| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- dm thinp fix for crash that will occur when metadata device failure
races with discard passdown to the underlying data device.
- dm raid fix to not access the superblock's >= 1.9.0 'sectors' member
unconditionally.
* tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: do not queue freed thin mapping for next stage processing
dm raid: fix oops on upgrading to extended superblock format
|
|
Pull block fixes from Jens Axboe:
"Two fixes that should go into this release.
One is an nvme regression fix from Keith, fixing a missing queue
freeze if the controller is being reset. This causes the reset to
hang.
The other is a fix for a leak of the bio protection info, if smaller
sized O_DIRECT is used. This fix should be more involved as we have
other problematic paths in the kernel, but given as this isn't a
regression in this series, we'll tackle those for 4.13"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: provide bio_uninit() free freeing integrity/task associations
nvme/pci: Fix stuck nvme reset
|
|
The menu driver does not allow state0 to be disabled completely.
If it is disabled but other enabled states don't meet latency
requirements, it is still used.
Fix this by starting with the first enabled idle state. Fall back
to state 0 if no idle states are enabled (arguably this should be
-EINVAL if it is attempted, but this is the minimal fix).
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove #define PREFIX and add #define pr_fmt to use more common logging.
Miscellanea:
o Add missing newline to format
o Convert a single printk without KERN_<LEVEL> to pr_info
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This state is already visible by userspace since the BLK region will not
be enabled, and it is otherwise benign as it usually indicates that the
DIMM is not configured.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The UEFI 2.7 specification defines an updated BTT metadata format,
bumping the revision to 2.0. Add support for the new format, while
retaining compatibility for the old 1.1 format.
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Linda Knippers <linda.knippers@hpe.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
File size before:
text data bss dec hex filename
20792 1580 994 23366 5b46 drivers/acpi/nfit/core.o
File size After adding 'const':
text data bss dec hex filename
20968 1388 994 23350 5b36 drivers/acpi/nfit/core.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When filter insertion fails with no rollback, we were trying to convert
EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either
vlan->uc or vlan->mc). This would WARN_ON_ONCE and then record a bogus
filter ID of 0x1fff, neither of which is a good thing.
Fixes: 0ccb998bf46d ("sfc: fix filter_id misinterpretation in edge case")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the number of TX queues that are allocated doesn't depend
on the number of TCs, the module always loads with max num of UP
per channel.
In order to prevent the allocation of unnecessary memory, the
module will load with minimum number of UPs per channel, and the
user will be able to control the number of TX queues per channel
by changing the number of TC to 8 using the tc command.
The variable num_up will hold the information about the current
number of UPs.
Due to the change, needed to remove the lines that set the value of
UP to be different than zero in the func "mlx4_en_select_queue",
since now the num of TX queues that are allocated is only one per channel
in default.
In order not to force the UP to be zero in case of only one TC, added
a condition before forcing it in the func "mlx4_en_fill_qp_context".
Tested:
After the module is loaded with minimum number of UP per channel, to
increase num of TCs to 8, use:
tc qdisc add dev ens8 root mqprio num_tc 8
In order to decrease the number of TCs to minimum number of UP per channel,
use:
tc qdisc del dev ens8 root
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Until this patch, the number of UPs was hard coded for eight.
Replace this with a variable in struct "mlx4_en_port_profile".
Currently, the variable will hold the maximum number of UP,
as before.
The patch creates an infrastructure to add an option for dynamic
change of the actual number of TCs.
