summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-02-18ice: check the return of ice_ptp_gettimex64Tom Rix
Clang static analysis reports this issue time64.h:69:50: warning: The left operand of '+' is a garbage value set_normalized_timespec64(&ts_delta, lhs.tv_sec + rhs.tv_sec, ~~~~~~~~~~ ^ In ice_ptp_adjtime_nonatomic(), the timespec64 variable 'now' is set by ice_ptp_gettimex64(). This function can fail with -EBUSY, so 'now' can have a gargbage value. So check the return. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Signed-off-by: Tom Rix <trix@redhat.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-18ice: fix concurrent reset and removal of VFsJacob Keller
Commit c503e63200c6 ("ice: Stop processing VF messages during teardown") introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is intended to prevent some issues with concurrently handling messages from VFs while tearing down the VFs. This change was motivated by crashes caused while tearing down and bringing up VFs in rapid succession. It turns out that the fix actually introduces issues with the VF driver caused because the PF no longer responds to any messages sent by the VF during its .remove routine. This results in the VF potentially removing its DMA memory before the PF has shut down the device queues. Additionally, the fix doesn't actually resolve concurrency issues within the ice driver. It is possible for a VF to initiate a reset just prior to the ice driver removing VFs. This can result in the remove task concurrently operating while the VF is being reset. This results in similar memory corruption and panics purportedly fixed by that commit. Fix this concurrency at its root by protecting both the reset and removal flows using the existing VF cfg_lock. This ensures that we cannot remove the VF while any outstanding critical tasks such as a virtchnl message or a reset are occurring. This locking change also fixes the root cause originally fixed by commit c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we can simply revert it. Note that I kept these two changes together because simply reverting the original commit alone would leave the driver vulnerable to worse race conditions. Fixes: c503e63200c6 ("ice: Stop processing VF messages during teardown") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-18ice: fix setting l4 port flag when adding filterMichal Swiatkowski
Accidentally filter flag for none encapsulated l4 port field is always set. Even if user wants to add encapsulated l4 port field. Remove this unnecessary flag setting. Fixes: 9e300987d4a81 ("ice: VXLAN and Geneve TC support") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-18ice: Match on all profiles in slow-pathWojciech Drewek
In switchdev mode, slow-path rules need to match all protocols, in order to correctly redirect unfiltered or missed packets to the uplink. To set this up for the virtual function to uplink flow, the rule that redirects packets to the control VSI must have the tunnel type set to ICE_SW_TUN_AND_NON_TUN. As a result of that new tunnel type being set, ice_get_compat_fv_bitmap will select ICE_PROF_ALL. At that point all profiles would be selected for this rule, resulting in the desired behavior. Without this change slow-path would not work with tunnel protocols. Fixes: 8b032a55c1bd ("ice: low level support for tunnels") Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-18Merge branch 'acpi-processor'Rafael J. Wysocki
Merge fix for a recent boot lockup regression on 32-bit ThinkPad T40. * acpi-processor: ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40
2022-02-18Merge tag 'mtd/fixes-for-5.17-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "MTD changes: - Qcom: - Don't print error message on -EPROBE_DEFER - Fix kernel panic on skipped partition - Fix missing free for pparts in cleanup - phram: Prevent divide by zero bug in phram_setup() Raw NAND controller changes: - ingenic: Fix missing put_device in ingenic_ecc_get - qcom: Fix clock sequencing in qcom_nandc_probe() - omap2: Prevent invalid configuration and build error - gpmi: Don't leak PM reference in error path - brcmnand: Fix incorrect sub-page ECC status" * tag 'mtd/fixes-for-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status mtd: rawnand: gpmi: don't leak PM reference in error path mtd: phram: Prevent divide by zero bug in phram_setup() mtd: rawnand: omap2: Prevent invalid configuration and build error mtd: parsers: qcom: Fix missing free for pparts in cleanup mtd: parsers: qcom: Fix kernel panic on skipped partition mtd: parsers: qcom: Don't print error message on -EPROBE_DEFER mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe() mtd: rawnand: ingenic: Fix missing put_device in ingenic_ecc_get
