summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-05-06nvme: register fdp parameters with the block layerKeith Busch
Register the device data placement limits if supported. This is just registering the limits with the block layer. Nothing beyond reporting these attributes is happening in this patch. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Link: https://lore.kernel.org/r/20250506121732.8211-11-joshi.k@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-06nvme: pass a void pointer to nvme_get/set_features for the resultChristoph Hellwig
That allows passing in structures instead of the u32 result, and thus reduce the amount of bit shifting and masking required to parse the result. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Link: https://lore.kernel.org/r/20250506121732.8211-9-joshi.k@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-06nvme: add a nvme_get_log_lsi helperChristoph Hellwig
For log pages that need to pass in a LSI value, while at the same time not touching all the existing nvme_get_log callers. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Link: https://lore.kernel.org/r/20250506121732.8211-8-joshi.k@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-06can: mcp251xfd: mcp251xfd_remove(): fix order of unregistration callsMarc Kleine-Budde
If a driver is removed, the driver framework invokes the driver's remove callback. A CAN driver's remove function calls unregister_candev(), which calls net_device_ops::ndo_stop further down in the call stack for interfaces which are in the "up" state. With the mcp251xfd driver the removal of the module causes the following warning: | WARNING: CPU: 0 PID: 352 at net/core/dev.c:7342 __netif_napi_del_locked+0xc8/0xd8 as can_rx_offload_del() deletes the NAPI, while it is still active, because the interface is still up. To fix the warning, first unregister the network interface, which calls net_device_ops::ndo_stop, which disables the NAPI, and then call can_rx_offload_del(). Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250502-can-rx-offload-del-v1-1-59a9b131589d@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06can: mcp251xfd: fix TDC setting for low data bit ratesKelsey Maes
The TDC is currently hardcoded enabled. This means that even for lower CAN-FD data bitrates (with a DBRP (data bitrate prescaler) > 2) a TDC is configured. This leads to a bus-off condition. ISO 11898-1 section 11.3.3 says "Transmitter delay compensation" (TDC) is only applicable if DBRP is 1 or 2. To fix the problem, switch the driver to use the TDC calculation provided by the CAN driver framework (which respects ISO 11898-1 section 11.3.3). This has the positive side effect that userspace can control TDC as needed. Demonstration of the feature in action: | $ ip link set can0 up type can bitrate 125000 dbitrate 500000 fd on | $ ip -details link show can0 | 3: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 72 qdisc pfifo_fast state UP mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can <FD> state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0 | bitrate 125000 sample-point 0.875 | tq 50 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 10 brp 2 | mcp251xfd: tseg1 2..256 tseg2 1..128 sjw 1..128 brp 1..256 brp_inc 1 | dbitrate 500000 dsample-point 0.875 | dtq 125 dprop-seg 6 dphase-seg1 7 dphase-seg2 2 dsjw 1 dbrp 5 | mcp251xfd: dtseg1 1..32 dtseg2 1..16 dsjw 1..16 dbrp 1..256 dbrp_inc 1 | tdcv 0..63 tdco 0..63 | clock 40000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 65536 tso_max_segs 65535 gro_max_size 65536 parentbus spi parentdev spi0.0 | $ ip link set can0 up type can bitrate 1000000 dbitrate 4000000 fd on | $ ip -details link show can0 | 3: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 72 qdisc pfifo_fast state UP mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can <FD,TDC-AUTO> state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0 | bitrate 1000000 sample-point 0.750 | tq 25 prop-seg 14 phase-seg1 15 phase-seg2 10 sjw 5 brp 1 | mcp251xfd: tseg1 2..256 tseg2 1..128 sjw 1..128 brp 1..256 brp_inc 1 | dbitrate 4000000 dsample-point 0.700 | dtq 25 dprop-seg 3 dphase-seg1 3 dphase-seg2 3 dsjw 1 dbrp 1 | tdco 7 | mcp251xfd: dtseg1 1..32 dtseg2 1..16 dsjw 1..16 dbrp 1..256 dbrp_inc 1 | tdcv 0..63 tdco 0..63 | clock 40000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 65536 tso_max_segs 65535 gro_max_size 65536 parentbus spi parentdev spi0.0 There has been some confusion about the MCP2518FD using a relative or absolute TDCO due to the datasheet specifying a range of [-64,63]. I have a custom board with a 40 MHz clock and an estimated loop delay of 100 to 216 ns. During testing at a data bit rate of 4 Mbit/s I found that using can_get_relative_tdco() resulted in bus-off errors. The final TDCO value was 1 which corresponds to a 10% SSP in an absolute configuration. This behavior is expected if the TDCO value is really absolute and not relative. Using priv->can.tdc.tdco instead results in a final TDCO of 8, setting the SSP at exactly 80%. This configuration works. The automatic, manual, and off TDC modes were tested at speeds up to, and including, 8 Mbit/s on real hardware and behave as expected. Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reported-by: Kelsey Maes <kelsey@vpprocess.com> Closes: https://lore.kernel.org/all/C2121586-C87F-4B23-A933-845362C29CA1@vpprocess.com Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Kelsey Maes <kelsey@vpprocess.com> Link: https://patch.msgid.link/20250430161501.79370-1-kelsey@vpprocess.com [mkl: add comment] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06can: m_can: m_can_class_allocate_dev(): initialize spin lock on device probeAntonios Salios