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
19057 392 0 19449 4bf9 drivers/net/ethernet/freescale/gianfar.o
File size After adding 'const':
text data bss dec hex filename
19249 192 0 19441 4bf1 drivers/net/ethernet/freescale/gianfar.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
18709 401 0 19110 4aa6 drivers/net/ethernet/smsc/smc91x.o
File size After adding 'const':
text data bss dec hex filename
18901 201 0 19102 4a9e drivers/net/ethernet/smsc/smc91x.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
15426 1256 0 16682 412a drivers/net/ethernet/ibm/ibmveth.o
File size After adding 'const':
text data bss dec hex filename
15618 1064 0 16682 412a drivers/net/ethernet/ibm/ibmveth.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver currently creates RX/TX queues during device probe, but
assigns IRQ's to them during device open. On reset, however,
IRQ's are assigned when resetting the queues. If there is a reset
while the device is closed and the device is later opened, the driver will
request IRQ's twice, causing the open to fail. This patch assigns
the IRQ's in the ibmvnic_init function after the queues are reset or
initialized, ensuring IRQ's are only requested once.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial fix to spelling mistake in netdev_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We add support for the PCIFB2 card from EAE.
Beside other cards, this card has the backplane mode enabled by default.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We read the backplane mode of each subcard from bits 2 and 3 of the misc
register.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We add the sysfs interface the read back the backplane
status of the interface.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to track the status of our queued packages. This way the driving
process knows if failed packages need to be retransmitted. For this
purpose we queue the transferred/failed packages back into the err_skb
message queue added with some status information.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We add the pdev data to the pci devices netdev structure. This way
the interface get consistent device names in the userspace (udev).
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dev_id was miscalculated. Only the two bits 4-5 are relevant for the
MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The assignment is superfluous.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch prevents the arcnet driver from the following deadlock.
[ 41.273910] ======================================================
[ 41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[ 41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted
[ 41.292366] ------------------------------------------------------
[ 41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire:
[ 41.305628] (&(&lp->lock)->rlock){+.+...}, at: [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[ 41.315199]
[ 41.315199] and this task is already holding:
[ 41.321324] (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8
[ 41.329593] which would create a new lock dependency:
[ 41.334893] (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...}
[ 41.341801]
[ 41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock:
[ 41.350108] (_xmit_ARCNET#2){+.-...}
... which became SOFTIRQ-irq-safe at:
[ 41.357539] [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.362677] [<c063ab8c>] dev_watchdog+0x5c/0x264
[ 41.367723] [<c0094edc>] call_timer_fn+0x6c/0xf4
[ 41.372759] [<c00950b8>] run_timer_softirq+0x154/0x210
[ 41.378340] [<c0036b30>] __do_softirq+0x144/0x298
[ 41.383469] [<c0036fb4>] irq_exit+0xcc/0x130
[ 41.388138] [<c0085c50>] __handle_domain_irq+0x60/0xb4
[ 41.393728] [<c0014578>] __irq_svc+0x58/0x78
