summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-06-23scsi: qla2xxx: Set NVMe status code for failed NVMe FCP requestDaniel Wagner
The qla2xxx driver knows when request was processed successfully or not. But it always sets the NVMe status code to 0/NVME_SC_SUCCESS. The upper layer needs to figure out from the rcv_rsplen and transferred_length variables if the request was transferred successfully. This is not always possible, e.g. when the request data length is 0, the transferred_length is also set 0 which is interpreted as success in nvme_fc_fcpio_done(). Let's inform the upper layer (nvme_fc_fcpio_done()) when something went wrong. nvme_fc_fcpio_done() maps all non-NVME_SC_SUCCESS status codes to NVME_SC_HOST_PATH_ERROR. There isn't any benefit to map the QLA status code to the NVMe status code. Therefore, use NVME_SC_INTERNAL to indicate an error which aligns it with the lpfc driver. Link: https://lore.kernel.org/r/20200604100745.89250-1-dwagner@suse.de Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-23bnxt_en: Read VPD info only for PFsVasundhara Volam
Virtual functions does not have VPD information. This patch modifies calling bnxt_read_vpd_info() only for PFs and avoids an unnecessary error log. Fixes: a0d0fd70fed5 ("bnxt_en: Read partno and serialno of the board from VPD") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23bnxt_en: Fix statistics counters issue during ifdown with older firmware.Michael Chan
On older firmware, the hardware statistics are not cleared when the driver frees the hardware stats contexts during ifdown. The driver expects these stats to be cleared and saves a copy before freeing the stats contexts. During the next ifup, the driver will likely allocate the same hardware stats contexts and this will cause a big increase in the counters as the old counters are added back to the saved counters. We fix it by making an additional firmware call to clear the counters before freeing the hw stats contexts when the firmware is the older 20.x firmware. Fixes: b8875ca356f1 ("bnxt_en: Save ring statistics before reset.") Reported-by: Jakub Kicinski <kicinski@fb.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Jakub Kicinski <kicinski@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23bnxt_en: Do not enable legacy TX push on older firmware.Michael Chan
Older firmware may not support legacy TX push properly and may not be disabling it. So we check certain firmware versions that may have this problem and disable legacy TX push unconditionally. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23bnxt_en: Store the running firmware version code.Michael Chan
We currently only store the firmware version as a string for ethtool and devlink info. Store it also as a version code. The next 2 patches will need to check the firmware major version to determine some workarounds. We also use the 16-bit firmware version fields if the firmware is newer and provides the 16-bit fields. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4vf: update kernel-doc line commentsRahul Lakkireddy
Update several kernel-doc line comments to fix warnings reported by make W=1. Fixes following class of warnings reported by make W=1 in several places: cxgb4vf_main.c:275: warning: Function parameter or member 'persistent' not described in 'cxgb4vf_change_mac' cxgb4vf_main.c:275: warning: Excess function parameter 'persist' description in 'cxgb4vf_change_mac' Fixes: 16f8bd4be754 ("cxgb4vf: Add core T4 PCI-E SR-IOV Virtual Function hardware definitions and device communication code") Fixes: c6e0d91464da ("cxgb4vf: Add T4 Virtual Function Scatter-Gather Engine DMA code") Fixes: e0a8b34a9cc4 ("cxgb4vf: Add and initialize some sge params for VF driver") Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 0e23daeb6407 ("drivers/net: chelsio/cxgb*: Convert timers to use timer_setup()") Fixes: 3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: update kernel-doc line commentsRahul Lakkireddy
