summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-03-24Merge branch 'thermal-acpi'Rafael J. Wysocki
Merge a fix for a recent thermal-related regression in the ACPI processor driver. * thermal-acpi: ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes thermal: core: Introduce thermal_cooling_device_update() thermal: core: Introduce thermal_cooling_device_present() ACPI: processor: Reorder acpi_processor_driver_init()
2023-03-24Merge branch 'acpi-video'Rafael J. Wysocki
Merge an ACPI backlight quirk for Acer Aspire 3830TG (Hans de Goede). * acpi-video: ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG
2023-03-24ACPI: resource: Add Medion S17413 to IRQ override quirkAymeric Wibo
Add DMI info of the Medion S17413 (board M1xA) to the IRQ override quirk table. This fixes the keyboard not working on these laptops. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213031 Signed-off-by: Aymeric Wibo <obiwac@gmail.com> [ rjw: Fixed up white space ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-24Merge tag 'tag-chrome-platform-fixes-for-v6.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fix from Tzung-Bi Shih: "Fix a kernel data leak vulnerability" * tag 'tag-chrome-platform-fixes-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl
2023-03-24Merge tag 'i2c-for-6.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A set of regular driver fixes" * tag 'i2c-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer() i2c: hisi: Only use the completion interrupt to finish the transfer i2c: hisi: Avoid redundant interrupts i2c: mxs: ensure that DMA buffers are safe for DMA i2c: imx-lpi2c: check only for enabled interrupt flags i2c: imx-lpi2c: clean rx/tx buffers upon new message
2023-03-24Merge tag 'net-6.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, wifi and bluetooth. Current release - regressions: - wifi: mt76: mt7915: add back 160MHz channel width support for MT7915 - libbpf: revert poisoning of strlcpy, it broke uClibc-ng Current release - new code bugs: - bpf: improve the coverage of the "allow reads from uninit stack" feature to fix verification complexity problems - eth: am65-cpts: reset PPS genf adj settings on enable Previous releases - regressions: - wifi: mac80211: serialize ieee80211_handle_wake_tx_queue() - wifi: mt76: do not run mt76_unregister_device() on unregistered hw, fix null-deref - Bluetooth: btqcomsmd: fix command timeout after setting BD address - eth: igb: revert rtnl_lock() that causes a deadlock - dsa: mscc: ocelot: fix device specific statistics Previous releases - always broken: - xsk: add missing overflow check in xdp_umem_reg() - wifi: mac80211: - fix QoS on mesh interfaces - fix mesh path discovery based on unicast packets - Bluetooth: - ISO: fix timestamped HCI ISO data packet parsing - remove "Power-on" check from Mesh feature - usbnet: more fixes to drivers trusting packet length - wifi: iwlwifi: mvm: fix mvmtxq->stopped handling - Bluetooth: btintel: iterate only bluetooth device ACPI entries - eth: iavf: fix inverted Rx hash condition leading to disabled hash - eth: igc: fix the validation logic for taprio's gate list - dsa: tag_brcm: legacy: fix daisy-chained switches Misc: - bpf: adjust insufficient default bpf_jit_limit to account for growth of BPF use over the last 5 years - xdp: bpf_xdp_metadata() use EOPNOTSUPP as unique errno indicating no driver support" * tag 'net-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) Bluetooth: HCI: Fix global-out-of-bounds Bluetooth: mgmt: Fix MGMT add advmon with RSSI command Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work Bluetooth: L2CAP: Fix responding with wrong PDU type Bluetooth: btqcomsmd: Fix command timeout after setting BD address Bluetooth: btinel: Check ACPI handle for NULL before accessing net: mdio: thunder: Add missing fwnode_handle_put() net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup() net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup() net: asix: fix modprobe "sysfs: cannot create duplicate filename" gve: Cache link_speed value from device tools: ynl: Fix genlmsg header encoding formats net: enetc: fix aggregate RMON counters not showing the ranges Bluetooth: Remove "Power-on" check from Mesh feature Bluetooth: Fix race condition in hci_cmd_sync_clear Bluetooth: btintel: Iterate only bluetooth device ACPI entries Bluetooth: ISO: fix timestamped HCI ISO data packet parsing Bluetooth: btusb: Remove detection of ISO packets over bulk Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet ...
