summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-04-25Merge branches 'clk-of', 'clk-samsung', 'clk-rockchip' and 'clk-qcom' into ↵Stephen Boyd
clk-next * clk-of: clk: add missing of_node_put() in "assigned-clocks" property parsing * clk-samsung: clk: samsung: exynos850: Make PMU_ALIVE_PCLK critical clk: samsung: Convert to platform remove callback returning void clk: samsung: exynos5433: Extract PM support to common ARM64 layer clk: samsung: Extract parent clock enabling to common function clk: samsung: Extract clocks registration to common function clk: samsung: exynos850: Add AUD and HSI main gate clocks clk: samsung: exynos850: Implement CMU_G3D domain clk: samsung: clk-pll: Implement pll0818x PLL type clk: samsung: Set dev in samsung_clk_init() clk: samsung: Don't pass reg_base to samsung_clk_register_pll() clk: samsung: Remove np argument from samsung_clk_init() dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D * clk-rockchip: clk: rockchip: rk3588: make gate linked clocks critical clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent * clk-qcom: (57 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: qcom: Add Global Clock Controller driver for IPQ9574 dt-bindings: clock: Add ipq9574 clock and reset definitions clk: qcom: gpucc-sm6375: Configure CX_GDSC disable wait value clk: qcom: gcc-sm6115: Mark RCGs shared where applicable clk: qcom: dispcc-qcm2290: Add MDSS_CORE reset dt-bindings: clock: dispcc-qcm2290: Add MDSS_CORE reset clk: qcom: apss-ipq-pll: add support for IPQ5332 dt-bindings: clock: qcom,a53pll: add IPQ5332 compatible clk: qcom: apss-ipq-pll: refactor the driver to accommodate different PLL types dt-bindings: mailbox: qcom,apcs-kpss-global: fix SDX55 'if' match dt-bindings: mailbox: qcom,apcs-kpss-global: correct SDX55 clocks ...
2023-04-25Merge branches 'clk-starfive', 'clk-fractional' and 'clk-devmof' into clk-nextStephen Boyd
- Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() * clk-starfive: clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: starfive: Avoid casting iomem pointers MAINTAINERS: generalise StarFive clk/reset entries reset: starfive: Add StarFive JH7110 reset driver clk: starfive: Add StarFive JH7110 always-on clock driver clk: starfive: Add StarFive JH7110 system clock driver reset: starfive: jh71x0: Use 32bit I/O on 32bit registers reset: starfive: Rename "jh7100" to "jh71x0" for the common code reset: starfive: Extract the common JH71X0 reset code reset: starfive: Factor out common JH71X0 reset code reset: Create subdirectory for StarFive drivers reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE clk: starfive: Rename "jh7100" to "jh71x0" for the common code clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h clk: starfive: Factor out common JH7100 and JH7110 code clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator dt-bindings: clock: Add StarFive JH7110 system clock and reset generator * clk-fractional: clk: Remove mmask and nmask fields in struct clk_fractional_divider clk: rockchip: Remove values for mmask and nmask in struct clk_fractional_divider clk: imx: Remove values for mmask and nmask in struct clk_fractional_divider clk: Compute masks for fractional_divider clk when needed. * clk-devmof: clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` clk: hsdk-pll: Use managed `of_clk_add_hw_provider()` clk: cdce706: Use managed `of_clk_add_hw_provider()` clk: axs10x: Use managed `of_clk_add_hw_provider()` clk: axm5516: Use managed `of_clk_add_hw_provider()` clk: axi-clkgen: Use managed `of_clk_add_hw_provider()`
2023-04-25Merge branches 'clk-xilinx', 'clk-broadcom' and 'clk-platform' into clk-nextStephen Boyd
- BCM63268 timer clock and reset controller - Convert platform clk drivers to remove_new * clk-xilinx: clocking-wizard: Support higher frequency accuracy clk: zynqmp: pll: Remove the limit * clk-broadcom: clk: bcm: Add BCM63268 timer clock and reset driver dt-bindings: clock: Add BCM63268 timer binding dt-bindings: reset: add BCM63268 timer reset definitions dt-bindings: clk: add BCM63268 timer clock definitions * clk-platform: (25 commits) clk: xilinx: Convert to platform remove callback returning void clk: x86: Convert to platform remove callback returning void clk: uniphier: Convert to platform remove callback returning void clk: ti: Convert to platform remove callback returning void clk: tegra: Convert to platform remove callback returning void clk: stm32: Convert to platform remove callback returning void clk: mvebu: Convert to platform remove callback returning void clk: mmp: Convert to platform remove callback returning void clk: keystone: Convert to platform remove callback returning void clk: hisilicon: Convert to platform remove callback returning void clk: stm32mp1: Convert to platform remove callback returning void clk: scpi: Convert to platform remove callback returning void clk: s2mps11: Convert to platform remove callback returning void clk: pwm: Convert to platform remove callback returning void clk: palmas: Convert to platform remove callback returning void clk: hsdk-pll: Convert to platform remove callback returning void clk: fixed-rate: Convert to platform remove callback returning void clk: fixed-mmio: Convert to platform remove callback returning void clk: fixed-factor: Convert to platform remove callback returning void clk: axm5516: Convert to platform remove callback returning void ...