The spin lock tx_handling_spinlock in struct m_can_classdev is not being initialized. This leads the following spinlock bad magic complaint from the kernel, eg. when trying to send CAN frames with cansend from can-utils: | BUG: spinlock bad magic on CPU#0, cansend/95 | lock: 0xff60000002ec1010, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 | CPU: 0 UID: 0 PID: 95 Comm: cansend Not tainted 6.15.0-rc3-00032-ga79be02bba5c #5 NONE | Hardware name: MachineWare SIM-V (DT) | Call Trace: | [<ffffffff800133e0>] dump_backtrace+0x1c/0x24 | [<ffffffff800022f2>] show_stack+0x28/0x34 | [<ffffffff8000de3e>] dump_stack_lvl+0x4a/0x68 | [<ffffffff8000de70>] dump_stack+0x14/0x1c | [<ffffffff80003134>] spin_dump+0x62/0x6e | [<ffffffff800883ba>] do_raw_spin_lock+0xd0/0x142 | [<ffffffff807a6fcc>] _raw_spin_lock_irqsave+0x20/0x2c | [<ffffffff80536dba>] m_can_start_xmit+0x90/0x34a | [<ffffffff806148b0>] dev_hard_start_xmit+0xa6/0xee | [<ffffffff8065b730>] sch_direct_xmit+0x114/0x292 | [<ffffffff80614e2a>] __dev_queue_xmit+0x3b0/0xaa8 | [<ffffffff8073b8fa>] can_send+0xc6/0x242 | [<ffffffff8073d1c0>] raw_sendmsg+0x1a8/0x36c | [<ffffffff805ebf06>] sock_write_iter+0x9a/0xee | [<ffffffff801d06ea>] vfs_write+0x184/0x3a6 | [<ffffffff801d0a88>] ksys_write+0xa0/0xc0 | [<ffffffff801d0abc>] __riscv_sys_write+0x14/0x1c | [<ffffffff8079ebf8>] do_trap_ecall_u+0x168/0x212 | [<ffffffff807a830a>] handle_exception+0x146/0x152 Initializing the spin lock in m_can_class_allocate_dev solves that problem. Fixes: 1fa80e23c150 ("can: m_can: Introduce a tx_fifo_in_flight counter") Signed-off-by: Antonios Salios <antonios@mwa.re> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250425111744.37604-2-antonios@mwa.re Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06brd: fix discard end sectorYu Kuai
brd_do_discard() just aligned start sector to page, this can only work if the discard size if at least one page. For example: blkdiscard /dev/ram0 -o 5120 -l 1024 In this case, size = (1024 - (8192 - 5120)), which is a huge value. Fix the problem by round_down() the end sector. Fixes: 9ead7efc6f3f ("brd: implement discard support") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250506061756.2970934-4-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-06brd: fix aligned_sector from brd_do_discard()Yu Kuai
The calculation is just wrong, fix it by round_up(). Fixes: 9ead7efc6f3f ("brd: implement discard support") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250506061756.2970934-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-06brd: protect page with rcuYu Kuai
Currently, after fetching the page by xa_load() in IO path, there is no protection and page can be freed concurrently by discard: cpu0 brd_submit_bio brd_do_bvec page = brd_lookup_page cpu1 brd_submit_bio brd_do_discard page = __xa_erase() __free_page() // page UAF Fix the problem by protecting page with rcu. Meanwhile, if page is already freed, also prevent BUG_ON() by skipping the write, and user will get zero data later if there is no page. Fixes: 9ead7efc6f3f ("brd: implement discard support") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250506061756.2970934-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-06ublk: consolidate UBLK_IO_FLAG_OWNED_BY_SRV checksCaleb Sander Mateos
Every ublk I/O command except UBLK_IO_FETCH_REQ checks that the ublk_io has UBLK_IO_FLAG_OWNED_BY_SRV set. Consolidate the separate checks into a single one in __ublk_ch_uring_cmd(), analogous to those for UBLK_IO_FLAG_ACTIVE and UBLK_IO_FLAG_NEED_GET_DATA. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250505172624.1121839-1-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-06dm: fix copying after src array boundariesTudor Ambarus
The blammed commit copied to argv the size of the reallocated argv, instead of the size of the old_argv, thus reading and copying from past the old_argv allocated memory. Following BUG_ON was hit: [ 3.038929][ T1] kernel BUG at lib/string_helpers.c:1040! [ 3.039147][ T1] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP ... [ 3.056489][ T1] Call trace: [ 3.056591][ T1] __fortify_panic+0x10/0x18 (P) [ 3.056773][ T1] dm_split_args+0x20c/0x210 [ 3.056942][ T1] dm_table_add_target+0x13c/0x360 [ 3.057132][ T1] table_load+0x110/0x3ac [ 3.057292][ T1] dm_ctl_ioctl+0x424/0x56c [ 3.057457][ T1] __arm64_sys_ioctl+0xa8/0xec [ 3.057634][ T1] invoke_syscall+0x58/0x10c [ 3.057804][ T1] el0_svc_common+0xa8/0xdc [ 3.057970][ T1] do_el0_svc+0x1c/0x28 [ 3.058123][ T1] el0_svc+0x50/0xac [ 3.058266][ T1] el0t_64_sync_handler+0x60/0xc4 [ 3.058452][ T1] el0t_64_sync+0x1b0/0x1b4 [ 3.058620][ T1] Code: f800865e a9bf7bfd 910003fd 941f48aa (d4210000) [ 3.058897][ T1] ---[ end trace 0000000000000000 ]--- [ 3.059083][ T1] Kernel panic - not syncing: Oops - BUG: Fatal exception Fix it by copying the size of src, and not the size of dst, as it was. Fixes: 5a2a6c428190 ("dm: always update the array size in realloc_argv on success") Cc: stable@vger.kernel.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-05-06drm/panel: simple: Update timings for AUO G101EVN010Kevin Baker
