| Age | Commit message (Collapse) | Author |
|---|
|
In preparation for support for HDM-D and HDM-DB configuration
(device-memory, and device-memory with back-invalidate). Rename the current
type designators to use HOSTONLYMEM and DEVMEM as a suffix.
HDM-DB can be supported by devices that are not accelerators, so DEVMEM is
a more generic term for that case.
Fixup one location where this type value was open coded.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168679261369.3436160.7042443847605280593.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In support of the Linux CXL core scaling for a wider set of CXL devices,
allow for the creation of memdevs with some memory device capabilities
disabled. Specifically, allow for CXL devices outside of those claiming
to be compliant with the generic CXL memory device class code, like
vendor specific Type-2/3 devices that host CXL.mem. This implies, allow
for the creation of memdevs that only support component-registers, not
necessarily memory-device-registers (like mailbox registers). A memdev
derived from a CXL endpoint that does not support generic class code
expectations is tagged "CXL_DEVTYPE_DEVMEM", while a memdev derived from a
class-code compliant endpoint is tagged "CXL_DEVTYPE_CLASSMEM".
The primary assumption of a CXL_DEVTYPE_DEVMEM memdev is that it
optionally may not host a mailbox. Disable the command passthrough ioctl
for memdevs that are not CXL_DEVTYPE_CLASSMEM, and return empty strings
from memdev attributes associated with data retrieved via the
class-device-standard IDENTIFY command. Note that empty strings were
chosen over attribute visibility to maintain compatibility with shipping
versions of cxl-cli that expect those attributes to always be present.
Once cxl-cli has dropped that requirement this workaround can be
deprecated.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168679260782.3436160.7587293613945445365.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
'struct cxl_dev_state' makes too many assumptions about the capabilities
of a CXL device. In particular it assumes a CXL device has a mailbox and
all of the infrastructure and state that comes along with that.
In preparation for supporting accelerator / Type-2 devices that may not
have a mailbox and in general maintain a minimal core context structure,
make mailbox functionality a super-set of 'struct cxl_dev_state' with
'struct cxl_memdev_state'.
With this reorganization it allows for CXL devices that support HDM
decoder mapping, but not other general-expander / Type-3 capabilities,
to only enable that subset without the rest of the mailbox
infrastructure coming along for the ride.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168679260240.3436160.15520641540463704524.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
commit 14d788740774 ("cxl/mem: Consolidate CXL DVSEC Range enumeration
in the core")
...removed @info from 'struct cxl_dev_state', but neglected to remove
the corresponding kernel-doc entry. Complete the removal.
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/20230606121054.000069e1@Huawei.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168679259703.3436160.12583306507362357946.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
After Jonathan noticed [1] that 'struct cxl_dev_state' had a kernel-doc
entry without a corresponding struct attribute I ran the kernel-doc
script to see what else might be broken. Fix these warnings:
drivers/cxl/cxlmem.h:199: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Event Interrupt Policy
drivers/cxl/cxlmem.h:224: warning: Function parameter or member 'buf' not described in 'cxl_event_state'
drivers/cxl/cxlmem.h:224: warning: Function parameter or member 'log_lock' not described in 'cxl_event_state'
Note that scripts/kernel-doc only finds missing kernel-doc entries. It
does not warn on too many kernel-doc entries, i.e. it did not catch the
fact that @info refers to a not present member.
Link: http://lore.kernel.org/r/20230606121054.000069e1@Huawei.com [1]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168679259170.3436160.3686460404739136336.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The @map parameter to cxl_probe_X_registers() is filled in with the
mapping parameters of the register block. The @map parameter to
cxl_map_X_registers() only reads that information to perform the
mapping. Mark @map const for cxl_map_X_registers() to clarify that it is
only an input to those helpers.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168679258103.3436160.4941603739448763855.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Jonathan reports that failed attempts to reset a region (teardown its
HDM decoder configuration) mistakenly advance the state of the region
to "not committed". Revert to the previous state of the region on reset
failure so that the reset can be re-attempted.
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/20230316171441.0000205b@Huawei.com
Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168696507968.3590522.14484000711718573626.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_region_decode_reset() walks all the decoders associated with a given
region and disables them. Due to decoder ordering rules it is possible
that a switch in the topology notices that a given decoder can not be
shutdown before another region with a higher HPA is shutdown first. That
can leave the region in a partially committed state.