2022-02-18Merge tag 'block-5.17-2022-02-17' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Surprise removal fix (Christoph) - Ensure that pages are zeroed before submitted for userspace IO (Haimin) - Fix blk-wbt accounting issue with BFQ (Laibin) - Use bsize for discard granularity in loop (Ming) - Fix missing zone handling in blk_complete_request() (Pankaj) * tag 'block-5.17-2022-02-17' of git://git.kernel.dk/linux-block: block/wbt: fix negative inflight counter when remove scsi device block: fix surprise removal for drivers calling blk_set_queue_dying block-map: add __GFP_ZERO flag for alloc_page in function bio_copy_kern block: loop:use kstatfs.f_bsize of backing file to set discard granularity block: Add handling for zone append command in blk_complete_request
2022-02-18Merge tag 'sound-5.17-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small patches, mostly for old and new regressions and device-specific fixes. - Regression fixes regarding ALSA core SG-buffer helpers - Regression fix for Realtek HD-audio mutex deadlock - Regression fix for USB-audio PM resume error - More coverage of ASoC core control API notification fixes - Old regression fixes for HD-audio probe mask - Fixes for ASoC Realtek codec work handling - Other device-specific quirks / fixes" * tag 'sound-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ASoC: intel: skylake: Set max DMA segment size ASoC: SOF: hda: Set max DMA segment size ALSA: hda: Set max DMA segment size ALSA: hda/realtek: Fix deadlock by COEF mutex ALSA: usb-audio: Don't abort resume upon errors ALSA: hda: Fix missing codec probe on Shenker Dock 15 ALSA: hda: Fix regression on forced probe mask option ALSA: hda/realtek: Add quirk for Legion Y9000X 2019 ALSA: usb-audio: revert to IMPLICIT_FB_FIXED_DEV for M-Audio FastTrack Ultra ASoC: wm_adsp: Correct control read size when parsing compressed buffer ASoC: qcom: Actually clear DMA interrupt register for HDMI ALSA: memalloc: invalidate SG pages before sync ALSA: memalloc: Fix dma_need_sync() checks MAINTAINERS: update cros_ec_codec maintainers ASoC: rt5682: do not block workqueue if card is unbound ASoC: rt5668: do not block workqueue if card is unbound ASoC: rt5682s: do not block workqueue if card is unbound ASoC: tas2770: Insert post reset delay ASoC: Revert "ASoC: mediatek: Check for error clk pointer" ASoC: amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine driver ...
2022-02-18Merge tag 'scmi-fix-5.17' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fix for v5.17 A simple fix to remove space in the MODULE_ALIAS name used in the SCMI driver as userspace expect no spaces in these names. * tag 'scmi-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Remove space in MODULE_ALIAS name Link: https://lore.kernel.org/r/20220214144245.2376150-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-18Merge tag 'optee-fix2-for-v5.17' of ↵Arnd Bergmann
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes OP-TEE fix error return code in probe functions * tag 'optee-fix2-for-v5.17' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: fix error return code in probe function Link: https://lore.kernel.org/r/20220214125931.GA1332792@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-18RDMA/rtrs-clt: Move free_permit from free_clt to rtrs_clt_closeMd Haris Iqbal
Error path of rtrs_clt_open() calls free_clt(), where free_permit is called. This is wrong since error path of rtrs_clt_open() does not need to call free_permit(). Also, moving free_permits() call to rtrs_clt_close(), makes it more aligned with the call to alloc_permit() in rtrs_clt_open(). Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20220217030929.323849-2-haris.iqbal@ionos.com Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-02-18RDMA/rtrs-clt: Fix possible double free in error caseMd Haris Iqbal
Callback function rtrs_clt_dev_release() for put_device() calls kfree(clt) to free memory. We shouldn't call kfree(clt) again, and we can't use the clt after kfree too. Replace device_register() with device_initialize() and device_add() so that dev_set_name can() be used appropriately. Move mutex_destroy() to the release function so it can be called in the alloc_clt err path. Fixes: eab098246625 ("RDMA/rtrs-clt: Refactor the failure cases in alloc_clt") Link: https://lore.kernel.org/r/20220217030929.323849-1-haris.iqbal@ionos.com Reported-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-02-18net: ll_temac: check the return value of devm_kmalloc()Xiaoke Wang
