| Age | Commit message (Collapse) | Author |
|---|
|
During port creation the driver instructs the device to advertise all
the supported link modes queried from the device.
Since cited commit not all the link modes supported by the device are
supported by the driver. This can result in the device negotiating a
link mode that is not recognized by the driver causing ethtool to show
an unsupported speed:
$ ethtool swp1
...
Speed: Unknown!
This is especially problematic when the netdev is enslaved to a bond, as
the bond driver uses unknown speed as an indication that the link is
down:
[13048.900895] net_ratelimit: 86 callbacks suppressed
[13048.900902] t_bond0: (slave swp52): failed to get link speed/duplex
[13048.912160] t_bond0: (slave swp49): failed to get link speed/duplex
Fix this by making sure that only link modes that are supported by both
the device and the driver are advertised.
Fixes: b97cd891268d ("mlxsw: Remove 56G speed support")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The system EID that is defined by the ISM driver is not correct. Using
an incorrect system EID allows to communicate with remote Linux systems
that use the same incorrect system EID, but when it comes to
interoperability with other operating systems then the system EIDs do
never match which prevents SMC-Dv2 communication.
Using the correct system EID fixes this problem.
Fixes: 201091ebb2a1 ("net/smc: introduce System Enterprise ID (SEID)")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current code sets up the filter action field before
rewrites are set up. When the action 'switch' is used
with rewrites, this may result in initial few packets
that get switched out don't have rewrites applied
on them.
So, make sure filter action is set up along with rewrites
or only after everything else is set up for rewrites.
Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters")
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Link: https://lore.kernel.org/r/20201023115852.18262-1-rajur@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Smatch complains that "ret" might be uninitialized if we don't enter
the loop. We do always enter the loop so it's a false positive, but
it's cleaner to just return a literal zero and that silences the
warning as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201023112212.GA282278@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The code to try to shut up sparse warnings about questionable locking
didn't shut up sparse: it made the result not parse as valid C at all,
since the end result now has a label with no statement.
The proper fix is to just always lock the hardware, the same way Bart
did in commit 8ae178760b23 ("scsi: qla2xxx: Simplify the functions for
dumping firmware"). That avoids the whole problem with having locking
that is not statically obvious.
But in the meantime, just remove the incorrect attempt at trying to
avoid a sparse warning that just made things worse.
This was exposed by commit 3e6efab865ac ("scsi: qla2xxx: Fix reset of
MPI firmware"), very similarly to how commit cbb01c2f2f63 ("scsi:
qla2xxx: Fix MPI failure AEN (8200) handling") exposed the same problem
in another place, and caused that commit 8ae178760b23.
Please don't add code to just shut up sparse without actually fixing
what sparse complains about.
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Arun Easi <aeasi@marvell.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some drivers (such as EFA) have a GID table, but aren't IB/RoCE devices.
Remove the unnecessary rdma_ib_or_roce() check.
This fixes rdma-core failures for EFA when it uses the new ioctl interface
for querying the GID table.
Fixes: 9f85cbe50aa0 ("RDMA/uverbs: Expose the new GID query API to user space")
Link: https://lore.kernel.org/r/20201026082621.32463-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When a mlx5 core devlink instance is reloaded in different net namespace,
its associated IB device is deleted and recreated.
Example sequence is:
$ ip netns add foo
$ devlink dev reload pci/0000:00:08.0 netns foo
$ ip netns del foo
mlx5 IB device needs to attach and detach the netdevice to it through the
netdev notifier chain during load and unload sequence. A below call graph
of the unload flow.
cleanup_net()
down_read(&pernet_ops_rwsem); <- first sem acquired
ops_pre_exit_list()
pre_exit()
devlink_pernet_pre_exit()
devlink_reload()
mlx5_devlink_reload_down()
mlx5_unload_one()
[...]
mlx5_ib_remove()
mlx5_ib_unbind_slave_port()
mlx5_remove_netdev_notifier()
unregister_netdevice_notifier()
down_write(&pernet_ops_rwsem);<- recurrsive lock
Hence, when net namespace is deleted, mlx5 reload results in deadlock.
When deadlock occurs, devlink mutex is also held. This not only deadlocks
the mlx5 device under reload, but all the processes which attempt to
access unrelated devlink devices are deadlocked.
