summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-12-09Merge remote-tracking branch 'arm64/for-next/fixes' into for-next/coreCatalin Marinas
* arm64/for-next/fixes: (26 commits) arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE arm64: mte: Fix typo in macro definition arm64: entry: fix EL1 debug transitions arm64: entry: fix NMI {user, kernel}->kernel transitions arm64: entry: fix non-NMI kernel<->kernel transitions arm64: ptrace: prepare for EL1 irq/rcu tracking arm64: entry: fix non-NMI user<->kernel transitions arm64: entry: move el1 irq/nmi logic to C arm64: entry: prepare ret_to_user for function call arm64: entry: move enter_from_user_mode to entry-common.c arm64: entry: mark entry code as noinstr arm64: mark idle code as noinstr arm64: syscall: exit userspace before unmasking exceptions arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect() arm64: pgtable: Fix pte_accessible() ACPI/IORT: Fix doc warnings in iort.c arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist ... # Conflicts: # arch/arm64/include/asm/exception.h # arch/arm64/kernel/sdei.c
2020-12-09Merge remote-tracking branch 'arm64/for-next/perf' into for-next/coreCatalin Marinas
* arm64/for-next/perf: perf/imx_ddr: Add system PMU identifier for userspace bindings: perf: imx-ddr: add compatible string arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled arm64: Enable perf events based hard lockup detector perf/imx_ddr: Add stop event counters support for i.MX8MP perf/smmuv3: Support sysfs identifier file drivers/perf: hisi: Add identifier sysfs file perf: remove duplicate check on fwnode driver/perf: Add PMU driver for the ARM DMC-620 memory controller
2020-12-09Merge branch 'for-next/uaccess' into for-next/coreCatalin Marinas
* for-next/uaccess: : uaccess routines clean-up and set_fs() removal arm64: mark __system_matches_cap as __maybe_unused arm64: uaccess: remove vestigal UAO support arm64: uaccess: remove redundant PAN toggling arm64: uaccess: remove addr_limit_user_check() arm64: uaccess: remove set_fs() arm64: uaccess cleanup macro naming arm64: uaccess: split user/kernel routines arm64: uaccess: refactor __{get,put}_user arm64: uaccess: simplify __copy_user_flushcache() arm64: uaccess: rename privileged uaccess routines arm64: sdei: explicitly simulate PAN/UAO entry arm64: sdei: move uaccess logic to arch/arm64/ arm64: head.S: always initialize PSTATE arm64: head.S: cleanup SCTLR_ELx initialization arm64: head.S: rename el2_setup -> init_kernel_el arm64: add C wrappers for SET_PSTATE_*() arm64: ensure ERET from kthread is illegal
2020-12-09Merge tag 'iommu-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull iommu fix from Will Deacon: "Fix interrupt table length definition for AMD IOMMU. It's actually a fix for a fix, where the size of the interrupt remapping table was increased but a related constant for the size of the interrupt table was forgotten" * tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: iommu/amd: Set DTE[IntTabLen] to represent 512 IRTEs
2020-12-09USB: serial: ftdi_sio: log the CBUS GPIO validityMarc Zyngier
The validity of the ftdi CBUS GPIO is pretty hidden so far, and finding out *why* some GPIOs don't work is sometimes hard to identify. So let's help the user by displaying the map of the CBUS pins that are valid for a GPIO. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201204164739.781812-4-maz@kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [johan: demote to KERN_DEBUG, rephrase messages, drop ftx-prog warning] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-12-09USB: serial: ftdi_sio: drop GPIO line checking dead codeMarc Zyngier
Now that gpiolib can track the validity of GPIO pins, there is no need to check whether the line is valid in request(). Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201204164739.781812-5-maz@kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [johan: amend commit message] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-12-09USB: serial: ftdi_sio: report the valid GPIO lines to gpiolibMarc Zyngier
Since it is pretty common for only some of the CBUS lines to be valid as GPIO lines, let's report such validity to the rest of the kernel. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201204164739.781812-3-maz@kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-12-09spi: spi-geni-qcom: Use the new method of gpio CS controlStephen Boyd
