summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-08-20net: phy: Uniform PHY driver accessGerhard Engleder
struct phy_device contains a pointer to the PHY driver and nearly everywhere this pointer is used to access the PHY driver. Only mdio_bus_phy_may_suspend() is still using to_phy_driver() instead of the PHY driver pointer. Uniform PHY driver access by eliminating to_phy_driver() use in mdio_bus_phy_may_suspend(). Only phy_bus_match() and phy_probe() are still using to_phy_driver(), because PHY driver pointer is not available there. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20net: phy: Support set_loopback overrideGerhard Engleder
phy_read_status and various other PHY functions support PHY specific overriding of driver functions by using a PHY specific pointer to the PHY driver. Add support of PHY specific override to phy_loopback too. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20net: sparx5: switchdev: adding frame DMA functionalitySteen Hegelund
This add frame DMA functionality to the Sparx5 platform. Ethernet frames can be extracted or injected autonomously to or from the device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list data structures in memory are used for injecting or extracting Ethernet frames. The FDMA generates interrupts when frame extraction or injection is done and when the linked lists need updating. The FDMA implements two extraction channels, one per switch core port towards the VCore CPU system and a total of six injection channels. Extraction channels are mapped one-to-one to the CPU ports, while injection channels can be individually assigned to any CPU port. - FDMA channel 0 through 5 corresponds to CPU port 0 injection direction FDMA_CH_CFG[channel].CH_INJ_PORT is set to 0. - FDMA channel 0 through 5 corresponds to CPU port 1 injection direction when FDMA_CH_CFG[channel].CH_INJ_PORT is set to 1. - FDMA channel 6 corresponds to CPU port 0 extraction direction. - FDMA channel 7 corresponds to CPU port 1 extraction direction. The FDMA implements a strict priority scheme among channels. Extraction channels are prioritized over injection channels and secondarily channels with higher channel number are prioritized over channels with lower number. On the other hand, ports are being served on an equal-bandwidth principle both on injection and extraction directions. The equal-bandwidth principle will not force an equal bandwidth. Instead, it ensures that the ports perform at their best considering the operating conditions. When more than one injection channel is enabled for injection on the same CPU port, priority determines which channel can inject data. Ownership is re-arbitrated on frame boundaries. The FDMA processes linked lists of DMA Control Block Structures (DCBs). The DCBs have the same basic structure for both injection and extraction. A DCB must be placed on a 64-bit word-aligned address in memory. Each DCB has a per-channel configurable amount of associated data blocks in memory, where the frame data is stored. The data blocks that are used by extraction channels must be placed on 64-bit word aligned addresses in memory, and their length must be a multiple of 128 bytes. A DCB carries the pointer to the next DCB of the linked list, the INFO word which holds information for the DCB, and a pair of status word and memory pointer for every data block that it is associated with. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20HID: sony: Fix more ShanWan clone gamepads to not rumble when plugged in.Ulrich Spörlein
The device string on these can differ, apparently, including typos. I've bought 2 of these in 2012 and googling shows many folks out there with that broken spelling in their dmesg. Signed-off-by: Ulrich Spörlein <uqs@FreeBSD.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: sony: support for the ghlive ps4 donglesDaniel Nguyen
This commit adds support for the Guitar Hero Live PS4 dongles. These dongles require a "magic" USB control message to be sent every 8 seconds otherwise the dongle will not report events where the strumbar is hit while a fret is being held. Note that the GHL_GUITAR_POKE_INTERVAL is reduced to 8 seconds in order to support PS3, Wii U, and PS4 GHL dongles. Also note that the constant for vendor id 0x1430 has been renamed from Activision to RedOctane as self-declared by the device. Co-developed-by: Pascal Giard <pascal.giard@etsmtl.ca> Signed-off-by: Pascal Giard <pascal.giard@etsmtl.ca> Signed-off-by: Daniel Nguyen <daniel.nguyen.1@ens.etsmtl.ca> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: thrustmaster: clean up Makefile and adapt quirksLukas Bulwahn
