| Age | Commit message (Collapse) | Author |
|---|
|
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then.
Fixes: 9e25450da700 ("ionic: add private workqueue per-device")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If register_netdev() fails, then the driver leaks the netdev notifier.
Fix this by calling ionic_lif_unregister() on register_netdev()
failure. This will also call ionic_lif_unregister_phc() if it has
already been registered.
Fixes: 30b87ab4c0b3 ("ionic: remove lif list concept")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If either a zero count or a large one is provided, kernel can crash.
Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters")
Reported-by: syzbot+ea40e4294e58b0292f74@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/675c6862.050a0220.37aaf.00b1.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213172518.2415666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Packets injected by the CPU should have a SRC_PORT field equal to the
CPU port module index in the Analyzer block (ocelot->num_phys_ports).
The blamed commit copied the ocelot_ifh_set_basic() call incorrectly
from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling
with "x", it calls with BIT_ULL(x), but the field is not a port mask,
but rather a single port index.
[ side note: this is the technical debt of code duplication :( ]
The error used to be silent and doesn't appear to have other
user-visible manifestations, but with new changes in the packing
library, it now fails loudly as follows:
------------[ cut here ]------------
Cannot store 0x40 inside bits 46-43 - will truncate
sja1105 spi2.0: xmit timed out
WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198
sja1105 spi2.0: timed out polling for tstamp
CPU: 1 UID: 0 PID: 102 Comm: felix_xmit
Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605
Call trace:
__pack+0x90/0x198 (P)
__pack+0x90/0x198 (L)
packing+0x78/0x98
ocelot_ifh_set_basic+0x260/0x368
ocelot_port_inject_frame+0xa8/0x250
felix_port_deferred_xmit+0x14c/0x258
kthread_worker_fn+0x134/0x350
kthread+0x114/0x138
The code path pertains to the ocelot switchdev driver and to the felix
secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q.
The messenger (packing) is not really to blame, so fix the original
commit instead.
Fixes: e1b9e80236c5 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Make sure amd64_edac loads successfully on certain Zen4 memory
configurations
* tag 'edac_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Simplify ECC check on unified memory controllers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Disable the secure programming interface of the GIC500 chip in the
RK3399 SoC to fix interrupt priority assignment and even make a dead
machine boot again when the gic-v3 driver enables pseudo NMIs
- Correct the declaration of a percpu variable to fix several sparse
warnings
* tag 'irq_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Work around insecure GIC integrations
irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Single one-line fix in the ufs driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Update compl_time_stamp_local_clock after completing a cqe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues.
Included in here are:
- typec driver bugfixes
- u_serial gadget driver bugfix for much reported and discussed issue
- dwc2 bugfixes
- midi gadget driver bugfix
- ehci-hcd driver bugfix
- other small bugfixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix connector status writing past buffer size
usb: typec: ucsi: Fix completion notifications
usb: dwc2: Fix HCD port connection race
usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature
usb: dwc2: Fix HCD resume
usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer
usb: misc: onboard_usb_dev: skip suspend/resume sequence for USB5744 SMBus support
usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only mode
usb: core: hcd: only check primary hcd skip_phy_initialization
usb: gadget: midi2: Fix interpretation of is_midi1 bits
usb: dwc3: imx8mp: fix software node kernel dump
usb: typec: anx7411: fix OF node reference leaks in anx7411_typec_switch_probe()
usb: typec: anx7411: fix fwnode_handle reference leak
usb: host: max3421-hcd: Correctly abort a USB request.
dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml
usb: ehci-hcd: fix call balance of clocks handling routines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two small serial driver fixes for 6.13-rc3. They are:
- ioport build fallout fix for the 8250 port driver that should
resolve Guenter's runtime problems
- sh-sci driver bugfix for a reported problem
Both of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: Work around warning backtrace in serial8250_set_defaults
serial: sh-sci: Check if TX data was written to device in .tx_empty()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging gpib driver build and bugfixes for issues
that have been much-reported (should finally fix Guenter's build
issues). There are more of these coming in later -rc releases, but for
now this should fix the majority of the reported problems.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix i386 build issue
staging: gpib: Fix faulty workaround for assignment in if
staging: gpib: Workaround for ppc build failure
staging: gpib: Make GPIB_NI_PCI_ISA depend on HAS_IOPORT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a regression in rsassa-pkcs1 as well as a buffer overrun in
hisilicon/debugfs"
* tag 'v6.13-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon/debugfs - fix the struct pointer incorrectly offset problem
crypto: rsassa-pkcs1 - Copy source data for SG list
|
|
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Set bindgen's Rust target version to prevent issues when
pairing older rustc releases with newer bindgen releases,
such as bindgen >= 0.71.0 and rustc < 1.82 due to
unsafe_extern_blocks.
drm/panic:
- Remove spurious empty line detected by a new Clippy warning"
* tag 'rust-fixes-6.13' of https://github.com/Rust-for-Linux/linux:
rust: kbuild: set `bindgen`'s Rust target version
drm/panic: remove spurious empty line to clean warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Per-domain device-list locking fixes for the AMD IOMMU driver
- Fix incorrect use of smp_processor_id() in the NVidia-specific part
of the ARM-SMMU-v3 driver
- Intel IOMMU driver fixes:
- Remove cache tags before disabling ATS
- Avoid draining PRQ in sva mm release path
- Fix qi_batch NULL pointer with nested parent domain
* tag 'iommu-fixes-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Avoid draining PRQ in sva mm release path
iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain
iommu/vt-d: Remove cache tags before disabling ATS
iommu/amd: Add lockdep asserts for domain->dev_list
iommu/amd: Put list_add/del(dev_data) back under the domain->lock
iommu/tegra241-cmdqv: do not use smp_processor_id in preemptible context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix an OF node reference leak in the sata_highbank driver
* tag 'ata-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys()
|
|
syzbot reported the following crash [1]
Issue came with the blamed commit. Instead of going through
all the iov components, we keep using the first one
and end up with a malformed skb.
[1]
kernel BUG at net/core/skbuff.c:2849 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848
Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293
RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00
RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000
RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c
R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50
R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80
FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284
tipc_aead_decrypt net/tipc/crypto.c:894 [inline]
tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844
tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109
tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668
__netif_receive_skb_list_ptype net/core/dev.c:5720 [inline]
__netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762
__netif_receive_skb_list net/core/dev.c:5814 [inline]
netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905
gro_normal_list include/net/gro.h:515 [inline]
napi_complete_done+0x2b5/0x870 net/core/dev.c:6256
napi_complete include/linux/netdevice.h:567 [inline]
tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982
tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057
do_iter_readv_writev+0x600/0x880
vfs_writev+0x376/0xba0 fs/read_write.c:1050
do_writev+0x1b6/0x360 fs/read_write.c:1096
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: de4f5fed3f23 ("iov_iter: add iter_iovec() helper")
Reported-by: syzbot+4f66250f6663c0c1d67e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/675b61aa.050a0220.599f4.00bb.GAE@google.com/T/#u
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20241212222247.724674-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fairly small fixes for v6.13, the most substatial one being
disabling STIG mode for Cadence QSPI controllers on Altera SoCFPGA
platforms since it doesn't work"
* tag 'spi-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence-qspi: Disable STIG mode for Altera SoCFPGA.