2023-04-25Merge branches 'clk-mediatek', 'clk-sunplus', 'clk-loongson' and ↵Stephen Boyd
'clk-socfpga' into clk-next - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Reimplement Loongson-1 clk driver with DT support - Clk driver support for Loongson-2 SoCs - Migrate socfpga clk driver to of_clk_add_hw_provider() * clk-mediatek: (84 commits) clk: mediatek: fhctl: Mark local variables static clk: mediatek: Use right match table, include mod_devicetable clk: mediatek: Add MT8188 adsp clock support clk: mediatek: Add MT8188 imp i2c wrapper clock support clk: mediatek: Add MT8188 wpesys clock support clk: mediatek: Add MT8188 vppsys1 clock support clk: mediatek: Add MT8188 vppsys0 clock support clk: mediatek: Add MT8188 vencsys clock support clk: mediatek: Add MT8188 vdosys1 clock support clk: mediatek: Add MT8188 vdosys0 clock support clk: mediatek: Add MT8188 vdecsys clock support clk: mediatek: Add MT8188 mfgcfg clock support clk: mediatek: Add MT8188 ipesys clock support clk: mediatek: Add MT8188 imgsys clock support clk: mediatek: Add MT8188 ccusys clock support clk: mediatek: Add MT8188 camsys clock support clk: mediatek: Add MT8188 infrastructure clock support clk: mediatek: Add MT8188 peripheral clock support clk: mediatek: Add MT8188 topckgen clock support clk: mediatek: Add MT8188 apmixedsys clock support ... * clk-sunplus: clk: Add Sunplus SP7021 clock driver * clk-loongson: clk: clk-loongson2: add clock controller driver support dt-bindings: clock: add loongson-2 boot clock index MAINTAINERS: remove obsolete file entry in MIPS/LOONGSON1 ARCHITECTURE MIPS: loongson32: Update the clock initialization clk: loongson1: Re-implement the clock driver clk: loongson1: Remove the outdated driver dt-bindings: clock: Add Loongson-1 clock * clk-socfpga: clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling
2023-04-25Merge branches 'clk-cleanup', 'clk-aspeed', 'clk-dt', 'clk-renesas' and ↵Stephen Boyd
'clk-skyworks' into clk-next - Support for i3c clks on Aspeed ast2600 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators * clk-cleanup: clk: microchip: fix potential UAF in auxdev release callback clk: sifive: make SiFive clk drivers depend on ARCH_ symbols clk: stm32h7: Remove an unused field in struct stm32_fractional_divider clk: tegra20: fix gcc-7 constant overflow warning clock: milbeaut: use devm_platform_get_and_ioremap_resource() clk: Print an info line before disabling unused clocks clk: ti: Use of_address_to_resource() clk: remove unnecessary (void*) conversions clk: at91: clk-sam9x60-pll: fix return value check clk: visconti: remove unused visconti_pll_provider::regmap * clk-aspeed: dt-bindings: clock: ast2600: Expand comment on reset definitions clk: ast2600: Add comment about combined clock + reset handling dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions clk: ast2600: Add full configs for I3C clocks dt-bindings: clock: ast2600: Add top-level I3C clock clk: ast2600: allow empty entries in aspeed_g6_gates * clk-dt: clk: mediatek: clk-pllfh: fix missing of_node_put() in fhctl_parse_dt() clk: Use of_property_present() for testing DT property presence * clk-renesas: clk: renesas: r8a77980: Add I2C5 clock clk: rs9: Add support for 9FGV0441 clk: rs9: Support device specific dif bit calculation dt-bindings: clk: rs9: Add 9FGV0441 clk: rs9: Check for vendor/device ID clk: renesas: Convert to platform remove callback returning void clk: renesas: r9a06g032: Improve clock tables clk: renesas: r9a06g032: Document structs clk: renesas: r9a06g032: Drop unused fields clk: renesas: r9a06g032: Improve readability clk: renesas: r8a77980: Add Z2 clock clk: renesas: r8a77970: Add Z2 clock clk: renesas: r8a77995: Fix VIN parent clock clk: renesas: r8a77980: Add VIN clocks clk: renesas: r8a779g0: Add VIN clocks clk: renesas: r8a779g0: Add ISPCS clocks clk: renesas: r8a779g0: Add CSI-2 clocks clk: renesas: r8a779g0: Add thermal clock clk: renesas: r8a779g0: Add Audio clocks clk: renesas: cpg-mssr: Update MSSR register range for R-Car V4H * clk-skyworks: clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators dt-bindings: clk: si521xx: Add Skyworks Si521xx I2C PCIe clock generators
2023-04-25Merge tag 'irq-core-2023-04-24' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt updates from Thomas Gleixner: "Core: - Add tracepoints for tasklet callbacks which makes it possible to analyze individual tasklet functions instead of guess working from the overall duration of tasklet processing - Ensure that secondary interrupt threads have their affinity adjusted correctly Drivers: - A large rework of the RISC-V IPI management to prepare for a new RISC-V interrupt architecture - Small fixes and enhancements all over the place - Removal of support for various obsolete hardware platforms and the related code" * tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) irqchip/st: Remove stih415/stih416 and stid127 platforms support irqchip/gic-v3: Add Rockchip 3588001 erratum workaround genirq: Update affinity of secondary threads softirq: Add trace points for tasklet entry/exit irqchip/loongson-pch-pic: Fix pch_pic_acpi_init calling irqchip/loongson-pch-pic: Fix registration of syscore_ops irqchip/loongson-eiointc: Fix registration of syscore_ops irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent irqchip/loongson-eiointc: Fix returned value on parsing MADT irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers RISC-V: Use IPIs for remote icache flush when possible RISC-V: Use IPIs for remote TLB flush when possible RISC-V: Allow marking IPIs as suitable for remote FENCEs RISC-V: Treat IPIs as normal Linux IRQs irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode RISC-V: Clear SIP bit only when using SBI IPI operations irqchip/irq-sifive-plic: Add syscore callbacks for hibernation irqchip: Use of_property_read_bool() for boolean properties irqchip/bcm-6345-l1: Request memory region irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4 ...
