summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-03-09mmc: sdhci_am654: lower power-on failed message severityFrancesco Dolcini
Lower the power-on failed message severity from warn to info when the controller does not power-up. It's normal to have this situation when the SD card slot is empty, therefore we should not warn the user about it. Fixes: 7ca0f166f5b2 ("mmc: sdhci_am654: Add workaround for card detect debounce timer") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230306162751.163369-1-francesco@dolcini.it Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-03-09drm/tests: helpers: Drop empty platform remove functionUwe Kleine-König
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230224221417.1712368-1-u.kleine-koenig@pengutronix.de
2023-03-09usb: typec: tcpm: fix warning when handle discover_identity messageXu Yang
Since both source and sink device can send discover_identity message in PD3, kernel may dump below warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 169 at drivers/usb/typec/tcpm/tcpm.c:1446 tcpm_queue_vdm+0xe0/0xf0 Modules linked in: CPU: 0 PID: 169 Comm: 1-0050 Not tainted 6.1.1-00038-g6a3c36cf1da2-dirty #567 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tcpm_queue_vdm+0xe0/0xf0 lr : tcpm_queue_vdm+0x2c/0xf0 sp : ffff80000c19bcd0 x29: ffff80000c19bcd0 x28: 0000000000000001 x27: ffff0000d11c8ab8 x26: ffff0000d11cc000 x25: 0000000000000000 x24: 00000000ff008081 x23: 0000000000000001 x22: 00000000ff00a081 x21: ffff80000c19bdbc x20: 0000000000000000 x19: ffff0000d11c8080 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000d716f580 x14: 0000000000000001 x13: ffff0000d716f507 x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000020 x9 : 00000000000ee098 x8 : 00000000ffffffff x7 : 000000000000001c x6 : ffff0000d716f580 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff80000c19bdbc x1 : 00000000ff00a081 x0 : 0000000000000004 Call trace: tcpm_queue_vdm+0xe0/0xf0 tcpm_pd_rx_handler+0x340/0x1ab0 kthread_worker_fn+0xcc/0x18c kthread+0x10c/0x110 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- Below sequences may trigger this warning: tcpm_send_discover_work(work) tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0); tcpm_queue_vdm(port, header, data, count); port->vdm_state = VDM_STATE_READY; vdm_state_machine_work(work); <-- received discover_identity from partner vdm_run_state_machine(port); port->vdm_state = VDM_STATE_SEND_MESSAGE; mod_vdm_delayed_work(port, x); tcpm_pd_rx_handler(work); tcpm_pd_data_request(port, msg); tcpm_handle_vdm_request(port, msg->payload, cnt); tcpm_queue_vdm(port, response[0], &response[1], rlen - 1); --> WARN_ON(port->vdm_state > VDM_STATE_DONE); For this case, the state machine could still send out discover identity message later if we skip current discover_identity message. So we should handle the received message firstly and override the pending discover_identity message without warning in this case. Then, a delayed send_discover work will send discover_identity message again. Fixes: e00943e91678 ("usb: typec: tcpm: PD3.0 sinks can send Discover Identity even in device mode") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230216031515.4151117-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: typec: tcpm: fix create duplicate source-capabilities fileXu Yang
The kernel will dump in the below cases: sysfs: cannot create duplicate filename '/devices/virtual/usb_power_delivery/pd1/source-capabilities' 1. After soft reset has completed, an Explicit Contract negotiation occurs. The sink device will receive source capabilitys again. This will cause a duplicate source-capabilities file be created. 2. Power swap twice on a device that is initailly sink role. This will unregister existing capabilities when above cases occurs. Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230215054951.238394-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: gadget: u_audio: don't let userspace block driver unbindAlvin Šipraga
In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free() via g_audio_cleanup() will disconnect the card and then wait for all resources to be released, which happens when the refcount falls to zero. Since userspace can keep the refcount incremented by not closing the relevant file descriptor, the call to unbind may block indefinitely. This can cause a deadlock during reboot, as evidenced by the following blocked task observed on my machine: task:reboot state:D stack:0 pid:2827 ppid:569 flags:0x0000000c Call trace: __switch_to+0xc8/0x140 __schedule+0x2f0/0x7c0 schedule+0x60/0xd0 schedule_timeout+0x180/0x1d4 wait_for_completion+0x78/0x180 snd_card_free+0x90/0xa0 g_audio_cleanup+0x2c/0x64 afunc_unbind+0x28/0x60 ... kernel_restart+0x4c/0xac __do_sys_reboot+0xcc/0x1ec __arm64_sys_reboot+0x28/0x30 invoke_syscall+0x4c/0x110 ... The issue can also be observed by opening the card with arecord and then stopping the process through the shell before unbinding: # arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo ^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null # echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind (observe that the unbind command never finishes) Fix the problem by using snd_card_free_when_closed() instead, which will still disconnect the card as desired, but defer the task of freeing the resources to the core once userspace closes its file descriptor. Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Cc: stable@vger.kernel.org Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Reviewed-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20230302163648.3349669-1-alvin@pqrs.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: misc: onboard-hub: add support for Microchip USB2517 USB 2.0 hubAlexander Stein
Add support for Microchip USB2517 USB 2.0 hub to the onboard usb hub driver. Adopt the generic usb-device compatible ("usbVID,PID"). This hub has the same reset timings as USB2514, so reuse that one. There is also an USB2517I which just has industrial temperature range. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: stable <stable@kernel.org> Acked-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20230223073920.2912298-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: dwc3: gadget: Add 1ms delay after end transfer command without IOCWesley Cheng
Previously, there was a 100uS delay inserted after issuing an end transfer command for specific controller revisions. This was due to the fact that there was a GUCTL2 bit field which enabled synchronous completion of the end transfer command once the CMDACT bit was cleared in the DEPCMD register. Since this bit does not exist for all controller revisions and the current implementation heavily relies on utizling the EndTransfer command completion interrupt, add the delay back in for uses where the interrupt on completion bit is not set, and increase the duration to 1ms for the controller to complete the command. An issue was seen where the USB request buffer was unmapped while the DWC3 controller was still accessing the TRB. However, it was confirmed that the end transfer command was successfully submitted. (no end transfer timeout) In situations, such as dwc3_gadget_soft_disconnect() and __dwc3_gadget_ep_disable(), the dwc3_remove_request() is utilized, which will issue the end transfer command, and follow up with dwc3_gadget_giveback(). At least for the USB ep disable path, it is required for any pending and started requests to be completed and returned to the function driver in the same context of the disable call. Without the GUCTL2 bit, it is not ensured that the end transfer is completed before the buffers are unmapped. Fixes: cf2f8b63f7f1 ("usb: dwc3: gadget: Remove END_TRANSFER delay") Cc: stable <stable@kernel.org> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20230306200557.29387-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: dwc3: Fix a typo in field nameVincenzo Palazzo
Fix a typo inside the dwc3 struct docs. Fixes: 63d7f9810a38 ("usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bug") Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20230302150706.229008-1-vincenzopalazzodev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: ucsi_acpi: Increase the command completion timeoutHans de Goede
Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command completion timeout value") increased the timeout from 5 seconds to 60 seconds due to issues related to alternate mode discovery. After the alternate mode discovery switch to polled mode the timeout was reduced, but instead of being set back to 5 seconds it was reduced to 1 second. This is causing problems when using a Lenovo ThinkPad X1 yoga gen7 connected over Type-C to a LG 27UL850-W (charging DP over Type-C). When the monitor is already connected at boot the following error is logged: "PPM init failed (-110)", /sys/class/typec is empty and on unplugging the NULL pointer deref fixed earlier in this series happens. When the monitor is connected after boot the following error is logged instead: "GET_CONNECTOR_STATUS failed (-110)". Setting the timeout back to 5 seconds fixes both cases. Fixes: e08065069fc7 ("usb: typec: ucsi: acpi: Reduce the command completion timeout") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230308154244.722337-4-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: ucsi: Fix ucsi->connector raceHans de Goede
