summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-09-28Merge tag 'mmc-v5.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - renesas_sdhi: Fix regression with hard reset on old SDHIs - dw_mmc: Only inject fault before done/error * tag 'mmc-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: fix regression with hard reset on old SDHIs mmc: dw_mmc: Only inject fault before done/error
2021-09-28net: hns3: fix hclge_dbg_dump_tm_pg() stack usageArnd Bergmann
This function copies strings around between multiple buffers including a large on-stack array that causes a build warning on 32-bit systems: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=] The function can probably be cleaned up a lot, to go back to printing directly into the output buffer, but dynamically allocating the structure is a simpler workaround for now. Fixes: 04d96139ddb3 ("net: hns3: refine function hclge_dbg_dump_tm_pri()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28net: mdio: mscc-miim: Fix the mdio controllerHoratiu Vultur
According to the documentation the second resource is optional. But the blamed commit ignores that and if the resource is not there it just fails. This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: 672a1c394950 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28net: sun: SUNVNET_COMMON should depend on INETRandy Dunlap
When CONFIG_INET is not set, there are failing references to IPv4 functions, so make this driver depend on INET. Fixes these build errors: sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common': sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send' sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common': sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Aaron Young <aaron.young@oracle.com> Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28ionic: fix gathering of debug statsShannon Nelson
Don't print stats for which we haven't reserved space as it can cause nasty memory bashing and related bad behaviors. Fixes: aa620993b1e5 ("ionic: pull per-q stats work out of queue loops") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tDavid S. Miller
nguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-09-27 This series contains updates to e100 driver only. Jake corrects under allocation of register buffer due to incorrect calculations and fixes buffer overrun of register dump. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28dmascc: add CONFIG_VIRT_TO_BUS dependencyArnd Bergmann
Many architectures don't define virt_to_bus() any more, as drivers should be using the dma-mapping interfaces where possible: In file included from drivers/net/hamradio/dmascc.c:27: drivers/net/hamradio/dmascc.c: In function 'tx_on': drivers/net/hamradio/dmascc.c:976:30: error: implicit declaration of function 'virt_to_bus'; did you mean 'virt_to_fix'? [-Werror=implicit-function-declaration] 976 | virt_to_bus(priv->tx_buf[priv->tx_tail]) + n); | ^~~~~~~~~~~ arch/arm/include/asm/dma.h:109:52: note: in definition of macro 'set_dma_addr' 109 | __set_dma_addr(chan, (void *)__bus_to_virt(addr)) | ^~~~ Add the Kconfig dependency to prevent this from being built on architectures without virt_to_bus(). Fixes: bc1abb9e55ce ("dmascc: use proper 'virt_to_bus()' rather than casting to 'int'") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28net: ks8851: fix link errorArnd Bergmann
An object file cannot be built for both loadable module and built-in use at the same time: arm-linux-gnueabi-ld: drivers/net/ethernet/micrel/ks8851_common.o: in function `ks8851_probe_common': ks8851_common.c:(.text+0xf80): undefined reference to `__this_module' Change the ks8851_common code to be a standalone module instead, and use Makefile logic to ensure this is built-in if at least one of its two users is. Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations") Link: https://lore.kernel.org/netdev/20210125121937.3900988-1-arnd@kernel.org/ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28iommu/dart: Clear sid2group entry when a group is freedSven Peter
sid2groups keeps track of which stream id combinations belong to a iommu_group to assign those correctly to devices. When a iommu_group is freed a stale pointer will however remain in sid2groups. This prevents devices with the same stream id combination to ever be attached again (see below). Fix that by creating a shadow copy of the stream id configuration when a group is allocated for the first time and clear the sid2group entry when that group is freed. # echo 1 >/sys/bus/pci/devices/0000\:03\:00.0/remove pci 0000:03:00.0: Removing from iommu group 1 # echo 1 >/sys/bus/pci/rescan [...] pci 0000:03:00.0: BAR 0: assigned [mem 0x6a0000000-0x6a000ffff 64bit pref] pci 0000:03:00.0: BAR 2: assigned [mem 0x6a0010000-0x6a001ffff 64bit pref] pci 0000:03:00.0: BAR 6: assigned [mem 0x6c0100000-0x6c01007ff pref] tg3 0000:03:00.0: Failed to add to iommu group 1: -2 [...] Fixes: 46d1fb072e76b161 ("iommu/dart: Add DART iommu driver") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sven Peter <sven@svenpeter.dev> Tested-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210924134502.15589-1-sven@svenpeter.dev Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-28iommu/vt-d: Drop "0x" prefix from PCI bus & device addressesBjorn Helgaas
