summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-09-06drm/i915: Implement WaEdpLinkRateDataReloadVille Syrjälä
A lot of modern laptops use the Parade PS8461E MUX for eDP switching. The MUX can operate in jitter cleaning mode or redriver mode, the first one resulting in higher link quality. The jitter cleaning mode needs to know the link rate used and the MUX achieves this by snooping the LINK_BW_SET, LINK_RATE_SELECT and SUPPORTED_LINK_RATES DPCD accesses. When the MUX is powered down (seems this can happen whenever the display is turned off) it loses track of the snooped link rates so when we do the LINK_RATE_SELECT write it no longer knowns which link rate we're selecting, and thus it falls back to the lower quality redriver mode. This results in unstable high link rates (eg. usually 8.1Gbps link rate no longer works correctly). In order to avoid all that let's re-snoop SUPPORTED_LINK_RATES from the sink at the start of every link training. Unfortunately we don't have a way to detect the presence of the MUX. It looks like the set of laptops equipped with this MUX is fairly large and contains devices from multiple manufacturers. It may also still be growing with new models. So a quirk doesn't seem like a very easily maintainable option, thus we shall attempt to do this unconditionally on all machines that use LINK_RATE_SELECT. Hopefully this extra DPCD read doesn't cause issues for any unaffected machine. If that turns out to be the case we'll need to convert this into a quirk in the future. Cc: stable@vger.kernel.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220902070319.15395-1-ville.syrjala@linux.intel.com Tested-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 25899c590cb5ba9b9f284c6ca8e7e9086793d641) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-09-06drm/i915/slpc: Let's fix the PCODE min freq table setup for SLPCRodrigo Vivi
We need to inform PCODE of a desired ring frequencies so PCODE update the memory frequencies to us. rps->min_freq and rps->max_freq are the frequencies used in that request. However they were unset when SLPC was enabled and PCODE never updated the memory freq. v2 (as Suggested by Ashutosh): if SLPC is in use, let's pick the right frequencies from the get_ia_constants instead of the fake init of rps' min and max. v3: don't forget the max <= min return v4: Move all the freq conversion to intel_rps.c. And the max <= min check to where it belongs. v5: (Ashutosh) Fix old comment s/50 HZ/50 MHz and add a doc explaining the "raw format" Fixes: 7ba79a671568 ("drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled") Cc: <stable@vger.kernel.org> # v5.15+ Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Tested-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220831214538.143950-1-rodrigo.vivi@intel.com (cherry picked from commit 018a7bdbb090b9155a6509a0d1a684db4afaa5b1) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-09-06drm/i915/bios: Copy the whole MIPI sequence blockVille Syrjälä
Turns out the MIPI sequence block version number and new block size fields are considered part of the block header and are not included in the reported new block size field itself. Bump up the block size appropriately so that we'll copy over the last five bytes of the block as well. For this particular machine those last five bytes included parts of the GPIO op for the backlight on sequence, causing the backlight no longer to turn back on: Sequence 6 - MIPI_SEQ_BACKLIGHT_ON Delay: 20000 us - GPIO index 0, number 0, set 0 (0x00) + GPIO index 1, number 70, set 1 (0x01) Cc: stable@vger.kernel.org Fixes: e163cfb4c96d ("drm/i915/bios: Make copies of VBT data blocks") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6652 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220829135834.8585-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit a06289f3f72431f3777af95ea1226b5b0abdc426) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-09-06net: usb: qmi_wwan: add Quectel RM520Njerry.meng
add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry.meng <jerry-meng@foxmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06drm/ttm: update bulk move object of ghost BOZhenGuo Yin
[Why] Ghost BO is released with non-empty bulk move object. There is a warning trace: WARNING: CPU: 19 PID: 1582 at ttm/ttm_bo.c:366 ttm_bo_release+0x2e1/0x2f0 [amdttm] Call Trace: amddma_resv_reserve_fences+0x10d/0x1f0 [amdkcl] amdttm_bo_put+0x28/0x30 [amdttm] amdttm_bo_move_accel_cleanup+0x126/0x200 [amdttm] amdgpu_bo_move+0x1a8/0x770 [amdgpu] ttm_bo_handle_move_mem+0xb0/0x140 [amdttm] amdttm_bo_validate+0xbf/0x100 [amdttm] [How] The resource of ghost BO should be moved to LRU directly, instead of using bulk move. The bulk move object of ghost BO should set to NULL before function ttm_bo_move_to_lru_tail_unlocked. v2: set bulk move to NULL manually if no resource associated with ghost BO Fixed: 5b951e487fd6bf5f ("drm/ttm: fix bulk move handling v2") Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220906084619.2545456-1-zhenguo.yin@amd.com
