| Age | Commit message (Collapse) | Author |
|---|
|
The callback `.ndo_set_rx_mode` is called in atomic context, sleep
is not allowed in the implementation. Now use workqueue mechanism
to avoid this issue.
Fixes: de6248644966 ("nfp: add support for multicast filter")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221220152100.1042774-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, the
pathc did not report correctly the csum_level for encapsulated packet.
This patch fixes this issue by reporting correct csum level for the
encapsulated packet.
Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Peng Li <lpeng@vmware.com>
Link: https://lore.kernel.org/r/20221220202556.24421-1-doshir@vmware.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multicast packets received on an interface bound to a VRF are marked as
belonging to the VRF and the skb device is updated to point to the VRF
device itself. This was fine even when a route was associated to a
device as when performing a fib table lookup 'oif' in fib6_table_lookup
(coming from 'skb->dev->ifindex' in ip6_route_input) was set to 0 when
FLOWI_FLAG_SKIP_NH_OIF was set.
With commit 40867d74c374 ("net: Add l3mdev index to flow struct and
avoid oif reset for port devices") this is not longer true and multicast
traffic is not received on the original interface.
Instead of adding back a similar check in fib6_table_lookup determine
the dst using the original ifindex for multicast VRF traffic. To make
things consistent across the function do the above for all strict
packets, which was the logic before commit 6f12fa775530 ("vrf: mark skb
for multicast or link-local as enslaved to VRF"). Note that reverting to
this behavior should be fine as the change was about marking packets
belonging to the VRF, not about their dst.
Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221220171825.1172237-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously ice XDP xmit routine was changed in a way that it avoids
xdp_buff->xdp_frame conversion as it is simply not needed for handling
XDP_TX action and what is more it saves us CPU cycles. This routine is
re-used on ZC driver to handle XDP_TX action.
Although for XDP_TX on Rx ZC xdp_buff that comes from xsk_buff_pool is
converted to xdp_frame, xdp_frame itself is not stored inside
ice_tx_buf, we only store raw data pointer. Casting this pointer to
xdp_frame and calling against it xdp_return_frame in
ice_clean_xdp_tx_buf() results in undefined behavior.
To fix this, simply call page_frag_free() on tx_buf->raw_buf.
Later intention is to remove the buff->frame conversion in order to
simplify the codebase and improve XDP_TX performance on ZC.
Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Reported-and-tested-by: Robin Cowley <robin.cowley@thehutgroup.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@.intel.com>
Link: https://lore.kernel.org/r/20221220175448.693999-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.2
First set of fixes for v6.2. Fix for a link error in mt76, fix for an
iwlwifi firmware crash and two cleanups.
* tag 'wireless-2022-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: ath9k: use proper statements in conditionals
wifi: mt76: mt7996: select CONFIG_RELAY
wifi: iwlwifi: fw: skip PPAG for JF
wifi: ti: remove obsolete lines in the Makefile
====================
Link: https://lore.kernel.org/r/20221221180808.96A8AC433EF@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Various fixes for BFQ (Yu, Yuwei)
- Fix for loop command line parsing (Isaac)
- No need to specifically clear REQ_ALLOC_CACHE on IOPOLL downgrade
anymore (me)
- blk-iocost enum fix for newer gcc (Jiri)
- UAF fix for queue release (Ming)
- blk-iolatency error handling memory leak fix (Tejun)
* tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux:
block: don't clear REQ_ALLOC_CACHE for non-polled requests
block: fix use-after-free of q->q_usage_counter
block, bfq: only do counting of pending-request for BFQ_GROUP_IOSCHED
blk-iolatency: Fix memory leak on add_disk() failures
loop: Fix the max_loop commandline argument treatment when it is set to 0
block/blk-iocost (gcc13): keep large values in a new enum
block, bfq: replace 0/1 with false/true in bic apis
block, bfq: don't return bfqg from __bfq_bic_change_cgroup()
block, bfq: fix possible uaf for 'bfqq->bic'
|
|
That function consumes the reference.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: aab9cf7b6954 ("drm/amdgpu: use scheduler dependencies for VM updates")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable VCN Dynamic Power Gating control for GC IP v11.0.4.