2023-04-25Merge tag 'x86_sev_for_v6.4_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV updates from Borislav Petkov: - Add the necessary glue so that the kernel can run as a confidential SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the address space in two parts: encrypted and unencrypted. The use case being running unmodified guests on the Hyper-V confidential computing hypervisor - Double-buffer messages between the guest and the hardware PSP device so that no partial buffers are copied back'n'forth and thus potential message integrity and leak attacks are possible - Name the return value the sev-guest driver returns when the hw PSP device hasn't been called, explicitly - Cleanups * tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyperv: Change vTOM handling to use standard coco mechanisms init: Call mem_encrypt_init() after Hyper-V hypercall init is done x86/mm: Handle decryption/re-encryption of bss_decrypted consistently Drivers: hv: Explicitly request decrypted in vmap_pfn() calls x86/hyperv: Reorder code to facilitate future work x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM x86/sev: Change snp_guest_issue_request()'s fw_err argument virt/coco/sev-guest: Double-buffer messages crypto: ccp: Get rid of __sev_platform_init_locked()'s local function pointer crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL
2023-04-25Merge tag 'edac_updates_for_v6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - skx_edac: Fix overflow when decoding 32G DIMM ranks - i10nm_edac: Add Sierra Forest support - amd64_edac: Split driver code between legacy and SMCA systems. The final goal is adding support for more hw, like GPUs - The usual minor cleanups and fixes * tag 'edac_updates_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (25 commits) EDAC/i10nm: Add Intel Sierra Forest server support EDAC/amd64: Fix indentation in umc_determine_edac_cap() EDAC/altera: Remove MODULE_LICENSE in non-module EDAC: Sanitize MODULE_AUTHOR strings EDAC/amd81[13]1: Remove trailing newline from MODULE_AUTHOR EDAC/amd64: Add get_err_info() to pvt->ops EDAC/amd64: Split dump_misc_regs() into dct/umc functions EDAC/amd64: Split init_csrows() into dct/umc functions EDAC/amd64: Split determine_edac_cap() into dct/umc functions EDAC/amd64: Rename f17h_determine_edac_ctl_cap() EDAC/amd64: Split setup_mci_misc_attrs() into dct/umc functions EDAC/amd64: Split ecc_enabled() into dct/umc functions EDAC/amd64: Split read_mc_regs() into dct/umc functions EDAC/amd64: Split determine_memory_type() into dct/umc functions EDAC/amd64: Split read_base_mask() into dct/umc functions EDAC/amd64: Split prep_chip_selects() into dct/umc functions EDAC/amd64: Rework hw_info_{get,put} EDAC/amd64: Merge struct amd64_family_type into struct amd64_pvt EDAC/amd64: Do not discover ECC symbol size for Family 17h and later EDAC/amd64: Drop dbam_to_cs() for Family 17h and later ...
2023-04-25Merge tag 'm68k-for-v6.4-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - defconfig updates - miscellaneous fixes and improvements * tag 'm68k-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: kexec: Include <linux/reboot.h> m68k: defconfig: Update defconfigs for v6.3-rc1 m68k: Remove obsolete config NO_KERNEL_MSG nubus: Drop noop match function
2023-04-25spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPSDhruva Gole
Using this macro makes the code more readable. It also inits the members of dev_pm_ops in the following manner without us explicitly needing to: .suspend = bcm63xx_spi_suspend, \ .resume = bcm63xx_spi_resume, \ .freeze = bcm63xx_spi_suspend, \ .thaw = bcm63xx_spi_resume, \ .poweroff = bcm63xx_spi_suspend, \ .restore = bcm63xx_spi_resume Signed-off-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230424102546.1604484-1-d-gole@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-25block/drivers: remove dead clear of random flagChaitanya Kulkarni
QUEUE_FLAG_ADD_RANDOM is not set before we clear it for "null_blk", "brd", "nbd", "zram", and "bcache" since by default we don't set "QUEUE_FLAG_ADD_RANDOM" to MQ ops. Remove dead clear of QUEUE_FLAG_ADD_RANDOM in above listed drivers. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> #zram Link: https://lore.kernel.org/r/20230424234628.45544-2-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-25xen/blkback: move blkif_get_x86_*_req() into blkback.cJuergen Gross
There is no need to have the functions blkif_get_x86_32_req() and blkif_get_x86_64_req() in a header file, as they are used in one place only. So move them into the using source file and drop the inline qualifier. While at it fix some style issues, and simplify the code by variable reusing and using min() instead of open coding it. Instead of using barrier() use READ_ONCE() for avoiding multiple reads of nr_segments. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-04-25xen/blkback: simplify free_persistent_gnts() interfaceJuergen Gross
The interface of free_persistent_gnts() can be simplified, as there is only a single caller of free_persistent_gnts() and the 2nd and 3rd parameters are easily obtainable via the ring pointer, which is passed as the first parameter anyway. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-04-25xen/blkback: remove stale prototypeJuergen Gross
There is no function xen_blkif_purge_persistent(), so remove its prototype from common.h. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-04-25xen/blkback: fix white space code style issuesJuergen Gross
Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-04-25HID: amd_sfh: Fix max supported HID devicesBasavaraj Natikar
commit 4bd763568dbd ("HID: amd_sfh: Support for additional light sensor") adds additional sensor devices, but forgets to add the number of HID devices to match. Thus, the number of HID devices does not match the actual number of sensors. In order to prevent corruption and system hangs when more than the allowed number of HID devices are accessed, the number of HID devices is increased accordingly. Fixes: 4bd763568dbd ("HID: amd_sfh: Support for additional light sensor") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217354 Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Link: https://lore.kernel.org/r/20230424160406.2579888-1-Basavaraj.Natikar@amd.com Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-04-25net: phy: marvell-88x2222: remove unnecessary (void*) conversionswuych
Pointer variables of void * type do not require type cast. Signed-off-by: wuych <yunchuan@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-25net: amd: Fix link leak when verifying config failedGencen Gan
After failing to verify configuration, it returns directly without releasing link, which may cause memory leak. Paolo Abeni thinks that the whole code of this driver is quite "suboptimal" and looks unmainatained since at least ~15y, so he suggests that we could simply remove the whole driver, please take it into consideration. Simon Horman suggests that the fix label should be set to "Linux-2.6.12-rc2" considering that the problem has existed since the driver was introduced and the commit above doesn't seem to exist in net/net-next. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Gan Gecen <gangecen@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-25media: ov5670: Fix probe on ACPISakari Ailus