Hence, fix this by mlx5 ib driver to register for per net netdev notifier
instead of global one, which operats on the net namespace without holding
the pernet_ops_rwsem.
Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload")
Link: https://lore.kernel.org/r/20201026134359.23150-1-parav@nvidia.com
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The patch referenced below has a typo that results in using the wrong L2
header size for outbound traffic. (V4 <-> V6).
It also breaks kernel-side RC traffic because they use AVs that use
RDMA_NETWORK_XXX enums instead of RXE_NETWORK_TYPE_XXX enums. Fix this by
transcoding between these enum types.
Fixes: e0d696d201dd ("RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI")
Link: https://lore.kernel.org/r/20201016211343.22906-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In commit 8d98416a55eb ("scsi: hisi_sas: Switch v3 hw to MQ"), the dispatch
function was changed to choose the delivery queue based on the request tag
HW queue index.
This heavily degrades performance for v2 hw, since the HW queues are not
exposed there, and, as such, HW queue #0 is used for every command.
Revert to previous behaviour for when nr_hw_queues is not set, that being
to choose the HW queue based on target device index.
Link: https://lore.kernel.org/r/1602750425-240341-1-git-send-email-john.garry@huawei.com
Fixes: 8d98416a55eb ("scsi: hisi_sas: Switch v3 hw to MQ")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros:
- Move the dependency check of CONFIG_KGDB into Kconfig
- Unify the kgdb_breakpoint() call
- Drop the non-existing CONFIG_HAVE_KGDB
Also align the behavior of ASSERT() macro in both cases with and
without CONFIG_DEBUG_KERNEL_DC.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either
CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a
kernel panic when no kdb stuff is attached, since the
kgdb_breakpoint() call issues INT3. It's nothing but a surprise for
normal end-users.
For avoiding the pitfall, make the kgdb_breakpoint() call only when
CONFIG_DEBUG_KERNEL_DC is set.
https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently both error code paths handled in dal_gpio_open_ex() issues
ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if
CONFIG_KGDB is enabled. Since basically both are non-critical errors
and can be recovered, drop those assert calls and use a safer one,
BREAK_TO_DEBUGGER(), for allowing the debugging, instead.
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It looks this was accidently lost in a follow up patch.
dc context is large and we don't need contiguous pages.
Fixes: e4863f118a7d ("drm/amd/display: Multi display cause system lag on mode change")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Alex Xu <alex_y_xu@yahoo.ca>
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Cc: stable@vger.kernel.org
|
|
why:
oem-related ddc read/write fails without these regs
how:
copy from hw_factory_dcn20.c
Signed-off-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
After a loss of transport due to an adapter migration or crash/disconnect
from the host partner there is a tiny window where we can race adjusting
the request_limit of the adapter. The request limit is atomically
increased/decreased to track the number of inflight requests against the
allowed limit of our VIOS partner.
After a transport loss we set the request_limit to zero to reflect this
state. However, there is a window where the adapter may attempt to queue a
command because the transport loss event hasn't been fully processed yet
and request_limit is still greater than zero. The hypercall to send the
event will fail and the error path will increment the request_limit as a
result. If the adapter processes the transport event prior to this
increment the request_limit becomes out of sync with the adapter state and
can result in SCSI commands being submitted on the now reset connection
prior to an SRP Login resulting in a protocol violation.
Fix this race by protecting request_limit with the host lock when changing
the value via atomic_set() to indicate no transport.
Link: https://lore.kernel.org/r/20201025001355.4527-1-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prevent null pointer access when checking odm tree.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>
|
|
Ideally this should be a multiple of the VM block size.
2MB should at least fit for Vega/Navi.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[why]
get_pixel_clk_frequency_100hz is undefined in clock_source_funcs.