spi: rockchip: Fix PM runtime count on no-op cs
spi: aspeed: Fix an error handling path in aspeed_spi_[read|write]_user()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of additional changes, one ensuring we give AXP717 enough
time to stabilise after changing voltages which fixes serious
stability issues on some platforms and another documenting the DT
support required for the Qualcomm WCN6750"
* tag 'regulator-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: set ramp_delay
regulator: dt-bindings: qcom,qca6390-pmu: document wcn6750-pmu
|
|
Pull drm fixes from Dave Airlie:
"This is the weekly fixes pull for drm. Just has i915, xe and amdgpu
changes in it. Nothing too major in here:
i915:
- Don't use indexed register writes needlessly [dsb]
- Stop using non-posted DSB writes for legacy LUT [color]
- Fix NULL pointer dereference in capture_engine
- Fix memory leak by correcting cache object name in error handler
xe:
- Fix a KUNIT test error message (Mirsad Todorovac)
- Fix an invalidation fence PM ref leak (Daniele)
- Fix a register pool UAF (Lucas)
amdgpu:
- ISP hw init fix
- SR-IOV fixes
- Fix contiguous VRAM mapping for UVD on older GPUs
- Fix some regressions due to drm scheduler changes
- Workload profile fixes
- Cleaner shader fix
amdkfd:
- Fix DMA map direction for migration
- Fix a potential null pointer dereference
- Cacheline size fixes
- Runtime PM fix"
* tag 'drm-fixes-2024-12-14' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/reg_sr: Remove register pool
drm/xe: Call invalidation_fence_fini for PT inval fences in error state
drm/xe: fix the ERR_PTR() returned on failure to allocate tiny pt
drm/amdkfd: pause autosuspend when creating pdd
drm/amdgpu: fix when the cleaner shader is emitted
drm/amdgpu: Fix ISP HW init issue
drm/amdkfd: hard-code MALL cacheline size for gfx11, gfx12
drm/amdkfd: hard-code cacheline size for gfx11
drm/amdkfd: Dereference null return value
drm/i915: Fix memory leak by correcting cache object name in error handler
drm/i915: Fix NULL pointer dereference in capture_engine
drm/i915/color: Stop using non-posted DSB writes for legacy LUT
drm/i915/dsb: Don't use indexed register writes needlessly
drm/amdkfd: Correct the migration DMA map direction
drm/amd/pm: Set SMU v13.0.7 default workload type
drm/amd/pm: Initialize power profile mode
amdgpu/uvd: get ring reference from rq scheduler
drm/amdgpu: fix UVD contiguous CS mapping problem
drm/amdgpu: use sjt mec fw on gfx943 for sriov
Revert "drm/amdgpu: Fix ISP hw init issue"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two coding mistakes, one in the ACPI resources handling code
and one in ACPICA:
- Relocate the addr->info.mem.caching check in acpi_decode_space() to
only execute it if the resource is of the correct type (Ilpo
Järvinen)
- Don't release a context_mutex that was never acquired in
acpi_remove_address_space_handler() (Daniil Tatianin)"
* tag 'acpi-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: events/evxfregn: don't release the ContextMutex that was never acquired
ACPI: resource: Fix memory resource type union access
|
|
Pull block fixes from Jens Axboe:
- Series from Damien fixing issues with the zoned write plugging
- Fix for a potential UAF in block cgroups
- Fix deadlock around queue freezing and the sysfs lock
- Various little cleanups and fixes
* tag 'block-6.13-20241213' of git://git.kernel.dk/linux:
block: Fix potential deadlock while freezing queue and acquiring sysfs_lock
block: Fix queue_iostats_passthrough_show()
blk-mq: Clean up blk_mq_requeue_work()
mq-deadline: Remove a local variable
blk-iocost: Avoid using clamp() on inuse in __propagate_weights()
block: Make bio_iov_bvec_set() accept pointer to const iov_iter
block: get wp_offset by bdev_offset_from_zone_start
blk-cgroup: Fix UAF in blkcg_unpin_online()
MAINTAINERS: update Coly Li's email address
block: Prevent potential deadlocks in zone write plug error recovery
dm: Fix dm-zoned-reclaim zone write pointer alignment
block: Ignore REQ_NOWAIT for zone reset and zone finish operations
block: Use a zone write plug BIO work for REQ_NOWAIT BIOs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Ira Weiny:
- sysbot fix for out of bounds access
* tag 'libnvdimm-fixes-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi: nfit: vmalloc-out-of-bounds Read in acpi_nfit_ctl
|
|
drm_mode_vrefresh() is trying to avoid divide by zero
by checking whether htotal or vtotal are zero. But we may
still end up with a div-by-zero of vtotal*htotal*...