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0, 6.1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- Four potential NULL pointers dereferences (Bastien Nocera, Enrik
Berkhan, Jiasheng Jiang and Roderick Colenbrander)
- Allow Wacom devices in bootloader mode to be flashed (Jason Gerecke)
- Some assorted devices quirks (José Expósito and Terry Junge)
* tag 'for-linus-2022122101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: sony: Fix unused function warning
HID: plantronics: Additional PIDs for double volume key presses quirk
HID: multitouch: fix Asus ExpertBook P2 P2451FA trackpoint
HID: Ignore HP Envy x360 eu0009nv stylus battery
HID: wacom: Ensure bootloader PID is usable in hidraw mode
HID: amd_sfh: Add missing check for dma_alloc_coherent
HID: playstation: fix free of uninialized pointer for DS4 in Bluetooth.
HID: mcp2221: don't connect hidraw
HID: logitech-hidpp: Guard FF init code against non-USB devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- A regression at V4L2 core breaking string controls
- Build warning fixes on sun6i drivers when building with clang
* tag 'media/v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: sun6i-isp: params: Unregister pending buffer on cleanup
media: sun6i-isp: params: Fix incorrect indentation
media: sun6i-isp: capture: Fix uninitialized variable use
media: sun6i-isp: proc: Declare subdev ops as static
media: sun6i-isp: proc: Error out on invalid port to fix warning
media: sun6i-isp: proc: Fix return code handling in stream off path
media: sun8i-a83t-mipi-csi2: Clarify return code handling in stream off path
media: sun6i-mipi-csi2: Clarify return code handling in stream off path
media: sun6i-csi: capture: Remove useless ret initialization
media: sun6i-csi: bridge: Error out on invalid port to fix warning
media: v4l2-ctrls-api.c: add back dropped ctrl->is_new = 1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various changes across the board, mostly improvements and cleanups"
* tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (42 commits)
pwm: pca9685: Convert to i2c's .probe_new()
pwm: sun4i: Propagate errors in .get_state() to the caller
pwm: Handle .get_state() failures
pwm: sprd: Propagate errors in .get_state() to the caller
pwm: rockchip: Propagate errors in .get_state() to the caller
pwm: mtk-disp: Propagate errors in .get_state() to the caller
pwm: imx27: Propagate errors in .get_state() to the caller
pwm: cros-ec: Propagate errors in .get_state() to the caller
pwm: crc: Propagate errors in .get_state() to the caller
leds: qcom-lpg: Propagate errors in .get_state() to the caller
drm/bridge: ti-sn65dsi86: Propagate errors in .get_state() to the caller
pwm/tracing: Also record trace events for failed API calls
pwm: Make .get_state() callback return an error code
pwm: pxa: Enable for MMP platform
pwm: pxa: Add reference manual link and limitations
pwm: pxa: Use abrupt shutdown mode
pwm: pxa: Remove clk enable/disable from pxa_pwm_config
pwm: pxa: Set duty cycle to 0 when disabling PWM
pwm: pxa: Remove pxa_pwm_enable/disable
pwm: mediatek: Add support for MT7986
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with
and attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled"
* tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: sysmon: Make QMI message rules const
drivers: remoteproc: Add Xilinx r5 remoteproc driver
firmware: xilinx: Add RPU configuration APIs
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
remoteproc: core: Use device_match_of_node()
remoteproc: imx_rproc: Correct i.MX93 DRAM mapping
remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
remoteproc: imx_rproc: Request mbox channel later
remoteproc: imx_rproc: Support i.MX8QM
remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- qcom: enable sc8280xp, sm8550 and sm4250 support
- ti: default to ARCH_K3 for msg manager
- mediatek:
- add mt8188 and mt8186 support
- request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
* tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550
mailbox: mtk-cmdq: Do not request irq until we are ready
mailbox: zynq-ipi: fix error handling while device_register() fails
mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying
mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name
dt-bindings: mailbox: add GCE header file for mt8188
mailbox: mpfs: read the system controller's status
mailbox: mtk-cmdq: add MT8186 support
mailbox: mtk-cmdq: add gce ddr enable support flow
mailbox: mtk-cmdq: add gce software ddr enable private data
mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number
mailbox: rockchip: Use device_get_match_data() to simplify the code
dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible
mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager
mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support