[ 41.398402] [<c0010274>] arch_cpu_idle+0x24/0x3c
[ 41.403443] [<c007127c>] cpu_startup_entry+0x1f8/0x25c
[ 41.409029] [<c09adc90>] start_kernel+0x3c0/0x3cc
[ 41.414170]
[ 41.414170] to a SOFTIRQ-irq-unsafe lock:
[ 41.419931] (&(&lp->lock)->rlock){+.+...}
... which became SOFTIRQ-irq-unsafe at:
[ 41.427996] ... [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.433409] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.439646] [<c0089120>] handle_nested_irq+0x8c/0xec
[ 41.445063] [<c03c1170>] regmap_irq_thread+0x190/0x314
[ 41.450661] [<c0087244>] irq_thread_fn+0x1c/0x34
[ 41.455700] [<c0087548>] irq_thread+0x13c/0x1dc
[ 41.460649] [<c0050f10>] kthread+0xe4/0xf8
[ 41.465158] [<c000f810>] ret_from_fork+0x14/0x24
[ 41.470207]
[ 41.470207] other info that might help us debug this:
[ 41.470207]
[ 41.478627] Possible interrupt unsafe locking scenario:
[ 41.478627]
[ 41.485763] CPU0 CPU1
[ 41.490521] ---- ----
[ 41.495279] lock(&(&lp->lock)->rlock);
[ 41.499414] local_irq_disable();
[ 41.505636] lock(_xmit_ARCNET#2);
[ 41.511967] lock(&(&lp->lock)->rlock);
[ 41.518741] <Interrupt>
[ 41.521490] lock(_xmit_ARCNET#2);
[ 41.525356]
[ 41.525356] *** DEADLOCK ***
[ 41.525356]
[ 41.531587] 1 lock held by arcecho/233:
[ 41.535617] #0: (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8
[ 41.544355]
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
[ 41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 {
[ 41.557357] HARDIRQ-ON-W at:
[ 41.560664] [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.567445] [<c063ba28>] dev_deactivate_many+0x114/0x304
[ 41.574866] [<c063bc3c>] dev_deactivate+0x24/0x38
[ 41.581646] [<c0630374>] linkwatch_do_dev+0x40/0x74
[ 41.588613] [<c06305d8>] __linkwatch_run_queue+0xec/0x140
[ 41.596120] [<c0630658>] linkwatch_event+0x2c/0x34
[ 41.602991] [<c004af30>] process_one_work+0x188/0x40c
[ 41.610131] [<c004b200>] worker_thread+0x4c/0x480
[ 41.616912] [<c0050f10>] kthread+0xe4/0xf8
[ 41.623048] [<c000f810>] ret_from_fork+0x14/0x24
[ 41.629735] IN-SOFTIRQ-W at:
[ 41.633039] [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.639820] [<c063ab8c>] dev_watchdog+0x5c/0x264
[ 41.646508] [<c0094edc>] call_timer_fn+0x6c/0xf4
[ 41.653190] [<c00950b8>] run_timer_softirq+0x154/0x210
[ 41.660425] [<c0036b30>] __do_softirq+0x144/0x298
[ 41.667201] [<c0036fb4>] irq_exit+0xcc/0x130
[ 41.673518] [<c0085c50>] __handle_domain_irq+0x60/0xb4
[ 41.680754] [<c0014578>] __irq_svc+0x58/0x78
[ 41.687077] [<c0010274>] arch_cpu_idle+0x24/0x3c
[ 41.693769] [<c007127c>] cpu_startup_entry+0x1f8/0x25c
[ 41.701006] [<c09adc90>] start_kernel+0x3c0/0x3cc
[ 41.707791] INITIAL USE at:
[ 41.711003] [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.717696] [<c063ba28>] dev_deactivate_many+0x114/0x304
[ 41.725026] [<c063bc3c>] dev_deactivate+0x24/0x38
[ 41.731718] [<c0630374>] linkwatch_do_dev+0x40/0x74
[ 41.738593] [<c06305d8>] __linkwatch_run_queue+0xec/0x140
[ 41.746011] [<c0630658>] linkwatch_event+0x2c/0x34
[ 41.752789] [<c004af30>] process_one_work+0x188/0x40c
[ 41.759847] [<c004b200>] worker_thread+0x4c/0x480
[ 41.766541] [<c0050f10>] kthread+0xe4/0xf8
[ 41.772596] [<c000f810>] ret_from_fork+0x14/0x24
[ 41.779198] }
[ 41.780945] ... key at: [<c124d620>] netdev_xmit_lock_key+0x38/0x1c8
[ 41.788192] ... acquired at:
[ 41.791309] [<c007bed8>] lock_acquire+0x70/0x90
[ 41.796361] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[ 41.802324] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[ 41.808844] [<c06b9380>] packet_direct_xmit+0x130/0x1c8
[ 41.814622] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680
[ 41.820034] [<c05fe8b0>] sock_sendmsg+0x14/0x24
[ 41.825091] [<c05ffd68>] SyS_sendto+0xb8/0xe0
[ 41.829956] [<c05ffda8>] SyS_send+0x18/0x20
[ 41.834638] [<c000f780>] ret_fast_syscall+0x0/0x1c
[ 41.839954]
[ 41.841514]
