| Age | Commit message (Collapse) | Author |
|---|
|
There are several places where we can crash the kernel by requesting
lines, unbinding the GPIO device, then calling any of the system calls
relevant to the GPIO character device's annonymous file descriptors:
ioctl(), read(), poll().
While I observed it with the GPIO simulator, it will also happen for any
of the GPIO devices that can be hot-unplugged - for instance any HID GPIO
expander (e.g. CP2112).
This affects both v1 and v2 uAPI.
This fixes it partially by checking if gdev->chip is not NULL but it
doesn't entirely remedy the situation as we still have a race condition
in which another thread can remove the device after the check.
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Fixes: 7b8e00d98168 ("gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-12-05 (i40e)
Michal clears XPS init flag on reset to allow for updated values to be
written.
Sylwester adds sleep to VF reset to resolve issue of VFs not getting
resources.
Przemyslaw rejects filters for raw IPv4 or IPv6 l4_4_bytes filters as they
are not supported.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Disallow ip4 and ip6 l4_4_bytes
i40e: Fix for VF MAC address 0
i40e: Fix not setting default xps_cpus after reset
====================
Link: https://lore.kernel.org/r/20221205212523.3197565-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds reset parameter to mtk_wed_rx_ring_setup signature
in order to align rx_ring_setup callback to tx_ring_setup one introduced
in 'commit 23dca7a90017 ("net: ethernet: mtk_wed: add reset to
tx_ring_setup callback")'
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/29c6e7a5469e784406cf3e2920351d1207713d05.1670239984.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Semicolons after "}" are not needed.
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/202212051422158113766@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/202212051021451139126@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When dsa_devlink_region_create failed in sja1105_setup_devlink_regions(),
priv->regions is not released.
Fixes: bf425b82059e ("net: dsa: sja1105: expose static config as devlink region")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205012132.2110979-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
q6v5_wcss_qcs404_power_on()
q6v5_wcss_qcs404_power_on() have no fail path for readl_poll_timeout().
Add fail path for readl_poll_timeout().
Fixes: 0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204082757.18850-1-shangxiaojing@huawei.com
|
|
adsp_alloc_memory_region()
The pointer node is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221203070639.15128-1-yuancan@huawei.com
|
|
Prior to the Fixes: commit, the initialization code went through the
same fec_enet_set_coalesce() function as used by ethtool, and that
function correctly checks whether the current variant has support for
irq coalescing.
Now that the initialization code instead calls fec_enet_itr_coal_set()
directly, that call needs to be guarded by a check for the
FEC_QUIRK_HAS_COALESCE bit.
Fixes: df727d4547de (net: fec: don't reset irq coalesce settings to defaults on "ip link up")
Reported-by: Greg Ungerer <gregungerer@westnet.com.au>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205204604.869853-1-linux@rasmusvillemoes.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit 4d633d1b468b ("bonding: fix ICMPv6 header handling when receiving
IPv6 messages"), there is a copy/paste issue for NA daddr. I found that
in my testing and fixed it in my local branch. But I forgot to re-format
the patch and sent the wrong mail.
Fix it by reading the correct dest address.
Fixes: 4d633d1b468b ("bonding: fix ICMPv6 header handling when receiving IPv6 messages")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20221206032055.7517-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to detach from the power domains also on remove, not just on
probe fail so a subsequent probe works as expected.
