summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-11-05Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - clarify a comment (Michael Kelley) - change a pr_warn() to pr_info() (Olaf Hering) * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Clarify comment on x2apic mode hv_balloon: disable warning when floor reached
2020-11-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "A few more merge window regressions that didn't make rc1: - New validation in the DMA layer triggers wrong use of the DMA layer in rxe, siw and rdmavt - Accidental change of a hypervisor facing ABI when widening the port speed u8 to u16 in vmw_pvrdma - Memory leak on error unwind in SRP target" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring RDMA/vmw_pvrdma: Fix the active_speed and phys_state value IB/srpt: Fix memory leak in srpt_add_one RDMA: Fix software RDMA drivers for dma mapping error
2020-11-05Merge tag 'spi-fix-v5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of driver specific fixes that have come in since the merge window, nothing too major here but all good to have" * tag 'spi-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl-dspi: fix wrong pointer in suspend/resume spi: bcm2835: fix gpio cs level inversion spi: imx: fix runtime pm support for !CONFIG_PM
2020-11-05Merge tag 'regulator-fix-v5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "An addition to MAINTAINERS plus a fix for a nasty bootstrapping problem which caused problems when we need to read the voltage of a regulator that is not yet available during initialization, we were not correctly distinguishing between this case and the case where a regulator is put into a bypass mode" * tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: defer probe when trying to get voltage from unresolved supply MAINTAINERS: Add entry for Qualcomm IPQ4019 VQMMC regulator
2020-11-05Merge tag 'pm-5.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix the device links support in runtime PM, correct mistakes in the cpuidle documentation, fix the handling of policy limits changes in the schedutil cpufreq governor, fix assorted issues in the OPP (operating performance points) framework and make one janitorial change. Specifics: - Unify the handling of managed and stateless device links in the runtime PM framework and prevent runtime PM references to devices from being leaked after device link removal (Rafael Wysocki). - Fix two mistakes in the cpuidle documentation (Julia Lawall). - Prevent the schedutil cpufreq governor from missing policy limits updates in some cases (Viresh Kumar). - Prevent static OPPs from being dropped by mistake (Viresh Kumar). - Prevent helper function in the OPP framework from returning prematurely (Viresh Kumar). - Prevent opp_table_lock from being held too long during removal of OPP tables with no more active references (Viresh Kumar). - Drop redundant semicolon from the Intel RAPL power capping driver (Tom Rix)" * tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: runtime: Resume the device earlier in __device_release_driver() PM: runtime: Drop pm_runtime_clean_up_links() PM: runtime: Drop runtime PM references to supplier on link removal powercap/intel_rapl: remove unneeded semicolon Documentation: PM: cpuidle: correct path name Documentation: PM: cpuidle: correct typo cpufreq: schedutil: Don't skip freq update if need_freq_update is set opp: Reduce the size of critical section in _opp_table_kref_release() opp: Fix early exit from dev_pm_opp_register_set_opp_helper() opp: Don't always remove static OPPs in _of_add_opp_table_v1()
2020-11-05Merge tag 'pci-v5.10-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix ACS regression that broke device pass-through (Rajat Jain) - Revert DesignWare ATU memory resource to use last entry to fix Tegra194 regression (Rob Herring) - Remove duplicate mvebu resource requests to fix regression on Turris Omnia (Rob Herring) * tag 'pci-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: mvebu: Fix duplicate resource requests PCI: dwc: Restore ATU memory resource setup to use last entry PCI: Always enable ACS even if no ACS Capability
2020-11-05ionic: check port ptr before useShannon Nelson
Check for corner case of port_init failure before using the port_info pointer. Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20201104195606.61184-1-snelson@pensando.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-05RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstringJason Gunthorpe