Update several kernel-doc line comments to fix warnings reported by make W=1. Fixes following class of warnings reported by make W=1 in several places: l2t.c:616: warning: Cannot understand * @dev: net_device pointer t4_hw.c:3175: warning: Function parameter or member 'adap' not described in 't4_get_exprom_version' t4_hw.c:3175: warning: Excess function parameter 'adapter' description in 't4_get_exprom_version' Fixes: 56d36be4dd5f ("cxgb4: Add HW and FW support code") Fixes: fd3a47900b6f ("cxgb4: Add packet queues and packet DMA code") Fixes: 26f7cbc0a5a4 ("cxgb4: Don't attempt to upgrade T4 firmware when cxgb4 will end up as a slave") Fixes: 793dad94e745 ("RDMA/cxgb4: Fix bug for active and passive LE hash collision path") Fixes: ba3f8cd55f2a ("cxgb4: Add support in cxgb4 to get expansion rom version via ethtool") Fixes: f7502659cec8 ("cxgb4: Add API to alloc l2t entry; also update existing ones") Fixes: ddc7740d9a7c ("cxgb4: Decode link down reason code obtained from firmware") Fixes: 193c4c2845f7 ("cxgb4: Update T6 Buffer Group and Channel Mappings") Fixes: 8f46d46715a1 ("cxgb4: Use Firmware params to get buffer-group map") Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support") Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 5ccf9d049615 ("cxgb4: update API for TP indirect register access") Fixes: 3bdb376e6944 ("cxgb4: introduce SMT ops to prepare for SMAC rewrite support") Fixes: 736c3b94474e ("cxgb4: collect egress and ingress SGE queue contexts") Fixes: f56ec6766dcf ("cxgb4: Add support for ethtool i2c dump") Fixes: 9d5fd927d20b ("cxgb4/cxgb4vf: add support for ndo_set_vf_vlan") Fixes: 98f3697f8d41 ("cxgb4: add tc flower match support for tunnel VNI") Fixes: 02d805dc5fe3 ("cxgb4: use new fw interface to get the VIN and smt index") Fixes: 3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Fixes: 0e395b3cb1fb ("cxgb4: add FLOWC based QoS offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: fix set but unused variable when DCB is disabledRahul Lakkireddy
Remove the set but unused variable when DCB is disabled. Instead, do the calculation directly inline. Fixes following warning in make W=1: cxgb4_main.c: In function 'cfg_queues': cxgb4_main.c:5380:29: warning: variable 'n1g' set but not used [-Wunused-but-set-variable] u32 i, n10g = 0, qidx = 0, n1g = 0; ^ Fixes: 116ca924aea6 ("cxgb4: fix checks for max queues to allocate") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: move DCB version extern to header fileRahul Lakkireddy
Move the DCB version string array extern to header file. Fixes following sparse warning: cxgb4_dcb.c:13:12: warning: symbol 'dcb_ver_array' was not declared. Should it be static? Fixes: ebddd97afb89 ("cxgb4: add support to display DCB info") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: remove cast when saving IPv4 partial checksumRahul Lakkireddy
The checksum field in IPv4 header is in __sum16 and ip_fast_csum() also returns __sum16. So, no need to cast it to u16. Fixes following sparse warning: sge.c:1539:47: warning: cast from restricted __sum16 sge.c:1539:44: warning: incorrect type in assignment (different base types) sge.c:1539:44: expected restricted __sum16 [usertype] check sge.c:1539:44: got unsigned short [usertype] Fixes: d0a1299c6bf7 ("cxgb4: add support for vxlan segmentation offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: fix SGE queue dump destination buffer contextRahul Lakkireddy
The data in destination buffer is expected to be be parsed in big endian. So, use the right context. Fixes following sparse warning: cudbg_lib.c:2041:44: warning: incorrect type in assignment (different base types) cudbg_lib.c:2041:44: expected unsigned long long [usertype] cudbg_lib.c:2041:44: got restricted __be64 [usertype] Fixes: 736c3b94474e ("cxgb4: collect egress and ingress SGE queue contexts") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: use correct type for all-mask IP address comparisonRahul Lakkireddy
Use correct type to check for all-mask exact match IP addresses. Fixes following sparse warnings due to big endian value checks against 0xffffffff in is_addr_all_mask(): cxgb4_filter.c:977:25: warning: restricted __be32 degrades to integer cxgb4_filter.c:983:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:984:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:985:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:986:37: warning: restricted __be32 degrades to integer Fixes: 3eb8b62d5a26 ("cxgb4: add support to create hash-filters via tc-flower offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: fix endian conversions for L4 ports in filtersRahul Lakkireddy