the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[ 41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 {
[ 41.855644] HARDIRQ-ON-W at:
[ 41.858945] [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.865726] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.873607] [<c0089120>] handle_nested_irq+0x8c/0xec
[ 41.880666] [<c03c1170>] regmap_irq_thread+0x190/0x314
[ 41.887901] [<c0087244>] irq_thread_fn+0x1c/0x34
[ 41.894593] [<c0087548>] irq_thread+0x13c/0x1dc
[ 41.901195] [<c0050f10>] kthread+0xe4/0xf8
[ 41.907338] [<c000f810>] ret_from_fork+0x14/0x24
[ 41.914025] SOFTIRQ-ON-W at:
[ 41.917328] [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.924106] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.931981] [<c0089120>] handle_nested_irq+0x8c/0xec
[ 41.939028] [<c03c1170>] regmap_irq_thread+0x190/0x314
[ 41.946264] [<c0087244>] irq_thread_fn+0x1c/0x34
[ 41.952954] [<c0087548>] irq_thread+0x13c/0x1dc
[ 41.959548] [<c0050f10>] kthread+0xe4/0xf8
[ 41.965689] [<c000f810>] ret_from_fork+0x14/0x24
[ 41.972379] INITIAL USE at:
[ 41.975595] [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.982283] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.990063] [<c0089120>] handle_nested_irq+0x8c/0xec
[ 41.997027] [<c03c1170>] regmap_irq_thread+0x190/0x314
[ 42.004172] [<c0087244>] irq_thread_fn+0x1c/0x34
[ 42.010766] [<c0087548>] irq_thread+0x13c/0x1dc
[ 42.017267] [<c0050f10>] kthread+0xe4/0xf8
[ 42.023314] [<c000f810>] ret_from_fork+0x14/0x24
[ 42.029903] }
[ 42.031648] ... key at: [<bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet]
[ 42.039255] ... acquired at:
[ 42.042372] [<c007bed8>] lock_acquire+0x70/0x90
[ 42.047413] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[ 42.053364] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[ 42.059872] [<c06b9380>] packet_direct_xmit+0x130/0x1c8
[ 42.065634] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680
[ 42.071030] [<c05fe8b0>] sock_sendmsg+0x14/0x24
[ 42.076069] [<c05ffd68>] SyS_sendto+0xb8/0xe0
[ 42.080926] [<c05ffda8>] SyS_send+0x18/0x20
[ 42.085601] [<c000f780>] ret_fast_syscall+0x0/0x1c
[ 42.090918]
[ 42.092481]
[ 42.092481] stack backtrace:
[ 42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536
[ 42.104751] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 42.111183] [<c0017ec8>] (unwind_backtrace) from [<c00139d0>] (show_stack+0x10/0x14)
[ 42.119337] [<c00139d0>] (show_stack) from [<c02a82c4>] (dump_stack+0x8c/0x9c)
[ 42.126937] [<c02a82c4>] (dump_stack) from [<c0078260>] (check_usage+0x4bc/0x63c)
[ 42.134815] [<c0078260>] (check_usage) from [<c0078438>] (check_irq_usage+0x58/0xb0)
[ 42.142964] [<c0078438>] (check_irq_usage) from [<c007aaa0>] (__lock_acquire+0x1524/0x20b0)
[ 42.151740] [<c007aaa0>] (__lock_acquire) from [<c007bed8>] (lock_acquire+0x70/0x90)
[ 42.159886] [<c007bed8>] (lock_acquire) from [<c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54)
[ 42.168768] [<c06f9140>] (_raw_spin_lock_irqsave) from [<bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet])
[ 42.179115] [<bf083bc8>] (arcnet_send_packet [arcnet]) from [<c06b9380>] (packet_direct_xmit+0x130/0x1c8)
[ 42.189182] [<c06b9380>] (packet_direct_xmit) from [<c06bc7e4>] (packet_sendmsg+0x3b8/0x680)
[ 42.198059] [<c06bc7e4>] (packet_sendmsg) from [<c05fe8b0>] (sock_sendmsg+0x14/0x24)
[ 42.206199] [<c05fe8b0>] (sock_sendmsg) from [<c05ffd68>] (SyS_sendto+0xb8/0xe0)
[ 42.213978] [<c05ffd68>] (SyS_sendto) from [<c05ffda8>] (SyS_send+0x18/0x20)
[ 42.221388] [<c05ffda8>] (SyS_send) from [<c000f780>] (ret_fast_syscall+0x0/0x1c)
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
v1 -> v2: removed unneeded zero assignment of flags
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to change some general performance settings and to provide
some performance settings based on the device that is probed.