Let's set the 'use_gpio_descriptors' field so that we use the new way of requesting the CS GPIOs in the core. This allows us to avoid having to configure the CS pins in "output" mode with an 'output-enable' pinctrl setting. Cc: Akash Asthana <akashast@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20201204193540.3047030-4-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09platform/chrome: cros_ec_spi: Drop bits_per_word assignmentStephen Boyd
This is already handed by default in spi_setup() if the bits_per_word is 0, so just drop it to shave off a line. Cc: Simon Glass <sjg@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20201204193540.3047030-3-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09platform/chrome: cros_ec_spi: Don't overwrite spi::modeStephen Boyd
There isn't any need to overwrite the mode here in the driver with what has been detected by the firmware, such as DT or ACPI. In fact, if we use the SPI CS gpio descriptor feature we will overwrite the mode with SPI_MODE_0 where it already contains SPI_MODE_0 and more importantly SPI_CS_HIGH. Clearing the SPI_CS_HIGH bit causes the CS line to toggle when the device is probed when it shouldn't change, confusing the driver and making it fail to probe. Drop the assignment and let the spi core take care of it. Fixes: a17d94f0b6e1 ("mfd: Add ChromeOS EC SPI driver") Cc: Simon Glass <sjg@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20201204193540.3047030-2-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09scsi: mpt3sas: Update driver version to 36.100.00.00Suganath Prabu S
Update driver version to 36.100.00.00 Link: https://lore.kernel.org/r/20201126094311.8686-9-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: mpt3sas: Handle trigger page after firmware updateSuganath Prabu S
If a firmware update adds support for the trigger pages, then the driver should handle this by writing the existing trigger data from the driver's internal data structure to the corresponding trigger pages in NVRAM. Also handle the case where the trigger page capability is no longer present after a firmware downgrade. Link: https://lore.kernel.org/r/20201126094311.8686-8-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: mpt3sas: Add persistent MPI trigger pageSuganath Prabu S
This page is used to store information about MPI (IOC Status & LogInfo) triggers. Driver Persistent Trigger Page-4 format: ------------------------------------------------------- | 31 24 23 16 15 8 7 0| Byte ------------------------------------------------------- | PageType | PageNumber | Reserved | PageVersion | 0x00 -------------------------------------------------------- | Reserved | ExtPageType | ExtPageLength | 0x04 -------------------------------------------------------- | Reserved | NumMpiTriggerEntries | 0x08 -------------------------------------------------------- | MPITriggerEntry[0] | 0x0C -------------------------------------------------------- | … | -------------------------------------------------------- | MPITriggerEntry[19] | 0xA4 -------------------------------------------------------- NumMpiTriggerEntries: This field indicates number of MPI (IOC Status & LogInfo) trigger entries stored in this page. Currently driver is supporting a maximum of 20-MPI trigger entries. MPITriggerEntry: ----------------------------------------------------- | 31 16 15 0 | ----------------------------------------------------- | Reserved | IOCStatus | ----------------------------------------------------- | IOCLogInfo | ----------------------------------------------------- IOCStatus => Status value from the IOC IOCLogInfo => Specific value that supplements the IOCStatus. Link: https://lore.kernel.org/r/20201126094311.8686-7-suganath-prabu.subramani@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: mpt3sas: Add persistent SCSI sense trigger pageSuganath Prabu S
Trigger Page3 is used to store information about SCSI Sense triggers: Persistent Trigger Page-3 ------------------------------------------------------------------ | 31 24 23 16 15 8 7 0| Byte ------------------------------------------------------------------ | PageType | PageNumber | Reserved | PageVersion | 0x00 ------------------------------------------------------------------ | Reserved | ExtPageType | ExtPageLen | 0x04 ------------------------------------------------------------------ | Reserved | NumScsiSense | TriggerEntries | 0x08 ------------------------------------------------------------------ | ScsiSenseTriggerEntry[0] | 0x0C ------------------------------------------------------------------ | … … | ------------------------------------------------------------------ | ScsiSenseTriggerEntry[19] | 0x58 ------------------------------------------------------------------ NumScsiSenseTriggerEntries: This field indicates number of SCSI Sense trigger entries stored in this page. Currently driver is supporting a maximum of 20-SCSI Sense trigger entries. ScsiSenseTriggerEntry: ----------------------------------------------- | 31 24 23 16 15 8 7 0 | ----------------------------------------------- | Reserved | SenseKey | ASC | ASCQ | ----------------------------------------------- ASCQ => Additional Sense Code Qualifier ASC => Additional Sense Code SenseKey => Sense Key values ASCQ => Additional Sense Code Qualifier ASC => Additional Sense Code SenseKey => Sense Key values Link: https://lore.kernel.org/r/20201126094311.8686-6-suganath-prabu.subramani@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: mpt3sas: Add persistent Event trigger pageSuganath Prabu S
Trigger Page2 is used to store information about Event triggers: 31 24 23 16 15 8 7 0 Byte ----------------------------------------------- |PageType |PageNumber |Reserved |PageVersion| 0x00 ----------------------------------------------- |Reserved |ExtPageType | ExtPageLength | 0x04 ----------------------------------------------- | Reserved | NumMPIEventTriggers | 0x08 ----------------------------------------------- | MPIEventTriggerEntries | 0x0C | | 0xFC ----------------------------------------------- Number of MPI Event Trigger Entries currently stored in this page. If this is set to zero, there are no valid MPI-Event-Trigger entries available in this page. MPIEventTriggerEntry: - MPIEventCode [15:00] MPI Event code specified in MPI-Spec - MPIEventCodeSpecific [16:31] For Event Code “MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)”, this field specifies the Log-Entry-Qualifier. For all other Event Codes, this field is reserved and not used Maximum of 20-event trigger entries can be stored in this page. Link: https://lore.kernel.org/r/20201126094311.8686-5-suganath-prabu.subramani@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: mpt3sas: Add persistent Master trigger pageSuganath Prabu S
Trigger Page 1 is used to store information about Master triggers. Below are the Master trigger conditions: Bit[3] Trigger condition for Device Removal event Bit[2] Trigger condition for TM command issued by driver Bit[1] Trigger condition for Adapter reset issued by driver Bit[0] Trigger condition for IOC Fault state During driver load, if Master trigger type bit is enabled in the Persistent Trigger Page0, then read the Persistent Trigger Page1 and update the IOC instance's diag_trigger_master.MasterData with Persistent Trigger Page1's MasterTriggerFlags. Link: https://lore.kernel.org/r/20201126094311.8686-4-suganath-prabu.subramani@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: mpt3sas: Add persistent trigger pages supportSuganath Prabu S
The user can set trigger values in order to collect the IOC's host trace buffer automatically upon detecting certain conditions. However, the trigger values that the user sets are not persistent across system reboot or reload of the driver. In order to make the user trigger settings persistent, these trigger values need to be saved in the IOC's NVRAM pages: - Driver Persistent Trigger Page 0: This page is used to store list of trigger types that are enabled - Driver Persistent Trigger Page 1: This page stores the list of Master triggers that are enabled - Driver Persistent Trigger Page 2: This page stores the list of MPI Event Triggers that are enabled - Driver Persistent Trigger Page 3: This page stores the list of SCSI Sense Triggers that are enabled - Driver Persistent Trigger Page 4: This page stores the list of IOCStatus-LogInfo Triggers that are enabled. Whenever user configures triggers, the driver persists the values in the corresponding trigger pages. When the driver is subsequently reloaded, the driver reads the values from the trigger pages and configures the triggers accordingly. During firmware upload operation, if the newer firmware supports the trigger page feature, then driver persists the configured diag trigger values to NVRAM. Link: https://lore.kernel.org/r/20201126094311.8686-3-suganath-prabu.subramani@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: mpt3sas: Sync time periodically between driver and firmwareSuganath Prabu S
