe, &bdi->input_current_limit_work is bound with bq24190_input_current_limit_work. When external power changed, it will call bq24190_charger_external_power_changed to start the work. If we remove the module which will call bq24190_remove to make cleanup, there may be a unfinished work. The possible sequence is as follows: CPU0 CPUc1 |bq24190_input_current_limit_work bq24190_remove | power_supply_unregister | device_unregister | power_supply_dev_release| kfree(psy) | | | power_supply_get_property_from_supplier | //use Fix it by finishing the work before cleanup in the bq24190_remove Fixes: 97774672573a ("power_supply: Initialize changed_work before calling device_add") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-03-10power: supply: axp288_fuel_gauge: Added check for negative valuesDenis Arefev
Variable 'pirq', which may receive negative value in platform_get_irq(). Used as an index in a function regmap_irq_get_virq(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Denis Arefev <arefev@swemel.ru> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-03-10power: supply: cros_usbpd: reclassify "default case!" as debugGrant Grundler
This doesn't need to be printed every second as an error: ... <3>[17438.628385] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case! <3>[17439.634176] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case! <3>[17440.640298] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case! ... Reduce priority from ERROR to DEBUG. Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-03-10power: supply: rk817: Fix unsigned comparison with less than zeroJiapeng Chong
The tmp is defined as u32 type, which results in invalid processing of tmp<0 in function rk817_read_or_set_full_charge_on_boot(). Therefore, drop the comparison. drivers/power/supply/rk817_charger.c:828 rk817_read_or_set_full_charge_on_boot() warn: unsigned 'tmp' is never less than zero. drivers/power/supply/rk817_charger.c:788 rk817_read_or_set_full_charge_on_boot() warn: unsigned 'tmp' is never less than zero. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3444 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Tested-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-03-09firmware: qcom: scm: fix bogus irq error at probeJohan Hovold
A recent commit added support for an optional interrupt which is only available on some platforms. Stop spamming the logs with bogus error messages on platforms that do not use this new optional resource: qcom_scm firmware:scm: error -ENXIO: IRQ index 0 not found Fixes: 6bf325992236 ("firmware: qcom: scm: Add wait-queue handling logic") Cc: Guru Das Srinagesh <quic_gurus@quicinc.com> Cc: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s Acked-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309111209.31606-1-johan+linaro@kernel.org
2023-03-09i2c: dev: Fix bus callback return valuesGeert Uytterhoeven
The i2cdev_{at,de}tach_adapter() callbacks are used for two purposes: 1. As notifier callbacks, when (un)registering I2C adapters created or destroyed after i2c_dev_init(), 2. As bus iterator callbacks, for registering already existing adapters from i2c_dev_init(), and for cleanup. Unfortunately both use cases expect different return values: the former expects NOTIFY_* return codes, while the latter expects zero or error codes, and aborts in case of error. Hence in case 2, as soon as i2cdev_{at,de}tach_adapter() returns (non-zero) NOTIFY_OK, the bus iterator aborts. This causes (a) only the first already existing adapter to be registered, leading to missing /dev/i2c-* entries, and (b) a failure to unregister all but the first I2C adapter during cleanup. Fix this by introducing separate callbacks for the bus iterator, wrapping the notifier functions, and always returning succes. Any errors inside these callback functions are unlikely to happen, and are fatal anyway. Fixes: cddf70d0bce71c2a ("i2c: dev: fix notifier return values") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-09i2c: Convert drivers to new .probe() callbackUwe Kleine-König
Now that .probe() was changed not to get the id parameter, drivers can be converted back to that with the eventual goal to drop .probe_new(). Implement that for the i2c drivers that are part of the i2c core. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-09i2c: mux: Convert all drivers to new .probe() callbackUwe Kleine-König
Now that .probe() was changed not to get the id parameter, drivers can be converted back to that with the eventual goal to drop .probe_new(). Implement that for the i2c mux drivers. Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-09i2c: Switch .probe() to not take an id parameterUwe Kleine-König
Commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type") introduced a new probe callback to convert i2c init routines to not take an i2c_device_id parameter. Now that all in-tree drivers are converted to the temporary .probe_new() callback, .probe() can be modified to match the desired prototype. Now that .probe() and .probe_new() have the same semantic, they can be defined as members of an anonymous union to save some memory and simplify the core code a bit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-09media: i2c: ov2685: convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://lore.kernel.org/lkml/20221121102838.16448-1-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-09media: i2c: ov5695: convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://lore.kernel.org/lkml/20221121102705.16092-1-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-09w1: ds2482: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Link: https://lore.kernel.org/lkml/20221118224540.619276-596-uwe@kleine-koenig.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-09serial: sc16is7xx: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/lkml/20221118224540.619276-572-uwe@kleine-koenig.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-09mtd: maps: pismo: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/lkml/20221118224540.619276-497-uwe@kleine-koenig.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-09misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/lkml/20221118224540.619276-483-uwe@kleine-koenig.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-09drm/i915/gsc: Fix race between HW init and GSC FW loadDaniele Ceraolo Spurio
The GSC FW load is a slow process (up to 250 ms), so we defer it to a dedicated worker to avoid stalling the init flow for that long. However, we currently start this worker before the HW init is complete, so there is a chance that the GSC loading code submits to the HW before the engine initialization has completed. We can easily fix this by starting the thread later in the gt_resume flow. From this later spot, the GSC code can still race with the default submission code; we functionally don't care who wins the race (the GSC load doesn't need any state), but since the whole point of the separate worker is to make the main thread faster, we prefer the default submission code to run first. Therefore, make an exception for driver probe and only and start the gsc load from uc_init_late. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230223172120.3304293-3-daniele.ceraolospurio@intel.com
2023-03-09drm/i915/gsc: flush the GSC worker before wedging on unloadDaniele Ceraolo Spurio
If we unload the driver and wedge before the GSC worker is complete, the worker will hit an error on its submission to the GSC engine and then exit. This is hard to hit for a user, but it is reproducible with skipping selftests. The error is handled gracefully by the worker, so there are no functional issues, but we still end up with an error message in dmesg, which is something we want to avoid as this is a supported scenario. We could modify the worker to better handle a wedging occurring during its execution, but that gets complicated for a couple of reasons: - We do want the error on runtime wedging, because there are implications for subsystems outside of GT (i.e., PXP, HDCP), it's only the error on driver unload that we want to silence. - The worker is responsible for multiple submissions (GSC FW load, HuC auth, SW proxy), so all of those will have to be adapted to handle the wedged_on_fini scenario. Therefore, it's much simpler to just wait for the worker to be done before wedging on driver removal, also considering that the worker will likely already be idle in the great majority of non-selftest scenarios. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230223172120.3304293-2-daniele.ceraolospurio@intel.com
2023-03-10Merge tag 'drm-msm-fixes-2023-03-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes msm-fixes for v6.3-rc2 - Fix for possible invalid ptr free in submit ioctl syncobj cleanup path. - Synchronize GMU removal in driver teardown path - a5xx preemption fixes - Fix runpm imbalance at unbind - DPU hw catalog fixes: - set DPU_MDP_PERIPH_0_REMOVED for sc8280xp as this is another chipset where the PERIPH_0 block of registers is not there - fix the DPU features supported in QCM2290 by comparing it with the downstream device tree - fix the length of registers in the sc7180_ctl from 0xe4 to 0x1dc - fix the max mixer line width for sm6115 and qcm2290 chipsets in the DPU catalog - fix the scaler version on sm8550, sc8280xp, sm8450, sm8250, sm8350 and sm6115. This was incorrectly populated on the SW version of the scaler library and not the scaler HW version - Drop dim layer support for msm8998 as its not indicated to be supported in the downstream DTSI - fix the DPU_CLK_CTRL bits for msm 8998 sspp blocks - Use DPU_CLK_CTRL_DMA* prefix instead of DPU_CLK_CTRL_CURSOR* for all chipsets for the DMA sspp blocks - fix the ping-pong block base address for sc7280 in the DPU HW catalog - Fix stack corruption issue in the dpu_hw_ctl_setup_blendstage() function as it was causing a negative left shift by protecting against an invalid index - Clear the DSPP reservations in dpu_rm_release(). This was missed out and as as result the DSPP was not released from the resource manager global state. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvH+VH_Wx3mFMG51CMnoiU06CM-+-WMhM73M42Qx7Bp4A@mail.gmail.com