The source and destination L4 ports in filter offload need to be in CPU endian. They will finally be converted to Big Endian after all operations are done and before giving them to hardware. The L4 ports for NAT are expected to be passed as a byte stream TCB. So, treat them as such. Fixes following sparse warnings in several places: cxgb4_tc_flower.c:159:33: warning: cast from restricted __be16 cxgb4_tc_flower.c:159:33: warning: incorrect type in argument 1 (different base types) cxgb4_tc_flower.c:159:33: expected unsigned short [usertype] val cxgb4_tc_flower.c:159:33: got restricted __be16 [usertype] dst Fixes: dca4faeb812f ("cxgb4: Add LE hash collision bug fix path in LLD driver") Fixes: 62488e4b53ae ("cxgb4: add basic tc flower offload support") Fixes: 557ccbf9dfa8 ("cxgb4: add tc flower support for L3/L4 rewrite") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: parse TC-U32 key values and masks nativelyRahul Lakkireddy
TC-U32 passes all keys values and masks in __be32 format. The parser already expects this and hence pass the value and masks in __be32 natively to the parser. Fixes following sparse warnings in several places: cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base types) cxgb4_tc_u32.c:57:21: expected unsigned int [usertype] val cxgb4_tc_u32.c:57:21: got restricted __be32 [usertype] val cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32 Fixes: 2e8aad7bf203 ("cxgb4: add parser to translate u32 filters to internal spec") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: use unaligned conversion for fetching timestampRahul Lakkireddy
Use get_unaligned_be64() to fetch the timestamp needed for ns_to_ktime() conversion. Fixes following sparse warning: sge.c:3282:43: warning: cast to restricted __be64 Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: move PTP lock and unlock to caller in Tx pathRahul Lakkireddy
Check for whether PTP is enabled or not at the caller and perform locking/unlocking at the caller. Fixes following sparse warning: sge.c:1641:26: warning: context imbalance in 'cxgb4_eth_xmit' - different lock contexts for basic block Fixes: a456950445a0 ("cxgb4: time stamping interface for PTP") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: move handling L2T ARP failures to callerRahul Lakkireddy
Move code handling L2T ARP failures to the only caller. Fixes following sparse warning: skbuff.h:2091:29: warning: context imbalance in 'handle_failed_resolution' - unexpected unlock Fixes: 749cb5fe48bb ("cxgb4: Replace arpq_head/arpq_tail with SKB double link-list code") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23drm/amdgpu/display: Unlock mutex on errorJohn van der Kamp
Make sure we pass through ret label to unlock the mutex. Signed-off-by: John van der Kamp <sjonny@suffe.me.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-06-23net: qed: fix "maybe uninitialized" warningAlexander Lobakin
Variable 'abs_ppfid' in qed_dev.c:qed_llh_add_mac_filter() always gets printed, but is initialized only under 'ref_cnt == 1' condition. This results in: In file included from ./include/linux/kernel.h:15:0, from ./include/asm-generic/bug.h:19, from ./arch/x86/include/asm/bug.h:86, from ./include/linux/bug.h:5, from ./include/linux/io.h:11, from drivers/net/ethernet/qlogic/qed/qed_dev.c:35: drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_add_mac_filter': ./include/linux/printk.h:358:2: warning: 'abs_ppfid' may be used uninitialized in this function [-Wmaybe-uninitialized] printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~ drivers/net/ethernet/qlogic/qed/qed_dev.c:983:17: note: 'abs_ppfid' was declared here u8 filter_idx, abs_ppfid; ^~~~~~~~~ ...under W=1+. Fix this by initializing it with zero. Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for offload protocols") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: reset ILT block sizes before recomputing to fix crashesAlexander Lobakin
Sizes of all ILT blocks must be reset before ILT recomputing when disabling clients, or memory allocation may exceed ILT shadow array and provoke system crashes. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: fix use-after-free on recovery and AER handlingAlexander Lobakin
Set edev->cdev pointer to NULL after calling remove() callback to avoid using of already freed object. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: fix PTP initialization on recoveryAlexander Lobakin
Currently PTP cyclecounter and timecounter are initialized only on the first probing and are cleaned up during removal. This means that PTP becomes non-functional after device recovery. Fix this by unconditional PTP initialization on probing and clearing Tx pending bit on exiting. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix excessive QM ILT lines consumptionAlexander Lobakin
