summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-08-28parisc: led: Rewrite LED/LCD driver to utilizize Linux LED subsystemHelge Deller
Rewrite the whole driver and drop the own code to calculate load average, disk and LAN load. Switch instead to use the in-kernel LED subsystem, which gives us quite some advantages, e.g. - existing triggers for heartbeat and disk/lan activity can be used - users can configre the LEDs at will to any existing trigger via /sys/class/leds - less overhead since we don't need to run own timers - fully integrated in Linux and as such cleaner code. Note that the driver now depends on CONFIG_LEDS_CLASS which has to be built-in and not as module. Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-28of: unittest: Fix of_unittest_pci_node() kconfig dependenciesRob Herring
of_unittest_pci_node test depends on both CONFIG_PCI_DYNAMIC_OF_NODES and CONFIG_OF_OVERLAY. Move the test into the existing CONFIG_OF_OVERLAY ifdef and rework the CONFIG_PCI_DYNAMIC_OF_NODES dependency to use IS_ENABLED() instead. This reduces the combinations to build. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308241954.oRNfVqmB-lkp@intel.com/ Fixes: 26409dd04589 ("of: unittest: Add pci_dt_testdrv pci driver") Cc: Lizhi Hou <lizhi.hou@amd.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230824221743.1581707-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-08-28Merge tag 'nand/for-6.6' into mtd/nextMiquel Raynal
Raw NAND core changes: * Fix -Wvoid-pointer-to-enum-cast warning * Export 'nand_exit_status_op()' * dt-bindings: Fix nand-controller.yaml license Raw NAND controller driver changes: * Omap, Omap2, Samsung, Atmel, fsl_upm, lpc32xx_slc, lpc32xx_mlc, STM32_FMC2, sh_ftlctl, MXC, Sunxi: - Use devm_platform_get_and_ioremap_resource() * Orion, vf610_nfc, Sunxi, STM32_FMC2, MTK, mpc5121, lpc32xx_slc, Intel, FSMC, Arasan: - Use helper function devm_clk_get_optional_enabled() * Brcmnand: - Use devm_platform_ioremap_resource_byname() - Propagate init error -EPROBE_DEFER up - Propagate error and simplify ternary operators - Fix mtd oobsize - Fix potential out-of-bounds access in oob write - Fix crash during the panic_write - Fix potential false time out warning - Fix ECC level field setting for v7.2 controller * fsmc: Handle clk prepare error in fsmc_nand_resume() * Marvell: Add support for AC5 SoC * Meson: - Support for 512B ECC step size - Fix build error - Use NAND core API to check status - dt-bindings: * Make ECC properties dependent * Support for 512B ECC step size * Drop unneeded quotes * Oxnas: Remove driver and bindings * Qcom: - Conversion to ->exec_op() - Removal of the legacy interface - Two full series of improvements/misc fixes * Use the BIT() macro * Use u8 instead of uint8_t * Fix alignment with open parenthesis * Fix the spacing * Fix wrong indentation * Fix a typo * Early structure initialization * Fix address parsing within ->exec_op() * Remove superfluous initialization of "ret" * Rename variables in qcom_op_cmd_mapping() * Handle unsupported opcode in qcom_op_cmd_mapping() * Fix the opcode check in qcom_check_op() * Use EOPNOTSUPP instead of ENOTSUPP * Wrap qcom_nand_exec_op() to 80 columns * Unmap sg_list and free desc within submic_descs() * Simplify the call to nand_prog_page_end_op() * Do not override the error no of submit_descs() * Sort includes alphabetically * Clear buf_count and buf_start in raw read * Add read/read_start ops in exec_op path * vf610_nfc: Do not check 0 for platform_get_irq() SPI-NAND changes: * gigadevice: Add support for GD5F1GQ{4,5}RExxH * esmt: Add support for F50D2G41KA * toshiba: Add support for T{C,H}58NYG{0,2}S3HBAI4 and TH58NYG3S0HBAI6 Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2023-08-28Merge tag 'asoc-v6.6' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v6.6 The rest of the updates for v6.6, some of the highlights include: - A big API cleanup from Morimoto-san, rationalising the places we put functions. - Lots of work on the SOF framework, AMD and Intel drivers, including a lot of cleanup and new device support. - Standardisation of the presentation of jacks from drivers. - Provision of some generic sound card DT properties. - Conversion oof more drivers to the maple tree register cache. - New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43, various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive JH7110.