Commit c49c33637802 ("HID: support for initialization of some Thrustmaster wheels") messed up the Makefile and quirks during the refactoring of this commit. Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs: HID_TMINIT Referencing files: drivers/hid/Makefile, drivers/hid/hid-quirks.c Following the discussion (see Link), CONFIG_HID_THRUSTMASTER is the intended config for CONFIG_HID_TMINIT and the file hid-tminit.c was actually added as hid-thrustmaster.c. So, clean up Makefile and adapt quirks to that refactoring. Fixes: c49c33637802 ("HID: support for initialization of some Thrustmaster wheels") Link: https://lore.kernel.org/linux-input/CAKXUXMx6dByO03f3dX0X5zjvQp0j2AhJBg0vQFDmhZUhtKxRxw@mail.gmail.com/ Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: i2c-hid: Fix Elan touchpad regressionJim Broadus
A quirk was recently added for Elan devices that has same device match as an entry earlier in the list. The i2c_hid_lookup_quirk function will always return the last match in the list, so the new entry shadows the old entry. The quirk in the previous entry, I2C_HID_QUIRK_BOGUS_IRQ, silenced a flood of messages which have reappeared in the 5.13 kernel. This change moves the two quirk flags into the same entry. Fixes: ca66a6770bd9 (HID: i2c-hid: Skip ELAN power-on command after reset) Signed-off-by: Jim Broadus <jbroadus@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: asus: Prevent Claymore sending suspend eventLuke D. Jones
Prevent the ASUS Claymore keyboard from sending a suspend event when the device sleeps itself. The suspend event causes a system suspend if uncaught. Signed off by: Luke D Jones <luke@ljones.dev> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: amd_sfh: Add dyndbg prints for debuggingBasavaraj Natikar
Add dynamic debug for debugging sensors states during initialization, stop, suspend and resume. Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: amd_sfh: Add support for PM suspend and resumeBasavaraj Natikar
Add support for power management routines. Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: amd_sfh: Move hid probe after sensor is enabledBasavaraj Natikar
Earlier platforms don’t have sensor status checking mechanism. Sensors are always enabled without checking sensor status. Hence invoke hid probe only after the sensor is enabled by checking sensor status. Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: amd_sfh: Add command response to check command statusBasavaraj Natikar
Sometimes sensor enable/disable may take time, without checking the actual status bits from MP2 FW can lead the amd-sfh to misbehave. Hence add a status check of enable/disable command by waiting on the command response before sending the next command to FW. Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: amd_sfh: Fix period data field to enable sensorBasavaraj Natikar
Existing amd-sfh driver is programming the MP2 firmware period field in units of jiffies, but the MP2 firmware expects in milliseconds unit. Changing it to milliseconds. Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)") Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20PCI: keembay: Add support for Intel Keem BaySrikanth Thokala
Add driver for Intel Keem Bay SoC PCIe controller. This controller is based on DesignWare PCIe core. In Root Complex mode, only internal reference clock is possible for Keem Bay A0. For Keem Bay B0, external reference clock can be used and will be the default configuration. Currently, keembay_pcie_of_data structure has one member. It will be expanded later to handle this difference. Endpoint mode link initialization is handled by the boot firmware. Link: https://lore.kernel.org/r/20210805211010.29484-3-srikanth.thokala@intel.com Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by: Srikanth Thokala <srikanth.thokala@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-08-20PCI: aardvark: Configure PCIe resources from 'ranges' DT propertyPali Rohár