ucsi_init() which runs from a workqueue sets ucsi->connector and on an error will clear it again. ucsi->connector gets dereferenced by ucsi_resume(), this checks for ucsi->connector being NULL in case ucsi_init() has not finished yet; or in case ucsi_init() has failed. ucsi_init() setting ucsi->connector and then clearing it again on an error creates a race where the check in ucsi_resume() may pass, only to have ucsi->connector free-ed underneath it when ucsi_init() hits an error. Fix this race by making ucsi_init() store the connector array in a local variable and only assign it to ucsi->connector on success. Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230308154244.722337-3-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: ucsi: Fix NULL pointer deref in ucsi_connector_change()Hans de Goede
When ucsi_init() fails, ucsi->connector is NULL, yet in case of ucsi_acpi we may still get events which cause the ucs_acpi code to call ucsi_connector_change(), which then derefs the NULL ucsi->connector pointer. Fix this by not setting ucsi->ntfy inside ucsi_init() until ucsi_init() has succeeded, so that ucsi_connector_change() ignores the events because UCSI_ENABLE_NTFY_CONNECTOR_CHANGE is not set in the ntfy mask. Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217106 Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230308154244.722337-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09drm/ttm: Don't print error message if eviction was interruptedThomas Hellström
Avoid printing an error message if eviction was interrupted by, for example, the user pressing CTRL-C. That may happen if eviction is waiting for something, like for example a free batch-buffer. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230307144621.10748-6-thomas.hellstrom@linux.intel.com
2023-03-09drm/ttm: Unexport ttm_global_swapout()Thomas Hellström
Unexport ttm_global_swapout() since it is not used outside of TTM. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230307144621.10748-5-thomas.hellstrom@linux.intel.com
2023-03-09Merge branch '100GbE' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-07 (ice) This series contains updates to ice driver only. Dave removes masking from pfcena field as it was incorrectly preventing valid traffic classes from being enabled. Michal resolves various smatch issues such as not propagating error codes and returning 0 explicitly. Arnd Bergmann resolves gcc-9 warning for integer overflow. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation ==================== Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-09staging: r8188eu: delete driverGreg Kroah-Hartman
Now that the same hardware that the r8188eu driver supported is supported by the real wireless driver rtl8xxxu, the r8188eu driver can be deleted. Also the rtl8xxxu driver supports way more devices, and is a fraction of the overall size, making this a much better overall solution. Thanks to the r8188eu developers and maintainers and reviewers over the years, your work allowed Linux users to use their hardware before the real driver was implemented properly. Reported-by: Hans de Goede <hdegoede@redhat.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Larry Finger <LarryFinger@lwfinger.net> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Martin Kaiser <martin@kaiser.cx> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Acked-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20230308131934.380395-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08eth: fealnx: bring back this old driverJakub Kicinski
This reverts commit d5e2d038dbece821f1af57acbeded3aa9a1832c1. We have a report of this chip being used on a SURECOM EP-320X-S 100/10M Ethernet PCI Adapter which could still have been purchased in some parts of the world 3 years ago. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217151 Fixes: d5e2d038dbec ("eth: fealnx: delete the driver for Myson MTD-800") Link: https://lore.kernel.org/r/20230307171930.4008454-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoCVladimir Oltean
The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5 receives corrupted frames, unless port 6 (attached to GMAC0) has been brought up by the driver. This is true regardless of whether port 5 is used as a user port or as a CPU port (carrying DSA tags). Offline debugging (blind for me) which began in the linked thread showed experimentally that the configuration done by the driver for port 6 contains a step which is needed by port 5 as well - the write to CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from the comment "Set core clock into 500Mhz"). Prints put by Arınç show that the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) | RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both values of the register, while on the MT7621 SoC it cannot. The call path that triggers the register write