Capture that state in a new CXL_REGION_F_NEEDS_RESET flag and require
that a successful cxl_region_decode_reset() attempt must be completed
before cxl_region_probe() accepts the region.
This is a corollary for the bug that Jonathan identified in "CXL/region
: commit reset of out of order region appears to succeed." [1].
Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Link: http://lore.kernel.org/r/20230316171441.0000205b@Huawei.com [1]
Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168696507423.3590522.16254212607926684429.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Vikram raised a concern with the theoretical case of a CPU sending
MemClnEvict to a device that is not prepared to receive. MemClnEvict is
a message that is sent after a CPU has taken ownership of a cacheline
from accelerator memory (HDM-DB). In the case of hotplug or HDM decoder
reconfiguration it is possible that the CPU is holding old contents for
a new device that has taken over the physical address range being cached
by the CPU.
To avoid this scenario, invalidate caches prior to tearing down an HDM
decoder configuration.
Now, this poses another problem that it is possible for something to
speculate into that space while the decode configuration is still up, so
to close that gap also invalidate prior to establish new contents behind
a given physical address range.
With this change the cache invalidation is now explicit and need not be
checked in cxl_region_probe(), and that obviates the need for
CXL_REGION_F_INCOHERENT.
Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Fixes: d18bc74aced6 ("cxl/region: Manage CPU caches relative to DPA invalidation events")
Reported-by: Vikram Sethi <vsethi@nvidia.com>
Closes: http://lore.kernel.org/r/BYAPR12MB33364B5EB908BF7239BB996BBD53A@BYAPR12MB3336.namprd12.prod.outlook.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168696506886.3590522.4597053660991916591.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_dport
Same as for ports, also store the downstream port's Component Register
mappings, use struct cxl_dport for that.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-16-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CXL capabilities are stored in the Component Registers. To use them,
the specific I/O ranges of the capabilities must be determined by
probing the registers. For this, the whole Component Register range
needs to be mapped temporarily to detect the offset and length of a
capability range.
In order to use more than one capability of a component (e.g. RAS and
HDM) the Component Register are probed and its mappings created
multiple times. This also causes overlapping I/O ranges as the whole
Component Register range must be mapped again while a capability's I/O
range is already mapped.
Different capabilities cannot be setup at the same time. E.g. the RAS
capability must be made available as soon as the PCI driver is bound,
the HDM decoder is setup later during port enumeration. Moreover,
during early setup it is still unknown if a certain capability is
needed. A central capability setup is therefore not possible,
capabilities must be individually enabled once needed during
initialization.
To avoid a duplicate register probe and overlapping I/O mappings, only
probe the Component Registers one time and store the Component
Register mapping in struct port. The stored mappings can be used later
to iomap the capability register range when enabling the capability,
which will be implemented in a follow-on patch.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-15-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
CXL RAS capabilities must be enabled and accessible as soon as the CXL
endpoint is detected in the PCI hierarchy and bound to the cxl_pci
driver. This needs to be independent of other modules such as cxl_port
or cxl_mem.
CXL RAS capabilities reside in the Component Registers. For an RCH
this is determined by probing RCRB which is implemented very late once
the CXL Memory Device is created.
Change this by moving the RCRB probe to the cxl_pci driver. Do this by
using a new introduced function cxl_pci_find_port() similar to
cxl_mem_find_port() to determine the involved dport by the endpoint's
PCI handle. Plug this into the existing cxl_pci_setup_regs() function
to setup Component Registers. Probe the RCRB in case the Component
Registers cannot be located through the CXL Register Locator
capability.
This unifies code and early sets up the Component Registers at the
same time for both, VH and RCH mode. Only the cxl_pci driver is
involved for this. This allows an early mapping of the CXL RAS
capability registers.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-14-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In order to move the RCH dport component register setup to cxl_pci the
base address must be stored in CXL device state (cxlds) for both
modes, RCH and VH. Store it in cxlds->component_reg_phys and use it
for endpoint creation.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-13-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When probing the Component Registers in function cxl_probe_regs()
there are also checks for the existence of the HDM and RAS
capabilities. The checks may fail for components that do not implement
the HDM capability causing the Component Registers setup to fail too.