This is likely a copy'n'paste mistake. The amount of ILT lines to reserve for a single VF was being multiplied by the total VFs count. This led to a huge redundancy in reservation and potential lines drainouts. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix NVMe login fails over VFsAlexander Lobakin
25ms sleep cycles in waiting for PF response are excessive and may lead to different timeout failures. Start to wait with short udelays, and in most cases polling will end here. If the time was not sufficient, switch to msleeps. usleep_range() may go far beyond 100us depending on platform and tick configuration, hence atomic udelays for consistency. Also add explicit DMA barriers since 'done' always comes from a shared request-response DMA pool, and note that in the comment nearby. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: stop adding events on an already destroyed workqueueAlexander Lobakin
Set rdma_wq pointer to NULL after destroying the workqueue and check for it when adding new events to fix crashes on driver unload. Fixes: cee9fbd8e2e9 ("qede: Add qedr framework") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qed: fix async event callbacks unregisteringAlexander Lobakin
qed_spq_unregister_async_cb() should be called before qed_rdma_info_free() to avoid crash-spawning uses-after-free. Instead of calling it from each subsystem exit code, do it in one place on PF down. Fixes: 291d57f67d24 ("qed: Fix rdma_info structure allocation") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23wireguard: device: avoid circular netns referencesJason A. Donenfeld
Before, we took a reference to the creating netns if the new netns was different. This caused issues with circular references, with two wireguard interfaces swapping namespaces. The solution is to rather not take any extra references at all, but instead simply invalidate the creating netns pointer when that netns is deleted. In order to prevent this from happening again, this commit improves the rough object leak tracking by allowing it to account for created and destroyed interfaces, aside from just peers and keys. That then makes it possible to check for the object leak when having two interfaces take a reference to each others' namespaces. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23wireguard: noise: do not assign initiation time in if conditionFrank Werner-Krippendorf
Fixes an error condition reported by checkpatch.pl which caused by assigning a variable in an if condition in wg_noise_handshake_consume_ initiation(). Signed-off-by: Frank Werner-Krippendorf <mail@hb9fxq.ch> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23i2c: designware: Adjust bus speed independently of ACPIAndy Shevchenko
John Stultz reported that commit f9288fcc5c615 ("i2c: designware: Move ACPI parts into common module") caused a regression on the HiKey board where adv7511 HDMI bridge driver wasn't probing anymore due the I2C bus failed to start. It seems the change caused the bus speed being zero when CONFIG_ACPI not set and neither speed based on "clock-frequency" device property or default fast mode is set. Fix this by splitting i2c_dw_acpi_adjust_bus_speed() to i2c_dw_acpi_round_bus_speed() and i2c_dw_adjust_bus_speed(), where the latter one has the code that runs independently of ACPI. Fixes: f9288fcc5c615 ("i2c: designware: Move ACPI parts into common module") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-23drm/sun4i: mixer: Call of_dma_configure if there's an IOMMUMaxime Ripard
The main DRM device is actually a virtual device so it doesn't have the iommus property, which is instead on the DMA masters, in this case the mixers. Add a call to of_dma_configure with the mixers DT node but on the DRM virtual device to configure it in the same way than the mixers. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/9a4daf438dd3f2fe07afb23688bfb793a0613d7d.1589378833.git-series.maxime@cerno.tech (cherry picked from commit b718102dbdfd0285ad559687a30e27cc9124e592) [Maxime: Applied to -fixes since it missed the merge window and display is broken without it] Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-06-23PM: sleep: core: mark 2 functions as __init to save some memoryChristophe JAILLET