2022-09-06net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_dataChristian Marangi
of_device_get_match_data is called on priv->dev before priv->dev is actually set. Move of_device_get_match_data after priv->dev is correctly set to fix this kernel panic. Fixes: 3bb0844e7bcd ("net: dsa: qca8k: cache match data to speed up access") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220904215319.13070-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06nvme-tcp: fix regression that causes sporadic requests to time outSagi Grimberg
When we queue requests, we strive to batch as much as possible and also signal the network stack that more data is about to be sent over a socket with MSG_SENDPAGE_NOTLAST. This flag looks at the pending requests queued as well as queue->more_requests that is derived from the block layer last-in-batch indication. We set more_request=true when we flush the request directly from .queue_rq submission context (in nvme_tcp_send_all), however this is wrongly assuming that no other requests may be queued during the execution of nvme_tcp_send_all. Due to this, a race condition may happen where: 1. request X is queued as !last-in-batch 2. request X submission context calls nvme_tcp_send_all directly 3. nvme_tcp_send_all is preempted and schedules to a different cpu 4. request Y is queued as last-in-batch 5. nvme_tcp_send_all context sends request X+Y, however signals for both MSG_SENDPAGE_NOTLAST because queue->more_requests=true. ==> none of the requests is pushed down to the wire as the network stack is waiting for more data, both requests timeout. To fix this, we eliminate queue->more_requests and only rely on the queue req_list and send_list to be not-empty. Fixes: 122e5b9f3d37 ("nvme-tcp: optimize network stack with setting msg flags according to batch size") Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-06nvme-tcp: fix UAF when detecting digest errorsSagi Grimberg
We should also bail from the io_work loop when we set rd_enabled to true, so we don't attempt to read data from the socket when the TCP stream is already out-of-sync or corrupted. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-05hwmon: (tps23861) fix byte order in resistance registerAlexandru Gagniuc
The tps23861 registers are little-endian, and regmap_read_bulk() does not do byte order conversion. On BE machines, the bytes were swapped, and the interpretation of the resistance value was incorrect. To make it work on both big and little-endian machines, use le16_to_cpu() to convert the resitance register to host byte order. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Fixes: fff7b8ab22554 ("hwmon: add Texas Instruments TPS23861 driver") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220905142806.110598-1-mr.nuke.me@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-09-05Merge tag 'soc-fixes-6.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are the expected fixes for the SoC tree. I have let the patches pile up a little too long, so this is bigger than I would have liked. - Minor build fixes for Broadcom STB and NXP i.MX8M SoCs as well\ as TEE firmware - Updates to the MAINTAINERS file for the PolarFire SoC - Minor DT fixes for Renesas White Hawk and Arm Versatile and Juno platforms - A fix for a missing dependnecy in the NXP DPIO driver - Broadcom BCA fixes to the newly added devicetree files - Multiple fixes for Microchip AT91 based SoCs, dealing with self-refresh timings and regulator settings in DT - Several DT fixes for NXP i.MX platforms, dealing with incorrect GPIO settings, extraneous nodes, and a wrong clock setting" * tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits) soc: fsl: select FSL_GUTS driver for DPIO ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time ARM: dts: at91: sama7g5ek: specify proper regulator output ranges ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh ARM: at91: pm: fix self-refresh for sama7g5 soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B ARM: ixp4xx: fix typos in comments arm64: dts: renesas: r8a779g0: Fix HSCIF0 interrupt number tee: fix compiler warning in tee_shm_register() arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM arm64: dts: imx8mm-venice-gw7901: fix port/phy validation arm64: dts: verdin-imx8mm: add otg2 pd to usbphy soc: imx: gpcv2: Assert reset before ungating clock arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x ...