Remove the checks for a generalized use of cxl_probe_regs() and check
them directly before mapping the RAS or HDM capabilities. This allows
it to setup other Component Registers esp. of an RCH Downstream Port,
which will be implemented in a follow-on patch.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-12-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The Component Register base address @component_reg_phys is no longer
used after the rework of the Component Register setup which now uses
struct member @comp_map instead. Remove the base address.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-11-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
During a Host Bridge's downstream port enumeration the CHBS entries in
the CEDT table are parsed, its Component Register base address
extracted and then stored in struct cxl_dport. The CHBS may contain
either the RCRB (RCH mode) or the Host Bridge's Component Registers
(CHBCR, VH mode). The RCRB further contains the CXL downstream port
register base address, while in VH mode the CXL Downstream Switch
Ports are visible in the PCI hierarchy and the DP's component regs are
disovered using the CXL DVSEC register locator capability. The
Component Registers derived from the CHBS for both modes are different
and thus also must be treated differently. That is, in RCH mode, the
component regs base should be bound to the dport, but in VH mode to
the CXL host bridge's port object.
The current implementation stores the CHBCR in addition in struct
cxl_dport and copies it later from there to struct cxl_port. As a
result, the dport contains the wrong Component Registers base address
and, e.g. the RAS capability of a CXL Root Port cannot be detected.
To fix the CHBCR binding, attach it directly to the Host Bridge's
@cxl_port structure. Do this during port creation of the Host Bridge
in add_host_bridge_uport(). Factor out CHBS parsing code in
add_host_bridge_dport() and use it in both functions.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-10-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Just moving code to reorder functions to later share cxl_get_chbs()
with add_host_bridge_uport().
This makes changes in the next patch visible. No other changes at all.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-9-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The endpoint implements component register setup code. Refactor it for
reuse with RCRB, downstream port, and upstream port setup.
Move PCI specifics from cxl_setup_regs() into cxl_pci_setup_regs().
Move cxl_setup_regs() into cxl/core/regs.c and export it. This also
includes supporting static functions cxl_map_registerblock(),
cxl_unmap_register_block() and cxl_probe_regs().
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-8-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The corresponding device of a register mapping is used for devm
operations and logging. For operations with struct cxl_register_map
the device needs to be kept track separately. To simpify the involved
function interfaces, add @dev to cxl_register_map.
While at it also reorder function arguments of cxl_map_device_regs()
and cxl_map_component_regs() to have the object @cxl_register_map
first.
As a result a bunch of functions are available to be used with a
@cxl_register_map object.
This patch is in preparation of reworking the component register setup
code.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-7-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
For symmetry with the recent rename of ->dport_dev for a 'struct
cxl_dport', add the "_dev" suffix to the ->uport property of a 'struct
cxl_port'. These devices represent the downstream-port-device and
upstream-port-device respectively in the CXL/PCIe topology.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-6-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Reading code like dport->dport does not immediately suggest that this
points to the corresponding device structure of the dport. Rename
struct member @dport to @dport_dev.
While at it, also rename @new argument of add_dport() to @dport. This
better describes the variable as a dport (e.g. new->dport becomes to
dport->dport_dev).
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-5-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Prepare cxl_probe_rcrb() for retrieving more than just the component
register block. The RCH AER handling code wants to get back to the AER
capability that happens to be MMIO mapped rather then configuration
cycles.
Move RCRB specific downstream port data, like the RCRB base and the
AER capability offset, into its own data structure ('struct
cxl_rcrb_info') for cxl_probe_rcrb() to fill. Extend 'struct
cxl_dport' to include a 'struct cxl_rcrb_info' attribute.
This centralizes all RCRB scanning in one routine.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-4-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The RCRB is extracted already during ACPI CEDT table parsing while the
data of this is needed not earlier than dport creation. This
implementation comes with drawbacks: During ACPI table scan there is
already MMIO access including mapping and unmapping, but only ACPI
data should be collected here. The collected data must be transferred
through a couple of interfaces until it is finally consumed when
creating the dport. This causes complex data structures and function
interfaces. Additionally, RCRB parsing will be extended to also
extract AER data, it would be much easier do this at a later point
during port and dport creation when the data structures are available
to hold that data.