719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") changed the DMA fault reason from hex to decimal. It also added "0x" prefixes to the PCI bus/device, e.g., - DMAR: [INTR-REMAP] Request device [00:00.5] + DMAR: [INTR-REMAP] Request device [0x00:0x00.5] These no longer match dev_printk() and other similar messages in dmar_match_pci_path() and dmar_acpi_insert_dev_scope(). Drop the "0x" prefixes from the bus and device addresses. Fixes: 719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20210903193711.483999-1-helgaas@kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210922054726.499110-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-28iommu/dart: Remove iommu_flush_opsSven Peter
apple_dart_tlb_flush_{all,walk} expect to get a struct apple_dart_domain but instead get a struct iommu_domain right now. This breaks those two functions and can lead to kernel panics like the one below. DART can only invalidate the entire TLB and apple_dart_iotlb_sync will already flush everything. There's no need to do that again inside those two functions. Let's just drop them. pci 0000:03:00.0: Removing from iommu group 1 Unable to handle kernel paging request at virtual address 0000000100000023 [...] Call trace: _raw_spin_lock_irqsave+0x54/0xbc apple_dart_hw_stream_command.constprop.0+0x2c/0x130 apple_dart_tlb_flush_all+0x48/0x90 free_io_pgtable_ops+0x40/0x70 apple_dart_domain_free+0x2c/0x44 iommu_group_release+0x68/0xac kobject_cleanup+0x4c/0x1fc kobject_cleanup+0x14c/0x1fc kobject_put+0x64/0x84 iommu_group_remove_device+0x110/0x180 iommu_release_device+0x50/0xa0 [...] Fixes: 46d1fb072e76b161 ("iommu/dart: Add DART iommu driver") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sven Peter <sven@svenpeter.dev> Acked-by: Marc Zyngier <maz@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210921153934.35647-1-sven@svenpeter.dev Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-09-28driver core: Add debug logs when fwnode links are added/deletedSaravana Kannan
This will help with debugging fw_devlink issues. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210915172808.620546-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-28driver core: Create __fwnode_link_del() helper functionSaravana Kannan
The same code is repeated in multiple locations. Create a helper function for it. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210915172808.620546-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-28driver core: Set deferred probe reason when deferred by driver coreSaravana Kannan
When the driver core defers the probe of a device, set the deferred probe reason so that it's easier to debug. The deferred probe reason is available in debugfs under devices_deferred. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210915172808.620546-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-28Merge tag 'drm/tegra/for-5.15-rc3' of ↵Dave Airlie
ssh://git.freedesktop.org/git/tegra/linux into drm-fixes drm/tegra: Fixes for v5.15-rc3 This contains a fix for an UAPI error that happens when no IOMMU is enabled, as well as a few build warning fixes and plugs a potential memory leak. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210924143537.1341882-1-thierry.reding@gmail.com
2021-09-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "A bit late... I got sidetracked by back-from-vacation routines and conferences. But most of these patches are already a few weeks old and things look more calm on the mailing list than what this pull request would suggest. x86: - missing TLB flush - nested virtualization fixes for SMM (secure boot on nested hypervisor) and other nested SVM fixes - syscall fuzzing fixes - live migration fix for AMD SEV - mirror VMs now work for SEV-ES too - fixes for reset - possible out-of-bounds access in IOAPIC emulation - fix enlightened VMCS on Windows 2022 ARM: - Add missing FORCE target when building the EL2 object - Fix a PMU probe regression on some platforms Generic: - KCSAN fixes selftests: - random fixes, mostly for clang compilation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits) selftests: KVM: Explicitly use movq to read xmm registers selftests: KVM: Call ucall_init when setting up in rseq_test KVM: Remove tlbs_dirty KVM: X86: Synchronize the shadow pagetable before link it KVM: X86: Fix missed remote tlb flush in rmap_write_protect() KVM: x86: nSVM: don't copy virt_ext from vmcb12 KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0 KVM: x86: nSVM: restore int_vector in svm_clear_vintr kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[] KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode KVM: x86: reset pdptrs_from_userspace when exiting smm KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit KVM: nVMX: Filter out all unsupported controls when eVMCS was activated KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs KVM: Clean up benign vcpu->cpu data races when kicking vCPUs ...
