summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-10-20net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernelsFlorian Fainelli
For a kernel that is being kexec'd we re-enable the integrated GPHY in order for the subsequent MDIO bus scan to succeed and properly bind to the bcm7xxx PHY driver. If we did not do that, the GPHY would be shut down by the time the MDIO driver is probing the bus, and it would fail to read the correct PHY OUI and therefore bind to an appropriate PHY driver. Later on, this would cause DSA not to be able to successfully attach to the PHY, and the interface would not be created at all. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: add recursion limit to GROSabrina Dubroca
Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20clocksource: Add J-Core timer/clocksource driverRich Felker
At the hardware level, the J-Core PIT is integrated with the interrupt controller, but it is represented as its own device and has an independent programming interface. It provides a 12-bit countdown timer, which is not presently used, and a periodic timer. The interval length for the latter is programmable via a 32-bit throttle register whose units are determined by a bus-period register. The periodic timer is used to implement both periodic and oneshot clock event modes; in oneshot mode the interrupt handler simply disables the timer as soon as it fires. Despite its device tree node representing an interrupt for the PIT, the actual irq generated is programmable, not hard-wired. The driver is responsible for programming the PIT to generate the hardware irq number that the DT assigns to it. On SMP configurations, J-Core provides cpu-local instances of the PIT; no broadcast timer is needed. This driver supports the creation of the necessary per-cpu clock_event_device instances. A nanosecond-resolution clocksource is provided using the J-Core "RTC" registers, which give a 64-bit seconds count and 32-bit nanoseconds that wrap every second. The driver converts these to a full-range 32-bit nanoseconds count. Signed-off-by: Rich Felker <dalias@libc.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/b591ff12cc5ebf63d1edc98da26046f95a233814.1476393790.git.dalias@libc.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-20ahci: fix nvec checkChristoph Hellwig
commit 17a51f12 ("ahci: only try to use multi-MSI mode if there is more than 1 port") lead to a case where nvec isn't initialized before it's used. Fix this by moving the check into the n_ports conditional. Reported-and-reviewed-by Colin Ian King <colin.king@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-10-20Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Most of these are CC'd for stable, but there are a few fixing issues introduced during the recent merge window too. There's also a fix for the xgene PMU driver, but it seemed daft to send as a separate pull request, so I've included it here with the rest of the fixes. - Fix ACPI boot due to recent broken NUMA changes - Fix remote enabling of CPU features requiring PSTATE bit manipulation - Add address range check when emulating user cache maintenance - Fix LL/SC loops that allow compiler to introduce memory accesses - Fix recently added write_sysreg_s macro - Ensure MDCR_EL2 is initialised on qemu targets without a PMU - Avoid kaslr breakage due to MODVERSIONs and DYNAMIC_FTRACE - Correctly drive recent ld when building relocatable Image - Remove junk IS_ERR check from xgene PMU driver added during merge window - pr_cont fixes after core changes in the merge window" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: remove pr_cont abuse from mem_init arm64: fix show_regs fallout from KERN_CONT changes arm64: kernel: force ET_DYN ELF type for CONFIG_RELOCATABLE=y arm64: suspend: Reconfigure PSTATE after resume from idle arm64: mm: Set PSTATE.PAN from the cpu_enable_pan() call arm64: cpufeature: Schedule enable() calls instead of calling them via IPI arm64: Cortex-A53 errata workaround: check for kernel addresses arm64: percpu: rewrite ll/sc loops in assembly arm64: swp emulation: bound LL/SC retries before rescheduling arm64: sysreg: Fix use of XZR in write_sysreg_s arm64: kaslr: keep modules close to the kernel when DYNAMIC_FTRACE=y arm64: kernel: Init MDCR_EL2 even in the absence of a PMU perf: xgene: Remove bogus IS_ERR() check arm64: kernel: numa: fix ACPI boot cpu numa node mapping arm64: kaslr: fix breakage with CONFIG_MODVERSIONS=y
2016-10-20Merge tag 'ceph-for-4.9-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull Ceph fixes from Ilya Dryomov: "An rbd exclusive-lock edge case fix and several filesystem fixups. Nikolay's error path patch is tagged for stable, everything else but readdir vs frags race was introduced in this merge window" * tag 'ceph-for-4.9-rc2' of git://github.com/ceph/ceph-client: ceph: fix non static symbol warning ceph: fix uninitialized dentry pointer in ceph_real_mount() ceph: fix readdir vs fragmentation race ceph: fix error handling in ceph_read_iter rbd: don't retry watch reregistration if header object is gone rbd: don't wait for the lock forever if blacklisted
