| Age | Commit message (Collapse) | Author |
|---|
|
After previous commit, which unified various IPsec creation modes,
there is no need to have struct mlx5e_ipsec_rx exposed in global
IPsec header. Move it to ipsec_fs.c to be placed together with
already existing struct mlx5e_ipsec_tx.
Fixes: 1762f132d542 ("net/mlx5e: Support IPsec packet offload for RX in switchdev mode")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Change normal IPsec flow to use the same creation/destruction functions
for status flow table as that of ESW, which first of all refines the
code to have less code duplication.
And more importantly, the ESW status table handles IPsec syndrome
checks at steering by HW, which is more efficient than the previous
behaviour we had where it was copied to WQE meta data and checked
by the driver.
Fixes: 1762f132d542 ("net/mlx5e: Support IPsec packet offload for RX in switchdev mode")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
According to RFC4303, section "3.3.3. Sequence Number Generation",
the first packet sent using a given SA will contain a sequence
number of 1.
However if user didn't set seq/oseq, the HW used zero as first sequence
packet number. Such misconfiguration causes to drop of first packet
if replay window protection was enabled in SA.
To fix it, set sequence number to be at least 1.
Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Users can configure IPsec replay window size, but mlx5 driver didn't
honor their choice and set always 32bits. Fix assignment logic to
configure right size from the beginning.
Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers")
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
The status bits of register MAC_FPE_CTRL_STS are clear on read. Using
32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and
dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt
handler missing FPE event status and leads to FPE handshaking failure and
retries.
To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure()
and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to
cache the control bits of MAC_FPE_CTRL_STS and to avoid reading
MAC_FPE_CTRL_STS in those methods.
Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jianheng Zhang <Jianheng.Zhang@synopsys.com>
Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
coalescing
The current adaptive interrupt coalescing code updates only rx
packet stats for dim algorithm. This patch also updates tx packet
stats which will be useful when there is only tx traffic.
Also moved configuring hardware adaptive interrupt setting to
driver dim callback.
Fixes: 6e144b47f560 ("octeontx2-pf: Add support for adaptive interrupt coalescing")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231201053330.3903694-1-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v6.7-rc4 #2:
- d21a3962d304 ("drm/i915: Call intel_pre_plane_updates() also for pipes
getting enabled") in the previous fixes pull depends on a change that
wasn't included. Pick it up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87fs0m48ol.fsf@intel.com
|
|
Probe of Sohard Arcnet cards fails,
if 2 or more cards are installed in a system.
See kernel log:
[ 2.759203] arcnet: arcnet loaded
[ 2.763648] arcnet:com20020: COM20020 chipset support (by David Woodhouse et al.)
[ 2.770585] arcnet:com20020_pci: COM20020 PCI support
[ 2.772295] com20020 0000:02:00.0: enabling device (0000 -> 0003)
[ 2.772354] (unnamed net_device) (uninitialized): PLX-PCI Controls
...
[ 3.071301] com20020 0000:02:00.0 arc0-0 (uninitialized): PCI COM20020: station FFh found at F080h, IRQ 101.
[ 3.071305] com20020 0000:02:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s
[ 3.071534] com20020 0000:07:00.0: enabling device (0000 -> 0003)
[ 3.071581] (unnamed net_device) (uninitialized): PLX-PCI Controls
...
[ 3.369501] com20020 0000:07:00.0: Led pci:green:tx:0-0 renamed to pci:green:tx:0-0_1 due to name collision
[ 3.369535] com20020 0000:07:00.0: Led pci:red:recon:0-0 renamed to pci:red:recon:0-0_1 due to name collision
[ 3.370586] com20020 0000:07:00.0 arc0-0 (uninitialized): PCI COM20020: station E1h found at C000h, IRQ 35.
[ 3.370589] com20020 0000:07:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s
[ 3.370608] com20020: probe of 0000:07:00.0 failed with error -5
commit 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support")
changes the device name of all COM20020 based PCI cards,
even if only some cards support this:
snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);
The error happens because all Sohard Arcnet cards would be called arc0-0,
since the Sohard Arcnet cards don't have a PLX rotary coder.
I.e. EAE Arcnet cards have a PLX rotary coder,
which sets the first decimal, ensuring unique devices names.
