summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-10-26mlxsw: spectrum_router: Expose RIF MAC profiles to devlink resourceDanielle Ratson
Expose via devlink-resource the maximum number of RIF MAC profiles and their current occupancy, so it can be used for debug and writing generic tests, like in the next patch. Example for Spectrum-2 output: $ devlink resource show pci/0000:06:00.0 ... name rif_mac_profiles size 4 occ 0 unit entry dpipe_tables none Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26mlxsw: spectrum_router: Add RIF MAC profiles supportDanielle Ratson
Currently, mlxsw enforces that all the router interfaces (RIFs) have the same MAC prefix. Relax this limitation by using RIF MAC profiles. Each profile is associated with a particular MAC prefix and multiple RIFs can use the same profile. Therefore, the number of possible MAC prefixes is no longer one, but the number of profiles supported by the device. Store the profiles in an IDR and reference count them according to the number of RIFs using them. Associate a RIF with a profile when the RIF is created and remove the association when the RIF is deleted. Change the association following 'NETDEV_CHANGEADDR' events, except when only one RIF is using the profile. In which case, change the MAC prefix of the profile itself instead of associating the RIF with a new profile. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26mlxsw: spectrum_router: Propagate extack furtherDanielle Ratson
The next patch will set the MAC profile of a router interface (RIF) as part of its configure() callback. The operation can fail in case the maximum number of profiles was exceeded. Add extack to mlxsw_sp_rif_ops::configure() in order to communicate such failures to user space. In addition, the MAC profile of a RIF can change following a 'NETDEV_CHANGEADDR' notification. Propagate extack to mlxsw_sp_router_port_change_event() so that failures could be communicated in this path as well. No functional changes intended. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26mlxsw: resources: Add resource identifier for RIF MAC profilesDanielle Ratson
Add a resource identifier for maximum RIF MAC profiles so that it could be later used to query the information from firmware. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26mlxsw: reg: Add MAC profile ID field to RITR registerDanielle Ratson
Add MAC profile ID field to RITR register so that it could be used for associating a RIF with a MAC profile ID by a later patch. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-25 This series contains updates to ice driver only. Dave adds event handler for LAG NETDEV_UNREGISTER to unlink device from link aggregate. Yongxin Liu adds a check for PTP support during release which would cause a call trace on non-PTP supported devices. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26vrf: run conntrack only in context of lower/physdev for locally generated ↵Florian Westphal
packets The VRF driver invokes netfilter for output+postrouting hooks so that users can create rules that check for 'oif $vrf' rather than lower device name. This is a problem when NAT rules are configured. To avoid any conntrack involvement in round 1, tag skbs as 'untracked' to prevent conntrack from picking them up. This gets cleared before the packet gets handed to the ip stack so conntrack will be active on the second iteration. One remaining issue is that a rule like output ... oif $vrfname notrack won't propagate to the second round because we can't tell 'notrack set via ruleset' and 'notrack set by vrf driver' apart. However, this isn't a regression: the 'notrack' removal happens instead of unconditional nf_reset_ct(). I'd also like to avoid leaking more vrf specific conditionals into the netfilter infra. For ingress, conntrack has already been done before the packet makes it to the vrf driver, with this patch egress does connection tracking with lower/physical device as well. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26Merge tag 'mlx5-updates-2021-10-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-10-25 Misc updates for mlx5 driver: 1) Misc updates and cleanups: - Don't write directly to netdev->dev_addr, From Jakub Kicinski - Remove unnecessary checks for slow path flag in tc module - Fix unused function warning of mlx5i_flow_type_mask - Bridge, support replacing existing FDB entry 2) Sub Functions, Reduction in memory usage: - Reduce flow counters bulk query buffer size - Implement max_macs devlink parameter - Add devlink vendor params to control Event Queue sizes - Added SF life cycle trace points by Parav/ 3) From Aya, Firmware health buffer reporting improvements - Print health buffer by log level and more missing information - Periodic update of host time to firmware ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26firmware: arm_ffa: Remove unused 'compat_version' variableArnd Bergmann