Switch to panel timings based on datasheet for the AUO G101EVN01.0 LVDS panel. Default timings were tested on the panel. Previous mode-based timings resulted in horizontal display shift. Signed-off-by: Kevin Baker <kevinb@ventureresearch.com> Fixes: 4fb86404a977 ("drm/panel: simple: Add AUO G101EVN010 panel support") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
2025-05-06net: ethernet: mtk_eth_soc: do not reset PSE when setting FEFrank Wunderlich
Remove redundant PSE reset. When setting FE register there is no need to reset PSE, doing so may cause FE to work abnormal. Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/3a5223473e086a4b54a2b9a44df7d9ddcc2bc75a Fixes: dee4dd10c79aa ("net: ethernet: mtk_eth_soc: ppe: add support for multiple PPEs") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://patch.msgid.link/18f0ac7d83f82defa3342c11ef0d1362f6b81e88.1746406763.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-06net: ethernet: mtk_eth_soc: reset all TX queues on DMA freeDaniel Golle
The purpose of resetting the TX queue is to reset the byte and packet count as well as to clear the software flow control XOFF bit. MediaTek developers pointed out that netdev_reset_queue would only resets queue 0 of the network device. Queues that are not reset may cause unexpected issues. Packets may stop being sent after reset and "transmit timeout" log may be displayed. Import fix from MediaTek's SDK to resolve this issue. Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/319c0d9905579a46dc448579f892f364f1f84818 Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/c9ff9adceac4f152239a0f65c397f13547639175.1746406763.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-06drm/ttm: Remove the struct ttm_backup abstractionThomas Hellström
The abstraction was previously added to support separate ttm_backup implementations. However with the current implementation casting from a struct file to a struct ttm_backup, we run into trouble since struct file may have randomized the layout and gcc complains. Remove the struct ttm_backup abstraction Cc: dri-devel@lists.freedesktop.org Cc: Matthew Brost <matthew.brost@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Kees Cook <kees@kernel.org> Closes: https://lore.kernel.org/dri-devel/9c8dbbafdaf9f3f089da2cde5a772d69579b3795.camel@linux.intel.com/T/#mb153ab9216cb813b92bdeb36f391ad4808c2ba29 Suggested-by: Christian König <christian.koenig@amd.com> Fixes: 70d645deac98 ("drm/ttm: Add helpers for shrinking") Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250502130014.3156-1-thomas.hellstrom@linux.intel.com
2025-05-06drm/ttm: Fix ttm_backup kerneldocThomas Hellström
The docs were not properly updated from an earlier version of the code. Fixes: e7b5d23e5d47 ("drm/ttm: Provide a shmem backup implementation") Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250502130101.3185-1-thomas.hellstrom@linux.intel.com
2025-05-06i2c: omap: fix deprecated of_property_read_bool() useJohan Hovold
Using of_property_read_bool() for non-boolean properties is deprecated and results in a warning during runtime since commit c141ecc3cecd ("of: Warn when of_property_read_bool() is used on non-boolean properties"). Fixes: b6ef830c60b6 ("i2c: omap: Add support for setting mux") Cc: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Link: https://lore.kernel.org/r/20250415075230.16235-1-johan+linaro@kernel.org Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2025-05-05virtio-net: free xsk_buffs on error in virtnet_xsk_pool_enable()Jakub Kicinski
The selftests added to our CI by Bui Quang Minh recently reveals that there is a mem leak on the error path of virtnet_xsk_pool_enable(): unreferenced object 0xffff88800a68a000 (size 2048): comm "xdp_helper", pid 318, jiffies 4294692778 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): __kvmalloc_node_noprof+0x402/0x570 virtnet_xsk_pool_enable+0x293/0x6a0 (drivers/net/virtio_net.c:5882) xp_assign_dev+0x369/0x670 (net/xdp/xsk_buff_pool.c:226) xsk_bind+0x6a5/0x1ae0 __sys_bind+0x15e/0x230 __x64_sys_bind+0x72/0xb0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Acked-by: Jason Wang <jasowang@redhat.com> Fixes: e9f3962441c0 ("virtio_net: xsk: rx: support fill with xsk buffer") Link: https://patch.msgid.link/20250430163836.3029761-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-05virtio-net: don't re-enable refill work too early when NAPI is disabledJakub Kicinski
