| Age | Commit message (Collapse) | Author |
|---|
|
pinctrl-amd currently tries to program bit 19 of all GPIOs to select
either a 4kΩ or 8hΩ pull up, but this isn't what bit 19 does. Bit
19 is marked as reserved, even in the latest platforms documentation.
Drop this programming functionality.
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-4-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to
GPIO 7 is causing an interrupt storm. This issue doesn't happen on
Windows.
Comparing the GPIO register configuration between Windows and Linux
bit 20 has been configured as a pull up on Windows, but not on Linux.
Checking GPIO declaration from the firmware it is clear it *should* have
been a pull up on Linux as well.
```
GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0007
}
```
On Linux amd_gpio_set_config() is currently only used for programming
the debounce. Actually the GPIO core calls it with all the arguments
that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`.
To solve this issue expand amd_gpio_set_config() to support the other
arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`,
`PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`.
Reported-by: Nik P <npliashechnikov@gmail.com>
Reported-by: Nathan Schulte <nmschulte@gmail.com>
Reported-by: Friedrich Vock <friedrich.vock@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Reported-by: dridri85@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217493
Link: https://lore.kernel.org/linux-input/20230530154058.17594-1-friedrich.vock@gmx.de/
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230705133005.577-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
It's uncommon to use debounce on any other pin, but technically
we should only set debounce to 0 when working off GPIO0.
Cc: stable@vger.kernel.org
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Fixes: 968ab9261627 ("pinctrl: amd: Detect internal GPIO0 debounce handling")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
1ba6113a90a0 removed a lot of the kernel GPU channel, but method 0x128
was important as otherwise the GPU spams us with `CACHE_ERROR` messages.
We use the blit subchannel inside our vblank handling, so we should keep
at least this part.
v2: Only do it for NV11+ GPUs
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/201
Fixes: 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526091052.2169044-1-kherbst@redhat.com
|
|
This fixes a NULL pointer access inside nvkm_acr_oneinit in case necessary
firmware files couldn't be loaded.
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/212
Fixes: 4b569ded09fd ("drm/nouveau/acr/ga102: initial support")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230522201838.1496622-1-kherbst@redhat.com
|
|
The simple_write_to_buffer() function is designed to handle partial
writes. It returns negatives on error, otherwise it returns the number
of bytes that were able to be copied. This code doesn't check the
return properly. We only know that the first byte is written, the rest
of the buffer might be uninitialized.
There is no need to use the simple_write_to_buffer() function.
Partial writes are prohibited by the "if (*ppos != 0)" check at the
start of the function. Just use memdup_user() and copy the whole
buffer.
Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/7c1f950b-3a7d-4252-82a6-876e53078ef7@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Misc small fixes and hw-id additions"
* tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet
platform/x86: dell-ddv: Fix mangled list in documentation
platform/x86: dell-ddv: Improve error handling
platform/x86/amd: pmf: Add new ACPI ID AMDI0103
platform/x86/amd: pmc: Add new ACPI ID AMDI000A
platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx
platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc
platform/x86: int3472/discrete: set variable skl_int3472_regulator_second_sensor storage-class-specifier to static
platform/x86/intel/tpmi: Prevent overflow for cap_offset
platform/x86: wmi: Replace open coded guid_parse_and_compare()
platform/x86: wmi: Break possible infinite loop when parsing GUID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- AMD SFH shift-out-of-bounds fix (Basavaraj Natikar)
- avoid struct memcpy overrun warning in the hid-hyperv module (Arnd
Bergmann)
- a quick HID kselftests script fix for our CI to be happy (Benjamin
Tissoires)
- various fixes and additions of device IDs
* tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: amd_sfh: Fix for shift-out-of-bounds
HID: amd_sfh: Rename the float32 variable
HID: input: fix mapping for camera access keys
HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed
HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports
HID: hyperv: avoid struct memcpy overrun warning
selftests: hid: fix vmtests.sh not running make headers
|
|
Because smatch warnings:
drivers/gpu/drm/loongson/lsdc_plane.c:199
lsdc_cursor_plane_atomic_async_check()
warn: variable dereferenced before check 'state' (see line 180)
vim +/state +199 drivers/gpu/drm/loongson/lsdc_plane.c
174 static int
lsdc_cursor_plane_atomic_async_check(struct drm_plane *plane,
175 struct drm_atomic_state *state)
176 {
177 struct drm_plane_state *new_state;
178 struct drm_crtc_state *crtc_state;
179
180 new_state = drm_atomic_get_new_plane_state(state, plane);
^^^^^
state is dereferenced inside this function
181
182 if (!plane->state || !plane->state->fb) {
183 drm_dbg(plane->dev, "%s: state is NULL\n", plane->name);
184 return -EINVAL;
185 }
186
187 if (new_state->crtc_w != new_state->crtc_h) {
188 drm_dbg(plane->dev, "unsupported cursor size: %ux%u\n",
189 new_state->crtc_w, new_state->crtc_h);
190 return -EINVAL;
191 }
192
193 if (new_state->crtc_w != 64 && new_state->crtc_w != 32) {
194 drm_dbg(plane->dev, "unsupported cursor size: %ux%u\n",
195 new_state->crtc_w, new_state->crtc_h);
196 return -EINVAL;
197 }
198
199 if (state) {
^^^^^
Checked too late!