Otherwise the following error appears on re-probe:
[ 29.452005] sysfs: cannot create duplicate filename '/devices/genpd:0:3000000.remoteproc'
[ 29.477121] CPU: 1 PID: 483 Comm: sh Tainted: G W 6.1.0-rc4-00075-g71a113770bda #78
[ 29.510319] Hardware name: Fairphone 4 (DT)
[ 29.538335] Call trace:
[ 29.564470] dump_backtrace.part.0+0xe0/0xf0
[ 29.592602] show_stack+0x18/0x30
[ 29.619616] dump_stack_lvl+0x64/0x80
[ 29.646834] dump_stack+0x18/0x34
[ 29.673541] sysfs_warn_dup+0x60/0x7c
[ 29.700592] sysfs_create_dir_ns+0xec/0x110
[ 29.728057] kobject_add_internal+0xb8/0x374
[ 29.755530] kobject_add+0x9c/0x104
[ 29.782072] device_add+0xbc/0x8a0
[ 29.808445] device_register+0x20/0x30
[ 29.835175] genpd_dev_pm_attach_by_id+0xa4/0x190
[ 29.862851] genpd_dev_pm_attach_by_name+0x3c/0xb0
[ 29.890472] dev_pm_domain_attach_by_name+0x20/0x30
[ 29.918212] adsp_probe+0x278/0x580
[ 29.944384] platform_probe+0x68/0xc0
[ 29.970603] really_probe+0xbc/0x2dc
[ 29.996662] __driver_probe_device+0x78/0xe0
[ 30.023491] device_driver_attach+0x48/0xac
[ 30.050215] bind_store+0xb8/0x114
[ 30.075957] drv_attr_store+0x24/0x3c
[ 30.101874] sysfs_kf_write+0x44/0x54
[ 30.127751] kernfs_fop_write_iter+0x120/0x1f0
[ 30.154448] vfs_write+0x1ac/0x380
[ 30.179937] ksys_write+0x70/0x104
[ 30.205274] __arm64_sys_write+0x1c/0x2c
[ 30.231060] invoke_syscall+0x48/0x114
[ 30.256594] el0_svc_common.constprop.0+0x44/0xec
[ 30.283183] do_el0_svc+0x2c/0xd0
[ 30.308320] el0_svc+0x2c/0x84
[ 30.333059] el0t_64_sync_handler+0xf4/0x120
[ 30.359001] el0t_64_sync+0x18c/0x190
[ 30.384385] kobject_add_internal failed for genpd:0:3000000.remoteproc with -EEXIST, don't try to register things with the same name in the same directory.
[ 30.406029] remoteproc remoteproc0: releasing 3000000.remoteproc
[ 30.416064] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains")
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118090816.100012-2-luca.weiss@fairphone.com
|
|
Leaving wakeup enabled during probe fail (-EPROBE_DEFER) or remove makes
the subsequent probe fail.
[ 3.749454] remoteproc remoteproc0: releasing 3000000.remoteproc
[ 3.752949] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17
[ 3.878935] remoteproc remoteproc0: releasing 4080000.remoteproc
[ 3.887602] qcom_q6v5_pas: probe of 4080000.remoteproc failed with error -17
[ 4.319552] remoteproc remoteproc0: releasing 8300000.remoteproc
[ 4.332716] qcom_q6v5_pas: probe of 8300000.remoteproc failed with error -17
Fix this by disabling wakeup in both cases so the driver can properly
probe on the next try.
Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
Fixes: dc86c129b4fb ("remoteproc: qcom: pas: Mark devices as wakeup capable")
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118090816.100012-1-luca.weiss@fairphone.com
|
|
q6v5_wcss_init_mmio() will call platform_get_resource_byname() that may
fail and return NULL. devm_ioremap() will use res->start as input, which
may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref.
Fixes: 0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221125021641.29392-1-shangxiaojing@huawei.com
|
|
The kfree() should be called when of_irq_get_byname() fails or
devm_request_threaded_irq() fails in qcom_add_sysmon_subdev(),
otherwise there will be a memory leak, so add kfree() to fix it.
Fixes: 027045a6e2b7 ("remoteproc: qcom: Add shutdown-ack irq")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221129105650.1539187-1-cuigaosheng1@huawei.com
|
|
Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct
qmi_elem_info") allows QMI message encoding/decoding rules to be
const, so do that for sysmon.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220914234705.28405-3-quic_jjohnson@quicinc.com
|
|
We currently have some complicated code in sfp_probe() which gets the
I2C bus depending on whether the sfp node is DT or ACPI, and we use
completely separate lookup functions.
This could do with being in a separate function to make the code more
readable, so move it to a new function, sfp_i2c_get(). We can also use
fwnode_find_reference() to lookup the I2C bus fwnode before then
decending into fwnode-type specific parsing.