2023-08-28Merge tag 'opp-updates-6.6' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP updates for 6.6 from Viresh Kumar: "- Minor core cleanup and addition of new frequency related APIs (Viresh Kumar and Manivannan Sadhasivam). - Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)." * tag 'opp-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: cpufreq: Convert ti-cpufreq to json schema dt-bindings: opp: Convert ti-omap5-opp-supply to json schema OPP: Fix argument name in doc comment dt-bindings: opp: Increase maxItems for opp-hz property OPP: Fix passing 0 to PTR_ERR in _opp_attach_genpd() OPP: Fix potential null ptr dereference in dev_pm_opp_get_required_pstate() OPP: Reuse dev_pm_opp_get_freq_indexed() OPP: Update _read_freq() to return the correct frequency OPP: Add dev_pm_opp_find_freq_exact_indexed() OPP: Introduce dev_pm_opp_get_freq_indexed() API OPP: Introduce dev_pm_opp_find_freq_{ceil/floor}_indexed() APIs OPP: Rearrange entries in pm_opp.h
2023-08-28Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge ARM cpufreq updates for 6.6: - Migrate various platforms to use remove callback returning void (Yangtao Li). - Add online/offline/exit hooks for Tegra driver (Sumit Gupta). - Explicitly include correct DT includes (Rob Herring). - Frequency domain updates for qcom-hw driver (Neil Armstrong). - Modify AMD pstate driver return the highest_perf value (Meng Li). - Generic cleanups for cppc, mediatek and powernow driver (Liao Chang, Konrad Dybcio). - Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino Del Regno, Konrad Dybcio). - brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva). * pm-cpufreq: (33 commits) cpufreq: tegra194: remove opp table in exit hook cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit() cpufreq: tegra194: add online/offline hooks cpufreq: qcom-cpufreq-hw: add support for 4 freq domains dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases. cpufreq: Prefer to print cpuid in MIN/MAX QoS register error message cpufreq: amd-pstate-ut: Modify the function to get the highest_perf value cpufreq: mediatek-hw: Remove unused define cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev cpufreq: brcmstb-avs-cpufreq: Fix -Warray-bounds bug cpufreq: blocklist MSM8998 in cpufreq-dt-platdev cpufreq: omap: Convert to platform remove callback returning void cpufreq: qoriq: Convert to platform remove callback returning void cpufreq: acpi: Convert to platform remove callback returning void cpufreq: tegra186: Convert to platform remove callback returning void cpufreq: qcom-nvmem: Convert to platform remove callback returning void cpufreq: kirkwood: Convert to platform remove callback returning void cpufreq: pcc-cpufreq: Convert to platform remove callback returning void ...