Cc: stable@vger.kernel.org
Reported-by: syzbot+622bba18029bcde672e1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=622bba18029bcde672e1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129042629.18280-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Merge an ACPICA fix for 6.13-rc3:
- Don't release a context_mutex that was never acquired in
acpi_remove_address_space_handler() (Daniil Tatianin).
* acpica:
ACPICA: events/evxfregn: don't release the ContextMutex that was never acquired
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix several low-level issues in gpio-graniterapids
- fix an initialization order issue that manifests itself with
__counted_by() checks in gpio-ljca
- don't default to y for CONFIG_GPIO_MVEBU with COMPILE_TEST enabled
- move the DEFAULT_SYMBOL_NAMESPACE define before the export.h include
in gpio-idio-16
* tag 'gpio-fixes-for-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: idio-16: Actually make use of the GPIO_IDIO_16 symbol namespace
gpio: graniterapids: Fix GPIO Ack functionality
gpio: graniterapids: Check if GPIO line can be used for IRQs
gpio: graniterapids: Determine if GPIO pad can be used by driver
gpio: graniterapids: Fix invalid RXEVCFG register bitmask
gpio: graniterapids: Fix invalid GPI_IS register offset
gpio: graniterapids: Fix incorrect BAR assignment
gpio: graniterapids: Fix vGPIO driver crash
gpio: ljca: Initialize num before accessing item in ljca_gpio_config
gpio: GPIO_MVEBU should not default to y when compile-testing
|
|
It appears that the relatively popular RK3399 SoC has been put together
using a large amount of illicit substances, as experiments reveal that its
integration of GIC500 exposes the *secure* programming interface to
non-secure.
This has some pretty bad effects on the way priorities are handled, and
results in a dead machine if booting with pseudo-NMI enabled
(irqchip.gicv3_pseudo_nmi=1) if the kernel contains 18fdb6348c480 ("arm64:
irqchip/gic-v3: Select priorities at boot time"), which relies on the
priorities being programmed using the NS view.
Let's restore some sanity by going one step further and disable security
altogether in this case. This is not any worse, and puts us in a mode where
priorities actually make some sense.
Huge thanks to Mark Kettenis who initially identified this issue on
OpenBSD, and to Chen-Yu Tsai who reported the problem in Linux.
Fixes: 18fdb6348c480 ("arm64: irqchip/gic-v3: Select priorities at boot time")
Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Reported-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241213141037.3995049-1-maz@kernel.org
|
|
percpu_base is used in various percpu functions that expect variable in
__percpu address space. Correct the declaration of percpu_base to
void __iomem * __percpu *percpu_base;
to declare the variable as __percpu pointer.
The patch fixes several sparse warnings:
irq-gic.c:1172:44: warning: incorrect type in assignment (different address spaces)
irq-gic.c:1172:44: expected void [noderef] __percpu *[noderef] __iomem *percpu_base
irq-gic.c:1172:44: got void [noderef] __iomem *[noderef] __percpu *
...
irq-gic.c:1231:43: warning: incorrect type in argument 1 (different address spaces)
irq-gic.c:1231:43: expected void [noderef] __percpu *__pdata
irq-gic.c:1231:43: got void [noderef] __percpu *[noderef] __iomem *percpu_base
There were no changes in the resulting object files.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20241213145809.2918-2-ubizjak@gmail.com
|
|
Instead of returning a generic NULL on error from
drm_dp_tunnel_mgr_create(), use error pointers with informative codes
to align the function with stub that is executed when
CONFIG_DRM_DISPLAY_DP_TUNNEL is unset. This will also trigger IS_ERR()
in current caller (intel_dp_tunnerl_mgr_init()) instead of bypassing it
via NULL pointer.
