| Age | Commit message (Collapse) | Author |
|---|
|
Inject and Clear Poison commands are optionally supported by CXL
memdev devices and are intended for use in debug environments only.
Add debugfs attributes for user access.
Documentation/ABI/testing/debugfs-cxl describes the usage.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/0c9ea8e671b8e58465d18722788b60d325c675c7.1681874357.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The cxl_poison trace event allows users to view the history of poison
list reads. With the addition of inject and clear poison capabilities,
users will expect similar tracing.
Add trace types 'Inject' and 'Clear' to the cxl_poison trace_event and
trace successful operations only.
If the driver finds that the DPA being injected or cleared of poison
is mapped in a region, that region info is included in the cxl_poison
trace event. Region reconfigurations can make this extra info useless
if the debug operations are not carefully managed.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/e20eb7c3029137b480ece671998c183da0477e2e.1681874357.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Inject and clear poison capabilities and intended for debug usage only.
In order to be useful in debug environments, the driver needs to allow
inject and clear operations on DPAs mapped in regions.
dev_warn_once() when either operation occurs.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/f911ca5277c9d0f9757b72d7e6842871bfff4fa2.1681874357.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CXL devices optionally support the CLEAR POISON mailbox command. Add
memdev driver support for clearing poison.
Per the CXL Specification (3.0 8.2.9.8.4.3), after receiving a valid
clear poison request, the device removes the address from the device's
Poison List and writes 0 (zero) for 64 bytes starting at address. If
the device cannot clear poison from the address, it returns a permanent
media error and -ENXIO is returned to the user.
Additionally, and per the spec also, it is not an error to clear poison
of an address that is not poisoned.
If the address is not contained in the device's dpa resource, or is
not 64 byte aligned, the driver returns -EINVAL without sending the
command to the device.
Poison clearing is intended for debug only and will be exposed to
userspace through debugfs. Restrict compilation to CONFIG_DEBUG_FS.
Implementation note: Although the CXL specification defines the clear
command to accept 64 bytes of 'write-data', this implementation always
uses zeroes as write-data.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/8682c30ec24bd9c45af5feccb04b02be51e58c0a.1681874357.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CXL devices optionally support the INJECT POISON mailbox command. Add
memdev driver support for the mailbox command.
Per the CXL Specification (3.0 8.2.9.8.4.2), after receiving a valid
inject poison request, the device will return poison when the address
is accessed through the CXL.mem driver. Injecting poison adds the address
to the device's Poison List and the error source is set to Injected.
In addition, the device adds a poison creation event to its internal
Informational Event log, updates the Event Status register, and if
configured, interrupts the host.
Also, per the CXL Specification, it is not an error to inject poison
into an address that already has poison present and no error is
returned from the device.
If the address is not contained in the device's dpa resource, or is
not 64 byte aligned, return -EINVAL without issuing the mbox command.
Poison injection is intended for debug only and will be exposed to
userspace through debugfs. Restrict compilation to CONFIG_DEBUG_FS.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/241c64115e6bd2effed9c7a20b08b3908dd7be8f.1681874357.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When a cxl_poison trace event is reported for a region, the poisoned
Device Physical Address (DPA) can be translated to a Host Physical
Address (HPA) for consumption by user space.
Translate and add the resulting HPA to the cxl_poison trace event.
Follow the device decode logic as defined in the CXL Spec 3.0 Section
8.2.4.19.13.
If no region currently maps the poison, assign ULLONG_MAX to the
cxl_poison event hpa field.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/6d3cd726f9042a59902785b0a2cb3ddfb70e0219.1681838292.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
User space may need to know which region, if any, maps the poison
address(es) logged in a cxl_poison trace event. Since the mapping
of DPAs (device physical addresses) to a region can change, the
kernel must provide this information at the time the poison list
is read. The event informs user space that at event <timestamp>
this <region> mapped to this <DPA>, which is poisoned.
The cxl_poison trace event is already wired up to log the region
name and uuid if it receives param 'struct cxl_region'.