2023-08-28Merge tag 'cpufreq-arm-updates-6.6' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq updates for 6.6 from Viresh Kumar: "- Migrate various platforms to use remove callback returning void (Yangtao Li). - Add online/offline/exit hooks for Tegra driver (Sumit Gupta). - Explicitly include correct DT includes (Rob Herring). - Frequency domain updates for qcom-hw driver (Neil Armstrong). - Modify AMD pstate driver return the highest_perf value (Meng Li). - Generic cleanups for cppc, mediatek and powernow driver (Liao Chang and Konrad Dybcio). - Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino Del Regno and Konrad Dybcio). - brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)." * tag 'cpufreq-arm-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (33 commits) cpufreq: tegra194: remove opp table in exit hook cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit() cpufreq: tegra194: add online/offline hooks cpufreq: qcom-cpufreq-hw: add support for 4 freq domains dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases. cpufreq: Prefer to print cpuid in MIN/MAX QoS register error message cpufreq: amd-pstate-ut: Modify the function to get the highest_perf value cpufreq: mediatek-hw: Remove unused define cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev cpufreq: brcmstb-avs-cpufreq: Fix -Warray-bounds bug cpufreq: blocklist MSM8998 in cpufreq-dt-platdev cpufreq: omap: Convert to platform remove callback returning void cpufreq: qoriq: Convert to platform remove callback returning void cpufreq: acpi: Convert to platform remove callback returning void cpufreq: tegra186: Convert to platform remove callback returning void cpufreq: qcom-nvmem: Convert to platform remove callback returning void cpufreq: kirkwood: Convert to platform remove callback returning void cpufreq: pcc-cpufreq: Convert to platform remove callback returning void ...
2023-08-28Merge remote-tracking branch 'linux-efi/urgent' into efi/nextArd Biesheuvel
2023-08-28cpufreq: tegra194: remove opp table in exit hookSumit Gupta
Add exit hook and remove OPP table when the device gets unregistered. This will fix the error messages when the CPU FREQ driver module is removed and then re-inserted. It also fixes these messages while onlining the first CPU from a policy whose all CPU's were previously offlined. debugfs: File 'cpu5' in directory 'opp' already present! debugfs: File 'cpu6' in directory 'opp' already present! debugfs: File 'cpu7' in directory 'opp' already present! Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth") Signed-off-by: Sumit Gupta <sumitg@nvidia.com> [ Viresh: Dropped irrelevant change from it ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-08-28ata: pata_falcon: add data_swab option to byte-swap disk dataMichael Schmitz
Some users of pata_falcon on Q40 have IDE disks in default IDE little endian byte order, whereas legacy disks use host-native big-endian byte order as on the Atari Falcon. Add module parameter 'data_swab' to allow connecting drives with non-native data byte order. Drives selected by the data_swap bit mask will have their user data byte-swapped to host byte order, i.e. 'pata_falcon.data_swab=2' will byte-swap all user data on drive B, leaving data on drive A in native byte order. On Q40, drives on a second IDE interface may be added to the bit mask as bits 2 and 3. Default setting is no byte swapping, i.e. compatibility with the native Falcon or Q40 operating system disk format. Cc: William R Sowerbutts <will@sowerbutts.com> Cc: Finn Thain <fthain@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: William R Sowerbutts <will@sowerbutts.com> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-28ata: pata_falcon: fix IO base selection for Q40Michael Schmitz
With commit 44b1fbc0f5f3 ("m68k/q40: Replace q40ide driver with pata_falcon and falconide"), the Q40 IDE driver was replaced by pata_falcon.c. Both IO and memory resources were defined for the Q40 IDE platform device, but definition of the IDE register addresses was modeled after the Falcon case, both in use of the memory resources and in including register shift and byte vs. word offset in the address. This was correct for the Falcon case, which does not apply any address translation to the register addresses. In the Q40 case, all of device base address, byte access offset and register shift is included in the platform specific ISA access translation (in asm/mm_io.h). As a consequence, such address translation gets applied twice, and register addresses are mangled. Use the device base address from the platform IO resource for Q40 (the IO address translation will then add the correct ISA window base address and byte access offset), with register shift 1. Use MMIO base address and register shift 2 as before for Falcon. Encode PIO_OFFSET into IO port addresses for all registers for Q40 except the data transfer register. Encode the MMIO offset there (pata_falcon_data_xfer() directly uses raw IO with no address translation). Reported-by: William R Sowerbutts <will@sowerbutts.com> Closes: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagVA@mail.gmail.com Link: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagVA@mail.gmail.com Fixes: 44b1fbc0f5f3 ("m68k/q40: Replace q40ide driver with pata_falcon and falconide") Cc: stable@vger.kernel.org Cc: Finn Thain <fthain@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: William R Sowerbutts <will@sowerbutts.com> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-28Merge tag 'irqchip-6.6' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - Fix for Loongsoon eiointc init error handling - Fix a bunch of warning showing up when -Wmissing-prototypes is set - A set of fixes for drivers checking for 0 as a potential return value from platform_get_irq() - Another set of patches converting existing code to the use of helpers such as of_address_count() and devm_platform_get_and_ioremap_resource() - A tree-wide cleanup of drivers including of_*.h without discrimination - Added support for the Amlogic C3 SoCs Link: https://lore.kernel.org/lkml/20230828091543.4001857-1-maz@kernel.org
2023-08-28r8169: fix ASPM-related issues on a number of systems with NIC version from ↵Heiner Kallweit
RTL8168h This effectively reverts 4b5f82f6aaef. On a number of systems ASPM L1 causes tx timeouts with RTL8168h, see referenced bug report. Fixes: 4b5f82f6aaef ("r8169: enable ASPM L1/L1.1 from RTL8168h") Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217814 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28ethernet: tg3: remove unreachable codeMikhail Kobuk
'tp->irq_max' value is either 1 [L16336] or 5 [L16354], as indicated in tg3_get_invariants(). Therefore, 'i' can't exceed 4 in tg3_init_one() that makes (i <= 4) always true. Moreover, 'intmbx' value set at the last iteration is not used later in it's scope. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 78f90dcf184b ("tg3: Move napi_add calls below tg3_get_invariants") Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru> Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28octeontx2-af: print error message incase of invalid pf mappingHariprasad Kelam
During AF driver initialization, it creates a mapping between pf to cgx,lmac pair. Whenever there is a physical link change, using this mapping driver forwards the message to the associated netdev. This patch prints error message incase of cgx,lmac pair is not associated with any pf netdev. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28octeontx2-af: Add validation of lmacHariprasad Kelam
With the addition of new MAC blocks like CN10K RPM and CN10KB RPM_USX, LMACs are noncontiguous. Though in most of the functions, lmac validation checks exist but in few functions they are missing. This patch adds the same. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28octeontx2-af: Don't treat lack of CGX interfaces as errorSunil Goutham
Don't treat lack of CGX LMACs on the system as a error. Instead ignore it so that LBK VFs are created and can be used. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28octeontx2-af: CN10KB: Add USGMII LMAC modeHariprasad Kelam
Upon physical link change, firmware reports to the kernel about the change along with the details like speed, lmac_type_id, etc. Kernel derives lmac_type based on lmac_type_id received from firmware. This patch extends current lmac list with new USGMII mode supported by CN10KB RPM block. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ↵Stuart Hayhurst
ACPI symbol Newer Lenovo laptops seem to use the KBLC symbol to control the backlight Add support for handling the keyboard backlight on these devices Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com> Link: https://lore.kernel.org/r/20230827161940.485200-1-stuart.a.hayhurst@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-28platform/x86/amd/pmc: Fix build error with randconfigShyam Sundar S K
on x86_64: CONFIG_SUSPEND is not set CONFIG_PM is not set this leads to build failure of the AMD PMC driver. Add a 'depends on' in the Kconfig. Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/lkml/5181685c-29d8-22a4-a2d7-682f26e2e031@infradead.org/ Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230826161213.3180194-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-28cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()Liao Chang
Since the 'cpus' field of policy structure will become empty in the cpufreq core API, it is better to use 'related_cpus' in the exit() callback of driver. Fixes: c3274763bfc3 ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly") Signed-off-by: Liao Chang <liaochang1@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-08-28cpufreq: tegra194: add online/offline hooksSumit Gupta
Implement the light-weight tear down and bring up helpers to reduce the amount of work to do on CPU offline/online operation. This change helps to make the hotplugging paths much faster. Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Link: https://lore.kernel.org/lkml/20230816033402.3abmugb5goypvllm@vireshk-i7/ [ Viresh: Fixed rebase conflict ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-08-28igb: set max size RX buffer when store bad packet is enabledRadoslaw Tyl