2022-09-05stmmac: intel: Simplify intel_eth_pci_remove()Christophe JAILLET
There is no point to call pcim_iounmap_regions() in the remove function, this frees a managed resource that would be release by the framework anyway. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()Greg Kroah-Hartman
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up to be much simpler logic and only create the root debugfs directory once when the driver is first accessed. That resolves the memory leak and makes things more obvious as to what the intent is. Cc: Marcin Wojtas <mw@semihalf.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: stable <stable@kernel.org> Fixes: 21da57a23125 ("net: mvpp2: add a debugfs interface for the Header Parser") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05nvmet: fix a use-after-freeBart Van Assche
Fix the following use-after-free complaint triggered by blktests nvme/004: BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350 Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460 Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e print_report.cold+0x36/0x1e2 kasan_report+0xb9/0xf0 __asan_load4+0x6b/0x80 blk_mq_complete_request_remote+0xac/0x350 nvme_loop_queue_response+0x1df/0x275 [nvme_loop] __nvmet_req_complete+0x132/0x4f0 [nvmet] nvmet_req_complete+0x15/0x40 [nvmet] nvmet_execute_io_connect+0x18a/0x1f0 [nvmet] nvme_loop_execute_work+0x20/0x30 [nvme_loop] process_one_work+0x56e/0xa70 worker_thread+0x2d1/0x640 kthread+0x183/0x1c0 ret_from_fork+0x1f/0x30 Cc: stable@vger.kernel.org Fixes: a07b4970f464 ("nvmet: add a generic NVMe target") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-05RDMA/mlx5: Fix UMR cleanup on error flow of driver initMaor Gottlieb
The cited commit removed from the cleanup flow of umr the checks if the resources were created. This could lead to null-ptr-deref in case that we had failure in mlx5_ib_stage_ib_reg_init stage. Fix it by adding new state to the umr that can say if the resources were created or not and check it in the umr cleanup flow before destroying the resources. Fixes: 04876c12c19e ("RDMA/mlx5: Move init and cleanup of UMR to umr.c") Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Link: https://lore.kernel.org/r/4cfa61386cf202e9ce330e8d228ce3b25a36326e.1661763459.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-05RDMA/mlx5: Set local port to one when accessing countersChris Mi
When accessing Ports Performance Counters Register (PPCNT), local port must be one if it is Function-Per-Port HCA that HCA_CAP.num_ports is 1. The offending patch can change the local port to other values when accessing PPCNT after enabling switchdev mode. The following syndrome will be printed: # cat /sys/class/infiniband/rdmap4s0f0/ports/2/counters/* # dmesg mlx5_core 0000:04:00.0: mlx5_cmd_check:756:(pid 12450): ACCESS_REG(0x805) op_mod(0x1) failed, status bad parameter(0x3), syndrome (0x1e5585) Fix it by setting local port to one for Function-Per-Port HCA. Fixes: 210b1f78076f ("IB/mlx5: When not in dual port RoCE mode, use provided port as native") Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Chris Mi <cmi@nvidia.com> Link: https://lore.kernel.org/r/6c5086c295c76211169e58dbd610fb0402360bab.1661763459.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-05RDMA/mlx5: Rely on RoCE fw cap instead of devlink when setting profileMaher Sanalla
When the RDMA auxiliary driver probes, it sets its profile based on devlink driverinit value. The latter might not be in sync with FW yet (In case devlink reload is not performed), thus causing a mismatch between RDMA driver and FW. This results in the following FW syndrome when the RDMA driver tries to adjust RoCE state, which fails the probe: "0xC1F678 | modify_nic_vport_context: roce_en set on a vport that doesn't support roce" To prevent this, select the PF profile based on FW RoCE capability instead of relying on devlink driverinit value. To provide backward compatibility of the RoCE disable feature, on older FW's where roce_rw is not set (FW RoCE capability is read-only), keep the current behavior e.g., rely on devlink driverinit value. Fixes: fbfa97b4d79f ("net/mlx5: Disable roce at HCA level") Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Link: https://lore.kernel.org/r/cb34ce9a1df4a24c135cb804db87f7d2418bd6cc.1661763459.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-05IB/core: Fix a nested dead lock as part of ODP flowYishai Hadas
Fix a nested dead lock as part of ODP flow by using mmput_async(). From the below call trace [1] can see that calling mmput() once we have the umem_odp->umem_mutex locked as required by ib_umem_odp_map_dma_and_lock() might trigger in the same task the exit_mmap()->__mmu_notifier_release()->mlx5_ib_invalidate_range() which may dead lock when trying to lock the same mutex. Moving to use mmput_async() will solve the problem as the above exit_mmap() flow will be called in other task and will be executed once the lock will be available. [1] [64843.077665] task:kworker/u133:2 state:D stack: 0 pid:80906 ppid: 2 flags:0x00004000 [64843.077672] Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] [64843.077719] Call Trace: [64843.077722] <TASK> [64843.077724] __schedule+0x23d/0x590 [64843.077729] schedule+0x4e/0xb0 [64843.077735] schedule_preempt_disabled+0xe/0x10 [64843.077740] __mutex_lock.constprop.0+0x263/0x490 [64843.077747] __mutex_lock_slowpath+0x13/0x20 [64843.077752] mutex_lock+0x34/0x40 [64843.077758] mlx5_ib_invalidate_range+0x48/0x270 [mlx5_ib] [64843.077808] __mmu_notifier_release+0x1a4/0x200 [64843.077816] exit_mmap+0x1bc/0x200 [64843.077822] ? walk_page_range+0x9c/0x120 [64843.077828] ? __cond_resched+0x1a/0x50 [64843.077833] ? mutex_lock+0x13/0x40 [64843.077839] ? uprobe_clear_state+0xac/0x120 [64843.077860] mmput+0x5f/0x140 [64843.077867] ib_umem_odp_map_dma_and_lock+0x21b/0x580 [ib_core] [64843.077931] pagefault_real_mr+0x9a/0x140 [mlx5_ib] [64843.077962] pagefault_mr+0xb4/0x550 [mlx5_ib] [64843.077992] pagefault_single_data_segment.constprop.0+0x2ac/0x560 [mlx5_ib] [64843.078022] mlx5_ib_eqe_pf_action+0x528/0x780 [mlx5_ib] [64843.078051] process_one_work+0x22b/0x3d0 [64843.078059] worker_thread+0x53/0x410 [64843.078065] ? process_one_work+0x3d0/0x3d0 [64843.078073] kthread+0x12a/0x150 [64843.078079] ? set_kthread_struct+0x50/0x50 [64843.078085] ret_from_fork+0x22/0x30 [64843.078093] </TASK> Fixes: 36f30e486dce ("IB/core: Improve ODP to use hmm_range_fault()") Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/74d93541ea533ef7daec6f126deb1072500aeb16.1661251841.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-05driver core: fix driver_set_override() issue with empty stringsGreg Kroah-Hartman
Python likes to send an empty string for some sysfs files, including the driver_override field. When commit 23d99baf9d72 ("PCI: Use driver_set_override() instead of open-coding") moved the PCI core to use the driver core function instead of hand-rolling their own handler, this showed up as a regression from some userspace tools, like DPDK. Fix this up by actually looking at the length of the string first instead of trusting that userspace got it correct. Fixes: 23d99baf9d72 ("PCI: Use driver_set_override() instead of open-coding") Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable <stable@kernel.org> Reported-by: Stephen Hemminger <stephen@networkplumber.org> Tested-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220901163734.3583106-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05bonding: accept unsolicited NA messageHangbin Liu
The unsolicited NA message with all-nodes multicast dest address should be valid, as this also means the link could reach the target. Also rename bond_validate_ns() to bond_validate_na(). Reported-by: LiLiang <liali@redhat.com> Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05bonding: use unspecified address if no available link local addressHangbin Liu
When ns_ip6_target was set, the ipv6_dev_get_saddr() will be called to get available source address and send IPv6 neighbor solicit message. If the target is global address, ipv6_dev_get_saddr() will get any available src address. But if the target is link local address, ipv6_dev_get_saddr() will only get available address from our interface, i.e. the corresponding bond interface. But before bond interface up, all the address is tentative, while ipv6_dev_get_saddr() will ignore tentative address. This makes we can't find available link local src address, then bond_ns_send() will not be called and no NS message was sent. Finally bond interface will keep in down state. Fix this by sending NS with unspecified address if there is no available source address. Reported-by: LiLiang <liali@redhat.com> Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "s390: - PCI interpretation compile fixes RISC-V: - fix unused variable warnings in vcpu_timer.c - move extern sbi_ext declarations to a header x86: - check validity of argument to KVM_SET_MP_STATE - use guest's global_ctrl to completely disable guest PEBS - fix a memory leak on memory allocation failure - mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES - fix build failure with Clang integrated assembler - fix MSR interception - always flush TLBs when enabling dirty logging" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: check validity of argument to KVM_SET_MP_STATE perf/x86/core: Completely disable guest PEBS via guest's global_ctrl KVM: x86: fix memoryleak in kvm_arch_vcpu_create() KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES KVM: s390: pci: Hook to access KVM lowlevel from VFIO riscv: kvm: move extern sbi_ext declarations to a header riscv: kvm: vcpu_timer: fix unused variable warnings KVM: selftests: Fix ambiguous mov in KVM_ASM_SAFE() KVM: selftests: Fix KVM_EXCEPTION_MAGIC build with Clang KVM: VMX: Heed the 'msr' argument in msr_write_intercepted() kvm: x86: mmu: Always flush TLBs when enabling dirty logging kvm: x86: mmu: Drop the need_remote_flush() function
2022-09-04Merge tag 'wireless-2022-09-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes berg says: ==================== We have a handful of fixes: - fix DMA from stack in wilc1000 driver - fix crash on chip reset failure in mt7921e - fix for the reported warning on aggregation timer expiry - check packet lengths in hwsim virtio paths - fix compiler warnings/errors with AAD construction by using struct_group - fix Intel 4965 driver rate scale operation - release channel contexts correctly in mac80211 mlme code ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-04RDMA/siw: Pass a pointer to virt_to_page()Linus Walleij