2016-10-20Merge tag 'mmc-v4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.9 rc2. This time I have also included a few changes for a memstick driver which has a corresponding mmc driver. They use the same USB device as parent, hence both needs to play nice with runtime PM, which they didn't. MMC core: - Update MAINTAINERS as the mmc tree moved to kernel.org - A few fixes for HS400es mode - A few other minor fixes MMC host: - sdhci: Fix an issue when dealing with stop commands - sdhci-pci: Fix a bus power failure issue - sdhci-esdhc-imx: Correct two register accesses - sdhci-of-arasan: Fix the 1.8V I/O signal switch behaviour - rtsx_usb_sdmmc: Fix runtime PM issues Other: (Because of no maintainer) - memstick: rtsx_usb_ms: Fix runtime PM issues" * tag 'mmc-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: MAINTAINERS: mmc: Move the mmc tree to kernel.org memstick: rtsx_usb_ms: Manage runtime PM when accessing the device memstick: rtsx_usb_ms: Runtime resume the device when polling for cards mmc: rtsx_usb_sdmmc: Handle runtime PM while changing the led mmc: rtsx_usb_sdmmc: Avoid keeping the device runtime resumed when unused mmc: sdhci: cast unsigned int to unsigned long long to avoid unexpeted error mmc: sdhci-esdhc-imx: Correct two register accesses mmc: sdhci-pci: Fix bus power failing to enable for some Intel controllers mmc: sdhci-pci: Let devices define their own sdhci_ops mmc: sdhci: Rename sdhci_set_power() to sdhci_set_power_noreg() mmc: sdhci: Fix SDHCI_QUIRK2_STOP_WITH_TC mmc: core: Annotate cmd_hdr as __le32 mmc: sdhci-of-arasan: add sdhci_arasan_voltage_switch for arasan, 5.1 mmc: core: changes frequency to hs_max_dtr when selecting hs400es mmc: core: switch to 1V8 or 1V2 for hs400es mode mmc: block: add missing header dependencies mmc: sdhci-of-arasan: Fix non static symbol warning
2016-10-20xhci: use default USB_RESUME_TIMEOUT when resuming ports.Mathias Nyman
USB2 host inititated resume, and system suspend bus resume need to use the same USB_RESUME_TIMEOUT as elsewhere. This resolves a device disconnect issue at system resume seen on Intel Braswell and Apollolake, but is in no way limited to those platforms. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-20xhci: workaround for hosts missing CAS bitMathias Nyman
If a device is unplugged and replugged during Sx system suspend some Intel xHC hosts will overwrite the CAS (Cold attach status) flag and no device connection is noticed in resume. A device in this state can be identified in resume if its link state is in polling or compliance mode, and the current connect status is 0. A device in this state needs to be warm reset. Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Observed on Cherryview and Apollolake as they go into compliance mode if LFPS times out during polling, and re-plugged devices are not discovered at resume. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-20xhci: add restart quirk for Intel Wildcatpoint PCHMathias Nyman
xHC in Wildcatpoint-LP PCH is similar to LynxPoint-LP and need the same quirks to prevent machines from spurious restart while shutting them down. Reported-by: Hasan Mahmood <hasan.mahm@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-20stmmac: display the descriptors if DES0 = 0Giuseppe CAVALLARO
It makes sense to display the descriptors even if DES0 is zero. This helps for example in case of it is needed to dump rx write-back descriptors to get timestamp status. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: pci: Fix reset wait for SwitchX2Jiri Pirko
SwitchX2 firmware does not implement reset done yet. Moreover, when busy-polled for ready magic, that slows down firmware and reset takes longer than the defined timeout, causing initialization to fail. So restore the previous behaviour and just sleep in this case. Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: switchx2: Fix ethernet port initializationElad Raz
When creating an ethernet port fails, we must move the port to disable, otherwise putting the port in switch partition 0 (ETH) or 1 (IB) will always fails. Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: spectrum_router: Make mlxsw_sp_router_fib4_del return void and remove ↵Jiri Pirko
warn The function return value is not checked anywhere. Also, the warning causes huge slowdown when removing large number of FIB entries which were not offloaded, because of ordering issue. Ido's preparing a patchset to fix the ordering issue, but that is definitelly not net tree material. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: spectrum_router: Use correct tree index for bindingJiri Pirko
