| Age | Commit message (Collapse) | Author |
|---|
|
show_energy_performance_available_preferences() to show only supported
values which is performance in performance governor policy.
-------Before--------
$ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver
amd-pstate-epp
$ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
performance
$ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_preference
performance
$ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_available_preferences
default performance balance_performance balance_power power
-------After--------
$ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver
amd-pstate-epp
$ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
performance
$ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_preference
performance
$ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_available_preferences
performance
Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Suggested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely")
changed the meaning of MAX_ORDER from exclusive to inclusive. So, we
can allocate compound pages with up to 1 << MAX_ORDER pages.
Reflect this change in dm-flakey and start trying to allocate compound
pages with MAX_ORDER.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
dm_verity_fec_io is placed after the end of two hash digests. If the hash
digest has unaligned length, struct dm_verity_fec_io could be unaligned.
This commit fixes the placement of struct dm_verity_fec_io, so that it's
aligned.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: a739ff3f543a ("dm verity: add support for forward error correction")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
We found an issue under Android OTA scenario that many BIOs have to do
FEC where the data under dm-verity is 100% complete and no corruption.
Android OTA has many dm-block layers, from upper to lower:
dm-verity
dm-snapshot
dm-origin & dm-cow
dm-linear
ufs
DM tables have to change 2 times during Android OTA merging process.
When doing table change, the dm-snapshot will be suspended for a while.
During this interval, many readahead IOs are submitted to dm_verity
from filesystem. Then the kverity works are busy doing FEC process
which cost too much time to finish dm-verity IO. This causes needless
delay which feels like system is hung.
After adding debugging it was found that each readahead IO needed
around 10s to finish when this situation occurred. This is due to IO
amplification:
dm-snapshot suspend
erofs_readahead // 300+ io is submitted
dm_submit_bio (dm_verity)
dm_submit_bio (dm_snapshot)
bio return EIO
bio got nothing, it's empty
verity_end_io
verity_verify_io
forloop range(0, io->n_blocks) // each io->nblocks ~= 20
verity_fec_decode
fec_decode_rsb
fec_read_bufs
forloop range(0, v->fec->rsn) // v->fec->rsn = 253
new_read
submit_bio (dm_snapshot)
end loop
end loop
dm-snapshot resume
Readahead BIOs get nothing while dm-snapshot is suspended, so all of
them will cause verity's FEC.
Each readahead BIO needs to verify ~20 (io->nblocks) blocks.
Each block needs to do FEC, and every block needs to do 253
(v->fec->rsn) reads.
So during the suspend interval(~200ms), 300 readahead BIOs trigger
~1518000 (300*20*253) IOs to dm-snapshot.
As readahead IO is not required by userspace, and to fix this issue,
it is best to pass readahead errors to upper layer to handle it.
Cc: stable@vger.kernel.org
Fixes: a739ff3f543a ("dm verity: add support for forward error correction")
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
If BIO error, verity_end_io() can call verity_finish_io() before
verity_fec_init_io(). Therefore, fec_io->rs is not initialized and
may crash when doing memory freeing in verity_fec_finish_io().
Crash call stack:
die+0x90/0x2b8
__do_kernel_fault+0x260/0x298
do_bad_area+0x2c/0xdc
do_translation_fault+0x3c/0x54
do_mem_abort+0x54/0x118
el1_abort+0x38/0x5c
el1h_64_sync_handler+0x50/0x90
el1h_64_sync+0x64/0x6c
free_rs+0x18/0xac
fec_rs_free+0x10/0x24
mempool_free+0x58/0x148
verity_fec_finish_io+0x4c/0xb0
verity_end_io+0xb8/0x150
Cc: stable@vger.kernel.org # v6.0+
Fixes: 5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature")
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
When amd_pstate is running, writing to scaling_min_freq and
scaling_max_freq has no effect. These values are only passed to the
policy level, but not to the platform level. This means that the
platform does not know about the frequency limits set by the user.
To fix this, update the min_perf and max_perf values at the platform
level whenever the user changes the scaling_min_freq and scaling_max_freq
values.
Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
mipi_dsi_device_register_full() never returns NULL pointer, it
will return ERR_PTR() when it fails, so replace the check with
IS_ERR().
