| Age | Commit message (Collapse) | Author |
|---|
|
HIDPP unifying is only checked once in probe() and it is also
set by probe() itself.
Drop the quirk and replace its one check by the condition which is
used to set the quirk in the first place.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-13-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Drop delayed_work_cb() instead make hidpp_connect_event() the workqueue
function itself.
Besides resulting in a small cleanup this will hopefully also make
it clearer that going forward hidpp_connect_event() should only
be run from a workqueue and not be directly invoked.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-12-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
There is a connect event race in hidpp_probe() in these 2 lines:
connected = hidpp_root_get_protocol_version(hidpp) == 0;
atomic_set(&hidpp->connected, connected);
Specifically the following can happen:
1. This line from hidpp_probe() is executed:
connected = hidpp_root_get_protocol_version(hidpp) == 0;
and sets connected to false;
2. A connect-event packet is received and does:
atomic_set(&hidpp->connected, true);
3. The next line from hidpp_probe() is executed:
atomic_set(&hidpp->connected, connected);
and sets the atomic_t back to 0 again.
4. hidpp_connect_event() runs and sees the connected device
as disconnected because of this.
To fix this make hidpp_connect_event() query the connection status
of the device itself instead of having it rely on possibly stale
data cached in struct hidpp_device.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-11-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Remove the unused connected function parameter from wtp_connect(),
m560_send_config_command() and k400_connect().
This is a preparation patch for moving all connected state handling
to hidpp_connect_event().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-10-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Non-unifying devices (USB, Bluetooth) are always connected during
probe(), remove the unnecessary connected check.
This is a preparation patch for moving all connected state handling
to hidpp_connect_event().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-9-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Turn hidpp_overwrite_name() into a hidpp_non_unifying_init() helper
which takes care of setting both the name and the serial for non
unifying devices.
This mirrors the hidpp_unifying_init() helper for unifying devices.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-8-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Move the hidpp_overwrite_name() call to before the connect check, this
puts it at the same place in the probe() order as hidpp_serial_init()
which seems more logical. This should not make a difference since this
is in the non-unifying path and only unifying devices can be probed
in non-connected state.
This is a preparation patch for moving all connected state handling
to hidpp_connect_event().
Doing this before the connect check requires dropping the protocol
version check since protocol_major is not set yet now. Instead
this relies on hidpp_root_get_feature(HIDPP_PAGE_GET_DEVICE_NAME_TYPE)
failing on older devices, just like how hidpp_get_serial() relies on
hidpp_root_get_feature(HIDPP_PAGE_DEVICE_INFORMATION) failing on older
devices. So this again makes the code more consistent.
Also stop printing an error on failure now, since with the proto
version check gone failures are expected to happen on older devices.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-7-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The data retrieved by g920_get_config() is only used by hidpp_ff_init().
Now that the hw is kept open till the end of probe() the g920_get_config()
call can be moved to just before hidpp_ff_init() to have all
the HIDPP_QUIRK_CLASS_G920 together in a single place.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-6-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
For WTP devices which start disconnected (paired with the unifying
receiver, but not connected atm) hidpp_connect_event() takes care
of calling wtp_get_config() when the device later connects.
There is no need to have a separate code path for WTP devices which
are connected at probe() time, these can use the same code-path since
probe() will queue hidpp_connect_event() for those at probe time.
Drop the unnecessary wtp_get_config() call from probe().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-5-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
hidpp_connect_event()
Calling get_wireless_feature_index() from probe() causes
the wireless_feature_index to only get set for unifying devices which
are already connected at probe() time. It does not get set for devices
which connect later.
Fix this by moving get_wireless_feature_index() to hidpp_connect_event(),
this does not make a difference for devices connected at probe() since
probe() will queue the hidpp_connect_event() for those at probe time.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 0da0a63b7cba ("HID: logitech-hidpp: Support WirelessDeviceStatus connect events")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-4-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Commit 91cf9a98ae41 ("HID: logitech-hidpp: make .probe usbhid capable")
makes hidpp_probe() first call hid_hw_start(hdev, 0) to allow IO
without connecting any hid subdrivers (hid-input, hidraw).
This is done to allow to retrieve the device's name and serial number
and store these in hdev->name and hdev->uniq.
Then later on IO was stopped and started again with hid_hw_start(hdev,
HID_CONNECT_DEFAULT) connecting hid-input and hidraw after the name
and serial number have been setup.
Commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
if not necessary") changed the probe() code to only do the start with
a 0 connect-mask + restart later for unifying devices.
But for non unifying devices hdev->name and hdev->uniq are updated too.
So this change re-introduces the problem for which the start with
a 0 connect-mask + restart later behavior was introduced.
The previous patch in this series changes the unifying path to instead of
restarting IO only call hid_connect() later. This avoids possible issues
with restarting IO seen on non unifying devices.
Revert the change to limit the restart behavior to unifying devices to
fix hdev->name changing after userspace facing devices have already been
registered.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-3-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Restarting IO causes 2 problems:
1. Some devices do not like IO being restarted this was addressed in
commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
if not necessary"), but that change has issues of its own and needs to
be reverted.
2. Restarting IO and specifically calling hid_device_io_stop() causes
received packets to be missed, which may cause connect-events to
get missed.
Restarting IO was introduced in commit 91cf9a98ae41 ("HID: logitech-hidpp:
make .probe usbhid capable") to allow to retrieve the device's name and
serial number and store these in hdev->name and hdev->uniq before
connecting any hid subdrivers (hid-input, hidraw) exporting this info
to userspace.
But this does not require restarting IO, this merely requires deferring
calling hid_connect(). Calling hid_hw_start() with a connect-mask of
0 makes it skip calling hid_connect(), so hidpp_probe() can simply call
hid_connect() later without needing to restart IO.
Remove the stop + restart of IO and instead just call hid_connect() later
to avoid the issues caused by restarting IO.
Now that IO is no longer stopped, hid_hw_close() must be called at the end
of probe() to balance the hid_hw_open() done at the beginning probe().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Suggested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-2-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be
compiled, protecting against bitrot.
The linker will then garbage-collect the unused function avoiding any overhead.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231012-hid-pm_ptr-v1-4-0a71531ca93b@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be
compiled, protecting against bitrot.
The linker will then garbage-collect the unused function avoiding any overhead.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231012-hid-pm_ptr-v1-3-0a71531ca93b@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be
compiled, protecting against bitrot.
The linker will then garbage-collect the unused function avoiding any overhead.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231012-hid-pm_ptr-v1-2-0a71531ca93b@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The USB Compact Keyboard variant requires a reset_resume function to
restore keyboard configuration after a suspend in some situations. Move
configuration normally done on probe to lenovo_features_set_cptkbd(), then
recycle this for use on reset_resume.
Without, the keyboard and driver would end up in an inconsistent state,
breaking middle-button scrolling amongst other problems, and twiddling
sysfs values wouldn't help as the middle-button mode won't be set until
the driver is reloaded.
Tested on a USB and Bluetooth Thinkpad Compact Keyboard.
CC: stable@vger.kernel.org
Fixes: 94eefa271323 ("HID: lenovo: Use native middle-button mode for compact keyboards")
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Link: https://lore.kernel.org/r/20231002150914.22101-1-martink@posteo.de
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This reverts commit c61c255e114c52682546447ed44d3470b5708134.
The pasid_set_wpe() helper, which was removed by the reverted commit,
is still used by the nesting translation support in the iommufd tree.
To avoid a merge conflict, revert the commit.
Link: https://lore.kernel.org/linux-kernel/20231025153455.283c5b12@canb.auug.org.au/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231025131854.375388-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The superhyway bus driver was only referenced on SH4-202, which is now gone,
so remove it all as well.
I could find no trace of anything ever calling superhyway_register_driver(),
not in the git history but also not on the web, so I assume this has never
served any purpose on mainline kernels.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230914155523.3839811-3-arnd@kernel.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
This board was an early prototype platform for early SH4 CPUs and related
to the already removed SH5 cayman platform.
The microdev board itself has been kept in the tree for this long despite
being in a bad shape even 20 years ago when it got merged, with no working
PCI support and ugly workarounds for its I/O port implementation that
try to emulate PC style peripheral access despite being quite different
in reality.
As far as I can tell, the ethernet, display, USB and PCI devices on it
already broke at some point (afbb9d8d5266b, 46bc85872040a), so I think
we can just removeit entirely.
Link: https://lore.kernel.org/lkml/09094baf-dadf-4bce-9f63-f2a1f255f9a8@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230914155523.3839811-1-arnd@kernel.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch
kernel and then the below work->entry not empty bug occurs.