A future cleanup would be to move the fwnode-type specific parsing into
the i2c layer, which is where it really should be.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1p1WGJ-0098wS-4w@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When booting a arm 32-bit kernel with config CONFIG_AHCI_DWC enabled on
a am57xx-evm board. This happens when the clock references are unnamed
in DT, the strcmp() produces a NULL pointer dereference, see the
following oops, NULL pointer dereference:
[ 4.673950] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 4.682098] [00000000] *pgd=00000000
[ 4.685699] Internal error: Oops: 5 [#1] SMP ARM
[ 4.690338] Modules linked in:
[ 4.693420] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc7 #1
[ 4.699615] Hardware name: Generic DRA74X (Flattened Device Tree)
[ 4.705749] PC is at strcmp+0x0/0x34
[ 4.709350] LR is at ahci_platform_find_clk+0x3c/0x5c
[ 4.714416] pc : [<c130c494>] lr : [<c0c230e0>] psr: 20000013
[ 4.720703] sp : f000dda8 ip : 00000001 fp : c29b1840
[ 4.725952] r10: 00000020 r9 : c1b23380 r8 : c1b23368
[ 4.731201] r7 : c1ab4cc4 r6 : 00000001 r5 : c3c66040 r4 : 00000000
[ 4.737762] r3 : 00000080 r2 : 00000080 r1 : c1ab4cc4 r0 : 00000000
[...]
[ 4.998870] strcmp from ahci_platform_find_clk+0x3c/0x5c
[ 5.004302] ahci_platform_find_clk from ahci_dwc_probe+0x1f0/0x54c
[ 5.010589] ahci_dwc_probe from platform_probe+0x64/0xc0
[ 5.016021] platform_probe from really_probe+0xe8/0x41c
[ 5.021362] really_probe from __driver_probe_device+0xa4/0x204
[ 5.027313] __driver_probe_device from driver_probe_device+0x38/0xc8
[ 5.033782] driver_probe_device from __driver_attach+0xb4/0x1ec
[ 5.039825] __driver_attach from bus_for_each_dev+0x78/0xb8
[ 5.045532] bus_for_each_dev from bus_add_driver+0x17c/0x220
[ 5.051300] bus_add_driver from driver_register+0x90/0x124
[ 5.056915] driver_register from do_one_initcall+0x48/0x1e8
[ 5.062591] do_one_initcall from kernel_init_freeable+0x1cc/0x234
[ 5.068817] kernel_init_freeable from kernel_init+0x20/0x13c
[ 5.074584] kernel_init from ret_from_fork+0x14/0x2c
[ 5.079681] Exception stack(0xf000dfb0 to 0xf000dff8)
[ 5.084747] dfa0: 00000000 00000000 00000000 00000000
[ 5.092956] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.101165] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 5.107818] Code: e5e32001 e3520000 1afffffb e12fff1e (e4d03001)
[ 5.114013] ---[ end trace 0000000000000000 ]---
Add an extra check in the if-statement if hpriv-clks[i].id.
Fixes: 6ce73f3a6fc0 ("ata: libahci_platform: Add function returning a clock-handle by id")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
There are fields 'last_hwmon_state' and 'last_thermal_state' in the
structure 'emc2305_cdev_data', which respectively store the cooling state
set by the 'hwmon' and 'thermal' subsystem, and the driver author hopes
that if the state set by 'hwmon' is lower than the value set by 'thermal',
the driver will just save it without actually setting the pwm. Currently,
the 'last_thermal_state' also be updated by 'hwmon', which will cause the
cooling state to never be set to a lower value. This patch fixes that.
Signed-off-by: Xingjiang Qiao <nanpuyue@gmail.com>
Link: https://lore.kernel.org/r/20221206055331.170459-2-nanpuyue@gmail.com
Fixes: 0d8400c5a2ce1 ("hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.")
[groeck: renamed emc2305_set_cur_state_shim -> __emc2305_set_cur_state]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
readl() already handles endian conversion. That's the main difference
between readl() and __raw_readl(). This is benign on little-endian
systems, but big endian systems will end up byte-swabbing twice.
Fixes: 2905cb5236cb ("cxl/pci: Add (hopeful) error handling support")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030092025.4045167.10651070153523351093.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The first argument to the CXL AER trace points is the source device.
Pass a 'const struct device *' rather than a 'const char *' for more
type precision / safety.
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030091477.4045167.15174636482098463885.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The definitions of 'EMC2305_REG_PRODUCT_ID' and 'EMC2305_REG_DEVICE' are
both '0xfd', they actually return the same value, but the values returned
by emc2301/2/3/5 are different, so probe emc2301/2/3 will fail, This patch
fixes that.