To simplify all that, probe the RCRB at a later point during RCH
downstream port creation. Change ACPI table parser to only extract the
base address of either the component registers or the RCRB. Parse and
extract the RCRB in devm_cxl_add_rch_dport().
This is in preparation to centralize all RCRB scanning.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-2-terry.bowman@amd.com
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20230622205523.85375-3-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This device is an iteration over the AOKZOE A1 with the same EC mapping
and features.
It also has support for tt_toggle.
Signed-off-by: Jerrod Frost <jcfrosty@proton.me>
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20230625012347.121352-2-samsagax@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Remove ->sendpage() and ->sendpage_locked(). sendmsg() with
MSG_SPLICE_PAGES should be used instead. This allows multiple pages and
multipage folios to be passed through.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-afs@lists.infradead.org
cc: mptcp@lists.linux.dev
cc: rds-devel@oss.oracle.com
cc: tipc-discussion@lists.sourceforge.net
cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20230623225513.2732256-16-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage. This allows
multiple pages and multipage folios to be passed through.
TODO: iscsit_fe_sendpage_sg() should perhaps set up a bio_vec array for the
entire set of pages it's going to transfer plus two for the header and
trailer and page fragments to hold the header and trailer - and then call
sendmsg once for the entire message.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mike Christie <michael.christie@oracle.com>
cc: Maurizio Lombardi <mlombard@redhat.com>
cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
cc: "Martin K. Petersen" <martin.petersen@oracle.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: open-iscsi@googlegroups.com
Link: https://lore.kernel.org/r/20230623225513.2732256-13-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage. This allows
multiple pages and multipage folios to be passed through.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
cc: Lee Duncan <lduncan@suse.com>
cc: Chris Leech <cleech@redhat.com>
cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
cc: "Martin K. Petersen" <martin.petersen@oracle.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: open-iscsi@googlegroups.com
Link: https://lore.kernel.org/r/20230623225513.2732256-12-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use sendmsg() conditionally with MSG_SPLICE_PAGES in _drbd_send_page()
rather than calling sendpage() or _drbd_no_send_page().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Philipp Reisner <philipp.reisner@linbit.com>
cc: Lars Ellenberg <lars.ellenberg@linbit.com>
cc: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: drbd-dev@lists.linbit.com
Link: https://lore.kernel.org/r/20230623225513.2732256-11-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When transmitting data, call down into TCP using a single sendmsg with
MSG_SPLICE_PAGES to indicate that content should be spliced rather than
copied instead of calling sendpage.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Willem de Bruijn <willemb@google.com>
cc: Keith Busch <kbusch@kernel.org>
cc: Jens Axboe <axboe@fb.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Chaitanya Kulkarni <kch@nvidia.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-nvme@lists.infradead.org
Link: https://lore.kernel.org/r/20230623225513.2732256-9-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When transmitting data, call down into TCP using a sendmsg with
MSG_SPLICE_PAGES instead of sendpage.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Willem de Bruijn <willemb@google.com>
cc: Keith Busch <kbusch@kernel.org>
cc: Jens Axboe <axboe@fb.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Chaitanya Kulkarni <kch@nvidia.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-nvme@lists.infradead.org
Link: https://lore.kernel.org/r/20230623225513.2732256-8-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As MSG_SENDPAGE_NOTLAST is being phased out along with sendpage(), don't
use it further in than the sendpage methods, but rather translate it to
MSG_MORE and use that instead.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: Bernard Metzler <bmt@zurich.ibm.com>
cc: Jason Gunthorpe <jgg@ziepe.ca>
cc: Leon Romanovsky <leon@kernel.org>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jakub Sitnicki <jakub@cloudflare.com>
cc: David Ahern <dsahern@kernel.org>
cc: Karsten Graul <kgraul@linux.ibm.com>
cc: Wenjia Zhang <wenjia@linux.ibm.com>
cc: Jan Karcher <jaka@linux.ibm.com>
cc: "D. Wythe" <alibuda@linux.alibaba.com>
cc: Tony Lu <tonylu@linux.alibaba.com>
cc: Wen Gu <guwen@linux.alibaba.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: Steffen Klassert <steffen.klassert@secunet.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20230623225513.2732256-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-06-21
mlx5 driver minor cleanup and fixes to net-next
* tag 'mlx5-updates-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Remove pointless vport lookup from mlx5_esw_check_port_type()