dt-bindings: mailbox: qcom: Add SM4250 APCS compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight update from Lee Jones:
"Convert a bunch of I2C class drivers over to .probe_new()"
* tag 'backlight-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: tosa: Convert to i2c's .probe_new()
backlight: lv5207lp: Convert to i2c's .probe_new()
backlight: lp855x: Convert to i2c's .probe_new()
backlight: lm3639: Convert to i2c's .probe_new()
backlight: lm3630a: Convert to i2c's .probe_new()
backlight: bd6107: Convert to i2c's .probe_new()
backlight: arcxcnn: Convert to i2c's .probe_new()
backlight: adp8870: Convert to i2c's .probe_new()
backlight: adp8860: Convert to i2c's .probe_new()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC
New Functionality:
- Add support for multiple devices of the same type; rk808
Fix-ups:
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*
Bug Fixes:
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008"
* tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits)
dt-bindings: mfd: da9062: Correct file name for watchdog
mfd: pm8008: Fix return value check in pm8008_probe()
mfd: rohm: Use dev_err_probe()
mfd: Drop obsolete dependencies on COMPILE_TEST
dt-bindings: mfd: da9062: Move IRQ to optional properties
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource()
mfd: rohm-bd9576: Convert to i2c's .probe_new()
mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource()
dt-bindings: Fix maintainer email for a few ROHM ICs
mfd: palmas: Use device_get_match_data() to simplify the code
Input: Add tps65219 interrupt driven powerbutton
mfd: tps65219: Add driver for TI TPS65219 PMIC
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
mfd: wcd934x: Convert irq chip to config regs
mfd: tps65090: Replace irqchip mask_invert with unmask_base
mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base
mfd: stpmic1: Fix swapped mask/unmask in irq chip
mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, netfilter and can.
Current release - regressions:
- bpf: synchronize dispatcher update with bpf_dispatcher_xdp_func
- rxrpc:
- fix security setting propagation
- fix null-deref in rxrpc_unuse_local()
- fix switched parameters in peer tracing
Current release - new code bugs:
- rxrpc:
- fix I/O thread startup getting skipped
- fix locking issues in rxrpc_put_peer_locked()
- fix I/O thread stop
- fix uninitialised variable in rxperf server
- fix the return value of rxrpc_new_incoming_call()
- microchip: vcap: fix initialization of value and mask
- nfp: fix unaligned io read of capabilities word
Previous releases - regressions:
- stop in-kernel socket users from corrupting socket's task_frag
- stream: purge sk_error_queue in sk_stream_kill_queues()
- openvswitch: fix flow lookup to use unmasked key
- dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port()
- devlink:
- hold region lock when flushing snapshots
- protect devlink dump by the instance lock
Previous releases - always broken:
- bpf:
- prevent leak of lsm program after failed attach
- resolve fext program type when checking map compatibility
- skbuff: account for tail adjustment during pull operations
- macsec: fix net device access prior to holding a lock
- bonding: switch back when high prio link up
- netfilter: flowtable: really fix NAT IPv6 offload
- enetc: avoid buffer leaks on xdp_do_redirect() failure
- unix: fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()
- dsa: microchip: remove IRQF_TRIGGER_FALLING in
request_threaded_irq"
* tag 'net-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
net: fec: check the return value of build_skb()
net: simplify sk_page_frag
Treewide: Stop corrupting socket's task_frag
net: Introduce sk_use_task_frag in struct sock.
mctp: Remove device type check at unregister
net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq
can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len
can: flexcan: avoid unbalanced pm_runtime_enable warning
Documentation: devlink: add missing toc entry for etas_es58x devlink doc
mctp: serial: Fix starting value for frame check sequence
nfp: fix unaligned io read of capabilities word
net: stream: purge sk_error_queue in sk_stream_kill_queues()
myri10ge: Fix an error handling path in myri10ge_probe()
net: microchip: vcap: Fix initialization of value and mask
rxrpc: Fix the return value of rxrpc_new_incoming_call()
rxrpc: rxperf: Fix uninitialised variable
rxrpc: Fix I/O thread stop
rxrpc: Fix switched parameters in peer tracing
rxrpc: Fix locking issues in rxrpc_put_peer_locked()
rxrpc: Fix I/O thread startup getting skipped
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"Two remaining changes that are now possible after you merged a few
other trees:
- #include <asm/archrandom.h> can be removed from random.h now,
making the direct use of the arch_random_* API more of a private
implementation detail between the archs and random.c, rather than
something for general consumers.