The newly added ffa_compatible_version_find() function causes a build warning because of a variable that is never used: drivers/firmware/arm_ffa/driver.c:180:6: error: unused variable 'compat_version' [-Werror,-Wunused-variable] u32 compat_version; Link: https://lore.kernel.org/r/20211026083400.3444946-1-arnd@kernel.org Fixes: 8e3f9da608f1 ("firmware: arm_ffa: Handle compatibility with different firmware versions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-26phy: Sparx5 Eth SerDes: Fix return value check in sparx5_serdes_probe()Yang Yingliang
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 2ff8a1eeb5aa ("phy: Add Sparx5 ethernet serdes PHY driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210909072149.2934047-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: qcom-snps: Correct the FSEL_MASKSandeep Maheswaram
The FSEL_MASK which selects the refclock is defined incorrectly. It should be [4:6] not [5:7]. Due to this incorrect definition, the BIT(7) in USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 is reset which keeps PHY analog blocks ON during suspend. Fix this issue by correctly defining the FSEL_MASK. Fixes: 51e8114f80d0 ("phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs") Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> Link: https://lore.kernel.org/r/1635135575-5668-1-git-send-email-quic_c_sanm@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: hisilicon: Add of_node_put() in phy-hisi-inno-usb2Wan Jiabing
Fix following coccicheck warning: ./drivers/phy/hisilicon/phy-hisi-inno-usb2.c:138:1-23: WARNING: Function for_each_child_of_node should have of_node_put() before break Early exits from for_each_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20211015080154.16016-1-wanjiabing@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: qcom-qmp: another fix for the sc8180x PCIe definitionDmitry Baryshkov
Commit f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support") added SC8180X PCIe tables, but used sm8250_qmp_pcie_serdes_tbl as a serdes table because of the copy paste error. Commit bfccd9a71a08 ("phy: qcom-qmp: Fix sc8180x PCIe definition") corrected part of this mistake by pointing serdes_tbl to sc8180x_qmp_pcie_serdes_tbl, however the serdes_tbl_num field was not updated to use sc8180x table. So let's now fix the serdes_tbl_num field too. Fixes: bfccd9a71a08 ("phy: qcom-qmp: Fix sc8180x PCIe definition") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020155604.1374530-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: cadence-torrent: Add support to output received reference clockSwapnil Jakhade
Add support to output received reference clock. Model the received reference clock as an alternate parent of reference clock driver clock. When received refclk is selected to output on cmn_refclk_p/m, this is the internal reference clock driven on the pma_cmn_refclk_int. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210922123735.21927-5-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: cadence-torrent: Model reference clock driver as a clock to enable ↵Swapnil Jakhade
derived refclk When reference clock driver is enabled, either derived or received refclk is output on cmn_refclk_p/m. Update the reference clock driver implementation by modelling reference clock driver as a "clock" with derived reference clock set as its default parent. The support for received reference clock will be added in a separate patch. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210922123735.21927-4-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: cadence-torrent: Migrate to clk_hw based registration and OF APIsSwapnil Jakhade
Use clk_hw based provider APIs to register clks to remove the usage of deprecated APIs. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210922123735.21927-2-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: ti: gmii-sel: check of_get_address() for failureDan Carpenter
Smatch complains that if of_get_address() returns NULL, then "size" isn't initialized. Also it would lead to an Oops. Fixes: 7f78322cdd67 ("phy: ti: gmii-sel: retrieve ports number and base offset from dt") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20210914110038.GB11657@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: stm32: add phy tuning supportAmelie Delaunay
It can be necessary to adjust the phys settings to compensate parasitics. This patch adds support of new optional properties to configure the tune interface of the phys of stm32-usbphyc. Properties are optional, that's why each property is skipped if not found (-EINVAL). Phy tuning is restored on resume because if deep low power state is achieved, phy tuning configuration is reset. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211015161427.220784-4-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: stm32: restore utmi switch on resumeAmelie Delaunay