2023-03-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four small fixes, three in drivers. The core fix adds a UFS device to an existing quirk to avoid a huge delay on boot" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate() scsi: qla2xxx: Synchronize the IOCB count to be in order scsi: qla2xxx: Perform lockless command completion in abort path scsi: core: Add BLIST_SKIP_VPD_PAGES for SKhynix H28U74301AMR
2023-03-24HID: hid-sensor-custom: Fix buffer overrun in device nameTodd Brandt
On some platforms there are some platform devices created with invalid names. For example: "HID-SENSOR-INT-020b?.39.auto" instead of "HID-SENSOR-INT-020b.39.auto" This string include some invalid characters, hence it will fail to properly load the driver which will handle this custom sensor. Also it is a problem for some user space tools, which parses the device names from ftrace and dmesg. This is because the string, real_usage, is not NULL terminated and printed with %s to form device name. To address this, initialize the real_usage string with 0s. Reported-and-tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217169 Fixes: 98c062e82451 ("HID: hid-sensor-custom: Allow more custom iio sensors") Cc: stable@vger.kernel.org Suggested-by: Philipp Jungkamp <p.jungkamp@gmx.net> Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net> Signed-off-by: Todd Brandt <todd.e.brandt@intel.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-24accel/ivpu: Fix IPC buffer header status field valueAndrzej Kacprowski
IPC messages transmitted to the device must be marked as allocated - status field must be set to 1. The VPU driver has IVPU_IPC_HDR_ALLOCATED incorrectly defined. Future VPU firmware versions will reject all IPC messages with invalid status and will not work with a VPU driver that is missing this fix. Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages") Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-9-stanislaw.gruszka@linux.intel.com
2023-03-24accel/ivpu: Fix VPU clock calculationStanislaw Gruszka
The driver calculates the wrong frequency because it ignores the workpoint config and this cause undesired power/performance characteristics. Fix this by using the workpoint config in the freq calculations. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-8-stanislaw.gruszka@linux.intel.com
2023-03-24accel/ivpu: Remove support for 1 tile SKUsStanislaw Gruszka
The support for single tile SKUs was dropped from MTL. Note that we can still boot the VPU with 1-tile work point config - this is independent from number of tiles present in the VPU. Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-7-stanislaw.gruszka@linux.intel.com
2023-03-24accel/ivpu: Disable buttress on device removalStanislaw Gruszka
Use pci_set_power_state() to disable buttress when device is removed. This is workaround of hardware bug that hangs the system. Additionally not disabling buttress prevents CPU enter deeper Pkg-C states when the driver is unloaded or fail to probe. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-6-stanislaw.gruszka@linux.intel.com
2023-03-24accel/ivpu: Fix power down sequenceStanislaw Gruszka
Remove FPGA workaround on power_down to skip checking for noc quiescent state. Put VPU in reset before powering it down and skip manipulating registers that are reset by the VPU reset. This fixes power down errors where VPU is powered down just after VPU is booted. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-5-stanislaw.gruszka@linux.intel.com
2023-03-24accel/ivpu: Do not use SSID 1Stanislaw Gruszka
The SSID=1 is used by the firmware as default value in case SSID mapping is not initialized. This allows detecting use of miss-configured memory contexts. The future FW versions may not allow using SSID=1. SSID=65 is valid value, number of contexts are limited by number of available command queues, but SSID can be any u16 value. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-4-stanislaw.gruszka@linux.intel.com
2023-03-24accel/ivpu: Cancel recovery workStanislaw Gruszka
Prevent running recovery_work after device is removed. Fixes: 852be13f3bd3 ("accel/ivpu: Add PM support") Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-3-stanislaw.gruszka@linux.intel.com
2023-03-24accel/ivpu: Do not access HW registers after unbindStanislaw Gruszka
We should not access hardware after we unbind from the bus. Use drm_dev_enter() / drm_dev_exit() to mark code sections where hardware is accessed (and not already protected by other locks) and drm_dev_unplug() to mark device is gone. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323125504.2586442-2-stanislaw.gruszka@linux.intel.com