By a mistake, there is tree index 0 passed to RALTB. Should be MLXSW_SP_LPM_TREE_MIN. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Reported-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20Merge tag 'gvt-next-fix-2016-10-20' of https://github.com/01org/gvt-linux ↵Daniel Vetter
into drm-intel-next-queued gvt-next-fix-2016-10-20 This contains fix for first pull request. - clean up header mess between i915 core and gvt - new MAINTAINERS item - new kernel-doc section - fix compiling warnings - gvt gem fix series from Chris - fix for i915 intel_engine_cs change - some sparse fixes from Changbin Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-10-20drm/i915: Add a sunset clause to GPU hang loggingChris Wilson
If the kernel is old, more than a few releases old, chances are that the user is using an old kernel for a good reason, despite there being GPU hangs. After 180days since driver release stop suggesting that they should send those reports upstream. [Since Daniel acked this I expect he will pick up the dim patch to automatically update the DRIVER_TIMESTAMP everytime we tag a new release.] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161014134428.29582-1-chris@chris-wilson.co.uk Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-10-20drm/imx: ipuv3-plane: disable local alpha for planes without alpha channelPhilipp Zabel
Without this patch, after enabling the overlay plane with an RGBA framebuffer, switching to a framebuffer without alpha channel would cause the plane to vanish, since the pixel local alpha is constant zero in that case. Disable local alpha again when setting an opaque framebuffer. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-20drm/imx: ipuv3-plane: make sure x/y offsets are even in case of chroma ↵Philipp Zabel
subsampling Odd x/y offsets are not allowed for horizontally/vertically chroma subsampled planar YUV formats. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Liu Ying <gnuiyl@gmail.com>
2016-10-20gpio / ACPI: fix returned error from acpi_dev_gpio_irq_get()David Arcari
acpi_dev_gpio_irq_get() currently ignores the error returned by acpi_get_gpiod_by_index() and overwrites it with -ENOENT. Problem is this error can be -EPROBE_DEFER, which just blows up some drivers when the module ordering is not correct. Cc: stable@vger.kernel.org Signed-off-by: David Arcari <darcari@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-20gpio: mockup: add sysfs dependencyArnd Bergmann
Building the gpio-mockup driver without SYSFS results in a harmless Kconfig warning: warning: (GPIO_MOCKUP) selects GPIO_SYSFS which has unmet direct dependencies (GPIOLIB && SYSFS) We can easily avoid that warning by adding a dependency on SYSFS. Fixes: 0f98dd1b27d2 ("gpio/mockup: add virtual gpio device") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-20gpio: stmpe: || vs && typoDan Carpenter
&& was obviously intended here. Fixes: 6936e1f88d23 ('gpio: stmpe: Write int status register only when needed') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-20gpio: mxs: Unmap region obtained by of_iomapArvind Yadav
Free memory mapping, if mxs_gpio_probe is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-20drm/i915: Stop reporting error details in dmesg as well as the error-stateChris Wilson
As we already capture all the information from the registers into the error-state, also dumping that to dmesg just generates noise that upsets CI and users alike (and doesn't provide us with any more information). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20161019125203.28851-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
2016-10-20irqchip/gic: Add missing \n to CPU IF adjustment messageMarc Zyngier
It really looks bad without a newline. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-10-20irqchip/jcore: Don't show Kconfig menu item for driverRich Felker
Core drivers for J-Core SoCs will be selected implicitly via CONFIG_SH_JCORE_SOC instead. Based on a corresponding change to the clocksource/timer driver requested by Daniel Lezcano. Signed-off-by: Rich Felker <dalias@libc.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-sh@vger.kernel.org Link: http://lkml.kernel.org/r/883a3d17084003e3cf21bab73ec12828fe4ff6c6.1476899495.git.dalias@libc.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-20drm/i915/gvt: do not ignore return value of create_scratch_pageDu, Changbin
Function create_scratch_page() may fail in some cases. Signed-off-by: Du, Changbin <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: fix spare warnings on odd constant _Bool castDu, Changbin
The function return values should has type int if it return a integer value. Signed-off-by: Du, Changbin <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: mark symbols static where possibleDu, Changbin
Mark all local functions & variables as static. Signed-off-by: Du, Changbin <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: fix sparse warnings on different address spacesDu, Changbin