UTMI switch value can be lost during suspend/resume, depending on the power state reached. This patch adds resume function to usbphyc, to reconfigure utmi switch after suspend. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211015161427.220784-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: qcom-qusb2: Fix a memory leak on probeVladimir Zapolskiy
On success nvmem_cell_read() returns a pointer to a dynamically allocated buffer, and therefore it shall be freed after usage. The issue is reported by kmemleak: # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff3b3803e4b280 (size 128): comm "kworker/u16:1", pid 107, jiffies 4294892861 (age 94.120s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007739afdc>] __kmalloc+0x27c/0x41c [<0000000071c0fbf8>] nvmem_cell_read+0x40/0xe0 [<00000000e803ef1f>] qusb2_phy_init+0x258/0x5bc [<00000000fc81fcfa>] phy_init+0x70/0x110 [<00000000e3d48a57>] dwc3_core_soft_reset+0x4c/0x234 [<0000000027d1dbd4>] dwc3_core_init+0x68/0x990 [<000000001965faf9>] dwc3_probe+0x4f4/0x730 [<000000002f7617ca>] platform_probe+0x74/0xf0 [<00000000a2576cac>] really_probe+0xc4/0x470 [<00000000bc77f2c5>] __driver_probe_device+0x11c/0x190 [<00000000130db71f>] driver_probe_device+0x48/0x110 [<0000000019f36c2b>] __device_attach_driver+0xa4/0x140 [<00000000e5812ff7>] bus_for_each_drv+0x84/0xe0 [<00000000f4bac574>] __device_attach+0xe4/0x1c0 [<00000000d3beb631>] device_initial_probe+0x20/0x30 [<000000008019b9db>] bus_probe_device+0xa4/0xb0 Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210922233548.2150244-1-vladimir.zapolskiy@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: qcom-qmp: Add QCM2290 USB3 PHY supportShawn Guo
Enable QCM2290 USB3 PHY support by adding the qmp_phy_cfg data which are taken from downstream kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210927064829.5752-3-shawn.guo@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26spi: spl022: fix Microwire full duplex modeThomas Perrot
There are missing braces in the function that verify controller parameters, then an error is always returned when the parameter to select Microwire frames operation is used on devices allowing it. Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com> Link: https://lore.kernel.org/r/20211022142104.1386379-1-thomas.perrot@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-26irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()Marc Zyngier
The MIPS GIC driver uses irq_cpu_online() to go and program the per-CPU interrupts. However, this method iterates over all IRQs in the system, despite only 3 per-CPU interrupts being of interest. Let's be terribly bold and do the iteration ourselves. To ensure mutual exclusion, hold the gic_lock spinlock that is otherwise taken while dealing with these interrupts. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20211021170414.3341522-3-maz@kernel.org
2021-10-26irq: remove handle_domain_{irq,nmi}()Mark Rutland
Now that entry code handles IRQ entry (including setting the IRQ regs) before calling irqchip code, irqchip code can safely call generic_handle_domain_irq(), and there's no functional reason for it to call handle_domain_irq(). Let's cement this split of responsibility and remove handle_domain_irq() entirely, updating irqchip drivers to call generic_handle_domain_irq(). For consistency, handle_domain_nmi() is similarly removed and replaced with a generic_handle_domain_nmi() function which also does not perform any entry logic. Previously handle_domain_{irq,nmi}() had a WARN_ON() which would fire when they were called in an inappropriate context. So that we can identify similar issues going forward, similar WARN_ON_ONCE() logic is added to the generic_handle_*() functions, and comments are updated for clarity and consistency. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2021-10-26nvme-tcp: fix H2CData PDU send accounting (again)Sagi Grimberg
We should not access request members after the last send, even to determine if indeed it was the last data payload send. The reason is that a completion could have arrived and trigger a new execution of the request which overridden these members. This was fixed by commit 825619b09ad3 ("nvme-tcp: fix possible use-after-completion"). Commit e371af033c56 broke that assumption again to address cases where multiple r2t pdus are sent per request. To fix it, we need to record the request data_sent and data_len and after the payload network send we reference these counters to determine weather we should advance the request iterator. Fixes: e371af033c56 ("nvme-tcp: fix incorrect h2cdata pdu offset accounting") Reported-by: Keith Busch <kbusch@kernel.org> Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-26nvmet-tcp: fix a memory leak when releasing a queueMaurizio Lombardi