Fixes: 0993234a0045 ("drm/panel: Add driver for Novatek NT36523")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231129090715.856263-1-yangyingliang@huaweicloud.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231129090715.856263-1-yangyingliang@huaweicloud.com
|
|
For the "starry, 2081101qfh032011-53g" panel, it is stipulated in the
panel spec that MIPI needs to keep the LP11 state before the
lcm_reset pin is pulled high.
Fixes: 6069b66cd962 ("drm/panel: support for STARRY 2081101QFH032011-53G MIPI-DSI panel")
Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix a really interesting potential core bug in the list iterator
requireing the use of READ_ONCE() discovered when testing kernel
compiles with clang.
- Check devm_kcalloc() return value and an array bounds in the STM32
driver.
- Fix an exotic string truncation issue in the s32cc driver, found by
the kernel test robot (impressive!)
- Fix an undocumented struct member in the cy8c95x0 driver.
- Fix a symbol overlap with MIPS in the Lochnagar driver, MIPS defines
a global symbol "RST" which is a bit too generic and collide with
stuff. OK this one should be renamed too, we will fix that as well.
- Fix erroneous branch taking in the Realtek driver.
- Fix the mail address in MAINTAINERS for the s32g2 driver.
* tag 'pinctrl-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: s32g2: change a maintainer email address
pinctrl: realtek: Fix logical error when finding descriptor
pinctrl: lochnagar: Don't build on MIPS
pinctrl: avoid reload of p state in list iteration
pinctrl: cy8c95x0: Fix doc warning
pinctrl: s32cc: Avoid possible string truncation
pinctrl: stm32: fix array read out of bound
pinctrl: stm32: Add check for devm_kcalloc
|
|
Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.
Do not return negative number in case of issue, when
ssam_controller_receive_buf() returns ESHUTDOWN just returns 0, e.g. no
bytes consumed, this keep the exact same behavior as it was before.
This fixes a potential WARN in serdev-ttyport.c:ttyport_receive_buf().
Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231128194935.11350-1-francesco@dolcini.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
We used to call intel_pre_plane_updates() for any pipe going through
a modeset whether the pipe was previously enabled or not. This in
fact needed to apply all the necessary clock gating workarounds/etc.
Restore the correct behaviour.
Fixes: 39919997322f ("drm/i915: Disable all planes before modesetting any pipes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-3-ville.syrjala@linux.intel.com
(cherry picked from commit e0d5ce11ed0a21bb2bf328ad82fd261783c7ad88)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Unfortunately even the HPD based detection added in
commit cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe")
fails to detect that the VBT's eDP/DDI-A is a ghost on
Asus B360M-A (CFL+CNP). On that board eDP/DDI-A has its HPD
asserted despite nothing being actually connected there :(
The straps/fuses also indicate that the eDP port is present.
So if one boots with a VGA monitor connected the eDP probe will
mistake the DP->VGA converter hooked to DDI-E for an eDP panel
on DDI-A.
As a last resort check what kind of DP device we've detected,
and if it looks like a DP->VGA converter then conclude that
the eDP port should be ignored.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9636
Fixes: cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114142333.15799-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit fcd479a79120bf0cd507d85f898297a3b868dda6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The GSC CS is not exposed to the user, so we skipped assigning a uabi
class number for it. However, the trace logs use the uabi class and
instance to identify the engine, so leaving uabi class unset makes the
GSC CS show up as the RCS in those logs.
Given that the engine is not exposed to the user, we can't add a new
case in the uabi enum, so we insted internally define a kernel
internal class as -1.
At the same time remove special handling for the name and complete
the uabi_classes array so internal class is automatically correctly
assigned.
Engine will show as 65535:0 other0 in the logs/traces which should
be unique enough.
v2:
* Fix uabi class u8 vs u16 type confusion.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 194babe26bdc ("drm/i915/mtl: don't expose GSC command streamer to the user")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116084456.291533-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit dfed6b58d54f3a5d7e6bc1fb060e2c936330eba2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Fix races between ravb_tx_timeout_work() and functions of net_device_ops
and ethtool_ops by using rtnl_trylock() and rtnl_unlock(). Note that
since ravb_close() is under the rtnl lock and calls cancel_work_sync(),
ravb_tx_timeout_work() should calls rtnl_trylock(). Otherwise, a deadlock
may happen in ravb_tx_timeout_work() like below:
CPU0 CPU1
ravb_tx_timeout()
schedule_work()
...