Signed-off-by: Xingjiang Qiao <nanpuyue@gmail.com>
Link: https://lore.kernel.org/r/20221206055331.170459-1-nanpuyue@gmail.com
Fixes: 0d8400c5a2ce1 ("hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
CXL PMEM security operations are routed through the NVDIMM sysfs
interface. For this reason the corresponding commands are marked
"exclusive" to preclude collisions between the ioctl ABI and the sysfs
ABI. However, a better way to preclude that collision is to simply
remove the ioctl ABI (command-id definitions) for those operations.
Now that cxl_internal_send_cmd() (formerly cxl_mbox_send_cmd()) no
longer needs to talk the cxl_mem_commands array, all of the uapi
definitions for the security commands can be dropped.
These never appeared in a released kernel, so no regression risk.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030056464.4044561.11486507095384253833.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_internal_send_cmd() skips output size validation for variable output
commands which is not ideal. Most of the time internal usages want to
fail if the output size does not match what was requested. For other
commands where the caller cannot predict the size there is usually a
a header that conveys how much vaild data is in the payload. For those
cases add @min_out as a parameter to specify what the minimum response
payload needs to be for the caller to parse the rest of the payload.
In this patch only Get Supported Logs has that behavior, but going
forward records retrieval commands like Get Poison List and Get Event
Records can use @min_out to retrieve a variable amount of records.
Critically, this validation scheme skips the needs to interrogate the
cxl_mem_commands array which in turn frees up the implementation to
support internal command enabling without also enabling external / user
commands.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030055918.4044561.10339573829837910505.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Internally cxl_mbox_send_cmd() converts all passed-in parameters to a
'struct cxl_mbox_cmd' instance and sends that to cxlds->mbox_send(). It
then teases the possibilty that the caller can validate the output size.
However, they cannot since the resulting output size is not conveyed to
the called. Fix that by making the caller pass in a constructed 'struct
cxl_mbox_cmd'. This prepares for a future patch to add output size
validation on a per-command basis.
Given the change in signature, also change the name to differentiate it
from the user command submission path that performs more validation
before generating the 'struct cxl_mbox_cmd' instance to execute.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030055370.4044561.17788093375112783036.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Multi-byte integer values in CXL mailbox payloads are little endian. Add
a definition of the Get Security State output payload and convert the
value before testing flags.
Fixes: 328281155539 ("cxl/pmem: Introduce nvdimm_security_ops with ->get_flags() operation")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167030054822.4044561.4917796262037689553.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
"linux,initrd-start" and "linux,initrd-end" can be 32-bit values even on
a 64-bit platform. Ideally, the size should be based on
'#address-cells', but that has never been enforced in the kernel's FDT
boot parsing code (early_init_dt_check_for_initrd()). Bootloader
behavior is known to vary. For example, kexec always writes these as
64-bit. The result of incorrectly reading 32-bit values is most likely
the reserved memory for the original initrd will still be reserved
for the new kernel. The original arm64 equivalent of this code failed to
release the initrd reserved memory in *all* cases.
Use of_read_number() to mirror the early_init_dt_check_for_initrd()
code.
Fixes: b30be4dc733e ("of: Add a common kexec FDT setup function")
Cc: stable@vger.kernel.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Link: https://lore.kernel.org/r/20221128202440.1411895-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In struct i2c_driver, field new_probe replaces the soon to be deprecated
field probe. Update unittest for this change. The probe function
doesn't make use of the i2c_device_id * parameter so it can be trivially
converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20221118224540.619276-510-uwe@kleine-koenig.org
[robh: Add Frank's commit msg addition]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Now that we have everything to support the PRE_COPY state,
enable it.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20221123113236.896-5-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Instead of waiting till data transfer is complete to perform dev
compatibility, do it as soon as we have enough data to perform the
check. This will be useful when we enable the support for PRE_COPY.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20221123113236.896-4-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The saving_migf is open in PRE_COPY state if it is supported and reads
initial device match data. hisi_acc_vf_stop_copy() is refactored to
make use of common code.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20221123113236.896-3-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
PRECOPY IOCTL in the case of HiSiIicon ACC driver can be used to
perform the device compatibility check earlier during migration.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20221123113236.896-2-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Now that everything has been set up for MIGRATION_PRE_COPY, enable it.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-15-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Before a SAVE command is issued, a QUERY command is issued in order to
know the device data size.