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202307100423.rV7D05Uq-lkp@intel.com/
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710102411.257970-1-suijingfeng@loongson.cn
|
|
If any error handling that disables the controller fails to queue the
reset work, like if the state changed to disconnected inbetween, then
the failed teardown needs to unquiesce the queues since it's no longer
paired with reset_work. Just make sure that the controller can be put
into a resetting state prior to starting the disable so that no other
handling can change the queue states while recovery is happening.
Reported-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
There is a small race window between nvme-fc association creation and error
recovery. Fix this race condition by protecting accessing to controller
state and ASSOC_FAILED flag under nvme-fc controller lock.
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Return non-zero status code(-EIO) when needed, so re-connecting or
deleting controller will be triggered properly.
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
SMU13 overrides dynamic PCIe lane width and dynamic speed by when on
certain hosts. commit 38e4ced80479 ("drm/amd/pm: conditionally disable
pcie lane switching for some sienna_cichlid SKUs") worked around this
issue by setting up certain SKUs to set up certain limits, but the same
fundamental problem with those hosts affects all SMU11 implmentations
as well, so align the SMU11 and SMU13 driver handling.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Intel platforms such as Sapphire Rapids and Raptor Lake don't support
dynamic pcie lane or speed switching.
This limitation seems to carry over from one generation to another.
To be safer, disable dynamic pcie lane width and speed switching when
running on an Intel platform.
Link: https://edc.intel.com/content/www/us/en/design/products/platforms/details/raptor-lake-s/13th-generation-core-processors-datasheet-volume-1-of-2/005/pci-express-support/
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2663
Co-developed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
So that SMU13.0.0 and SMU13.0.7 do not need to have one copy each.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
In restore process worker, pinned BO cause update PTE fail, then
the function re-schedule the restore_work. This will generate dead loop.
Signed-off-by: gaba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
the smu driver_table is used for all types of smu
tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..).
it is necessary to hold this lock to avoiding data tampering
during the i2c read operation.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Make IS_ERR() judge the debugfs_create_dir() function return.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Report the legacy fallback behavior for uuid attributes just once
instead of logging repeated warnings for the same condition every time
the attribute is read. The old behavior is too spamy on the kernel logs.
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Fixes: f530bc60a30b ("drm/nouveau/disp: move HDMI config into acquire + infoframe methods")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630160645.3984596-1-kherbst@redhat.com
Signed-off-by: Karol Herbst <kherbst@redhat.com>
|
|
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Fixes: f530bc60a30b ("drm/nouveau/disp: move HDMI config into acquire + infoframe methods")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628212248.3798605-1-kherbst@redhat.com
Signed-off-by: Karol Herbst <kherbst@redhat.com>
|
|
Since commit 096b52fd2bb4 ("perf: RISC-V: throttle perf events") the
perf_sample_event_took() function was added to report time spent in
overflow interrupts. If the interrupt takes too long, the perf framework
will lower the sysctl_perf_event_sample_rate and max_samples_per_tick.
When hwc->interrupts is larger than max_samples_per_tick, the
hwc->interrupts will be set to MAX_INTERRUPTS, and events will be
throttled within the __perf_event_account_interrupt() function.