2021-09-27Merge tag 'media/v5.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A couple of driver fixes: - hantro: Fix check for single irq - cedrus: Fix SUNXI tile size calculation - s5p-jpeg: rename JPEG marker constants to prevent build warnings - ir_toy: prevent device from hanging during transmit" * tag 'media/v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: ir_toy: prevent device from hanging during transmit media: s5p-jpeg: rename JPEG marker constants to prevent build warnings media: cedrus: Fix SUNXI tile size calculation media: hantro: Fix check for single irq
2021-09-27watchdog/sb_watchdog: fix compilation problem due to COMPILE_TESTJackie Liu
Compiling sb_watchdog needs to clearly define SIBYTE_HDR_FEATURES. In arch/mips/sibyte/Platform like: cflags-$(CONFIG_SIBYTE_BCM112X) += \ -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL Otherwise, SIBYTE_HDR_FEATURES is SIBYTE_HDR_FMASK_ALL. SIBYTE_HDR_FMASK_ALL is mean: #define SIBYTE_HDR_FMASK_ALL SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \ | SIBYTE_HDR_FMASK_1480_ALL) So, If not limited to CPU_SB1, we will get such an error: arch/mips/include/asm/sibyte/bcm1480_scd.h:261: error: "M_SPC_CFG_CLEAR" redefined [-Werror] arch/mips/include/asm/sibyte/bcm1480_scd.h:262: error: "M_SPC_CFG_ENABLE" redefined [-Werror] Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-27nvdimm/pmem: fix creating the dax groupChristoph Hellwig
The recent block layer refactoring broke the way how the pmem driver abused device_add_disk. Fix this by properly passing the attribute groups to device_add_disk. Fixes: 52b85909f85d ("block: fold register_disk into device_add_disk") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210922173431.2454024-2-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-27ACPI: NFIT: Use fallback node id when numa info in NFIT table is incorrectJia He
When ACPI NFIT table is failing to populate correct numa information on arm64, dax_kmem will get NUMA_NO_NODE from the NFIT driver. Without this patch, pmem can't be probed as RAM devices on arm64 guest: $ndctl create-namespace -fe namespace0.0 --mode=devdax --map=dev -s 1g -a 128M kmem dax0.0: rejecting DAX region [mem 0x240400000-0x2bfffffff] with invalid node: -1 kmem: probe of dax0.0 failed with error -22 Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jia He <justin.he@arm.com> Cc: <stable@vger.kernel.org> Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM") Link: https://lore.kernel.org/r/20210922152919.6940-1-justin.he@arm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-27RDMA/hns: Add the check of the CQE size of the user spaceWenpeng Liang
If the CQE size of the user space is not the size supported by the hardware, the creation of CQ should be stopped. Fixes: 09a5f210f67e ("RDMA/hns: Add support for CQE in size of 64 Bytes") Link: https://lore.kernel.org/r/20210927125557.15031-3-liangwenpeng@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-27RDMA/hns: Fix the size setting error when copying CQE in clean_cq()Wenpeng Liang
The size of CQE is different for different versions of hardware, so the driver needs to specify the size of CQE explicitly. Fixes: 09a5f210f67e ("RDMA/hns: Add support for CQE in size of 64 Bytes") Link: https://lore.kernel.org/r/20210927125557.15031-2-liangwenpeng@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-27RDMA/hfi1: Fix kernel pointer leakGuo Zhi
Pointers should be printed with %p or %px rather than cast to 'unsigned long long' and printed with %llx. Change %llx to %p to print the secured pointer. Fixes: 042a00f93aad ("IB/{ipoib,hfi1}: Add a timeout handler for rdma_netdev") Link: https://lore.kernel.org/r/20210922134857.619602-1-qtxuning1999@sjtu.edu.cn Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn> Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - NULL pointer dereference fixes in amd_sfh driver (Basavaraj Natikar, Evgeny Novikov) - data processing fix for hid-u2fzero (Andrej Shadura) - fix for out-of-bounds write in hid-betop (F.A.Sulaiman) - new device IDs / device-specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: amd_sfh: Fix potential NULL pointer dereference HID: u2fzero: ignore incomplete packets without data HID: amd_sfh: Fix potential NULL pointer dereference HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDs HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS HID: betop: fix slab-out-of-bounds Write in betop_probe
2021-09-27nvme: add command id quirk for apple controllersKeith Busch