Commit 4bc12818b363 ("virtio-net: disable delayed refill when pausing rx") fixed a deadlock between reconfig paths and refill work trying to disable the same NAPI instance. The refill work can't run in parallel with reconfig because trying to double-disable a NAPI instance causes a stall under the instance lock, which the reconfig path needs to re-enable the NAPI and therefore unblock the stalled thread. There are two cases where we re-enable refill too early. One is in the virtnet_set_queues() handler. We call it when installing XDP: virtnet_rx_pause_all(vi); ... virtnet_napi_tx_disable(..); ... virtnet_set_queues(..); ... virtnet_rx_resume_all(..); We want the work to be disabled until we call virtnet_rx_resume_all(), but virtnet_set_queues() kicks it before NAPIs were re-enabled. The other case is a more trivial case of mis-ordering in __virtnet_rx_resume() found by code inspection. Taking the spin lock in virtnet_set_queues() (requested during review) may be unnecessary as we are under rtnl_lock and so are all paths writing to ->refill_enabled. Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com> Fixes: 4bc12818b363 ("virtio-net: disable delayed refill when pausing rx") Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Link: https://patch.msgid.link/20250430163758.3029367-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-05mm: remove NR_BOUNCE zone statChristoph Hellwig
The stat is always 0 now, so remove it and hardwire the user visible output to 0. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250505081138.3435992-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-05scsi: remove the no_highmem flag in the hostChristoph Hellwig
All users are gone now. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250505081138.3435992-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-05usb-storage: reject probe of device one non-DMA HCDs when using highmemChristoph Hellwig
usb-storage is the last user of the block layer bounce buffering now, and only uses it for HCDs that do not support DMA on highmem configs. Remove this support and fail the probe so that the block layer bounce buffering can go away. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250505081138.3435992-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-05scsi: make ppa depend on !HIGHMEMChristoph Hellwig
This is one of the last drivers depending on the block layer bounce buffering code. Restrict it to run on non-highmem configs so that the bounce buffering code can be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250505081138.3435992-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-05scsi: make imm depend on !HIGHMEMChristoph Hellwig
This is one of the last drivers depending on the block layer bounce buffering code. Restrict it to run on non-highmem configs so that the bounce buffering code can be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250505081138.3435992-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-05scsi: make aha152x depend on !HIGHMEMChristoph Hellwig
This is one of the last drivers depending on the block layer bounce buffering code. Restrict it to run on non-highmem configs so that the bounce buffering code can be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250505081138.3435992-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-05Merge tag 'soc-fixes-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "The main changes are once more for the NXP i.MX platform, addressing multiple regressions in recent devicetree updates for the i.MX8MM and i.MX6ULL SoCs, a PCIe fix for i.MX9 and a MAINTAINERS file update to disambiguate NXP i.MX SoCs from Sony IMX image sensors. The stm32 platform devicetree files get some compatibility fixes for the interrupt controller node. Another compatibility fix is done for the Arm Morello platform's cache controller node. The code changes are all for firmware drivers, fixing kernel-side bugs on the Arm FF-A and SCMI drivers" * tag 'soc-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp23 SoCs arm64: dts: st: Adjust interrupt-controller for stm32mp23 SoCs arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp21 SoCs arm64: dts: st: Adjust interrupt-controller for stm32mp21 SoCs arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp25 SoCs arm64: dts: st: Adjust interrupt-controller for stm32mp25 SoCs arm64: dts: imx8mm-verdin: Link reg_usdhc2_vqmmc to usdhc2 MAINTAINERS: add exclude for dt-bindings to imx entry ARM: dts: opos6ul: add ksz8081 phy properties arm64: dts: imx95: Correct the range of PCIe app-reg region arm64: dts: imx8mp: configure GPU and NPU clocks in nominal DTSI arm64: dts: morello: Fix-up cache nodes firmware: arm_ffa: Skip Rx buffer ownership release if not acquired firmware: arm_scmi: Fix timeout checks on polling path firmware: arm_scmi: Balance device refcount when destroying devices
2025-05-05xhci: dbc: Avoid event polling busyloop if pending rx transfers are inactive.Mathias Nyman