'early_resume_init()' and 'late_resume_init() 'are only called respectively via 'early_resume_init' and 'late_resume_init'. They can be marked as __init to save a few bytes of memory. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-23cpufreq: intel_pstate: Add one more OOB control bitSrinivas Pandruvada
Add one more bit for OOB (Out Of Band) enabling of P-states. If OOB handling of P-states is enabled, intel_pstate shouldn't load. Currently, only "BIT(8) == 1" of the MSR MSR_MISC_PWR_MGMT is considered as OOB, but "BIT(18) == 1" needs to be taken into consideration as OOB condition too. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Add an empty code line, edit subject and changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-23PM: s2idle: Clear _TIF_POLLING_NRFLAG before suspend to idleChen Yu
Suspend to idle was found to not work on Goldmont CPU recently. The issue happens due to: 1. On Goldmont the CPU in idle can only be woken up via IPIs, not POLLING mode, due to commit 08e237fa56a1 ("x86/cpu: Add workaround for MONITOR instruction erratum on Goldmont based CPUs") 2. When the CPU is entering suspend to idle process, the _TIF_POLLING_NRFLAG remains on, because cpuidle_enter_s2idle() doesn't match call_cpuidle() exactly. 3. Commit b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()") makes use of _TIF_POLLING_NRFLAG to avoid sending IPIs to idle CPUs. 4. As a result, some IPIs related functions might not work well during suspend to idle on Goldmont. For example, one suspected victim: tick_unfreeze() -> timekeeping_resume() -> hrtimers_resume() -> clock_was_set() -> on_each_cpu() might wait forever, because the IPIs will not be sent to the CPUs which are sleeping with _TIF_POLLING_NRFLAG set, and Goldmont CPU could not be woken up by only setting _TIF_NEED_RESCHED on the monitor address. To avoid that, clear the _TIF_POLLING_NRFLAG flag before invoking enter_s2idle_proper() in cpuidle_enter_s2idle() in analogy with the call_cpuidle() code flow. Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()") Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> [ rjw: Subject / changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-23hwmon: (pmbus) Fix page vs. register when accessing fansJan Kundrát
Commit 16358542f32f ("hwmon: (pmbus) Implement multi-phase support") added support for multi-phase pmbus devices. However, when calling pmbus_add_sensor() for fans, the patch swapped the `page` and `reg` attributes. As a result, the fan speeds were reported as 0 RPM on my device. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Fixes: 16358542f32f ("hwmon: (pmbus) Implement multi-phase support") Cc: stable@vger.kernel.org # v5.7+ Link: https://lore.kernel.org/r/449bc9e6c0e4305581e45905ce9d043b356a9932.1592904387.git.jan.kundrat@cesnet.cz [groeck: Fixed references to offending commit] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-06-23hwmon: (bt1-pvt) Mark is_visible functions staticGuenter Roeck
0-day reports: drivers/hwmon/bt1-pvt.c:303:16: warning: no previous declaration for 'pvt_limit_is_visible' drivers/hwmon/bt1-pvt.c:308:16: warning: no previous declaration for 'pvt_alarm_is_visible' Declare both functions static. Reported-by: kernel test robot <lkp@intel.com> Fixes: 87976ce2825d("hwmon: Add Baikal-T1 PVT sensor driver") Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-06-23hwmon: (bt1-pvt) Define Temp- and Volt-to-N poly as maybe-unusedSerge Semin
Clang-based kernel building with W=1 warns that some static const variables are unused: drivers/hwmon/bt1-pvt.c:67:30: warning: unused variable 'poly_temp_to_N' [-Wunused-const-variable] static const struct pvt_poly poly_temp_to_N = { ^ drivers/hwmon/bt1-pvt.c:99:30: warning: unused variable 'poly_volt_to_N' [-Wunused-const-variable] static const struct pvt_poly poly_volt_to_N = { ^ Indeed these polynomials are utilized only when the PVT sensor alarms are enabled. In that case they are used to convert the temperature and voltage alarm limits from normal quantities (Volts and degree Celsius) to the sensor data representation N = [0, 1023]. Otherwise when alarms are disabled the driver only does the detected data conversion to the human readable form and doesn't need that polynomials defined. So let's mark the Temp-to-N and Volt-to-N polynomials with __maybe_unused attribute. Note gcc with W=1 doesn't notice the problem. Fixes: 87976ce2825d ("hwmon: Add Baikal-T1 PVT sensor driver") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200603000753.391-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-06-23soc: imx8m: Correct i.MX8MP UID fuse offsetAnson Huang