Functions that work on a pointer to virtual memory such as virt_to_pfn() and users of that function such as virt_to_page() are supposed to pass a pointer to virtual memory, ideally a (void *) or other pointer. However since many architectures implement virt_to_pfn() as a macro, this function becomes polymorphic and accepts both a (unsigned long) and a (void *). If we instead implement a proper virt_to_pfn(void *addr) function the following happens (occurred on arch/arm): drivers/infiniband/sw/siw/siw_qp_tx.c:32:23: warning: incompatible integer to pointer conversion passing 'dma_addr_t' (aka 'unsigned int') to parameter of type 'const void *' [-Wint-conversion] drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: warning: passing argument 1 of 'virt_to_pfn' makes pointer from integer without a cast [-Wint-conversion] drivers/infiniband/sw/siw/siw_qp_tx.c:538:36: warning: incompatible integer to pointer conversion passing 'unsigned long long' to parameter of type 'const void *' [-Wint-conversion] Fix this with an explicit cast. In one case where the SIW SGE uses an unaligned u64 we need a double cast modifying the virtual address (va) to a platform-specific uintptr_t before casting to a (void *). Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Cc: linux-rdma@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220902215918.603761-1-linus.walleij@linaro.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-03Merge tag 'gpio-fixes-for-v6.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "A a set of fixes from the GPIO subsystem. Most are small driver fixes except the realtek-otto driver patch which is pretty big but addresses a significant flaw that can cause the CPU to stay infinitely busy on uncleared ISR on some platforms. Summary: - MAINTAINERS update - fix resource leaks in gpio-mockup and gpio-pxa - add missing locking in gpio-pca953x - use 32-bit I/O in gpio-realtek-otto - make irq_chip structures immutable in four more drivers" * tag 'gpio-fixes-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: ws16c48: Make irq_chip immutable gpio: 104-idio-16: Make irq_chip immutable gpio: 104-idi-48: Make irq_chip immutable gpio: 104-dio-48e: Make irq_chip immutable gpio: realtek-otto: switch to 32-bit I/O gpio: pca953x: Add mutex_lock for regcache sync in PM gpio: mockup: remove gpio debugfs when remove device gpio: pxa: use devres for the clock struct MAINTAINERS: rectify entry for XILINX GPIO DRIVER
2022-09-03gpio: ws16c48: Make irq_chip immutableWilliam Breathitt Gray
Kernel warns about mutable irq_chips: "not an immutable chip, please consider fixing!" Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-03gpio: 104-idio-16: Make irq_chip immutableWilliam Breathitt Gray
Kernel warns about mutable irq_chips: "not an immutable chip, please consider fixing!" Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-03gpio: 104-idi-48: Make irq_chip immutableWilliam Breathitt Gray
Kernel warns about mutable irq_chips: "not an immutable chip, please consider fixing!" Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-03gpio: 104-dio-48e: Make irq_chip immutableWilliam Breathitt Gray
Kernel warns about mutable irq_chips: "not an immutable chip, please consider fixing!" Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-03Merge tag 'for-linus-6.0-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - a minor fix for the Xen grant driver - a small series fixing a recently introduced problem in the Xen blkfront/blkback drivers with negotiation of feature usage * tag 'for-linus-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/grants: prevent integer overflow in gnttab_dma_alloc_pages() xen-blkfront: Cache feature_persistent value before advertisement xen-blkfront: Advertise feature-persistent as user requested xen-blkback: Advertise feature-persistent as user requested
2022-09-03Merge tag 'input-for-v6.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - GT1158 ID added to Goodix touchscreen driver - Boeder Force Feedback Wheel USB added to iforce joystick driver - fixup for iforce driver to avoid hangups - fix autoloading of rk805-pwrkey driver. * tag 'input-for-v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: iforce - add support for Boeder Force Feedback Wheel Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag Input: goodix - add compatible string for GT1158 MAINTAINERS: add include/dt-bindings/input to INPUT DRIVERS Input: rk805-pwrkey - fix module autoloading Input: goodix - add support for GT1158 dt-bindings: input: touchscreen: add compatible string for Goodix GT1158
2022-09-03Merge tag 'tty-6.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty/serial/vt driver fixes for 6.0-rc4 that resolve a number of reported issues: - n_gsm fixups for previous changes that caused problems - much-reported serdev crash fix that showed up in 6.0-rc1 - vt font selection bugfix - kerneldoc build warning fixes - other tiny serial core fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: n_gsm: avoid call of sleeping functions from atomic context tty: n_gsm: replace kicktimer with delayed_work tty: n_gsm: initialize more members at gsm_alloc_mux() tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf() tty: serial: atmel: Preserve previous USART mode if RS485 disabled tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete tty: Fix lookahead_buf crash with serdev serial: fsl_lpuart: RS485 RTS polariy is inverse vt: Clear selection before changing the font serial: document start_rx member at struct uart_ops