Event polling delay is set to 0 if there are any pending requests in either rx or tx requests lists. Checking for pending requests does not work well for "IN" transfers as the tty driver always queues requests to the list and TRBs to the ring, preparing to receive data from the host. This causes unnecessary busylooping and cpu hogging. Only set the event polling delay to 0 if there are pending tx "write" transfers, or if it was less than 10ms since last active data transfer in any direction. Cc: Łukasz Bartosik <ukaszb@chromium.org> Fixes: fb18e5bb9660 ("xhci: dbc: poll at different rate depending on data transfer activity") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250505125630.561699-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-05usb: xhci: Don't trust the EP Context cycle bit when moving HW dequeueMichal Pecio
VIA VL805 doesn't bother updating the EP Context cycle bit when the endpoint halts. This is seen by patching xhci_move_dequeue_past_td() to print the cycle bits of the EP Context and the TRB at hw_dequeue and then disconnecting a flash drive while reading it. Actual cycle state is random as expected, but the EP Context bit is always 1. This means that the cycle state produced by this function is wrong half the time, and then the endpoint stops working. Work around it by looking at the cycle bit of TD's end_trb instead of believing the Endpoint or Stream Context. Specifically: - rename cycle_found to hw_dequeue_found to avoid confusion - initialize new_cycle from td->end_trb instead of hw_dequeue - switch new_cycle toggling to happen after end_trb is found Now a workload which regularly stalls the device works normally for a few hours and clearly demonstrates the HW bug - the EP Context bit is not updated in a new cycle until Set TR Dequeue overwrites it: [ +0,000298] sd 10:0:0:0: [sdc] Attached SCSI disk [ +0,011758] cycle bits: TRB 1 EP Ctx 1 [ +5,947138] cycle bits: TRB 1 EP Ctx 1 [ +0,065731] cycle bits: TRB 0 EP Ctx 1 [ +0,064022] cycle bits: TRB 0 EP Ctx 0 [ +0,063297] cycle bits: TRB 0 EP Ctx 0 [ +0,069823] cycle bits: TRB 0 EP Ctx 0 [ +0,063390] cycle bits: TRB 1 EP Ctx 0 [ +0,063064] cycle bits: TRB 1 EP Ctx 1 [ +0,062293] cycle bits: TRB 1 EP Ctx 1 [ +0,066087] cycle bits: TRB 0 EP Ctx 1 [ +0,063636] cycle bits: TRB 0 EP Ctx 0 [ +0,066360] cycle bits: TRB 0 EP Ctx 0 Also tested on the buggy ASM1042 which moves EP Context dequeue to the next TRB after errors, one problem case addressed by the rework that implemented this loop. In this case hw_dequeue can be enqueue, so simply picking the cycle bit of TRB at hw_dequeue wouldn't work. Commit 5255660b208a ("xhci: add quirk for host controllers that don't update endpoint DCS") tried to solve the stale cycle problem, but it was more complex and got reverted due to a reported issue. Cc: Jonathan Bell <jonathan@raspberrypi.org> Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250505125630.561699-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-05s390/dcssblk: Fix build error with CONFIG_DAX=m and CONFIG_DCSSBLK=yGerald Schaefer
After commit 653d7825c149 ("dcssblk: mark DAX broken, remove FS_DAX_LIMITED support") moved the "select DAX" from config DCSSBLK to the new config DCSSBLK_DAX, randconfig tests could result in build errors like this: s390-linux-ld: drivers/s390/block/dcssblk.o: in function `dcssblk_shared_store': drivers/s390/block/dcssblk.c:417: undefined reference to `kill_dax' s390-linux-ld: drivers/s390/block/dcssblk.c:418: undefined reference to `put_dax' This is because it's now possible to have CONFIG_DCSSBLK=y, but CONFIG_DAX=m. Fix this by adding "depends on DAX || DAX=n" to config DCSSBLK, to make it explicit that we want either no DAX, or the same "y/m" for both config DAX and DCSSBLK, similar to config BLK_DEV_DM. This also requires removing the "select DAX" from config DCSSBLK_DAX, or else there would be a recursive dependency detected. DCSSBLK_DAX is marked as BROKEN at the moment, and won't work well with DAX anyway, so it doesn't really matter if it is selected. Fixes: 653d7825c149 ("dcssblk: mark DAX broken, remove FS_DAX_LIMITED support") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504291604.pvjonhWX-lkp@intel.com/ Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2025-05-05clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()Sebastian Andrzej Siewior
On x86 during boot, clockevent_i8253_disable() can be invoked via x86_late_time_init -> hpet_time_init() -> pit_timer_init() which happens with enabled interrupts. If some of the old i8253 hardware is actually used then lockdep will notice that i8253_lock is used in hard interrupt context. This causes lockdep to complain because it observed the lock being acquired with interrupts enabled and in hard interrupt context. Make clockevent_i8253_disable() acquire the lock with raw_spinlock_irqsave() to cure this. [ tglx: Massage change log and use guard() ] Fixes: c8c4076723dac ("x86/timer: Skip PIT initialization on modern chipsets") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20250404133116.p-XRWJXf@linutronix.de
2025-05-05loop: Add sanity check for read/write_iterLizhi Xu
Some file systems do not support read_iter/write_iter, such as selinuxfs in this issue. So before calling them, first confirm that the interface is supported and then call it. It is releavant in that vfs_iter_read/write have the check, and removal of their used caused szybot to be able to hit this issue. Fixes: f2fed441c69b ("loop: stop using vfs_iter__{read,write} for buffered I/O") Reported-by: syzbot+6af973a3b8dfd2faefdc@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6af973a3b8dfd2faefdc Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250428143626.3318717-1-lizhi.xu@windriver.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-05Merge branch 'block-6.15' into for-6.16/blockJens Axboe