htmldocs fails with: drivers/infiniband/ulp/srpt/ib_srpt.c:630: warning: Function parameter or member 'port_cnt' not described in 'srpt_unregister_mad_agent' Fixes: 372a1786283e ("IB/srpt: Fix memory leak in srpt_add_one") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-05Merge tag 'nvme-5.10-2020-11-05' of git://git.infradead.org/nvme into block-5.10Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for 5.10: - revert a nvme_queue size optimization (Keith Bush) - fabrics timeout races fixes (Chao Leng and Sagi Grimberg)" * tag 'nvme-5.10-2020-11-05' of git://git.infradead.org/nvme: nvme-tcp: avoid repeated request completion nvme-rdma: avoid repeated request completion nvme-tcp: avoid race between time out and tear down nvme-rdma: avoid race between time out and tear down nvme: introduce nvme_sync_io_queues Revert "nvme-pci: remove last_sq_tail"
2020-11-05Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-opp' and 'powercap'Rafael J. Wysocki
* pm-cpufreq: cpufreq: schedutil: Don't skip freq update if need_freq_update is set * pm-cpuidle: Documentation: PM: cpuidle: correct path name Documentation: PM: cpuidle: correct typo * pm-opp: opp: Reduce the size of critical section in _opp_table_kref_release() opp: Fix early exit from dev_pm_opp_register_set_opp_helper() opp: Don't always remove static OPPs in _of_add_opp_table_v1() * powercap: powercap/intel_rapl: remove unneeded semicolon
2020-11-04r8169: work around short packet hw bug on RTL8125Heiner Kallweit
Network problems with RTL8125B have been reported [0] and with help from Realtek it turned out that this chip version has a hw problem with short packets (similar to RTL8168evl). Having said that activate the same workaround as for RTL8168evl. Realtek suggested to activate the workaround for RTL8125A too, even though they're not 100% sure yet which RTL8125 versions are affected. [0] https://bugzilla.kernel.org/show_bug.cgi?id=209839 Fixes: 0439297be951 ("r8169: add support for RTL8125B") Reported-by: Maxim Plotnikov <wgh@torlan.ru> Tested-by: Maxim Plotnikov <wgh@torlan.ru> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/8002c31a-60b9-58f1-f0dd-8fd07239917f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04USB: serial: option: add Telit FN980 composition 0x1055Daniele Palmas
Add the following Telit FN980 composition: 0x1055: tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-04PCI: mvebu: Fix duplicate resource requestsRob Herring
With commit 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()"), the DT 'ranges' is parsed and populated into resources when the host bridge is allocated. The resources are requested as well, but that happens a second time for the mvebu driver in mvebu_pcie_parse_request_resources(). We should only be requesting the additional resources added in mvebu_pcie_parse_request_resources(). These are not added by default because they use custom properties rather than standard DT address translation. Also, the bus ranges was also populated by default, so we can remove it from mvebu_pci_host_probe(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209729 Fixes: 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()") Link: https://lore.kernel.org/r/20201023145252.2691779-1-robh@kernel.org Reported-by: vtolkm@googlemail.com Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@armlinux.org.uk>
2020-11-04PCI: dwc: Restore ATU memory resource setup to use last entryRob Herring
Prior to commit 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources"), the DWC driver was setting up the last memory resource rather than the first memory resource. This doesn't matter for most platforms which only have 1 memory resource, but it broke Tegra194 which has a 2nd (prefetchable) memory region that requires an ATU entry. The first region on Tegra194 relies on the default 1:1 pass-thru of outbound transactions and doesn't need an ATU entry. Fixes: 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources") Link: https://lore.kernel.org/r/20201026154852.221483-1-robh@kernel.org Reported-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2020-11-04Merge tag 'linux-can-fixes-for-5.10-20201103' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-03 The first two patches are by Oleksij Rempel and they add a generic can-controller Device Tree yaml binding and convert the text based binding of the flexcan driver to a yaml based binding. Zhang Changzhong's patch fixes a remove_proc_entry warning in the AF_CAN core. A patch by me fixes a kfree_skb() call from IRQ context in the rx-offload helper. Vincent Mailhol contributes a patch to prevent a call to kfree_skb() in hard IRQ context in can_get_echo_skb(). Oliver Hartkopp's patch fixes the length calculation for RTR CAN frames in the __can_get_echo_skb() helper. Oleksij Rempel's patch fixes a use-after-free that shows up with j1939 in can_create_echo_skb(). Yegor Yefremov contributes 4 patches to enhance the j1939 documentation. Zhang Changzhong's patch fixes a hanging task problem in j1939_sk_bind() if the netdev is down. Then there are three patches for the newly added CAN_ISOTP protocol. Geert Uytterhoeven enhances the kconfig help text. Oliver Hartkopp's patch adds missing RX timeout handling in listen-only mode and