In hid_test_uclogic_exec_event_hook_test(), the filter->work is not
initialized to be added to p.event_hooks->list, and then the
schedule_work() in uclogic_exec_event_hook() will call __queue_work(),
which check whether the work->entry is empty and cause the below
warning call trace.
So call INIT_WORK() with a fake work to solve the issue. After applying
this patch, the below work->entry not empty bug never occurs.
WARNING: CPU: 0 PID: 2177 at kernel/workqueue.c:1787 __queue_work.part.0+0x780/0xad0
Modules linked in:
CPU: 0 PID: 2177 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__queue_work.part.0+0x780/0xad0
Code: 44 24 20 0f b6 00 84 c0 74 08 3c 03 0f 8e 52 03 00 00 f6 83 00 01 00 00 02 74 6f 4c 89 ef e8 c7 d8 f1 02 f3 90 e9 e5 f8 ff ff <0f> 0b e9 63 fc ff ff 89 e9 49 8d 57 68 4c 89 e6 4c 89 ff 83 c9 02
RSP: 0000:ffff888102bb7ce8 EFLAGS: 00010086
RAX: 0000000000000000 RBX: ffff888106b8e460 RCX: ffffffff84141cc7
RDX: 1ffff11020d71c8c RSI: 0000000000000004 RDI: ffff8881001d0118
RBP: dffffc0000000000 R08: 0000000000000001 R09: ffffed1020576f92
R10: 0000000000000003 R11: ffff888102bb7980 R12: ffff888106b8e458
R13: ffff888119c38800 R14: 0000000000000000 R15: ffff8881001d0100
FS: 0000000000000000(0000) GS:ffff888119c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888119506000 CR3: 0000000005286001 CR4: 0000000000770ef0
DR0: ffffffff8fdd6ce0 DR1: ffffffff8fdd6ce1 DR2: ffffffff8fdd6ce3
DR3: ffffffff8fdd6ce5 DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xc9/0x260
? __queue_work.part.0+0x780/0xad0
? report_bug+0x345/0x400
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x40
? asm_exc_invalid_op+0x16/0x20
? _raw_spin_lock+0x87/0xe0
? __queue_work.part.0+0x780/0xad0
? __queue_work.part.0+0x249/0xad0
queue_work_on+0x48/0x50
uclogic_exec_event_hook.isra.0+0xf7/0x160
hid_test_uclogic_exec_event_hook_test+0x2f1/0x5d0
? try_to_wake_up+0x151/0x13e0
? uclogic_exec_event_hook.isra.0+0x160/0x160
? _raw_spin_lock_irqsave+0x8d/0xe0
? __sched_text_end+0xa/0xa
? __sched_text_end+0xa/0xa
? migrate_enable+0x260/0x260
? kunit_try_run_case_cleanup+0xe0/0xe0
kunit_generic_run_threadfn_adapter+0x4a/0x90
? kunit_try_catch_throw+0x80/0x80
kthread+0x2b5/0x380
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes: a251d6576d2a ("HID: uclogic: Handle wireless device reconnection")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20231009064245.3573397-3-ruanjinjie@huawei.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
uclogic_params_ugee_v2_init_event_hooks()
When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and
then the below user-memory-access bug occurs.
In hid_test_uclogic_params_cleanup_event_hooks(),it call
uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so
when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata()
will access hdev->dev with hdev=NULL, which will cause below
user-memory-access.
So add a fake_device with quirks member and call hid_set_drvdata()
to assign hdev->dev->driver_data which avoids the null-ptr-def bug
for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying
this patch, the below user-memory-access bug never occurs.
general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN
KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f]
CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00
RSP: 0000:ffff88810679fc88 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0
R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92
R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080
FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0
DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6
DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Call Trace:
<TASK>
? die_addr+0x3d/0xa0
? exc_general_protection+0x144/0x220
? asm_exc_general_protection+0x22/0x30
? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
? sched_clock_cpu+0x69/0x550
? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70
? load_balance+0x2950/0x2950
? rcu_trc_cmpxchg_need_qs+0x67/0xa0
hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0
? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600
? __switch_to+0x5cf/0xe60
? migrate_enable+0x260/0x260
? __kthread_parkme+0x83/0x150
? kunit_try_run_case_cleanup+0xe0/0xe0
kunit_generic_run_threadfn_adapter+0x4a/0x90
? kunit_try_catch_throw+0x80/0x80
kthread+0x2b5/0x380
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in:
Dumping ftrace buffer:
(ftrace buffer empty)
---[ end trace 0000000000000000 ]---
RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600
Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00
RSP: 0000:ffff88810679fc88 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0
R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92
R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080
FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0
DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6
DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: disabled
Rebooting in 1 seconds..