However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update the
PERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler()
function to avoid throttling. When the perf framework unthrottled the event
in the timer interrupt handler, it triggers riscv_pmu_start() function
and causes a WARN_ON_ONCE() warning, as shown below:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e
Modules linked in:
CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1
Hardware name: SiFive (DT)
epc : riscv_pmu_start+0x7c/0x8e
ra : riscv_pmu_start+0x28/0x8e
epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0
gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0
t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720
s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000
a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000
a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030
s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00
s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000
s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340
s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796
t5 : 0000000700000000 t6 : ffffaf8005269870
status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[<ffffffff80aef864>] riscv_pmu_start+0x7c/0x8e
[<ffffffff80185b56>] perf_adjust_freq_unthr_context+0x15e/0x174
[<ffffffff80188642>] perf_event_task_tick+0x88/0x9c
[<ffffffff800626a8>] scheduler_tick+0xfe/0x27c
[<ffffffff800b5640>] update_process_times+0x9a/0xba
[<ffffffff800c5bd4>] tick_sched_handle+0x32/0x66
[<ffffffff800c5e0c>] tick_sched_timer+0x64/0xb0
[<ffffffff800b5e50>] __hrtimer_run_queues+0x156/0x2f4
[<ffffffff800b6bdc>] hrtimer_interrupt+0xe2/0x1fe
[<ffffffff80acc9e8>] riscv_timer_interrupt+0x38/0x42
[<ffffffff80090a16>] handle_percpu_devid_irq+0x90/0x1d2
[<ffffffff8008a9f4>] generic_handle_domain_irq+0x28/0x36
After referring other PMU drivers like Arm, Loongarch, Csky, and Mips,
they don't call *_pmu_stop() to update with PERF_HES_STOPPED flag
after perf_event_overflow() function nor do they add PERF_HES_STOPPED
flag checking in *_pmu_start() which don't cause this warning.
Thus, it's recommended to remove this unnecessary check in
riscv_pmu_start() function to prevent this warning.
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Link: https://lore.kernel.org/r/20230710154328.19574-1-eric.lin@sifive.com
Fixes: 096b52fd2bb4 ("perf: RISC-V: throttle perf events")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Use the new component here as well and remove the old handling.
v2: drop dupplicate handling
v3: fix memory leak pointed out by Tatsuyuki
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-7-christian.koenig@amd.com
|
|
Start using the new component here as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-6-christian.koenig@amd.com
|
|
Start using the new component here as well.
v2: ignore duplicates to allow per VM BO mappings
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-5-christian.koenig@amd.com
|
|
Avoids quite a bit of logic and kmalloc overhead.
v2: fix multiple problems pointed out by Felix
v3: two more nit picks from Felix fixed
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-4-christian.koenig@amd.com
|
|
Exercise at least all driver facing functions of this new component.
v2: add array test as well
v3: some kunit cleanups
v4: more tests and cleanups
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-3-christian.koenig@amd.com
|
|
This adds the infrastructure for an execution context for GEM buffers
which is similar to the existing TTMs execbuf util and intended to replace
it in the long term.
The basic functionality is that we abstracts the necessary loop to lock
many different GEM buffers with automated deadlock and duplicate handling.
v2: drop xarray and use dynamic resized array instead, the locking
overhead is unnecessary and measurable.
v3: drop duplicate tracking, radeon is really the only one needing that.
v4: fixes issues pointed out by Danilo, some typos in comments and a
helper for lock arrays of GEM objects.
v5: some suggestions by Boris Brezillon, especially just use one retry
macro, drop loop in prepare_array, use flags instead of bool
v6: minor changes suggested by Thomas, Boris and Danilo
v7: minor typos pointed out by checkpatch.pl fixed
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Tested-by: Danilo Krummrich <dakr@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-2-christian.koenig@amd.com
|
|
When SPI loopback transfer is performed, S3C64XX_SPI_MODE_SELF_LOOPBACK
bit still remained. It works as loopback even if the next transfer is
not spi loopback mode.
If not SPI_LOOP, needs to clear S3C64XX_SPI_MODE_SELF_LOOPBACK bit.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Fixes: ffb7bcd3b27e ("spi: s3c64xx: support loopback mode")
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20230711082020.138165-1-jaewon02.kim@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When allocating the 2D array for handling IRQ type registers in
regmap_add_irq_chip_fwnode(), the intent is to allocate a matrix
with num_config_bases rows and num_config_regs columns.