v2: use error codes inside drm_dp_tunnel_mgr_create() instead of handling
on caller's side (Michal, Imre)
v3: fixup commit message and add "CC"/"Fixes" lines (Andi),
mention aligning function code with stub
Fixes: 91888b5b1ad2 ("drm/i915/dp: Add support for DP tunnel BW allocation")
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7q4fpnmmztmchczjewgm6igy55qt6jsm7tfd4fl4ucfq6yg2oy@q4lxtsu6445c
|
|
With KASAN enabled, clang fails to optimize the inline version of
vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes
of temporary values spilled to the stack:
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than]
This seems to affect all versions of clang including the latest (clang-20),
but the degree of stack overhead is different per release.
Marking the function as noinline_for_stack is harmless here and avoids
the problem completely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When a PASID is used for SVA by a device, it's possible that the PASID
entry is cleared before the device flushes all ongoing DMA requests and
removes the SVA domain. This can occur when an exception happens and the
process terminates before the device driver stops DMA and calls the
iommu driver to unbind the PASID.
There's no need to drain the PRQ in the mm release path. Instead, the PRQ
will be drained in the SVA unbind path.
Unfortunately, commit c43e1ccdebf2 ("iommu/vt-d: Drain PRQs when domain
removed from RID") changed this behavior by unconditionally draining the
PRQ in intel_pasid_tear_down_entry(). This can lead to a potential
sleeping-in-atomic-context issue.
Smatch static checker warning:
drivers/iommu/intel/prq.c:95 intel_iommu_drain_pasid_prq()
warn: sleeping in atomic context
To avoid this issue, prevent draining the PRQ in the SVA mm release path
and restore the previous behavior.
Fixes: c43e1ccdebf2 ("iommu/vt-d: Drain PRQs when domain removed from RID")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-iommu/c5187676-2fa2-4e29-94e0-4a279dc88b49@stanley.mountain/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241212021529.1104745-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The qi_batch is allocated when assigning cache tag for a domain. While
for nested parent domain, it is missed. Hence, when trying to map pages
to the nested parent, NULL dereference occurred. Also, there is potential
memleak since there is no lock around domain->qi_batch allocation.
To solve it, add a helper for qi_batch allocation, and call it in both
the __cache_tag_assign_domain() and __cache_tag_assign_parent_domain().
BUG: kernel NULL pointer dereference, address: 0000000000000200
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8104795067 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 223 UID: 0 PID: 4357 Comm: qemu-system-x86 Not tainted 6.13.0-rc1-00028-g4b50c3c3b998-dirty #2632
Call Trace:
? __die+0x24/0x70
? page_fault_oops+0x80/0x150
? do_user_addr_fault+0x63/0x7b0
? exc_page_fault+0x7c/0x220
? asm_exc_page_fault+0x26/0x30
? cache_tag_flush_range_np+0x13c/0x260
intel_iommu_iotlb_sync_map+0x1a/0x30
iommu_map+0x61/0xf0
batch_to_domain+0x188/0x250
iopt_area_fill_domains+0x125/0x320
? rcu_is_watching+0x11/0x50
iopt_map_pages+0x63/0x100
iopt_map_common.isra.0+0xa7/0x190
iopt_map_user_pages+0x6a/0x80
iommufd_ioas_map+0xcd/0x1d0
iommufd_fops_ioctl+0x118/0x1c0
__x64_sys_ioctl+0x93/0xc0
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 705c1cdf1e73 ("iommu/vt-d: Introduce batched cache invalidation")
Cc: stable@vger.kernel.org
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241210130322.17175-1-yi.l.liu@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The current implementation removes cache tags after disabling ATS,
leading to potential memory leaks and kernel crashes. Specifically,
CACHE_TAG_DEVTLB type cache tags may still remain in the list even
after the domain is freed, causing a use-after-free condition.