2023-03-24gpu: host1x: fix uninitialized variable useArnd Bergmann
The error handling for platform_get_irq() failing no longer works after a recent change, clang now points this out with a warning: drivers/gpu/host1x/dev.c:520:6: error: variable 'syncpt_irq' is uninitialized when used here [-Werror,-Wuninitialized] if (syncpt_irq < 0) ^~~~~~~~~~ Fix this by removing the variable and checking the correct error status. Fixes: 625d4ffb438c ("gpu: host1x: Rewrite syncpoint interrupt handling") Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20230127221418.2522612-1-arnd@kernel.org
2023-03-24Merge tag 'amd-drm-fixes-6.3-2023-03-23' of ↵Daniel Vetter
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.3-2023-03-23: amdgpu: - S4 fix - Soft reset fixes - SR-IOV fix - Remove an out of date comment in the DC code - ASPM fix - DCN 3.2 fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323161939.7751-1-alexander.deucher@amd.com
2023-03-24Merge tag 'drm-intel-fixes-2023-03-23' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.3-rc4: - Fix an MTL workaround - Fix fbdev obj locking before vma pin - Fix state inheritance tracking in initial commit - Fix missing GuC error capture codes - Fix missing debug object activation - Fix uc init late order relative to probe error injection - Fix perf limit reasons formatting - Fix vblank timestamp update on seamless M/N changes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/878rfn7njw.fsf@intel.com
2023-03-24Merge tag 'drm-misc-fixes-2023-03-23' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * fixes for bind and probing error handling for meson, lt8912b bridge * panel-orientation fixes for Lenovo Book X90F Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230323082401.GA8371@linux-uq9g
2023-03-24platform/chrome: cros_ec_chardev: fix kernel data leak from ioctlTzung-Bi Shih
It is possible to peep kernel page's data by providing larger `insize` in struct cros_ec_command[1] when invoking EC host commands. Fix it by using zeroed memory. [1]: https://elixir.bootlin.com/linux/v6.2/source/include/linux/platform_data/cros_ec_proto.h#L74 Fixes: eda2e30c6684 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC") Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20230324010658.1082361-1-tzungbi@kernel.org
2023-03-23Input: i8042 - add TUXEDO devices to i8042 quirk tables for partial fixWerner Sembach
A lot of modern Clevo barebones have touchpad and/or keyboard issues after suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them have an external PS/2 port so this can safely be set for all of them. I'm not entirely sure if every device listed really needs all four quirks, but after testing and production use, no negative effects could be observed when setting all four. Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS on the Clevo N150CU and the Clevo NHxxRZQ makes the keyboard very laggy for ~5 seconds after boot and sometimes also after resume. However both are required for the keyboard to not fail completely sometimes after boot or resume. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230321191619.647911-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-23Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-03-23 We've added 8 non-merge commits during the last 13 day(s) which contain a total of 21 files changed, 238 insertions(+), 161 deletions(-). The main changes are: 1) Fix verification issues in some BPF programs due to their stack usage patterns, from Eduard Zingerman. 2) Fix to add missing overflow checks in xdp_umem_reg and return an error in such case, from Kal Conley. 3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia. 4) Fix insufficient bpf_jit_limit default to avoid users running into hard to debug seccomp BPF errors, from Daniel Borkmann. 5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc to make it unambiguous from other errors, from Jesper Dangaard Brouer. 6) Two BPF selftest fixes to address compilation errors from recent changes in kernel structures, from Alexei Starovoitov. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support bpf: Adjust insufficient default bpf_jit_limit xsk: Add missing overflow check in xdp_umem_reg selftests/bpf: Fix progs/test_deny_namespace.c issues. selftests/bpf: Fix progs/find_vma_fail1.c build error. libbpf: Revert poisoning of strlcpy selftests/bpf: Tests for uninitialized stack reads bpf: Allow reads from uninit stack ==================== Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23Merge tag 'for-net-2023-03-23' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix MGMT add advmon with RSSI command - L2CAP: Fix responding with wrong PDU type - Fix race condition in hci_cmd_sync_clear - ISO: Fix timestamped HCI ISO data packet parsing - HCI: Fix global-out-of-bounds - hci_sync: Resume adv with no RPA when active scan * tag 'for-net-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: HCI: Fix global-out-of-bounds Bluetooth: mgmt: Fix MGMT add advmon with RSSI command Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work Bluetooth: L2CAP: Fix responding with wrong PDU type Bluetooth: btqcomsmd: Fix command timeout after setting BD address Bluetooth: btinel: Check ACPI handle for NULL before accessing Bluetooth: Remove "Power-on" check from Mesh feature Bluetooth: Fix race condition in hci_cmd_sync_clear Bluetooth: btintel: Iterate only bluetooth device ACPI entries Bluetooth: ISO: fix timestamped HCI ISO data packet parsing Bluetooth: btusb: Remove detection of ISO packets over bulk Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet Bluetooth: hci_sync: Resume adv with no RPA when active scan ==================== Link: https://lore.kernel.org/r/20230323202335.3380841-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23Merge tag 'wireless-2023-03-23' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.3 Third set of fixes for v6.3. mt76 has two kernel crash fixes and adding back 160 MHz channel support for mt7915. mac80211 has fixes for a race in transmit path and two mesh related fixes. iwlwifi also has fixes for races. * tag 'wireless-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix mesh path discovery based on unicast packets wifi: mac80211: fix qos on mesh interfaces wifi: iwlwifi: mvm: protect TXQ list manipulation wifi: iwlwifi: mvm: fix mvmtxq->stopped handling wifi: mac80211: Serialize ieee80211_handle_wake_tx_queue() wifi: mwifiex: mark OF related data as maybe unused wifi: mt76: connac: do not check WED status for non-mmio devices wifi: mt76: mt7915: add back 160MHz channel width support for MT7915 wifi: mt76: do not run mt76_unregister_device() on unregistered hw ==================== Link: https://lore.kernel.org/r/20230323110332.C4FE4C433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished ↵Zheng Wang
work In btsdio_probe, &data->work was bound with btsdio_work.In btsdio_send_frame, it was started by schedule_work. If we call btsdio_remove with an unfinished job, there may be a race condition and cause UAF bug on hdev. Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23Bluetooth: btqcomsmd: Fix command timeout after setting BD addressStephan Gerhold
On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs) the Bluetooth firmware seems to become unresponsive for a while after setting the BD address. On recent kernel versions (at least 5.17+) this often causes timeouts for subsequent commands, e.g. the HCI reset sent by the Bluetooth core during initialization: Bluetooth: hci0: Opcode 0x c03 failed: -110 Unfortunately this behavior does not seem to be documented anywhere. Experimentation suggests that the minimum necessary delay to avoid the problem is ~150us. However, to be sure add a sleep for > 1ms in case it is a bit longer on other firmware versions. Older kernel versions are likely also affected, although perhaps with slightly different errors or less probability. Side effects can easily hide the issue in most cases, e.g. unrelated incoming interrupts that cause the necessary delay. Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23Bluetooth: btinel: Check ACPI handle for NULL before accessingKiran K
Older platforms and Virtual platforms which doesn't have support for bluetooth device in ACPI firmware will not have valid ACPI handle. Check for validity of handle before accessing. dmesg log from simics environment (virtual platform): BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: acpi_ns_walk_namespace+0x5c/0x278 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: bnep intel_powerclamp coretemp kvm_intel kvm irqbypass intel_cstate input_leds joydev serio_raw mac_hid btusb(OE) btintel(OE) bluetooth(OE) lpc_ich compat(OE) ecdh_generic i7core_edac i5500_temp shpchp binfmt_misc sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid e1000e psmouse ahci pata_acpi libahci ptp pps_core floppy CPU: 0 PID: 35 Comm: kworker/u3:0 Tainted: G OE 4.15.0-140-generic #144-Ubuntu Hardware name: Simics Simics, BIOS Simics 01/01/2011 Workqueue: hci0 hci_power_on [bluetooth] RIP: 0010:acpi_ns_walk_namespace+0x5c/0x278 RSP: 0000:ffffaa9c0049bba8 EFLAGS: 00010246 RAX: 0000000000000001 RBX: 0000000000001001 RCX: 0000000000000010 RDX: ffffffff92ea7e27 RSI: ffffffff92ea7e10 RDI: 00000000000000c8 RBP: ffffaa9c0049bbf8 R08: 0000000000000000 R09: ffffffffc05b39d0 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000000 R14: ffffffffc05b39d0 R15: ffffaa9c0049bc70 FS: 0000000000000000(0000) GS:ffff8be73fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000075f0e000 CR4: 00000000000006f0 Fixes: 294d749b5df5 ("Bluetooth: btintel: Iterate only bluetooth device ACPI entries") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23usb: dwc2: fix a race, don't power off/on phy for dual-role modeFabrice Gasnier