Colin Ian King's patch decreases the generated object code by 926 bytes. Zhang Changzhong contributes a patch for the ti_hecc driver that fixes the error path in the probe function. Navid Emamdoost's patch for the xilinx_can driver fixes the error handling in case of failing pm_runtime_get_sync(). There are two patches for the peak_usb driver. Dan Carpenter adds range checking in decode operations and Stephane Grosjean's patch fixes a timestamp wrapping problem. Stephane Grosjean's patch for th peak_canfd driver fixes echo management if loopback is on. The next three patches all target the mcp251xfd driver. The first one is by me and it increased the severity of CRC read error messages. The kernel test robot removes an unneeded semicolon and Tom Rix removes unneeded break in several switch-cases. The last 4 patches are by Joakim Zhang and target the flexcan driver, the first three fix ECC related device specific quirks for the LS1021A, LX2160A and the VF610 SoC. The last patch disable wakeup completely upon driver remove. * tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: (27 commits) can: flexcan: flexcan_remove(): disable wakeup completely can: flexcan: add ECC initialization for VF610 can: flexcan: add ECC initialization for LX2160A can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A can: mcp251xfd: remove unneeded break can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping can: peak_usb: add range checking in decode operations can: xilinx_can: handle failure cases of pm_runtime_get_sync can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path can: isotp: padlen(): make const array static, makes object smaller can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode can: isotp: Explain PDU in CAN_ISOTP help text can: j1939: j1939_sk_bind(): return failure if netdev is down can: j1939: use backquotes for code samples can: j1939: swap addr and pgn in the send example can: j1939: fix syntax and spelling can: j1939: rename jacd tool ... ==================== Link: https://lore.kernel.org/r/<20201103220636.972106-1-mkl@pengutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04spi: fsl-dspi: fix wrong pointer in suspend/resumeZhao Qiang
Since commit 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path"), this driver causes a "NULL pointer dereference" in dspi_suspend/resume. This is because since this commit, the drivers private data point to "dspi" instead of "ctlr", the codes in suspend and resume func were not modified correspondly. Fixes: 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path") Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201103020546.1822-1-qiang.zhao@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-04drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINEAlex Deucher
No need for a separate config option at this point. Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amd/display: Add green_sardine support to DMRoman Li
Display Manager support for green_sardine Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amd/display: Add green_sardine support to DCRoman Li
Display Core support for green_sardine Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: enable vcn support for green_sardine (v2)Thong Thai
Enable Green_Sardine VCN support and VCN firmware loading v2: use apu flags Signed-off-by: Thong Thai <thong.thai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: enable green_sardine_asd.bin loading (v2)Aaron Liu
This patch enable green_sardine_asd.bin loading. v2: use apu flags Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu/sdma: add sdma engine support for green_sardine (v2)Prike Liang
Initialize the SDMA IP for green_sardine. v2: use apu flags Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: add gfx support for green_sardine (v2)Prike Liang
Enable the gfx base HW function of green_sardine. v2: use apu flags Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: add soc15 common ip block support for green_sardine (v3)Prike Liang
This patch adds common ip support for green_sardine. v2: use apu flags, squash in CG/PG enablement v3: rebase Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: add green_sardine support for gpu_info and ip block setting (v2)Prike Liang
This patch adds green_sardine support for gpu_info firmware and ip block setting. v2: use apu flag Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: add Green_Sardine APU flagAlex Deucher
Will be used for Green_Sardine which is a new APU. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231Daniele Palmas
Add following Telit LE910Cx compositions: 0x1203: rndis, tty, adb, tty, tty, tty, tty 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty 0x1231: rndis, tty, adb, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com [ johan: add comments after entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-04USB: serial: cyberjack: fix write-URB completion raceJohan Hovold