The controller time currently gets updated with host time during driver load or when a controller reset is issued. I.e. when host issues the IOCInit request message to the HBA firmware. This IOCInit message has a field named 'TimeStamp' with which the host updates the controller time. Sometimes controller time drifts with respect to the host and it is difficult to correlate host logs with controller logs. Issuing a controller reset to sync the time would impact in-flight I/O and is not a viable option. Instead the driver now sends an IO_UNIT_CONTROL Request to sync the time periodically. This is done from the watchdog thread which gets invoked every second. The time synchronization interval is specified in the 'TimeSyncInterval' field in Manufacturing Page11 by the controller: TimeSyncInterval - 8 bits bits 0-6: Time stamp Synchronization interval value bit 7: Time stamp Synchronization interval unit, (if this bit is one then Timestamp Synchronization interval value is specified in terms of hours else Timestamp Synchronization interval value is specified in terms of minutes). The driver keeps track of the timer using IOC's timestamp_update_count field. This field value gets incremented whenever the watchdog thread gets invoked. And whenever this field value is greater than or equal to the Time Stamp Synchronization interval value, the driver sends the IO_UNIT_CONTROL Request message to controller to update the time and then it resets the timestamp_update_count field to zero. Link: https://lore.kernel.org/r/20201126094311.8686-2-suganath-prabu.subramani@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Update version to 10.02.00.104-kNilesh Javali
Link: https://lore.kernel.org/r/20201202132312.19966-16-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Fix device loss on 4G and older HBAsArun Easi
Due to a bug in the older scan logic, when a once lost device re-appeared, it was not discovered. Fix this by resetting login_retry counter upon device discovery. This is applicable only for 4G and older HBAs. Link: https://lore.kernel.org/r/20201202132312.19966-15-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retrySaurav Kashyap
Driver unload with I/Os in flight causes server to crash. Complete I/O with DID_IMM_RETRY if fcport undergoing deletion. CPU: 44 PID: 35008 Comm: qla2xxx_4_dpc Kdump: loaded Tainted: G OE X 5.3.18-22-default #1 SLE15-SP2 (unreleased) Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 07/16/2020 RIP: 0010:dma_direct_unmap_sg+0x24/0x60 Code: 4c 8b 04 24 eb b9 0f 1f 44 00 00 85 d2 7e 4e 41 57 4d 89 c7 41 56 41 89 ce 41 55 49 89 fd 41 54 41 89 d4 55 31 ed 53 48 89 f3 <8b> 53 18 48 8b 73 10 4d 89 f8 44 89 f1 4c 89 ef 83 c5 01 e8 44 ff RSP: 0018:ffffc0c661037d88 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 RDX: 000000000000001d RSI: 0000000000000000 RDI: ffff9a51ee53b0b0 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9a51ee53b0b0 R10: ffffc0c646463dc8 R11: ffff9a4a067087c8 R12: 000000000000001d R13: ffff9a51ee53b0b0 R14: 0000000000000002 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9a523f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000043740a004 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: qla2xxx_qpair_sp_free_dma+0x20d/0x3c0 [qla2xxx] qla2xxx_qpair_sp_compl+0x35/0x90 [qla2xxx] __qla2x00_abort_all_cmds+0x180/0x390 [qla2xxx] ? qla24xx_process_purex_list+0x100/0x100 [qla2xxx] qla2x00_abort_all_cmds+0x5e/0x80 [qla2xxx] qla2x00_do_dpc+0x317/0xa30 [qla2xxx] kthread+0x10d/0x130 ? kthread_park+0xa0/0xa0 ret_from_fork+0x35/0x40 Link: https://lore.kernel.org/r/20201202132312.19966-14-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Fix the call trace for flush workqueueSaurav Kashyap
The call trace was because workqueue was allocated without any flags, added WQ_MEM_RECLAIM as flag when allocating. kernel: workqueue: WQ_MEM_RECLAIM kblockd:blk_mq_run_work_fn is flushing !WQ_MEM_RECLAIM qla2xxx_wq:0x0 kernel: WARNING: CPU: 0 PID: 2475 at kernel/workqueue.c:2593 check_flush_dependency+0x110/0x130 kernel: CPU: 0 PID: 2475 Comm: kworker/0:1H Kdump: loaded Tainted: G OE --------- - - 4.18.0-193.el8.x86_64 #1 kernel: Hardware name: HPE ProLiant XL170r Gen10/ProLiant XL170r Gen10, BIOS U38 05/21/2019 kernel: Workqueue: kblockd blk_mq_run_work_fn kernel: RIP: 0010:check_flush_dependency+0x110/0x130 kernel: Code: ff ff 48 8b 50 18 48 8d 8b b0 00 00 00 49 89 e8 48 81 c6 b0 00 00 00 48 c7 c7 00 1e e9 95 c6 05 dc 9a 2f 01 01 e8 1a 42 fe ff <0f> 0b e9 0a ff ff ff 80 3d ca 9a 2f 