2023-03-09drm/i915/dmc: Load DMC on MTLMadhumitha Tolakanahalli Pradeep
Add support to load DMC on MTL. According to the spec and based on tests done on real hardware, 0x7000 is a reasonable size limit that covers each possible payload. v2: - Tighten payload size limit. (Matt, Rodrigo) - Use a better name for the defined payload limit. (Rodrigo) Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230307195111.90767-1-gustavo.sousa@intel.com
2023-03-09Merge tag 'net-6.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter and bpf. Current release - regressions: - core: avoid skb end_offset change in __skb_unclone_keeptruesize() - sched: - act_connmark: handle errno on tcf_idr_check_alloc - flower: fix fl_change() error recovery path - ieee802154: prevent user from crashing the host Current release - new code bugs: - eth: bnxt_en: fix the double free during device removal - tools: ynl: - fix enum-as-flags in the generic CLI - fully inherit attrs in subsets - re-license uniformly under GPL-2.0 or BSD-3-clause Previous releases - regressions: - core: use indirect calls helpers for sk_exit_memory_pressure() - tls: - fix return value for async crypto - avoid hanging tasks on the tx_lock - eth: ice: copy last block omitted in ice_get_module_eeprom() Previous releases - always broken: - core: avoid double iput when sock_alloc_file fails - af_unix: fix struct pid leaks in OOB support - tls: - fix possible race condition - fix device-offloaded sendpage straddling records - bpf: - sockmap: fix an infinite loop error - test_run: fix &xdp_frame misplacement for LIVE_FRAMES - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR - netfilter: tproxy: fix deadlock due to missing BH disable - phylib: get rid of unnecessary locking - eth: bgmac: fix *initial* chip reset to support BCM5358 - eth: nfp: fix csum for ipsec offload - eth: mtk_eth_soc: fix RX data corruption issue Misc: - usb: qmi_wwan: add telit 0x1080 composition" * tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) tools: ynl: fix enum-as-flags in the generic CLI tools: ynl: move the enum classes to shared code net: avoid double iput when sock_alloc_file fails af_unix: fix struct pid leaks in OOB support eth: fealnx: bring back this old driver net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC net: microchip: sparx5: fix deletion of existing DSCP mappings octeontx2-af: Unlock contexts in the queue context cache in case of fault detection net/smc: fix fallback failed while sendmsg with fastopen ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause mailmap: update entries for Stephen Hemminger mailmap: add entry for Maxim Mikityanskiy nfc: change order inside nfc_se_io error path ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation net: usb: qmi_wwan: add Telit 0x1080 composition net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990 netfilter: conntrack: adopt safer max chain length net: tls: fix device-offloaded sendpage straddling records ...
2023-03-09Merge tag 'for-linus-2023030901' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - fix potential out of bound write of zeroes in HID core with a specially crafted uhid device (Lee Jones) - fix potential use-after-free in work function in intel-ish-hid (Reka Norman) - selftests config fixes (Benjamin Tissoires) - few device small fixes and support * tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded selftest: hid: fix hid_bpf not set in config HID: uhid: Over-ride the default maximum data buffer value with our own HID: core: Provide new max_buffer_size attribute to over-ride the default
2023-03-09drm/i915/display/mtl: Program latch to phy resetJosé Roberto de Souza
Latch reset of phys during DC9 and when driver is unloaded to avoid phy reset. Specification ask us to program it closer to the step that enables DC9 in DC_STATE_EN but doing this way allow us to sanitize the phy latch during driver load. BSpec: 49197 Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-6-radhakrishna.sripada@intel.com
2023-03-09drm/i915/fbdev: lock the fbdev obj before vma pinTejas Upadhyay