net/mlx5: Remove redundant check from mlx5_esw_query_vport_vhca_id()
net/mlx5: Remove redundant is_mdev_switchdev_mode() check from is_ib_rep_supported()
net/mlx5: Remove redundant MLX5_ESWITCH_MANAGER() check from is_ib_rep_supported()
net/mlx5e: E-Switch, Fix shared fdb error flow
net/mlx5e: Remove redundant comment
net/mlx5e: E-Switch, Pass other_vport flag if vport is not 0
net/mlx5e: E-Switch, Use xarray for devcom paired device index
net/mlx5e: E-Switch, Add peer fdb miss rules for vport manager or ecpf
net/mlx5e: Use vhca_id for device index in vport rx rules
net/mlx5: Lag, Remove duplicate code checking lag is supported
net/mlx5: Fix error code in mlx5_is_reset_now_capable()
net/mlx5: Fix reserved at offset in hca_cap register
net/mlx5: Fix SFs kernel documentation error
net/mlx5: Fix UAF in mlx5_eswitch_cleanup()
====================
Link: https://lore.kernel.org/r/20230623192907.39033-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next
Miquel Raynal says:
====================
Core WPAN changes:
- Support for active scans
- Support for answering BEACON_REQ
- Specific MLME handling for limited devices
WPAN driver changes:
- ca8210:
- Flag the devices as limited
- Remove stray gpiod_unexport() call
* tag 'ieee802154-for-net-next-2023-06-23' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next:
ieee802154: ca8210: Remove stray gpiod_unexport() call
ieee802154: ca8210: Flag the driver as being limited
net: ieee802154: Handle limited devices with only datagram support
mac802154: Handle received BEACON_REQ
ieee802154: Add support for allowing to answer BEACON_REQ
mac802154: Handle active scanning
ieee802154: Add support for user active scan requests
====================
Link: https://lore.kernel.org/r/20230623195506.40b87b5f@xps-13
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
64-bit DMA detection will fail if axienet was started before (by boot
loader, boot ROM, etc). In this state axienet will not start properly.
XAXIDMA_TX_CDESC_OFFSET + 4 register (MM2S_CURDESC_MSB) is used to detect
64-bit DMA capability here. But datasheet says: When DMACR.RS is 1
(axienet is in enabled state), CURDESC_PTR becomes Read Only (RO) and
is used to fetch the first descriptor. So iowrite32()/ioread32() trick
to this register to detect 64-bit DMA will not work.
So move axienet reset before 64-bit DMA detection.
Fixes: f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20230622192245.116864-1-fido_max@inbox.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the devres variant of stmmac_pltfr_probe() and finally drop the
remove() callback entirely.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230623100417.93592-12-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a devres variant of stmmac_pltfr_probe() which allows users to
skip calling stmmac_pltfr_remove() at driver detach.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230623100417.93592-11-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Significantly simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt(). This allows to drop the goto jumps
entirely.
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230623100417.93592-10-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a devres variant of stmmac_probe_config_dt() that allows users to
skip calling stmmac_remove_config_dt() at driver detach.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230623100417.93592-9-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a variant of stmmac_pltfr_remove() that only frees resources
allocated by stmmac_pltfr_probe() and - unlike stmmac_pltfr_remove() -
does not call stmmac_remove_config_dt().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230623100417.93592-8-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Shrink the code and remove labels by using the new stmmac_pltfr_probe()
function.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230623100417.93592-7-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement stmmac_pltfr_probe() which is the logical API counterpart
for stmmac_pltfr_remove(). It calls the platform's init() callback and
then probes the stmmac device.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230623100417.93592-6-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Shrink the code in dwmac-generic by using the new stmmac_pltfr_exit()
helper.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230623100417.93592-5-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a helper wrapper around calling the platform's exit() callback.
This allows users to skip checking if the callback exists.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230623100417.93592-4-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Shrink the code in dwmac-generic by using the new stmmac_pltfr_init()
helper.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230623100417.93592-3-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a helper wrapper around calling the platform's init() callback.
This allows users to skip checking if the callback exists.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230623100417.93592-2-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-06-22 (ice)
This series contains updates to ice driver only.