devm_kmalloc() returns a pointer to allocated memory on success, NULL on failure. While lp->indirect_lock is allocated by devm_kmalloc() without proper check. It is better to check the value of it to prevent potential wrong memory access. Fixes: f14f5c11f051 ("net: ll_temac: Support indirect_mutex share within TEMAC IP") Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18sr9700: sanity check for packet lengthOliver Neukum
A malicious device can leak heap data to user space providing bogus frame lengths. Introduce a sanity check. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()Duoming Zhou
When a 6pack device is detaching, the sixpack_close() will act to cleanup necessary resources. Although del_timer_sync() in sixpack_close() won't return if there is an active timer, one could use mod_timer() in sp_xmit_on_air() to wake up timer again by calling userspace syscall such as ax25_sendmsg(), ax25_connect() and ax25_ioctl(). This unexpected waked handler, sp_xmit_on_air(), realizes nothing about the undergoing cleanup and may still call pty_write() to use driver layer resources that have already been released. One of the possible race conditions is shown below: (USE) | (FREE) ax25_sendmsg() | ax25_queue_xmit() | ... | sp_xmit() | sp_encaps() | sixpack_close() sp_xmit_on_air() | del_timer_sync(&sp->tx_t) mod_timer(&sp->tx_t,...) | ... | unregister_netdev() | ... (wait a while) | tty_release() | tty_release_struct() | release_tty() sp_xmit_on_air() | tty_kref_put(tty_struct) //FREE pty_write(tty_struct) //USE | ... The corresponding fail log is shown below: =============================================================== BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470 Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0 ... Call Trace: ... queue_work_on+0x3f/0x50 pty_write+0xcd/0xe0pty_write+0xcd/0xe0 sp_xmit_on_air+0xb2/0x1f0 call_timer_fn+0x28/0x150 __run_timers.part.0+0x3c2/0x470 run_timer_softirq+0x3b/0x80 __do_softirq+0xf1/0x380 ... This patch reorders the del_timer_sync() after the unregister_netdev() to avoid UAF bugs. Because the unregister_netdev() is well synchronized, it flushs out any pending queues, waits the refcount of net_device decreases to zero and removes net_device from kernel. There is not any running routines after executing unregister_netdev(). Therefore, we could not arouse timer from userspace again. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18i2c: brcmstb: fix support for DSL and CM variantsRafał Miłecki
DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup. Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-02-18drm/imx/dcss: i.MX8MQ DCSS select DRM_GEM_CMA_HELPERRudi Heitbaum
Without DRM_GEM_CMA_HELPER i.MX8MQ DCSS won't build. This needs to be there. Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220216212228.1217831-1-rudi@heitbaum.com
2022-02-18ARM: dts: Use 32KiHz oscillator on devkit8000Anthoine Bourgeois
Devkit8000 board seems to always used 32k_counter as clocksource. Restore this behavior. If clocksource is back to 32k_counter, timer12 is now the clockevent source (as before) and timer2 is not longer needed here. This commit fixes the same issue observed with commit 23885389dbbb ("ARM: dts: Fix timer regression for beagleboard revision c") when sleep is blocked until hitting keys over serial console. Fixes: aba1ad05da08 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-02-17clk: jz4725b: fix mmc0 clock gatingSiarhei Volkau
The mmc0 clock gate bit was mistakenly assigned to "i2s" clock. You can find that the same bit is assigned to "mmc0" too. It leads to mmc0 hang for a long time after any sound activity also it prevented PM_SLEEP to work properly. I guess it was introduced by copy-paste from jz4740 driver where it is really controls I2S clock gate. Fixes: 226dfa4726eb ("clk: Add Ingenic jz4725b CGU driver") Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Tested-by: Siarhei Volkau <lis8215@gmail.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220205171849.687805-2-lis8215@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: qcom: gcc-msm8994: Remove NoC clocksKonrad Dybcio
Just like in commit 05cf3ec00d46 ("clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk") adding NoC clocks turned out to be a huge mistake, as they cause a lot of issues at little benefit (basically letting Linux know about their children's frequencies), especially when mishandled or misconfigured. Adding these ones broke SDCC approx 99 out of 100 times, but that somehow went unnoticed. To prevent further issues like this one, remove them. This commit is effectively a revert of 74a33fac3aab ("clk: qcom: gcc-msm8994: Add missing NoC clocks") with ABI preservation. Fixes: 74a33fac3aab ("clk: qcom: gcc-msm8994: Add missing NoC clocks") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220217232408.78932-1-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17of/fdt: move elfcorehdr reservation early for crash dump kernelNikhil Gupta