is: mt753x_phylink_mac_config() for port 6 -> mt753x_pad_setup() -> mt7530_pad_clk_setup() so this fully explains the behavior noticed by Arınç, that bringing port 6 up is necessary. The simplest fix for the problem is to extract the register writes which are needed for both port 5 and 6 into a common mt7530_pll_setup() function, which is called at mt7530_setup() time, immediately after switch reset. We can argue that this mirrors the code layout introduced in mt7531_setup() by commit 42bc4fafe359 ("net: mt7531: only do PLL once after the reset"), in that the PLL setup has the exact same positioning, and further work to consolidate the separate setup() functions is not hindered. Testing confirms that: - the slight reordering of writes to MT7530_P6ECR and to CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not appear to cause problems for the operation of port 6 on MT7621 and on MT7623 (where port 5 also always worked) - packets sent through port 5 are not corrupted anymore, regardless of whether port 6 is enabled by phylink or not (or even present in the device tree) My algorithm for determining the Fixes: tag is as follows. Testing shows that some logic from mt7530_pad_clk_setup() is needed even for port 5. Prior to commit ca366d6c889b ("net: dsa: mt7530: Convert to PHYLINK API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so port 5 included. That commit replaced it with a temporary "Port 5 is not supported!" comment, and the following commit 38f790a80560 ("net: dsa: mt7530: Add support for port 5") replaced that comment with a configuration procedure in mt7530_setup_port5() which was insufficient for port 5 to work. I'm laying the blame on the patch that claimed support for port 5, although one would have also needed the change from commit c3b8e07909db ("net: dsa: mt7530: setup core clock even in TRGMII mode") for the write to be performed completely independently from port 6's configuration. Thanks go to Arınç for describing the problem, for debugging and for testing. Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/netdev/f297c2c4-6e7c-57ac-2394-f6025d309b9d@arinc9.com/ Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230307155411.868573-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-09drm/rockchip: vop2: add polarity flags to RGB outputGerald Loacker
Use h/v-sync and pixel clock polarity flags for RGB output. For all other outputs this is already implemented. Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230302123949.957998-1-gerald.loacker@wolfvision.net
2023-03-09drm/rockchip: vop2: use struct_size() in vop2_bindJacob Keller
Use the overflow-protected struct_size() helper macro to compute the allocation size of the vop2 data structure. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: Heiko Stübner <heiko@sntech.de> Cc: David Airlie <airlied@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230223013533.1707706-1-jacob.e.keller@intel.com
2023-03-09drm/rockchip: dw_hdmi: discard modes with unachievable pixelclocksSascha Hauer
The Rockchip PLL drivers are currently table based and support only the most common pixelclocks. Discard all modes we cannot achieve at all. Normally the desired pixelclocks have an exact match in the PLL driver, nevertheless allow for a 0.1% error just in case. Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Tested-by: Dan Johansen <strit@manjaro.org> Link: https://lore.kernel.org/r/20230118132213.2911418-4-s.hauer@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230216102447.582905-5-s.hauer@pengutronix.de
2023-03-09drm/rockchip: dw_hdmi: Add support for 4k@30 resolutionSascha Hauer
This adds the PLL/phy settings to support higher resolutions like 4k@30. The values were taken from the Rockchip downstream Kernel. Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220926080435.259617-3-s.hauer@pengutronix.de Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Tested-by: Dan Johansen <strit@manjaro.org> Link: https://lore.kernel.org/r/20230118132213.2911418-3-s.hauer@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230216102447.582905-4-s.hauer@pengutronix.de
2023-03-09drm/rockchip: dw_hdmi: relax mode_valid hookSascha Hauer
The driver checks if the pixel clock of the given mode matches an entry in the mpll config table. At least for the Synopsys phy the frequencies in the mpll table are meant as a frequency range up to which the entry works, not as a frequency that must match the pixel clock. Return MODE_OK when the pixelclock is smaller than one of the mpll frequencies to allow for more display resolutions. Limit this behaviour to the Synopsys phy at the moment and keep the current behaviour of forcing exact pixelclock rates for the other phys until it has been sorted out how and if the vendor specific phys work with non standard clock rates. Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220926080435.259617-2-s.hauer@pengutronix.de Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Tested-by: Dan Johansen <strit@manjaro.org> Link: https://lore.kernel.org/r/20230118132213.2911418-2-s.hauer@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230216102447.582905-3-s.hauer@pengutronix.de