Fixes: a251d6576d2a ("HID: uclogic: Handle wireless device reconnection")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20231009064245.3573397-2-ruanjinjie@huawei.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Originally we were quirking ASPM disabled specifically for VI when
used with Alder Lake, but it appears to have problems with Rocket
Lake as well.
Like we've done in the case of dpm for newer platforms, disable
ASPM for all Intel systems.
Cc: stable@vger.kernel.org # 5.15+
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Reported-and-tested-by: Paolo Gentili <paolo.gentili@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2036742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/drivers
mvebu arm for 6.7 (part 1)
Fix missing of_node_put in dove code base
* tag 'mvebu-arm-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
soc: dove: add missing of_node_put
Link: https://lore.kernel.org/r/87zg0e8w4v.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.7
- Generic fixups: Convert to platform remove callback returning void
- ti_sci: Minor fixups and mark driver as non-removable
- k3-socinfo: Documentation fixups, cosmetic fixups
- knav_qmss_queue: Optimize with device_get_match_data
Signed-off-by: Nishanth Menon <nm@ti.com>
* tag 'ti-driver-soc-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
soc/ti: wkup_m3_ipc: Convert to platform remove callback returning void
soc/ti: smartreflex: Convert to platform remove callback returning void
soc/ti: pruss: Convert to platform remove callback returning void
soc/ti: pm33xx: Convert to platform remove callback returning void
soc/ti: knav_qmss_queue: Convert to platform remove callback returning void
soc/ti: knav_dma: Convert to platform remove callback returning void
soc/ti: k3-ringacc: Convert to platform remove callback returning void
firmware: ti_sci: Mark driver as non removable
firmware: ti_sci: refactor deprecated strncpy
firmware: ti_sci: Use list_for_each_entry() helper
Link: https://lore.kernel.org/r/20231018165226.33x5cjn5jmgnm3di@magnolia
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Previously cp2112_gpio_irq_shutdown() always cancelled the
gpio_poll_worker, even if other IRQs were still active, and did not set
the gpio_poll flag to false. This resulted in any call to _shutdown()
resulting in interrupts no longer functioning on the chip until a
_remove() occurred (a.e. the cp2112 is unplugged or system rebooted).
Only cancel polling if all IRQs are disabled/masked, and correctly set
the gpio_poll flag, allowing polling to restart when an interrupt is
next enabled.
Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Link: https://lore.kernel.org/r/20231011182317.1053344-1-danny.kaehn@plexus.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect both `params` and `id` to be NUL-terminated based on their
usage with format strings:
format_node_data(iuparams, iunodeid, &lir->incident_node);
format_node_data(auparams, aunodeid, &lir->attached_node);
switch (lir->iq.class) {
case LIR_IQ_CLASS_DEGRADED:
pr_warn("Link degraded: RS=%02x RSID=%04x IC=%02x "
"IUPARAMS=%s IUNODEID=%s AUPARAMS=%s AUNODEID=%s\n",
sei_area->rs, sei_area->rsid, lir->ic, iuparams,
iunodeid, auparams, aunodeid);
NUL-padding is not required as both `params` and `id` have been memset
to 0:
memset(params, 0, PARAMS_LEN);
memset(id, 0, NODEID_LEN);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Note that there's no overread bugs in the current implementation as the
string literal "n/a" has a size much smaller than PARAMS_LEN or
NODEID_LEN. Nonetheless, let's favor strscpy().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231023-strncpy-drivers-s390-cio-chsc-c-v1-1-8b76a7b83260@google.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Let's move away from using strncpy() as it is deprecated [1].
Instead use strtomem() as `e.id` is already marked as nonstring:
| char id[4] __nonstring;
We don't need strtomem_pad() because `e` is already memset to 0 --
rendering any additional NUL-padding useless.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231023-strncpy-drivers-s390-char-sclp-c-v1-1-eaeef80522bb@google.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Fix virtual vs physical address confusion (which currently are the
same).