The write-URB busy flag was being cleared before the completion handler was done with the URB, something which could lead to corrupt transfers due to a racing write request if the URB is resubmitted. Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-03drm/amdgpu: resolved ASD loading issue on siennaJohn Clements
updated fw header v2 parser to set asd fw memory Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.9.x
2020-11-03amdkfd: Check kvmalloc return before memcpyKent Russell
If we can't kvmalloc the pcrat_image, then we shouldn't memcpy Signed-off-by: Kent Russell <kent.russell@amd.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-03drm/amdgpu: update golden setting for sienna_cichlidLikun Gao
Update golden setting for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-11-03amd/amdgpu: Disable VCN DPG mode for PicassoVeerabadhran Gopalakrishnan
Concurrent operation of VCN and JPEG decoder in DPG mode is causing ring timeout due to power state. Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-03drm/amdgpu/swsmu: remove duplicate call to smu_set_default_dpm_tableAlex Deucher
For kernel 5.10, this function was called twice right next to each other in the same function due to what looks like a mis-merge. Remove one of them. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-03drm/i915: Hold onto an explicit ref to i915_vma_work.pinnedChris Wilson
Since __vma_release is run by a kworker after the fence has been signaled, it is no longer protected by the active reference on the vma, and so the alias of vw->pinned to vma->obj is also not protected by a reference on the object. Add an explicit reference for vw->pinned so it will always be safe. Found by inspection. Fixes: 54d7195f8c64 ("drm/i915: Unpin vma->obj on early error") Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.6+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201102161931.30031-1-chris@chris-wilson.co.uk (cherry picked from commit bc73e5d33048b7ab5f12b11b5d923700467a8e1d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-11-03drm/i915/gt: Flush xcs before tgl breadcrumbsChris Wilson
In a simple test case that writes to scratch and then busy-waits for the batch to be signaled, we observe that the signal is before the write is posted. That is bad news. Splitting the flush + write_dword into two separate flush_dw prevents the issue from being reproduced, we can presume the post-sync op is not so post-sync. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/216 Testcase: igt/gem_exec_fence/parallel Testcase: igt/i915_selftest/live/gt_timelines Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201102221057.29626-2-chris@chris-wilson.co.uk (cherry picked from commit 09212e81e5450743e5b06b27c4e344e4c45b630d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-11-03drm/i915/gt: Expose more parameters for emitting writes into the ringChris Wilson
Add another lower level to emit_ggtt_write so that the GGTT nature of the write is not hardcoded into the emitter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201102221057.29626-1-chris@chris-wilson.co.uk (cherry picked from commit 2739d8cfc50aafff49d599cc0a5bc855445e99a7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-11-03drm/i915: Fix encoder lookup during PSR atomic checkImre Deak
The atomic check hooks must look up the encoder to be used with a connector from the connector's atomic state, and not assume that it's the connector's current attached encoder. The latter one can change under the atomic check func, or can be unset yet as in the case of MST connectors. This fixes [ 7.940719] Oops: 0000 [#1] SMP NOPTI [ 7.944407] CPU: 2 PID: 143 Comm: kworker/2:2 Not tainted 5.6.0-1023-oem #23-Ubuntu [ 7.952102] Hardware name: Dell Inc. Latitude 7320/, BIOS 88.87.11 09/07/2020 [ 7.959278] Workqueue: events output_poll_execute [drm_kms_helper] [ 7.965511] RIP: 0010:intel_psr_atomic_check+0x37/0xa0 [i915] [ 7.971327] Code: 80 2d 06 00 00 20 74 42 80 b8 34 71 00 00 00 74 39 48 8b 72 08 48 85 f6 74 30 80 b8 f8 71 00 00 00 74 27 4c 8b 87 80 04 00 00 <41> 8b 78 78 83 ff 08 77 19 31 c9 83 ff 05 77 19 48 81 c1 20 01 00 [ 7.977541] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5 [ 7.990154] RSP: 0018:ffffb864c073fac8 EFLAGS: 00010202 [ 7.990155] RAX: ffff8c5d55ce0000 RBX: ffff8c5d54519000 RCX: 0000000000000000 [ 7.990155] RDX: ffff8c5d55cb30c0 RSI: ffff8c5d89a0c800 RDI: ffff8c5d55fcf800 [ 7.990156] RBP: ffffb864c073fac8 R08: 0000000000000000 R09: ffff8c5d55d9f3a0 [ 7.990156] R10: ffff8c5d55cb30c0 R11: 0000000000000009 R12: ffff8c5d55fcf800 [ 7.990156] R13: ffff8c5d55cb30c0 R14: ffff8c5d56989cc0 R15: ffff8c5d56989cc0 [ 7.990158] FS: 0000000000000000(0000) GS:ffff8c5d8e480000(0000) knlGS:0000000000000000 [ 8.047193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.052970] CR2: 0000000000000078 CR3: 0000000856500005 