elfcorehdr_addr is fixed address passed to Second kernel which may be conflicted with potential reserved memory in Second kernel,so fdt_reserve_elfcorehdr() ahead of fdt_init_reserved_mem() can relieve this situation. Signed-off-by: Nikhil Gupta <nikhil.gupta@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220128042321.15228-1-nikhil.gupta@nxp.com
2022-02-17Merge tag 'drm-fixes-2022-02-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular fixes for rc5, nothing really stands out, mostly some amdgpu and i915 fixes with mediatek, radeon and some misc fixes. cma-helper: - set VM_DONTEXPAND atomic: - error handling fix mediatek: - fix probe defer loop with external bridge amdgpu: - Stable pstate clock fixes for Dimgrey Cavefish and Beige Goby - S0ix SDMA fix - Yellow Carp GPU reset fix radeon: - Backlight fix for iMac 12,1 i915: - GVT kerneldoc cleanup. - GVT Kconfig should depend on X86 - Prevent out of range access in SWSCI display code - Fix mbus join and dbuf slice config lookup - Fix inverted priority selection in the TTM backend - Fix FBC plane end Y offset check" * tag 'drm-fixes-2022-02-18' of git://anongit.freedesktop.org/drm/drm: drm/atomic: Don't pollute crtc_state->mode_blob with error pointers drm/radeon: Fix backlight control on iMac 12,1 drm/amd/pm: correct the sequence of sending gpu reset msg drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix. drm/amd/pm: correct UMD pstate clocks for Dimgrey Cavefish and Beige Goby drm/i915/fbc: Fix the plane end Y offset check drm/i915/opregion: check port number bounds for SWSCI display power state drm/i915/ttm: tweak priority hint selection drm/i915: Fix mbus join config lookup drm/i915: Fix dbuf slice config lookup drm/cma-helper: Set VM_DONTEXPAND for mmap drm/mediatek: mtk_dsi: Avoid EPROBE_DEFER loop with external bridge drm/i915/gvt: Make DRM_I915_GVT depend on X86 drm/i915/gvt: clean up kernel-doc in gtt.c
2022-02-18Merge tag 'drm-intel-fixes-2022-02-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - GVT kerneldoc cleanup. (Randy Dunlap) - GVT Kconfig should depend on X86. (Siva Mullati) - Prevent out of range access in SWSCI display code. (Jani Nikula) - Fix mbus join and dbuf slice config lookup. (Ville Syrjälä) - Fix inverted priority selection in the TTM backend. (Matthew Auld) - Fix FBC plane end Y offset check. (Ville Syrjälä) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yg4lA6k8+xp8u3aB@tursulin-mobl2
2022-02-18Merge tag 'drm-misc-fixes-2022-02-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * drm/cma-helper: Set VM_DONTEXPAND * drm/atomic: Fix error handling in drm_atomic_set_mode_for_crtc() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Yg4mzQALMX69UmA3@linux-uq9g
2022-02-17Merge tag 'net-5.17-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. Current release - regressions: - dsa: lantiq_gswip: fix use after free in gswip_remove() - smc: avoid overwriting the copies of clcsock callback functions Current release - new code bugs: - iwlwifi: - fix use-after-free when no FW is present - mei: fix the pskb_may_pull check in ipv4 - mei: retry mapping the shared area - mvm: don't feed the hardware RFKILL into iwlmei Previous releases - regressions: - ipv6: mcast: use rcu-safe version of ipv6_get_lladdr() - tipc: fix wrong publisher node address in link publications - iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW assertion - bgmac: make idm and nicpm resource optional again - atl1c: fix tx timeout after link flap Previous releases - always broken: - vsock: remove vsock from connected table when connect is interrupted by a signal - ping: change destination interface checks to match raw sockets - crypto: af_alg - get rid of alg_memory_allocated to avoid confusing semantics (and null-deref) after SO_RESERVE_MEM was added - ipv6: make exclusive flowlabel checks per-netns - bonding: force carrier update when releasing slave - sched: limit TC_ACT_REPEAT loops - bridge: multicast: notify switchdev driver whenever MC processing gets disabled because of max entries reached - wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found - iwlwifi: fix locking when "HW not ready" - phy: mediatek: remove PHY mode check on MT7531 - dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN - dsa: lan9303: - fix polarity of reset during probe - fix accelerated VLAN handling" * tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) bonding: force carrier update when releasing slave nfp: flower: netdev offload check for ip6gretap ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt ipv4: fix data races in fib_alias_hw_flags_set net: dsa: lan9303: add VLAN IDs to master device net: dsa: lan9303: handle hwaccel VLAN tags vsock: remove vsock from connected table when connect is interrupted by a signal Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname" ping: fix the dif and sdif check in ping_lookup net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990 net: sched: limit TC_ACT_REPEAT loops tipc: fix wrong notification node addresses net: dsa: lantiq_gswip: fix use after free in gswip_remove() ipv6: per-netns exclusive flowlabel checks net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled CDC-NCM: avoid overflow in sanity checking mctp: fix use after free net: mscc: ocelot: fix use-after-free in ocelot_vlan_del() bonding: fix data-races around agg_select_timer dpaa2-eth: Initialize mutex used in one step timestamping path ...
2022-02-17bonding: force carrier update when releasing slaveZhang Changzhong
In __bond_release_one(), bond_set_carrier() is only called when bond device has no slave. Therefore, if we remove the up slave from a master with two slaves and keep the down slave, the master will remain up. Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond)) statement. Reproducer: $ insmod bonding.ko mode=0 miimon=100 max_bonds=2 $ ifconfig bond0 up $ ifenslave bond0 eth0 eth1 $ ifconfig eth0 down $ ifenslave -d bond0 eth1 $ cat /proc/net/bonding/bond0 Fixes: ff59c4563a8d ("[PATCH] bonding: support carrier state for master") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17nfp: flower: netdev offload check for ip6gretapDanie du Toit
IPv6 GRE tunnels are not being offloaded, this is caused by a missing netdev offload check. The functionality of IPv6 GRE tunnel offloading was previously added but this check was not included. Adding the ip6gretap check allows IPv6 GRE tunnels to be offloaded correctly. Fixes: f7536ffb0986 ("nfp: flower: Allow ipv6gretap interface for offloading") Signed-off-by: Danie du Toit <danie.dutoit@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220217124820.40436-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rtEric Dumazet
Because fib6_info_hw_flags_set() is called without any synchronization, all accesses to gi6->offload, fi->trap and fi->offload_failed need some basic protection like READ_ONCE()/WRITE_ONCE(). BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt read to 0xffff8881087d5886 of 1 bytes by task 13953 on cpu 0: fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1007 [inline] fib6_purge_rt+0x4f/0x580 net/ipv6/ip6_fib.c:1033 fib6_del_route net/ipv6/ip6_fib.c:1983 [inline] fib6_del+0x696/0x890 net/ipv6/ip6_fib.c:2028 __ip6_del_rt net/ipv6/route.c:3876 [inline] ip6_del_rt+0x83/0x140 net/ipv6/route.c:3891 __ipv6_dev_ac_dec+0x2b5/0x370 net/ipv6/anycast.c:374 ipv6_dev_ac_dec net/ipv6/anycast.c:387 [inline] __ipv6_sock_ac_close+0x141/0x200 net/ipv6/anycast.c:207 ipv6_sock_ac_close+0x79/0x90 net/ipv6/anycast.c:220 inet6_release+0x32/0x50 net/ipv6/af_inet6.c:476 __sock_release net/socket.c:650 [inline] sock_close+0x6c/0x150 net/socket.c:1318 __fput+0x295/0x520 fs/file_table.c:280 ____fput+0x11/0x20 fs/file_table.c:313 task_work_run+0x8e/0x110 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x160/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1: fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230 nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline] nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline] nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline] nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline] nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x22 -> 0x2a Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events nsim_fib_event_work Fixes: 0c5fcf9e249e ("IPv6: Add "offload failed" indication to routes") Fixes: bb3c4ab93e44 ("ipv6: Add "offload" and "trap" indications to routes") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Amit Cohen <amcohen@nvidia.com> Cc: Ido Schimmel <idosch@nvidia.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17net: dsa: lan9303: add VLAN IDs to master deviceMans Rullgard
If the master device does VLAN filtering, the IDs used by the switch must be added for any frames to be received. Do this in the port_enable() function, and remove them in port_disable(). Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220216204818.28746-1-mans@mansr.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"Jonas Gorski