Jake adds a slight wait on control queue send to reduce wait time for
responses that occur within normal times.
Maciej allows for hot-swapping XDP programs.
Przemek removes unnecessary checks when enabling SR-IOV and freeing
allocated memory.
Christophe Jaillet converts a managed memory allocation to a regular one.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: use ice_down_up() where applicable
ice: Remove managed memory usage in ice_get_fw_log_cfg()
ice: remove null checks before devm_kfree() calls
ice: clean up freeing SR-IOV VFs
ice: allow hot-swapping XDP programs
ice: reduce initial wait for control queue messages
====================
Link: https://lore.kernel.org/r/20230622183601.2406499-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported use-after-free in __gtp_encap_destroy(). [0]
It shows the same process freed sk and touched it illegally.
Commit e198987e7dd7 ("gtp: fix suspicious RCU usage") added lock_sock()
and release_sock() in __gtp_encap_destroy() to protect sk->sk_user_data,
but release_sock() is called after sock_put() releases the last refcnt.
[0]:
BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
BUG: KASAN: slab-use-after-free in atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline]
BUG: KASAN: slab-use-after-free in queued_spin_lock include/asm-generic/qspinlock.h:111 [inline]
BUG: KASAN: slab-use-after-free in do_raw_spin_lock include/linux/spinlock.h:186 [inline]
BUG: KASAN: slab-use-after-free in __raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline]
BUG: KASAN: slab-use-after-free in _raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178
Write of size 4 at addr ffff88800dbef398 by task syz-executor.2/2401
CPU: 1 PID: 2401 Comm: syz-executor.2 Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x72/0xa0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:351 [inline]
print_report+0xcc/0x620 mm/kasan/report.c:462
kasan_report+0xb2/0xe0 mm/kasan/report.c:572
check_region_inline mm/kasan/generic.c:181 [inline]
kasan_check_range+0x39/0x1c0 mm/kasan/generic.c:187
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline]
queued_spin_lock include/asm-generic/qspinlock.h:111 [inline]
do_raw_spin_lock include/linux/spinlock.h:186 [inline]
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline]
_raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:355 [inline]
release_sock+0x1f/0x1a0 net/core/sock.c:3526
gtp_encap_disable_sock drivers/net/gtp.c:651 [inline]
gtp_encap_disable+0xb9/0x220 drivers/net/gtp.c:664
gtp_dev_uninit+0x19/0x50 drivers/net/gtp.c:728
unregister_netdevice_many_notify+0x97e/0x1520 net/core/dev.c:10841
rtnl_delete_link net/core/rtnetlink.c:3216 [inline]
rtnl_dellink+0x3c0/0xb30 net/core/rtnetlink.c:3268
rtnetlink_rcv_msg+0x450/0xb10 net/core/rtnetlink.c:6423
netlink_rcv_skb+0x15d/0x450 net/netlink/af_netlink.c:2548
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x700/0x930 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x91c/0xe30 net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0x1b7/0x200 net/socket.c:747
____sys_sendmsg+0x75a/0x990 net/socket.c:2493
___sys_sendmsg+0x11d/0x1c0 net/socket.c:2547
__sys_sendmsg+0xfe/0x1d0 net/socket.c:2576
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f1168b1fe5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007f1167edccc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f1168b1fe5d
RDX: 0000000000000000 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f1168b80530 R15: 0000000000000000
</TASK>
Allocated by task 1483:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x59/0x70 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:186 [inline]
slab_post_alloc_hook mm/slab.h:711 [inline]
slab_alloc_node mm/slub.c:3451 [inline]
slab_alloc mm/slub.c:3459 [inline]
__kmem_cache_alloc_lru mm/slub.c:3466 [inline]
kmem_cache_alloc+0x16d/0x340 mm/slub.c:3475
sk_prot_alloc+0x5f/0x280 net/core/sock.c:2073
sk_alloc+0x34/0x6c0 net/core/sock.c:2132
inet6_create net/ipv6/af_inet6.c:192 [inline]
inet6_create+0x2c7/0xf20 net/ipv6/af_inet6.c:119
__sock_create+0x2a1/0x530 net/socket.c:1535
sock_create net/socket.c:1586 [inline]