2022-09-03Merge tag 'staging-6.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are three small staging driver fixes for 6.0-rc4 that resolve some reported problems and add some a device id: - new device id for r8188eu driver - use-after-free bugfixes for the rtl8712 driver - fix up firmware dependency problem for the r8188eu driver All of these have been in linux-next for a while with no reported problems" * tag 'staging-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8712: fix use after free bugs staging: r8188eu: Add Rosewill USB-N150 Nano to device tables staging: r8188eu: add firmware dependency
2022-09-03Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Here's a collection of primarily clk driver fixes, with a couple fixes to the core framework. We had to revert out a commit that affected boot on some devices that have the CLK_OPS_PARENT_ENABLE flag set. It isn't critical to have that fix so we'll try again next time. Driver side fixes include: - Plug an OF-node refcount bug in the TI clk driver - Fix the error handling in the raspberry pi firmware get_rate so that errors don't look like valid frequencies - Avoid going out of bounds in the raspberry pi driver too if the video firmware returns something we're not expecting" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops" clk: bcm: rpi: Show clock id limit in error case clk: bcm: rpi: Add missing newline clk: bcm: rpi: Prevent out-of-bounds access clk: bcm: rpi: Fix error handling of raspberrypi_fw_get_rate clk: core: Fix runtime PM sequence in clk_core_unprepare() clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops clk: ti: Fix missing of_node_get() ti_find_clock_provider()
2022-09-03Merge tag 'hwmon-for-v6.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix out of bounds access in gpio-fan driver - Fix VOUT margin caching in PMBus core - Avoid error message after -EPROBE_DEFER from devm_regulator_register() * tag 'hwmon-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gpio-fan) Fix array out of bounds access hwmon: (pmbus) Fix vout margin caching hwmon: (pmbus) Use dev_err_probe() to filter -EPROBE_DEFER error messages
2022-09-03wifi: mac80211_hwsim: check length for virtio packetsSoenke Huster
An invalid packet with a length shorter than the specified length in the netlink header can lead to use-after-frees and slab-out-of-bounds in the processing of the netlink attributes, such as the following: BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010 Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12 Workqueue: events hwsim_virtio_rx_work Call Trace: <TASK> dump_stack_lvl+0x45/0x5d print_report.cold+0x5e/0x5e5 kasan_report+0xb1/0x1c0 __nla_validate_parse+0x1258/0x2010 __nla_parse+0x22/0x30 hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0 hwsim_virtio_rx_work+0x1b2/0x370 process_one_work+0x8df/0x1530 worker_thread+0x575/0x11a0 kthread+0x29d/0x340 ret_from_fork+0x22/0x30 </TASK> Discarding packets with an invalid length solves this. Therefore, skb->len must be set at reception. Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6 Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-02 (i40e, iavf) This series contains updates to i40e and iavf drivers. Przemyslaw adds reset to ADQ configuration to allow for setting of rate limit beyond TC0 for i40e. Ivan Vecera does not free client on failure to open which could cause NULL pointer dereference to occur on i40e. He also detaches device during reset to prevent NDO calls with could cause races for iavf. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== This series contains updates to ice driver only. Przemyslaw fixes memory leak of DMA memory due to incorrect freeing of rx_buf. Michal S corrects incorrect call to free memory. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03net: dsa: microchip: fix kernel oops on ksz8 switchesOleksij Rempel
After driver refactoring we was running ksz9477 specific CPU port configuration on ksz8 family which ended with kernel oops. So, make sure we run this code only on ksz9477 compatible devices. Tested on KSZ8873 and KSZ9477. Fixes: da8cd08520f3 ("net: dsa: microchip: add support for common phylink mac link up") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03xen-netback: only remove 'hotplug-status' when the vif is actually destroyedPaul Durrant
Removing 'hotplug-status' in backend_disconnected() means that it will be removed even in the case that the frontend unilaterally disconnects (which it is free to do at any time). The consequence of this is that, when the frontend attempts to re-connect, the backend gets stuck in 'InitWait' rather than moving straight to 'Connected' (which it can do because the hotplug script has already run). Instead, the 'hotplug-status' mode should be removed in netback_remove() i.e. when the vif really is going away. Fixes: 0f4558ae9187 ("Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"") Signed-off-by: Paul Durrant <pdurrant@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03Revert "arch_topology: Make cluster topology span at least SMT CPUs"Greg Kroah-Hartman