01 0 0 75 95 e9 41 ff ff ff 90 kernel: RSP: 0018:ffffa40f48b2baf8 EFLAGS: 00010282 kernel: RAX: 0000000000000000 RBX: ffff946795282600 RCX: 0000000000000000 kernel: RDX: 000000000000005f RSI: ffffffff96a1af7f RDI: 0000000000000246 kernel: RBP: 0000000000000000 R08: ffffffff96a1af20 R09: 0000000000029480 kernel: R10: 00080c89bb3e7462 R11: 00000000000009ab R12: ffff946773628000 kernel: R13: 0000000000000282 R14: 0000000000000246 R15: ffffa40f48b2bb40 kernel: FS: 0000000000000000(0000) GS:ffff94679fa00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00005570c4b60110 CR3: 000000029140a005 CR4: 00000000007606f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: PKRU: 55555554 kernel: Call Trace: kernel: flush_workqueue+0x13a/0x440 kernel: qla2x00_wait_for_sess_deletion+0x1d6/0x200 [qla2xxx] kernel: ? finish_wait+0x80/0x80 kernel: qla2xxx_disable_port+0x2b/0x30 [qla2xxx] kernel: qla2x00_process_vendor_specific+0x1dc9/0x2d20 [qla2xxx] kernel: ? blk_rq_map_sg+0x195/0x570 kernel: qla24xx_bsg_request+0x1a3/0xf90 [qla2xxx] Link: https://lore.kernel.org/r/20201202132312.19966-13-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machinesArun Easi
Flash update failed due to missing endian conversion in FLT region access as well as in checksum computation. Link: https://lore.kernel.org/r/20201202132312.19966-12-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Handle aborts correctly for port undergoing deletionSaurav Kashyap
Call trace observed while shutting down the adapter ports (LINK DOWN). Handle aborts correctly. localhost kernel: INFO: task nvme:44209 blocked for more than 120 seconds. localhost kernel: "echo 0 >/proc/sys/kernel/hung_task_timeout_secs" disables this message. localhost kernel: nvme D ffff88b45fb5acc0 0 44209 1 0x00000080 localhost kernel: Call Trace: localhost kernel: [<ffffffffbd187169>] schedule+0x29/0x70 localhost kernel: [<ffffffffbd184c51>] schedule_timeout+0x221/0x2d0 localhost kernel: [<ffffffffbcad7229>] ? ttwu_do_wakeup+0x19/0xe0 localhost kernel: [<ffffffffbcad735f>] ? ttwu_do_activate+0x6f/0x80 localhost kernel: [<ffffffffbcada830>] ? try_to_wake_up+0x190/0x390 localhost kernel: [<ffffffffbd18751d>] wait_for_completion+0xfd/0x140 localhost kernel: [<ffffffffbcadaaf0>] ? wake_up_state+0x20/0x20 localhost kernel: [<ffffffffbcabe3da>] flush_work+0x10a/0x1b0 localhost kernel: [<ffffffffbcabb0f0>] ? move_linked_works+0x90/0x90 localhost kernel: [<ffffffffbcabe6cf>] flush_delayed_work+0x3f/0x50 localhost kernel: [<ffffffffc0452767>] nvme_fc_init_ctrl+0x657/0x6a0 [nvme_fc] localhost kernel: [<ffffffffc045293a>] nvme_fc_create_ctrl+0x18a/0x210 [nvme_fc] localhost kernel: [<ffffffffc028962f>] nvmf_dev_write+0x98f/0xb35 [nvme_fabrics] localhost kernel: [<ffffffffbcd08927>] ? security_file_permission+0x27/0xa0 localhost kernel: [<ffffffffbcc4db50>] vfs_write+0xc0/0x1f0 localhost kernel: [<ffffffffbcc4e92f>] SyS_write+0x7f/0xf0 localhost kernel: [<ffffffffbd193f92>] system_call_fastpath+0x25/0x2a Link: https://lore.kernel.org/r/20201202132312.19966-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Fix N2N and NVMe connect retry failureQuinn Tran
FC-NVMe target discovery failed when initiator wwpn < target wwpn in an N2N (Direct Attach) config, where the driver was stuck on FCP PRLI mode and failed to retry with NVMe PRLI. Link: https://lore.kernel.org/r/20201202132312.19966-10-njavali@marvell.com Fixes: 84ed362ac40c ("scsi: qla2xxx: Dual FCP-NVMe target port support”) Fixes: 983f127603fa ("scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure”) Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Fix FW initialization error on big endian machinesArun Easi
Some fields are not correctly byte swapped causing failure during initialization. As probe() returns failure, HBAs will not be claimed when this happens. qla2xxx [0007:01:00.0]-ffff:3: Secure Flash Update in FW: Supported qla2xxx [0007:01:00.0]-ffff:3: SCM in FW: Supported qla2xxx [0007:01:00.0]-00d2:3: Init Firmware **** FAILED ****. qla2xxx [0007:01:00.0]-00d6:3: Failed to initialize adapter - Adapter flags 2. qla2xxx 0007:01:00.1: enabling device (0140 -> 0142) qla2xxx [0007:01:00.1]-011c: : MSI-X vector count: 128. qla2xxx [0007:01:00.1]-001d: : Found an ISP2289 irq 18 iobase 0xd000080080004000. qla2xxx 0007:01:00.1: Using 64-bit direct DMA at offset 800000000000000 BUG: Bad page state in process insmod pfn:67118 page:f00000000168bd40 count:-1 mapcount:0 mapping: (null) index:0x0 page flags: 0x3ffff800000000() page dumped