Correct i.MX8MP UID fuse offset according to fuse map: UID_LOW: 0x420 UID_HIGH: 0x430 Fixes: fc40200ebf82 ("soc: imx: increase build coverage for imx8m soc driver") Fixes: 18f662a73862 ("soc: imx: Add i.MX8MP SoC driver support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-23regulator: qcom_smd: Fix pmi8994 labelKonrad Dybcio
s3 was mislabeled as s2. Fix it. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200620144639.335093-19-konradybcio@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-23drm: panel-orientation-quirks: Use generic orientation-data for Acer S1003Hans de Goede
The Acer S1003 has proper DMI strings for sys-vendor and product-name, so we do not need to match by BIOS-date. This means that the Acer S1003 can use the generic lcd800x1280_rightside_up drm_dmi_panel_orientation_data struct which is also used by other quirks. Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-2-hdegoede@redhat.com
2020-06-23drm: panel-orientation-quirks: Add quirk for Asus T101HA panelHans de Goede
Like the Asus T100HA the Asus T101HA also uses a panel which has been mounted 90 degrees rotated, albeit in the opposite direction. Add a quirk for this. Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-1-hdegoede@redhat.com
2020-06-23KVM: arm64: vgic-v4: Plug race between non-residency and v4.1 doorbellMarc Zyngier
When making a vPE non-resident because it has hit a blocking WFI, the doorbell can fire at any time after the write to the RD. Crucially, it can fire right between the write to GICR_VPENDBASER and the write to the pending_last field in the its_vpe structure. This means that we would overwrite pending_last with stale data, and potentially not wakeup until some unrelated event (such as a timer interrupt) puts the vPE back on the CPU. GICv4 isn't affected by this as we actively mask the doorbell on entering the guest, while GICv4.1 automatically manages doorbell delivery without any hypervisor-driven masking. Use the vpe_lock to synchronize such update, which solves the problem altogether. Fixes: ae699ad348cdc ("irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer") Reported-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-06-23USB: serial: ch341: add new Product ID for CH340Igor Moura
Add PID for CH340 that's found on some ESP8266 dev boards made by LilyGO. The specific device that contains such serial converter can be seen here: https://github.com/LilyGO/LILYGO-T-OI. Apparently, it's a regular CH340, but I've confirmed with others that also bought this board that the PID found on this device (0x7522) differs from other devices with the "same" converter (0x7523). Simply adding its PID to the driver and rebuilding it made it work as expected. Signed-off-by: Igor Moura <imphilippini@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-06-23iommu/vt-d: Fix misuse of iommu_domain_identity_map()Lu Baolu
The iommu_domain_identity_map() helper takes start/end PFN as arguments. Fix a misuse case where the start and end addresses are passed. Fixes: e70b081c6f376 ("iommu/vt-d: Remove IOVA handling code from the non-dma_ops path") Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Tom Murphy <murphyt7@tcd.ie> Link: https://lore.kernel.org/r/20200622231345.29722-7-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-06-23iommu/vt-d: Update scalable mode paging structure coherencyLu Baolu
The Scalable-mode Page-walk Coherency (SMPWC) field in the VT-d extended capability register indicates the hardware coherency behavior on paging structures accessed through the pasid table entry. This is ignored in current code and using ECAP.C instead which is only valid in legacy mode. Fix this so that paging structure updates could be manually flushed from the cache line if hardware page walking is not snooped. Fixes: 765b6a98c1de3 ("iommu/vt-d: Enumerate the scalable mode capability") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Link: https://lore.kernel.org/r/20200622231345.29722-6-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-06-23iommu/vt-d: Enable PCI ACS for platform opt in hintLu Baolu