In case PRE_COPY is used, the above commands are issued while the device
is running. Thus, it is possible that between the QUERY and the SAVE
commands the state of the device will be changed significantly and thus
the SAVE will fail.
Currently, if a SAVE command is failing, the driver will fail the
migration. In the above case, don't fail the migration, but don't allow
for new SAVEs to be executed while the device is in a RUNNING state.
Once the device will be moved to STOP_COPY, SAVE can be executed again
and the full device state will be read.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-14-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In order to support PRE_COPY, mlx5 driver transfers multiple states
(images) of the device. e.g.: the source VF can save and transfer
multiple states, and the target VF will load them by that order.
This patch implements the changes for the target VF to decompose the
header for each state and to write and load multiple states.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-13-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
During PRE_COPY the migration data FD may have a temporary "end of
stream" that is reached when the initial_bytes were read and no other
dirty data exists yet.
For instance, this may indicate that the device is idle and not
currently dirtying any internal state. When read() is done on this
temporary end of stream the kernel driver should return ENOMSG from
read(). Userspace can wait for more data or consider moving to
STOP_COPY.
To not block the user upon read() and let it get ENOMSG we add a new
state named MLX5_MIGF_STATE_PRE_COPY on the migration file.
In addition, we add the MLX5_MIGF_STATE_SAVE_LAST state to block the
read() once we call the last SAVE upon moving to STOP_COPY.
Any further error will be marked with MLX5_MIGF_STATE_ERROR and the user
won't be blocked.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-12-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
vfio precopy ioctl returns an estimation of data available for
transferring from the device.
Whenever a user is using VFIO_MIG_GET_PRECOPY_INFO, track the current
state of the device, and if needed, append the dirty data to the
transfer FD data. This is done by saving a middle state.
As mlx5 runs the SAVE command asynchronously, make sure to query for
incremental data only once there is no active save command.
Running both in parallel, might end-up with a failure in the incremental
query command on un-tracked vhca.
Also, a middle state will be saved only after the previous state has
finished its SAVE command and has been fully transferred, this prevents
endless use resources.
Co-developed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-11-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
As mentioned in the previous patches, mlx5 is transferring multiple
states when the PRE_COPY protocol is used. This states mechanism
requires the target VM to know the states' size in order to execute
multiple loads. Therefore, add SW header, with the needed information,
for each saved state the source VM is transferring to the target VM.
This patch implements the source VM handling of the headers, following
patch will implement the target VM handling of the headers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-10-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In order to support PRE_COPY, mlx5 driver is transferring multiple
states (images) of the device. e.g.: the source VF can save and transfer
multiple states, and the target VF will load them by that order.
The device is saving three kinds of states:
1) Initial state - when the device moves to PRE_COPY state.
2) Middle state - during PRE_COPY phase via VFIO_MIG_GET_PRECOPY_INFO.
There can be multiple states of this type.
3) Final state - when the device moves to STOP_COPY state.
After moving to PRE_COPY state, user is holding the saving migf FD and
can use it. For example: user can start transferring data via read()
callback. Also, user can switch from PRE_COPY to STOP_COPY whenever he
sees it fits. This will invoke saving of final state.
This means that mlx5 VFIO device can be switched to STOP_COPY without
transferring any data in PRE_COPY state. Therefore, when the device
moves to STOP_COPY, mlx5 will store the final state on a dedicated queue
entry on the list.
Co-developed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-9-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Refactor to use queue based data chunks on the migration file.
The SAVE command adds a chunk to the tail of the queue while the read()
API finds the required chunk and returns its data.
In case the queue is empty but the state of the migration file is
MLX5_MIGF_STATE_COMPLETE, read() may not be blocked but will return 0 to
indicate end of file.
This is a step towards maintaining multiple images and their meta data
(i.e. headers) on the migration file as part of next patches from the
series.
Note:
At that point, we still use a single chunk on the migration file but
becomes ready to support multiple.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-8-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Refactor migration file state to be an emum which is mutual exclusive.
As of that dropped the 'disabled' state as 'error' is the same from
functional point of view.