This includes:
- Setting the maximum read/write outstanding request limit
- Reducing the AXI interface burst length size
- Selectively setting the Tx and Rx descriptor pre-fetch threshold
- Selectively setting additional cache coherency controls
Tested and verified on all versions of the hardware.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the driver hardcodes the PBLx8 setting. Remove the need for
specifying the PBLx8 setting and automatically calculate based on the
specified PBL value. Since the PBLx8 setting applies to both Tx and Rx
use the same PBL value for both of them.
Also, the driver currently uses a bit field to set the AXI master burst
len setting. Change to the full bit field range and set the burst length
based on the specified value.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In prep for setting fine grained read and write DMA cache coherency
controls, allow specific values to be used to set the cache coherency
registers.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For IRQ affinity, set the affinity hints for the IRQs to be (initially) on
the processors corresponding to the NUMA node of the device.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to perform memory allocations on the node of the device. The
original allocation or the ring structure and Tx/Rx queues allocated all
of the memory at once and then carved it up for each channel and queue.
To best ensure that we get as much memory from the NUMA node as we can,
break the channel and ring allocations into individual allocations.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of the device interrupts should function as level interrupts. For
some hardware configurations this requires setting some control bits
so that if the interrupt status has not been cleared the interrupt
should be reissued.
Additionally, when using MSI or MSI-X interrupts, run the interrupt
service routine as a tasklet so that the re-issuance of the interrupt
is handled properly.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When I2C communication fails, it tends to always fail. Rather than
continuously issue an error message (once per second in most cases),
change the message to be issued just once.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver has some missing functionality when operating in the mode that
supports 2.5GbE. Fix the driver to fully recognize and support this speed.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the function that performs a software reset of the hardware
provides a return code. During driver probe check this return code and
exit with an error if the software reset fails.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just to be on the safe side, should the update of the timestamp registers
not complete, issue a warning rather than looping forever waiting for the
update to complete.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Spurious Tx timestamp interrupts can cause an oops in the Tx timestamp
processing function if a Tx timestamp skb is NULL. Add a check to insure
a Tx timestamp skb is present before attempting to use it.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During PTP initialization, the Timestamp Control register should be
cleared and not the Tx Configuration register. While this typo causes
the wrong register to be cleared, the default value of each register and
and the fact that the Tx Configuration register is programmed afterwards
doesn't result in a bug, hence only fixing in net-next.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using SFPs, the supported and advertised settings should be initially
based on the SFP that has been detected. The code currently indicates the
overall support of the device as opposed to what the SFP is capable of.
Update the code to change the supported link modes, auto-negotiation, etc.
to be based on the installed SFP.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify and centralize the mailbox command rate change interface by
having a single function perform the writes to the mailbox registers
to issue the request.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
My static checker complains that ofdpa_neigh_del() can sometimes free
"found". It just makes sense to use it first before deleting it.
Fixes: ecf244f753e0 ("rocker: fix maybe-uninitialized warning")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bump the maximum API supported by these device families to 33.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The newest devices need a longer time to reset because of
their more complex hardware. Wait 5ms after device reset.
Consolidate all the places that reset the device in the
PCIe transport to avoid future bugs.