This is currently handled by allocating a buffer to hold a pointer for
each row (i.e. num_config_bases). After that, the logic attempts to
allocate the memory required to hold the register configuration for
each row. However, instead of doing this allocation for each row
(i.e. num_config_bases allocations), the logic erroneously does this
allocation num_config_regs number of times.
This scenario can lead to out-of-bounds accesses when num_config_regs
is greater than num_config_bases. Fix this by updating the terminating
condition of the loop that allocates the memory for holding the register
configuration to allocate memory only for each row in the matrix.
Amit Pundir reported a crash that was occurring on his db845c device
due to memory corruption (see "Closes" tag for Amit's report). The KASAN
report below helped narrow it down to this issue:
[ 14.033877][ T1] ==================================================================
[ 14.042507][ T1] BUG: KASAN: invalid-access in regmap_add_irq_chip_fwnode+0x594/0x1364
[ 14.050796][ T1] Write of size 8 at addr 06ffff8081021850 by task init/1
[ 14.242004][ T1] The buggy address belongs to the object at ffffff8081021850
[ 14.242004][ T1] which belongs to the cache kmalloc-8 of size 8
[ 14.255669][ T1] The buggy address is located 0 bytes inside of
[ 14.255669][ T1] 8-byte region [ffffff8081021850, ffffff8081021858)
Fixes: faa87ce9196d ("regmap-irq: Introduce config registers for irq types")
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/all/CAMi1Hd04mu6JojT3y6wyN2YeVkPR5R3qnkKJ8iR8if_YByCn4w@mail.gmail.com/
Tested-by: John Stultz <jstultz@google.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org> # tested on Dragonboard 845c
Cc: stable@vger.kernel.org # v6.0+
Cc: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: "Isaac J. Manjarres" <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20230711193059.2480971-1-isaacmanjarres@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
These callbacks can be called again by the cpufreq core after the driver
is initialized and must be kept around. We currently get section
mismatch build warnings.
Don't mark them with __init.
Fixes: dcfce7c2cee4 ("cpufreq: sparc: Don't allocate cpufreq_driver dynamically")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
igc: Fix corner cases for TSN offload
Florian Kauer says:
The igc driver supports several different offloading capabilities
relevant in the TSN context. Recent patches in this area introduced
regressions for certain corner cases that are fixed in this series.
Each of the patches (except the first one) addresses a different
regression that can be separately reproduced. Still, they have
overlapping code changes so they should not be separately applied.
Especially #4 and #6 address the same observation,
but both need to be applied to avoid TX hang occurrences in
the scenario described in the patches.
====================
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is equivalent to 'gen2', and it was always confusing to have
two identical config entries. The split config patch actually had
been originally developed after removing 'use_tfh" and didn't add
the use_tfh in the new configs as they'd later been copied to the
new files. Thus the easiest way to fix the init crash here now is
to just remove use_tfh (which is erroneously unset in most of the
configs now) and use 'gen2' in the code instead.
There's possibly still an unwind error in iwl_txq_gen2_init() as
it crashes if TXQ 0 fails to initialize, but we can deal with it
later since the original failure is due to the use_tfh confusion.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217622
Link: https://lore.kernel.org/all/9274d9bd3d080a457649ff5addcc1726f08ef5b2.camel@xry111.site/
Link: https://lore.kernel.org/all/CAAJw_Zug6VCS5ZqTWaFSr9sd85k%3DtyPm9DEE%2BmV%3DAKoECZM%2BsQ@mail.gmail.com/
Fixes: 19898ce9cf8a ("wifi: iwlwifi: split 22000.c into multiple files")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230710145038.84186-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Quieten a gcc (11.3.0) build error or warning by checking the function
call status and returning -EBUSY if the function call failed.
This is similar to what several other wireless drivers do for the
SIOCGIWRATE ioctl call when there is a locking problem.
drivers/net/wireless/cisco/airo.c: error: 'status_rid.currentXmitRate' is used uninitialized [-Werror=uninitialized]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/39abf2c7-24a-f167-91da-ed4c5435d1c4@linux-m68k.org
Link: https://lore.kernel.org/r/20230709133154.26206-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In response to a disk I/O request, Hyper-V has been observed to return SRB
status value 0x30. This indicates the request was not processed by Hyper-V
because low memory conditions on the host caused an internal error. The
0x30 status is not recognized by storvsc, so the I/O operation is not
flagged as an error. The request is treated as if it completed normally but
with zero data transferred, causing a flood of retries.