page_frag_free() won't completely release the memory allocated for the commands, the cache page must be explicitly freed by calling __page_frag_cache_drain(). This bug can be easily reproduced by repeatedly executing the following command on the initiator: $echo 1 > /sys/devices/virtual/nvme-fabrics/ctl/nvme0/reset_controller Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-26drm/i915/dp: Skip the HW readout of DPCD on disabled encodersImre Deak
Reading out the DP encoders' DPCD during booting or resume is only required for enabled encoders: such encoders may be modesetted during the initial commit and the link training this involves depends on an initialized DPCD. For DDI encoders reading out the DPCD is skipped, do the same on pre-DDI platforms. Atm, the first DPCD readout without a sink connected - which is a likely scneario if the encoder is disabled - leaves intel_dp->num_common_rates at 0, which resulted in intel_dp_sync_state()->intel_dp_max_common_rate() in a intel_dp->common_rates[-1] access. This by definition results in an undefined behaviour, though to my best knowledge in all HW/compiler configurations it actually results in accessing the array item type value preceding the array. In this case the preceding value happens to be intel_dp->num_common_rates, which is 0, so this issue - by luck - didn't cause a user visible problem. Nevertheless it's still an undefined behaviour and in CONFIG_UBSAN builds leads to a kernel BUG() (which revealed this problem for us), hence CC:stable. A related problem in case the encoder is enabled but the sink is not connected or the DPCD readout fails is fixed by the next patch. v2: Amend the commit message describing the root cause of the CONFIG_UBSAN BUG(). Fixes: a532cde31de3 ("drm/i915/tc: Fix TypeC port init/resume time sanitization") References: https://gitlab.freedesktop.org/drm/intel/-/issues/4297 Reported-and-tested-by: Mat Jonczyk <mat.jonczyk@o2.pl> Cc: Mat Jonczyk <mat.jonczyk@o2.pl> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-2-imre.deak@intel.com (cherry picked from commit 4ec5ffc341cecbea060739aea1d53398ac2ec3f8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-26drm/i915: Catch yet another unconditioal clflushVille Syrjälä
Replace the unconditional clflush() with drm_clflush_virt_range() which does the wbinvd() fallback when clflush is not available. This time no justification is given for the clflush in the offending commit. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Fixes: 2c8ab3339e39 ("drm/i915: Pin timeline map after first timeline pin, v4.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-4-ville.syrjala@linux.intel.com Reviewed-by: Dave Airlie <airlied@redhat.com> (cherry picked from commit 9ced12182d0d8401d821e9602e56e276459900fc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-26drm/i915: Convert unconditional clflush to drm_clflush_virt_range()Ville Syrjälä
This one is apparently a "clflush for good measure", so bit more justification (if you can call it that) than some of the others. Convert to drm_clflush_virt_range() again so that machines without clflush will survive the ordeal. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@intel.com> #v1 Fixes: 12ca695d2c1e ("drm/i915: Do not share hwsp across contexts any more, v8.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-3-ville.syrjala@linux.intel.com Reviewed-by: Dave Airlie <airlied@redhat.com> (cherry picked from commit af7b6d234eefa30c461cc16912bafb32b9e6141c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-26soc: samsung: exynos-chipid: add exynosautov9 SoC supportChanho Park
The product id of Exynos Auto v9 is "0xAAA8_0000". Add this id and its name. Cc: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20211021012017.158919-2-chanho61.park@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-10-26Revert "tty: hvc: pass DMA capable memory to put_chars()"Greg Kroah-Hartman
This reverts commit 0986d7bc5598f5df30e3db777d00e73890c97627. It still has some issues and needs to be dropped at this point in time. Link: https://lore.kernel.org/r/208f7a41-a9fa-630c-cb44-c37c503f3a72@kernel.org Reported-by: Jiri Slaby <jirislaby@kernel.org> Cc: Xianting Tian <xianting.tian@linux.alibaba.com> Cc: Shile Zhang <shile.zhang@linux.alibaba.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-26Revert "virtio-console: remove unnecessary kmemdup()"Greg Kroah-Hartman
This reverts commit 9db81eca10ba2d84177fa076704db3a5d76863c3. A dependant patch on this one needs to be reverted, so this one also needs to be reverted at this point in time. Link: https://lore.kernel.org/r/208f7a41-a9fa-630c-cb44-c37c503f3a72@kernel.org Reported-by: Jiri Slaby <jirislaby@kernel.org> Cc: Xianting Tian <xianting.tian@linux.alibaba.com> Cc: Shile Zhang <shile.zhang@linux.alibaba.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-26serial: 8250_pci: Replace dev_*() by pci_*() macrosAndy Shevchenko