lock the fbdev obj before calling into i915_vma_pin_iomap(). This helps to solve below : <7>[ 93.563308] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <4>[ 93.581844] ------------[ cut here ]------------ <4>[ 93.581855] WARNING: CPU: 12 PID: 625 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:424 i915_gem_object_pin_map+0x152/0x1c0 [i915] Fixes: f0b6b01b3efe ("drm/i915: Add ww context to intel_dpt_pin, v2.") Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-5-radhakrishna.sripada@intel.com
2023-03-09drm/i915/mtl: Fix Wa_16015201720 implementationRadhakrishna Sripada
The commit 2357f2b271ad ("drm/i915/mtl: Initial display workarounds") extended the workaround Wa_16015201720 to MTL. However the registers that the original WA implemented moved for MTL. Implement the workaround with the correct register. v3: Skip clock gating for pipe C, D DMC's and fix the title Fixes: 2357f2b271ad ("drm/i915/mtl: Initial display workarounds") Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-2-radhakrishna.sripada@intel.com
2023-03-09firmware: xilinx: don't make a sleepable memory allocation from an atomic ↵Roman Gushchin
context The following issue was discovered using lockdep: [ 6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209 [ 6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0 [ 6.702431] 2 locks held by swapper/0/1: [ 6.706300] #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90 [ 6.714900] #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140 [ 6.723156] irq event stamp: 304030 [ 6.726596] hardirqs last enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0 [ 6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140 [ 6.744742] softirqs last enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894 [ 6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280 [ 6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G U 5.15.36 #2 [ 6.768048] Hardware name: xlnx,zynqmp (DT) [ 6.772179] Call trace: [ 6.774584] dump_backtrace+0x0/0x300 [ 6.778197] show_stack+0x18/0x30 [ 6.781465] dump_stack_lvl+0xb8/0xec [ 6.785077] dump_stack+0x1c/0x38 [ 6.788345] ___might_sleep+0x1a8/0x2a0 [ 6.792129] __might_sleep+0x6c/0xd0 [ 6.795655] kmem_cache_alloc_trace+0x270/0x3d0 [ 6.800127] do_feature_check_call+0x100/0x220 [ 6.804513] zynqmp_pm_invoke_fn+0x8c/0xb0 [ 6.808555] zynqmp_pm_clock_getstate+0x90/0xe0 [ 6.813027] zynqmp_pll_is_enabled+0x8c/0x120 [ 6.817327] zynqmp_pll_enable+0x38/0xc0 [ 6.821197] clk_core_enable+0x144/0x400 [ 6.825067] clk_core_enable+0xd4/0x400 [ 6.828851] clk_core_enable+0xd4/0x400 [ 6.832635] clk_core_enable+0xd4/0x400 [ 6.836419] clk_core_enable+0xd4/0x400 [ 6.840203] clk_core_enable+0xd4/0x400 [ 6.843987] clk_core_enable+0xd4/0x400 [ 6.847771] clk_core_enable+0xd4/0x400 [ 6.851555] clk_core_enable_lock+0x24/0x50 [ 6.855683] clk_enable+0x24/0x40 [ 6.858952] fclk_probe+0x84/0xf0 [ 6.862220] platform_probe+0x8c/0x110 [ 6.865918] really_probe+0x110/0x5f0 [ 6.869530] __driver_probe_device+0xcc/0x210 [ 6.873830] driver_probe_device+0x64/0x140 [ 6.877958] __driver_attach+0x114/0x1f0 [ 6.881828] bus_for_each_dev+0xe8/0x160 [ 6.885698] driver_attach+0x34/0x50 [ 6.889224] bus_add_driver+0x228/0x300 [ 6.893008] driver_register+0xc0/0x1e0 [ 6.896792] __platform_driver_register+0x44/0x60 [ 6.901436] fclk_driver_init+0x1c/0x28 [ 6.905220] do_one_initcall+0x104/0x590 [ 6.909091] kernel_init_freeable+0x254/0x2bc [ 6.913390] kernel_init+0x24/0x130 [ 6.916831] ret_from_fork+0x10/0x20 Fix it by passing the GFP_ATOMIC gfp flag for the corresponding memory allocation. Fixes: acfdd18591ea ("firmware: xilinx: Use hash-table for api feature check") Cc: stable <stable@kernel.org> Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20230308222602.123866-1-roman.gushchin@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: vt: protect KD_FONT_OP_GET_TALL from unbound accessSamuel Thibault
In ioctl(KD_FONT_OP_GET_TALL), userland tells through op->height which vpitch should be used to copy over the font. In con_font_get, we were not checking that it is within the maximum height value, and thus userland could make the vc->vc_sw->con_font_get(vc, &font, vpitch); call possibly overflow the allocated max_font_size bytes, and the copy_to_user(op->data, font.data, c) call possibly read out of that allocated buffer. By checking vpitch against max_font_height, the max_font_size buffer will always be large enough for the vc->vc_sw->con_font_get(vc, &font, vpitch) call (since we already prevent loading a font larger than that), and c = (font.width+7)/8 * vpitch * font.charcount will always remain below max_font_size. Fixes: 24d69384bcd3 ("VT: Add KD_FONT_OP_SET/GET_TALL operations") Reported-by: syzbot+3af17071816b61e807ed@syzkaller.appspotmail.com Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230306094921.tik5ewne4ft6mfpo@begin Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: qcom-geni: drop bogus uart_write_wakeup()Johan Hovold