In commit 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window configuration") was removed aardvark PCIe outbound window configuration and commit description said that was recommended solution by HW designers. But that commit completely removed support for configuring PCIe IO resources without removing PCIe IO 'ranges' from DTS files. After that commit PCIe IO space started to be treated as PCIe MEM space and accessing it just caused kernel crash. Moreover implementation of PCIe outbound windows prior that commit was incorrect. It completely ignored offset between CPU address and PCIe bus address and expected that in DTS is CPU address always same as PCIe bus address without doing any checks. Also it completely ignored size of every PCIe resource specified in 'ranges' DTS property and expected that every PCIe resource has size 128 MB (also for PCIe IO range). Again without any check. Apparently none of PCIe resource has in DTS specified size of 128 MB. So it was completely broken and thanks to how aardvark mask works, configuration was completely ignored. This patch reverts back support for PCIe outbound window configuration but implementation is a new without issues mentioned above. PCIe outbound window is required when DTS specify in 'ranges' property non-zero offset between CPU and PCIe address space. To address recommendation by HW designers as specified in commit description of 6df6ba974a55, set default outbound parameters as PCIe MEM access without translation and therefore for this PCIe 'ranges' it is not needed to configure PCIe outbound window. For PCIe IO space is needed to configure aardvark PCIe outbound window. This patch fixes kernel crash when trying to access PCIe IO space. Link: https://lore.kernel.org/r/20210624215546.4015-2-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window configuration")
2021-08-20iommu/arm-smmu: Fix missing unlock on error in arm_smmu_device_group()Yang Yingliang
Add the missing unlock before return from function arm_smmu_device_group() in the error handling case. Fixes: b1a1347912a7 ("iommu/arm-smmu: Fix race condition during iommu_group creation") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210820074949.1946576-1-yangyingliang@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-20HID: logitech-hidpp: battery: provide CAPACITY property for newer devicesHamza Mahfooz
For devices that only support the BATTERY_VOLTAGE (0x1001) feature, UPower requires the additional information provided by this patch, to set them up. Signed-off-by: Hamza Mahfooz <someguy@effective-light.com> Reviewed-by: Filipe Laíns <lains@riseup.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: thrustmaster: Fix memory leak in thrustmaster_interrupts()Evgeny Novikov
thrustmaster_interrupts() does not free memory for send_buf when usb_interrupt_msg() fails. This is fixed by the given patch. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: thrustmaster: Fix memory leak in removeEvgeny Novikov
thrustmaster_remove() does not release memory for tm_wheel->change_request. This is fixed by the patch. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: thrustmaster: Fix memory leaks in probeEvgeny Novikov
When thrustmaster_probe() handles errors of usb_submit_urb() it does not free allocated resources and fails. The patch fixes that. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: elo: update the reference count of the usb device structureSalah Triki
Use usb_get_dev() to increment the reference count of the usb device structure in order to avoid releasing the structure while it is still in use. And use usb_put_dev() to decrement the reference count and thus, when it will be equal to 0 the structure will be released. Signed-off-by: Salah Triki <salah.triki@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20HID: logitech-hidpp: Use 'atomic_inc_return' instead of hand-writing itChristophe JAILLET
This function logs a warning if the workqueue gets too big. In order to save a few cycles, use 'atomic_inc_return()' instead of an 'atomic_inc()/atomic_read()' sequence. This axes a line of code and saves a 'atomic_read()' call. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-08-20spi: stm32: fix excluded_middle.cocci warningskernel test robot
drivers/spi/spi-stm32.c:915:23-25: WARNING !A || A && B is equivalent to !A || B Condition !A || A && B is equivalent to !A || B. Generated by: scripts/coccinelle/misc/excluded_middle.cocci Fixes: 7ceb0b8a3ced ("spi: stm32: finalize message either on dma callback or EOT") CC: Alain Volmat <alain.volmat@foss.st.