- Two additional uses of prandom_u32_max() snuck in during the
initial phase of pulls, so these have been converted to
get_random_u32_below(), and now the deprecated prandom_u32_max()
alias -- which was just a wrapper around get_random_u32_below() --
can be removed.
In addition, there is one fix:
- Check efi_rt_services_supported() before attempting to use an EFI
runtime function.
This affected EFI systems that disable runtime services yet still
boot via EFI (e.g. the reporter's Lenovo Thinkpad X13s laptop), as
well systems where EFI runtime services have been forcibly
disabled, such as on PREEMPT_RT.
On those machines, a very early and hard to diagnose crash would
happen, preventing boot"
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove prandom_u32_max()
efi: random: fix NULL-deref when refreshing seed
random: do not include <asm/archrandom.h> from random.h
|
|
panfrost_gem_create_with_handle() previously returned a BO but with the
only reference being from the handle, which user space could in theory
guess and release, causing a use-after-free. Additionally if the call to
panfrost_gem_mapping_get() in panfrost_ioctl_create_bo() failed then
a(nother) reference on the BO was dropped.
The _create_with_handle() is a problematic pattern, so ditch it and
instead create the handle in panfrost_ioctl_create_bo(). If the call to
panfrost_gem_mapping_get() fails then this means that user space has
indeed gone behind our back and freed the handle. In which case just
return an error code.
Reported-by: Rob Clark <robdclark@chromium.org>
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219140130.410578-1-steven.price@arm.com
|
|
The size allocated out of the dma pool is at most NVME_CTRL_PAGE_SIZE,
which may be smaller than the PAGE_SIZE.
Fixes: c61b82c7b7134 ("nvme-pci: fix PRP pool size")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Convert the max size to bytes to match the units of the divisor that
calculates the worst-case number of PRP entries.
The result is used to determine how many PRP Lists are required. The
code was previously rounding this to 1 list, but we can require 2 in the
worst case. In that scenario, the driver would corrupt memory beyond the
size provided by the mempool.
While unlikely to occur (you'd need a 4MB in exactly 127 phys segments
on a queue that doesn't support SGLs), this memory corruption has been
observed by kfence.
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: 943e942e6266f ("nvme-pci: limit max IO size and segments to avoid high order allocations")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When using shadow doorbells, the event index and the doorbell values are
written to host memory. Prior to this patch, the values written would
erroneously be written in host endianness. This causes trouble on
big-endian platforms. Fix this by adding missing endian conversions.
This issue was noticed by Guenter while testing various big-endian
platforms under QEMU[1]. A similar fix required for hw/nvme in QEMU is
up for review as well[2].
[1]: https://lore.kernel.org/qemu-devel/20221209110022.GA3396194@roeck-us.net/
[2]: https://lore.kernel.org/qemu-devel/20221212114409.34972-4-its@irrelevant.dk/
Fixes: f9f38e33389c ("nvme: improve performance for virtual NVMe devices")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The build_skb might return a null pointer but there is no check on the
return value in the fec_enet_rx_queue(). So a null pointer dereference
might occur. To avoid this, we check the return value of build_skb. If
the return value is a null pointer, the driver will recycle the page and
update the statistic of ndev. Then jump to rx_processing_done to clear
the status flags of the BD so that the hardware can recycle the BD.
Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Shenwei Wang <Shenwei.wang@nxp.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20221219022755.1047573-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MES is part of gfxoff and MES suspend and resume are skipped for S0i3.
But the mes_self_test call path is still in the amdgpu_device_ip_late_init.
it's should also be skipped for s0ix as no hardware re-initialization
happened.
Besides, mes_self_test will free the BO that triggers a lot of warning
messages while in the suspend state.