Add a definition for this SRB status value and handle it like other error
statuses from the Hyper-V host.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1688788886-94279-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in the currently staged SCSI fixes for 6.5.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Generate a hotplug event after registering a client to allow the
client to configure its display. Remove the hotplug calls from the
existing clients for fbdev emulation. This change fixes a concurrency
bug between registering a client and receiving events from the DRM
core. The bug is present in the fbdev emulation of all drivers.
The fbdev emulation currently generates a hotplug event before
registering the client to the device. For each new output, the DRM
core sends an additional hotplug event to each registered client.
If the DRM core detects first output between sending the artificial
hotplug and registering the device, the output's hotplug event gets
lost. If this is the first output, the fbdev console display remains
dark. This has been observed with amdgpu and fbdev-generic.
Fix this by adding hotplug generation directly to the client's
register helper drm_client_register(). Registering the client and
receiving events are serialized by struct drm_device.clientlist_mutex.
So an output is either configured by the initial hotplug event, or
the client has already been registered.
The bug was originally added in commit 6e3f17ee73f7 ("drm/fb-helper:
generic: Call drm_client_add() after setup is done"), in which adding
a client and receiving a hotplug event switched order. It was hidden,
as most hardware and drivers have at least on static output configured.
Other drivers didn't use the internal DRM client or still had struct
drm_mode_config_funcs.output_poll_changed set. That callback handled
hotplug events as well. After not setting the callback in amdgpu in
commit 0e3172bac3f4 ("drm/amdgpu: Don't set struct
drm_driver.output_poll_changed"), amdgpu did not show a framebuffer
console if output events got lost. The bug got copy-pasted from
fbdev-generic into the other fbdev emulation.
Reported-by: Moritz Duge <MoritzDuge@kolahilft.de>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649
Fixes: 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done")
Fixes: 8ab59da26bc0 ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Fixes: b79fe9abd58b ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers")
Fixes: 63c381552f69 ("drm/armada: Implement fbdev emulation as in-kernel client")
Fixes: 49953b70e7d3 ("drm/exynos: Implement fbdev emulation as in-kernel client")
Fixes: 8f1aaccb04b7 ("drm/gma500: Implement client-based fbdev emulation")
Fixes: 940b869c2f2f ("drm/msm: Implement fbdev emulation as in-kernel client")
Fixes: 9e69bcd88e45 ("drm/omapdrm: Implement fbdev emulation as in-kernel client")
Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation")
Fixes: 71ec16f45ef8 ("drm/tegra: Implement fbdev emulation as in-kernel client")
Fixes: 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Moritz Duge <MoritzDuge@kolahilft.de>
Tested-by: Torsten Krah <krah.tm@gmail.com>
Tested-by: Paul Schyska <pschyska@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
|
|
Include <linux/screen_info.h> to get the global screen_info state.
Fixes the following errors:
>> drivers/video/fbdev/hyperv_fb.c:1033:10: error: use of undeclared identifier 'screen_info'
1033 | base = screen_info.lfb_base;
| ^
drivers/video/fbdev/hyperv_fb.c:1034:10: error: use of undeclared identifier 'screen_info'
1034 | size = screen_info.lfb_size;
| ^
>> drivers/video/fbdev/hyperv_fb.c:1080:3: error: must use 'struct' tag to refer to type 'screen_info'
1080 | screen_info.lfb_size = 0;
| ^
| struct
>> drivers/video/fbdev/hyperv_fb.c:1080:14: error: expected identifier or '('
1080 | screen_info.lfb_size = 0;
| ^
drivers/video/fbdev/hyperv_fb.c:1081:3: error: must use 'struct' tag to refer to type 'screen_info'
1081 | screen_info.lfb_base = 0;
| ^
| struct
drivers/video/fbdev/hyperv_fb.c:1081:14: error: expected identifier or '('
1081 | screen_info.lfb_base = 0;
| ^
drivers/video/fbdev/hyperv_fb.c:1082:3: error: must use 'struct' tag to refer to type 'screen_info'
1082 | screen_info.orig_video_isVGA = 0;
| ^
| struct
drivers/video/fbdev/hyperv_fb.c:1082:14: error: expected identifier or '('
1082 | screen_info.orig_video_isVGA = 0;
| ^
8 errors generated.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307101042.rqehuauj-lkp@intel.com/
Fixes: 8b0d13545b09 ("efi: Do not include <linux/screen_info.h> from EFI header")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "K. Y. Srinivasan" <kys@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Haiyang Zhang <haiyangz@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Wei Liu <wei.liu@kernel.org> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Dexuan Cui <decui@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Helge Deller <deller@gmx.de> (maintainer:FRAMEBUFFER LAYER)
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-hyperv@vger.kernel.org (open list:Hyper-V/Azure CORE AND DRIVERS)
Cc: linux-fbdev@vger.kernel.org (open list:FRAMEBUFFER LAYER)
Cc: dri-devel@lists.freedesktop.org (open list:FRAMEBUFFER LAYER)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710075848.23087-1-tzimmermann@suse.de
|
|
Due to hardware limitation, MCAM drop rule with
ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting
such rules.