Merge 6.15 block fixes in, once again, to resolve conflicts with the fixes for ublk that went into mainline and the 6.16 ublk updates. * block-6.15: nvmet-auth: always free derived key data nvmet-tcp: don't restore null sk_state_change nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS nvme-tcp: fix premature queue removal and I/O failover nvme-pci: add quirks for WDC Blue SN550 15b7:5009 nvme-pci: add quirks for device 126f:1001 nvme-pci: fix queue unquiesce check on slot_reset ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req ublk: enhance check for register/unregister io buffer command ublk: decouple zero copy from user copy selftests: ublk: fix UBLK_F_NEED_GET_DATA Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-05spi: loopback-test: Do not split 1024-byte hexdumpsGeert Uytterhoeven
spi_test_print_hex_dump() prints buffers holding less than 1024 bytes in full. Larger buffers are truncated: only the first 512 and the last 512 bytes are printed, separated by a truncation message. The latter is confusing in case the buffer holds exactly 1024 bytes, as all data is printed anyway. Fix this by printing buffers holding up to and including 1024 bytes in full. Fixes: 84e0c4e5e2c4ef42 ("spi: add loopback test driver to allow for spi_master regression tests") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/37ee1bc90c6554c9347040adabf04188c8f704aa.1746184171.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-05drm/i915/slpc: Balance the inc/dec for num_waitersVinay Belgaumkar
As seen in some recent failures, SLPC num_waiters value is < 0. This happens because the inc/dec are not balanced. We should skip decrement for the same conditions as the increment. Currently, we do that for power saving profile mode. This patch also ensures that num_waiters is incremented in the case min_softlimit is at boost freq. It ensures that we don't reduce the frequency while this request is in flight. v2: Add Fixes tags Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13598 Fixes: f864a29afc32 ("drm/i915/slpc: Optmize waitboost for SLPC") Fixes: 4a82ceb04ad4 ("drm/i915/slpc: Add sysfs for SLPC power profiles") Cc: Sk Anirban <sk.anirban@intel.com> Reviewed-by: Sk Anirban <sk.anirban@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://lore.kernel.org/r/20250428183555.3250021-1-vinay.belgaumkar@intel.com (cherry picked from commit d26e55085f4b7a63677670db827541209257b313) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-05-04Merge tag 'edac_urgent_for_v6.15_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: - Test the correct structure member when handling correctable errors and avoid spurious interrupts, in altera_edac * tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/altera: Set DDR and SDMMC interrupt mask before registration EDAC/altera: Test the correct error reg offset
2025-05-04Merge tag 'irq-urgent-2025-05-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: - Prevent NULL pointer dereference in msi_domain_debug_show() - Fix crash in the qcom-mpm irqchip driver when configuring interrupts for non-wake GPIOs * tag 'irq-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs genirq/msi: Prevent NULL pointer dereference in msi_domain_debug_show()
2025-05-03Merge tag 'i2c-for-6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: - imx-lpi2c: fix clock error handling sequence in probe * tag 'i2c-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx-lpi2c: Fix clock count when probe defers
2025-05-03Merge tag 'sound-6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A bunch of small fixes. Mostly driver specific. - An OOB access fix in core UMP rawmidi conversion code - Fix for ASoC DAPM hw_params widget sequence - Make retry of usb_set_interface() errors for flaky devices - Fix redundant USB MIDI name strings - Quirks for various HP and ASUS models with HD-audio, and Jabra Evolve 65 USB-audio - Cirrus Kunit test fixes - Various fixes for ASoC Intel, stm32, renesas, imx-card, and simple-card" * tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits) ASoC: amd: ps: fix for irq handler return status ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers ASoC: stm32: sai: add a check on minimal kernel frequency ASoC: stm32: sai: skip useless iterations on kernel rate loop ALSA: hda/realtek - Add more HP laptops which need mute led fixup ALSA: hda/realtek: Fix built-mic regression on other ASUS models ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format ALSA: usb-audio: Fix duplicated name in MIDI substream names ALSA: ump: Fix buffer overflow at UMP SysEx message conversion ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013 ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot ASoC: amd: acp: Fix NULL pointer deref on acp resume path ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS() ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[] ...