Some apple controllers use the command id as an index to implementation specific data structures and will fail if the value is out of bounds. The nvme driver's recently introduced command sequence number breaks this controller. Provide a quirk so these spec incompliant controllers can function as before. The driver will not have the ability to detect bad completions when this quirk is used, but we weren't previously checking this anyway. The quirk bit was selected so that it can readily apply to stable. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214509 Cc: Sven Peter <sven@svenpeter.dev> Reported-by: Orlando Chamberlain <redecorating@protonmail.com> Reported-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20210927154306.387437-1-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-27e100: fix buffer overrun in e100_get_regsJacob Keller
The e100_get_regs function is used to implement a simple register dump for the e100 device. The data is broken into a couple of MAC control registers, and then a series of PHY registers, followed by a memory dump buffer. The total length of the register dump is defined as (1 + E100_PHY_REGS) * sizeof(u32) + sizeof(nic->mem->dump_buf). The logic for filling in the PHY registers uses a convoluted inverted count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This is actually one more than the supposed number of PHY registers. The memory dump buffer is then filled into the space at [2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past the total size. The end result is that we overrun the total buffer size allocated by the kernel, which could lead to a panic or other issues due to memory corruption. It is difficult to determine the actual total number of registers here. The only 8255x datasheet I could find indicates there are 28 total MDI registers. However, we're reading 29 here, and reading them in reverse! In addition, the ethtool e100 register dump interface appears to read the first PHY register to determine if the device is in MDI or MDIx mode. This doesn't appear to be documented anywhere within the 8255x datasheet. I can only assume it must be in register 28 (the extra register we're reading here). Lets not change any of the intended meaning of what we copy here. Just extend the space by 4 bytes to account for the extra register and continue copying the data out in the same order. Change the E100_PHY_REGS value to be the correct total (29) so that the total register dump size is calculated properly. Fix the offset for where we copy the dump buffer so that it doesn't overrun the total size. Re-write the for loop to use counting up instead of the convoluted down-counting. Correct the mdio_read offset to use the 0-based register offsets, but maintain the bizarre reverse ordering so that we have the ABI expected by applications like ethtool. This requires and additional subtraction of 1. It seems a bit odd but it makes the flow of assignment into the register buffer easier to follow. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-27e100: fix length calculation in e100_get_regs_lenJacob Keller
commit abf9b902059f ("e100: cleanup unneeded math") tried to simplify e100_get_regs_len and remove a double 'divide and then multiply' calculation that the e100_reg_regs_len function did. This change broke the size calculation entirely as it failed to account for the fact that the numbered registers are actually 4 bytes wide and not 1 byte. This resulted in a significant under allocation of the register buffer used by e100_get_regs. Fix this by properly multiplying the register count by u32 first before adding the size of the dump buffer. Fixes: abf9b902059f ("e100: cleanup unneeded math") Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-27ipack: ipoctal: fix module reference leakJohan Hovold
A reference to the carrier module was taken on every open but was only released once when the final reference to the tty struct was dropped. Fix this by taking the module reference and initialising the tty driver data when installing the tty. Fixes: 82a82340bab6 ("ipoctal: get carrier driver to avoid rmmod") Cc: stable@vger.kernel.org # 3.18 Cc: Federico Vaga <federico.vaga@cern.ch> Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210917114622.5412-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27ipack: ipoctal: fix missing allocation-failure checkJohan Hovold
Add the missing error handling when allocating the transmit buffer to avoid dereferencing a NULL pointer in write() should the allocation ever fail. Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board") Cc: stable@vger.kernel.org # 3.5 Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210917114622.5412-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27ipack: ipoctal: fix tty-registration error handlingJohan Hovold
Registration of the ipoctal tty devices is unlikely to fail, but if it ever does, make sure not to deregister a never registered tty device (and dereference a NULL pointer) when the driver is later unbound. Fixes: 2afb41d9d30d ("Staging: ipack/devices/ipoctal: Check tty_register_device return value.") Cc: stable@vger.kernel.org # 3.7 Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210917114622.5412-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27ipack: ipoctal: fix tty registration raceJohan Hovold