This issue really shows up when multiple VFs from different PFs
passed through to a single user-space process via vfio-pci. In such
cases, the kernel may crash with kernel messages like:
BUG: kernel NULL pointer dereference, address: 0000000000000014
PGD 19036a067 P4D 1940a3067 PUD 136c9b067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 74 UID: 0 PID: 3183 Comm: testCli Not tainted 6.11.9 #2
RIP: 0010:cache_tag_flush_range+0x9b/0x250
Call Trace:
<TASK>
? __die+0x1f/0x60
? page_fault_oops+0x163/0x590
? exc_page_fault+0x72/0x190
? asm_exc_page_fault+0x22/0x30
? cache_tag_flush_range+0x9b/0x250
? cache_tag_flush_range+0x5d/0x250
intel_iommu_tlb_sync+0x29/0x40
intel_iommu_unmap_pages+0xfe/0x160
__iommu_unmap+0xd8/0x1a0
vfio_unmap_unpin+0x182/0x340 [vfio_iommu_type1]
vfio_remove_dma+0x2a/0xb0 [vfio_iommu_type1]
vfio_iommu_type1_ioctl+0xafa/0x18e0 [vfio_iommu_type1]
Move cache_tag_unassign_domain() before iommu_disable_pci_caps() to fix
it.
Fixes: 3b1d9e2b2d68 ("iommu/vt-d: Add cache tag assignment interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241129020506.576413-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.13
A single fix to address a possible race around setting ffa_dev->properties
in ffa_device_register() by updating ffa_device_register() to take all
the partition information received from the firmware and updating the
struct ffa_device accordingly before registering the device to the
bus/driver model in the kernel.
* tag 'ffa-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
Link: https://lore.kernel.org/r/20241210101113.3232602-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The shutdown function can be called when the display is already
unprepared. For example during reboot this trigger a kernel
backlog. Calling the drm_panel_unprepare, allow us to avoid
to trigger the kernel warning.
Fixes: 2e87bad7cd33 ("drm/panel: Add Synaptics R63353 panel driver")
Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20241205163002.1804784-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241205163002.1804784-1-dario.binacchi@amarulasolutions.com
|
|
The DSI host must be enabled for the panel to be initialized in
prepare(). Set the prepare_prev_first flag to guarantee this.
This fixes the panel operation on NXP i.MX8MP SoC / Samsung DSIM
DSI host.
Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20241124224812.150263-1-marex@denx.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241124224812.150263-1-marex@denx.de
|
|
mipi_dsi_device_register_full() never returns NULL pointer, it
will return ERR_PTR() when it fails, so replace the check with
IS_ERR().
Fixes: 623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241029123957.1588-1-yangyingliang@huaweicloud.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029123957.1588-1-yangyingliang@huaweicloud.com
|
|
drm_mode_duplicate() could return NULL due to lack of memory,
which will then call NULL pointer dereference. Add a check to
prevent it.
Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver")
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241025073408.27481-3-zhangzekun11@huawei.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025073408.27481-3-zhangzekun11@huawei.com
|
|
When removing a netfront device directly after a suspend/resume cycle
it might happen that the queues have not been setup again, causing a
crash during the attempt to stop the queues another time.
Fix that by checking the queues are existing before trying to stop
them.