This reverts commit 3710e80952cf2dc48257ac9f145b117b5f74e0a5. Since idm_base and nicpm_base are still optional resources not present on all platforms, this breaks the driver for everything except Northstar 2 (which has both). The same change was already reverted once with 755f5738ff98 ("net: broadcom: fix a mistake about ioremap resource"). So let's do it again. Fixes: 3710e80952cf ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [florian: Added comments to explain the resources are optional] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17drm/vc4: crtc: Fix runtime_pm reference countingMaxime Ripard
At boot on the BCM2711, if the HDMI controllers are running, the CRTC driver will disable itself and its associated HDMI controller to work around a hardware bug that would leave some pixels stuck in a FIFO. In order to avoid that issue, we need to run some operations in lockstep between the CRTC and HDMI controller, and we need to make sure the HDMI controller will be powered properly. However, since we haven't enabled it through KMS, the runtime_pm state is off at this point so we need to make sure the device is powered through pm_runtime_resume_and_get, and once the operations are complete, we call pm_runtime_put. However, the HDMI controller will do that itself in its post_crtc_powerdown, which means we'll end up calling pm_runtime_put for a single pm_runtime_get, throwing the reference counting off. Let's remove the pm_runtime_put call in the CRTC code in order to have the proper counting. Fixes: bca10db67bda ("drm/vc4: crtc: Make sure the HDMI controller is powered when disabling") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220203102003.1114673-1-maxime@cerno.tech
2022-02-17drm/vc4: hdmi: Unregister codec device on unbindMaxime Ripard
On bind we will register the HDMI codec device but we don't unregister it on unbind, leading to a device leakage. Unregister our device at unbind. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127111452.222002-1-maxime@cerno.tech
2022-02-17IB/qib: Fix duplicate sysfs directory nameMike Marciniszyn
The qib driver load has been failing with the following message: sysfs: cannot create duplicate filename '/devices/pci0000:80/0000:80:02.0/0000:81:00.0/infiniband/qib0/ports/1/linkcontrol' The patch below has two "linkcontrol" names causing the duplication. Fix by using the correct "diag_counters" name on the second instance. Fixes: 4a7aaf88c89f ("RDMA/qib: Use attributes for the port sysfs") Link: https://lore.kernel.org/r/1645106372-23004-1-git-send-email-mike.marciniszyn@cornelisnetworks.com Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-02-17spi: rockchip: terminate dma transmission when slave abortJon Lin
After slave abort, all DMA should be stopped, or it will affect the next transmission and maybe abort again. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20220216014028.8123-3-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-17spi: rockchip: Fix error in getting num-cs propertyJon Lin
Get num-cs u32 from dts of_node property rather than u16. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20220216014028.8123-2-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-17regmap-irq: Update interrupt clear register for proper resetPrasad Kumpatla
With the existing logic where clear_ack is true (HW doesn’t support auto clear for ICR), interrupt clear register reset is not handled properly. Due to this only the first interrupts get processed properly and further interrupts are blocked due to not resetting interrupt clear register. Example for issue case where Invert_ack is false and clear_ack is true: Say Default ISR=0x00 & ICR=0x00 and ISR is triggered with 2 interrupts making ISR = 0x11. Step 1: Say ISR is set 0x11 (store status_buff = ISR). ISR needs to be cleared with the help of ICR once the Interrupt is processed. Step 2: Write ICR = 0x11 (status_buff), this will clear the ISR to 0x00. Step 3: Issue - In the existing code, ICR is written with ICR = ~(status_buff) i.e ICR = 0xEE -> This will block all the interrupts from raising except for interrupts 0 and 4. So expectation here is to reset ICR, which will unblock all the interrupts. if (chip->clear_ack) { if (chip->ack_invert && !ret) ........ else if (!ret) ret = regmap_write(map, reg, ~data->status_buf[i]); So writing 0 and 0xff (when ack_invert is true) should have no effect, other than clearing the ACKs just set. Fixes: 3a6f0fb7b8eb ("regmap: irq: Add support to clear ack registers") Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20220217085007.30218-1-quic_pkumpatl@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-17usb: dwc2: drd: fix soft connect when gadget is unconfiguredFabrice Gasnier
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110 Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable <stable@vger.kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17usb: dwc3: pci: Fix Bay Trail phy GPIO mappingsHans de Goede