__sys_socket_create net/socket.c:1623 [inline]
__sys_socket_create net/socket.c:1608 [inline]
__sys_socket+0x137/0x250 net/socket.c:1651
__do_sys_socket net/socket.c:1664 [inline]
__se_sys_socket net/socket.c:1662 [inline]
__x64_sys_socket+0x72/0xb0 net/socket.c:1662
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 2401:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2e/0x50 mm/kasan/generic.c:521
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free mm/kasan/common.c:200 [inline]
__kasan_slab_free+0x10c/0x1b0 mm/kasan/common.c:244
kasan_slab_free include/linux/kasan.h:162 [inline]
slab_free_hook mm/slub.c:1781 [inline]
slab_free_freelist_hook mm/slub.c:1807 [inline]
slab_free mm/slub.c:3786 [inline]
kmem_cache_free+0xb4/0x490 mm/slub.c:3808
sk_prot_free net/core/sock.c:2113 [inline]
__sk_destruct+0x500/0x720 net/core/sock.c:2207
sk_destruct+0xc1/0xe0 net/core/sock.c:2222
__sk_free+0xed/0x3d0 net/core/sock.c:2233
sk_free+0x7c/0xa0 net/core/sock.c:2244
sock_put include/net/sock.h:1981 [inline]
__gtp_encap_destroy+0x165/0x1b0 drivers/net/gtp.c:634
gtp_encap_disable_sock drivers/net/gtp.c:651 [inline]
gtp_encap_disable+0xb9/0x220 drivers/net/gtp.c:664
gtp_dev_uninit+0x19/0x50 drivers/net/gtp.c:728
unregister_netdevice_many_notify+0x97e/0x1520 net/core/dev.c:10841
rtnl_delete_link net/core/rtnetlink.c:3216 [inline]
rtnl_dellink+0x3c0/0xb30 net/core/rtnetlink.c:3268
rtnetlink_rcv_msg+0x450/0xb10 net/core/rtnetlink.c:6423
netlink_rcv_skb+0x15d/0x450 net/netlink/af_netlink.c:2548
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x700/0x930 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x91c/0xe30 net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0x1b7/0x200 net/socket.c:747
____sys_sendmsg+0x75a/0x990 net/socket.c:2493
___sys_sendmsg+0x11d/0x1c0 net/socket.c:2547
__sys_sendmsg+0xfe/0x1d0 net/socket.c:2576
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
The buggy address belongs to the object at ffff88800dbef300
which belongs to the cache UDPv6 of size 1344
The buggy address is located 152 bytes inside of
freed 1344-byte region [ffff88800dbef300, ffff88800dbef840)
The buggy address belongs to the physical page:
page:00000000d31bfed5 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800dbeed40 pfn:0xdbe8
head:00000000d31bfed5 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
memcg:ffff888008ee0801
flags: 0x100000000010200(slab|head|node=0|zone=1)
page_type: 0xffffffff()
raw: 0100000000010200 ffff88800c7a3000 dead000000000122 0000000000000000
raw: ffff88800dbeed40 0000000080160015 00000001ffffffff ffff888008ee0801
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88800dbef280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800dbef300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88800dbef380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88800dbef400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88800dbef480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: e198987e7dd7 ("gtp: fix suspicious RCU usage")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20230622213231.24651-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-06-22 (iavf)
This series contains updates to iavf driver only.
Przemek defers removing, previous, primary MAC address until after
getting result of adding its replacement. He also does some cleanup by
removing unused functions and making applicable functions static.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: make functions static where possible
iavf: remove some unused functions and pointless wrappers
iavf: fix err handling for MAC replace
====================
Link: https://lore.kernel.org/r/20230622165914.2203081-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The referenced patch is causing build errors when ETHERNET=y and
FDDI=m. While we work out the preferred patch(es), revert this patch
to make the pain go away.
Fixes: 128272336120 ("s390/net: lcs: use IS_ENABLED() for kconfig detection")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202306202129.pl0AqK8G-lkp@intel.com
Cc: Alexandra Winter <wintera@linux.ibm.com>
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230622155409.27311-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Linux provides phy_set_bits() helper so let's drop brcm_phy_setbits() and
use phy_set_bits() in its place.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230622184721.24368-1-giulio.benetti@benettiengineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