When in dual role mode (dr_mode == USB_DR_MODE_OTG), platform probe successively basically calls: - dwc2_gadget_init() - dwc2_hcd_init() - dwc2_lowlevel_hw_disable() since recent change [1] - usb_add_gadget_udc() The PHYs (and so the clocks it may provide) shouldn't be disabled for all SoCs, in OTG mode, as the HCD part has been initialized. On STM32 this creates some weird race condition upon boot, when: - initially attached as a device, to a HOST - and there is a gadget script invoked to setup the device part. Below issue becomes systematic, as long as the gadget script isn't started by userland: the hardware PHYs (and so the clocks provided by the PHYs) remains disabled. It ends up in having an endless interrupt storm, before the watchdog resets the platform. [ 16.924163] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM [ 16.962704] dwc2 49000000.usb-otg: DWC OTG Controller [ 16.966488] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 2 [ 16.974051] dwc2 49000000.usb-otg: irq 77, io mem 0x49000000 [ 17.032170] hub 2-0:1.0: USB hub found [ 17.042299] hub 2-0:1.0: 1 port detected [ 17.175408] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode [ 17.181741] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode [ 17.189303] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode ... The host part is also not functional, until the gadget part is configured. The HW may only be disabled for peripheral mode (original init), e.g. dr_mode == USB_DR_MODE_PERIPHERAL, until the gadget driver initializes. But when in USB_DR_MODE_OTG, the HW should remain enabled, as the HCD part is able to run, while the gadget part isn't necessarily configured. I don't fully get the of purpose the original change, that claims disabling the hardware is missing. It creates conditions on SOCs using the PHY initialization to be completely non working in OTG mode. Original change [1] should be reworked to be platform specific. [1] https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com Fixes: ade23d7b7ec5 ("usb: dwc2: power on/off phy for peripheral mode in dual-role mode") Cc: stable <stable@kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Tested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20230315144433.3095859-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23usb: dwc2: fix a devres leak in hw_enable upon suspend resumeFabrice Gasnier
Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable(). "ll_hw_enabled" should achieve the same (and is used currently in the remove() routine). Fixes: 54c196060510 ("usb: dwc2: Always disable regulators on driver teardown") Fixes: 33a06f1300a7 ("usb: dwc2: Fix error path in gadget registration") Cc: stable <stable@kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20230316084127.126084-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23usb: chipidea: core: fix possible concurrent when switch roleXu Yang
The user may call role_store() when driver is handling ci_handle_id_switch() which is triggerred by otg event or power lost event. Unfortunately, the controller may go into chaos in this case. Fix this by protecting it with mutex lock. Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230317061516.2451728-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23usb: chipdea: core: fix return -EINVAL if request role is the same with ↵Xu Yang
current role It should not return -EINVAL if the request role is the same with current role, return non-error and without do anything instead. Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230317061516.2451728-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23efi/libstub: randomalloc: Return EFI_OUT_OF_RESOURCES on failureArd Biesheuvel
The logic in efi_random_alloc() will iterate over the memory map twice, once to count the number of candidate slots, and another time to locate the chosen slot after randomization. If there is insufficient memory to do the allocation, the second loop will run to completion without actually having located a slot, but we currently return EFI_SUCCESS in this case, as we fail to initialize status to the appropriate error value of EFI_OUT_OF_RESOURCES. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-03-23pwm: Zero-initialize the pwm_state passed to driver's .get_state()Uwe Kleine-König