[ 81.656085] WARNING: CPU: 2 PID: 1550 at drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:425 amdgpu_bo_free_kernel+0xfc/0x110 [amdgpu]
[ 81.679435] Call Trace:
[ 81.679726] <TASK>
[ 81.679981] amdgpu_mes_remove_hw_queue+0x17a/0x230 [amdgpu]
[ 81.680857] amdgpu_mes_self_test+0x390/0x430 [amdgpu]
[ 81.681665] mes_v11_0_late_init+0x37/0x50 [amdgpu]
[ 81.682423] amdgpu_device_ip_late_init+0x53/0x280 [amdgpu]
[ 81.683257] amdgpu_device_resume+0xae/0x2a0 [amdgpu]
[ 81.684043] amdgpu_pmops_resume+0x37/0x70 [amdgpu]
[ 81.684818] pci_pm_resume+0x5c/0xa0
[ 81.685247] ? pci_pm_thaw+0x90/0x90
[ 81.685658] dpm_run_callback+0x4e/0x160
[ 81.686110] device_resume+0xad/0x210
[ 81.686529] async_resume+0x1e/0x40
[ 81.686931] async_run_entry_fn+0x33/0x120
[ 81.687405] process_one_work+0x21d/0x3f0
[ 81.687869] worker_thread+0x4a/0x3c0
[ 81.688293] ? process_one_work+0x3f0/0x3f0
[ 81.688777] kthread+0xff/0x130
[ 81.689157] ? kthread_complete_and_exit+0x20/0x20
[ 81.689707] ret_from_fork+0x22/0x30
[ 81.690118] </TASK>
[ 81.690380] ---[ end trace 0000000000000000 ]---
v2: make the comment clean and use adev->in_s0ix instead of
adev->suspend
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0, 6.1
|
|
For SMU 13.0.0 and 13.0.7, the output from PMFW is in percent. Driver
need to convert that into correct PMW(255) based.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0, 6.1
|
|
To fit the latest PMFW and suppress the warning emerged on driver loading.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0, 6.1
|
|
It's also part of gfxoff.
Cc: stable@vger.kernel.org # 6.0, 6.1
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The activity_monitor_external[] array is too big to fit on the
kernel stack, resulting in this warning with clang:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_7_ppt.c:1438:12: error: stack frame size (1040) exceeds limit (1024) in 'smu_v13_0_7_get_power_profile_mode' [-Werror,-Wframe-larger-than]
Use dynamic allocation instead. It should also be possible to
have single element here instead of the array, but this seems
easier.
v2: fix up argument to sizeof() (Alex)
Fixes: 334682ae8151 ("drm/amd/pm: enable workload type change on smu_v13_0_7")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If kfd_process_device_init_vm returns failure after vm is converted to
compute vm and vm->pasid set to compute pasid, KFD will not take
pdd->drm_file reference. As a result, drm close file handler maybe
called to release the compute pasid before KFD process destroy worker to
release the same pasid and set vm->pasid to zero, this generates below
WARNING backtrace and NULL pointer access.
Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step
of kfd_process_device_init_vm, to ensure vm pasid is the original pasid
if acquiring vm failed or is the compute pasid with pdd->drm_file
reference taken to avoid double release same pasid.
amdgpu: Failed to create process VM object
ida_free called for id=32770 which is not allocated.
WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140
RIP: 0010:ida_free+0x96/0x140
Call Trace:
amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
drm_file_free.part.13+0x216/0x270 [drm]
drm_close_helper.isra.14+0x60/0x70 [drm]
drm_release+0x6e/0xf0 [drm]
__fput+0xcc/0x280
____fput+0xe/0x20
task_work_run+0x96/0xc0
do_exit+0x3d0/0xc10
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:ida_free+0x76/0x140
Call Trace:
amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
drm_file_free.part.13+0x216/0x270 [drm]
drm_close_helper.isra.14+0x60/0x70 [drm]
drm_release+0x6e/0xf0 [drm]
__fput+0xcc/0x280
____fput+0xe/0x20
task_work_run+0x96/0xc0
do_exit+0x3d0/0xc10
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Should only destroy the ib_mem and let process cleanup worker to free
the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid
NULL pointer access in process destroy worker.
BUG: kernel NULL pointer dereference, address: 0000000000000010
Call Trace:
amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu]
kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu]
kfd_process_destroy_pdds+0x71/0x190 [amdgpu]
kfd_process_wq_release+0x2a2/0x3b0 [amdgpu]
process_one_work+0x2a1/0x600
worker_thread+0x39/0x3d0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"This is mostly a treewide clean-up from Krzysztof. There's also a
couple of fixes and things that fell thru the cracks.