2023-03-09drm/rockchip: vop: limit maximum resolution to hardware capabilitiesSascha Hauer
The different VOP variants support different maximum resolutions. Reject resolutions that are not supported by a specific variant. This hasn't been a problem in the upstream driver so far as 1920x1080 has been the maximum resolution supported by the HDMI driver and that resolution is supported by all VOP variants. Now with higher resolutions supported in the HDMI driver we have to limit the resolutions to the ones supported by the VOP. The actual maximum resolutions are taken from the Rockchip downstream Kernel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [dropped the vdisplay > height check after talking to Sascha, as according to the vendor code "Actually vop hardware has no output height limit" (from vendor commit "drm/rockchip: vop: get rid of max_output.height check") and the height-check broke the px30-minievb display] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230216102447.582905-2-s.hauer@pengutronix.de
2023-03-08Merge tag 'platform-drivers-x86-v6.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "A small set of assorted bug and build/warning fixes" * tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform: mellanox: mlx-platform: Initialize shift variable to 0 platform/x86: int3472: Add GPIOs to Surface Go 3 Board data platform/x86: ISST: Fix kernel documentation warnings platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it platform: mellanox: select REGMAP instead of depending on it platform/x86/intel/tpmi: Fix double free reported by Smatch platform/x86: ISST: Increase range of valid mail box commands platform/x86: dell-ddv: Fix temperature scaling platform/x86: dell-ddv: Fix cache invalidation on resume platform/x86/amd: pmc: remove CONFIG_SUSPEND checks
2023-03-08drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer neededRandy Dunlap
DRM_MSM no longer needs DEVFREQ_GOV_SIMPLE_ONDEMAND (since commit dbd7a2a941b8 ("PM / devfreq: Fix build issues with devfreq disabled") in linux-next), so remove that select from the DRM_MSM Kconfig file. Fixes: 6563f60f14cb ("drm/msm/gpu: Add devfreq tuning debugfs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/523353/ Link: https://lore.kernel.org/r/20230220010428.16910-1-rdunlap@infradead.org [rob: tweak commit message to make checkpatch.pl happy] Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-03-08drm/amd/display: remove unused variable availableTom Rix
With gcc and W=1, there is this error drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:297:13: error: variable ‘available’ set but not used [-Werror=unused-but-set-variable] 297 | int available = 0; | ^~~~~~~~~ Since available is unused, remove it. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drm/amd/display: remove unused variable res_poolTom Rix
With gcc and W=1, there is this error drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_mst_types.c:1214:31: error: variable ‘res_pool’ set but not used [-Werror=unused-but-set-variable] 1214 | struct resource_pool *res_pool; | ^~~~~~~~ Since res_pool is unused, remove it. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drm/amdgpu: Drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drm/amd/display: add prefix to amdgpu_dm_crtc.h functionsDavid Tadokoro
Some amdgpu_dm_crtc.h functions didn't have names that indicated where they were declared. To better filter results in debug tools like ftrace, prefix these functions with 'amdgpu_dm_crtc_'. Signed-off-by: David Tadokoro <davidbtadokoro@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08Revert "drm/amd/display: Pass proper parent for DM backlight device ↵Alex Deucher
registration" This reverts commit d24b77e444bef83155557ebf4c2b3c551f198926. This does not work as expected. Bug: https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/issues/730 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4Veerabadhran Gopalakrishnan
Added the video capability query support for VCN version 4_0_4 Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drm/amd/display: remove legacy fields of dc_plane_cap structDavid Tadokoro