__dev_close_many()
// Under rtnl lock
ravb_close()
cancel_work_sync()
// Waiting
ravb_tx_timeout_work()
rtnl_lock()
// This is possible to cause a deadlock
If rtnl_trylock() fails, rescheduling the work with sleep for 1 msec.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231127122420.3706751-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__counted_by
Fake flexible arrays (zero-length and one-element arrays) are deprecated,
and should be replaced by flexible-array members. So, replace
zero-length array with a flexible-array member in `struct
PACKED_REGISTRY_TABLE`.
Also annotate array `entries` with `__counted_by()` to prepare for the
coming implementation by GCC and Clang of the `__counted_by` attribute.
Flexible array members annotated with `__counted_by` can have their
accesses bounds-checked at run-time via `CONFIG_UBSAN_BOUNDS` (for array
indexing) and `CONFIG_FORTIFY_SOURCE` (for strcpy/memcpy-family functions).
This fixes multiple -Warray-bounds warnings:
drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1069:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=]
drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1070:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=]
drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1071:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=]
drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1072:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=]
While there, also make use of the struct_size() helper, and address
checkpatch.pl warning:
WARNING: please, no spaces at the start of a line
This results in no differences in binary output.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZVZbX7C5suLMiBf+@work
|
|
This unlock doesn't belong here and it leads to a double unlock in
the caller, r535_gsp_rpc_push().
Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0293812-c05d-45f0-a535-3f24fe582c02@moroto.mountain
|
|
With the new uapi we don't have the comp flags on the allocation,
so we shouldn't be using the first size that works, we should be
iterating until we get the correct one.
This reduces allocations from 2MB to 64k in lots of places.
Fixes dEQP-VK.memory.allocation.basic.size_8KiB.forward.count_4000
on my ampere/gsp system.
Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811031520.248341-1-airlied@gmail.com
|
|
dev_coredumpm() creates a devcoredump device and adds it
to the core kernel framework which eventually end up
sending uevent to the user space and later creates a
symbolic link to the failed device. An application
running in userspace may be interested in this symbolic
link to get the name of the failed device.
In a issue scenario, once uevent sent to the user space
it start reading '/sys/class/devcoredump/devcdX/failing_device'
to get the actual name of the device which might not been
created and it is in its path of creation.
To fix this, suppress sending uevent till the failing device
symbolic link gets created and send uevent once symbolic
link is created successfully.
Fixes: 833c95456a70 ("device coredump: add new device coredump class")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The power values coming from the Energy Model are already in uW.
The PowerCap and DTPM frameworks operate on uW, so all places should
just use the values from the EM.
Fix the code by removing all of the conversion to uW still present in it.
Fixes: ae6ccaa65038 (PM: EM: convert power field to micro-Watts precision and align drivers)
Cc: 5.19+ <stable@vger.kernel.org> # v5.19+
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
cpufreq_driver->fast_switch() callback expects a frequency as a return
value. amd_pstate_fast_switch() was returning the return value of
amd_pstate_update_freq(), which only indicates a success or failure.
Fix this by making amd_pstate_fast_switch() return the target_freq
when the call to amd_pstate_update_freq() is successful, and return
the current frequency from policy->cur when the call to
amd_pstate_update_freq() is unsuccessful.
Fixes: 4badf2eb1e98 ("cpufreq: amd-pstate: Add ->fast_switch() callback")
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Cc: 6.4+ <stable@vger.kernel.org> # v6.4+
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ASUS have worked around an issue in XInput where it doesn't support USB
selective suspend, which causes suspend issues in Windows. They worked
around this by adjusting the MCU firmware to disable the USB0 hub when
the screen is switched off during the Microsoft DSM suspend path in ACPI.
The issue we have with this however is one of timing - the call the tells
the MCU to this isn't able to complete before suspend is done so we call
this in a prepare() and add a small msleep() to ensure it is done. This
must be done before the screen is switched off to prevent a variety of
possible races.
Further to this the MCU powersave option must also be disabled as it can
cause a number of issues such as:
- unreliable resume connection of N-Key
- complete loss of N-Key if the power is plugged in while suspended
Disabling the powersave option prevents this.
Without this the MCU is unable to initialise itself correctly on resume.