[how]
set function pointer: ".get_pixel_clk_frequency_100hz = get_pixel_clk_frequency_100hz"
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
2MB area is reserved at top inside VM.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The blockchain SKU has no display and video support, remove them.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The mptscsih_remove() function triggers a kernel oops if the Scsi_Host
pointer (ioc->sh) is NULL, as can be seen in this syslog:
ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
Begin: Waiting for root file system ...
scsi host2: error handler thread failed to spawn, error = -4
mptspi: ioc0: WARNING - Unable to register controller with SCSI subsystem
Backtrace:
[<000000001045b7cc>] mptspi_probe+0x248/0x3d0 [mptspi]
[<0000000040946470>] pci_device_probe+0x1ac/0x2d8
[<0000000040add668>] really_probe+0x1bc/0x988
[<0000000040ade704>] driver_probe_device+0x160/0x218
[<0000000040adee24>] device_driver_attach+0x160/0x188
[<0000000040adef90>] __driver_attach+0x144/0x320
[<0000000040ad7c78>] bus_for_each_dev+0xd4/0x158
[<0000000040adc138>] driver_attach+0x4c/0x80
[<0000000040adb3ec>] bus_add_driver+0x3e0/0x498
[<0000000040ae0130>] driver_register+0xf4/0x298
[<00000000409450c4>] __pci_register_driver+0x78/0xa8
[<000000000007d248>] mptspi_init+0x18c/0x1c4 [mptspi]
This patch adds the necessary NULL-pointer checks. Successfully tested on
a HP C8000 parisc workstation with buggy SCSI drives.
Link: https://lore.kernel.org/r/20201022090005.GA9000@ls3530.fritz.box
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When the fcport is about to be deleted we should return EBUSY instead of
ENODEV. Only for EBUSY will the request be requeued in a multipath setup.
Also return EBUSY when the firmware has not yet started to avoid dropping
the request.
Link: https://lore.kernel.org/r/20201014073048.36219-1-dwagner@suse.de
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The current scanning mechanism is supposed to fall back to a synchronous
host scan if an asynchronous scan is in progress. However, this rule isn't
strictly respected, scsi_prep_async_scan() doesn't hold scan_mutex when
checking shost->async_scan. When scsi_scan_host() is called concurrently,
two async scans on same host can be started and a hang in do_scan_async()
is observed.
Fixes this issue by checking & setting shost->async_scan atomically with
shost->scan_mutex.
Link: https://lore.kernel.org/r/20201010032539.426615-1-ming.lei@redhat.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
No ECC initialization should happen during the host controller probe.
In fact, we need the probe function to call nand_scan() in order to:
- identify the device, its capabilities and constraints (nand_scan_ident())
- configure the ECC engine accordingly (->attach_chip())
- scan its content and prepare the core (nand_scan_tail())
Moving these lines to fsl_ifc_attach_chip() fixes a regression caused by
a previous commit supposed to clarify these steps.
Based on a fix done for the mxc_nand driver by Miquel Raynal.
Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits")
Reported-by: Han Xu <xhnjupt@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Han Xu <xhnjupt@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201016132626.30112-1-festevam@gmail.com
|
|
No ECC initialization should happen during the host controller probe.
In fact, we need the probe function to call nand_scan() in order to:
- identify the device, its capabilities and constraints (nand_scan_ident())
- configure the ECC engine accordingly (->attach_chip())
- scan its content and prepare the core (nand_scan_tail())
Moving these lines to mxcnd_attach_chip() fixes a regression caused by
a previous commit supposed to clarify these steps.
When moving the ECC initialization from probe() to attach(), get rid
of the pdata usage to determine the engine type and let the core decide
instead.
Tested on a imx27-pdk board.
Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits")
Reported-by: Fabio Estevam <festevam@gmail.com>
Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201016213613.1450-1-festevam@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
ARM SCMI fixes for v5.10
Handful of fixes, some of them fixing issues since SCMI was merged.
It indicates that it is getting used now and people are finding bugs.
Fixes include unblocking multiple thread access with SMC/HVC transport,
ARCH_COLD_RESET value, locking in notifications, avoiding workqueue
name duplication with multiple instances of SCMI and adding missing
Rx size initialisation when using buffers for repeat transmits.
* tag 'scmi-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix duplicate workqueue name
firmware: arm_scmi: Fix locking in notifications
firmware: arm_scmi: Add missing Rx size re-initialisation
firmware: arm_scmi: Expand SMC/HVC message pool to more than one
firmware: arm_scmi: Fix ARCH_COLD_RESET
Link: https://lore.kernel.org/r/20201015123518.GA3839@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Originally this error path used to leak "bin" but then we accidentally
applied two separate commits to fix it and ended up with a double free.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201026094905.GA1634423@mwanda
|
|
The A33 has a different phase parameter in the Allwinner BSP on the
channel1 than the one currently applied. Fix this.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-3-maxime@cerno.tech
|
|
When using the scaler on the A10-like frontend with single-planar formats,
the current code will setup the channel 0 filter (used for the R or Y
component) with a different phase parameter than the channel 1 filter (used
for the G/B or U/V components).