Make sure to set the tty class-device driver data before registering the tty to avoid having a racing open() dereference a NULL pointer. Fixes: 9c1d784afc6f ("Staging: ipack/devices/ipoctal: Get rid of ipoctal_list.") Cc: stable@vger.kernel.org # 3.7 Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210917114622.5412-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27ipack: ipoctal: fix stack information leakJohan Hovold
The tty driver name is used also after registering the driver and must specifically not be allocated on the stack to avoid leaking information to user space (or triggering an oops). Drivers should not try to encode topology information in the tty device name but this one snuck in through staging without anyone noticing and another driver has since copied this malpractice. Fixing the ABI is a separate issue, but this at least plugs the security hole. Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board") Cc: stable@vger.kernel.org # 3.5 Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210917114622.5412-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27Merge tag 'icc-5.15-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Georgi writes: interconnect fixes for v5.15 This contains a few fixes for the sdm660 driver: - sdm660: Fix id of slv_cnoc_mnoc_cfg - sdm660: Correct NOC_QOS_PRIORITY shift and mask - sdm660: Add missing a2noc qos clocks Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: sdm660: Add missing a2noc qos clocks dt-bindings: interconnect: sdm660: Add missing a2noc qos clocks interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and mask interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfg
2021-09-27net: phy: enhance GPY115 loopback disable functionXu Liang
GPY115 need reset PHY when it comes out from loopback mode if the firmware version number (lower 8 bits) is equal to or below 0x76. Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Xu Liang <lxu@maxlinear.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27Merge tag 'mac80211-for-net-2021-09-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes berg says: ==================== Some fixes: * potential use-after-free in CCMP/GCMP RX processing * potential use-after-free in TX A-MSDU processing * revert to low data rates for no-ack as the commit broke other things * limit VHT MCS/NSS in radiotap injection * drop frames with invalid addresses in IBSS mode * check rhashtable_init() return value in mesh * fix potentially unaligned access in mesh * fix late beacon hrtimer handling in hwsim (syzbot) * fix documentation for PTK0 rekeying ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU portsAndrew Lunn
Same members of the Marvell Ethernet switches impose MTU restrictions on ports used for connecting to the CPU or another switch for DSA. If the MTU is set too low, tagged frames will be discarded. Ensure the worst case tagger overhead is included in setting the MTU for DSA and CPU ports. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 <cao88yu@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27dsa: mv88e6xxx: Fix MTU definitionAndrew Lunn
The MTU passed to the DSA driver is the payload size, typically 1500. However, the switch uses the frame size when applying restrictions. Adjust the MTU with the size of the Ethernet header and the frame checksum. The VLAN header also needs to be included when the frame size it per port, but not when it is global. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 <cao88yu@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27dsa: mv88e6xxx: 6161: Use chip wide MAX MTUAndrew Lunn
The datasheets suggests the 6161 uses a per port setting for jumbo frames. Testing has however shown this is not correct, it uses the old style chip wide MTU control. Change the ops in the 6161 structure to reflect this. Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU") Reported by: 曹煜 <cao88yu@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: mdiobus: Fix memory leak in __mdiobus_registerYanfei Xu