In order to provide that cxl_region, add another method for gathering
poison - by committed endpoint decoder mappings. This method is only
available with CONFIG_CXL_REGION and is only used if a region actually
maps the memdev where poison is being read. After the region driver
reads the poison list for all the mapped resources, poison is read for
any remaining unmapped resources.
The default method remains: read the poison by memdev resource.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/438b01ccaa70592539e8eda4eb2b1d617ba03160.1681838292.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When a boolean 'true' is written to this attribute the memdev driver
retrieves the poison list from the device. The list consists of
addresses that are poisoned, or would result in poison if accessed,
and the source of the poison. This attribute is only visible for
devices supporting the capability. The retrieved errors are logged
as kernel events when cxl_poison event tracing is enabled.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/1081cfdc8a349dc754779642d584707e56db26ba.1681838291.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CXL devices may support the retrieval of a device poison list.
Add a new trace event that the CXL subsystem may use to log
the media-error records returned in the poison list.
Log each media-error record as a cxl_poison trace event of
type 'List'.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/de6196f5269483d886ab1834744f82d27189a666.1681838291.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CXL devices maintain a list of locations that are poisoned or result
in poison if the addresses are accessed by the host.
Per the spec, (CXL 3.0 8.2.9.8.4.1), the device returns this Poison
list as a set of Media Error Records that include the source of the
error, the starting device physical address, and length. The length is
the number of adjacent DPAs in the record and is in units of 64 bytes.
Retrieve the poison list.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/a1f332e817834ef8e89c0ff32e760308fb903346.1681838291.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Driver reads of the poison list are synchronized to ensure that a
reader does not get an incomplete list because their request
overlapped (was interrupted or preceded by) another read request
of the same DPA range. (CXL Spec 3.0 Section 8.2.9.8.4.1). The
driver maintains state information to achieve this goal.
To initialize the state, first recognize the poison commands in
the CEL (Command Effects Log). If the device supports Get Poison
List, allocate a single buffer for the poison list and protect it
with a lock.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/9078d180769be28a5087288b38cdfc827cae58bf.1681838291.git.alison.schofield@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The Get, Inject, and Clear poison commands are not available for
direct user access because they require kernel driver controls to
perform safely.
Further restrict access to these commands by requiring the selection
of the debugfs attribute 'cxl_raw_allow_all' to enable in raw mode.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/0e5cb41ffae2bab800957d3b9003eedfd0a2dfd5.1681838291.git.alison.schofield@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This driver does not use i2c, so there is no point in including
<linux/i2c.h>
Remove it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/df555e724d1b52bd9958c0bd729a774dfe0cf150.1682237387.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Remove an over-zealous sanity check of the array of MSI-X vectors to
be allocated for a device
* tag 'irq_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Remove over-zealous hardware size check in pci_msix_validate_entries()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a check in pegasus-notetaker driver to validate the type of pipe when
probing a new device
- a fix for Cypress touch controller to correctly parse maximum number
of touches.
* tag 'input-for-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cyttsp5 - fix sensing configuration data structure
Input: pegasus-notetaker - check pipe type when probing
|
|
It appears that dpaa_enable_tx_csum() only calls skb_reset_mac_header()
to get to the VLAN header using skb_mac_header().
We can use skb_vlan_eth_hdr() to get to the VLAN header based on
skb->data directly. This avoids spending a few cycles to set
skb->mac_header.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do
not assume mac_header is set in macvlan_broadcast()"), let's introduce a
skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get
to the VLAN header based on skb->data rather than based on the
skb_mac_header(skb).
We also consolidate the drivers that dereference skb->data to go through
this helper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for the Microchip LAN867x 10BASE-T1S family
(LAN8670/1/2). The driver supports P2MP with PLCA.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Smatch complains that:
mtk_wed_hw_add_debugfs() warn: 'dir' is an error pointer or valid
Debugfs checks are generally not supposed to be checked
for errors and it is not necessary here.
fix it by just deleting the dead code.