When the Bay Trail phy GPIO mappings where added cs and reset were swapped, this did not cause any issues sofar, because sofar they were always driven high/low at the same time. Note the new mapping has been verified both in /sys/kernel/debug/gpio output on Android factory images on multiple devices, as well as in the schematics for some devices. Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") Cc: stable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220213130524.18748-3-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17tps6598x: clear int mask on probe failureJens Axboe
The interrupt mask is enabled before any potential failure points in the driver, which can leave a failure path where we exit with interrupts enabled but the device not live. This causes an infinite stream of interrupts on an Apple M1 Pro laptop on USB-C. Add a failure label that's used post enabling interrupts, where we mask them again before returning an error. Suggested-by: Sven Peter <sven@svenpeter.dev> Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/e6b80669-20f3-06e7-9ed5-8951a9c6db6f@kernel.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17block: fix surprise removal for drivers calling blk_set_queue_dyingChristoph Hellwig
Various block drivers call blk_set_queue_dying to mark a disk as dead due to surprise removal events, but since commit 8e141f9eb803 that doesn't work given that the GD_DEAD flag needs to be set to stop I/O. Replace the driver calls to blk_set_queue_dying with a new (and properly documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the only remaining caller. Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk") Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-17net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990Daniele Palmas
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990 0x1071 composition in order to avoid bind error. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17Merge tag 'amd-drm-fixes-5.17-2022-02-16' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.17-2022-02-16: amdgpu: - Stable pstate clock fixes for Dimgrey Cavefish and Beige Goby - S0ix SDMA fix - Yellow Carp GPU reset fix radeon: - Backlight fix for iMac 12,1 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220217035242.8084-1-alexander.deucher@amd.com
2022-02-17drm/tegra: Fix cast to restricted __le32Jon Hunter
Sparse warns about the following cast in the function falcon_copy_firmware_image() ... drivers/gpu/drm/tegra/falcon.c:66:27: warning: cast to restricted __le32 Fix this by casting the firmware data array to __le32 instead of u32. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-02-17Merge tag 'mediatek-drm-fixes-5.17' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.17 1. Avoid EPROBE_DEFER loop with external bridge Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/1645027727-19554-1-git-send-email-chunkuang.hu@kernel.org
2022-02-16net: dsa: lantiq_gswip: fix use after free in gswip_remove()Alexey Khoroshilov
of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be done before mdiobus_free(priv->ds->slave_mii_bus). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 0d120dfb5d67 ("net: dsa: lantiq_gswip: don't use devres for mdiobus") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1644921768-26477-1-git-send-email-khoroshilov@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16Merge tag 'mmc-v5.17-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "Fix recovery logic for multi block I/O reads (MMC_READ_MULTIPLE_BLOCK)" * tag 'mmc-v5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: block: fix read single on recovery logic
2022-02-16tty: n_tty: do not look ahead for EOL character past the end of the bufferLinus Torvalds
Daniel Gibson reports that the n_tty code gets line termination wrong in very specific cases: "If you feed a line with exactly 64 chars + terminating newline, and directly afterwards (without reading) another line into a pseudo terminal, the the first read() on the other side will return the 64 char line *without* terminating newline, and the next read() will return the missing terminating newline AND the complete next line (if it fits in the buffer)" and bisected the behavior to commit 3b830a9c34d5 ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer"). Now, digging deeper, it turns out that the behavior isn't exactly new: what changed in commit 3b830a9c34d5 was that the tty line discipline .read() function is now passed an intermediate kernel buffer rather than the final user space buffer. And that intermediate kernel buffer is 64 bytes in size - thus that special case with exactly 64 bytes plus terminating newline. The same problem did exist before, but historically the boundary was not the 64-byte chunk, but the user-supplied buffer size, which is obviously generally bigger (and potentially bigger than N_TTY_BUF_SIZE, which would hide the issue entirely). The reason is that the n_tty canon_copy_from_read_buf() code would look ahead for the EOL character one byte further than it would actually copy. It would then decide that it had found the terminator, and unmark it as an EOL character - which in turn explains why the next read wouldn't then be terminated by it. Now, the reason it did all this in the first place is related to some historical and pretty obscure EOF behavior, see commit ac8f3bf8832a ("n_tty: Fix poll() after buffer-limited eof push read") and commit 40d5e0905a03 ("n_tty: Fix EOF push handling"). And the reason for the EOL confusion is that we treat EOF as a special EOL condition, with the EOL character being NUL (aka "__DISABLED_CHAR" in the kernel sources). So that EOF look-ahead also affects the normal EOL handling. This patch just removes the look-ahead that causes problems, because EOL is much more critical than the historical "EOF in the middle of a line that coincides with the end of the buffer" handling ever was. Now, it is possible that we should indeed re-introduce the "look at next character to see if it's a EOF" behavior, but if so, that should be done not at the kernel buffer chunk boundary in canon_copy_from_read_buf(), but at a higher level, when we run out of the user buffer. In particular, the place to do that would be at the top of 'n_tty_read()', where we check if it's a continuation of a previously started read, and there is no more buffer space left, we could decide to just eat the __DISABLED_CHAR at that point. But that would be a separate patch, because I suspect nobody actually cares, and I'd like to get a report about it before bothering. Fixes: 3b830a9c34d5 ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer") Fixes: ac8f3bf8832a ("n_tty: Fix poll() after buffer-limited eof push read") Fixes: 40d5e0905a03 ("n_tty: Fix EOF push handling") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215611 Reported-and-tested-by: Daniel Gibson <metalcaedes@gmail.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-02-16ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40Woody Suwalski
Add and ACPI idle power level limit for 32-bit ThinkPad T40. There is a regression on T40 introduced by commit d6b88ce2, starting with kernel 5.16: commit d6b88ce2eb9d2698eb24451eb92c0a1649b17bb1 Author: Richard Gong <richard.gong@amd.com> Date:   Wed Sep 22 08:31:16 2021 -0500 ACPI: processor idle: Allow playing dead in C3 state The above patch is trying to enter C3 state during init, what is causing a T40 system freeze. I have not found a similar issue on any other of my 32-bit machines. The fix is to add another exception to the processor_power_dmi_table[] list. As a result the dmesg shows as expected: [2.155398] ACPI: IBM ThinkPad T40 detected - limiting to C2 max_cstate. Override with "processor.max_cstate=9" [2.155404] ACPI: processor limited to max C-state 2 The fix is trivial and affects only vintage T40 systems. Fixes: d6b88ce2eb9d ("CPI: processor idle: Allow playing dead in C3 state") Signed-off-by: Woody Suwalski <wsuwalski@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: 5.16+ <stable@vger.kernel.org> # 5.16+ [ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-02-16gpu: host1x: Always return syncpoint value when waitingMikko Perttunen
The new TegraDRM UAPI uses syncpoint waiting with timeout set to zero to indicate reading the syncpoint value. To support that we need to return the syncpoint value always when waiting. Fixes: 44e961381354 ("drm/tegra: Implement syncpoint wait UAPI") Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-02-16gpio: rockchip: Reset int_bothedge when changing triggerSamuel Holland
With v2 hardware, an IRQ can be configured to trigger on both edges via a bit in the int_bothedge register. Currently, the driver sets this bit when changing the trigger type to IRQ_TYPE_EDGE_BOTH, but fails to reset this bit if the trigger type is later changed to something else. This causes spurious IRQs, and when using gpio-keys with wakeup-event-action set to EV_ACT_(DE)ASSERTED, those IRQs translate into spurious wakeups. Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller") Reported-by: Guillaume Savaton <guillaume@baierouge.fr> Tested-by: Guillaume Savaton <guillaume@baierouge.fr> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
generated by cgit (git 2.34.1) at 2025-10-03 00:35:58 +0000