Once device_register() failed, we should call put_device() to decrement reference count for cleanup. Or it will cause memory leak. BUG: memory leak unreferenced object 0xffff888114032e00 (size 256): comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff ................ 08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff .........ve..... backtrace: [<ffffffff8265cfab>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff8265cfab>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff8265cfab>] device_private_init drivers/base/core.c:3203 [inline] [<ffffffff8265cfab>] device_add+0x89b/0xdf0 drivers/base/core.c:3253 [<ffffffff828dd643>] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969 [<ffffffff82660916>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [<ffffffff8265cd0b>] device_add+0x5fb/0xdf0 drivers/base/core.c:3359 [<ffffffff82c343b9>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170 [<ffffffff82c4473c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 BUG: memory leak unreferenced object 0xffff888116f06900 (size 32): comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s) hex dump (first 32 bytes): 75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00 usb-001:003..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81484516>] kstrdup+0x36/0x70 mm/util.c:60 [<ffffffff814845a3>] kstrdup_const+0x53/0x80 mm/util.c:83 [<ffffffff82296ba2>] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48 [<ffffffff82358d4b>] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289 [<ffffffff826575f3>] dev_set_name+0x63/0x90 drivers/base/core.c:3147 [<ffffffff828dd63b>] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969 Reported-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27Revert "ibmvnic: check failover_pending in login response"Desnes A. Nunes do Rosario
This reverts commit d437f5aa23aa2b7bd07cd44b839d7546cc17166f. Code has been duplicated through commit <273c29e944bd> "ibmvnic: check failover_pending in login response" Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27s390/cio: avoid excessive path-verification requestsVineeth Vijayan
Currently when removing a device from cio_ignore list, we trigger a path-verification for all the subchannels available in the system. This could lead to path-verification requests on subchannels with an online device, which could cause unwanted delay. Instead of all the subchannels, trigger the path-verifications to those without an online device. Reported-by: Julian Wiedmann <jwi@linux.ibm.com> Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-09-27net: bgmac-platform: handle mac-address deferralMatthew Hagan
This patch is a replication of Christian Lamparter's "net: bgmac-bcma: handle deferred probe error due to mac-address" patch for the bgmac-platform driver [1]. As is the case with the bgmac-bcma driver, this change is to cover the scenario where the MAC address cannot yet be discovered due to reliance on an nvmem provider which is yet to be instantiated, resulting in a random address being assigned that has to be manually overridden. [1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.com Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: hns: Fix spelling mistake "maped" -> "mapped"Colin Ian King
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27drm/i915: Remove warning from the rps workerTejas Upadhyay
In commit 4e5c8a99e1cb ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()"), we decoupled the rps worker from the pm so that we could avoid the synchronization penalty which makes the assertion liable to run too early. Which makes warning invalid hence removed. Fixes: 4e5c8a99e1cb ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210914090412.1393498-1-tejaskumarx.surendrakumar.upadhyay@intel.com (cherry picked from commit a837a0686308d95ad9c48d32b4dfe86a17dc98c2) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-27drm/i915/request: fix early tracepointsMatthew Auld
Currently we blow up in trace_dma_fence_init, when calling into get_driver_name or get_timeline_name, since both the engine and context might be NULL(or contain some garbage address) in the case of newly allocated slab objects via the request ctor. Note that we also use SLAB_TYPESAFE_BY_RCU here, which allows requests to be immediately freed, but delay freeing the underlying page by an RCU grace period. With this scheme requests can be re-allocated, at the same time as they are also being read by some lockless RCU lookup mechanism. In the ctor case, which is only called for new slab objects(i.e allocate new page and call the ctor for each object) it's safe to reset the context/engine prior to calling into dma_fence_init, since we can be certain that no one is doing an RCU lookup which might depend on peeking at the engine/context, like in active_engine(), since the object can't yet be externally visible. In the recycled case(which might also be externally visible) the request refcount always transitions from 0->1 after we set the context/engine etc, which should ensure it's valid to dereference the engine for example, when doing an RCU list-walk, so long as we can also increment the refcount first. If the refcount is already zero, then the request is considered complete/released. If it's non-zero, then the request might be in the process of being re-allocated, or potentially still in flight, however after successfully incrementing the refcount, it's possible to carefully inspect the request state, to determine if the request is still what we were looking for. Note that all externally visible requests returned to the cache