This is just to ensure that .usage_power is properly initialized and doesn't contain random stack data. The other members of struct pwm_state should get a value assigned in a successful call to .get_state(). So in the absence of bugs in driver implementations, this is only a safe-guard and no fix. Reported-by: Munehisa Kamata <kamatam@amazon.com> Link: https://lore.kernel.org/r/20230310214004.2619480-1-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-03-23pwm: meson: Explicitly set .polarity in .get_state()Uwe Kleine-König
The driver only supports normal polarity. Complete the implementation of .get_state() by setting .polarity accordingly. This fixes a regression that was possible since commit c73a3107624d ("pwm: Handle .get_state() failures") which stopped to zero-initialize the state passed to the .get_state() callback. This was reported at https://forum.odroid.com/viewtopic.php?f=177&t=46360 . While this was an unintended side effect, the real issue is the driver's callback not setting the polarity. There is a complicating fact, that the .apply() callback fakes support for inversed polarity. This is not (and cannot) be matched by .get_state(). As fixing this isn't easy, only point it out in a comment to prevent authors of other drivers from copying that approach. Fixes: c375bcbaabdb ("pwm: meson: Read the full hardware state in meson_pwm_get_state()") Reported-by: Munehisa Kamata <kamatam@amazon.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230310191405.2606296-1-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-03-23pwm: sprd: Explicitly set .polarity in .get_state()Uwe Kleine-König
The driver only supports normal polarity. Complete the implementation of .get_state() by setting .polarity accordingly. Fixes: 8aae4b02e8a6 ("pwm: sprd: Add Spreadtrum PWM support") Link: https://lore.kernel.org/r/20230228135508.1798428-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-03-23pwm: iqs620a: Explicitly set .polarity in .get_state()Uwe Kleine-König
The driver only supports normal polarity. Complete the implementation of .get_state() by setting .polarity accordingly. Fixes: 6f0841a8197b ("pwm: Add support for Azoteq IQS620A PWM generator") Reviewed-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20230228135508.1798428-4-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-03-23pwm: cros-ec: Explicitly set .polarity in .get_state()Uwe Kleine-König
The driver only supports normal polarity. Complete the implementation of .get_state() by setting .polarity accordingly. Reviewed-by: Guenter Roeck <groeck@chromium.org> Fixes: 1f0d3bb02785 ("pwm: Add ChromeOS EC PWM driver") Link: https://lore.kernel.org/r/20230228135508.1798428-3-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-03-23pwm: hibvt: Explicitly set .polarity in .get_state()Uwe Kleine-König
The driver only both polarities. Complete the implementation of .get_state() by setting .polarity according to the configured hardware state. Fixes: d09f00810850 ("pwm: Add PWM driver for HiSilicon BVT SOCs") Link: https://lore.kernel.org/r/20230228135508.1798428-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-03-23drm/amd/display: Set dcn32 caps.seamless_odmHersen Wu
[Why & How] seamless_odm set was not picked up while merging commit 2d017189e2b3 ("drm/amd/display: Blank eDP on enable drv if odm enabled") Fixes: 2d017189e2b3 ("drm/amd/display: Blank eDP on enable drv if odm enabled") Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-23drm/amd/display: fix wrong index used in dccg32_set_dpstreamclkHersen Wu
[Why & How] When merging commit 9af611f29034 ("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming"), index change was not picked up. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Fixes: 9af611f29034 ("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming") Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-23drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD NaviKai-Heng Feng
S2idle resume freeze can be observed on Intel ADL + AMD WX5500. This is caused by commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default"). The root cause is still not clear for now. So extend and apply the ASPM quirk from commit e02fe3bc7aba ("drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems"), to workaround the issue on Navi cards too. Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2458 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-03-23drm/amd/display: remove outdated 8bpc commentsAlex Hung