devm_clk_get() will return either an error or NULL, which the driver handles, continuing to use the clock of reading the value of the clock-frequency property. However, the value of ov5670->xvclk is left as-is and the other clock framework functions aren't capable of handling error values. Use devm_clk_get_optional() to obtain NULL instead of -ENOENT. Fixes: 8004c91e2095 ("media: i2c: ov5670: Use common clock framework") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-24scsi: qedi: Fix use after free bug in qedi_remove()Zheng Wang
In qedi_probe() we call __qedi_probe() which initializes &qedi->recovery_work with qedi_recovery_handler() and &qedi->board_disable_work with qedi_board_disable_work(). When qedi_schedule_recovery_handler() is called, schedule_delayed_work() will finally start the work. In qedi_remove(), which is called to remove the driver, the following sequence may be observed: Fix this by finishing the work before cleanup in qedi_remove(). CPU0 CPU1 |qedi_recovery_handler qedi_remove | __qedi_remove | iscsi_host_free | scsi_host_put | //free shost | |iscsi_host_for_each_session |//use qedi->shost Cancel recovery_work and board_disable_work in __qedi_remove(). Fixes: 4b1068f5d74b ("scsi: qedi: Add MFW error recovery process") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Link: https://lore.kernel.org/r/20230413033422.28003-1-zyytlz.wz@163.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-24scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issueAlice Chao
When ufshcd_err_handler() is executed, CQ event interrupt can enter waiting for the same lock. This can happen in ufshcd_handle_mcq_cq_events() and also in ufs_mtk_mcq_intr(). The following warning message will be generated when &hwq->cq_lock is used in IRQ context with IRQ enabled. Use ufshcd_mcq_poll_cqe_lock() with spin_lock_irqsave instead of spin_lock to resolve the deadlock issue. [name:lockdep&]WARNING: inconsistent lock state [name:lockdep&]-------------------------------- [name:lockdep&]inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [name:lockdep&]kworker/u16:4/260 [HC0[0]:SC0[0]:HE1:SE1] takes: ffffff8028444600 (&hwq->cq_lock){?.-.}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x30/0xe0 [name:lockdep&]{IN-HARDIRQ-W} state was registered at: lock_acquire+0x17c/0x33c _raw_spin_lock+0x5c/0x7c ufshcd_mcq_poll_cqe_lock+0x30/0xe0 ufs_mtk_mcq_intr+0x60/0x1bc [ufs_mediatek_mod] __handle_irq_event_percpu+0x140/0x3ec handle_irq_event+0x50/0xd8 handle_fasteoi_irq+0x148/0x2b0 generic_handle_domain_irq+0x4c/0x6c gic_handle_irq+0x58/0x134 call_on_irq_stack+0x40/0x74 do_interrupt_handler+0x84/0xe4 el1_interrupt+0x3c/0x78 <snip> Possible unsafe locking scenario: CPU0 ---- lock(&hwq->cq_lock); <Interrupt> lock(&hwq->cq_lock); *** DEADLOCK *** 2 locks held by kworker/u16:4/260: [name:lockdep&] stack backtrace: CPU: 7 PID: 260 Comm: kworker/u16:4 Tainted: G S W OE 6.1.17-mainline-android14-2-g277223301adb #1 Workqueue: ufs_eh_wq_0 ufshcd_err_handler Call trace: dump_backtrace+0x10c/0x160 show_stack+0x20/0x30 dump_stack_lvl+0x98/0xd8 dump_stack+0x20/0x60 print_usage_bug+0x584/0x76c mark_lock_irq+0x488/0x510 mark_lock+0x1ec/0x25c __lock_acquire+0x4d8/0xffc lock_acquire+0x17c/0x33c _raw_spin_lock+0x5c/0x7c ufshcd_mcq_poll_cqe_lock+0x30/0xe0 ufshcd_poll+0x68/0x1b0 ufshcd_transfer_req_compl+0x9c/0xc8 ufshcd_err_handler+0x3bc/0xea0 process_one_work+0x2f4/0x7e8 worker_thread+0x234/0x450 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Fixes: ed975065c31c ("scsi: ufs: core: mcq: Add completion support in poll") Reviewed-by: Can Guo <quic_cang@quicinc.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Alice Chao <alice.chao@mediatek.com> Link: https://lore.kernel.org/r/20230424080400.8955-1-alice.chao@mediatek.com Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-24scsi: ipr: Remove several unused variablesTom Rix
gcc with W=1 reports drivers/scsi/ipr.c: In function ‘ipr_init_res_entry’: drivers/scsi/ipr.c:1104:22: error: variable ‘proto’ set but not used [-Werror=unused-but-set-variable] 1104 | unsigned int proto; | ^~~~~ drivers/scsi/ipr.c: In function ‘ipr_update_res_entry’: drivers/scsi/ipr.c:1261:22: error: variable ‘proto’ set but not used [-Werror=unused-but-set-variable] 1261 | unsigned int proto; | ^~~~~ drivers/scsi/ipr.c: In function ‘ipr_change_queue_depth’: drivers/scsi/ipr.c:4417:36: error: variable ‘res’ set but not used [-Werror=unused-but-set-variable] 4417 | struct ipr_resource_entry *res; | ^~~ These variables are not used, so remove them. The lock around res is not needed so remove that. This makes ioa_cfg and lock_flags unneeded so remove them as well. Fixes: 65a15d6560df ("scsi: ipr: Remove SATA support") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230420125035.3888188-1-trix@redhat.com Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-24scsi: pm80xx: Log device registrationAkshat Jain
Log combination of phy_id and device_id in device registration response. Signed-off-by: Akshat Jain <akshatzen@google.com> Signed-off-by: Pranav Prasad <pranavpp@google.com> Link: https://lore.kernel.org/r/20230411230650.1760757-1-pranavpp@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-24net: phy: marvell: Fix inconsistent indenting in led_blink_setChristian Marangi
Fix inconsistent indeinting in m88e1318_led_blink_set reported by kernel test robot, probably done by the presence of an if condition dropped in later revision of the same code. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304240007.0VEX8QYG-lkp@intel.com/ Fixes: ea9e86485dec ("net: phy: marvell: Implement led_blink_set()") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230423172800.3470-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24lan966x: Don't use xdp_frame when action is XDP_TXHoratiu Vultur
When the action of an xdp program was XDP_TX, lan966x was creating a xdp_frame and use this one to send the frame back. But it is also possible to send back the frame without needing a xdp_frame, because it is possible to send it back using the page. And then once the frame is transmitted is possible to use directly page_pool_recycle_direct as lan966x is using page pools. This would save some CPU usage on this path, which results in higher number of transmitted frames. Bellow are the statistics: Frame size: Improvement: 64 ~8% 256 ~11% 512 ~8% 1000 ~0% 1500 ~0% Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230422142344.3630602-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Add XDP socket zero-copy TX supportGerhard Engleder
