summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-06-18habanalabs/gaudi: send hard reset cause to prebootKoby Elbaz
LKD should provide hard reset cause to preboot prior to loading any FW components (in case needed). Current implementation is based on the new FW 'COMMS' protocol In cased 'COMMS' is disabled - reset cause won't be sent. Currently, only 2 reset causes are shared: HEARTBEAT & TDR. Sending the reset cause will provide the missing watchdog info that the firmware needs to provide to the BMC. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: notify before f/w loadingOded Gabbay
An information print notifying on starting to load the f/w was removed by mistake when moving to the new dynamic f/w loading mechanism. Restore that print as the F/W loading usually takes between 10 to 20 seconds and this print helps the user know the status of the driver load. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs/gaudi: use scratchpad regs instead of GIC controllerKoby Elbaz
Due to new security restrictions, GIC controller can no longer be accessed from user/kernel. To monitor that, a new status bit will be read from preboot caps, indicating whether direct access to GIC is blocked. In case it is blocked, driver will use scratchpad registers instead of using GIC interface on two main scenarios: The first of which LKD triggers interrupts to F/W through GIC, and the second of when LKD configures all engines/QMANs to write to GIC when they want to report an error. From F/W perspective, it will poll on all SPs, and once IRQ number is retrieved, SP register is cleared, and it will perform the write to the GIC to trigger the IRQ handler. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: read f/w's 2-nd sts and err registersOhad Sharabi
Maintain both STS1 and ERR1 registers used for status communication with F/W. Those are not maintained as we currently have less than 31 statuses/error defined and so LKD did not refer to those register. The reason to read them now is to try to support future f/w versions with current driver. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: avoid using uninitialized pointerOhad Sharabi
When attempting to read FW component's version we should break if input FW component is invalid in order to avoid using uninitialized destination pointer. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: set dma mask from fw once fw done iatu configOhad Sharabi
When setting "DMA mask from FW" we are reading PSOC_GLOBAL_CONF register which is allowed only once FW has done it's iATU configuration. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: better error print for pin failureOded Gabbay
Print the user given pointer and error code on failure to get user pages for easier debugging. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: add missing space after castingOmer Shpigelman
Change casting code according to kernel coding style. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: ignore device unusable statusOded Gabbay
Some users might want to implement their own policy of when the device is unusable so we need to ignore this status in the driver and continue loading as normal. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: load linux image to deviceOhad Sharabi
Implementing dynamic linux image load to the device. This patch also implements the FW communication steps during the boot-fit. This patch also enables the dynamic protocol based on the compatibility flag. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: load boot fit to deviceOhad Sharabi
Implementing dynamic boot fit image load to the device. Note that some necessary adjustment were added to the static loader as well so that both loaders can co-exist. as this is not the final FW load stage the dynamic FW load is still forced to be non functional. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: use dev_dbg upon hint address failureOded Gabbay
Hint address failure that results in a valid mapping with an address that was allocated by the driver is not a real failure. Therefore, the driver shouldn't notify about this in kernel log. The user is responsible to check the returned address. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: modify progress status messagesGuy Nisan
Indicate "progress" instead of "error" when reporting progress status. Change "u-boot stopped by user" to "Cannot boot" message as CPU_BOOT_STATUS_UBOOT_NOT_READY may indicate a fatal error that prevent u-boot from loading firmware. Signed-off-by: Guy Nisan <gnisan@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: give FW a grace time for configuring iATUOfir Bitton
iATU (internal Address Translation Unit of the PCI controller) configuration is being done by FW right after driver enables the PCI device. Hence, driver must add a minor sleep afterwards in order to make sure FW finishes configuring iATU regions. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: update to latest f/w headersOded Gabbay
Update the common and GAUDI firmware header files to the latest version. The latest version use the correct endianness types so this commit also contains minor changes to the code to use the correct conversions when reading/writing to the firmware structures. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: expose ASIC specific PCI info to common codeOhad Sharabi