must have zero refcount. One possible fix then is to move dma_fence_init out from the request ctor. Originally this was how it was done, but it was moved in: commit 855e39e65cfc33a73724f1cc644ffc5754864a20 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Feb 3 09:41:48 2020 +0000 drm/i915: Initialise basic fence before acquiring seqno where it looks like intel_timeline_get_seqno() relied on some of the rq->fence state, but that is no longer the case since: commit 12ca695d2c1ed26b2dcbb528b42813bd0f216cfc Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Tue Mar 23 16:49:50 2021 +0100 drm/i915: Do not share hwsp across contexts any more, v8. intel_timeline_get_seqno() could also be cleaned up slightly by dropping the request argument. Moving dma_fence_init back out of the ctor, should ensure we have enough of the request initialised in case of trace_dma_fence_init. Functionally this should be the same, and is effectively what we were already open coding before, except now we also assign the fence->lock and fence->ops, but since these are invariant for recycled requests(which might be externally visible), and will therefore already hold the same value, it shouldn't matter. An alternative fix, since we don't yet have a fully initialised request when in the ctor, is just setting the context/engine as NULL, but this does require adding some extra handling in get_driver_name etc. v2(Daniel): - Try to make the commit message less confusing Fixes: 855e39e65cfc ("drm/i915: Initialise basic fence before acquiring seqno") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Michael Mason <michael.w.mason@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210921134202.3803151-1-matthew.auld@intel.com (cherry picked from commit be988eaee1cb208c4445db46bc3ceaf75f586f0b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-27drm/i915/guc, docs: Fix pdfdocs build error by removing nested gridAkira Yokosawa
Nested grids in grid-table cells are not specified as proper ReST constructs. Commit 572f2a5cd974 ("drm/i915/guc: Update firmware to v62.0.0") added a couple of kerneldoc tables of the form: +---+-------+------------------------------------------------------+ | 1 | 31:0 | +------------------------------------------------+ | +---+-------+ | | | |...| | | Embedded `HXG Message`_ | | +---+-------+ | | | | n | 31:0 | +------------------------------------------------+ | +---+-------+------------------------------------------------------+ For "make htmldocs", they happen to work as one might expect, but they are incompatible with "make latexdocs" and "make pdfdocs", and cause the generated gpu.tex file to become incomplete and unbuildable by xelatex. Restore the compatibility by removing those nested grids in the tables. Size comparison of generated gpu.tex: Sphinx 2.4.4 Sphinx 4.2.0 v5.14: 3238686 3841631 v5.15-rc1: 376270 432729 with this fix: 3377846 3998095 Fixes: 572f2a5cd974 ("drm/i915/guc: Update firmware to v62.0.0") Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4a227569-074f-c501-58bb-d0d8f60a8ae9@gmail.com (cherry picked from commit 017792a041183c4f5ec595f386e76a40ed728cfc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-27Merge tag 'gvt-fixes-2021-09-18' of https://github.com/intel/gvt-linux into ↵Jani Nikula
drm-intel-fixes gvt-fixes-2021-09-18 - ww locking fix from Zhi Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210918071105.GY14689@zhen-hp.sh.intel.com
2021-09-27HID: amd_sfh: Fix potential NULL pointer dereferenceBasavaraj Natikar
The cl_data field of a privdata must be allocated and updated before using in amd_sfh_hid_client_init() function. Hence handling NULL pointer cl_data accordingly. Fixes: d46ef750ed58 ("HID: amd_sfh: Fix potential NULL pointer dereference") Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-09-26Merge tag 'edac_urgent_for_v5.15_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: "Fix two EDAC drivers using the wrong value type for the DIMM mode" * tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/dmc520: Assign the proper type to dimm->edac_mode EDAC/synopsys: Fix wrong value type assignment for edac_mode
2021-09-26Merge tag 'thermal-v5.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fixes from Daniel Lezcano: - Fix thermal shutdown after a suspend/resume due to a wrong TCC value restored on Intel platform (Antoine Tenart) - Fix potential buffer overflow when building the list of policies. The buffer size is not updated after writing to it (Dan Carpenter) - Fix wrong check against IS_ERR instead of NULL (Ansuel Smith) * tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/tsens: Fix wrong check for tzd in irq handlers thermal/core: Potential buffer overflow in thermal_build_list_of_policies() thermal/drivers/int340x: Do not set a wrong tcc offset on resume
generated by cgit (git 2.34.1) at 2025-09-11 02:00:43 +0000