Add proper __iomem annotation for pointers obtained via ioremap(). Signed-off-by: Du, Changbin <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: properly access enabled intel_engine_csZhenyu Wang
Switch to use new for_each_engine() helper to properly access enabled intel_engine_cs as i915 core has changed that to be dynamic managed. At GVT-g init time would still depend on ring mask to determine engine list as it's earlier. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: Remove defunct vmap_batch()Chris Wilson
This code was removed from i915_cmd_parser.c but still an obsolete version wound up being duplicated into gvt/cmd_parser.c. Good riddance. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: Use common mapping routines for shadow_bb objectChris Wilson
We have the ability to map an object, so use it rather than opencode it badly. Note that the object remains permanently pinned, this is poor practise. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: Use common mapping routines for indirect_ctx objectChris Wilson
We have the ability to map an object, so use it rather than opencode it badly. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: Stop waiting whilst holding struct_mutexChris Wilson
For whatever reason, the gvt scheduler runs synchronously. At the very least, lets run synchronously without holding the struct_mutex. v2: cut'n'paste mutex_lock instead of unlock. Replace long hold of struct_mutex with a mutex to serialise the worker threads. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: Stop checking for impossible interrupts from a kthreadChris Wilson
The kthread will not be interrupted, don't even bother checking. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: Hold a reference on the requestChris Wilson
The workload took a pointer to the request, and even waited upon, without holding a reference on the request. Take that reference explicitly and fix up the error path following request allocation that missed flushing the request. v2: [zhenyuw] - drop request put in error path for dispatch, as main thread caller will handle it identically to a real request. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: Remove dangerous unpin of backing storage of bound GPU objectChris Wilson
Unpinning the pages prior to the object being release from the GPU may allow the GPU to read and write into system pages (i.e. use after free by the hw). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: Use the returned VMA to provide the virtual addressChris Wilson
The purpose of returning the just-pinned VMA is so that we can use the information within, like its address. Also it should be tracked and used as the cookie to unpin... Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: i915_gem_object_create() returns an error pointerChris Wilson
On failure from i915_gem_object_create(), we need to check for an error pointer not NULL. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: Add runtime pm around fencesChris Wilson
Manipulating the fence_list requires the runtime wakelock, as does writing to the fence registers. Acquire a wakelock for the former, and assert that the device is awake for the latter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20Documentation/gpu: Add section for Intel GVT-g host supportZhenyu Wang
Update with brief overview and reference for more detailed arch design documents. Add new section for Intel GVT-g host support. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: Fix warning on obsolete function usageZhenyu Wang
Don't use obsolete drm_gem_object_unreference() but switch to i915_gem_object_put(). Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20drm/i915/gvt: clean up intel_gvt.h as interface for i915 coreZhenyu Wang
i915 core should only call functions and structures exposed through intel_gvt.h. Remove internal gvt.h and i915_pvinfo.h. Change for internal intel_gvt structure as private handler which not requires to expose gvt internal structure for i915 core. v2: Fix per Chris's comment - carefully handle dev_priv->gvt assignment - add necessary bracket for macro helper - forward declartion struct intel_gvt - keep free operation within same file handling alloc v3: fix use after free and remove intel_gvt.initialized v4: change to_gvt() to an inline Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-20USB: serial: cp210x: fix tiocmget error handlingJohan Hovold
The current tiocmget implementation would fail to report errors up the stack and instead leaked a few bits from the stack as a mask of modem-status flags. Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-20Bluetooth: btwilink: Fix probe return valueJacob Siverskog