2025-05-02Merge tag 'spi-fix-v6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A fairly small pile of fixes, plus one new compatible string addition to the Synopsis driver for a new platform. The most notable thing is the fix for divide by zeros in spi-mem if an operation has no dummy bytes" * tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: tegra114: Don't fail set_cs_timing when delays are zero spi: spi-qpic-snand: fix NAND_READ_LOCATION_2 register handling spi: spi-mem: Add fix to avoid divide error spi: dt-bindings: snps,dw-apb-ssi: Add compatible for SOPHGO SG2042 SoC spi: dt-bindings: snps,dw-apb-ssi: Merge duplicate compatible entry spi: spi-qpic-snand: propagate errors from qcom_spi_block_erase() spi: stm32-ospi: Fix an error handling path in stm32_ospi_probe()
2025-05-02Merge tag 'pm-6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix three recent regressions, two in cpufreq and one in the Intel Soundwire driver, and an unchecked MSR access in the intel_pstate driver: - Fix a recent regression causing systems where frequency tables are used by cpufreq to have issues with setting frequency limits (Rafael Wysocki) - Fix a recent regressions causing frequency boost settings to become out-of-sync if platform firmware updates the registers associated with frequency boost during system resume (Viresh Kumar) - Fix a recent regression causing resume failures to occur in the Intel Soundwire driver if the device handled by it is in runtime suspend before a system-wide suspend (Rafael Wysocki) - Fix an unchecked MSR aceess in the intel_pstate driver occurring when CPUID indicates no turbo, but the driver attempts to enable turbo frequencies due to a misleading value read from an MSR (Srinivas Pandruvada)" * tag 'pm-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode soundwire: intel_auxdevice: Fix system suspend/resume handling cpufreq: Fix setting policy limits when frequency tables are used cpufreq: ACPI: Re-sync CPU boost state on system resume
2025-05-02Merge tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly drm fixes, amdgpu and xe as usual, the new adp driver has a bunch of vblank fixes, then a bunch of small fixes across the board. Seems about the right level for this time in the release cycle. ttm: - docs warning fix kunit - fix leak in shmem tests fdinfo: - driver unbind race fix amdgpu: - Fix possible UAF in HDCP - XGMI dma-buf fix - NBIO 7.11 fix - VCN 5.0.1 fix xe: - EU stall locking fix and disabling on VF - Documentation fix kernel version supporting hwmon entries - SVM fixes on error handling i915: - Fix build for CONFIG_DRM_I915_PXP=n nouveau: - fix race condition in fence handling ivpu: - interrupt handling fix - D0i2 test mode fix adp: - vblank fixes mipi-dbi: - timing fix" * tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernel: (23 commits) drm/gpusvm: set has_dma_mapping inside mapping loop drm/xe/hwmon: Fix kernel version documentation for temperature drm/xe/eustall: Do not support EU stall on SRIOV VF drm/xe/eustall: Resolve a possible circular locking dependency drm/amdgpu: Add DPG pause for VCN v5.0.1 drm/amdgpu: Fix offset for HDP remap in nbio v7.11 drm/amdgpu: Fail DMABUF map of XGMI-accessible memory drm/amd/display: Fix slab-use-after-free in hdcp drm/mipi-dbi: Fix blanking for non-16 bit formats drm/tests: shmem: Fix memleak drm/xe/guc: Fix capture of steering registers drm/xe/svm: fix dereferencing error pointer in drm_gpusvm_range_alloc() drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS drm: adp: Remove pointless irq_lock spin lock drm: adp: Enable vblank interrupts in crtc's .atomic_enable drm: adp: Handle drm_crtc_vblank_get() errors drm: adp: Use spin_lock_irqsave for drm device event_lock drm/fdinfo: Protect against driver unbind drm/ttm: fix the warning for hit_low and evict_low accel/ivpu: Fix the D0i2 disable test mode ...
2025-05-02Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge cpufreq fixes for 6.15-rc5: - Fix a recent regression causing systems where frequency tables are used by cpufreq to have issues with setting frequency limits (Rafael Wysocki). - Fix a recent regressions causing frequency boost settings to become out-of-sync if platform firmware updates the registers associated with them during system resume (Viresh Kumar). - Fix an unchecked MSR aceess in the intel_pstate driver occurring when CPUID indicates no turbo, but the driver attempts to enable turbo frequencies due to a misleading value read from an MSR (Srinivas Pandruvada). * pm-cpufreq: cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode cpufreq: Fix setting policy limits when frequency tables are used cpufreq: ACPI: Re-sync CPU boost state on system resume
2025-05-02drm/v3d: Add job to pending list if the reset was skippedMaíra Canal
When a CL/CSD job times out, we check if the GPU has made any progress since the last timeout. If so, instead of resetting the hardware, we skip the reset and let the timer get rearmed. This gives long-running jobs a chance to complete. However, when `timedout_job()` is called, the job in question is removed from the pending list, which means it won't be automatically freed through `free_job()`. Consequently, when we skip the reset and keep the job running, the job won't be freed when it finally completes. This situation leads to a memory leak, as exposed in [1] and [2]. Similarly to commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when GPU is still active"), this patch ensures the job is put back on the pending list when extending the timeout. Cc: stable@vger.kernel.org # 6.0 Reported-by: Daivik Bhatia <dtgs1208@gmail.com> Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12227 [1] Closes: https://github.com/raspberrypi/linux/issues/6817 [2] Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Link: https://lore.kernel.org/r/20250430210643.57924-1-mcanal@igalia.com Signed-off-by: Maíra Canal <mcanal@igalia.com>
2025-05-02irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOsStephan Gerhold