I must say this has been a nice merge window without bindings dumped
in at the last minute introducing warnings.
Summary:
- Treewide dropping of redundant 'binding' or 'schema' from schema
titles. This will be followed up with a automated check to catch
these.
- Re-sort vendor-prefies
- Convert GPIO based watchdog to schema
- Handle all the variations for clocks, resets, power domains in i.MX
PCIe binding
- Document missing 'power-domains' property in mxsfb
- Fix error with path references in Tegra XUSB example
- Honor CONFIG_CMDLINE* even without /chosen node"
* tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: drop redundant part of title (manual)
dt-bindings: clock: drop redundant part of title
dt-bindings: drop redundant part of title (beginning)
dt-bindings: drop redundant part of title (end, part three)
dt-bindings: drop redundant part of title (end, part two)
dt-bindings: drop redundant part of title (end)
dt-bindings: clock: st,stm32mp1-rcc: add proper title
dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title
dt-bindings: drop redundant part of title of shared bindings
dt-bindings: watchdog: gpio: Convert bindings to YAML
dt-bindings: imx6q-pcie: Handle more resets on legacy platforms
dt-bindings: imx6q-pcie: Handle various PD configurations
dt-bindings: imx6q-pcie: Handle various clock configurations
dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers
dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property
dt-bindings: vendor-prefixes: sort entries alphabetically
dt-bindings: usb: tegra-xusb: Remove path references
of: fdt: Honor CONFIG_CMDLINE* even without /chosen node
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"There is one noteable patch, which allows the parisc kernel to use the
same MADV_xxx constants as the other architectures going forward. With
that change only alpha has one entry left (MADV_DONTNEED is 6 vs 4 on
others) which is different. To prevent an ABI breakage, a wrapper is
included which translates old MADV values to the new ones, so existing
userspace isn't affected. Reason for that patch is, that some
applications wrongly used the standard MADV_xxx values even on some
non-x86 platforms and as such those programs failed to run correctly
on parisc (examples are qemu-user, tor browser and boringssl).
Then the kgdb console and the LED code received some fixes, and some
0-day warnings are now gone. Finally, the very last compile warning
which was visible during a kernel build is now fixed too (in the vDSO
code).
The majority of the patches are tagged for stable series and in
summary this patchset is quite small and drops more code than it adds:
Fixes:
- Fix potential null-ptr-deref in start_task()
- Fix kgdb console on serial port
- Add missing FORCE prerequisites in Makefile
- Drop PMD_SHIFT from calculation in pgtable.h
Enhancements:
- Implement a wrapper to align madvise() MADV_* constants with other
architectures
- If machine supports running MPE/XL, show the MPE model string
Cleanups:
- Drop duplicate kgdb console code
- Indenting fixes in setup_cmdline()"
* tag 'parisc-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Show MPE/iX model string at bootup
parisc: Add missing FORCE prerequisites in Makefile
parisc: Move pdc_result struct to firmware.c
parisc: Drop locking in pdc console code
parisc: Drop duplicate kgdb_pdc console
parisc: Fix locking in pdc_iodc_print() firmware call
parisc: Drop PMD_SHIFT from calculation in pgtable.h
parisc: Align parisc MADV_XXX constants with all other architectures
parisc: led: Fix potential null-ptr-deref in start_task()
parisc: Fix inconsistent indenting in setup_cmdline()
|
|
Compiling this driver without setting "CONFIG_SONY_FF" generates the
following warning:
drivers/hid/hid-sony.c:2358:20: warning: unused function
'sony_send_output_report' [-Wunused-function]
static inline void sony_send_output_report(struct sony_sc *sc)
^
1 warning generated.
Add the missing preprocessor check to fix it.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
I no longer work for Plantronics (aka Poly, aka HP) and do not have
access to the headsets in order to test. However, as noted by Maxim,
the other 32xx models that share the same base code set as the 3220
would need the same quirk. This patch adds the PIDs for the rest of
the Blackwire 32XX product family that require the quirk.
Plantronics Blackwire 3210 Series (047f:c055)
Plantronics Blackwire 3215 Series (047f:c057)
Plantronics Blackwire 3225 Series (047f:c058)
Quote from previous patch by Maxim Mikityanskiy
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
End quote
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The HID descriptor of this device contains two mouse collections, one
for mouse emulation and the other for the trackpoint.