Send and complete XSK pool frames within TX NAPI context. NAPI context is triggered by ndo_xsk_wakeup. Test results with A53 1.2GHz: xdpsock txonly copy mode, 64 byte frames: pps pkts 1.00 tx 284,409 11,398,144 Two CPUs with 100% and 10% utilization. xdpsock txonly zero-copy mode, 64 byte frames: pps pkts 1.00 tx 511,929 5,890,368 Two CPUs with 100% and 1% utilization. xdpsock l2fwd copy mode, 64 byte frames: pps pkts 1.00 rx 248,985 7,315,885 tx 248,921 7,315,885 Two CPUs with 100% and 10% utilization. xdpsock l2fwd zero-copy mode, 64 byte frames: pps pkts 1.00 rx 254,735 3,039,456 tx 254,735 3,039,456 Two CPUs with 100% and 4% utilization. Packet rate increases and CPU utilization is reduced in both cases. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Add XDP socket zero-copy RX supportGerhard Engleder
Add support for XSK zero-copy to RX path. The setup of the XSK pool can be done at runtime. If the netdev is running, then the queue must be disabled and enabled during reconfiguration. This can be done easily with functions introduced in previous commits. A more important property is that, if the netdev is running, then the setup of the XSK pool shall not stop the netdev in case of errors. A broken netdev after a failed XSK pool setup is bad behavior. Therefore, the allocation and setup of resources during XSK pool setup is done only before any queue is disabled. Additionally, freeing and later allocation of resources is eliminated in some cases. Page pool entries are kept for later use. Two memory models are registered in parallel. As a result, the XSK pool setup cannot fail during queue reconfiguration. In contrast to other drivers, XSK pool setup and XDP BPF program setup are separate actions. XSK pool setup can be done without any XDP BPF program. The XDP BPF program can be added, removed or changed without any reconfiguration of the XSK pool. Test results with A53 1.2GHz: xdpsock rxdrop copy mode, 64 byte frames: pps pkts 1.00 rx 856,054 10,625,775 Two CPUs with both 100% utilization. xdpsock rxdrop zero-copy mode, 64 byte frames: pps pkts 1.00 rx 889,388 4,615,284 Two CPUs with 100% and 20% utilization. Packet rate increases and CPU utilization is reduced. 100% CPU load seems to the base load. This load is consumed by ksoftirqd just for dropping the generated packets without xdpsock running. Using batch API reduced CPU utilization slightly, but measurements are not stable enough to provide meaningful numbers. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Move skb receive action to separate functionGerhard Engleder
The function tsnep_rx_poll() is already pretty long and the skb receive action can be reused for XSK zero-copy support. Move page based skb receive to separate function. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Add functions for queue enable/disableGerhard Engleder
Move queue enable and disable code to separate functions. This way the activation and deactivation of the queues are defined actions, which can be used in future execution paths. This functions will be used for the queue reconfiguration at runtime, which is necessary for XSK zero-copy support. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Rework TX/RX queue initializationGerhard Engleder
Make initialization of TX and RX queues less dynamic by moving some initialization from netdev open/close to device probing. Additionally, move some initialization code to separate functions to enable future use in other execution paths. This is done as preparation for queue reconfigure at runtime, which is necessary for XSK zero-copy support. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Replace modulo operation with maskGerhard Engleder
TX/RX ring size is static and power of 2 to enable compiler to optimize modulo operation to mask operation. Make this optimization already in the code and don't rely on the compiler. CPU utilisation during high packet rate has not changed. So no performance improvement has been measured. But it is best practice to prevent modulo operations. Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: phy: dp83867: Add led_brightness_set supportAlexander Stein
Up to 4 LEDs can be attached to the PHY, add support for setting brightness manually. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230424134625.303957-1-alexander.stein@ew.tq-group.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: phy: Fix reading LED reg propertyAlexander Stein
'reg' is always encoded in 32 bits, thus it has to be read using the function with the corresponding bit width. Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230424141648.317944-1-alexander.stein@ew.tq-group.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24drivers: nfc: nfcsim: remove return value check of `dev_dir`Jianuo Kuang
Smatch complains that: nfcsim_debugfs_init_dev() warn: 'dev_dir' is an error pointer or valid According to the documentation of the debugfs_create_dir() function, there is no need to check the return value of this function. Just delete the dead code. Signed-off-by: Jianuo Kuang <u202110722@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230424024140.34607-1-u202110722@hust.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: phy: dp83867: Remove unnecessary (void*) conversionswuych
Pointer variables of void * type do not require type cast. Signed-off-by: wuych <yunchuan@nfschina.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230424101550.664319-1-yunchuan@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: mana: Check if netdev/napi_alloc_frag returns single pageHaiyang Zhang
netdev/napi_alloc_frag() may fall back to single page which is smaller than the requested size. Add error checking to avoid memory overwritten. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: mana: Rename mana_refill_rxoob and remove some empty linesHaiyang Zhang
Rename mana_refill_rxoob for naming consistency. And remove some empty lines between function call and error checking. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: veth: add page_pool statsLorenzo Bianconi
Introduce page_pool stats support to report info about local page_pool through ethtool Tested-by: Maryam Tahhan <mtahhan@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: veth: add page_pool for page recyclingLorenzo Bianconi
Introduce page_pool support in veth driver in order to recycle pages in veth_convert_skb_to_xdp_buff routine and avoid reallocating the skb through the page allocator. The patch has been tested sending tcp traffic to a veth pair where the remote peer is running a simple xdp program just returning xdp_pass: veth upstream codebase: MTU 1500B: ~ 8Gbps MTU 8000B: ~ 13.9Gbps veth upstream codebase + pp support: MTU 1500B: ~ 9.2Gbps MTU 8000B: ~ 16.2Gbps Tested-by: Maryam Tahhan <mtahhan@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24Merge tag 'v6.4/kernel.user_worker' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull user work thread updates from Christian Brauner: "This contains the work generalizing the ability to create a kernel worker from a userspace process. Such user workers will run with the same credentials as the userspace process they were created from providing stronger security and accounting guarantees than the traditional override_creds() approach ever could've hoped for. The original work was heavily based and optimzed for the needs of io_uring which was the first user. However, as it quickly turned out the ability to create user workers inherting properties from a userspace process is