Signed-off-by: Wang Zhang <silver_code@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
This series lowers the CPU usage of the ice driver when using its
provided /dev/gnss*.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Older chips (like MT7622) use a different bit in ib2 to enable hardware
counter support. Add macros for both and select the appropriate bit.
Fixes: 3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The CXL subsystem is adding formal mechanisms for managing device
poison. Minimize the maintenance burden going forward, and maximize
the investment in common tooling by deprecating direct user access
to poison commands outside of CXL_MEM_RAW_COMMANDS debug scenarios.
A new cxl_deprecated_commands[] list is created for querying which
command ids defined in previous kernels are now deprecated.
CXL Media and Poison Management commands, opcodes 0x43XX, defined in
CXL 3.0 Spec, Table 8-93 are deprecated with one exception: Get Scan
Media Capabilities. Keep Get Scan Media Capabilities as it simply
provides information and has no impact on the device state.
Effectively all of the commands defined in:
commit 87815ee9d006 ("cxl/pci: Add media provisioning required commands")
...were defined prematurely and should have waited until the kernel
implementation was decided. To my knowledge there are no shipping
devices with poison support and no known tools that would regress with
this change.
Co-developed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/652197e9bc8885e6448d989405b9e50ee9d6b0a6.1681838291.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Not all endpoint CXL ports are associated with PCI devices. The cxl_test
infrastructure models 'struct cxl_port' instances hosted by platform
devices. Teach read_cdat_data() to be careful about non-pci hosted
cxl_memdev instances. Otherwise, cxl_test crashes with this signature:
RIP: 0010:xas_start+0x6d/0x290
[..]
Call Trace:
<TASK>
xas_load+0xa/0x50
xas_find+0x25b/0x2f0
xa_find+0x118/0x1d0
pci_find_doe_mailbox+0x51/0xc0
read_cdat_data+0x45/0x190 [cxl_core]
cxl_port_probe+0x10a/0x1e0 [cxl_port]
cxl_bus_probe+0x17/0x50 [cxl_core]
Some other cleanups are included like removing the single-use @uport
variable, and removing the indirection through 'struct cxl_dev_state' to
lookup the device that registered the memdev and may be a pci device.
Fixes: af0a6c3587dc ("cxl/pci: Use CDAT DOE mailbox created by PCI core")
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/168213190748.708404.16215095414060364800.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When setting the timeout for the menz069_wdt watchdog driver, we
erroneously read from the 'watchdog value register' (WVR) instead of the
'watchdog timer register' (WTR) and then write the value back into WTR.
This can potentially lead to wrong timeouts and wrong enable bit settings.
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230418172531.177349-3-jth@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Doing a 'cat /dev/watchdog0' with menz069_wdt as watchdog0 will result in
a NULL pointer dereference.
This happens because we're passing the wrong pointer to
watchdog_register_device(). Fix this by getting rid of the static
watchdog_device structure and use the one embedded into the driver's
per-instance private data.
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230418172531.177349-2-jth@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Implement restart handler for the Loongson-1 watchdog driver and
define the watchdog registers instead of including the legacy header.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230330112051.551648-3-keguang.zhang@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add watchdog driver for the StarFive JH7100 and JH7110 SoC.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230314132437.121534-3-xingyu.wu@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In order to support wireless offloading on MT7981 we need to load the
appropriate firmware. Recognize MT7981 and load mt7981_wo.bin.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If potentially no valid element is found, 'p' would contain an invalid
pointer past the iterator loop. To ensure 'p' is valid under any
circumstances, the kfree() should be within the loop body.
Additionally, Linus proposed to avoid any use of the list iterator
variable after the loop, in the attempt to move the list iterator
variable declaration into the macro to avoid any potential misuse after
the loop [1].