Signed-off-by: "Luke D. Jones" <luke@ljones.dev>
Tested-by: Philip Mueller <philm@manjaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231126230521.125708-2-luke@ljones.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ndo_stop() is RTNL-protected by net core, and the worker function takes
RTNL as well. Therefore we will deadlock when trying to execute a
pending work synchronously. To fix this execute any pending work
asynchronously. This will do no harm because netif_running() is false
in ndo_stop(), and therefore the work function is effectively a no-op.
However we have to ensure that no task is running or pending after
rtl_remove_one(), therefore add a call to cancel_work_sync().
Fixes: abe5fc42f9ce ("r8169: use RTNL to protect critical sections")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/12395867-1d17-4cac-aa7d-c691938fcddf@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The original change results in a deadlock if jumbo mtu mode is used.
Reason is that the phydev lock is held when rtl_reset_work() is called
here, and rtl_jumbo_config() calls phy_start_aneg() which also tries
to acquire the phydev lock. Fix this by calling rtl_reset_work()
asynchronously.
Fixes: 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125")
Reported-by: Ian Chen <free122448@hotmail.com>
Tested-by: Ian Chen <free122448@hotmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/caf6a487-ef8c-4570-88f9-f47a659faf33@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a task needs to accept memory it will scan the accepting_list
to see if any ranges already being processed by other tasks overlap
with its range. Due to an off-by-one in the range comparisons, a task
might falsely determine that an overlapping range is being accepted,
leading to an unnecessary delay before it begins processing the range.
Fix the off-by-one in the range comparison to prevent this and slightly
improve performance.
Fixes: 50e782a86c98 ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance")
Link: https://lore.kernel.org/linux-mm/20231101004523.vseyi5bezgfaht5i@amd.com/T/#me2eceb9906fcae5fe958b3fe88e41f920f8335b6
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Return -ENOMEM if xen_irq_init() fails. currently the code returns an
uninitialized variable or zero.
Fixes: 5dd9ad32d775 ("xen/events: drop xen_allocate_irqs_dynamic()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Juergen Gross <jgross@ssue.com>
Link: https://lore.kernel.org/r/3b9ab040-a92e-4e35-b687-3a95890a9ace@moroto.mountain
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
TC ingress policer rules depends on interface receive queue
contexts since the bandwidth profiles are attached to RQ
contexts. When an interface is brought down all the queue
contexts are freed. This in turn frees bandwidth profiles in
hardware causing ingress police rules non-functional after
the interface is brought up. Fix this by applying all the ingress
police rules config to hardware in otx2_open. Also allow
adding ingress rules only when interface is running
since no contexts exist for the interface when it is down.
Fixes: 68fbff68dbea ("octeontx2-pf: Add police action for TC flower")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/1700930217-5707-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When more than 64 VFs are enabled for a PF then mbox communication
between VF and PF is not working as mbox work queueing for few VFs
are skipped due to wrong calculation of VF numbers.
Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/1700930042-5400-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before
reset") caused a regression reproducable on omap4 duovero where the ISS
target module can produce interconnect errors on boot. Turns out the
registers are not accessible until after a delay for devices needing
a ti,sysc-delay-us value.
Let's fix this by flushing the posted write only after the reset delay.
We do flushing also for ti,sysc-delay-us using devices as that should
trigger an interconnect error if the delay is not properly configured.
Let's also add some comments while at it.
Fixes: 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before reset")
Cc: stable@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Commit aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts
by default") tries to disable MMC interrupts to avoid a storm of
unhandled interrupts, but leaves the FPE(Frame Preemption) MMC
interrupts enabled, FPE MMC interrupts can cause the same problem.
Now we mask FPE TX and RX interrupts to disable all MMC interrupts.
Fixes: aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231125060126.2328690-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
"GPL-2.0-only" in the license header was incorrectly changed to the
now deprecated "GPL-2.0". Fix.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Reported-by: David Edelsohn <dje.gcc@gmail.com>
Closes: https://lore.kernel.org/dri-devel/5lfrhdpkwhpgzipgngojs3tyqfqbesifzu5nf4l5q3nhfdhcf2@25nmiq7tfrew/T/#m5c356d68815711eea30dd94cc6f7ea8cd4344fe3
Fixes: f7749a549b4f ("drm/gpuvm: Dual-licence the drm_gpuvm code GPL-2.0 OR MIT")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231106114827.62492-1-thomas.hellstrom@linux.intel.com
|
|
device"
This reverts commit 199cf07ebd2b0d41185ac79b895547d45610b681.