Increase the RX buffer size to 3K when the SBP bit is on. The size of the RX buffer determines the number of pages allocated which may not be sufficient for receive frames larger than the set MTU size. Cc: stable@vger.kernel.org Fixes: 89eaefb61dc9 ("igb: Support RX-ALL feature flag.") Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-27net/mlx5: Implement devlink port function cmds to control ipsec_packetDima Chumak
Implement devlink port function commands to enable / disable IPsec packet offloads. This is used to control the IPsec capability of the device. When ipsec_offload is enabled for a VF, it prevents adding IPsec packet offloads on the PF, because the two cannot be active simultaneously due to HW constraints. Conversely, if there are any active IPsec packet offloads on the PF, it's not allowed to enable ipsec_packet on a VF, until PF IPsec offloads are cleared. Signed-off-by: Dima Chumak <dchumak@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-9-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-27net/mlx5: Implement devlink port function cmds to control ipsec_cryptoDima Chumak
Implement devlink port function commands to enable / disable IPsec crypto offloads. This is used to control the IPsec capability of the device. When ipsec_crypto is enabled for a VF, it prevents adding IPsec crypto offloads on the PF, because the two cannot be active simultaneously due to HW constraints. Conversely, if there are any active IPsec crypto offloads on the PF, it's not allowed to enable ipsec_crypto on a VF, until PF IPsec offloads are cleared. Signed-off-by: Dima Chumak <dchumak@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-8-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-27net/mlx5: Provide an interface to block change of IPsec capabilitiesLeon Romanovsky
mlx5 HW can't perform IPsec offload operation simultaneously both on PF and VFs at the same time. While the previous patches added devlink knobs to change IPsec capabilities dynamically, there is a need to add a logic to block such IPsec capabilities for the cases when IPsec is already configured. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-7-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-27net/mlx5e: Rewrite IPsec vs. TC block interfaceLeon Romanovsky
In the commit 366e46242b8e ("net/mlx5e: Make IPsec offload work together with eswitch and TC"), new API to block IPsec vs. TC creation was introduced. Internally, that API used devlink lock to avoid races with userspace, but it is not really needed as dev->priv.eswitch is stable and can't be changed. So remove dependency on devlink lock and move block encap code back to its original place. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-5-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-27net/mlx5: Drop extra layer of locks in IPsecLeon Romanovsky
There is no need in holding devlink lock as it gives nothing compared to already used write mode_lock. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-4-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small driver fixes and one larger unused function set removal in the raid class (so no external impact)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: snic: Fix double free in snic_tgt_create() scsi: core: raid_class: Remove raid_component_add() scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5 scsi: ufs: mcq: Fix the search/wrap around logic
2023-08-27Merge tag 'usb-serial-6.6-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 6.6-rc1 Here are the USB-serial updates for 6.6-rc1, including: - support for the RS485 mode of XR devices - new modem device ids All have been in linux-next with no reported issues. * tag 'usb-serial-6.6-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add FOXCONN T99W368/T99W373 product USB: serial: option: add Quectel EM05G variant (0x030e) USB: serial: xr: add TIOCGRS485 and TIOCSRS485 ioctls
2023-08-27tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()Jiri Slaby (SUSE)
The code is duplicated to perform the copy twice -- to handle buffer wrap-around. Instead of the duplication, roll this into the loop. (And add some blank lines around to have the code a bit more readable.) Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-15-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: extract ECHO_OP processing to a separate functionJiri Slaby (SUSE)
__process_echoes() contains ECHO_OPs processing. It is stuffed in a while loop and the whole function is barely readable. Separate it to a new function: n_tty_process_echo_ops(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-14-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: unify counts to size_tJiri Slaby (SUSE)
Some count types are already 'size_t' for a long time. Some were switched to 'size_t' recently. Unify the rest with those now. This allows for some min_t()s to become min()s. And make one min() an explicit min_t() as we are comparing signed 'room' to unsigned 'count'. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-13-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: use u8 for chars and flagsJiri Slaby (SUSE)