LKD has interfaces in which it receives device address. For instance the debugfs_read/write variants receives device address for CFG/SRAM/DRAM for read/write and need to translate to the mapped PCI BAR address. In addition, the dynamic FW load protocol dictates that the address to which the LKD will copy the image for the next FW component will be received as a device address and can be placed either in SRAM or DRAM. We need to distinguish those regions as the access methods to those regions are different (in DRAM we possibly need to set the BAR base). Looking forward this code will be used to remove duplicated code in the debugfs_read/write that search the memory region for the input device address. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: dynamic fw load reset protocolOhad Sharabi
First stage of the dynamic FW load protocol is to reset the protocol to avoid residues from former load cycles. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: use common fw_version readOhad Sharabi
Instead of using multiple ASIC specific copies of functions to read the FW version use single common one that gets ASIC specific arguments. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: use mmu cache range invalidationAlon Mizrahi
Use mmu cache range invalidation instead of entire cache invalidation because it yields better performance. In GOYA and GAUDI, always use entire cache invalidation because these ASICs don't support range invalidation. Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: refactor init device cpu codeOhad Sharabi
Replace multiple arguments to init device CPU function by passing firmware loader managing structure that is initialized per ASIC with the loader parameters. In addition, the FW loader management structure is now part of the habanalabs device, this way the loader parameters will be able to be communicated across various boot stages. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: request f/w in separate functionOhad Sharabi
This refactor is needed due to the dynamic FW load in which requesting the FW file (and getting its attributes) is not immediately followed by copying FW file content. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: prepare preboot stage to dynamic f/w loadOhad Sharabi
Start the skeleton for the dynamic F/W load by marking current preboot code path as legacy. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: update firmware files to latestOded Gabbay
Update the firmware files to the latest from the firmware team. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: increase ELBI reset timeout for PLDMMoti Haimovski
On PLDM, in case of NIC hangs, the ELBI reset to take much longer than expected. As a result an increase in the ELBI reset timeout is required. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18tty: serial: Add UART driver for Cortina-Access platformJason Li
This driver supports Cortina Access UART IP integrated in most all CAXXXX line of SoCs. Earlycom is also supported Signed-off-by: Jason Li <jason.li@cortina-access.com> Link: https://lore.kernel.org/r/20210615165750.31261-1-alex.nemirovsky@cortina-access.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: introduce mxser_16550A_or_MUST helperJiri Slaby
This check is used in the code on many places. Either in positive or negative form. So introduce a helper called mxser_16550A_or_MUST for this purpose. And replace all the occurrences. This simplifies many ifs in there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-67-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: rename flags to old_speed in mxser_set_serial_infoJiri Slaby
Local 'flags' are used to store speed in mxser_set_serial_info, not actual flags (by doing & ASYNC_SPD_MASK). So rename 'flags' to 'old_speed' (after what it is). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-66-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: use port variable in mxser_set_serial_infoJiri Slaby
mxser_set_serial_info already defined a local 'port' of type struct tty_port. So use it in the code everywhere. This eliminates some text from the code there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-65-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: access info->MCR under info->slockJiri Slaby
info->MCR is protected by info->slock all over the code. Extend the lock in mxser_tiocmget around the info->MCR fetch too. It likely doesn't change anything, but it's always good to be consistent. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-64-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: fix typos around enhanced modeJiri Slaby
Fix spelling of "enhanced" in macros and comments around them. While "enchance" comes from the original Moxa's driver, I don't think it was meant to be that. From the context, they obviously mean "enhanced". Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-63-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: decrypt FCR valuesJiri Slaby
Currently, some of the values written to FCR are magic constants. But they are composed of well-defined bits. Use these named macros in place of the constants. No changes in objdump -d. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-62-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: remove xmit_cnt < 0 testsJiri Slaby
mxser_port::xmit_cnt is unsigned, it cannot be negative. Therefore remove all the xmit_cnt < 0 tests. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-61-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: introduce and use start/stop_tx helpersJiri Slaby
Starting and stopping TX is performed on many places in the driver. It is repeated outb and info->IER modification. Create few helpers (__mxser_start_tx, mxser_start_tx, __mxser_stop_tx) and use them in the code instead of open coding. This should be a base for an uart driver for this device in the future. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-60-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: extract and dedup CTS handlingJiri Slaby