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/20210713191004.GA14729@5eb5c2cbef84 Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-20Merge tag 'mlx5-updates-2021-08-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-08-19 This series introduces the support for two new mlx5 features: 1) Sample offload for tunneled traffic 2) devlink rate objects support 1) From Chris Mi: Sample offload for tunneled traffic ===================================================== Background and solution ----------------------- Currently the sample offload actions send the encapsulated packet to software. This series de-capsulates the packet before performing the sampling and set the tunnel properties on the skb metadata fields to make the behavior consistent with OVS sFlow. If de-capsulating first, we can't use the same match like before in default table. So instantiate a post action instance to continue processing the action list. If HW can preserve reg_c, also use the post action instance. Post action infrastructure -------------------------- Some tc actions are modeled in hardware using multiple tables causing a tc action list split. For example, CT action is modeled by jumping to a ct table which is controlled by nf flow table. sFlow jumps in hardware to a sample table, which continues to a "default table" where it should continue processing the action list. Multi table actions are modeled in hardware using a unique fte_id. The fte_id is set before jumping to a table. Split actions continue to a post-action table where the matched fte_id value continues the execution the tc action list. This series also introduces post action infrastructure. Both ct and sample use it. Sample for tunnel in TC SW -------------------------- tc filter add dev vxlan1 protocol ip parent ffff: prio 3 \ flower src_mac 24:25:d0:e1:00:00 dst_mac 02:25:d0:13:01:02 \ enc_src_ip 192.168.1.14 enc_dst_ip 192.168.1.13 \ enc_dst_port 4789 enc_key_id 4 \ action sample rate 1 group 6 \ action tunnel_key unset \ action mirred egress redirect dev enp4s0f0_1 MLX5 sample HW offload ---------------------- For the following typical flow table: +-------------------------------+ + original flow table + +-------------------------------+ + original match + +-------------------------------+ + sample action + other actions + +-------------------------------+ We translate the tc filter with sample action to the following HW model: +---------------------+ + original flow table + +---------------------+ + original match + +---------------------+ | set fte_id (if reg_c preserve cap) | do decap v +------------------------------------------------+ + Flow Sampler Object + +------------------------------------------------+ + sample ratio + +------------------------------------------------+ + sample table id | default table id + +------------------------------------------------+ | | v v +-----------------------------+ +-------------------+ + sample table + + default table + +-----------------------------+ +-------------------+ + forward to management vport + | +-----------------------------+ | +-------+------+ | |reg_c preserve cap | |or decap action v v +-----------------+ +-------------+ + per vport table + + post action + +-----------------+ +-------------+ + original match + +-----------------+ + other actions + +-----------------+ 2) From Dmytro Linkin: devlink rate object support for mlx5_core driver ======================================================================= HIGH-LEVEL OVERVIEW Devlink leaf rate objects created per vport (VF/SF, and PF on BlueField) in switchdev mode on devlink port registration. Implement devlink ops callbacks to create/destroy rate groups, set TX rate values of the vport/group, assign vport to the group. Driver accepts TX rate values as fraction of 1Mbps. Refactor existing eswitch QoS infrastructure to be accessible by legacy NDO rate API and new devlink rate API. NDO rate API is not removed/disabled in switchdev mode to not break existing users. Rate values configured with NDO rate API are not visible for devlink infrastructure, therefore APIs should not be used simultaneously. IMPLEMENTATION DETAILS Driver provide two level rate hierarchy to manage bandwidth - group level and vport level. Initially each vport added to internal unlimited group created by default. Each rate element (vport or group) receive bandwidth relative to its parent element (for groups the parent is a physical link itself) in a Round Robin manner, where element get bandwidth value according to its weight. Example: Created four rate groups with tx_share limits: $ devlink port function rate add \ pci/0000:06:00.0/group_1 tx_share 30gbit $ devlink port function rate add \ pci/0000:06:00.0/group_2 tx_share 20gbit $ devlink port function rate add \ pci/0000:06:00.0/group_3 tx_share 20gbit $ devlink port function rate add \ pci/0000:06:00.0/group_4 tx_share 10gbit Weights created in HW for each group are relative to the bigest tx_share value, which is 30gbit: <group_1> 1.0 <group_2> 0.67 <group_3> 0.67 <group_4> 0.33 Assuming link speed is 50 