The fields blends_with_above and blends_with_below of struct dc_plane_cap (defined in dc/dc.h) are boolean and set to true by default. All instances of a dc_plane_cap maintain the default values of both. Also, there is only one if statement that checks those fields and there would be the same effect if it was deleted (assuming that those fields are always going to be true). For this reason, considering both fields as legacy ones, this commit removes them and the aforementioned if statement. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: David Tadokoro <davidbtadokoro@usp.br> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08Revert "drm/amdgpu/display: change pipe policy for DCN 2.1"Alex Deucher
This reverts commit fa458eb10dc7218146a84e6d2e072424e64d188a. The issue is no longer present even with this commit present as verified by the original reporter. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1849#note_1759599 Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
2023-03-08amdgpu: Avoid building on UMLPeter Foley
The amdgpu driver tries to use fields not supported by UML's cpuinfo struct. Disable the driver when targeting UML to avoid tripping up allyesconfig. e.g. ../drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_hwmgr.c: In function ‘intel_core_rkl_chk’: ../drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_hwmgr.c:1742:33: error: initialization of ‘struct cpuinfo_x86 *’ from incompatible pointer type ‘struct cpuinfo_um *’ [-Werror=incompatible-pointer-types ] ../drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c: In function ‘kfd_cpumask_to_apic_id’: ../drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:2157:48: error: ‘struct cpuinfo_um’ has no member named ‘apicid’ Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Peter Foley <pefoley2@pefoley.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drivers/gpu: fix typo in commentHusain Alshehhi
Replace "isntance" with "instance". Signed-off-by: Husain Alshehhi <husain@alshehhi.io> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drm/amd/display: add prefix to amdgpu_dm_plane.h functionsDavid Tadokoro
The amdgpu_dm_plane.h functions didn't have names that indicated where they were declared. To better filter results in debug tools like ftrace, prefix these functions with 'amdgpu_dm_plane_'. Note that we may want to make this same change in other files like amdgpu_dm_crtc.h. Signed-off-by: David Tadokoro <davidbtadokoro@usp.br> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()Hans de Goede
To last 2 parameters to cfg80211_get_bss() should be of the enum ieee80211_bss_type resp. enum ieee80211_privacy types, which WLAN_CAPABILITY_ESS very much is not. Fix both cfg80211_get_bss() calls in ioctl_cfg80211.c to pass the right parameters. Note that the second call was already somewhat fixed by commenting out WLAN_CAPABILITY_ESS and passing in 0 instead. This was still not entirely correct though since that would limit returned BSS-es to ESS type BSS-es with privacy on. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230306153512.162104-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08staging: rtl8723bs: Fix key-store index handlingHans de Goede
There are 2 issues with the key-store index handling 1. The non WEP key stores can store keys with indexes 0 - BIP_MAX_KEYID, this means that they should be an array with BIP_MAX_KEYID + 1 entries. But some of the arrays where just BIP_MAX_KEYID entries big. While one other array was hardcoded to a size of 6 entries, instead of using the BIP_MAX_KEYID define. 2. The rtw_cfg80211_set_encryption() and wpa_set_encryption() functions index check where checking that the passed in key-index would fit inside both the WEP key store (which only has 4 entries) as well as in the non WEP key stores. This breaks any attempts to set non WEP keys with index 4 or 5. Issue 2. specifically breaks wifi connection with some access points which advertise PMF support. Without this fix connecting to these access points fails with the following wpa_supplicant messages: nl80211: kernel reports: key addition failed wlan0: WPA: Failed to configure IGTK to the driver wlan0: RSN: Failed to configure IGTK wlan0: CTRL-EVENT-DISCONNECTED bssid=... reason=1 locally_generated=1 Fix 1. by using the right size for the key-stores. After this 2. can safely be fixed by checking the right max-index value depending on the used algorithm, fixing wifi not working with some PMF capable APs. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230306153512.162104-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08staging: rtl8192e: Remove call_usermodehelper starting RadioPower.shPhilipp Hortmann
Remove call_usermodehelper starting /etc/acpi/events/RadioPower.sh that is not available. This script is not part of the kernel and it is not officially available on the www. The result is that this lines are just dead code. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230301215441.GA14049@matrix-ESPRIMO-P710 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a scriptPhilipp Hortmann