This is XSA-465 / CVE-2024-53240.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: d50b7914fae0 ("xen-netfront: Fix NULL sring after live migration")
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
esre_attribute::store() is not needed since commit af97a77bc01c (efi:
Move some sysfs files to be read-only by root). Drop it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2024-12-11:
amdgpu:
- ISP hw init fix
- SR-IOV fixes
- Fix contiguous VRAM mapping for UVD on older GPUs
- Fix some regressions due to drm scheduler changes
- Workload profile fixes
- Cleaner shader fix
amdkfd:
- Fix DMA map direction for migration
- Fix a potential null pointer dereference
- Cacheline size fixes
- Runtime PM fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211215449.741848-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix a KUNIT test error message (Mirsad Todorovac)
- Fix an invalidation fence PM ref leak (Daniele)
- Fix a register pool UAF (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z1s5elHXOyeIHnE0@fedora
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth:
- stmmac: fix TSO DMA API mis-usage causing oops
- bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops
due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not
supported"
* tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: dsa: tag_ocelot_8021q: fix broken reception
net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
net: renesas: rswitch: fix initial MPIC register setting
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
team: Fix initial vlan_feature set in __team_compute_features
bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features
net, team, bonding: Add netdev_base_features helper
net/sched: netem: account for backlog updates from child qdisc
net: dsa: felix: fix stuck CPU-injected packets with short taprio windows
splice: do not checksum AF_UNIX sockets
net: usb: qmi_wwan: add Telit FE910C04 compositions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes
Arm SMMU fixes for 6.13-rc
- Use raw_smp_processor_id() when balancing traffic for NVIDIA's custom
command queue implementation.
|
|
That pool implementation doesn't really work: if the krealloc happens to
move the memory and return another address, the entries in the xarray
become invalid, leading to use-after-free later:
BUG: KASAN: slab-use-after-free in xe_reg_sr_apply_mmio+0x570/0x760 [xe]
Read of size 4 at addr ffff8881244b2590 by task modprobe/2753
Allocated by task 2753:
kasan_save_stack+0x39/0x70
kasan_save_track+0x14/0x40
kasan_save_alloc_info+0x37/0x60
__kasan_kmalloc+0xc3/0xd0
__kmalloc_node_track_caller_noprof+0x200/0x6d0
krealloc_noprof+0x229/0x380
Simplify the code to fix the bug. A better pooling strategy may be added
back later if needed.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209232739.147417-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit e5283bd4dfecbd3335f43b62a68e24dae23f59e4)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Invalidation_fence_init takes a PM reference, which is released in its
_fini counterpart, so we need to make sure that the latter is called,
even if the fence is in an error state.
Since we already have a function that calls _fini() and signals the
fence in the tlb inval code, we can expose that and call it from the PT
code.
Fixes: f002702290fc ("drm/xe: Hold a PM ref when GT TLB invalidations are inflight")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org> # v6.11+
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206015022.1567113-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 65338639b79ce88aef5263cd518cde570a3c7c8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Running coccinelle spatch gave the following warning:
./drivers/gpu/drm/xe/tests/xe_migrate.c:226:5-11: inconsistent IS_ERR
and PTR_ERR on line 228.
The code reports PTR_ERR(pt) when IS_ERR(tiny) is checked:
→ 211 pt = xe_bo_create_pin_map(xe, tile, m->q->vm, XE_PAGE_SIZE,
212 ttm_bo_type_kernel,
213 XE_BO_FLAG_VRAM_IF_DGFX(tile) |
214 XE_BO_FLAG_PINNED);
215 if (IS_ERR(pt)) {
216 KUNIT_FAIL(test, "Failed to allocate fake pt: %li\n",
217 PTR_ERR(pt));
218 goto free_big;
219 }
220
221 tiny = xe_bo_create_pin_map(xe, tile, m->q->vm,
→ 222 2 * SZ_4K,
223 ttm_bo_type_kernel,
224 XE_BO_FLAG_VRAM_IF_DGFX(tile) |
225 XE_BO_FLAG_PINNED);
→ 226 if (IS_ERR(tiny)) {
→ 227 KUNIT_FAIL(test, "Failed to allocate fake pt: %li\n",
→ 228 PTR_ERR(pt));
229 goto free_pt;
230 }
Now, the IS_ERR(tiny) and the corresponding PTR_ERR(pt) do not match.