PCI subsystem provides convenient shortcut macros for message printing. Use those macros instead of dev_*(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jiri Slaby <jslaby@kernel.org> Link: https://lore.kernel.org/r/20211022135147.70965-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-26serial: 8250_pci: Get rid of redundant 'else' keywordAndy Shevchenko
The 'else' keyword is not needed when previous conditional branch returns to the upper layer. Get rid of redundant 'else' keyword in such cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jiri Slaby <jslaby@kernel.org> Link: https://lore.kernel.org/r/20211022135147.70965-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-26serial: 8250_pci: Refactor the loop in pci_ite887x_init()Andy Shevchenko
The loop can be refactored by using ARRAY_SIZE() instead of NULL terminator. This reduces code base and makes it easier to read and understand. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jiri Slaby <jslaby@kernel.org> Link: https://lore.kernel.org/r/20211022135147.70965-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-26dmaengine: sa11x0: Mark PM functions as __maybe_unusedCai Huoqing
Without CONFIG_PM_SLEEP, the runtime suspend/resume functions are unused, producing a warning: ../drivers/dma/sa11x0-dma.c:1042:12: error: 'sa11x0_dma_resume' defined but not used ../drivers/dma/sa11x0-dma.c:1004:12: error: 'sa11x0_dma_suspend' defined but not used Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20211026020508.550-1-caihuoqing@baidu.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26dmaengine: switch from 'pci_' to 'dma_' APIQing Wang
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by: Qing Wang <wangqing@vivo.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/1633663733-47199-7-git-send-email-wangqing@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26dmaengine: ioat: switch from 'pci_' to 'dma_' APIQing Wang
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by: Qing Wang <wangqing@vivo.com> Link: https://lore.kernel.org/r/1633663733-47199-3-git-send-email-wangqing@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26dmaengine: hsu: switch from 'pci_' to 'dma_' APIQing Wang
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by: Qing Wang <wangqing@vivo.com> Link: https://lore.kernel.org/r/1633663733-47199-4-git-send-email-wangqing@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26dmaengine: hisi_dma: switch from 'pci_' to 'dma_' APIQing Wang
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by: Qing Wang <wangqing@vivo.com> Link: https://lore.kernel.org/r/1633663733-47199-5-git-send-email-wangqing@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26dmaengine: dw: switch from 'pci_' to 'dma_' APIQing Wang
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by: Qing Wang <wangqing@vivo.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/1633663733-47199-6-git-send-email-wangqing@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26dmaengine: dw-edma-pcie: switch from 'pci_' to 'dma_' APIWang Qing
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1633663733-47199-2-git-send-email-wangqing@vivo.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-25net: qed_dev: fix check of true !rc expressionJean Sacren
Remove the check of !rc in (!rc && !resc_lock_params.b_granted) since it is always true. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net: qed_ptp: fix check of true !rc expressionJean Sacren
Remove the check of !rc in (!rc && !params.b_granted) since it is always true. We should also use constant 0 for return. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-26tpm_tis_spi: Add missing SPI IDMark Brown
In commit c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries") we added SPI IDs for all the DT aliases to handle the fact that we always use SPI modaliases to load modules even when probed via DT however the mentioned commit missed that the SPI and OF device ID entries did not match and were different and so DT nodes with compatible "tcg,tpm_tis-spi" will not match. Add an extra ID for tpm_tis-spi rather than just fix the existing one since what's currently there is going to be better for anyone actually using SPI IDs to instantiate. Fixes: c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries") Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-10-26tpm: fix Atmel TPM crash caused by too frequent queriesHao Wu