This patch adds two new card feature flags to indicate
which cards support LEDs and the PLX rotary coder.
For EAE based cards the names still depend on the PLX rotary coder
(untested, since missing EAE hardware).
For Sohard based cards, this patch will result in devices
being called arc0, arc1, ... (tested).
Signed-off-by: Thomas Reichinger <thomas.reichinger@sohard.de>
Fixes: 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support")
Link: https://lore.kernel.org/r/20231130113503.6812-1-thomas.reichinger@sohard.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 52eb67861ebeb2110318bd9fe33d85ddcf92aac7.
Turns out to not be correct, a new version will be generated later.
Link: https://lore.kernel.org/r/20231204131008.384583-1-ayushdevel1325@gmail.com
Cc: Ayush Singh <ayushdevel1325@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a
cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when
removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be
dereferenced as wrong struct in irdma_free_pending_cqp_request().
PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0"
#0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34
#1 [fffffe0000549e40] nmi_handle at ffffffff810788b2
#2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f
#3 [fffffe0000549eb8] do_nmi at ffffffff81079582
#4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4
[exception RIP: native_queued_spin_lock_slowpath+1291]
RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046
RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0
RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa
R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000
R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000
-- <NMI exception stack> --
#5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b
#6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4
#7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363
#8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma]
#9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma]
#10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma]
#11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma]
#12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb
#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6
#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278
#15 [ffff88aa841efb88] device_del at ffffffff82179d23
#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice]
#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice]
#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a
#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff
#20 [ffff88aa841eff10] kthread at ffffffff811d87a0
#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn
Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Virtual QP and CQ require a 4K HW page size but the driver passes
PAGE_SIZE to ib_umem_find_best_pgsz() instead.
Fix this by using the appropriate 4k value in the bitmap passed to
ib_umem_find_best_pgsz().
Fixes: 693a5386eff0 ("RDMA/irdma: Split mr alloc and free into new functions")
Link: https://lore.kernel.org/r/20231129202143.1434-4-shiraz.saleem@intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The SQ is shared for between kernel and used by storing the kernel page
pointer and passing that to a kmap_atomic().
This then requires that the alignment is PAGE_SIZE aligned.
Fix by adding an iWarp specific alignment check.
Fixes: e965ef0e7b2c ("RDMA/irdma: Split QP handler into irdma_reg_user_mr_type_qp")
Link: https://lore.kernel.org/r/20231129202143.1434-3-shiraz.saleem@intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
64k pages introduce the situation in this diagram when the HCA 4k page
size is being used:
+-------------------------------------------+ <--- 64k aligned VA
| |
| HCA 4k page |
| |
+-------------------------------------------+
| o |
| |
| o |
| |
| o |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+ <--- Live HCA page
|OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO| <--- offset
| | <--- VA
| MR data |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+
| o |
| |
| o |
| |
| o |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+
The VA addresses are coming from rdma-core in this diagram can be
arbitrary, but for 64k pages, the VA may be offset by some number of HCA
4k pages and followed by some number of HCA 4k pages.
The current iterator doesn't account for either the preceding 4k pages or
the following 4k pages.
Fix the issue by extending the ib_block_iter to contain the number of DMA
pages like comment [1] says and by using __sg_advance to start the
iterator at the first live HCA page.
The changes are contained in a parallel set of iterator start and next
functions that are umem aware and specific to umem since there is one user
of the rdma_for_each_block() without umem.
These two fixes prevents the extra pages before and after the user MR
data.
Fix the preceding pages by using the __sq_advance field to start at the
first 4k page containing MR data.
Fix the following pages by saving the number of pgsz blocks in the
iterator state and downcounting on each next.
This fix allows for the elimination of the small page crutch noted in the
Fixes.
Fixes: 10c75ccb54e4 ("RDMA/umem: Prevent small pages from being returned by ib_umem_find_best_pgsz()")
Link: https://lore.kernel.org/r/20231129202143.1434-2-shiraz.saleem@intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- A small fix for the dirty tracking self test to fail correctly if the
code is buggy
- Fix a tricky syzkaller race UAF with object reference counting
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not UAF during iommufd_put_object()
iommufd: Add iommufd_ctx to iommufd_put_object()
iommufd/selftest: Fix _test_mock_dirty_bitmaps()
|
|
Pull vdpa fixes from Michael Tsirkin:
"Fixes in mlx5 and pds drivers"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
pds_vdpa: set features order
pds_vdpa: clear config callback when status goes to 0
pds_vdpa: fix up format-truncation complaint
vdpa/mlx5: preserve CVQ vringh index
|
|
If controller reset occurs when allocating namespace, both
nvme_reset_work and nvme_scan_work will hang, as shown below.