because: nonzero _count Modules linked in: qla2xxx(OE+) nvme_fc nvme_fabrics nvme_core scsi_transport_fc scsi_tgt nls_utf8 isofs ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter nx_crypto ses enclosure scsi_transport_sas pseries_rng sg ip_tables xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_generic crct10dif_common usb_storage ipr libata tg3 ptp pps_core dm_mirror dm_region_hash dm_log dm_mod CPU: 32 PID: 8560 Comm: insmod Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.ppc64 #1 Call Trace: [c0000006dd7caa70] [c00000000001cca8] .show_stack+0x88/0x330 (unreliable) [c0000006dd7cab30] [c000000000ac3d88] .dump_stack+0x28/0x3c [c0000006dd7caba0] [c00000000029e48c] .bad_page+0x15c/0x1c0 [c0000006dd7cac40] [c00000000029f938] .get_page_from_freelist+0x11e8/0x1ea0 [c0000006dd7caf40] [c0000000002a1d30] .__alloc_pages_nodemask+0x1c0/0xc70 [c0000006dd7cb140] [c00000000002ba0c] .__dma_direct_alloc_coherent+0x8c/0x170 [c0000006dd7cb1e0] [d000000010a94688] .qla2x00_mem_alloc+0x10f8/0x1370 [qla2xxx] [c0000006dd7cb2d0] [d000000010a9c790] .qla2x00_probe_one+0xb60/0x22e0 [qla2xxx] [c0000006dd7cb540] [c0000000005de764] .pci_device_probe+0x204/0x300 [c0000006dd7cb600] [c0000000006ca61c] .driver_probe_device+0x2cc/0x6f0 [c0000006dd7cb6b0] [c0000000006cabec] .__driver_attach+0x10c/0x110 [c0000006dd7cb740] [c0000000006c5f04] .bus_for_each_dev+0x94/0x100 [c0000006dd7cb7e0] [c0000000006c94f4] .driver_attach+0x34/0x50 [c0000006dd7cb860] [c0000000006c8f58] .bus_add_driver+0x298/0x3b0 [c0000006dd7cb900] [c0000000006cb6e0] .driver_register+0xb0/0x1a0 [c0000006dd7cb980] [c0000000005dc474] .__pci_register_driver+0xc4/0xf0 [c0000006dd7cba10] [d000000010b94e20] .qla2x00_module_init+0x2a8/0x328 [qla2xxx] [c0000006dd7cbaa0] [c00000000000c130] .do_one_initcall+0x130/0x2e0 [c0000006dd7cbb50] [c0000000001b2e8c] .load_module+0x1afc/0x2340 [c0000006dd7cbd40] [c0000000001b3920] .SyS_finit_module+0xd0/0x130 [c0000006dd7cbe30] [c00000000000a284] system_call+0x38/0xfc Link: https://lore.kernel.org/r/20201202132312.19966-9-njavali@marvell.com Fixes: 9f2475fe7406 ("scsi: qla2xxx: SAN congestion management implementation") Fixes: cf3c54fb49a4 ("scsi: qla2xxx: Add SLER and PI control support”) Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Fix crash during driver load on big endian machinesArun Easi
Crash stack: [576544.715489] Unable to handle kernel paging request for data at address 0xd00000000f970000 [576544.715497] Faulting instruction address: 0xd00000000f880f64 [576544.715503] Oops: Kernel access of bad area, sig: 11 [#1] [576544.715506] SMP NR_CPUS=2048 NUMA pSeries : [576544.715703] NIP [d00000000f880f64] .qla27xx_fwdt_template_valid+0x94/0x100 [qla2xxx] [576544.715722] LR [d00000000f7952dc] .qla24xx_load_risc_flash+0x2fc/0x590 [qla2xxx] [576544.715726] Call Trace: [576544.715731] [c0000004d0ffb000] [c0000006fe02c350] 0xc0000006fe02c350 (unreliable) [576544.715750] [c0000004d0ffb080] [d00000000f7952dc] .qla24xx_load_risc_flash+0x2fc/0x590 [qla2xxx] [576544.715770] [c0000004d0ffb170] [d00000000f7aa034] .qla81xx_load_risc+0x84/0x1a0 [qla2xxx] [576544.715789] [c0000004d0ffb210] [d00000000f79f7c8] .qla2x00_setup_chip+0xc8/0x910 [qla2xxx] [576544.715808] [c0000004d0ffb300] [d00000000f7a631c] .qla2x00_initialize_adapter+0x4dc/0xb00 [qla2xxx] [576544.715826] [c0000004d0ffb3e0] [d00000000f78ce28] .qla2x00_probe_one+0xf08/0x2200 [qla2xxx] Link: https://lore.kernel.org/r/20201202132312.19966-8-njavali@marvell.com Fixes: f73cb695d3ec ("[SCSI] qla2xxx: Add support for ISP2071.") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Fix compilation issue in PPC systemsArun Easi
Fix compile time errors reported on PPC systems, qla_gbl.h:991:20: error: inlining failed in call to always_inline ‘qla_nvme_abort_set_option’: function body not available Link: https://lore.kernel.org/r/20201202132312.19966-7-njavali@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Don't check for fw_started while posting NVMe commandSaurav Kashyap
NVMe commands can come only after successful addition of rport and NVMe connect, and rport is only registered after FW started bit is set. Remove the redundant check. Link: https://lore.kernel.org/r/20201202132312.19966-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Tear down session if FW say it is downQuinn Tran