This creates a bleed out that keeps repeating on of the last line of the
RGB plane across the rest of the display. The Allwinner BSP either applies
the same phase parameter over both channels or use a separate one, the
condition being whether the input format is YUV420 or not.
Since YUV420 is both subsampled and multi-planar, and since YUYV is
subsampled but single-planar, we can rule out the subsampling and assume
that the condition is actually whether the format is single or
multi-planar. And it looks like applying the same phase parameter over both
channels for single-planar formats fixes our issue, while we keep the
multi-planar formats working properly.
Reported-by: Taras Galchenko <tpgalchenko@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-2-maxime@cerno.tech
|
|
The scaler filter phase setup in the allwinner kernel has two different
cases for setting up the scaler filter, the first one using different phase
parameters for the two channels, and the second one reusing the first
channel parameters on the second channel.
The allwinner kernel has a third option where the horizontal phase of the
second channel will be set to a different value than the vertical one (and
seems like it's the same value than one used on the first channel).
However, that code path seems to never be taken, so we can ignore it for
now, and it's essentially what we're doing so far as well.
Since we will have always the same values across each components of the
filter setup for a given channel, we can simplify a bit our frontend
structure by only storing the phase value we want to apply to a given
channel.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-1-maxime@cerno.tech
|
|
We have a few leftovers from the merge window period in
drm-misc-next-fixes, let's bring them into drm-misc-fixes
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
This has not been required since commit 75229eca569f ("drm: Make
drm_encoder_helper_funcs optional").
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes
Reenable kernel login method for kernel TEE client API
The kernel TEE login method was accidentally disabled previously when
enabling a few other login methods, so fix that here.
* tag 'tee-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: client UUID: Skip REE kernel login method as well
Link: https://lore.kernel.org/r/20201013070918.GA3328976@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use drmm_mode_config_init() and drop the explicit calls to
drm_mode_config_cleanup().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The DRM core already takes care that encoder enable and disable calls
are balanced.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Replace the custom spinlock with the fast_io spinlock provided by
regmap.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This is the same code and comment that is already shared by imx-ldb,
imx-tve, and parallel-display in imx_drm_encoder_parse_of().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
|
|
ipu_mbus_code_to_colorspace, ipu_stride_to_bytes, and
ipu_pixelformat_is_planar are unused. Remove them.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The reserved-memory overlap detection code fails to detect overlaps if
either of the regions starts at address 0x0. The code explicitly checks
for and ignores such regions, apparently in order to ignore dynamically
allocated regions which have an address of 0x0 at this point. These
dynamically allocated regions also have a size of 0x0 at this point, so
fix this by removing the check and sorting the dynamically allocated
regions ahead of any static regions at address 0x0.
For example, there are two overlaps in this case but they are not
currently reported:
foo@0 {
reg = <0x0 0x2000>;
};
bar@0 {
reg = <0x0 0x1000>;
};
baz@1000 {
reg = <0x1000 0x1000>;
};
quux {
size = <0x1000>;
};
but they are after this patch:
OF: reserved mem: OVERLAP DETECTED!
bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000)
OF: reserved mem: OVERLAP DETECTED!
foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000)
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 453431a54934 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.
Since then a few more instances of kzfree() have slipped in.
Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull NTB fixes from Jon Mason.
* tag 'ntb-5.10' of git://github.com/jonmason/ntb:
NTB: Use struct_size() helper in devm_kzalloc()
ntb: intel: Fix memleak in intel_ntb_pci_probe
NTB: hw: amd: fix an issue about leak system resources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Regression fix for rc1 and stable kernels as well"
* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc updates from Helge Deller:
- During this merge window O_NONBLOCK was changed to become 000200000,
but we missed that the syscalls timerfd_create(), signalfd4(),
eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict
bit-wise check of the flags parameter.
To provide backward compatibility with existing userspace we
introduce parisc specific wrappers for those syscalls which filter
out the old O_NONBLOCK value and replaces it with the new one.