Returning PTR_ERR(tiny), as the last failed function call, seems logical.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241121212057.1526634-2-mtodorovac69@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit cb57c75098c1c449a007ba301f9073f96febaaa9)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- SCO: Fix transparent voice setting
- ISO: Locking fixes
- hci_core: Fix sleeping function called from invalid context
- hci_event: Fix using rcu_read_(un)lock while iterating
- btmtk: avoid UAF in btmtk_process_coredump
* tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
Bluetooth: Improve setsockopt() handling of malformed user input
====================
Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 8d7ae22ae9f8 ("net: dsa: microchip: KSZ9477 register regmap
alignment to 32 bit boundaries") fixed an issue whereby regmap_reg_range
did not allow writes as 32 bit words to KSZ9477 PHY registers, this fix
for KSZ9896 is adapted from there as the same errata is present in
KSZ9896C as "Module 5: Certain PHY registers must be written as pairs
instead of singly" the explanation below is likewise taken from this
commit.
The commit provided code
to apply "Module 6: Certain PHY registers must be written as pairs instead
of singly" errata for KSZ9477 as this chip for certain PHY registers
(0xN120 to 0xN13F, N=1,2,3,4,5) must be accessed as 32 bit words instead
of 16 or 8 bit access.
Otherwise, adjacent registers (no matter if reserved or not) are
overwritten with 0x0.
Without this patch some registers (e.g. 0x113c or 0x1134) required for 32
bit access are out of valid regmap ranges.
As a result, following error is observed and KSZ9896 is not properly
configured:
ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO
ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO
ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO
ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0
The solution is to modify regmap_reg_range to allow accesses with 4 bytes
boundaries.
Fixes: 5c844d57aa78 ("net: dsa: microchip: fix writes to phy registers >= 0x10")
Signed-off-by: Jesse Van Gavere <jesse.vangavere@scioteq.com>
Link: https://patch.msgid.link/20241211092932.26881-1-jesse.vangavere@scioteq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MPIC.PIS must be set per phy interface type.
MPIC.LSC must be set per speed.
Do that strictly per datasheet, instead of hardcoding MPIC.PIS to GMII.
Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20241211053012.368914-1-nikita.yoush@cogentembedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.
==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
<TASK>
dump_stack_lvl+0xfd/0x150
print_report+0x131/0x780
kasan_report+0x177/0x1c0
btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 82:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
__kasan_slab_alloc+0x4e/0x60
kmem_cache_alloc+0x19f/0x360
skb_clone+0x132/0xf70
btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
btusb_rx_work+0x9e/0xe0 [btusb]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
Freed by task 1733:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
kasan_save_free_info+0x28/0xb0
____kasan_slab_free+0xfd/0x170
kmem_cache_free+0x183/0x3f0
hci_devcd_rx+0x91a/0x2060 [bluetooth]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
The buggy address belongs to the object at ffff888033cfab40
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
freed 232-byte region [ffff888033cfab40, ffff888033cfac28)
The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds.
Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The arguments for __dma_buf_debugfs_list_del do not match for both the
CONFIG_DEBUG_FS case and the !CONFIG_DEBUG_FS case. The !CONFIG_DEBUG_FS
case should take a struct dma_buf *, but it's currently struct file *.
This can lead to the build error:
error: passing argument 1 of ‘__dma_buf_debugfs_list_del’ from
incompatible pointer type [-Werror=incompatible-pointer-types]
dma-buf.c:63:53: note: expected ‘struct file *’ but argument is of
type ‘struct dma_buf *’
63 | static void __dma_buf_debugfs_list_del(struct file *file)
Fixes: bfc7bc539392 ("dma-buf: Do not build debugfs related code when !CONFIG_DEBUG_FS")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241117170326.1971113-1-tjmercier@google.com
|