This patch creates bugs on devices where the DRM device is
the ancestor of the panel devices.
Attempts to fix this have failed because it leads to using
device core functionality which is questionable.
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-3-69bb05048dae@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-3-69bb05048dae@linaro.org
|
|
This reverts commit 1d5e8f4bf06da86b71cc9169110d1a0e1e7af337.
Greg says: "why exactly is this needed? Nothing outside of
the driver core should be needing this function, it shouldn't
be public at all (I missed that before.)
So please, revert it for now, let's figure out why DRM thinks
this is needed for it's devices, and yet no other bus/subsystem
does."
Link: https://lore.kernel.org/dri-devel/2023112739-willing-sighing-6bdd@gregkh/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-1-69bb05048dae@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-1-69bb05048dae@linaro.org
|
|
This reverts commit 39d5b6a64ace77d0c11c398d272218df5f939abb.
This patch was causing build errors by using an unexported
function from the device core, which Greg questions the
saneness in exporting.
Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-2-69bb05048dae@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-2-69bb05048dae@linaro.org
|
|
Start from ACE1.x, DOAISE is added to AC timing control
register bit 5, it combines with DOAIS to get effective
timing, and has the default value 1.
The current code fills DOAIS, DACTQE and DODS bits to a
variable initialized to zero, and updates the variable
to AC timing control register. With this operation, We
change DOAISE to 0, and force a much more aggressive
timing. The timing is even unable to form a working
waveform on SDA pin.
This patch uses read-modify-write operation for the AC
timing control register access, thus makes sure those
bits not supposed and intended to change are not touched.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20231127124735.2080562-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A loop in rvu_mbox_handler_nix_bandprof_free() contains
a break if (idx == MAX_BANDPROF_PER_PFFUNC),
but if idx may reach MAX_BANDPROF_PER_PFFUNC
buffer '(*req->prof_idx)[layer]' overflow happens before that check.
The patch moves the break to the
beginning of the loop.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e8e095b3b370 ("octeontx2-af: cn10k: Bandwidth profiles config support").
Signed-off-by: Elena Salomatkina <elena.salomatkina.cmc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20231124210802.109763-1-elena.salomatkina.cmc@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
SCLK_SDMMC is the parent for SCLK_SDMMC_DRV and SCLK_SDMMC_SAMPLE, but
used with the (more) correct name sclk_sdmmc. SD card tuning does currently
fail as the parent can't be found under that name.
There is no need to suffix the name with '0' since RK312x SoCs do have a
single sdmmc controller - so rename it to the name which is already used
by it's children.
Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
According to the TRM there are no specific gpll_peri, cpll_peri,
gpll_div2_peri or gpll_div3_peri gates, but a single clk_peri_src gate.
Instead mux_clk_peri_src directly connects to the plls respectively the pll
divider clocks.
Fix this by creating a single gated composite.
Also rename all occurrences of aclk_peri_src to clk_peri_src, since it
is the parent for peri aclks, pclks and hclks. That name also matches
the one used in the TRM.
Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
[renamed aclk_peri_src -> clk_peri_src and added commit message]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
If bus is marked as multi_link, but number of masters in the stream is
not higher than bus->hw_sync_min_links (bus->multi_link && m_rt_count >=
bus->hw_sync_min_links), bank switching should not happen. The first
part of do_bank_switch() code properly takes these conditions into
account, but second part (sdw_ml_sync_bank_switch()) relies purely on
bus->multi_link property. This is not balanced and leads to NULL
pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
Call trace:
wait_for_completion_timeout+0x124/0x1f0
do_bank_switch+0x370/0x6f8
sdw_prepare_stream+0x2d0/0x438
qcom_snd_sdw_prepare+0xa0/0x118
sm8450_snd_prepare+0x128/0x148
snd_soc_link_prepare+0x5c/0xe8
__soc_pcm_prepare+0x28/0x1ec
dpcm_be_dai_prepare+0x1e0/0x2c0
dpcm_fe_dai_prepare+0x108/0x28c
snd_pcm_do_prepare+0x44/0x68
snd_pcm_action_single+0x54/0xc0
snd_pcm_action_nonatomic+0xe4/0xec
snd_pcm_prepare+0xc4/0x114
snd_pcm_common_ioctl+0x1154/0x1cc0
snd_pcm_ioctl+0x54/0x74
Fixes: ce6e74d008ff ("soundwire: Add support for multi link bank switch")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124180136.390621-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab.