Drop the bogus uart_write_wakeup() from when setting up a new DMA transfer, which does not free up any more space in the ring buffer. Any pending writers will be woken up when the transfer completes. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-5-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: qcom-geni: fix mapping of empty DMA bufferJohan Hovold
Make sure that there is data in the ring buffer before trying to set up a zero-length DMA transfer. This specifically fixes the following warning when unmapping the empty buffer on the sc8280xp-crd: WARNING: CPU: 0 PID: 138 at drivers/iommu/dma-iommu.c:1046 iommu_dma_unmap_page+0xbc/0xd8 ... Call trace: iommu_dma_unmap_page+0xbc/0xd8 dma_unmap_page_attrs+0x30/0x1c8 geni_se_tx_dma_unprep+0x28/0x38 qcom_geni_serial_isr+0x358/0x75c Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable <stable@kernel.org> Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: qcom-geni: fix DMA mapping leak on shutdownJohan Hovold
Fix what appears to be a copy-paste error that can lead to a leaked DMA mapping on close() and failure to restart TX after the port is reopened. Note that rx_dma_addr is generally NULL when qcom_geni_serial_stop_tx_dma() is called as part of shutdown() (but tx_dma_addr need not be). Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable <stable@kernel.org> Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: qcom-geni: fix console shutdown hangJohan Hovold
A recent commit added back the calls top stop tx and rx to shutdown() which had previously been removed by commit e83766334f96 ("tty: serial: qcom_geni_serial: No need to stop tx/rx on UART shutdown") in order to be able to use kgdb after stopping the getty. Not only did this again break kgdb, but it also broke serial consoles more generally by hanging TX when stopping the getty during reboot. The underlying problem has been there since the driver was first merged and fixing it is going to be a bit involved so simply stop calling the broken stop functions during shutdown for consoles for now. Fixes: d8aca2f96813 ("tty: serial: qcom-geni-serial: stop operations in progress at shutdown") Cc: stable <stable@kernel.org> Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serdev: Set fwnode for serdev devicesSaravana Kannan
This allow fw_devlink to do dependency tracking for serdev devices. Reported-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/lkml/03b70a8a-0591-f28b-a567-9d2f736f17e5@gmail.com/ Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230302023509.319903-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: serial: fsl_lpuart: fix race on RX DMA shutdownAlexander Sverdlin
From time to time DMA completion can come in the middle of DMA shutdown: <process ctx>: <IRQ>: lpuart32_shutdown() lpuart_dma_shutdown() del_timer_sync() lpuart_dma_rx_complete() lpuart_copy_rx_to_tty() mod_timer() lpuart_dma_rx_free() When the timer fires a bit later, sport->dma_rx_desc is NULL: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 pc : lpuart_copy_rx_to_tty+0xcc/0x5bc lr : lpuart_timer_func+0x1c/0x2c Call trace: lpuart_copy_rx_to_tty lpuart_timer_func call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq __irq_exit_rcu irq_exit handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler ... To fix this fold del_timer_sync() into lpuart_dma_rx_free() after dmaengine_terminate_sync() to make sure timer will not be re-started in lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete(). Fixes: 4a8588a1cf86 ("serial: fsl_lpuart: delete timer on shutdown") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20230309134302.74940-2-alexander.sverdlin@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by defaultKumaravel Thiagarajan
Commit 32bb477fa7bf ("serial: 8250_pci1xxxx: Add driver for quad-uart support") made the SERIAL_8250_PCI1XXXX driver enabled when SERIAL_8250 is enabled, disable it as this driver does not need to be enabled by default Fixes: 32bb477fa7bf ("serial: 8250_pci1xxxx: Add driver for quad-uart support") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/lkml/CAHk-=whhFCeeuo6vTEmNSx6S-KKkugxgzN_W5Z6v-9yH9gc3Zw@mail.gmail.com/ Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230305145124.13444-1-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_fsl: fix handle_irq lockingJohan Hovold
The 8250 handle_irq callback is not just called from the interrupt handler but also from a timer callback when polling (e.g. for ports without an interrupt line). Consequently the callback must explicitly disable interrupts to avoid a potential deadlock with another interrupt in polled mode. Fix up the two paths in the freescale callback that failed to re-enable interrupts when polling. Fixes: 853a9ae29e97 ("serial: 8250: fix handle_irq locking") Cc: stable@vger.kernel.org # 5.13 Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y/xYzqp4ogmOF5t0@kili Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230227085046.24282-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_em: Fix UART port typeBiju Das