The completion status 0x28 (ppc = be = 0x2800) below indicates session is not there, trigger session deletion. qla2xxx [000b:04:00.1]-8009:8: DEVICE RESET ISSUED nexus=8:1:51 cmd=c000001432d0f600. qla2xxx [000b:04:00.1]-5039:8: Async-tmf error - hdl=67b completion status(2800). qla2xxx [000b:04:00.1]-8030:8: TM IOCB failed (102). qla2xxx [000b:04:00.1]-800c:8: do_reset failed for cmd=c000001432d0f600. qla2xxx [000b:04:00.1]-800f:8: DEVICE RESET FAILED: Task management failed nexus=8:1:51 cmd=c000001432d0f600. qla2xxx [000b:04:00.1]-8009:8: DEVICE RESET ISSUED nexus=8:1:52 cmd=c000001432d0c200. qla2xxx [000b:04:00.1]-5039:8: Async-tmf error - hdl=67c completion status(2800). qla2xxx [000b:04:00.1]-8030:8: TM IOCB failed (102). Link: https://lore.kernel.org/r/20201202132312.19966-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Limit interrupt vectors to number of CPUsQuinn Tran
Driver created too many QPairs(126) with 28xx adapter. Limit to the number of CPUs to minimize wasted resources. Link: https://lore.kernel.org/r/20201202132312.19966-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Change post del message from debug level to log levelSaurav Kashyap
Change the message debug level. Link: https://lore.kernel.org/r/20201202132312.19966-3-njavali@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla2xxx: Return EBUSY on fcport deletionDaniel Wagner
When the fcport is about to be deleted we should return EBUSY instead of ENODEV. Only for EBUSY will the request be requeued in a multipath setup. Also return EBUSY when the firmware has not yet started to avoid dropping the request. Link: https://lore.kernel.org/r/20201014073048.36219-1-dwagner@suse.de Link: https://lore.kernel.org/r/20201202132312.19966-2-njavali@marvell.com Reviewed-by: Arun Easi <aeasi@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla4xxx: Remove redundant assignment to variable rvalColin Ian King
The variable rval is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Link: https://lore.kernel.org/r/20201204191810.1150995-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unused value")
2020-12-09ice: Add space to unknown speedSimon Perron Caissy
Add space to the end of 'Unknown' string in order to avoid concatenation with 'bps' string when formatting netdev log message. Signed-off-by: Simon Perron Caissy <simon.perron.caissy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: join format strings to same line as ice_debugJacob Keller
When printing messages with ice_debug, align the printed string to the origin line of the message in order to ease debugging and tracking messages back to their source. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: silence static analysis warningBruce Allan
sparse warns about cast to/from restricted types which is not an actual problem; silence the warning. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: cleanup misleading commentBruce Allan
The maximum Admin Queue buffer size and NVM shadow RAM sector size are both 4 Kilobytes. Some comments refer to those as 4Kb which can be confused with 4 Kilobits. Update the comments to use the commonly used KB symbol instead. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: Remove vlan_ena from vsi structureNick Nunley
vlan_ena was introduced to track whether VLAN filters are enabled on the device, but 1) checking for num_vlan > 1 already gives us this information, and is currently used in this way throughout the code 2) the logic for vlan_ena is broken when multiple VLANs are active Just remove vlan_ena and use num_vlan instead. Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: Remove gate to OROM initJeb Cramer
Remove the gate that prevents the OROM and netlist info from being populated. The NVM now has the appropriate section for software to reference the versioning info. Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: Enable Support for FW Override (E82X)Jeb Cramer
The driver is able to override the firmware when it comes to supporting a more lenient link mode. This feature was limited to E810 devices. It is now extended to E82X devices. Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: don't always return an error for Get PHY Abilities AQ commandPaul M Stillwell Jr
There are times when the driver shouldn't return an error when the Get PHY abilities AQ command (0x0600) returns an error. Instead the driver should log that the error occurred and continue on. This allows the driver to load even though the AQ command failed. The user can then later determine the reason for the failure and correct it. Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09ice: cleanup stack hogBruce Allan