While at it, unify the flow to use set_bit instead of full
write as requested by the hardware designers.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
iwl_pcie_apm_init can fail so make sure that the caller
takes the status into account.
Also, ensure that the error that iwl_pcie_apm_init can emit
will appear in the kernel log by default.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When a station that's not associated sends a data frame (e.g. an NDP)
hostapd will respond with a disassoc frame, telling it that it's not
associated. The station might also not be authenticated, in which case
there will not be a station entry for it, and as a result we need to
accept such frames without a station.
Fixes: 3ee0f0e23e4f ("iwlwifi: mvm: fix DQA AP mode station assumption")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The API has changed - update the code.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When we get a non-STA frame to transmit in client mode, we try to use
the IWL_MVM_DQA_BSS_CLIENT_QUEUE queue (queue #4). However, at this
point, the queue might not be allocated at all, causing warnings. The
scenario on which this happened was a race condition between mac80211
and our queue allocation work:
* mac80211 sends auth
* we stop mac80211 queues to allocate a hw queue
* authentication is aborted
* we allocate HW queue and start mac80211 queues
* mac80211 removes station
* mac80211 hands us the auth frame from the pending queue
At this point, since mac80211 has already removed the station, we try
to transmit the frame through this special non-station case on queue
4 anyway.
In order to really use it properly, we'd have to again go through the
hw queue allocation work, and attach it to a station, etc. In this
case that isn't possible (there's no station anymore), but if this
special case were needed, then we'd have to do it this way.
However, the special case is documented to exist for TDLS, but can't
trigger there because the TDLS setup frames etc. are normal to-DS
frames going to the peer through the AP. Testing also confirms that
this code path isn't triggered in TDLS.
Therefore, remove the code path to avoid using an unused queue. The
erroneous frame described above will still be transmitted on the AUX
queue, but arguably that's a mac80211 problem, which will eventually
be fixed by moving everything there to TXQs.
Fixes: e3118ad74d7e ("iwlwifi: mvm: support tdls in dqa mode")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When we get large sends on non-QoS association, we had a
bug that mangled the SNAP header. Fix that.
Fixes: a6d5e32f247c ("iwlwifi: mvm: send large SKBs to the transport")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When going into suspend, the HW configuration for MSI-X will
likely be lost. As a consequence, after waking up, all IRQ
causes will be mapped to interrupt 0, and as a consequence we
don't notice the interrupt because in most cases this is an
interrupt for a queue, and getting it doesn't read the other
cause registers.
Fixes: 2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Getting the TID of a packet before we know it is a QoS data
packet isn't a good idea. Delay the TID retrieval until
we know the packet is a QoS data packet.
Fixes: bb81bb68f472 ("iwlwifi: mvm: add Tx A-MSDU inside A-MPDU")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When in non-DQA mode, mac80211 actually gets a pretty much perfect
idea (in vif->hw_queue/cab_queue) of which queues we're using. But
in DQA mode, this isn't true - nonetheless, we were adding all the
queues, even the ones stations are using, to the queue allocation
bitmap.
Fix this, we should only add the queues we really are using in DQA
mode:
* IWL_MVM_OFFCHANNEL_QUEUE, as we use this in both modes
* mvm->aux_queue, as we use this in both modes - mac80211
never really knows about it but we use it as a cookie
internally, so can't reuse it
* possibly the GCAST queue (cab_queue)
* all the "queues" we told mac80211 about we were using on each
interface (vif->hw_queue), these are entirely virtual in this
mode
Also add back the failure now when we can't allocate any more of
these - now virtual - queues; this was skipped in DQA mode and
would lead to having multiple ACs or even interfaces use the same
queue number in mac80211 (10, since that's the limit), which would
stop far too many queues if stopped.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
There may be a difference between the mac80211 vif->cab_queue and
mvmvif->cab_queue, particularly with TVQM. Make the code map this
earlier, instead of first returning the mac80211 one again from
iwl_mvm_get_ctrl_vif_queue().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