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230301-watchdog-avoid-iter-after-loop-v2-1-8411e3bbe0de@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
clang with W=1 reports
drivers/watchdog/s3c2410_wdt.c:311:35: error: unused function
'freq_to_wdt' [-Werror,-Wunused-function]
static inline struct s3c2410_wdt *freq_to_wdt(struct notifier_block *nb)
^
drivers/watchdog/s3c2410_wdt.c:446:19: error: unused function
's3c2410wdt_is_running' [-Werror,-Wunused-function]
static inline int s3c2410wdt_is_running(struct s3c2410_wdt *wdt)
^
These functions are not used, so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230321183439.1826823-1-trix@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here).
drivers/watchdog/aspeed_wdt.c:56:34: error: ‘aspeed_wdt_of_table’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230310223012.315897-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The watchdog countdown is supposed to begin when the device file is
opened. Instead, it would begin countdown upon the first write to or
close of the device file. Now, the ping operation is called within the
start operation which ensures the countdown begins. From experimenation,
it does not appear possible to do this with a single write including
both the start bit and the trigger bit. So, it is done as two distinct
writes.
Signed-off-by: Gregory Oakes <gregory.oakes@amd.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230316201312.17538-1-gregory.oakes@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Instead of declare 'reg' variable in read and write operations as a bare
'unsigned' type prefer to declate it as 'unsigned int'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230301065510.2818425-2-sergio.paracuellos@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Instead of using static global definitions in driver code, refactor code
introducing a new watchdog driver data structure and use it along the code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230301065510.2818425-1-sergio.paracuellos@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/624106aa86ef7e49f16b11b229528eabd63de8f7.1672485257.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/5d04e453a4da5cfafb56695a17157fa3ea296511.1672484831.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Make use of dev_err_probe() also for error paths that don't have to
handle -EPROBE_DEFER. While the code handing -EPROBE_DEFER isn't used
for these error paths, it still simpler as it cares for pretty printing
the error code and usually needs one code line less as it combines
message emitting and error returning. This also unifies the format of
the error messages.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230307065603.2253054-3-u.kleine-koenig@pengutronix.de
[groeck: Split long line to avoid checkpatch warning]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This is a preparation for making more use of dev_err_probe(). The idea
is that s3c2410_get_wdt_drv_data() (as it's called only by .probe()) can
make effective use of dev_err_probe() only if it returns an int. For
that the assignment to wdt->drv_data has to happen in the function. The
caller can then just pass on the return value in the error case.
This seems to be nicer for the compiler: bloatometer reports for an
ARCH=arm s3c6400_defconfig build:
add/remove: 1/1 grow/shrink: 0/1 up/down: 4/-64 (-60)
Function old new delta
__initcall__kmod_s3c2410_wdt__209_821_s3c2410wdt_driver_init6 - 4 +4
__initcall__kmod_s3c2410_wdt__209_819_s3c2410wdt_driver_init6 4 - -4
s3c2410wdt_probe 1332 1272 -60
There is no semantical change. (Just one minor difference: Before this
patch wdt->drv_data was always assigned, now that only happens in the
non-error case. That doesn't matter however as *wdt is freed in the
error case.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230307065603.2253054-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This allows to drop the .remove() function as it only exists to
unregister the watchdog device which is now done in a callback
registered by devm_watchdog_register_device().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230307070404.2256308-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This allows to drop the .remove() function as it only exists to
unregister the watchdog device which is now done in a callback
registered by devm_watchdog_register_device().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230307070404.2256308-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This allows to drop the .remove() function as it only exists to
unregister the watchdog device which is now done in a callback
registered by devm_watchdog_register_device().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230307070404.2256308-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
If the sbsa_gwdt is enabled by BIOS, the kernel set WDOG_HW_RUNNING bit
and keep it alive before anyone else would open it. When system suspend,
the sbsa_gwdt would not be disabled because WDOG_ACTIVE is not set. Then
the sbsa_gwdt would reach timeout since no one touch it during system
suspend.
To solve this, just test WDOG_HW_RUNNING bit in suspend and disable the
sbsa_gwdt if the bit is set, then reopen it accordingly in resume
process.
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230301113702.76437-1-wangwensheng4@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230303213716.2123717-34-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230303213716.2123717-33-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230303213716.2123717-32-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230303213716.2123717-31-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230303213716.2123717-30-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230303213716.2123717-28-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230303213716.2123717-26-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230303213716.2123717-25-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