Test Scripts:
for ((t=1;t<=128;t++))
do
nsid=`nvme create-ns /dev/nvme1 -s 14537724 -c 14537724 -f 0 -m 0 \
-d 0 | awk -F: '{print($NF);}'`
nvme attach-ns /dev/nvme1 -n $nsid -c 0
done
nvme reset /dev/nvme1
We will find that both nvme_reset_work and nvme_scan_work hung:
INFO: task kworker/u249:4:17848 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
task:kworker/u249:4 state:D stack: 0 pid:17848 ppid: 2
flags:0x00000028
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
Call trace:
__switch_to+0xb4/0xfc
__schedule+0x22c/0x670
schedule+0x4c/0xd0
blk_mq_freeze_queue_wait+0x84/0xc0
nvme_wait_freeze+0x40/0x64 [nvme_core]
nvme_reset_work+0x1c0/0x5cc [nvme]
process_one_work+0x1d8/0x4b0
worker_thread+0x230/0x440
kthread+0x114/0x120
INFO: task kworker/u249:3:22404 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
task:kworker/u249:3 state:D stack: 0 pid:22404 ppid: 2
flags:0x00000028
Workqueue: nvme-wq nvme_scan_work [nvme_core]
Call trace:
__switch_to+0xb4/0xfc
__schedule+0x22c/0x670
schedule+0x4c/0xd0
rwsem_down_write_slowpath+0x32c/0x98c
down_write+0x70/0x80
nvme_alloc_ns+0x1ac/0x38c [nvme_core]
nvme_validate_or_alloc_ns+0xbc/0x150 [nvme_core]
nvme_scan_ns_list+0xe8/0x2e4 [nvme_core]
nvme_scan_work+0x60/0x500 [nvme_core]
process_one_work+0x1d8/0x4b0
worker_thread+0x260/0x440
kthread+0x114/0x120
INFO: task nvme:28428 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
task:nvme state:D stack: 0 pid:28428 ppid: 27119
flags:0x00000000
Call trace:
__switch_to+0xb4/0xfc
__schedule+0x22c/0x670
schedule+0x4c/0xd0
schedule_timeout+0x160/0x194
do_wait_for_common+0xac/0x1d0
__wait_for_common+0x78/0x100
wait_for_completion+0x24/0x30
__flush_work.isra.0+0x74/0x90
flush_work+0x14/0x20
nvme_reset_ctrl_sync+0x50/0x74 [nvme_core]
nvme_dev_ioctl+0x1b0/0x250 [nvme_core]
__arm64_sys_ioctl+0xa8/0xf0
el0_svc_common+0x88/0x234
do_el0_svc+0x7c/0x90
el0_svc+0x1c/0x30
el0_sync_handler+0xa8/0xb0
el0_sync+0x148/0x180
The reason for the hang is that nvme_reset_work occurs while nvme_scan_work
is still running. nvme_scan_work may add new ns into ctrl->namespaces
list after nvme_reset_work frozen all ns->q in ctrl->namespaces list.
The newly added ns is not frozen, so nvme_wait_freeze will wait forever.
Unfortunately, ctrl->namespaces_rwsem is held by nvme_reset_work, so
nvme_scan_work will also wait forever. Now we are deadlocked!
PROCESS1 PROCESS2
============== ==============
nvme_scan_work
... nvme_reset_work
nvme_validate_or_alloc_ns nvme_dev_disable
nvme_alloc_ns nvme_start_freeze
down_write ...
nvme_ns_add_to_ctrl_list ...
up_write nvme_wait_freeze
... down_read
nvme_alloc_ns blk_mq_freeze_queue_wait
down_write
Fix by marking the ctrl with say NVME_CTRL_FROZEN flag set in
nvme_start_freeze and cleared in nvme_unfreeze. Then the scan can check
it before adding the new namespace (under the namespaces_rwsem).
Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Reviewed-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch fixes the smatch warning, "nvmet_ns_ana_grpid_store() warn:
potential spectre issue 'nvmet_ana_group_enabled' [w] (local cap)"
Prevent the contents of kernel memory from being leaked to user space
via speculative execution by using array_index_nospec.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Currently two similar config options NVME_HOST_AUTH and NVME_TARGET_AUTH
have almost same descriptions. It is confusing to choose them in
menuconfig. Improve the descriptions to distinguish them.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This can be an expensive call on some kernel configs. Move it to the end
after checking the cheaper ways to determine if the command is allowed.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
A different CPU may be setting the ctrl->state value, so ensure proper
barriers to prevent optimizing to a stale state. Normally it isn't a
problem to observe the wrong state as it is merely advisory to take a
quicker path during initialization and error recovery, but seeing an old
state can report unexpected ENETRESET errors when a reset request was in
fact successful.
Reported-by: Minh Hoang <mh2022@meta.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
|
|
The controller state is typically written by another CPU, so reading it
should ensure no optimizations are taken. This is a repeated pattern in
the driver, so start with adding a convenience function that returns the
controller state with READ_ONCE().
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting
indefinitely. It is a handbrake for sim racing detected as joystick.
Reported and tested by GitHub user N0th1ngM4tt3rs.
Link: https://github.com/sriemer/fix-linux-mouse issue 22
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Users have reported problems with recent Lenovo laptops that contain
an IDEA5002 I2C HID device. Reports include fans turning on and
running even at idle and spurious wakeups from suspend.
Presumably in the Windows ecosystem there is an application that
uses the HID device. Maybe that puts it into a lower power state so
it doesn't cause spurious events.
This device doesn't serve any functional purpose in Linux as nothing
interacts with it so blacklist it from being probed. This will
prevent the GPIO driver from setting up the GPIO and the spurious
interrupts and wake events will not occur.
Cc: stable@vger.kernel.org # 6.1
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
If a pin isn't marked as a wake source processing any interrupts is
just going to destroy battery life. The APU may wake up from a hardware
sleep state to process the interrupt but not return control to the OS.
Mask interrupt for all non-wake source pins at suspend. They'll be
re-enabled at resume.
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231203032431.30277-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Commit 4e0400525691 ("virtio-blk: support polling I/O") triggers the
following gcc 13 W=1 warnings:
drivers/block/virtio_blk.c: In function ‘init_vq’:
drivers/block/virtio_blk.c:1077:68: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 7 [-Wformat-truncation=]
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~
drivers/block/virtio_blk.c:1077:58: note: directive argument in the range [-2147483648, 65534]
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~~~~~~~~~~~~
drivers/block/virtio_blk.c:1077:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is a false positive because the lower bound -2147483648 is
incorrect. The true range of i is [0, num_vqs - 1] where 0 < num_vqs <
65536.
The code mixes int, unsigned short, and unsigned int types in addition
to using "%d" for an unsigned value. Use unsigned short and "%u"
consistently to solve the compiler warning.
Cc: Suwan Kim <suwan.kim027@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312041509.DIyvEt9h-lkp@intel.com/
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204140743.1487843-1-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In mcp3564_config() fix the hardware identification logic
based on the hardware ID registers. Second part of the code was
disabled by an logic error.
Fix a typo related to the "MODULE_DESCRIPTION".
Fixes: 33ec3e5fc1ea (iio: adc: adding support for MCP3564 ADC)
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20231129135619.63475-1-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The current implementation uses the AND (&&) operator to check if the
value to write for IIO_CHAN_INFO_CALIBBIAS and IIO_CHAN_INFO_CALIBSCALE
is within the valid ranges.
The evaluated values are the lower and upper limits of the ranges,
so this operation always evaluates to false.
The OR (||) operator must be used instead.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20231201-mcp3564_range_checks-v1-1-68f4436e22b0@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Now the APIs virtqueue_dma_sync_single_range_for_{cpu,device} ignore
the parameter 'dir', that is a mistake.