This reverts commit 6b66ca0bac1b9cee7608d7c4dc59b699458b4cb8 as it breaks the build on some arches as reported by the kernel test robot. Link: https://lore.kernel.org/r/202209030824.SouwDV5M-lkp@intel.com Reported-by: kernel test robot <lkp@intel.com> Fixes: 6b66ca0bac1b ("arch_topology: Make cluster topology span at least SMT CPUs") Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Ionela Voinescu <ionela.voinescu@arm.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-02net: fec: Use a spinlock to guard `fep->ptp_clk_on`Csókás Bence
Mutexes cannot be taken in a non-preemptible context, causing a panic in `fec_ptp_save_state()`. Replacing `ptp_clk_mutex` by `tmreg_lock` fixes this. Fixes: 6a4d7234ae9a ("net: fec: ptp: avoid register access when ipg clock is disabled") Fixes: f79959220fa5 ("fec: Restart PPS after link state change") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/all/20220827160922.642zlcd5foopozru@pengutronix.de/ Signed-off-by: Csókás Bence <csokas.bence@prolan.hu> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis iMX6 Link: https://lore.kernel.org/r/20220901140402.64804-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02net: fec: add pm_qos support on imx6q platformWei Fang
There is a very low probability that tx timeout will occur during suspend and resume stress test on imx6q platform. So we add pm_qos support to prevent system from entering low level idles which may affect the transmission of tx. Signed-off-by: Wei Fang <wei.fang@nxp.com> Link: https://lore.kernel.org/r/20220830070148.2021947-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02Merge tag 'block-6.0-2022-09-02' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - error handling fix for the new auth code (Hannes Reinecke) - fix unhandled tcp states in nvmet_tcp_state_change (Maurizio Lombardi) - add NVME_QUIRK_BOGUS_NID for Lexar NM610 (Shyamin Ayesh) - Add documentation for the ublk driver merged in this merge window (Ming) * tag 'block-6.0-2022-09-02' of git://git.kernel.dk/linux-block: Documentation: document ublk nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change() nvmet-auth: add missing goto in nvmet_setup_auth() nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610
2022-09-02Merge tag 'mmc-v6.0-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - Fix workaround for SD UHS-I voltage switch * tag 'mmc-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage switch failure mmc: core: Fix UHS-I SD 1.8V workaround branch
2022-09-02Merge tag 'drm-fixes-2022-09-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular fixes pull. One core dma-buf fix, then two weeks of i915 fixes, a lot of amdgpu fixes mostly for new IP, and a bunch of msm fixes, mostly modesetting ones. Nothing seems too bad at this point. dma-buf/dma-resv: - Fence-handling fix i915: - GVT fixes including fix for a CommetLake regression in mmio table and misc doc and typo fixes - Fix CCS handling - Fix for guc requests after reset - Display DSI related fixes - Display backlight related fixes - Fix for a null pointer dereference - HDMI related quirk for ECS Liva Q2 with GLK graphics - Skip wm/ddb readout for disabled pipes amdgpu: - FRU error message fix - MES 11 updates - DCN 3.2.x fixes - DCN 3.1.4 fixes - Fix possible use after free in CS IOCTL - SMU 13.0.x fixes - Fix iolink reporting on devices with direct connections to CPU - GFX10 tap delay firmware fixes msm: - Fix for inconsistent indenting in msm_dsi_dphy_timing_calc_v3(). - Fix to make eDP the first connector in the connected list. - Fix to populate intf_cfg correctly before calling reset_intf_cfg(). - Specify the correct number of DSI regulators for SDM660. - Specify the correct number of DSI regulators for MSM8996. - Fix for removing DP_RECOVERED_CLOCK_OUT_EN bit for tps4 link training - Fix probe-deferral crash in gpu devfreq - Fix gpu debugfs deadlock" * tag 'drm-fixes-2022-09-02' of git://anongit.freedesktop.org/drm/drm: (51 commits) drm/amd/amdgpu: skip ucode loading if ucode_size == 0 drm/amdgpu: only init tap_delay ucode when it's included in ucode binary drm/amd/display: Fix black flash when switching from ODM2to1 to ODMBypass drm/amd/display: Fix check for stream and plane drm/amd/display: Re-initialize viewport after pipe merge drm/amd/display: Use correct plane for CAB cursor size allocation drm/amdgpu: ensure no PCIe peer access for CPU XGMI iolinks drm/amd/pm: bump SMU 13.0.0 driver_if header version drm/amd/pm: use vbios carried pptable for all SMU13.0.7 SKUs drm/amd/pm: use vbios carried pptable for those supported SKUs drm/amd/display: fix wrong register access drm/amd/display: use actual cursor size instead of max for CAB allocation drm/amd/display: disable display fresh from MALL on an edge case for DCN321 drm/amd/display: Fix CAB cursor size allocation for DCN32/321 drm/amd/display: Missing HPO instance added drm/amd/display: set dig fifo read start level to 7 before dig fifo reset drm/amdgpu: Fix use-after-free in amdgpu_cs_ioctl drm/amd/display: Fix OTG H timing reset for dcn314 drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming drm/amdgpu: Update mes_v11_api_def.h ...