Fixes: dce677da57c0 ("octeontx2-pf: Add vlan-etype to ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20230710103027.2244139-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add info for the Archos 101 Cesium Educ tablet
It was tested using gslx680_ts_acpi module
PR at https://github.com/onitake/gsl-firmware/pull/210 for the firmware
Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Link: https://lore.kernel.org/r/20230707141425.21473-1-tomlohave@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
If for some reason a external function returns -ENODEV,
no error message is being displayed because the driver
assumes that -ENODEV can only be returned internally if
no sensors, etc where found.
Fix this by explicitly returning 0 in such a case since
missing hardware is no error. Also remove the now obsolete
check for -ENODEV.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230707010333.12954-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add new ACPI ID AMDI0103 used by upcoming AMD platform to the PMF
supported list of devices.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230711100903.384151-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add new ACPI ID AMDI000A used by upcoming AMD platform to the pmc
supported list of devices
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230711100344.383948-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
HP 15s-eq2xxx is an older Lucienne laptop that has a problem resuming
from s2idle when IOMMU is enabled. The symptoms very closely resemble
that of the Lenovo issues with NVME resume. Lucienne was released in
a similar timeframe as the Renoir / Cezanne Lenovo laptops and they
may have similar BIOS code.
Applying the same quirk to this system allows the system to work with
IOMMU enabled and s2idle resume to work.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2684
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230710183934.17315-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It turns out that some-non Lenovo systems can benefit from the quirk
introduced for Lenovo systems in commit 455cd867b85b5 ("platform/x86:
thinkpad_acpi: Add a s2idle resume quirk for a number of laptops").
So move this quirk into running from the amd-pmc driver instead.
No intended functional changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230710183934.17315-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove unnecessary of_node_put from the continue path to prevent
child node from being released twice, which could avoid resource
leak or other unexpected issues.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: de879a016a94 ("net: dsa: felix: add functionality when not all ports are supported")
Link: https://lore.kernel.org/r/20230710031859.36784-1-luhongfei@vivo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit a4d86249c773 ("drm/i915/gt: Provide a utility to create a scratch
buffer") mistakenly passed in uapi I915_CACHING_CACHED as argument to
i915_gem_object_set_cache_coherency(), which actually takes internal
enum i915_cache_level.
No functional issue since the value matches I915_CACHE_LLC (1 == 1), which
is the intended caching mode, but lets clean it up nevertheless.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: a4d86249c773 ("drm/i915/gt: Provide a utility to create a scratch buffer")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707125503.3965817-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 49c60b2f0867ac36fd54d513882a48431aeccae7)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Commit 9275277d5324 ("drm/i915: use pat_index instead of cache_level")
added a dedicated gen12_pte_encode but forgot to remove the Gen12 specific
bit from gen8_pte_encode.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 9275277d5324 ("drm/i915: use pat_index instead of cache_level")
Cc: Fei Yang <fei.yang@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707124644.3965281-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 08509377dd82ead98429785509f6b52a4b5f09f5)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
For reports that are not powers of 2, reports at the end of the OA
buffer may get split across the buffer boundary. When zeroing out such
reports, take the split into consideration.
v2: Use OA_BUFFER_SIZE (Ashutosh)
Fixes: 09a36015d9a0 ("drm/i915/perf: Clear out entire reports after reading if not power of 2 size")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616173402.699776-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 40b1588a750240cbe8a83117aa785d778749a77c)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