generally useful. The vhost subsystem currently creates workers using the kthread api. The consequences of using the kthread api are that RLIMITs don't work correctly as they are inherited from khtreadd. This leads to bugs where more workers are created than would be allowed by the RLIMITs of the userspace process in lieu of which workers are created. Problems like this disappear with user workers created from the userspace processes for which they perform the work. In addition, providing this api allows vhost to remove additional complexity. For example, cgroup and mm sharing will just work out of the box with user workers based on the relevant userspace process instead of manually ensuring the correct cgroup and mm contexts are used. So the vhost subsystem should simply be made to use the same mechanism as io_uring. To this end the original mechanism used for create_io_thread() is generalized into user workers: - Introduce PF_USER_WORKER as a generic indicator that a given task is a user worker, i.e., a kernel task that was created from a userspace process. Now a PF_IO_WORKER thread is just a specialized version of PF_USER_WORKER. So io_uring io workers raise both flags. - Make copy_process() available to core kernel code - Extend struct kernel_clone_args with the following bitfields allowing to indicate to copy_process(): - to create a user worker (raise PF_USER_WORKER) - to not inherit any files from the userspace process - to ignore signals After all generic changes are in place the vhost subsystem implements a new dedicated vhost api based on user workers. Finally, vhost is switched to rely on the new api moving it off of kthreads. Thanks to Mike for sticking it out and making it through this rather arduous journey" * tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: vhost: use vhost_tasks for worker threads vhost: move worker thread fields to new struct vhost_task: Allow vhost layer to use copy_process fork: allow kernel code to call copy_process fork: Add kernel_clone_args flag to ignore signals fork: add kernel_clone_args flag to not dup/clone files fork/vm: Move common PF_IO_WORKER behavior to new flag kernel: Make io_thread and kthread bit fields kthread: Pass in the thread's name during creation kernel: Allow a kernel thread's name to be set in copy_process csky: Remove kernel_thread declaration
2023-04-24Merge tag 'docs-6.4' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "Commit volume in documentation is relatively low this time, but there is still a fair amount going on, including: - Reorganize the architecture-specific documentation under Documentation/arch This makes the structure match the source directory and helps to clean up the mess that is the top-level Documentation directory a bit. This work creates the new directory and moves x86 and most of the less-active architectures there. The current plan is to move the rest of the architectures in 6.5, with the patches going through the appropriate subsystem trees. - Some more Spanish translations and maintenance of the Italian translation - A new "Kernel contribution maturity model" document from Ted - A new tutorial on quickly building a trimmed kernel from Thorsten Plus the usual set of updates and fixes" * tag 'docs-6.4' of git://git.lwn.net/linux: (47 commits) media: Adjust column width for pdfdocs media: Fix building pdfdocs docs: clk: add documentation to log which clocks have been disabled docs: trace: Fix typo in ftrace.rst Documentation/process: always CC responsible lists docs: kmemleak: adjust to config renaming ELF: document some de-facto PT_* ABI quirks Documentation: arm: remove stih415/stih416 related entries docs: turn off "smart quotes" in the HTML build Documentation: firmware: Clarify firmware path usage docs/mm: Physical Memory: Fix grammar Documentation: Add document for false sharing dma-api-howto: typo fix docs: move m68k architecture documentation under Documentation/arch/ docs: move parisc documentation under Documentation/arch/ docs: move ia64 architecture docs under Documentation/arch/ docs: Move arc architecture docs under Documentation/arch/ docs: move nios2 documentation under Documentation/arch/ docs: move openrisc documentation under Documentation/arch/ docs: move superh documentation under Documentation/arch/ ...
2023-04-24Merge tag 'rcu.6.4.april5.2023.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux Pull RCU updates from Joel Fernandes: - Updates and additions to MAINTAINERS files, with Boqun being added to the RCU entry and Zqiang being added as an RCU reviewer. I have also transitioned from reviewer to maintainer; however, Paul will be taking over sending RCU pull-requests for the next merge window. - Resolution of hotplug warning in nohz code, achieved by fixing cpu_is_hotpluggable() through interaction with the nohz subsystem. Tick dependency modifications by Zqiang, focusing on fixing usage of the TICK_DEP_BIT_RCU_EXP bitmask. - Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n kernels, fixed by Zqiang. - Improvements to rcu-tasks stall reporting by Neeraj. - Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for increased robustness, affecting several components like mac802154, drbd, vmw_vmci, tracing, and more. A report by Eric Dumazet showed that the API could be unknowingly used in an atomic context, so we'd rather make sure they know what they're asking for by being explicit: https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/ - Documentation updates, including corrections to spelling, clarifications in comments, and improvements to the srcu_size_state comments. - Better srcu_struct cache locality for readers, by adjusting the size of srcu_struct in support of SRCU usage by Christoph Hellwig. - Teach lockdep to detect deadlocks between srcu_read_lock() vs synchronize_srcu() contributed by Boqun. Previously lockdep could not detect such deadlocks, now it can. - Integration of rcutorture and rcu-related tools, targeted for v6.4 from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis module parameter, and more - Miscellaneous changes, various code cleanups and comment improvements * tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits) checkpatch: Error out if deprecated RCU API used mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep() rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep() ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep() net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep() net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep() lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep() tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep() misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep() drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep() rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan() rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early rcu: Remove never-set needwake assignment from rcu_report_qs_rdp() rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race rcu/trace: use strscpy() to instead of strncpy() tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem ...