- Prevent HIL bus driver to get stuck when keyboard or mouse isn't
attached
- Improve error return codes when setting rtc time
- Minor documentation fix in pata_ns87415.c
* 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
ata: pata_ns87415.c: Document support on parisc with superio chip
parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage
hil/parisc: Disable HIL driver when it gets stuck
parisc: Improve error return codes when setting rtc time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- a series for the Xen pv block drivers adding module parameters for
better control of resource usge
- a cleanup series for the Xen event driver
* tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Documentation: add xen.fifo_events kernel parameter description
xen/events: unmask a fifo event channel only if it was masked
xen/events: only register debug interrupt for 2-level events
xen/events: make struct irq_info private to events_base.c
xen: remove no longer used functions
xen-blkfront: Apply changed parameter name to the document
xen-blkfront: add a parameter for disabling of persistent grants
xen-blkback: add a parameter for disabling of persistent grants
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom
Pull random32 updates from Willy Tarreau:
"Make prandom_u32() less predictable.
This is the cleanup of the latest series of prandom_u32
experimentations consisting in using SipHash instead of Tausworthe to
produce the randoms used by the network stack.
The changes to the files were kept minimal, and the controversial
commit that used to take noise from the fast_pool (f227e3ec3b5c) was
reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is
fed from various sources of activities (networking, scheduling) to
perturb the SipHash state using fast, non-trivially predictable data,
instead of keeping it fully deterministic. The goal is essentially to
make any occasional memory leakage or brute-force attempt useless.
The resulting code was verified to be very slightly faster on x86_64
than what is was with the controversial commit above, though this
remains barely above measurement noise. It was also tested on i386 and
arm, and build- tested only on arm64"
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
* tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom:
random32: add a selftest for the prandom32 code
random32: add noise from network and scheduling activity
random32: make prandom_u32() output unpredictable
|
|
registering the ACPI i2c devs
Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler()
before i2c_acpi_register_devices()")'s intention was to only move the
acpi_install_address_space_handler() call to the point before where
the ACPI declared i2c-children of the adapter where instantiated by
i2c_acpi_register_devices().
But i2c_acpi_install_space_handler() had a call to
acpi_walk_dep_device_list() hidden (that is I missed it) at the end
of it, so as an unwanted side-effect now acpi_walk_dep_device_list()
was also being called before i2c_acpi_register_devices().
Move the acpi_walk_dep_device_list() call to the end of
i2c_acpi_register_devices(), so that it is once again called *after*
the i2c_client-s hanging of the adapter have been created.
This fixes the Microsoft Surface Go 2 hanging at boot.
Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627
Reported-by: Rainer Finke <rainer@finke.cc>
Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Suggested-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
An interrupt submitted to an affinity change will always be left enabled
after plic_set_affinity() has been called, while the expectation is that
it should stay in whatever state it was before the call.
Preserving the configuration fixes a PWM hang issue on the Unleashed
board.
[ 919.015783] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 919.020922] rcu: 0-...0: (0 ticks this GP)
idle=7d2/1/0x4000000000000002 softirq=1424/1424 fqs=105807
[ 919.030295] (detected by 1, t=225825 jiffies, g=1561, q=3496)
[ 919.036109] Task dump for CPU 0:
[ 919.039321] kworker/0:1 R running task 0 30 2 0x00000008
[ 919.046359] Workqueue: events set_brightness_delayed
[ 919.051302] Call Trace:
[ 919.053738] [<ffffffe000930d92>] __schedule+0x194/0x4de
[ 982.035783] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 982.040923] rcu: 0-...0: (0 ticks this GP)
idle=7d2/1/0x4000000000000002 softirq=1424/1424 fqs=113325
[ 982.050294] (detected by 1, t=241580 jiffies, g=1561, q=3509)
[ 982.056108] Task dump for CPU 0:
[ 982.059321] kworker/0:1 R running task 0 30 2 0x00000008
[ 982.066359] Workqueue: events set_brightness_delayed
[ 982.071302] Call Trace:
[ 982.073739] [<ffffffe000930d92>] __schedule+0x194/0x4de
[..]
Fixes: bb0fed1c60cc ("irqchip/sifive-plic: Switch to fasteoi flow")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
[maz: tidy-up commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20201020081532.2377-1-greentime.hu@sifive.com
|
|
Add all remaining LP timer exti direct events, e.g. for LP Timer 2 to 5.
LP timer 1 is already listed (e.g. exti 47).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1602859219-15684-2-git-send-email-fabrice.gasnier@st.com
|