2022-09-02iavf: Detach device during reset taskIvan Vecera
iavf_reset_task() takes crit_lock at the beginning and holds it during whole call. The function subsequently calls iavf_init_interrupt_scheme() that grabs RTNL. Problem occurs when userspace initiates during the reset task any ndo callback that runs under RTNL like iavf_open() because some of that functions tries to take crit_lock. This leads to classic A-B B-A deadlock scenario. To resolve this situation the device should be detached in iavf_reset_task() prior taking crit_lock to avoid subsequent ndos running under RTNL and reattach the device at the end. Fixes: 62fe2a865e6d ("i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capability") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Tested-by: Vitaly Grinberg <vgrinber@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02i40e: Fix kernel crash during module removalIvan Vecera
The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] <TASK> [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set. Fixes: 0ef2d5afb12d ("i40e: KISS the client interface") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02i40e: Fix ADQ rate limiting for PFPrzemyslaw Patynowski
Fix HW rate limiting for ADQ. Fallback to kernel queue selection for ADQ, as it is network stack that decides which queue to use for transmit with ADQ configured. Reset PF after creation of VMDq2 VSIs required for ADQ, as to reprogram TX queue contexts in i40e_configure_tx_ring. Without this patch PF would limit TX rate only according to TC0. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02Merge tag 'driver-core-6.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core fixes for some oft-reported problems in 6.0-rc1. They include: - a bunch of reverts to handle driver_deferred_probe_check_state() problems that were part of the 6.0-rc1 merge. - firmware_loader bugfixes now that the code is being properly tested and used by others - arch_topology fix - deferred driver probe bugfix to solve a long-suffering amba bus problem that many people have reported. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware_loader: Fix memory leak in firmware upload firmware_loader: Fix use-after-free during unregister arch_topology: Silence early cacheinfo errors when non-existent driver core: Don't probe devices after bus_type.match() probe deferral Revert "iommu/of: Delete usage of driver_deferred_probe_check_state()" Revert "PM: domains: Delete usage of driver_deferred_probe_check_state()" Revert "net: mdio: Delete usage of driver_deferred_probe_check_state()" Revert "driver core: Delete driver_deferred_probe_check_state()"
2022-09-02Merge tag 'char-misc-6.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc and other driver fixes for 6.0-rc4. Included in here are: - binder fixes for previous fixes, and a few more fixes uncovered by them. - iio driver fixes - soundwire driver fixes - fastrpc driver fixes for memory corruption on some hardware - peci driver fix - mhi driver fix All of these have been in linux-next with no reported problems" * tag 'char-misc-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: binder: fix alloc->vma_vm_mm null-ptr dereference misc: fastrpc: increase maximum session count misc: fastrpc: fix memory corruption on open misc: fastrpc: fix memory corruption on probe soundwire: qcom: fix device status array range bus: mhi: host: Fix up null pointer access in mhi_irq_handler soundwire: qcom: remove duplicate reset control get iio: light: cm32181: make cm32181_pm_ops static iio: ad7292: Prevent regulator double disable dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins iio: adc: mcp3911: use correct formula for AD conversion iio: adc: mcp3911: correct "microchip,device-addr" property Revert "binder_alloc: Add missing mmap_lock calls when using the VMA" binder_alloc: Add missing mmap_lock calls when using the VMA binder: fix UAF of ref->proc caused by race condition iio: light: cm3605: Fix an error handling path in cm3605_probe() iio: adc: mcp3911: make use of the sign bit peci: cpu: Fix use-after-free in adev_release() peci: aspeed: fix error check return value of platform_get_irq()
generated by cgit (git 2.34.1) at 2025-09-29 02:33:02 +0000