2023-04-24Merge tag 'tpmdd-v6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: - The .machine keyring, used for Machine Owner Keys (MOK), acquired the ability to store only CA enforced keys, and put rest to the .platform keyring, thus separating the code signing keys from the keys that are used to sign certificates. This essentially unlocks the use of the .machine keyring as a trust anchor for IMA. It is an opt-in feature, meaning that the additional contraints won't brick anyone who does not care about them. - Enable interrupt based transactions with discrete TPM chips (tpm_tis). There was code for this existing but it never really worked so I consider this a new feature rather than a bug fix. Before the driver just fell back to the polling mode. Link: https://lore.kernel.org/linux-integrity/a93b6222-edda-d43c-f010-a59701f2aeef@gmx.de/ Link: https://lore.kernel.org/linux-integrity/20230302164652.83571-1-eric.snowberg@oracle.com/ * tag 'tpmdd-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (29 commits) tpm: Add !tpm_amd_is_rng_defective() to the hwrng_unregister() call site tpm_tis: fix stall after iowrite*()s tpm/tpm_tis_synquacer: Convert to platform remove callback returning void tpm/tpm_tis: Convert to platform remove callback returning void tpm/tpm_ftpm_tee: Convert to platform remove callback returning void tpm: tpm_tis_spi: Mark ACPI and OF related data as maybe unused tpm: st33zp24: Mark ACPI and OF related data as maybe unused tpm, tpm_tis: Enable interrupt test tpm, tpm_tis: startup chip before testing for interrupts tpm, tpm_tis: Claim locality when interrupts are reenabled on resume tpm, tpm_tis: Claim locality in interrupt handler tpm, tpm_tis: Request threaded interrupt handler tpm, tpm: Implement usage counter for locality tpm, tpm_tis: do not check for the active locality in interrupt handler tpm, tpm_tis: Move interrupt mask checks into own function tpm, tpm_tis: Only handle supported interrupts tpm, tpm_tis: Claim locality before writing interrupt registers tpm, tpm_tis: Do not skip reset of original interrupt vector tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failed tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE register ...
2023-04-24Merge branch 'x86-rep-insns': x86 user copy clarificationsLinus Torvalds
Merge my x86 user copy updates branch. This cleans up a lot of our x86 memory copy code, particularly for user accesses. I've been pushing for microarchitectural support for good memory copying and clearing for a long while, and it's been visible in how the kernel has aggressively used 'rep movs' and 'rep stos' whenever possible. And that micro-architectural support has been improving over the years, to the point where on modern CPU's the best option for a memory copy that would become a function call (as opposed to being something that can just be turned into individual 'mov' instructions) is now to inline the string instruction sequence instead. However, that only makes sense when we have the modern markers for this: the x86 FSRM and FSRS capabilities ("Fast Short REP MOVS/STOS"). So this cleans up a lot of our historical code, gets rid of the legacy marker use ("REP_GOOD" and "ERMS") from the memcpy/memset cases, and replaces it with that modern reality. Note that REP_GOOD and ERMS end up still being used by the known large cases (ie page copyin gand clearing). The reason much of this ends up being about user memory accesses is that the normal in-kernel cases are done by the compiler (__builtin_memcpy() and __builtin_memset()) and getting to the point where we can use our instruction rewriting to inline those to be string instructions will need some compiler support. In contrast, the user accessor functions are all entirely controlled by the kernel code, so we can change those arbitrarily. Thanks to Borislav Petkov for feedback on the series, and Jens testing some of this on micro-architectures I didn't personally have access to. * x86-rep-insns: x86: rewrite '__copy_user_nocache' function x86: remove 'zerorest' argument from __copy_user_nocache() x86: set FSRS automatically on AMD CPUs that have FSRM x86: improve on the non-rep 'copy_user' function x86: improve on the non-rep 'clear_user' function x86: inline the 'rep movs' in user copies for the FSRM case x86: move stac/clac from user copy routines into callers x86: don't use REP_GOOD or ERMS for user memory clearing x86: don't use REP_GOOD or ERMS for user memory copies x86: don't use REP_GOOD or ERMS for small memory clearing x86: don't use REP_GOOD or ERMS for small memory copies
2023-04-24Merge tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linuxLinus Torvalds
Pull ITER_UBUF updates from Jens Axboe: "This turns singe vector imports into ITER_UBUF, rather than ITER_IOVEC. The former is more trivial to iterate and advance, and hence a bit more efficient. From some very unscientific testing, ~60% of all iovec imports are single vector" * tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux: iov_iter: Mark copy_compat_iovec_from_user() noinline iov_iter: import single vector iovecs as ITER_UBUF iov_iter: convert import_single_range() to ITER_UBUF iov_iter: overlay struct iovec and ubuf/len iov_iter: set nr_segs = 1 for ITER_UBUF iov_iter: remove iov_iter_iovec() iov_iter: add iter_iov_addr() and iter_iov_len() helpers ALSA: pcm: check for user backed iterator, not specific iterator type IB/qib: check for user backed iterator, not specific iterator type IB/hfi1: check for user backed iterator, not specific iterator type iov_iter: add iter_iovec() helper block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly
2023-04-24Merge branches 'pm-core', 'pm-sleep', 'pm-opp' and 'pm-tools'Rafael J. Wysocki