CR4: 0000000000760ee0 [ 8.060137] PKRU: 55555554 [ 8.062867] Call Trace: [ 8.065361] intel_digital_connector_atomic_check+0x53/0x130 [i915] [ 8.071703] intel_dp_mst_atomic_check+0x5b/0x200 [i915] [ 8.077074] drm_atomic_helper_check_modeset+0x1db/0x790 [drm_kms_helper] [ 8.083942] intel_atomic_check+0x92/0xc50 [i915] [ 8.088705] ? drm_plane_check_pixel_format+0x4f/0xb0 [drm] [ 8.094345] ? drm_atomic_plane_check+0x7a/0x3a0 [drm] [ 8.099548] drm_atomic_check_only+0x2b1/0x450 [drm] [ 8.104573] drm_atomic_commit+0x18/0x50 [drm] [ 8.109070] drm_client_modeset_commit_atomic+0x1c9/0x200 [drm] [ 8.115056] drm_client_modeset_commit_force+0x55/0x160 [drm] [ 8.120866] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xb0 [drm_kms_helper] [ 8.128415] drm_fb_helper_set_par+0x34/0x50 [drm_kms_helper] [ 8.134225] drm_fb_helper_hotplug_event.part.0+0xb4/0xe0 [drm_kms_helper] [ 8.141150] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper] [ 8.147481] intel_fbdev_output_poll_changed+0x6f/0xa0 [i915] [ 8.153287] drm_kms_helper_hotplug_event+0x2c/0x40 [drm_kms_helper] [ 8.159709] output_poll_execute+0x1aa/0x1c0 [drm_kms_helper] [ 8.165506] process_one_work+0x1e8/0x3b0 [ 8.169561] worker_thread+0x4d/0x400 [ 8.173249] kthread+0x104/0x140 [ 8.176515] ? process_one_work+0x3b0/0x3b0 [ 8.180726] ? kthread_park+0x90/0x90 [ 8.184416] ret_from_fork+0x1f/0x40 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2361 References: https://gitlab.freedesktop.org/drm/intel/-/issues/2486 Reported-by: William Tseng <william.tseng@intel.com> Reported-by: Cooper Chiou <cooper.chiou@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201027160928.3665377-1-imre.deak@intel.com (cherry picked from commit 00e5deb5c4f5fe367311465e720e65cfa1178792) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-11-03drm/i915/gt: Use the local HWSP offset during submissionChris Wilson
We wrap the timeline on construction of the next request, but there may still be requests in flight that have not yet finalized the breadcrumb. (The breadcrumb is delayed as we need engine-local offsets, and for the virtual engine that is not known until execution.) As such, by the time we write to the timeline's HWSP offset it may have changed, and we should use the value we preserved in the request instead. Though the window is small and infrequent (at full flow we can expect a timeline's seqno to wrap once every 30 minutes), the impact of writing the old seqno into the new HWSP is severe: the old requests are never completed, and the new requests are completed before they are even submitted. Fixes: ebece7539242 ("drm/i915: Keep timeline HWSP allocated until idle across the system") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201022064127.10159-1-chris@chris-wilson.co.uk (cherry picked from commit c10f6019d0b2dc8a6a62b55459f3ada5bc4e5e1a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-11-03drm/i915/gem: Flush coherency domains on first set-domain-ioctlChris Wilson
Avoid skipping what appears to be a no-op set-domain-ioctl if the cache coherency state is inconsistent with our target domain. This also has the utility of using the population of the pages to validate the backing store. The danger in skipping the first set-domain is leaving the cache inconsistent and submitting stale data, or worse leaving the clean data in the cache and not flushing it to the GPU. The impact should be small as it requires a no-op set-domain as the very first ioctl in a particular sequence not found in typical userspace. Reported-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com> Fixes: 754a25442705 ("drm/i915: Skip object locking around a no-op set-domain ioctl") Testcase: igt/gem_mmap_offset/blt-coherency Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019203825.10966-1-chris@chris-wilson.co.uk (cherry picked from commit 44c2200afcd59f441b43f27829b4003397cc495d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-11-03Merge tag 'gvt-fixes-2020-10-30' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi
drm-intel-fixes gvt-fixes-2020-10-30 - Fix HWSP reset handling during vGPU suspend/resume (Colin) - Apply flush workaround on APL now for possible guest hang (Colin) - Fix vGPU context pin/unpin also for host suspend regression with vGPU created (Colin) - more BXT/APL mmio cmd access fixes (Colin) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201030052117.GC27141@zhen-hp.sh.intel.com
2020-11-03chelsio/chtls: fix always leaking ctrl_skbVinay Kumar Yadav
Correct skb refcount in alloc_ctrl_skb(), causing skb memleak when chtls_send_abort() called with NULL skb. it was always leaking the skb, correct it by incrementing skb refs by one. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201102173909.24826-1-vinay.yadav@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03chelsio/chtls: fix memory leaks caused by a raceVinay Kumar Yadav