Gbit/sec and each group can sustain such amount of traffic, maximum bandwidth is 50 / (1.0 + 0.67 + 0.67 + 0.33) = ~18.75 Gbit/sec. Normilized bandwidth values for groups: <group_1> 18.75 * 1.0 = 18.75 Gbit/sec <group_2> 18.75 * 0.67 = 12.5 Gbit/sec <group_3> 18.75 * 0.67 = 12.5 Gbit/sec <group_4> 18.75 * 0.33 = 6.25 Gbit/sec If in example above group_1 doesn't produce any traffic, then maximum bandwidth becomes 50 / (0.67 + 0.67 + 0.33) = ~30.0 Gbit/sec. Normalized values: <group_2> 30.0 * 0.67 = 20.0 Gbit/sec <group_3> 30.0 * 0.67 = 20.0 Gbit/sec <group_4> 30.0 * 0.33 = 10.0 Gbit/sec Same normalization applied to each vport in the group. Normalized values are internal, therefore driver provides QoS tracepoints for next events: * vport rate element creation/deletion: * vport rate element configuration; * group rate element creation/deletion; * group rate element configuration. PATCHES OVERVIEW 1 - Moving and isolation of eswitch QoS logic in separate file; 2 - Implement devlink leaf rate object support for vports; 3 - Implement rate groups creation/deletion; 4 - Implement TX rate management for the groups; 5 - Implement parent set for vports; 6 - Eswitch QoS tracepoints. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20Merge tag 'for-net-next-2021-08-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for Foxconn Mediatek Chip - Add support for LG LGSBWAC92/TWCM-K505D - hci_h5 flow control fixes and suspend support - Switch to use lock_sock for SCO and RFCOMM - Various fixes for extended advertising - Reword Intel's setup on btusb unifying the supported generations ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20asus-wmi: Add support for platform_profileLuke D. Jones
Add initial support for platform_profile where the support is based on availability of ASUS_THROTTLE_THERMAL_POLICY. Because throttle_thermal_policy is used by platform_profile and is writeable separately to platform_profile any userspace changes to throttle_thermal_policy need to notify platform_profile. In future throttle_thermal_policy sysfs should be removed so that only one method controls the laptop power profile. Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20210818190731.19170-2-luke@ljones.dev Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-08-20platform/x86: lg-laptop: Use correct event for keyboard backlight FN-keyMatan Ziv-Av
Use led_classdev_notify_brightness_hw_changed() instead of F16 key. Signed-off-by: Matan Ziv-Av <matan@svgalib.org> Link: https://lore.kernel.org/r/2196990f167efe6a42d51fb85f4db4cdf4d9e80e.1629291912.git.matan@svgalib.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-08-20platform/x86: lg-laptop: Use correct event for touchpad toggle FN-keyMatan Ziv-Av
Send F21 which is the standard for this key, instead of F13. Signed-off-by: Matan Ziv-Av <matan@svgalib.org> Link: https://lore.kernel.org/r/b847895c1f170e2e59df5757a4d603d28149f648.1629291912.git.matan@svgalib.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-08-20platform/x86: lg-laptop: Support for battery charge limit on newer modelsMatan Ziv-Av
Add support for the difference between various models: - Use dmi to detect laptop model. - 2019 and newer models use _wmbb method to set battery charge limit. Signed-off-by: Matan Ziv-Av <matan@svgalib.org> Link: https://lore.kernel.org/r/bd6922a412e50c2dcfb7ce24fc8687f577181d65.1629291912.git.matan@svgalib.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-08-20platform/x86: BIOS SAR driver for Intel M.2 ModemShravan S
Dynamic BIOS SAR driver exposing dynamic SAR information from BIOS The Dynamic SAR (Specific Absorption Rate) driver uses ACPI DSM (Device Specific Method) to communicate with BIOS and retrieve dynamic SAR information and change notifications. The driver uses sysfs to expose this data to userspace via read and notify. Sysfs interface is documented in detail under: Documentation/ABI/testing/sysfs-driver-intc_sar Signed-off-by: Shravan S <s.shravan@intel.com> Link: https://lore.kernel.org/r/20210723211452.27995-2-s.shravan@intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-08-20platform/x86: intel_pmt_telemetry: Ignore zero sized entriesDavid E. Box
Some devices may expose non-functioning entries that are reserved for future use. These entries have zero size. Ignore them during probe. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20210817224018.1013192-5-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-08-20platform/x86: ideapad-laptop: Fix Legion 5 Fn lock LEDMeng Dong