[ 6.101666] ------------[ cut here ]------------
[ 6.102079] DMA-API: virtio-pci 0000:00:04.0: device driver syncs DMA memory with different direction [device address=0x00000000ae010000] [size=32752 bytes] [mapped with DMA_FROM_DEVICE] [synced with DMA_BIDIRECTIONAL]
[ 6.103630] WARNING: CPU: 6 PID: 0 at kernel/dma/debug.c:1125 check_sync+0x53e/0x6c0
[ 6.107420] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 6.6.0+ #290
[ 6.108030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 6.108936] RIP: 0010:check_sync+0x53e/0x6c0
[ 6.109289] Code: 24 10 e8 f5 d9 74 00 4c 8b 4c 24 10 4c 8b 44 24 18 48 8b 4c 24 20 48 89 c6 41 56 4c 89 ea 48 c7 c7 b0 f1 50 82 e8 32 fc f3 ff <0f> 0b 48 c7 c7 48 4b 4a 82 e8 74 d9 fc ff 8b 73 4c 48 8d 7b 50 31
[ 6.110750] RSP: 0018:ffffc90000180cd8 EFLAGS: 00010092
[ 6.111178] RAX: 00000000000000ce RBX: ffff888100aa5900 RCX: 0000000000000000
[ 6.111744] RDX: 0000000000000104 RSI: ffffffff824c3208 RDI: 00000000ffffffff
[ 6.112316] RBP: ffffc90000180d40 R08: 0000000000000000 R09: 00000000fffeffff
[ 6.112893] R10: ffffc90000180b98 R11: ffffffff82f63308 R12: ffffffff83d5af00
[ 6.113460] R13: ffff888100998200 R14: ffffffff824a4b5f R15: 0000000000000286
[ 6.114027] FS: 0000000000000000(0000) GS:ffff88842fd80000(0000) knlGS:0000000000000000
[ 6.114665] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.115128] CR2: 00007f10f1e03030 CR3: 0000000108272004 CR4: 0000000000770ee0
[ 6.115701] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6.116272] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6.116842] PKRU: 55555554
[ 6.117069] Call Trace:
[ 6.117275] <IRQ>
[ 6.117452] ? __warn+0x84/0x140
[ 6.117727] ? check_sync+0x53e/0x6c0
[ 6.118034] ? __report_bug+0xea/0x100
[ 6.118353] ? check_sync+0x53e/0x6c0
[ 6.118653] ? report_bug+0x41/0xc0
[ 6.118944] ? handle_bug+0x3c/0x70
[ 6.119237] ? exc_invalid_op+0x18/0x70
[ 6.119551] ? asm_exc_invalid_op+0x1a/0x20
[ 6.119900] ? check_sync+0x53e/0x6c0
[ 6.120199] ? check_sync+0x53e/0x6c0
[ 6.120499] debug_dma_sync_single_for_cpu+0x5c/0x70
[ 6.120906] ? dma_sync_single_for_cpu+0xb7/0x100
[ 6.121291] virtnet_rq_unmap+0x158/0x170 [virtio_net]
[ 6.121716] virtnet_receive+0x196/0x220 [virtio_net]
[ 6.122135] virtnet_poll+0x48/0x1b0 [virtio_net]
[ 6.122524] __napi_poll+0x29/0x1b0
[ 6.123083] net_rx_action+0x282/0x360
[ 6.123612] __do_softirq+0xf3/0x2fb
[ 6.124138] __irq_exit_rcu+0x8e/0xf0
[ 6.124663] common_interrupt+0xbc/0xe0
[ 6.125202] </IRQ>
We need to enable CONFIG_DMA_API_DEBUG and work with need sync mode(such
as swiotlb) to reproduce this warn.
Fixes: 8bd2f71054bd ("virtio_ring: introduce dma sync api for virtqueue")
Reported-by: "Ning, Hongyu" <hongyu.ning@linux.intel.com>
Closes: https://lore.kernel.org/all/f37cb55a-6fc8-4e21-8789-46d468325eea@linux.intel.com/
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20231201033303.25141-1-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
|
|
When typec_altmode_put_partner is called by a plug altmode upon release,
the port altmode the plug belongs to will not remove its reference to the
plug. The check to see if the altmode being released evaluates against the
released altmode's partner instead of the calling altmode itself, so change
adev in typec_altmode_put_partner to properly refer to the altmode being
released.
typec_altmode_set_partner is not run for port altmodes, so also add a check
in typec_altmode_release to prevent typec_altmode_put_partner() calls on
port altmode release.
Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The KOBJ_CHANGE uevent is sent before gadget unbind is actually
executed, resulting in inaccurate uevent emitted at incorrect timing
(the uevent would have USB_UDC_DRIVER variable set while it would
soon be removed).
Move the KOBJ_CHANGE uevent to the end of the unbind function so that
uevent is sent only after the change has been made.
Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class")
Cc: stable@vger.kernel.org
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
devm_hwmon_device_register_with_groups() returns an error pointer upon
failure. Check its return value for errors.
Compile-tested only.
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Compile-tested only.
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The secure boot state of the BlueField SoC is represented by two bits:
0 = production state
1 = secure boot enabled
2 = non-secure (secure boot disabled)
3 = RMA state
There is also a single bit to indicate whether production keys or
development keys are being used when secure boot is enabled.
This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has
meaning if secure boot state equals 1 (secure boot enabled).
The secure boot states are as follows:
- “GA secured” is when secure boot is enabled with official production keys.
- “Secured (development)” is when secure boot is enabled with development keys.
Without this fix “GA Secured” is displayed on development cards which is
misleading. This patch updates the logic in "lifecycle_state_show()" to
handle the case where the SoC is configured for secure boot and is using
development keys.
Fixes: 79e29cb8fbc5c ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20231130183515.17214-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since commit 0ec7731655de ("regmap: Ensure range selector registers
are updated after cache sync") opening pcm512x based soundcards fail
with EINVAL and dmesg shows sync cache and pm_runtime_get errors:
[ 228.794676] pcm512x 1-004c: Failed to sync cache: -22
[ 228.794740] pcm512x 1-004c: ASoC: error at snd_soc_pcm_component_pm_runtime_get on pcm512x.1-004c: -22
This is caused by the cache check result leaking out into the
regcache_sync return value.
Fix this by making the check local-only, as the comment above the
regcache_read call states a non-zero return value means there's
nothing to do so the return value should not be altered.
Fixes: 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20231203222216.96547-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
indexing mode
The multiplier is already promoted to unsigned long, however the
frequency calculations done when using level indexing mode doesn't
use the multiplier computed. It instead hardcodes the multiplier
value of 1000 at all the usage sites.
Clean that up by assigning the multiplier value of 1000 when using
the perf level indexing mode and update the frequency calculations to
use the multiplier instead. It should fix the possible frequency
truncation for all the values greater than or equal to 4GHz on 64-bit
machines.
Fixes: 31c7c1397a33 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-2-sudeep.holla@arm.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Fix the possible frequency truncation for all values equal to or greater
4GHz on 64bit machines by updating the multiplier 'mult_factor' to
'unsigned long' type. It is also possible that the multiplier itself can
be greater than or equal to 2^32. So we need to also fix the equation
computing the value of the multiplier.
Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_aldps_en().
Fixes: 4214cc550bf9 ("r8152: check if disabling ALDPS is finished")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_pre_firmware_1().
Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in
r8156b_wait_loading_flash().
Fixes: 195aae321c82 ("r8152: support new chips")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previous commits added checks for RTL8152_INACCESSIBLE in the loops in
the driver. There are still a few more that keep tripping the driver
up in error cases and make things take longer than they should. Add
those in.
All the loops that are part of this commit existed in some form or
another since the r8152 driver was first introduced, though
RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit
715f67f33af4 ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE")
Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As of commit d9962b0d4202 ("r8152: Block future register access if
register access fails") there is a race condition that can happen
between the USB device reset thread and napi_enable() (not) getting
called during rtl8152_open(). Specifically:
* While rtl8152_open() is running we get a register access error
that's _not_ -ENODEV and queue up a USB reset.
* rtl8152_open() exits before calling napi_enable() due to any reason
(including usb_submit_urb() returning an error).
In that case:
* Since the USB reset is perform in a separate thread asynchronously,
it can run at anytime USB device lock is not held - even before
rtl8152_open() has exited with an error and caused __dev_open() to
clear the __LINK_STATE_START bit.
* The rtl8152_pre_reset() will notice that the netif_running() returns
true (since __LINK_STATE_START wasn't cleared) so it won't exit
early.
* rtl8152_pre_reset() will then hang in napi_disable() because
napi_enable() was never called.