Both collections get merged and, because the first one defines X and Y,
the movemenent events reported by the trackpoint collection are
ignored.
Set the MT_CLS_WIN_8_FORCE_MULTI_INPUT class for this device to be able
to receive its reports.
This fix is similar to/based on commit 40d5bb87377a ("HID: multitouch:
enable multi-input as a quirk for some devices").
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/825
Reported-by: Akito <the@akito.ooo>
Tested-by: Akito <the@akito.ooo>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Battery status is reported for the HP Envy x360 eu0009nv stylus even
though it does not have battery.
Prevent it from always reporting the battery as low (1%).
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/823
Reported-by: Ioannis Iliopoulos <jxftw2424@gmail.com>
Tested-by: Ioannis Iliopoulos <jxftw2424@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Some Wacom devices have a special "bootloader" mode that is used for
firmware flashing. When operating in this mode, the device cannot be
used for input, and the HID descriptor is not able to be processed by
the driver. The driver generates an "Unknown device_type" warning and
then returns an error code from wacom_probe(). This is a problem because
userspace still needs to be able to interact with the device via hidraw
to perform the firmware flash.
This commit adds a non-generic device definition for 056a:0094 which
is used when devices are in "bootloader" mode. It marks the devices
with a special BOOTLOADER type that is recognized by wacom_probe() and
wacom_raw_event(). When we see this type we ensure a hidraw device is
created and otherwise keep our hands off so that userspace is in full
control.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
A previous cleanup patch accidentally broke some conditional
expressions by replacing the safe "do {} while (0)" constructs
with empty macros. gcc points this out when extra warnings
are enabled:
drivers/net/wireless/ath/ath9k/hif_usb.c: In function 'ath9k_skb_queue_complete':
drivers/net/wireless/ath/ath9k/hif_usb.c:251:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
251 | TX_STAT_INC(hif_dev, skb_failed);
Make both sets of macros proper expressions again.
Fixes: d7fc76039b74 ("ath9k: htc: clean up statistics macros")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221215165553.1950307-1-arnd@kernel.org
|
|
Without CONFIG_RELAY, the driver fails to link:
ERROR: modpost: "relay_flush" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined!
ERROR: modpost: "relay_switch_subbuf" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined!
ERROR: modpost: "relay_open" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined!
ERROR: modpost: "relay_reset" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined!
ERROR: modpost: "relay_file_operations" [drivers/net/wireless/mediatek/mt76/mt7996/mt7996e.ko] undefined!
The same change was done in mt7915 for the corresponding copy of the code.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
See-also: 988845c9361a ("mt76: mt7915: add support for passing chip/firmware debug data to user space")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221215163133.4152299-1-arnd@kernel.org
|
|
For JF RFs we don't support PPAG, but many firmware
images lie about it. Always skip support for JF to
avoid firmware errors when sending the command.
Reported-and-tested-by: Íñigo Huguet <ihuguet@redhat.com>
Link: https://lore.kernel.org/linux-wireless/CACT4oufQsqHGp6bah2c4+jPn2wG1oZqY=UKa_TmPx=F6Lxng8Q@mail.gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221213225723.2a43415d8990.I9ac210740a45b41f1b2e15274e1daf4284f2808a@changeid
|
|
Add check for the return value of the dma_alloc_coherent since
it may return NULL pointer if allocation fails.
Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221220024921.21992-1-jiasheng@iscas.ac.cn
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Documentation fixe (Matt, Miaoqian)
- OA-perf related fix (Umesh)
- VLV/CHV HDMI/DP audio fix (Ville)
- Display DDI/Transcoder fix (Khaled)
- Migrate fixes (Chris, Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y5uFYOJ/1jgf2eSE@intel.com
|
|
Do not try to refresh the RNG seed in case the firmware does not support
setting variables.
This is specifically needed to prevent a NULL-pointer dereference on the
Lenovo X13s with some firmware revisions, or more generally, whenever
the runtime services have been disabled (e.g. efi=noruntime or with
PREEMPT_RT).