The Atmel TPM 1.2 chips crash with error `tpm_try_transmit: send(): error -62` since kernel 4.14. It is observed from the kernel log after running `tpm_sealdata -z`. The error thrown from the command is as follows ``` $ tpm_sealdata -z Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl, code=0087 (135), I/O error ``` The issue was reproduced with the following Atmel TPM chip: ``` $ tpm_version T0 TPM 1.2 Version Info: Chip Version: 1.2.66.1 Spec Level: 2 Errata Revision: 3 TPM Vendor ID: ATML TPM Version: 01010000 Manufacturer Info: 41544d4c ``` The root cause of the issue is due to the TPM calls to msleep() were replaced with usleep_range() [1], which reduces the actual timeout. Via experiments, it is observed that the original msleep(5) actually sleeps for 15ms. Because of a known timeout issue in Atmel TPM 1.2 chip, the shorter timeout than 15ms can cause the error described above. A few further changes in kernel 4.16 [2] and 4.18 [3, 4] further reduced the timeout to less than 1ms. With experiments, the problematic timeout in the latest kernel is the one for `wait_for_tpm_stat`. To fix it, the patch reverts the timeout of `wait_for_tpm_stat` to 15ms for all Atmel TPM 1.2 chips, but leave it untouched for Ateml TPM 2.0 chip, and chips from other vendors. As explained above, the chosen 15ms timeout is the actual timeout before this issue introduced, thus the old value is used here. Particularly, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 14700us, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 15000us according to the existing TPM_TIMEOUT_RANGE_US (300us). The fixed has been tested in the system with the affected Atmel chip with no issues observed after boot up. References: [1] 9f3fc7bcddcb tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers [2] cf151a9a44d5 tpm: reduce tpm polling delay in tpm_tis_core [3] 59f5a6b07f64 tpm: reduce poll sleep time in tpm_transmit() [4] 424eaf910c32 tpm: reduce polling time to usecs for even finer granularity Fixes: 9f3fc7bcddcb ("tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers") Link: https://patchwork.kernel.org/project/linux-integrity/patch/20200926223150.109645-1-hao.wu@rubrik.com/ Signed-off-by: Hao Wu <hao.wu@rubrik.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-10-26tpm: Check for integer overflow in tpm2_map_response_body()Dan Carpenter
The "4 * be32_to_cpu(data->count)" multiplication can potentially overflow which would lead to memory corruption. Add a check for that. Cc: stable@vger.kernel.org Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-10-26tpm: tis: Kconfig: Add helper dependency on COMPILE_TESTCai Huoqing
COMPILE_TEST is helpful to find compilation errors in other platform(e.g.X86). In this case, the support of COMPILE_TEST is added, so this module could be compiled in other platform(e.g.X86), without ARCH_SYNQUACER configuration. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-10-25mlxsw: pci: Recycle received packet upon allocation failureIdo Schimmel
When the driver fails to allocate a new Rx buffer, it passes an empty Rx descriptor (contains zero address and size) to the device and marks it as invalid by setting the skb pointer in the descriptor's metadata to NULL. After processing enough Rx descriptors, the driver will try to process the invalid descriptor, but will return immediately seeing that the skb pointer is NULL. Since the driver no longer passes new Rx descriptors to the device, the Rx queue will eventually become full and the device will start to drop packets. Fix this by recycling the received packet if allocation of the new packet failed. This means that allocation is no longer performed at the end of the Rx routine, but at the start, before tearing down the DMA mapping of the received packet. Remove the comment about the descriptor being zeroed as it is no longer correct. This is OK because we either use the descriptor as-is (when recycling) or overwrite its address and size fields with that of the newly allocated Rx buffer. The issue was discovered when a process ("perf") consumed too much memory and put the system under memory pressure. It can be reproduced by injecting slab allocation failures [1]. After the fix, the Rx queue no longer comes to a halt. [1] # echo 10 > /sys/kernel/debug/failslab/times # echo 1000 > /sys/kernel/debug/failslab/interval # echo 100 > /sys/kernel/debug/failslab/probability FAULT_INJECTION: forcing a failure. name failslab, interval 1000, probability 100, space 0, times 8 [...] Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 should_fail.cold+0x32/0x37 should_failslab+0x5/0x10 kmem_cache_alloc_node+0x23/0x190 __alloc_skb+0x1f9/0x280 __netdev_alloc_skb+0x3a/0x150 mlxsw_pci_rdq_skb_alloc+0x24/0x90 mlxsw_pci_cq_tasklet+0x3dc/0x1200 tasklet_action_common.constprop.0+0x9f/0x100 __do_softirq+0xb5/0x252 irq_exit_rcu+0x7a/0xa0 common_interrupt+0x83/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 RIP: 0010:cpuidle_enter_state+0xc8/0x340 [...] mlxsw_spectrum2 0000:06:00.0: Failed to alloc skb for RDQ Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20211024064014.1060919-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25drm/amd/display: Add DP 2.0 MST DM SupportBhawanpreet Lakha
[Why] Add DP2 MST and debugfs support [How] Update the slot info based on the link encoding format Reviewed-by: "Lin, Wayne" <Wayne.Lin@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-5-lyude@redhat.com
generated by cgit (git 2.34.1) at 2025-09-19 06:55:03 +0000