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Change format of the "cmg" sysfs attribute from hex to decimal to
make it easier to consume. Note that this should not break any existing
users since only values 2 and 3 are currently exported. Also the main
user already assumes decimal notation [1].
[1] https://sourceforge.net/p/sblim/gather/ci/master/tree/plugin/metriczCH.c
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
When new memory notifier types are added in common code and
unimplemented on s390, return success instead of EINVAL return code.
This prevents breakage when new memory notifier types are added.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Merge devfreq updates for v6.7 from Chanwoo Choi:
" Detailed description for this pull request:
1. Update devfreq core
- Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs
to support the specific device like UFS which handle the multiple clocks
through OPP (Operationg Performance Point) framework.
2. Update the devfreq / devfreq-event drivers
- Add perf support to the Rockchip DFI(DDR Monitor Module) devfreq-event driver.
: Generalize rockchip-dfi.c to support new RK3568/RK3588 using different DDR type.
: Covert devicetree bidning document format to yaml.
: DFI is a unit which is suitable for measuring DDR utilization
for the DDR frequency scaling driver. Add perf support feature
to rockchip-dfi.c to extend DFI usage. The perf support has been tested
on a RK3568 and a RK3399.
- Protect the OPP handling code in critical section
because the voltage of shared OPP might be changed by multiple drivers
on Mediatek CCI devfreq driver.
- Use device_get_match_data() on Samsung Exynos PPMU devfreq-event driver."
* tag 'devfreq-next-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: (26 commits)
dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support
dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support
dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml
PM / devfreq: rockchip-dfi: add support for RK3588
PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers
PM / devfreq: rockchip-dfi: make register stride SoC specific
PM / devfreq: rockchip-dfi: Add perf support
PM / devfreq: rockchip-dfi: give variable a better name
PM / devfreq: rockchip-dfi: Prepare for multiple users
PM / devfreq: rockchip-dfi: Pass private data struct to internal functions
PM / devfreq: rockchip-dfi: Handle LPDDR4X
PM / devfreq: rockchip-dfi: Handle LPDDR2 correctly
PM / devfreq: rockchip-dfi: Add RK3568 support
PM / devfreq: rockchip-dfi: Clean up DDR type register defines
PM / devfreq: rk3399_dmc,dfi: generalize DDRTYPE defines
PM / devfreq: rockchip-dfi: introduce channel mask
PM / devfreq: rockchip-dfi: Use free running counter
PM / devfreq: mediatek: unlock on error in mtk_ccifreq_target()
PM / devfreq: exynos-ppmu: Use device_get_match_data()
PM / devfreq: rockchip-dfi: dfi store raw values in counter struct
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge OPP (operating performance points) updates for 6.7 from Viresh
Kumar:
"- Extend support for the opp-level beyond required-opps (Ulf Hansson).
- Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru).
- dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait
SoCs and document named opp-microvolt property (Bjorn Andersson,
Dmitry Baryshkov and Christian Marangi).
- Fix -Wunsequenced warning (Nathan Chancellor).
- General cleanup (Viresh Kumar)."
* tag 'opp-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property
OPP: No need to defer probe from _opp_attach_genpd()
OPP: Remove genpd_virt_dev_lock
OPP: Reorder code in _opp_set_required_opps_genpd()
OPP: Add _link_required_opps() to avoid code duplication
OPP: Fix formatting of if/else block
dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs
OPP: Fix -Wunsequenced in _of_add_opp_table_v1()
dt-bindings: opp: opp-v2-kryo-cpu: Allow opp-peak-kBps
OPP: debugfs: Fix warning with W=1 builds
OPP: Remove doc style comments for internal routines
OPP: Add dev_pm_opp_find_level_floor()
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
|
|
When the driver unbinds, pmu is unregistered and i915->uabi_engines is
set to RB_ROOT. Due to this, when i915 PMU tries to stop the engine
events, it issues a warn_on because engine lookup fails.
All perf hooks are taking care of this using a pmu->closed flag that is
set when PMU unregisters. The stop event seems to have been left out.
Check for pmu->closed in pmu_event_stop as well.