PCI ACS is disabled if Intel IOMMU is off by default or intel_iommu=off is used in command line. Unfortunately, Intel IOMMU will be forced on if there're devices sitting on an external facing PCI port that is marked as untrusted (for example, thunderbolt peripherals). That means, PCI ACS is disabled while Intel IOMMU is forced on to isolate those devices. As the result, the devices of an MFD will be grouped by a single group even the ACS is supported on device. [ 0.691263] pci 0000:00:07.1: Adding to iommu group 3 [ 0.691277] pci 0000:00:07.2: Adding to iommu group 3 [ 0.691292] pci 0000:00:07.3: Adding to iommu group 3 Fix it by requesting PCI ACS when Intel IOMMU is detected with platform opt in hint. Fixes: 89a6079df791a ("iommu/vt-d: Force IOMMU on for platform opt in hint") Co-developed-by: Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com> Signed-off-by: Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/20200622231345.29722-5-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-06-23iommu/vt-d: Don't apply gfx quirks to untrusted devicesRajat Jain
Currently, an external malicious PCI device can masquerade the VID:PID of faulty gfx devices, and thus apply iommu quirks to effectively disable the IOMMU restrictions for itself. Thus we need to ensure that the device we are applying quirks to, is indeed an internal trusted device. Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200622231345.29722-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-06-23iommu/vt-d: Set U/S bit in first level page table by defaultLu Baolu
When using first-level translation for IOVA, currently the U/S bit in the page table is cleared which implies DMA requests with user privilege are blocked. As the result, following error messages might be observed when passing through a device to user level: DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000 [fault reason 129] SM: U/S set 0 for first-level translation with user privilege This fixes it by setting U/S bit in the first level page table and makes IOVA over first level compatible with previous second-level translation. Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level") Reported-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-06-23iommu/vt-d: Make Intel SVM code 64-bit onlyLu Baolu
Current Intel SVM is designed by setting the pgd_t of the processor page table to FLPTR field of the PASID entry. The first level translation only supports 4 and 5 level paging structures, hence it's infeasible for the IOMMU to share a processor's page table when it's running in 32-bit mode. Let's disable 32bit support for now and claim support only when all the missing pieces are ready in the future. Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode") Suggested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200622231345.29722-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-06-23USB: serial: option: add GosunCn GM500 seriesJörgen Storvist
Add USB IDs for GosunCn GM500 series cellular modules. RNDIS config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1404 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option MBIM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1405 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim ECM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1406 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-06-23USB: serial: cypress_m8: enable Simply Automated UPB PIMJames Hilliard
This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module) which allows for controlling multiple UPB compatible devices from Linux using the standard serial interface. Based on vendor application source code there are two different models of USB based PIM devices in addition to a number of RS232 based PIM's. The vendor UPB application source contains the following USB ID's: #define USB_PCS_VENDOR_ID 0x04b4 #define USB_PCS_PIM_PRODUCT_ID 0x5500 #define USB_SAI_VENDOR_ID 0x17dd #define USB_SAI_PIM_PRODUCT_ID 0x5500 The first set of ID's correspond to the PIM variant sold by Powerline Control Systems while the second corresponds to the Simply Automated Incorporated PIM. As the product ID for both of these match the default cypress HID->COM RS232 product ID it assumed that they both use an internal variant of this HID->COM RS232 converter hardware. However as the vendor ID for the Simply Automated variant is different we need to also add it to the cypress_M8 driver so that it is properly detected. Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org [ johan: amend VID define entry ] Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 01:04:19 +0000