Fixes: e7b813b32a42 ("efi: random: refresh non-volatile random seed when RNG is initialized")
Reported-by: Steev Klimaszewski <steev@kali.org>
Reported-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The <asm/archrandom.h> header is a random.c private detail, not
something to be called by other code. As such, don't make it
automatically available by way of random.h.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-12-19
The first patch is by Vincent Mailhol and adds the etas_es58x
devlink documentation to the index.
Haibo Chen's patch for the flexcan driver fixes a unbalanced
pm_runtime_enable warning.
The last patch is by me, targets the kvaser_usb driver and fixes
an error occurring with gcc-13.
* tag 'linux-can-fixes-for-6.2-20221219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len
can: flexcan: avoid unbalanced pm_runtime_enable warning
Documentation: devlink: add missing toc entry for etas_es58x devlink doc
====================
Link: https://lore.kernel.org/r/20221219155210.1143439-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag. The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.
The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code. I believe this problem to
be much more pervasive than reports to the community may indicate.
Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false. Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.
CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ swithes used interrupts for detecting the phy link up and down.
During registering the interrupt handler, it used IRQF_TRIGGER_FALLING
flag. But this flag has to be retrieved from device tree instead of hard
coding in the driver, so removing the flag.
Fixes: ff319a644829 ("net: dsa: microchip: move interrupt handling logic from lan937x to ksz_common")
Reported-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20221213101440.24667-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of build fixes from randconfig testing, plus a set
of Mediatek SoC specific fixes, all trivial"
* tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: tegra: fix CPU_BIG_ENDIAN dependencies
ARM: disallow pre-ARMv5 builds with ld.lld
ARM: pxa: fix building with clang
MAINTAINERS: add related dts to IXP4xx
ARM: dts: spear: drop 0x from unit address
arm64: dts: mt8183: Fix Mali GPU clock
arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon
soc: mediatek: pm-domains: Fix the power glitch issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support zstd-compressed debug info
- Allow W=1 builds to detect objects shared among multiple modules
- Add srcrpm-pkg target to generate a source RPM package
- Make the -s option detection work for future GNU Make versions
- Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y
- Allow W=1 builds to detect -Wundef warnings in any preprocessed files
- Raise the minimum supported version of binutils to 2.25
- Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used
- Use $(file ...) to read a file if GNU Make >= 4.2 is used
- Print error if GNU Make older than 3.82 is used
- Allow modpost to detect section mismatches with Clang LTO
- Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y
* tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
buildtar: fix tarballs with EFI_ZBOOT enabled
modpost: Include '.text.*' in TEXT_SECTIONS
padata: Mark padata_work_init() as __ref
kbuild: ensure Make >= 3.82 is used
kbuild: refactor the prerequisites of the modpost rule
kbuild: change module.order to list *.o instead of *.ko
kbuild: use .NOTINTERMEDIATE for future GNU Make versions
kconfig: refactor Makefile to reduce process forks
kbuild: add read-file macro
kbuild: do not sort after reading modules.order
kbuild: add test-{ge,gt,le,lt} macros
Documentation: raise minimum supported version of binutils to 2.25
kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds
kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS
kbuild: Port silent mode detection to future gnu make.
init/version.c: remove #include <generated/utsrelease.h>
firmware_loader: remove #include <generated/utsrelease.h>
modpost: Mark uuid_le type to be suitable only for MEI
kbuild: add ability to make source rpm buildable using koji
kbuild: warn objects shared among multiple modules
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/fixes
PM domains: enable isolation before resetting power
* tag 'v6.1-soc-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: pm-domains: Fix the power glitch issue
Link: https://lore.kernel.org/r/29c8b913-53cf-096f-fe44-832ceaeac116@suse.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
My previous patch to prevent BPMP from being enabled on big
endian kernels caused a build regression:
WARNING: unmet direct dependencies detected for TEGRA_BPMP
Depends on [n]: ARCH_TEGRA [=y] && TEGRA_HSP_MBOX [=y] && TEGRA_IVC [=y] && !CPU_BIG_ENDIAN [=y]
Selected by [y]:
- ARCH_TEGRA_186_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
- ARCH_TEGRA_194_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
- ARCH_TEGRA_234_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
Add even more such dependencies for the SoC types that use
the BPMP driver.
Fixes: 4ddb1bf1a837 ("tegra: mark BPMP driver as little-endian only")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221215165336.1781080-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