* tag 'media/v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: pci: mgb4: add COMMON_CLK dependency
media: v4l2-subdev: Fix a 64bit bug
media: mgb4: Added support for T200 card variant
media: vsp1: Remove unbalanced .s_stream(0) calls
|
|
The IFLA_NETKIT_PEER_INFO attribute can only be used during device
creation, but not via changelink callback. Hence reject it there.
Fixes: 35dfaad7188c ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/e86a277a1e8d3b19890312779e42f790b0605ea4.1701115314.git.daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
SM_GCC_8550 depends on ARM64 but it is selected by
SM_CAMCC_8550, which should have the same dependencies
as SM_GCC_8550 to avoid the below Kconfig warning reported
by kernel test robot.
WARNING: unmet direct dependencies detected for SM_GCC_8550
Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n])
Selected by [y]:
- SM_CAMCC_8550 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y]
Fixes: ccc4e6a061a2 ("clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311062309.XugQH7AH-lkp@intel.com/
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Link: https://lore.kernel.org/r/20231107064545.13120-1-quic_jkona@quicinc.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
When scanning namespaces, it is possible to get valid data from the first
call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second
call in nvme_update_ns_info_block(). In particular, if the NSID becomes
inactive between the two commands, a storage device may return a buffer
filled with zero as per 4.1.5.1. In this case, we can get a kernel crash
due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will
be set to zero.
PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10"
#0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7
#1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa
#2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788
#3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb
#4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce
#5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595
#6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6
#7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926
[exception RIP: blk_stack_limits+434]
RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001
RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core]
#9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core]
This happened when the check for valid data was moved out of nvme_identify_ns()
into one of the callers. Fix this by checking in both callers.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186
Fixes: 0dd6fff2aad4 ("nvme: bring back auto-removal of deleted namespaces during sequential scan")
Cc: stable@vger.kernel.org
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The documented numeric return values do not match the actual returned
values. Fix them by using the enum names instead of raw numbers.
Fixes: b53a2340d0d3 ("of/reconfig: Add of_reconfig_get_state_change() of notifier helper.")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20231123-fix-of_reconfig_get_state_change-docs-v1-1-f51892050ff9@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq fixes for 6.7-rc4 from Viresh Kumar.
These fix issues related to power domains in the qcom cpufreq driver
and an OPP-related issue in the imx6q cpufreq driver.
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
pmdomain: qcom: rpmpd: Set GENPD_FLAG_ACTIVE_WAKEUP
cpufreq: qcom-nvmem: Preserve PM domain votes in system suspend
cpufreq: qcom-nvmem: Enable virtual power domain devices
cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily
|
|
The acpi_video code was storing the acpi_video_device as driver_data
in the acpi_device children of the acpi_video_bus acpi_device.
But the acpi_video driver only binds to the bus acpi_device.
It uses, but does not bind to, the children. Since it is not
the driver it should not be using the driver_data of the children's
acpi_device-s.
Since commit 0d16710146a1 ("ACPI: bus: Set driver_data to NULL every
time .add() fails") the childen's driver_data ends up getting set
to NULL after a driver fails to bind to the children leading to a NULL
pointer deref in video_get_max_state when registering the cooling-dev:
[ 3.148958] BUG: kernel NULL pointer dereference, address: 0000000000000090
<snip>
[ 3.149015] Hardware name: Sony Corporation VPCSB2X9R/VAIO, BIOS R2087H4 06/15/2012
[ 3.149021] RIP: 0010:video_get_max_state+0x17/0x30 [video]
<snip>
[ 3.149105] Call Trace:
[ 3.149110] <TASK>
[ 3.149114] ? __die+0x23/0x70
[ 3.149126] ? page_fault_oops+0x171/0x4e0
[ 3.149137] ? exc_page_fault+0x7f/0x180
[ 3.149147] ? asm_exc_page_fault+0x26/0x30
[ 3.149158] ? video_get_max_state+0x17/0x30 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149176] ? __pfx_video_get_max_state+0x10/0x10 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149192] __thermal_cooling_device_register.part.0+0xf2/0x2f0
[ 3.149205] acpi_video_bus_register_backlight.part.0.isra.0+0x414/0x570 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149227] acpi_video_register_backlight+0x57/0x80 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149245] intel_acpi_video_register+0x68/0x90 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[ 3.149669] intel_display_driver_register+0x28/0x50 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[ 3.150064] i915_driver_probe+0x790/0xb90 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[ 3.150402] local_pci_probe+0x45/0xa0
[ 3.150412] pci_device_probe+0xc1/0x260
<snip>
Fix this by directly using the acpi_video_device as devdata for
the cooling-device, which avoids the need to set driver-data on
the children at all.