Remove function _rtl92e_dm_check_ac_dc_power calling a script /etc/acpi/wireless-rtl-ac-dc-power.sh that is not available. This script is not part of the kernel and it is not available on the www. The result is that this function is just dead code. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230228202857.GA16442@matrix-ESPRIMO-P710 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08firmware: arm_scmi: Use the bitmap API to allocate bitmapsChristophe JAILLET
Use devm_bitmap_zalloc() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/c073b1607ada34d5bde6ce1009179cf15bbf0da3.1657308593.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-03-08firmware: arm_scmi: Fix device node validation for mailbox transportCristian Marussi
When mailboxes are used as a transport it is possible to setup the SCMI transport layer, depending on the underlying channels configuration, to use one or two mailboxes, associated, respectively, to one or two, distinct, shared memory areas: any other combination should be treated as invalid. Add more strict checking of SCMI mailbox transport device node descriptors. Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type") Cc: <stable@vger.kernel.org> # 4.19 Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20230307162324.891866-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-03-08net: microchip: sparx5: fix deletion of existing DSCP mappingsDaniel Machon
Fix deletion of existing DSCP mappings in the APP table. Adding and deleting DSCP entries are replicated per-port, since the mapping table is global for all ports in the chip. Whenever a mapping for a DSCP value already exists, the old mapping is deleted first. However, it is only deleted for the specified port. Fix this by calling sparx5_dcb_ieee_delapp() instead of dcb_ieee_delapp() as it ought to be. Reproduce: // Map and remap DSCP value 63 $ dcb app add dev eth0 dscp-prio 63:1 $ dcb app add dev eth0 dscp-prio 63:2 $ dcb app show dev eth0 dscp-prio dscp-prio 63:2 $ dcb app show dev eth1 dscp-prio dscp-prio 63:1 63:2 <-- 63:1 should not be there Fixes: 8dcf69a64118 ("net: microchip: sparx5: add support for offloading dscp table") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-08octeontx2-af: Unlock contexts in the queue context cache in case of fault ↵Suman Ghosh
detection NDC caches contexts of frequently used queue's (Rx and Tx queues) contexts. Due to a HW errata when NDC detects fault/poision while accessing contexts it could go into an illegal state where a cache line could get locked forever. To makesure all cache lines in NDC are available for optimum performance upon fault/lockerror/posion errors scan through all cache lines in NDC and clear the lock bit. Fixes: 4a3581cd5995 ("octeontx2-af: NPA AQ instruction enqueue support") Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-07scsi: mpi3mr: Fix expander node leak in mpi3mr_remove()Tomas Henzl
Add a missing resource clean up in .remove. Fixes: e22bae30667a ("scsi: mpi3mr: Add expander devices to STL") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-7-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: mpi3mr: Fix memory leaks in mpi3mr_init_ioc()Tomas Henzl
Don't allocate memory again when IOC is being reinitialized. Fixes: fe6db6151565 ("scsi: mpi3mr: Handle offline FW activation in graceful manner") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-6-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: mpi3mr: Fix sas_hba.phy memory leak in mpi3mr_remove()Tomas Henzl
Free mrioc->sas_hba.phy at .remove. Fixes: 42fc9fee116f ("scsi: mpi3mr: Add helper functions to manage device's port") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-5-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: mpi3mr: Fix mpi3mr_hba_port memory leak in mpi3mr_remove()Tomas Henzl
Free mpi3mr_hba_port at .remove. Fixes: 42fc9fee116f ("scsi: mpi3mr: Add helper functions to manage device's port") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-4-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: mpi3mr: Fix config page DMA memory leakTomas Henzl
A fix for: DMA-API: pci 0000:83:00.0: device driver has pending DMA allocations while released from device [count=1] Fixes: 32d457d5a2af ("scsi: mpi3mr: Add framework to issue config requests") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-3-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: mpi3mr: Fix throttle_groups memory leakTomas Henzl
Add a missing kfree(). Fixes: f10af057325c ("scsi: mpi3mr: Resource Based Metering") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-2-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-15 13:28:59 +0000