Unify with the tty layer and use u8 for both chars and flags. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-12-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: simplify chars_in_buffer()Jiri Slaby (SUSE)
The 'if' in chars_in_buffer() is misleadingly inverted. And since the only difference is the head used for computation, cache the head using ternary operator. And use that in return directly. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: remove unsigned char casts from character constantsJiri Slaby (SUSE)
We compile with -funsigned-char, so all character constants are already unsigned chars. Therefore, remove superfluous casts. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-10-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: move newline handling to a separate functionJiri Slaby (SUSE)
Currently, n_tty handles the newline in a label in n_tty_receive_char_canon(). That is invoked from two more places. Split this code to a separate function and avoid the label in this case. This makes the code flow more understandable. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-9-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: move canon handling to a separate functionJiri Slaby (SUSE)
n_tty_receive_char_special() is already complicated enough. Split the canon handling to a separate function: n_tty_receive_char_canon(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-8-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: use MASK() for masking out size bitsJiri Slaby (SUSE)
In n_tty, there is already a macro to mask out top bits from ring buffer counters. It is MASK() added some time ago. So use it more in the code to make it more readable. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-7-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: make n_tty_data::num_overrun unsignedJiri Slaby (SUSE)
n_tty_data::num_overrun is unlikely to overflow in a second. But make it explicitly unsigned to avoid printing negative values. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-6-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()Jiri Slaby (SUSE)
The jiffies tests in n_tty_receive_overrun() are simplified ratelimiting (without locking). We could use struct ratelimit_state and the helpers, but to me, it occurs to be too complex for this use case. But the code currently tests both if the time passed (the first time_after()) and if jiffies wrapped around (the second time_after()). time_is_before_jiffies() takes care of both, provided overrun_time is initialized at the allocation time. So switch to time_is_before_jiffies(), the same what ratelimiting does. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-5-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: use 'num' for writes' countsJiri Slaby (SUSE)
We have a separate misnomer 'c' to hold the retuned value from tty->ops->write(). Instead, use 'num' already defined on another place (and already properly typed). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: use output character directlyJiri Slaby (SUSE)
There is no point to use a local variable to store the character when we can pass it directly. This assignment comes from era when we used to do get_user(c, b). We no longer need this, so fix this. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: make flow of n_tty_receive_buf_common() a boolJiri Slaby (SUSE)
The 'flow' parameter of n_tty_receive_buf_common() is meant to be a boolean value. So use bool and alter call sites accordingly. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-2-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27Revert "tty: serial: meson: Add a earlycon for the T7 SoC"Lucas Tanure
This reverts commit 6a4197f9763325043abf7690a21124a9facbf52e New SoC will use ttyS0 instead of ttyAML, so T7 SoC doesn't need a OF_EARLYCON_DECLARE. Fixes: 6a4197f97633 ("tty: serial: meson: Add a earlycon for the T7 SoC") Signed-off-by: Lucas Tanure <tanure@linux.com> Link: https://lore.kernel.org/r/20230827082944.5100-1-tanure@linux.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27parisc: lasi: Initialize LASI driver via arch_initcall()Helge Deller
Move initialization code for LASI out of the GSC driver. Since ASP and WAX have been moved in previous commits, the GSC driver is now just a driver which provides library functions for LASI, ASP and WAX and as such doesn't need an own initialization function any longer. Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: asp: Initialize asp driver via arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: wax: Initialize wax driver via arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: iosapic: Convert I/O Sapic driver to use arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-27parisc: sba_iommu: Convert SBA IOMMU driver to use arch_initcall()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
generated by cgit (git 2.34.1) at 2025-09-16 11:55:51 +0000