Merge PM core changes, updates related to system sleep support, operating performance points (OPP) changes and power management utilities changes for 6.4-rc1: - Drop unnecessary (void *) conversions from the PM core (Li zeming). - Add sysfs files to represent time spent in a platform sleep state during suspend-to-idle and make AMD and Intel PMC drivers use them (Mario Limonciello). - Use of_property_present() for testing DT property presence (Rob Herring). - Add set_required_opps() callback to the 'struct opp_table', to make the code paths cleaner (Viresh Kumar). - Update the pm-graph siute of utilities to v5.11 with the following changes: * New script which allows users to install the latest pm-graph from the upstream github repo. * Update all the dmesg suspend/resume PM print formats to be able to process recent timelines using dmesg only. * Add ethtool output to the log for the system's ethernet device if ethtool exists. * Make the tool more robustly handle events where mangled dmesg or ftrace outputs do not include all the requisite data. - Make the sleepgraph utility recognize "CPU killed" messages (Xueqin Luo). * pm-core: PM: core: Remove unnecessary (void *) conversions * pm-sleep: platform/x86/intel/pmc: core: Report duration of time in HW sleep state platform/x86/intel/pmc: core: Always capture counters on suspend platform/x86/amd: pmc: Report duration of time in hw sleep state PM: Add sysfs files to represent time spent in hardware sleep state * pm-opp: OPP: Move required opps configuration to specialized callback OPP: Handle all genpd cases together in _set_required_opps() opp: Use of_property_present() for testing DT property presence * pm-tools: PM: tools: sleepgraph: Recognize "CPU killed" messages pm-graph: Update to v5.11
2023-04-24Merge branch 'pm-cpuidle'Rafael J. Wysocki
Merge a cpuidle change for 6.4-rc1: - Use of_property_present() for testing DT property presence in the cpuidle code (Rob Herring). * pm-cpuidle: cpuidle: Use of_property_present() for testing DT property presence
2023-04-24Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge cpufreq updates for 6.4-rc1: - Fix the frequency unit in cpufreq_verify_current_freq checks() (Sanjay Chandrashekara). - Make mode_state_machine in amd-pstate static (Tom Rix). - Make the cpufreq core require drivers with target_index() to set freq_table (Viresh Kumar). - Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang). - Use of_property_read_bool() for boolean properties in the pmac32 cpufreq driver (Rob Herring). - Make the cpufreq sysfs interface return proper error codes on obviously invalid input (qinyu). - Add guided autonomous mode support to the AMD P-state driver (Wyes Karny). - Make the Intel P-state driver enable HWP IO boost on all server platforms (Srinivas Pandruvada). - Add opp and bandwidth support to tegra194 cpufreq driver (Sumit Gupta). - Use of_property_present() for testing DT property presence (Rob Herring). - Remove MODULE_LICENSE in non-modules (Nick Alcock). - Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss). - Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof Kozlowski, Konrad Dybcio, and Bjorn Andersson). - DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and Bartosz Golaszewski). - Updates and fixes for mediatek driver (Jia-Wei Chang and AngeloGioacchino Del Regno). * pm-cpufreq: (29 commits) cpufreq: use correct unit when verify cur freq cpufreq: tegra194: add OPP support and set bandwidth cpufreq: amd-pstate: Make varaiable mode_state_machine static cpufreq: drivers with target_index() must set freq_table cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290 dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623 cpufreq: mediatek: raise proc/sram max voltage for MT8516 cpufreq: mediatek: fix KP caused by handler usage after regulator_put/clk_put cpufreq: mediatek: fix passing zero to 'PTR_ERR' cpufreq: pmac32: Use of_property_read_bool() for boolean properties cpufreq: Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry cpufreq: warn about invalid vals to scaling_max/min_freq interfaces Documentation: cpufreq: amd-pstate: Update amd_pstate status sysfs for guided cpufreq: amd-pstate: Add guided mode control support via sysfs cpufreq: amd-pstate: Add guided autonomous mode ...
2023-04-24Merge branches 'acpi-bus', 'acpi-video' and 'acpi-misc'Rafael J. Wysocki
Merge ACPI bus type driver changes, ACPI backlight driver updates and a series of cleanups related to of.h for 6.4-rc1: - Ensure that ACPI notify handlers are not running after removal and clean up code in acpi_sb_notify() (Rafael Wysocki). - Remove register_backlight_delay module option and code and remove quirks for false-positive backlight control support advertised on desktop boards (Hans de Goede). - Replace irqdomain.h include with struct declarations in ACPI headers and update several pieces of code previously including of.h implicitly through those headers (Rob Herring). * acpi-bus: ACPI: bus: Ensure that notify handlers are not running after removal ACPI: bus: Add missing braces to acpi_sb_notify() * acpi-video: ACPI: video: Remove desktops without backlight DMI quirks ACPI: video: Remove register_backlight_delay module option and code * acpi-misc: ACPI: Replace irqdomain.h include with struct declarations fpga: lattice-sysconfig-spi: Add explicit include for of.h tpm: atmel: Add explicit include for of.h virtio-mmio: Add explicit include for of.h pata: ixp4xx: Add explicit include for of.h ata: pata_macio: Add explicit include of irqdomain.h serial: 8250_tegra: Add explicit include for of.h net: rfkill-gpio: Add explicit include for of.h staging: iio: resolver: ad2s1210: Add explicit include for of.h iio: adc: ad7292: Add explicit include for of.h
2023-04-24Merge branches 'acpi-apei', 'acpi-properties', 'acpi-sbs' and 'acpi-thermal'Rafael J. Wysocki
Merge ACPI APEI changes, ACPI device properties handling update, ACPI SBS driver fixes and ACPI thermal driver cleanup for 6.4-rc1: - Make the APEI error injection code warn on invalid arguments when explicitly indicated by platform (Shuai Xue). - Add CXL error types to the error injection code in APEI (Tony Luck). - Refactor acpi_data_prop_read_single() (Andy Shevchenko). - Fix two issues in the ACPI SBS driver (Armin Wolf). - Replace ternary operator with min_t() in the generic ACPI thermal zone driver (Jiangshan Yi). * acpi-apei: ACPI: APEI: EINJ: warn on invalid argument when explicitly indicated by platform ACPI: APEI: EINJ: Add CXL error types * acpi-properties: ACPI: property: Refactor acpi_data_prop_read_single() * acpi-sbs: ACPI: SBS: Fix handling of Smart Battery Selectors ACPI: EC: Fix oops when removing custom query handlers ACPI: EC: Limit explicit removal of query handlers to custom query handlers * acpi-thermal: ACPI: thermal: Replace ternary operator with min_t()
generated by cgit (git 2.34.1) at 2025-09-12 02:43:15 +0000