In ice_flow_add_prof_sync(), struct ice_flow_prof_params has recently grown in size hogging stack space when allocated there. Hogging stack space should be avoided. Change allocation to be on the heap when needed. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Harikumar Bokkena <harikumarx.bokkena@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-09netdevsim: Add debugfs toggle to reject BPF programs in verifierToke Høiland-Jørgensen
This adds a new debugfs toggle ('bpf_bind_verifier_accept') that can be used to make netdevsim reject BPF programs from being accepted by the verifier. If this toggle (which defaults to true) is set to false, nsim_bpf_verify_insn() will return EOPNOTSUPP on the last instruction (after outputting the 'Hello from netdevsim' verifier message). This makes it possible to check the verification callback in the driver from test_offload.py in selftests, since the verifier now clears the verifier log on a successful load, hiding the message from the driver. Fixes: 6f8a57ccf851 ("bpf: Make verifier log more relevant by default") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752225964.110217.12584017165318065332.stgit@toke.dk
2020-12-09xdp: Remove the xdp_attachment_flags_ok() callbackToke Høiland-Jørgensen
Since commit 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device"), the XDP program attachment info is now maintained in the core code. This interacts badly with the xdp_attachment_flags_ok() check that prevents unloading an XDP program with different load flags than it was loaded with. In practice, two kinds of failures are seen: - An XDP program loaded without specifying a mode (and which then ends up in driver mode) cannot be unloaded if the program mode is specified on unload. - The dev_xdp_uninstall() hook always calls the driver callback with the mode set to the type of the program but an empty flags argument, which means the flags_ok() check prevents the program from being removed, leading to bpf prog reference leaks. The original reason this check was added was to avoid ambiguity when multiple programs were loaded. With the way the checks are done in the core now, this is quite simple to enforce in the core code, so let's add a check there and get rid of the xdp_attachment_flags_ok() callback entirely. Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752225751.110217.10267659521308669050.stgit@toke.dk
2020-12-09PCI: qcom: Add support for configuring BDF to SID mapping for SM8250Manivannan Sadhasivam
For SM8250, we need to write the BDF to SID mapping in PCIe controller register space for proper working. This is accomplished by extracting the BDF and SID values from "iommu-map" property in DT and writing those in the register address calculated from the hash value of BDF. In case of collisions, the index of the next entry will also be written. For the sake of it, let's introduce a "config_sid" callback and do it conditionally for SM8250. Link: https://lore.kernel.org/r/20201208121402.178011-4-mani@kernel.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-09drm/amdgpu: Initialise drm_gem_object_funcs for imported BOsAndrey Grodzovsky
For BOs imported from outside of amdgpu, setting of amdgpu_gem_object_funcs was missing in amdgpu_dma_buf_create_obj. Fix by refactoring BO creation and amdgpu_gem_object_funcs setting into single function called from both code paths. Fixes: d693def4fd1c ("drm: Remove obsolete GEM and PRIME callbacks from struct drm_driver") v2: Use use amdgpu_gem_object_create() directly v3: fix warning Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-09drm/amdgpu: fix size calculation with stolen vga memoryAlex Deucher
If we need to keep the stolen vga memory, make sure it is at least as big as the legacy vga size. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-12-09drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for ravenChangfeng
When using old WORKLOAD_PPLIB setting in smu10.h, there is problem that it can't be able to switch to mak gpu clk during compute workload. It needs to update WORKLOAD_PPLIB setting to fix this issue. Signed-off-by: Changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-12-09drm/amdkfd: Fix leak in dmabuf importFelix Kuehling
Release dmabuf reference before returning from kfd_ioctl_import_dmabuf. amdgpu_amdkfd_gpuvm_import_dmabuf takes a reference to the underlying GEM BO and doesn't keep the reference to the dmabuf wrapper. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-15 11:22:37 +0000