race between user context and softirq causing memleak, consider the call sequence scenario chtls_setkey() //user context chtls_peer_close() chtls_abort_req_rss() chtls_setkey() //user context work request skb queued in chtls_setkey() won't be freed because resources are already cleaned for this connection, fix it by not queuing work request while socket is closing. v1->v2: - fix W=1 warning. v2->v3: - separate it out from another memleak fix. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201102173650.24754-1-vinay.yadav@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03can: flexcan: flexcan_remove(): disable wakeup completelyJoakim Zhang
With below sequence, we can see wakeup default is enabled after re-load module, if it was enabled before, so we need disable wakeup in flexcan_remove(). | # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup | disabled | # echo enabled > /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup | # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup | enabled | # rmmod flexcan | # modprobe flexcan | # cat /sys/bus/platform/drivers/flexcan/5a8e0000.can/power/wakeup | enabled Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Fixes: 915f9666421c ("can: flexcan: add support for DT property 'wakeup-source'") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20201020184527.8190-1-qiangqing.zhang@nxp.com [mkl: streamlined commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: flexcan: add ECC initialization for VF610Joakim Zhang
For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to disable non-correctable errors interrupt and freeze mode, had better use FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory. Fixes: cdce844865bea ("can: flexcan: add vf610 support for FlexCAN") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20201020155402.30318-6-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: flexcan: add ECC initialization for LX2160AJoakim Zhang
After double check with Layerscape CAN owner (Pankaj Bansal), confirm that LX2160A indeed supports ECC feature, so correct the feature table. For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to disable non-correctable errors interrupt and freeze mode, had better use FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory. Fixes: 2c19bb43e5572 ("can: flexcan: add lx2160ar1 support") Cc: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20201020155402.30318-5-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021AJoakim Zhang
After double check with Layerscape CAN owner (Pankaj Bansal), confirm that LS1021A doesn't support ECC feature, so remove FLEXCAN_QUIRK_DISABLE_MECR quirk. Fixes: 99b7668c04b27 ("can: flexcan: adding platform specific details for LS1021A") Cc: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20201020155402.30318-4-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: mcp251xfd: remove unneeded breakTom Rix
A break is not needed if it is preceded by a return. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201019172412.31143-1-trix@redhat.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warningskernel test robot
drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c:176:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 875347fe5756 ("can: mcp25xxfd: add regmap infrastructure") Signed-off-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20201019120805.GA63693@ae4257e0ab22 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read ↵Marc Kleine-Budde
error messages During debugging it turned out that some people have setups where the SPI communication is more prone to CRC errors. Increase the severity of both the transfer retry and transfer failure message to give users feedback without the need to recompile the driver with debug enabled. Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Thomas Kopp <thomas.kopp@microchip.com> Link: http://lore.kernel.org/r/20201019190524.1285319-15-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is onStephane Grosjean
Echo management is driven by PUCAN_MSG_LOOPED_BACK bit, while loopback frames are identified with PUCAN_MSG_SELF_RECEIVE bit. Those bits are set for each outgoing frame written to the IP core so that a copy of each one will be placed into the rx path. Thus, - when PUCAN_MSG_LOOPED_BACK is set then the rx frame is an echo of a previously sent frame, - when PUCAN_MSG_LOOPED_BACK+PUCAN_MSG_SELF_RECEIVE are set, then the rx frame is an echo AND a loopback frame. Therefore, this frame must be put into the socket rx path too. This patch fixes how CAN frames are handled when these are sent while the can interface is configured in "loopback on" mode. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20201013153947.28012-1-s.grosjean@peak-system.com Fixes: 8ac8321e4a79 ("can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boards") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>