Fixes: 0d16710146a1 ("ACPI: bus: Set driver_data to NULL every time .add() fails")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9718
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It's valid to add the same fence multiple times to a dma-resv object and
we shouldn't need one extra slot for each.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: a3f7c10a269d5 ("dma-buf/dma-resv: check if the new fence is really later")
Cc: stable@vger.kernel.org # v5.19+
Link: https://patchwork.freedesktop.org/patch/msgid/20231115093035.1889-1-christian.koenig@amd.com
|
|
In case of error, free the nvme_id_ns structure that was allocated
by nvme_identify_ns().
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Keep-alive commands are sent half-way through the kato period.
This normally works well but fails when the keep-alive system is
started when we are more than half way through the kato.
This can happen on larger setups or due to host delays.
With this change we now time the initial keep-alive command from
the controller initialisation time, rather than the keep-alive
mechanism activation time.
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The driver could possibly sleep while in atomic context resulting
in the following call trace while CONFIG_DEBUG_ATOMIC_SLEEP=y is
set:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2817, name: bash
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Call Trace:
<TASK>
dump_stack_lvl+0x36/0x50
__might_resched+0x123/0x170
mutex_lock+0x1e/0x50
pds_vfio_put_lm_file+0x1e/0xa0 [pds_vfio_pci]
pds_vfio_put_save_file+0x19/0x30 [pds_vfio_pci]
pds_vfio_state_mutex_unlock+0x2e/0x80 [pds_vfio_pci]
pci_reset_function+0x4b/0x70
reset_store+0x5b/0xa0
kernfs_fop_write_iter+0x137/0x1d0
vfs_write+0x2de/0x410
ksys_write+0x5d/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
This can happen if pds_vfio_put_restore_file() and/or
pds_vfio_put_save_file() grab the mutex_lock(&lm_file->lock)
while the spin_lock(&pds_vfio->reset_lock) is held, which can
happen during while calling pds_vfio_state_mutex_unlock().
Fix this by changing the reset_lock to reset_mutex so there are no such
conerns. Also, make sure to destroy the reset_mutex in the driver specific
VFIO device release function.
This also fixes a spinlock bad magic BUG that was caused
by not calling spinlock_init() on the reset_lock. Since, the lock is
being changed to a mutex, make sure to call mutex_init() on it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/kvm/1f9bc27b-3de9-4891-9687-ba2820c1b390@moroto.mountain/
Fixes: bb500dbe2ac6 ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231122192532.25791-3-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The following BUG was found when running on a kernel with
CONFIG_DEBUG_MUTEXES=y set:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
RIP: 0010:mutex_trylock+0x10d/0x120
Call Trace:
<TASK>
? __warn+0x85/0x140
? mutex_trylock+0x10d/0x120
? report_bug+0xfc/0x1e0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? mutex_trylock+0x10d/0x120
? mutex_trylock+0x10d/0x120
pds_vfio_reset+0x3a/0x60 [pds_vfio_pci]
pci_reset_function+0x4b/0x70
reset_store+0x5b/0xa0
kernfs_fop_write_iter+0x137/0x1d0
vfs_write+0x2de/0x410
ksys_write+0x5d/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
As shown, lock->magic != lock. This is because
mutex_init(&pds_vfio->state_mutex) is called in the VFIO open path. So,
if a reset is initiated before the VFIO device is opened the mutex will
have never been initialized. Fix this by calling
mutex_init(&pds_vfio->state_mutex) in the VFIO init path.
Also, don't destroy the mutex on close because the device may
be re-opened, which would cause mutex to be uninitialized. Fix this by
implementing a driver specific vfio_device_ops.release callback that
destroys the mutex before calling vfio_pci_core_release_dev().
Fixes: bb500dbe2ac6 ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231122192532.25791-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