Probe functions should return 0 on success. This driver's probe returns the value returned by hci_register_dev(), which is the hci index. This works for systems with only one hci device (id = 0) but for systems where the btwilink device ends up with an id larger than 0, things will start to fall apart. Make the probe function return 0 on success. Signed-off-by: Jacob Siverskog <jacob@teenage.engineering> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-20drm/i915: Handle early failure during intel_get_load_detect_pipeChris Wilson
In the error path, we have to be ready to handle an error before either the state or restore_state have been allocated. [ 397.001342] BUG: unable to handle kernel NULL pointer dereference at (null) [ 397.001419] IP: [<ffffffffa04347b4>] intel_get_load_detect_pipe+0xe4/0x610 [i915] [ 397.001502] PGD 136a2a067 [ 397.001523] PUD 134b5f067 [ 397.001546] PMD 0 [ 397.001569] Oops: 0002 [#1] PREEMPT SMP [ 397.001599] Modules linked in: snd_hda_intel i915 cdc_ncm usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich mei_me mei sdhci_pci sdhci mmc_core e1000e ptp pps_core [last unloaded: i915] [ 397.001902] CPU: 1 PID: 9287 Comm: kms_force_conne Tainted: G U 4.9.0-rc1-CI-CI_DRM_1730+ #1 [ 397.001965] Hardware name: LENOVO 2356GCG/2356GCG, BIOS G7ET31WW (1.13 ) 07/02/2012 [ 397.002017] task: ffff880138c38040 task.stack: ffffc900083e4000 [ 397.002057] RIP: 0010:[<ffffffffa04347b4>] [<ffffffffa04347b4>] intel_get_load_detect_pipe+0xe4/0x610 [i915] [ 397.002153] RSP: 0018:ffffc900083e7ae8 EFLAGS: 00010286 [ 397.002191] RAX: 00000000ffffffdd RBX: ffffc900083e7bc8 RCX: 0000000000000006 [ 397.002239] RDX: 0000000000000006 RSI: ffff880138c388b8 RDI: ffffc900083e79e0 [ 397.002287] RBP: ffffc900083e7b78 R08: 0000000000000000 R09: 0000000000000000 [ 397.002335] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 397.002386] R13: ffff8801305e1158 R14: 00000000ffffffdd R15: 0000000000000000 [ 397.002434] FS: 00007fea1b03c740(0000) GS:ffff88013e240000(0000) knlGS:0000000000000000 [ 397.002488] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 397.002528] CR2: 0000000000000000 CR3: 00000001361da000 CR4: 00000000001406e0 [ 397.002576] Stack: [ 397.002592] ffff88013046f180 0000000000000000 ffffc900083e7bc0 0000000000000000 [ 397.002655] 0000000000000000 ffff8801306bd038 ffff88012e980000 ffffc90000000001 [ 397.002718] ffffc90000000000 ffff880136b8ca88 ffff88012e980890 ffff88012e980540 [ 397.002780] Call Trace: [ 397.002828] [<ffffffffa044e8c4>] intel_crt_detect+0x3c4/0x8f0 [i915] [ 397.002876] [<ffffffff810e37fa>] ? vprintk_default+0x1a/0x20 [ 397.002918] [<ffffffff8116eb68>] ? printk+0x43/0x4b [ 397.002956] [<ffffffff81546b06>] drm_helper_probe_single_connector_modes+0x406/0x4f0 [ 397.003014] [<ffffffff81819c09>] ? mutex_unlock+0x9/0x10 [ 397.003054] [<ffffffff815723dc>] drm_mode_getconnector+0x33c/0x3c0 [ 397.003099] [<ffffffff810ed59d>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 397.003147] [<ffffffff811a6bae>] ? __might_fault+0x3e/0x90 [ 397.003191] [<ffffffff8155aaf6>] drm_ioctl+0x1f6/0x480 [ 397.003231] [<ffffffff815720a0>] ? drm_mode_connector_property_set_ioctl+0x30/0x30 [ 397.003285] [<ffffffff8120308e>] do_vfs_ioctl+0x8e/0x690 [ 397.003324] [<ffffffff810a102c>] ? task_work_run+0x8c/0xb0 [ 397.003366] [<ffffffff810d6d92>] ? trace_hardirqs_on_caller+0x122/0x1b0 [ 397.003412] [<ffffffff812036cc>] SyS_ioctl+0x3c/0x70 [ 397.003451] [<ffffffff8181df2e>] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 397.003496] Code: 85 c0 41 89 c6 75 57 49 8b 85 f0 00 00 00 48 89 de 45 31 ff 48 8d 78 20 e8 1a 89 13 e1 45 31 c9 85 c0 41 89 c6 0f 84 2f 01 00 00 <f0> 41 83 29 01 74 53 f0 41 83 2f 01 74 2d 41 83 fe dd 75 35 48 [ 397.003837] RIP [<ffffffffa04347b4>] intel_get_load_detect_pipe+0xe4/0x610 [i915] [ 397.003921] RSP <ffffc900083e7ae8> [ 397.003947] CR2: 0000000000000000 Testcase: igt/kms_force_connector_basic/force-load-detect # ivb-3720m Fixes: 0853695c3ba4 ("drm: Add reference counting to drm_atomic_state" Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161019113743.19847-1-chris@chris-wilson.co.uk
2016-10-20drm/fb_cma_helper: do not free fbdev if there is noneStefan Agner
If fbdev emulation is not in use (or not built-in), fb_helper.fbdev is NULL. Don't call calling drm_fbdev_cma_defio_fini in this case. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161020003221.2941-2-stefan@agner.ch
2016-10-20thermal/powerclamp: correct cpu support checkEric Ernst
Initial logic for checking CPU match resulted in OR of CPU features rather than the intended AND. Updated to use boot_cpu_has macro rather than x86_match_cpu. In addition, MWAIT is the only required CPU feature for idle injection to work. Drop other feature requirements since they are only needed for optimal efficiency. CC: stable@vger.kernel.org #v4.7 Signed-off-by: Eric Ernst <eric.ernst@linux.intel.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-10-20thermal: intel_pch_thermal: Enable Haswell PCHSrinivas Pandruvada
Added missing support for Haswell PCH thermal sensor. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 16:58:51 +0000