Based on discussion here -
https://patchwork.freedesktop.org/patch/492079/?series=105790&rev=2
v2: s/is/if/ in commit title
v3: Add fixes tag and cc stable
Cc: <stable@vger.kernel.org> # v5.11+
Fixes: b00bccb3f0bb ("drm/i915/pmu: Handle PCI unbind")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020152441.3764850-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 31f6a06f0c543b43a38fab10f39e5fc45ad62aa2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add interrupt support for under-voltage notification. This functionality
can be used on systems capable to detect under-voltage state and having
enough capacity to let the SoC do some emergency preparation.
This change enforce default policy to shutdown system as soon as
interrupt is triggered.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231025084614.3092295-6-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The steering control and semaphore registers are inside an "always on"
power domain with respect to RC6. However there are some issues if
higher-level platform sleep states are entering/exiting at the same time
these registers are accessed. Grabbing GT forcewake and holding it over
the entire lock/steer/unlock cycle ensures that those sleep states have
been fully exited before we access these registers.
This is expected to become a formally documented/numbered workaround
soon.
Note that this patch alone isn't expected to have an immediately
noticeable impact on MCR (mis)behavior; an upcoming pcode firmware
update will also be necessary to provide the other half of this
workaround.
v2:
- Move the forcewake inside the Xe_LPG-specific IP version check. This
should only be necessary on platforms that have a steering semaphore.
Fixes: 3100240bf846 ("drm/i915/mtl: Add hardware-level lock for steering")
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231019170241.2102037-2-matthew.d.roper@intel.com
(cherry picked from commit 8fa1c7cd1fe9cdfc426a603e1f1eecd3f463c487)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal control (ARM drivers mostly) updates for 6.7-rc1 from
Daniel Lezcano:
"- Add support for Mediatek LVTS MT8192 driver along with the
suspend/resume routines (Balsam Chihi)
- Fix probe for THERMAL_V2 for the Mediatek LVTS driver (Markus
Schneider-Pargmann)
- Remove duplicate error message in the max76620 driver when
thermal_of_zone_register() fails as the sub routine already show one
(Thierry Reding)
- Add i.MX7D compatible bindings to fix a warning from dtbs_check for
the imx6ul platform (Alexander Stein)
- Add sa8775p compatible for the QCom tsens driver (Priyansh Jain)
- Fix error check in lvts_debugfs_init() which is checking against
NULL instead of PTR_ERR() on the LVTS Mediatek driver (Minjie Du)
- Remove unused variable in the thermal/tools (Kuan-Wei Chiu)
- Document the imx8dl thermal sensor (Fabio Estevam)
- Add variable names in callback prototypes to prevent warning from
checkpatch.pl for the imx8mm driver (Bragatheswaran Manickavel)
- Add missing unevaluatedProperties on child node schemas for tegra124
(Rob Herring)
- Add mt7988 support for the Mediatek LVTS driver (Frank Wunderlich)"
* tag 'thermal-v6.7-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/qcom/tsens: Drop ops_v0_1
thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
thermal/drivers/mediatek: Fix probe for THERMAL_V2
thermal/drivers/max77620: Remove duplicate error message
dt-bindings: timer: add imx7d compatible
dt-bindings: net: microchip: Allow nvmem-cell usage
dt-bindings: imx-thermal: Add #thermal-sensor-cells property
dt-bindings: thermal: tsens: Add sa8775p compatible
thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
tools/thermal: Remove unused 'mds' and 'nrhandler' variables
dt-bindings: thermal: fsl,scu-thermal: Document imx8dl
thermal/drivers/imx8mm_thermal: Fix function pointer declaration by adding identifier name
dt-bindings: thermal: nvidia,tegra124-soctherm: Add missing unevaluatedProperties on child node schemas
thermal/drivers/mediatek/lvts_thermal: Add mt7988 support
thermal/drivers/mediatek/lvts_thermal: Make coeff configurable
dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988
dt-bindings: thermal: mediatek: Add mt7988 lvts compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.7 from Viresh Kumar:
"- Add support for several Qualcomm SoC versions and other similar
changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
Gerhold and Varadarajan Narayanan).
- Cleanups to the tegra cpufreq driver (Sumit Gupta).
- Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob Herring).
- Add support for TI's am62p5 Soc (Bryan Brattlof).
- Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
Fainelli).
- Update Kconfig to mention i.MX7 as well (Alexander Stein)."