As per HW manual for EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART IP found on EMMA mobile SoC is Register-compatible with the general-purpose 16750 UART chip. Fix UART port type as 16750 and enable 64-bytes fifo support. Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250: ASPEED_VUART: select REGMAP instead of depending on itRandy Dunlap
REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable") Cc: stable <stable@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oskar Senft <osk@google.com> Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-9-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: serial: fsl_lpuart: skip waiting for transmission complete when ↵Sherry Sun
UARTCTRL_SBK is asserted According to LPUART RM, Transmission Complete Flag becomes 0 if queuing a break character by writing 1 to CTRL[SBK], so here need to skip waiting for transmission complete when UARTCTRL_SBK is asserted, otherwise the kernel may stuck here. And actually set_termios() adds transmission completion waiting to avoid data loss or data breakage when changing the baud rate, but we don't need to worry about this when queuing break characters. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230223093941.31790-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config ↵Tom Rix
dependency" This reverts commit 5779a072c248db7a40cfd0f5ea958097fd1d9a30. This results in a link error of ld: drivers/tty/serial/earlycon.o: in function `parse_options': drivers/tty/serial/earlycon.c:99: undefined reference to `uart_parse_earlycon' When the config is in this state CONFIG_SERIAL_CORE=m CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_FSL_LPUART=m CONFIG_SERIAL_FSL_LPUART_CONSOLE=y Fixes: 5779a072c248 ("tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency") Cc: stable <stable@kernel.org> Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230226173846.236691-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09dm crypt: avoid accessing uninitialized taskletMike Snitzer
When neither "no_read_workqueue" nor "no_write_workqueue" are enabled, tasklet_trylock() in crypt_dec_pending() may still return false due to an uninitialized state, and dm-crypt will unnecessarily do io completion in io_queue workqueue instead of current context. Fix this by adding an 'in_tasklet' flag to dm_crypt_io struct and initialize it to false in crypt_io_init(). Set this flag to true in kcryptd_queue_crypt() before calling tasklet_schedule(). If set crypt_dec_pending() will punt io completion to a workqueue. This also nicely avoids the tasklet_trylock/unlock hack when tasklets aren't in use. Fixes: 8e14f610159d ("dm crypt: do not call bio_endio() from the dm-crypt tasklet") Cc: stable@vger.kernel.org Reported-by: Hou Tao <houtao1@huawei.com> Suggested-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-03-09usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"Ziyang Huang
Some boards might use USB-A female connector for USB ports, however, the port could be connected to a dual-mode USB controller, making it also behaves as a peripheral device if male-to-male cable is connected. In this case, the dts looks like this: &usb0 { status = "okay"; dr_mode = "otg"; usb-role-switch; role-switch-default-mode = "host"; }; After boot, dwc2_ovr_init() sets GOTGCTL to GOTGCTL_AVALOVAL and call dwc2_force_mode() with parameter host=false, which causes inconsistent mode - The hardware is in peripheral mode while the kernel status is in host mode. What we can do now is to call dwc2_drd_role_sw_set() to switch to device mode, and everything should work just fine now, even switching back to none(default) mode afterwards. Fixes: e14acb876985 ("usb: dwc2: drd: add role-switch-default-node support") Cc: stable <stable@kernel.org> Signed-off-by: Ziyang Huang <hzyitc@outlook.com> Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/SG2PR01MB204837BF68EDB0E343D2A375C9A59@SG2PR01MB2048.apcprd01.prod.exchangelabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09mmc: dw_mmc-starfive: Fix initialization of prev_errWilliam Qiu
Fix a bug by making sure prev_err doesn't get used when being uninitialized. Signed-off-by: William Qiu <william.qiu@starfivetech.com> Reported-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Fixes: 9e622229bbf4 ("mmc: starfive: Add sdio/emmc driver support") Link: https://lore.kernel.org/r/20230307024646.10216-3-william.qiu@starfivetech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-14 21:12:56 +0000