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not have a corresponding MPM pin and should not be handled inside the MPM driver. The IRQ domain hierarchy is always applied, so it's required to explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but irq-qcom-mpm is currently missing the check. This is causing crashes when setting up interrupts for non-wake GPIOs: root@rb1:~# gpiomon -c gpiochip1 10 irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1 Unable to handle kernel paging request at virtual address ffff8000a1dc3820 Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT) pc : mpm_set_type+0x80/0xcc lr : mpm_set_type+0x5c/0xcc Call trace: mpm_set_type+0x80/0xcc (P) qcom_mpm_set_type+0x64/0x158 irq_chip_set_type_parent+0x20/0x38 msm_gpio_irq_set_type+0x50/0x530 __irq_set_trigger+0x60/0x184 __setup_irq+0x304/0x6bc request_threaded_irq+0xc8/0x19c edge_detector_setup+0x260/0x364 linereq_create+0x420/0x5a8 gpio_ioctl+0x2d4/0x6c0 Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that MPM is removed entirely from the hierarchy for non-wake GPIOs. Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver") Reported-by: Alexey Klimov <alexey.klimov@linaro.org> Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexey Klimov <alexey.klimov@linaro.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org
2025-05-02Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor updates, both in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Remove redundant query_complete trace scsi: myrb: Fix spelling mistake "statux" -> "status"
2025-05-02Merge tag 'block-6.15-20250502' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - fix queue unquiesce check on PCI slot_reset (Keith Busch) - fix premature queue removal and I/O failover in nvme-tcp (Michael Liang) - don't restore null sk_state_change (Alistair Francis) - select CONFIG_TLS where needed (Alistair Francis) - always free derived key data (Hannes Reinecke) - more quirks (Wentao Guan) - ublk zero copy fix - ublk selftest fix for UBLK_F_NEED_GET_DATA * tag 'block-6.15-20250502' of git://git.kernel.dk/linux: nvmet-auth: always free derived key data nvmet-tcp: don't restore null sk_state_change nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS nvme-tcp: fix premature queue removal and I/O failover nvme-pci: add quirks for WDC Blue SN550 15b7:5009 nvme-pci: add quirks for device 126f:1001 nvme-pci: fix queue unquiesce check on slot_reset ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req ublk: enhance check for register/unregister io buffer command ublk: decouple zero copy from user copy selftests: ublk: fix UBLK_F_NEED_GET_DATA
2025-05-02Merge tag 'pinctrl-v6.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Fix potential NULL dereference in the i.MX driver - Fix the pull up/down resistor values in the Meson driver - Fix the mapping of the PHY LED pins in the Airhoa driver - Fix EINT interrupts on older controllers and a debounce value issue in the Mediatek driver - Fix an erronoeus PINGROUP define in the Qualcomm driver * tag 'pinctrl-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: Fix PINGROUP definition for sm8750 pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init() pinctrl: mediatek: Fix new design debounce issue pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines pinctrl: meson: define the pull up/down resistor value as 60 kOhm pinctrl: imx: Return NULL if no group is matched and found
2025-05-02Merge tag 'iommu-fixes-v6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu fixes from Joerg Roedel: "ARM-SMMU fixes: - Fix broken detection of the S2FWB feature - Ensure page-size bitmap is initialised for SVA domains - Fix handling of SMMU client devices with duplicate Stream IDs - Don't fail SMMU probe if Stream IDs are aliased across clients Intel VT-d fixes: - Add quirk for IGFX device - Revert an ATS change to fix a boot failure AMD IOMMU: - Fix potential buffer overflow Core: - Fix for iommu_copy_struct_from_user()" * tag 'iommu-fixes-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57) iommu/vt-d: Revert ATS timing change to fix boot failure iommu: Fix two issues in iommu_copy_struct_from_user() iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid iommu/arm-smmu-v3: Fail aliasing StreamIDs more gracefully iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids iommu/arm-smmu-v3: Fix pgsize_bit for sva domains iommu/arm-smmu-v3: Add missing S2FWB feature detection
2025-05-02ublk: store request pointer in ublk_ioCaleb Sander Mateos
A ublk_io is converted to a request in several places in the I/O path by using blk_mq_tag_to_rq() to look up the (qid, tag) on the ublk device's tagset. This involves a bunch of dereferences and a tag bounds check. To make this conversion cheaper, store the request pointer in ublk_io. Overlap this storage with the io_uring_cmd pointer. This is safe because the io_uring_cmd pointer is only valid if UBLK_IO_FLAG_ACTIVE is set on the ublk_io, the request pointer is valid if UBLK_IO_FLAG_OWNED_BY_SRV, and these flags are mutually exclusive. Suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250430225234.2676781-10-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-02ublk: check UBLK_IO_FLAG_OWNED_BY_SRV in ublk_abort_queue()Caleb Sander Mateos
ublk_abort_queue() currently checks whether the UBLK_IO_FLAG_ACTIVE flag is cleared to tell whether to abort each ublk_io in the queue. But it's possible for a ublk_io to not be ACTIVE but also not have a request in flight, such as when no fetch request has yet been submitted for a tag or when a fetch request is cancelled. So ublk_abort_queue() must additionally check for an inflight request. Simplify this code by checking for UBLK_IO_FLAG_OWNED_BY_SRV instead, which indicates precisely whether a request is currently inflight. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250430225234.2676781-9-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-23 11:03:52 +0000