* tag 'cpufreq-arm-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (25 commits)
dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware
cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT
cpufreq: qcom-nvmem: add support for IPQ8064
cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu
cpufreq: qcom-nvmem: add support for IPQ6018
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018
cpufreq: qcom-nvmem: Add MSM8909
cpufreq: qcom-nvmem: Simplify driver data allocation
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
cpufreq: ARM_BRCMSTB_AVS_CPUFREQ cannot be used with ARM_SCMI_CPUFREQ
cpufreq: ti-cpufreq: Add opp support for am62p5 SoCs
cpufreq: dt-platdev: add am62p5 to blocklist
cpufreq: tegra194: remove redundant AND with cpu_online_mask
cpufreq: tegra194: use refclk delta based loop instead of udelay
cpufreq: tegra194: save CPU data to avoid repeated SMP calls
dt-bindings: cpufreq: cpufreq-qcom-hw: add SDM670 compatible
dt-bindings: cpufreq: qcom-nvmem: Document MSM8909
cpufreq: dt: platdev: Add MSM8909 to blocklist
...
|
|
Convert manual _UID references to use the standard ACPI helpers.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Drop VCHIQ_FOURCC_AS_4CHARS macro in favour of %p4cc format
modifier to print FourCC codes in the logs.
vchiq_use_internal() and vchiq_release_internal() uses entity
character-array to store a transient string that contains
a FourCC code. Increase the length of entity array(to 64 bytes)
since %p4cc requires more bytes to hold the output characters.
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20231025060717.71895-2-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the log level remnants since the logs are now ported to use
dynamic logging. Drop macros, externs and global variables which
were used in the log level mechanisms along with debugfs log entries.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20231024114428.443528-9-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The macro is not used anymore, so drop it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20231024114428.443528-8-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move vchiq_log_trace() custom logging wrapper based on printk
to use dynamic debug. The log category is dictated by enum
vchiq_log_category which will become the part of the trace
string format that will be logged to dynamic debug (for grep).
All the vchiq_log_trace() calls are adjusted to use the
modified wrapper.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20231024114428.443528-7-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert(and rename) vchiq_log_info() custom logging wrapping based on
printk to use dynamic debug. The wrapper is now renamed to
vchiq_log_debug() since most of the usage is around printing debug
information. The log category is dictated by enum vchiq_log_category
which will become the part of the debug string format that will be
logged to dynamic debug (for grep).
All the vchiq_log_info() calls are adjusted to use the
modified wrapper vchiq_log_debug().
The existing custom logging for vchiq_log_info() also tries
to log trace messages using SRVTRACE_LEVEL. This is simply
moved to use the vchiq_log_debug() directly.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20231024114428.443528-6-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move vchiq_log_warning() custom logging wrapper based on printk to use
dynamic debug. The log category is dictated by vchiq_log_category
which will become the part of the warning string format that will be
logged to dynamic debug (for grep).
All the vchiq_log_warning() calls are adjusted to use the
modified wrapper.
While at that, remove the extraneous "----" from few of the
warning string text.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20231024114428.443528-5-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move vchiq_log_error() custom logging wrapper based on printk,
to use dynamic debug. To categorise, enum vchiq_log_category
has been introduced, which will become the part of the error
string format that will be logged to dynamic debug (for grep).
All the vchiq_log_error() calls are adjusted to use the
dynamic debug wrapper. vchiq_loud_error_*() has been removed
as a part of this patch and replaced with dev_err (so that
they directly end up in kernel log, even if dynamic debug
isn't enabled), which serves the purpose.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20231024114428.443528-4-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pass struct device pointer to vchiq_init_slots(). In subsequent
commits, vchiq_log_* macros will be ported to use dynamic debug
(dev_dbg()), hence they need access to a struct device pointer.
No functional changes intended in this commit.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20231024114428.443528-3-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pass struct device pointer to vchiq_log_dump_mem(). In subsequent
commits, vchiq_log_* macros will be ported to use dynamic debug
(dev_dbg()), hence they need access to a struct device pointer.
No functional changes intended in this commit.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20231024114428.443528-2-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using strcpy has potential for buffer overflows. It should be replaced
with strscpy where possible. In this case the return value of strcpy is
not used, so we can safely replace it with strscpy.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20231023090001.7273-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused variables to shorten code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/04ce3eaaaf3897a22dcb95ce2f449658199770d8.1698042685.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove union qos_tclas as it is just set to 0 and never used.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/7e4d32fe7a1219a9131ce49308f68790e07fb83e.1698042685.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