CTS is handled on two locations in mxser. Extract the code into separation function mxser_handle_cts. And call it from the two locations. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-59-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: don't start TX from tty_operations::put_charJiri Slaby
TX is not supposed to be started from tty_operations::put_char. Line disciplines ought to call tty_operations::put_char several times and then do a single tty_operations::flush_chars to start TX. Fix this in mxser by removing TX startup from mxser_put_char. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-58-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: cleanup mxser_dtr_rtsJiri Slaby
mxser_dtr_rts now does all inb, outb, & or | in a single statement. The code is hard to follow, so make it more readable by doing one-line = one-statement. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-57-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: cleanup mxser_rs_breakJiri Slaby
mxser_rs_break now does all inb, outb, & or | in a single statement. The code is hard to follow, so make it more readable by doing one-line = one-statement. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-56-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: remove pointless ioaddr checksJiri Slaby
struct mxser_port::ioaddr can never be NULL once set in ->probe. Hence the checks for it are pointless. Remove them. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-55-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: alloc only needed # of portsJiri Slaby
Many boards have only 2 ports. But we always allocate 8 ports (struct mxser_port) in each struct mxser_board. Switch this to an empty/variable sized array ([]) and allocate the needed number of ports using struct_size helper in ->probe. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-54-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: alloc struct mxser_board dynamicallyJiri Slaby
There is no need to preallocate an array of four struct mxser_board's. In most cases a single board or two will be present in a machine. So allocate struct mxser_board as needed in ->probe. This makes mxser_boards a bit array. There we store which indexes are free (unallocated). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-53-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: make mxser_board::idx really an indexJiri Slaby
mxser_board::idx is named as index, but actually contain a base. So assign index there. And for base, introduce a local variable. This is needed for the next patch (use index as a bit index). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-52-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: rework and simplify mxser_openJiri Slaby
In mxser_open, tty->port is already set thanks to tty_port_register_device in ->probe. So we can simply use container_of to deduce the struct mxser_port's pointer. Thus avoiding divisions and complex computations. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-51-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: cleanup mxser_process_txrx_fifoJiri Slaby
Rename process_txrx_fifo to mxser_process_txrx_fifo and: * remove useless parentheses * return from the 'if's true branch and process the rest in normal code flow (shift the code one level left) All this to make the code more readable. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-50-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: remove mxser_cardinfoJiri Slaby
Now that mxser_cards array (of struct mxser_cardinfo) contains only port count and a quirk, we can encode these two directly into pci_device_id::driver_data. And we can remove this struct completely. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-49-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: remove info message from probeJiri Slaby
There is a dev_info in ->probe which prints device's name, bus and slot numbers. All these can be fetched from the lspci output. So remove this useless print. This eliminates the whole mxser_cardinfo::name field. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-48-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: move request irq to probe and switch to managedJiri Slaby
Move request_irq from mxser_initbrd to mxser_probe so that we can switch it to managed request. It simplifies the cleanup code. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-47-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: pci, switch to managed resourcesJiri Slaby
Switch to managed resources for PCI using pcim_enable_device. Regions and device disabling is now taken care of by the core and we need not unwind. Neither in ->probe, nor in ->remove. That simplifies the code. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-46-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: inline mxser_board_remove into mxser_removeJiri Slaby
The only user of mxser_board_remove is mxser_remove. Move there those few lines. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-45-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: move board init into mxser_initbrdJiri Slaby
What's done in ->probe for board is actually its initialization. So move it to mxser_initbrd where it belongs. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-44-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18mxser: clean up the rest of MUST helpersJiri Slaby
Clean up the rest of MUST helpers. They all can use the newly added mxser_must_set_EFR. And passing a bool instead of having two functions (_enable+_disable) simplifies the code a lot too. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210618061516.662-43-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-23 06:14:24 +0000