This patch fixes the bug 212671. Althrough the Fn lock (Fn + Esc) works on Legion 5 (R7000P), its LED light does not change with the state. This modification sets the Fn lock state to its current value on receiving the wmi event 8FC0DE0C-B4E4-43FD-B0F3-8871711C1294 to update the LED state. Signed-off-by: Meng Dong <whenov@gmail.com> Link: https://lore.kernel.org/r/20210817171203.12855-1-whenov@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-08-20platform/x86: gigabyte-wmi: add support for B450M S2H V2Thomas Weißschuh
Reported as working here: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-901207693 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20210818164435.99821-1-linux@weissschuh.net Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-08-20leds: pca955x: Switch to i2c probe_newEddie James
The deprecated i2c probe functionality doesn't work with OF compatible strings, as it only checks for the i2c device id. Switch to the new way of probing and grab the match data to select the chip type. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-08-20leds: pca955x: Let the core process the fwnodeEddie James
Much of the fwnode processing in the PCA955x driver is now in the LEDs core driver, so pass the fwnode in the init data when registering the LED device. In order to preserve the existing naming scheme, check for an empty name and set it to the LED number. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-08-20leds: pca955x: Implement the default-state propertyEddie James
In order to retain the LED state after a system reboot, check the documented default-state device tree property during initialization. Modify the behavior of the probe according to the property. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-08-20leds: pca955x: Add brightness_get functionEddie James
Add a function to fetch the state of the hardware LED. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-08-20leds: pca955x: Clean up code formattingEddie James
Format the code. Add some variables to help shorten lines. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-08-20leds: leds-core: Implement the retain-state-shutdown propertyEddie James
Read the retain-state-shutdown device tree property to set the existing LED_RETAIN_AT_SHUTDOWN flag. Then check the flag when unregistering, and if set, don't set the brightness to OFF. This is useful for systems that want to keep the HW state of the LED across reboots. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-08-20Merge tag 'amd-drm-fixes-5.14-2021-08-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.14-2021-08-18: amdgpu: - vega10 SMU workload fix - DCN VM fix - DCN 3.01 watermark fix amdkfd: - SVM fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210818225137.4070-1-alexander.deucher@amd.com
2021-08-19net/mlx5: E-switch, Add QoS tracepointsDmytro Linkin
Add tracepoints to log QoS enabling/disabling/configuration for vports and rate groups. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Huy Nguyen <huyn@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-19net/mlx5: E-switch, Allow to add vports to rate groupsDmytro Linkin
Implement eswitch API that allows updating rate groups. If group pointer is NULL, then move the vport to internal unlimited group zero. Implement devlink_ops->rate_parent_node_set() callback in the terms of the new eswitch group update API. Enable QoS for all group's elements if a group has allocated BW share. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Huy Nguyen <huyn@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-19net/mlx5: E-switch, Allow setting share/max tx rate limits of rate groupsDmytro Linkin
Provide eswitch API to allow controlling group rate limits. Use it to implement devlink_ops->mlx5_devlink_rate_node_tx_{share|max}_set(). The share rate will create relative bandwidth share on the groups level while within the group the user can set shared rate on the member vports of that group and this rate will be relative to the group's share rate. The group with the highest shared rate will get a BW share of 100 and the rest of the groups will get a value that reflects the ratio between their share rate and the maximum share rate. Example: Created four rate groups with tx_share limits: $ devlink port function rate add \ pci/0000:06:00.0/group_1 tx_share 30gbit $ devlink port function rate add \ pci/0000:06:00.0/group_2 tx_share 20gbit $ devlink port function rate add \ pci/0000:06:00.0/group_3 tx_share 20gbit $ devlink port function rate add \ pci/0000:06:00.0/group_4 tx_share 10gbit Assuming link speed is 50 Gbit/sec ratio divider will be 50 / (30+20+20+10) = 0.625. Normalized rate values for the groups: <group_1> 30 * 0.625 = 18.75 Gbit/sec <group_2> 20 * 0.625 = 12.5 Gbit/sec <group_3> 20 * 0.625 = 12.5 Gbit/sec <group_4> 10 * 0.625 = 6.25 Gbit/sec Rate group with unlimited tx_share rate will receive minimum BW value (1Mbit/sec) if presented any group with tx_share rate limit. This allow to not drop all packets in case of heavy traffic. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Huy Nguyen <huyn@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-19net/mlx5: E-switch, Introduce rate limiting groups APIDmytro Linkin