Next patches from the series will extend this enum for other relevant
states.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-7-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This patch refactors MKEY usage such as its life cycle will be as of the
migration file instead of allocating/destroying it upon each
SAVE/LOAD command.
This is a preparation step towards the PRE_COPY series where multiple
images will be SAVED/LOADED.
We achieve it by having a new struct named mlx5_vhca_data_buffer which
holds the mkey and its related stuff as of sg_append_table,
allocated_length, etc.
The above fields were taken out from the migration file main struct,
into mlx5_vhca_data_buffer dedicated struct with the proper helpers in
place.
For now we have a single mlx5_vhca_data_buffer per migration file.
However, in coming patches we'll have multiple of them to support
multiple images.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-6-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This patch refactors PD usage such as its life cycle will be as of the
migration file instead of allocating/destroying it upon each SAVE/LOAD
command.
This is a preparation step towards the PRE_COPY series where multiple
images will be SAVED/LOADED and a single PD can be simply reused.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Enforce a single SAVE command at a time.
As the SAVE command is an asynchronous one, we must enforce running only
a single command at a time.
This will preserve ordering between multiple calls and protect from
races on the migration file data structure.
This is a must for the next patches from the series where as part of
PRE_COPY we may have multiple images to be saved and multiple SAVE
commands may be issued from different flows.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The optional PRE_COPY states open the saving data transfer FD before
reaching STOP_COPY and allows the device to dirty track internal state
changes with the general idea to reduce the volume of data transferred
in the STOP_COPY stage.
While in PRE_COPY the device remains RUNNING, but the saving FD is open.
Only if the device also supports RUNNING_P2P can it support PRE_COPY_P2P,
which halts P2P transfers while continuing the saving FD.
PRE_COPY, with P2P support, requires the driver to implement 7 new arcs
and exists as an optional FSM branch between RUNNING and STOP_COPY:
RUNNING -> PRE_COPY -> PRE_COPY_P2P -> STOP_COPY
A new ioctl VFIO_MIG_GET_PRECOPY_INFO is provided to allow userspace to
query the progress of the precopy operation in the driver with the idea it
will judge to move to STOP_COPY at least once the initial data set is
transferred, and possibly after the dirty size has shrunk appropriately.
This ioctl is valid only in PRE_COPY states and kernel driver should
return -EINVAL from any other migration state.
Compared to the v1 clarification, STOP_COPY -> PRE_COPY is blocked
and to be defined in future.
We also split the pending_bytes report into the initial and sustaining
values, e.g.: initial_bytes and dirty_bytes.
initial_bytes: Amount of initial precopy data.
dirty_bytes: Device state changes relative to data previously retrieved.
These fields are not required to have any bearing to STOP_COPY phase.
It is recommended to leave PRE_COPY for STOP_COPY only after the
initial_bytes field reaches zero. Leaving PRE_COPY earlier might make
things slower.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The IPA core clock is required for SM6350. Define it.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
[elder@linaro.org: rebased with Dmitry's changes]
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202221240.225720-1-elder@linaro.org
|
|
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names. Use parent_hws where possible to refer parent
clocks directly, skipping the lookup.
Note, the system names for xo clocks were changed from "xo" to
"xo_board" to follow the example of other platforms. This switches the
clocks to use DT-provided "xo_board" clock instead of manually
registered "xo" clock and allows us to drop qcom_cc_register_board_clk()
call from the driver at some point.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-9-dmitry.baryshkov@linaro.org
|
|
Move clock parent tables down, after the PLL declarataions, so that we
can use pll hw clock fields in the next commit.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-8-dmitry.baryshkov@linaro.org
|
|
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-7-dmitry.baryshkov@linaro.org
|
|
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names. Use parent_hws where possible to refer parent
clocks directly, skipping the lookup.
Note, the system names for xo clocks were changed from "xo" to
"xo_board" to follow the example of other platforms. This switches the
clocks to use DT-provided "xo_board" clock instead of manually
registered "xo" clock and allows us to drop qcom_cc_register_board_clk()
call from the driver at some point.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-6-dmitry.baryshkov@linaro.org
|
|
Rearrage clock parent tables and PLL declarations (pull parents down
and gpll4 up), so that we can use pll hw clock fields in the next
commit.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-5-dmitry.baryshkov@linaro.org
|