[Why] The commit c76e483cd916 ("drm/amd/display: Don't restrict bpc to 8 bpc") removes the historical 8bpc dependency and sets max_bpc to 16. [How] The comment that states "8bpc for non-edp" needs to be removed as well. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-23drm/amdgpu/gfx: set cg flags to enter/exit safe modeJane Jian
sriov needs to enter/exit safe mode in update umd p state add the cg flag to let it enter or exit while needed Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-23drm/amdgpu: Force signal hw_fences that are embedded in non-sched jobsYuBiao Wang
[Why] For engines not supporting soft reset, i.e. VCN, there will be a failed ib test before mode 1 reset during asic reset. The fences in this case are never signaled and next time when we try to free the sa_bo, kernel will hang. [How] During pre_asic_reset, driver will clear job fences and afterwards the fences' refcount will be reduced to 1. For drm_sched_jobs it will be released in job_free_cb, and for non-sched jobs like ib_test, it's meant to be released in sa_bo_free but only when the fences are signaled. So we have to force signal the non_sched bad job's fence during pre_asic_reset or the clear is not complete. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-23drm/amdgpu: add mes resume when do gfx post soft resetTong Liu01
[why] when gfx do soft reset, mes will also do reset, if mes is not resumed when do recover from soft reset, mes is unable to respond in later sequence [how] resume mes when do gfx post soft reset Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-23drm/amdgpu: skip ASIC reset for APUs when go to S4Tim Huang
For GC IP v11.0.4/11, PSP TMR need to be reserved for ASIC mode2 reset. But for S4, when psp suspend, it will destroy the TMR that fails the ASIC reset. [ 96.006101] amdgpu 0000:62:00.0: amdgpu: MODE2 reset [ 100.409717] amdgpu 0000:62:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000011 SMN_C2PMSG_82:0x00000002 [ 100.411593] amdgpu 0000:62:00.0: amdgpu: Mode2 reset failed! [ 100.412470] amdgpu 0000:62:00.0: PM: pci_pm_freeze(): amdgpu_pmops_freeze+0x0/0x50 [amdgpu] returns -62 [ 100.414020] amdgpu 0000:62:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xd0 returns -62 [ 100.415311] amdgpu 0000:62:00.0: PM: pci_pm_freeze+0x0/0xd0 returned -62 after 4623202 usecs [ 100.416608] amdgpu 0000:62:00.0: PM: failed to freeze async: error -62 We can skip the reset on APUs, assuming we can resume them properly. Verified on some GFX11, GFX10 and old GFX9 APUs. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-03-23drm/amdgpu: reposition the gpu reset checking for reuseTim Huang
Move the amdgpu_acpi_should_gpu_reset out of CONFIG_SUSPEND to share it with hibernate case. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-03-23efi/libstub: Use relocated version of kernel's struct screen_infoArd Biesheuvel
In some cases, we expose the kernel's struct screen_info to the EFI stub directly, so it gets populated before even entering the kernel. This means the early console is available as soon as the early param parsing happens, which is nice. It also means we need two different ways to pass this information, as this trick only works if the EFI stub is baked into the core kernel image, which is not always the case. Huacai reports that the preparatory refactoring that was needed to implement this alternative method for zboot resulted in a non-functional efifb earlycon for other cases as well, due to the reordering of the kernel image relocation with the population of the screen_info struct, and the latter now takes place after copying the image to its new location, which means we copy the old, uninitialized state. So let's ensure that the same-image version of alloc_screen_info() produces the correct screen_info pointer, by taking the displacement of the loaded image into account. Reported-by: Huacai Chen <chenhuacai@loongson.cn> Tested-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/linux-efi/20230310021749.921041-1-chenhuacai@loongson.cn/ Fixes: 42c8ea3dca094ab8 ("efi: libstub: Factor out EFI stub entrypoint into separate file") Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-03-23net: mdio: thunder: Add missing fwnode_handle_put()Liang He
In device_for_each_child_node(), we should add fwnode_handle_put() when break out of the iteration device_for_each_child_node() as it will automatically increase and decrease the refcounter. Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 23:27:40 +0000