Extend eswitch API with rate limiting groups: - Define new struct mlx5_esw_rate_group that is used to hold all internal group data. - Implement functions that allow creation, destruction and cleanup of groups. - Assign all vports to internal unlimited zero group by default. This commit lays the groundwork for group rate limiting by implementing devlink_ops->rate_node_{new|del}() callbacks to support creating and deleting groups through devlink rate node objects. APIs that allows setting rates and adding/removing members are implemented in following patches. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Huy Nguyen <huyn@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-19net/mlx5: E-switch, Enable devlink port tx_{share|max} rate controlDmytro Linkin
Register devlink rate leaf object for every eswitch vport. Implement devlink ops that enable setting shared and max tx rates through devlink API. Extract common eswitch code from existing tx rate set function that is accessed through NDO to be reused for the devlink. Values configured with NDO API are not visible for the devlink API, therefore shouldn't be used simultaneously. When normalizing the BW share value, dividing the desired minimum rate by the common divider results in losing information since the quotient is rounded down. This has a significant affect on configurations of low rate where the round down eliminates a large percentage of the total rate. To improve the formula, round up the division result to make sure that the BW share is at least the value it was supposed to be and won't lost a significant amount of the expected value. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Huy Nguyen <huyn@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-19net/mlx5: E-switch, Move QoS related code to dedicated fileDmytro Linkin
Move eswitch QoS related code into dedicated file. Provide eswitch API to access this code meaning it is isolated and restricted to be used only by eswitch.c. Exception is legacy NDO vf set rate, which moved to esw/legacy.c. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Huy Nguyen <huyn@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-19net/mlx5e: TC, Support sample offload action for tunneled trafficChris Mi
Currently the sample offload actions send the encapsulated packet to software. This commit decapsulates the packet before performing the sampling and set the tunnel properties on the skb metadata fields to make the behavior consistent with OVS sFlow. If decapsulating first, we can't use the same match like before in default table. So instantiate a post action instance to continue processing the action list. If HW can preserve reg_c, also use the post action instance. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-19net/mlx5e: TC, Restore tunnel info for sample offloadChris Mi
Currently the sample offload actions send the encapsulated packet to software. sFlow expects tunneled packets to be decapsulated while having the tunnel properties on the skb metadata fields. Reuse the functions used by connection tracking to map the outer header properties to a unique id. The next patch will use that id to restore the tunnel information of decapsulated packets onto the skb. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-19net/mlx5e: TC, Remove CONFIG_NET_TC_SKB_EXT dependency when restoring tunnelChris Mi
CONFIG_NET_TC_SKB_EXT controls the SKB extension support for restoring chain ids. SKB extension is not required for tunnel restoration. Remove the CONFIG_NET_TC_SKB_EXT dependency as a pre-step for using the tunnel restore methods for sample offload use cases. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-19net/mlx5e: Refactor ct to use post action infrastructureChris Mi
Move post action table management to common library providing add/del/get API. Refactor the ct action offload to use the common API. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-21 07:59:57 +0000