We can fix the race by making sure that the r8152 reset routines don't
run at the same time as we're opening the device. Specifically we need
the reset routines in their entirety rely on the return value of
netif_running(). The only way to reliably depend on that is for them
to hold the rntl_lock() mutex for the duration of reset.
Grabbing the rntl_lock() mutex for the duration of reset seems like a
long time, but reset is not expected to be common and the rtnl_lock()
mutex is already held for long durations since the core grabs it
around the open/close calls.
Fixes: d9962b0d4202 ("r8152: Block future register access if register access fails")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to Amlogic custom kernels ADC of axg SoC family has
vref_select and requires this setting to work nominally and thus
needs a separate config.
Fixes: 90c6241860bf ("iio: adc: meson: init voltage control bits")
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231127235558.71995-1-gnstark@salutedevices.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The driver always registers pin configurations in device tree. This can
cause some inconvenience to users, as pin configurations in the base
device tree cannot be disabled in the device tree overlay, even when the
relevant devices are not used.
Ignore disabled pin configuration nodes in device tree.
Fixes: ec648f6b7686 ("pinctrl: starfive: Add pinctrl driver for StarFive SoCs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/fe4c15dcc3074412326b8dc296b0cbccf79c49bf.1701422582.git.namcao@linutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The driver always registers pin configurations in device tree. This can
cause some inconvenience to users, as pin configurations in the base
device tree cannot be disabled in the device tree overlay, even when the
relevant devices are not used.
Ignore disabled pin configuration nodes in device tree.
Fixes: 447976ab62c5 ("pinctrl: starfive: Add StarFive JH7110 sys controller driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/fd8bf044799ae50a6291ae150ef87b4f1923cacb.1701422582.git.namcao@linutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
According to the spec, this ADC totally support 8 channels.
i.MX93 contain this ADC with 4 channels connected to pins in
the package. i.MX95 contain this ADC with 8 channels connected
to pins in the package.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Fixes: 7d02296ac8b8 ("iio: adc: add imx93 adc support")
Link: https://lore.kernel.org/r/20231116071026.611269-1-haibo.chen@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix wrong handling of a DMA request where the probing only failed
if -EPROPE_DEFER was returned. Instead, let us fail if a non -ENODEV
value is returned. This makes DMAs explicitly optional. Even if the
DMA request is unsuccessfully, the ADC can still work properly.
We do also handle the defer probe case by making use of dev_err_probe().
Fixes: f438b9da75eb ("drivers: iio: ti_am335x_adc: add dma support")
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20230925134427.214556-1-w.egorov@phytec.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Ensure that the following values are little-endian:
- header->pad (which is used for cport_id)
- header->size
Fixes: ec558bbfea67 ("greybus: Add BeaglePlay Linux Driver")
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/r/202311072329.Xogj7hGW-lkp@intel.com/
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Link: https://lore.kernel.org/r/20231203075312.255233-1-ayushdevel1325@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The gb-beagleplay driver uses crc_ccitt(), so it should select
CRC_CCITT to make sure that the function is available.
Fixes these build errors:
s390-linux-ld: drivers/greybus/gb-beagleplay.o: in function `hdlc_append_tx_u8':
gb-beagleplay.c:(.text+0x2c0): undefined reference to `crc_ccitt'
s390-linux-ld: drivers/greybus/gb-beagleplay.o: in function `hdlc_rx_frame':
gb-beagleplay.c:(.text+0x6a0): undefined reference to `crc_ccitt'
Fixes: ec558bbfea67 ("greybus: Add BeaglePlay Linux Driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ayush Singh <ayushdevel1325@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: greybus-dev@lists.linaro.org
Link: https://lore.kernel.org/r/20231031040909.21201-1-rdunlap@infradead.org
Reviewed-by: Ayush Singh <ayushdevel1325@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need 6.7-rc4 in here as we need to revert one of the debugfs changes
that came in that release through the wireless tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check the return value of i2c_add_adapter. Static analysis revealed that
the function did not properly handle potential failures of
i2c_add_adapter, which could lead to partial initialization of the I2C
adapter and unstable operation.
Signed-off-by: Haoran Liu <liuhaoran14@163.com>
Link: https://lore.kernel.org/r/20231203164653.38983-1-liuhaoran14@163.com
Fixes: d7535ffa427b ("Input: driver for microcontroller keys on the iPaq h3xxx")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
